W199 Field 17 30061

							   TECHNICAL DATA SHEET /



NIBOFLOOR S 800 - solvent free -
MULTI - PURPOSE FLOORING ADHESIVE




Range of application:
Multi-functional dispersion adhesive for PVC coverings and tiles, CV coverings,
linoleum, rubber floorings with a smooth top-side according to DIN 16850, textile
coverings with various types of backings, sisal and coconut coverings. For textile
coverings with high tension like needle felt, we recommend Bostik Power-Tex.

Special advantages:
                -   very low emission
                -   solvent free
                -   efficient
                -   fast tack
                -   profitable
                -   high final bond strength

Technical Data:
Base:                                   Dispersion system
Colour:                                 Beige-white
Viscosity:                              Spreadable
Density:                                1,3 g/cm3
Processing temperature:                 Preferably between + 15° C and + 20° C
Recommended notched trowel:             A 2 - Consumption: Approx. 320 g/m2
                                        B 1 - Consumption: Approx. 380 g/m2
                                        B 2 - Consumption: Approx. 650 g/m2
                                        B 3 - Consumption: Approx. 750 g/m2
                                        Pay attention that the backing of the covering is
                                        entirely moistened. For coarse-structured
                                        surfaces a trowel with larger notches and a
                                        corresponding consumption has to be used.
Setting time:                           Approx. 24 hours
Applicable under castor wheels
(rolls accord. to DIN EN 12529):          Yes
Applicable on underfloor heating:       Yes - Pay attention to low moisture content of the
                                        subfloor
German GISCODE:                         D1 -Solvent free according to German TRGS 610
German GEV-EMICODE:                           very low emission accord. to GEV-regulations
Hazardous goods regulation:                   No
Cleaning agent:                               Before setting: Water
Storage:                                      To be protected from frost.
                                              Can be stored for 12 months.

Preparation of the subfloor:
According to DIN 18365 the subfloor has to be even, permanently dry, clean, free from
cracks, tension and pressure proof. If necessary, the subfloor has to be pre-treated. Use
adequate primers and levelling compounds. Mastic asphalt and other non-absorbent
subfloors always have to be levelled with a layer of at least 2 mm thickness.

Processing:
Apply NIBOFLOOR S 800 uniformly with a notched trowel onto the subfloor.
Corresponding to the covering a short open time can be necessary. Start laying and rub
on the covering well. After 30 - 40 minutes it is necessary to rub on the covering again.
Begin sealing the joints after 24 hours at the earliest.
Pay attention to the flooring manufacturer‘s instructions, especially in view of
acclimatising the covering.


Buckets:


 850 g tin                          Article -No. 800 003 1                    12 pieces per carton /
                                                                              30 pieces per pallet
 3,5 kg bucket                      Article -No.   800 003 4                  90 pieces per pallet
   7 kg bucket                      Article -No.   800 003 5                  64 pieces per pallet
  14 kg bucket                      Article -No.   800 003 6                  33 pieces per pallet
  22 kg bucket                      Article -No.   800 003 7                  21 pieces per pallet
150 kg drum                         Article -No.   800 067 8                   2 pieces per pallet




With these instructions we endeavour to give advice to the best of our knowledge based on experience and tests.
However, we cannot be accept any liability for the processing results in individual cases on account of the wide
spectrum of possible applications and the storage and processing conditions for our products which are beyond our
squere of influence. We recommend you always carry out your own tests. Our technical and commercial advisory
service can be consulted. This edition cancels all previous ones. Edition: 28/10/2004