This is an agreement between AW Service International Corp. and the license-holders of
AW Service software. The license-holder agrees with the following bound consents:
1. AW Service is not responsible for any illegal activities or damage caused by the
license-holder(s) or user(s) while using AW Service International Corp. software.
AW Service International Corp. is also excluded from any legal responsibilities for
any damages or activities during normal usage of its software.
2. AW Service International Corp. will not guarantee any functionality, implications of
the software, or results of operations. The license-holder acknowledges and accepts
his/her own responsibilities to run the program in a suitable environment.
3. The license-holder(s) shall not duplicate, loan, rent, or lease AW Service software
partially or wholly without explicit and intentional consent from AW Service
International Corp. Purchasers pay for license(s) to use the software rather than
copies of the software itself. License-holders are allowed use of the software unless
the license is revoked by AW Service International Corp.
4. AW Service International Corp. may charge fees for additional services (i.e.
installation key transfer from one computer to another) and has the authority to do so
without any further notifications.
5. Only users who have paid for license(s) are allowed to use AW Service software
tools. The purchaser(s) should retain all purchase receipts for verification at any time.
6. Because AW Service International Corp.’s software and its design include trade
secrets, the purchaser agrees that, without consent from AW Service International
Corp., the purchaser can not release any such related information to other parties.
7. The purchaser is responsible for keeping AW Service International Corp. software
away from any criminals domestic or abroad.
8. By using AW Service International software, the purchaser(s) is/are bound to all the
legal requirements presented in this agreement.
9. Violation of this agreement partially or wholly gives AW Service International Corp.
justification to revoke a license or licenses. Additionally, claims or lawsuits against
violators of the agreement will be pursued to the maximum extent that the current
10. AW Service International Corp. has the ultimate rights to interpret any statements
contained in this agreement.
Copyright@ AW Service International Corp
AW Service International Corp. Web measurement, traffic generating tools
This document is a general guide to use AW service international web
measurement and testing tool, a prepaid-to-license web traffic measuring and generating
tool. This tool is an application designed primarily for performing network stress tests,
acquiring websites/webpages instantaneous traffic response time, and analyzing and
verifying web design. This tool is run on Windows 2000, XP and its after versions.
Before you use AW service international web measurement tools, you will need to install
the program, concur with the user agreement, and obtain your activation key from AW
Service international Corp. Performing main functionalities is only possible if you are in
possession of or will be in possession of a transaction receipt for user license(s). User
licenses can be purchased by contacting AW Service International Corp. Just send an
email to them at following email address.
421 N. NW Highway
Barrington, IL 60010
I. Installation Procedure
1. Go to http://www.awservice.net/download/measure.exe and click the “Download
measure.exe” blue text.
2. Save measure.exe to “My Documents” or any other accessible destination
3. After the download has completed, click Run on the dialog box.
4. Expand or maximize the window that appears in the upper-left corner of your
5. Carefully read the Legal Statement and write down/copy the activation key
written below the Legal Statement.
6. Send us an email message with all the information we required to
Name of organization or person.
Contact email address (official).
Receipt no. of payment.
Activation key no. generated by computer. (You just paste the no.).
Telephone Number (optional)
IP address of the machine you are using:
7. We will send you back an installation key within 2 business days. This key has to
be entered to the program installation key area promptly within 3 business days
after you receive the key, otherwise, the key will expire. Read all the legal
agreements and if you agree, please click the “agree all and key verification”
If you enter the correct key, it will prompt out message that your key is correct.
Else, the key is not right. You should contact the AW Service quickly and obtain
a new installation key. If you are successful, you are required to run the program
8. Your installation is completed. You run the program measure.exe. You can run
with Start Run and select the measure.exe. or start the program under the installed
II. Functionalities and Usage
i. Traffic Generation: Sending ping and http requests to URLs and web pages to
ii. Response time (Delay) Measurement: Obtaining and recording the amount of
time used to complete a ping or http request to URLs and
iii. First and Last Packet response Times in the http response:
Obtaining and recording the response times of the first and last packets sent to
URLs and web pages after you sent out a http request
packet. The first packet is a measurement of network
delay and the last packet response time is the
webpage loading and communication delay
(excluding links in the web pages).
iv. Periodic Traffic Generation: Performing Traffic Generation over a period of
time at different intervals.
v. System analysis: Recording Response time (Delay) Measurement or First/Last
Packet Times in a res.txt file for your future analysis and
vi. Webpage analyzer: A tool to let you analyze all the webpage access time,
include total number of links in the WebPages and their
download time. Those links affect all the web page
accessing time. Web designer can use this analyzer to
verify and improve their web design. You will be given
Total time calculated, Total links and communication
time for each of webpage contained links. Total time
calculated is the time that the webpage accessing time
(including each link in the webpage). The Total links is the
number of links that the webpage contains. Normally the
webpage accessing time is varied among different browser,
but the communication time is the same, only the browser
processing time varies. The Total time calculated is
generally smaller than time of browsing, it is 0.5 to 0.75
vii. Webpage testing configuration saving and loading.
You can save your URLs and load them back, there are two
buttons for those functions.
viii. Measurement results ping and webpage can be accessed in res.txt file. If you
perform a 1 day stress test, you should be able to find out all the test results in the res.txt
file. For each running of the test, you only can save once to the file (close of the file).
Else, writing error appears. You have to stop the test, and start the tests again.
AWS web measurement tools can be used to generate traffic and measure to results
at the same time. To place more loads and stress, multiple running copies can be
used to simulate the real environment.
Important notice: For some window system, the system is defaulted to go into sleep
mode when no key or mouse activities for a while, e.g. Windows Vista. It is
important for you go to the control panel, power setting to set the sleep mode off,
before run any duration measurement. Else, the measurement will be suspended by
Windows when the power saving mode kicks in.
B. User interface:
a. Stop Measurement: Ends all tasks in progress.
b. Save Measurement: Saves the text displayed on the Results output box to a
file named res.txt.
c. Clear Status: Resets the Status output box and erases all messages
d. Disable the software: Disables measure.exe and opens a dialog box with a
deactivation key. After hitting this key, you must exchange the deactivation
key for a new installation key to enable the software’s tools.
e. Start Measurement:
Button to start traffic generation and measurement after all the selections has
f. Save configuration: This button saves the URLs in the input fields. The
configuration will be saved in measure.config, you can copy this file to
somewhere else for backup, and replace it if needed.
g. Load config button: This is a button to load URLs information from the file
ii. Field of selections and inputs
Run Once. You only run measurement or traffic generation task once.
Util specific time- You run the measurement task until the stop meaurement
button is selected. Or the specific time you selected is reached. You can
choose the time and date in the select box below the Duration field.
Webpage analyzer: This is a very useful feature to analyze the webpages
accessing time and it could give out all the weblinks in the webpage and
retrieve live accessing time for each links. It can help designer to improve on
web page designs and reduce the webpages accessing time. The feature is only
available when you select HTTP traffic and only one link can be analyzed at
the same time.
Ping – ping traffic.
Web http Get – Http get requests to the web site, specified in the test target.
Ping and http-send http requests and ping to the test targets. Make sure the
target can be pinged. Else, run one copy in one computer for the ping and
another computer for the http requests.
Frequency: Interval between the send-out requests. This field allow you to
test how many users you have. If you have each user click once per 10 sec.
then once per sec. is 10 users. You can use multiple copies to run on different
computer to mimic the real environment.
Test targets: You can input upto 23 ip address or URLs, pls notice, those
URL should not include http:// prefix. You have to type in those test targets or
load the previous saved test targets.
Output: Status panel show you the status of the testing task, the results
panel shows you all the testing results.
This software is designed to be run on Window XP, Vista, and Windows 7 .
Each copy run on one machine is limited to measure or generate traffic to 23
targets. Each target name is limited to 50 chars.
Results field will show the results of the task running. It will show when the
measuring task is performed, and the results of tests.
The system does not allow multiple measure.exe run on one machine.
Multiple licenses and machines are required if you want to run multiple copies
of the measure.exe.
Ping target is ip address of the target (IP 4 address).
You can select what traffic load you want to test, you can have a few stations
using our AWS measurement software to generate the traffic and one station
use web analyzer to measure any webpages live performance. There is no
limit on traffic loads.
Errors and Problems or improvement requests
Please contact: firstname.lastname@example.org
If you like to upgrade widows system or wipe out AWS
software for some reasons, before you wipe out your
windows system, please disable the AWS software, record
the disable key, we can’t help you without this disable key.
Please be aware! We also could charge you a service fee, if
you frequently disable the software and demand service for
new keys (with/without disable keys).
We suggest users to install AWS software on a stable machine. If you want to move
among different machines very often, you shall buy multiple copies of AWS
software. It is not a pleasant procedure to disable software and demand a new key.
Discount is available for multiple copies.