DOD-250 pre-amp overdrive pedal parts list: by olTSOqJu

VIEWS: 0 PAGES: 2

									  DOD-250 pre-amp overdrive pedal parts list:

  Resistors:
Value – all ¼ watt 1% tolerance
                                                                          Quantity
4.7KΩ                                       yellow/violet/black/brown     2
10KΩ                                          Brown/black/black/red       2
22KΩ (22K – 47K will do fine)                    Red/red/black/red        2
470KΩ                                       yellow /violet/black/orange   1
1MΩ                                          brown/black/black/yellow     1

  POTs: (potentiometers)


Value
                                                                          Quantity


100KΩ log ‘A’ type                                                        1
500KΩ log ‘A’ type (or linear ‘B’ type)                                   1

  Capacitors:
Value
                                                                          Quantity

27pF ceramic disc                                                         1


1nF/63V MKT                                                               2



150nF/63V MKT                                                             1



4.7uF/10-35V electrolytic                                                 1


10uF/16V electrolytic                                                     1

  Semiconductor devices:

1N4148 diode                                                              2



4558 or TL062 op-amp 8 pin                                                1



LED various colours to choose from                                        1
    Hardware:


 Phono jack sockets with DC switching           2




 Alloy case type Diecast Aluminium Box w/
                                                1
 flanges 110x83x45 IP65




 9 pole DTDP stomp switch                       1




Battery snap                                    1


 DC power socket with battery switch
                                                1
 (optional)



 Retro knobs                                    2




 Vero Board 150x100mm 1" Pitch (chopped in
                                                1
 half)




 Various M3 nuts, bolts & washers as required



 Hook-up wire & solder etc.

								
To top