Information on circular saw blades
Practical Points on Changing the Circular
TCT circular saws are the multipurpose saw blades which are unique creation and invention and
all the more industrially tough and ergonomic in design. The saw blades beat your expectation and
it would bring a dynamic change and difference for all the industrial design operations.
Circular saw blades are one of the sought after power tools used in the industry that have the
capabilities for practically cutting any material in just any way and for just any purpose. The saw
blades are universally used for various industrial cutting operations and these bring in easy cutting
With the introduction of technically superior and functionally outsmart tools, Circular saw
blades have become the advantageous cutting tools and moreover, one can easily replace the new
circular saw bladed with the new ones by following simple and easy steps. It will not take much of
man hours and all you need to have in your possession is adjustable wrench. You will find that the
cutting machine is ready with the new circular saw blades and you will enjoy great cutting session.
However, if we take into consideration the real time procedures in replacing the old and worn out
circular saw blades with new ones, there are step by step procedures which need to put into
The first thing which needs to be done is disengage the tool by turning the tool off and then
removing the battery or unplugging the electric cod from the plug.
Next, you make the saw rest on the solid iron table and let the blade hang out from the table’s edge.
If there are clamps on the table then you can use them to fix the saw to the bench for handy blade
replacements, or else you can also use your weight for securing the saw steady in its position.
Cover the blades with the protective blade guard and hold the guard with thumb for the purpose of
securing the saw to the table. Now, gradually rotate the saw blade with your hand for finding the
offset hole where the bit is inserted and prevents the movement of blade any further.
You should attach the adjustable wrench into the blade bolt in the saw blade. The bolt
will fix the blade to the saw and the blade will remain completely secured. Eliminate
the bolt, the bit, and the old blade. Gradually slide the new circular saw blade over
the blade hub and re insert the bit directly inside the offset hole. Rotate the blade in
counter clock wise direction and everything is done.