Docstoc

iso_update_march2011-en

Document Sample
iso_update_march2011-en Powered By Docstoc
					International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an
International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When
consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft
International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is
subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.




CD registered

Period from 01 February to 28 February 2011

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.



TC 4                            Rolling bearings

ISO 1206:2001/CD Amd 1          Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions
                                and tolerances — Amendment 1: Tolerance limits for shaft raceway and housing bore diameters

ISO 3245:2007/CD Amd 1          Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and
                                tolerances — Amendment 1: Tolerance limits for shaft raceway and housing bore diameters

TC 8                            Ships and marine technology

ISO/DPAS 30004                  Ship recycling management systems — Guidelines for implementing ISO 30000

ISO/CD 13073-2                  Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 2: Marine
                                environmental risk assessment method for anti-fouling systems on ships using biocidally active
                                substances

ISO/CD 16165                    Ships and marine technology — Marine environment protection — Terminology relating to oil spill
                                response

ISO/CD 16304                    Ships and marine technology — Marine environment protection — Arrangement and management of
                                port waste reception facilities

ISO/CD 16855                    Ships and Marine Technology — Loose gear of lifting appliances on ships — General requirements

ISO/CD 16856                    Ships and Marine Technology — Loose gear of lifting appliances on ships — Hooks

ISO/CD 16857                    Ships and Marine Technology — Loose gear of lifting appliances on ships — Shackles

ISO/CD 16858                    Ships and Marine Technology — Loose gear of lifting appliances on ships — Pulleys

TC 22                           Road vehicles
ISO/CD 6624-2     Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron

ISO/CD 6624-4     Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel

ISO/CD 6722-2     Road vehicles - 60 V and 600 V single-core cables — Part 2: Dimensions test methods and
                  requirements for aluminium conductor cables

TC 30             Measurement of fluid flow in closed conduits

ISO/CD 17089-2    Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial
                  applications

TC 34             Food products

ISO/CD 14477      Vegetable fats and oils — Determination of triacylglycerols — Method by high performance liquid
                  chromatography (HPLC)

TC 35             Paints and varnishes

ISO/CD 16474-1    Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance

ISO/CD 16474-2    Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

ISO/CD 16474-3    Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV
                  lamps

ISO/CD 16474-4    Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Carbon-arc lamps

TC 42             Photography

ISO/CD 15781      Photography — Digital cameras — Measuring shooting time lag, shutter release time lag, shooting
                  rate, and start-up time

TC 45             Rubber and rubber products

ISO/CD 11619      Specification for polyurethane tubing for use primarily in pneumatic installations

ISO/CD 2285       Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of
                  tension set, elongation and creep under constant tensile load

ISO/CD 5892       Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification

ISO/CD 14285      Rubber and plastics gloves for the food industry and food services — Specification

TC 59             Buildings and civil engineering works

ISO/CD 21929-2    Sustainability in building construction - Sustainability indicators — Part 2: Framework for the
                  development of indicators for civil engineering works

TC 61             Plastics

ISO/CD 1872-1     Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and
                  basis for specifications

TC 69             Applications of statistical methods

ISO/DTR 13519     Guidance on the development and use of ISO statistical publications supported by software

TC 92             Fire safety

ISO/CD 29903      Guidance for the comparison of toxic gas data from different tests

ISO/DTR 10796-2   Fire safety engineering — Part 2: Example on the application of IS 16730 to the assessment,
                  verification and validation of a CFD model

ISO/DTR 10796-3   Fire safety engineering — Part 3: Example on the application of IS 16730 to the assessment,
                  verification and validation of a structural model
ISO/DTR 10796-4           Fire safety engineering — Part 4: Example on the application of IS 16730 to the assessment,
                          verification and validation of an egress model

TC 107                    Metallic and other inorganic coatings

ISO/DTR 15922             Metallic and other inorganic coatings — Evaluation of properties of dark stain phenomenon of
                          chromated coiled or sheet steel products

TC 108                    Mechanical vibration, shock and condition monitoring

ISO/CD 20958-1            Condition monitoring and diagnostics of machines — Electrical signature analysis — Part 1: Three-
                          phase induction motors

TC 113                    Hydrometry

ISO/CD 4359               Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes

TC 121                    Anaesthetic and respiratory equipment

ISO 27427:2010/CD Amd 1   Anaesthetic and respiratory equipment — Nebulizing systems and components — Amendment 1

IEC/CD 60601-1-8          Medical electrical equipment — Part 1-8: General requirements for basic safety and essential
                          performance — Collateral standard: General requirements, tests and guidance for alarm systems in
                          medical electrical equipment and medical electrical systems

TC 131                    Fluid power systems

ISO/CD 19973-1            Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures

ISO/CD 19973-2            Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control
                          valves

ISO/CD 19973-3            Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with
                          piston rod

ISO/CD 19973-4            Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators

ISO/CD 19973-5            Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves,
                          shuttle valves, dual pressure valves, one-way adjustable flow control valves, quick-exhaust valves

TC 135                    Non-destructive testing

ISO/DTS 11774             Non-destructive testing — Performance based qualification

TC 138                    Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 12230              Polybutene (PB) pipes — Effect of time and temperature on the expected strength

TC 150                    Implants for surgery

ISO/DTS 10974             Requirements for the safety and compatibility of magnetic resonance imaging for patients with an
                          active implantable medical device

TC 156                    Corrosion of metals and alloys

ISO/CD 7539-10            Corrosion of metals and alloys — Stress corrosion cracking — Part 10: Testing of alloys using reverse
                          U-bend test method

ISO/CD 16203              Corrosion of metals and alloys — Guidelines for selection of methods for erosion-corrosion testing in
                          flowing liquids

TC 165                    Timber structures

ISO/PWI 12122             Timber Structures — Timber — Evaluation of characteristic values for structural timber

TC 172                    Optics and photonics
ISO 10110-12:2007/CD   Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric
Amd 1                  surfaces — Amendment 1

ISO/CD 8598-2          Optics and optical instruments — Focimeters — Part 2: Test lenses and methods for calibration and
                       verification of focimeters

ISO/CD 11979-2         Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods

ISO/CD 11979-7         Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations

TC 184                 Automation systems and integration

ISO/CD 20140-1         Automation systems and integration — Environmental and energy efficiency evaluation method for
                       manufacturing systems — Part 1: Overview and general principles

TC 201                 Surface chemical analysis

ISO/CD 16413           Evaluation of thickness, density and interface width of thin films by X-Ray reflectometry — Instrumental
                       requirements, alignment and positioning, data collection, analysis and reporting

TC 204                 Intelligent transport systems

ISO/DTS 18234-1        Intelligent transport systems — Traffic and travel information via transport protocol expert group
                       (TPEG) data-streams — Part 1: Introduction, numbering and versions

ISO/DTS 18234-3        Intelligent transport systems — Traffic and travel information via transport protocol expert group
                       (TPEG) data-streams — Part 3: Service and Network Information (TPEG-SNI)

ISO/DTS 18234-7        Intelligent transport systems — Traffic and travel information via transport protocol expert group
                       (TPEG) data-streams — Part 7: Parking Information (TPEG-PKI)

ISO/DTS 18234-9        Intelligent transport systems — Traffic and travel information via transport protocol expert group
                       (TPEG) data-streams — Part 9: Traffic Event Compact (TPEG-TEC)

ISO/DTS 18234-10       Intelligent transport systems — Traffic and travel information via transport protocol expert group
                       (TPEG) data-streams — Part 10: Conditional access information (TPEG-CAI)

ISO/DTS 21219-2        Intelligent transport systems - Traffic and travel information via transport protocol expert group,
                       generation 2(TPEG2) — Part 2: UML modelling rules

ISO/DTS 21219-3        Intelligent transport systems - Traffic and travel information via transport protocol expert group,
                       generation 2(TPEG2) — Part 3: UML to binary conversion rules

ISO/DTS 21219-5        Intelligent transport systems - Traffic and travel information via transport protocol expert group,
                       generation 2(TPEG2) — Part 5: Service framework (TPEG2-SWF)

ISO/DTS 21219-6        Intelligent transport systems - Traffic and travel information via transport protocol expert group,
                       generation 2(TPEG2) — Part 6: Message management container (TPEG2-MMC)

ISO/DTS 21219-18       Intelligent transport systems - Traffic and Travel Information (TTI) via Transport Protocol Expert Group,
                       Generation 2(TPEG2) — Part 18: Traffic Flow and Prediction application (TPEG2-TFP)

TC 215                 Health informatics

ISO/CD 18104           Health informatics — Integration of a reference terminology model for nursing

TC 227                 Springs

ISO/CD 16249           Springs — Symbols

TC 228                 Tourism and related services

ISO/CD 14785           Tourist information offices — Requirements for tourist information and reception services

TC 229                 Nanotechnologies

ISO/DTS 13278          Carbon nanotubes — Determination of metal impurities in carbon nanotubes (CNTs) using inductively
                       coupled plasma-mass spectroscopy (ICP-MS)

TMB                    Technical Management Board
ISO/IEC CD 80079-38            Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in
                               underground mines

JTC 1                          Information technology

ISO/IEC CD 11693-1             Identification cards — Optical memory cards — Part 1: General characteristics

ISO/IEC CD 11694-1             Identification cards — Optical memory cards — Linear recording method — Part 1: Physical
                               characteristics

ISO/IEC CD 11694-2             Identification cards — Optical memory cards — Linear recording method — Part 2: Dimensions and
                               location of the accessible optical area

ISO/IEC 10918-                 Information technology — Digital compression and coding of continuous-tone still images: Registration
4:1999/PDAM 1                  of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF
                               compression types and Registration Authorities (REGAUT) — Part 4: — Amendment 1: Application
                               specific marker list

ISO/IEC 15444-                 Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 4:
2:2004/PDAM 4                  Block coder extension

ISO/IEC 19794-1/PDAM 2         Information technology — Biometric data interchange formats — Part 1: Framework — Amendment 2:
                               Conformance testing methodologies

ISO/IEC 19794-2.3/PDAM         Information technology — Biometric data interchange formats — Part 2: Finger minutiae data —
1                              Amendment 1: Conformance testing methodology

ISO/IEC 19794-4.3/PDAM         Information technology — Biometric data interchange formats — Part 4: Finger image data —
1                              Amendment 1: Conformance testing methodologies

ISO/IEC CD 19794-7             Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data

ISO/IEC 19794-9/PDAM 1         Information technology — Biometric data interchange formats — Part 9: Vascular image data —
                               Amendment 1: Conformance testing methodology

ISO/IEC 19794-11/PDAM 1        Information technology — Biometric data interchange formats — Part 11: Signature/sign processed
                               dynamic data — Amendment 1: Conformance testing methodologies




DIS circulated

Period from 01 February to 28 February 2011

These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only




                                                                                                                                Vote
                                                                                                                          terminates


TC 2                  Fasteners
ISO/DIS 888     *   Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts
                                                                                                                   2011-07-03


                    (Revision of ISO 888:1976)

TC 5                Ferrous metal pipes and metallic fittings

ISO/DIS 10380   *   Pipework — Corrugated metal hoses and hose assemblies
                                                                                                                   2011-07-18


                    (Revision of ISO 10380:2003)

TC 6                Paper, board and pulps

ISO/DIS         *   Tissue paper and tissue products — Part 7: Determination of optical properties --Measurement
12625-7             of brightness and colour                                                                       2011-07-11


                    (Revision of ISO 12625-7:2007)

TC 8                Ships and marine technology

ISO/DIS 19292   *   Ships and marine technology — Point-type resettable flame detectors for ships
                                                                                                                   2011-07-25


TC 17               Steel

ISO/DIS 15179   *   Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
                                                                                                                   2011-07-17


TC 20               Aircraft and space vehicles

ISO/DIS 17107   *   Space data and information transfer systems — XML specification for navigation data
                    messages                                                                                       2011-07-09


ISO/DIS 22671   *   Space data and information transfer systems — Space link extension (SLE) — Forward
                    communications link transmission unit (CLTU) service                                           2011-07-02


                    (Revision of ISO 22671:2007)

ISO/DIS 22672   *   Space data and information transfer systems — Space link extension (SLE) — Forward space
                    packet service specification                                                                   2011-07-02


                    (Revision of ISO 22672:2006)

TC 22               Road vehicles

ISO/DIS             Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model
13209-2             specification and requirements                                                                 2011-07-26


ISO/DIS         *   Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
14229-1                                                                                                            2011-07-09


                    (Revision of ISO 14229-1:2006)

ISO/DIS         *   Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services
14229-2                                                                                                            2011-07-02


ISO/DIS         *   Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified diagnostic services on
14229-4             FlexRay implementation (UDSonFR)                                                               2011-07-02
ISO/DIS 13296   *   Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and
                    dimensions                                                                                         2011-07-25


                    (Revision of ISO 13296:2005)

TC 23               Tractors and machinery for agriculture and forestry

ISO 3767-       *   Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
1:1998/DAmd         Symbols for operator controls and other displays — Part 1: Common symbols — Amendment 2:           2011-07-08
2                   Additional symbols concerning mainly the engine emissions system

ISO/DIS         *   Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification
15886-1                                                                                                                2011-07-12


                    (Revision of ISO 15886-1:2004)

TC 34               Food products

ISO/DIS 16297       Milk — Bacterial count — Protocol for the evaluation of alternative methods
                                                                                                                       2011-07-17


TC 35               Paints and varnishes

ISO/DIS 15091       Paints and varnishes — Determination of the electrical conductivity and the specific electrical
                    resistivity                                                                                        2011-07-18


TC 37               Terminology and other language and content resources

ISO/DIS         *   Terminological entries in standards — Part 2: Adoption of standardized terminological entries
10241-2.2                                                                                                              2011-04-12


TC 38               Textiles

ISO             *   Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under
11092:1993/D        steady-state conditions (sweating guarded-hotplate test) — Amendment 1                             2011-07-11
Amd 1

TC 45               Rubber and rubber products

ISO/DIS 13507   *   Rubber compounds — Short names for properties reported in certificates of analysis
                                                                                                                       2011-07-10


ISO/DIS 2951    *   Vulcanized rubber — Determination of insulation resistance
                                                                                                                       2011-07-05


                    (Revision of ISO 2951:1974)

ISO/DIS 3384-   *   Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression —
2                   Part 2: With temperature cycling                                                                   2011-07-05


ISO 9924-       *   Rubber and rubber products — Determination of the composition of vulcanizates and uncured
2:2000/DAmd         compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers —            2011-07-02
1                   Amendment 1

ISO/DIS 13145   *   Rubber — Determination of viscosity and stress relaxation using a rotorless, sealed oscillating-
                    shear rheometer                                                                                    2011-07-15


ISO/DIS 4652    *   Rubber compounding ingredients — Carbon black — Determination of specific surface area by
                   nitrogen adsorption methods — Single-point procedures                                          2011-07-05


                   (Revision of ISO 4652-1:1994)

TC 58              Gas cylinders

ISO/DIS        *   Gas cylinders — Identification and marking using radio frequency identification technology —
21007-2            Part 2: Numbering schemes for radio frequency identification                                   2011-07-04


                   (Revision of ISO 21007-2:2005)

TC 61              Plastics

ISO/DIS 9352       Plastics — Determination of resistance to wear by abrasive wheels
                                                                                                                  2011-07-29


                   (Revision of ISO 9352:1995)

ISO/DIS 9772   *   Cellular plastics — Determination of horizontal burning characteristics of small specimens
                   subjected to a small flame                                                                     2011-07-05


                   (Revision of ISO 9772:2001, ISO 9772:2001/Amd 1:2003)

ISO 1628-      *   Plastics — Determination of the viscosity of polymers in dilute solution using capillary
1:2009/DAmd        viscometers — Part 1: General principles — Amendment 1                                         2011-07-11
1

TC 68              Financial services

ISO/DIS        *   Financial services — Key management (retail) — Part 2: Symmetric ciphers, their key
11568-2            management and life cycle                                                                      2011-07-10


                   (Revision of ISO 11568-2:2005)

TC 79              Light metals and their alloys

ISO/DIS 8287   *   Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition
                                                                                                                  2011-07-08


                   (Revision of ISO 8287:2000)

TC 85              Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS        *   Reference radiation fields for radiation protection — Definitions and fundamental concepts
29661.2                                                                                                           2011-04-19


TC 111             Round steel link chains, chain slings, components and accessories

ISO/DIS 7597   *   Forged steel lifting hooks with point and eye for use with grade 8 chain
                                                                                                                  2011-07-05


                   (Revision of ISO 7597:1987)

TC 123             Plain bearings

ISO/DIS 4381   *   Plain bearings — Tin casting alloys for multilayer plain bearings
                                                                                                                  2011-07-08


                   (Revision of ISO 4381:2000)

TC 126             Tobacco and tobacco products
ISO/DIS 20193   *   Tobacco and tobacco products — Determination of the width of the strands of cut tobacco
                                                                                                                            2011-07-29


TC 127              Earth-moving machinery

ISO/DIS 10987       Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting
                                                                                                                            2011-07-05


TC 131              Fluid power systems

ISO/DIS         *   Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods
10770-2             for three-way directional flow control valves                                                           2011-07-29


                    (Revision of ISO 10770-2:1998)

TC 135              Non-destructive testing

ISO/DIS 9712    *   Non-destructive testing — Qualification and certification of NDT personnel — General principles
                                                                                                                            2011-07-18


                    (Revision of ISO 9712:2005, ISO 9712:2005/Cor 1:2006)

TC 142              Cleaning equipment for air and other gases

ISO/DIS 29462   *   Field testing of general ventilation filtration devices and systems for in situ removal efficiency by
                    particle size and resistance to airflow                                                                 2011-07-18


TC 150              Implants for surgery

ISO/DIS 6474-   *   Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high purity
2.2                 alumina matrix with zirconia reinforcement                                                              2011-04-17


ISO/DIS 5840-   *   Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes
3                   implanted by minimally invasive techniques                                                              2011-07-25


ISO             *   Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) —
7199:2009/DA        Amendment 1: Clarifications for test methodologies, labelling, and sampling schedule                    2011-07-17
md 1

ISO/DIS 11658   *   Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface
                    modifications for extracorporeal perfusion systems                                                      2011-07-17


TC 156              Corrosion of metals and alloys

ISO/DIS 14802   *   Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
                                                                                                                            2011-07-05


TC 163              Thermal performance and energy use in the built environment

ISO/DIS 14857   *   Thermal performance in the built environment — Determination of air permeance of building
                    materials                                                                                               2011-07-23


TC 164              Mechanical testing of metals

ISO/DIS 4965-   *   Metallic materials — Fatigue testing — Uniaxial dynamic force calibration — Part 1: Testing
1                   systems                                                                                                 2011-07-03


                    (Revision of ISO 4965:1979)
ISO/DIS 4965-   *   Metallic materials — Fatigue testing — Uniaxial dynamic force calibration — Part 2: Dynamic
2                   calibration device (DCD) instrumentation                                                          2011-07-03


                    (Revision of ISO 4965:1979)

ISO/DIS 12107   *   Metallic materials — Fatigue testing — Statistical planning and analysis of data
                                                                                                                      2011-07-09


                    (Revision of ISO 12107:2003)

TC 172              Optics and photonics

ISO/DIS             Optics and optical instruments — Laboratory procedures for testing surveying and construction
16331-1             instruments — Part 1: Performance of handheld laser distance meters                               2011-07-22


TC 173              Assistive products for persons with disability

ISO/DIS 7176-   *   Wheelchairs — Part 11: Test dummies
11                                                                                                                    2011-07-10


                    (Revision of ISO 7176-11:1992)

ISO/DIS 7176-   *   Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test
16                  methods                                                                                           2011-07-10


                    (Revision of ISO 7176-16:1997)

TC 176              Quality management and quality assurance

ISO/DIS 10004   *   Quality management — Customer satisfaction — Guidelines for monitoring and measuring
                                                                                                                      2011-07-29


                    (Revision of ISO/TS 10004:2010)

TC 190              Soil quality

ISO/DIS 13196   *   Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence
                    spectrometry using a handheld or portable instrument                                              2011-07-11


TC 198              Sterilization of health care products

ISO/DIS         *   Aseptic processing of health care products — Part 7: Alternative processes for atypical medical
13408-7             devices and combination products                                                                  2011-07-26


TC 205              Building environment design

ISO/DIS         *   Building environment design — Standards for the design, construction and operation of radiant
11855-5             heating and cooling systems — Part 5: Installation                                                2011-07-10


TC 211              Geographic information/Geomatics

ISO/DIS 19155       Geographic information — Place Identifier (PI) architecture
                                                                                                                      2011-07-29


TC 227              Springs

ISO/DIS         *   Hot formed helical compression springs — Technical specifications
11891.2                                                                                                               2011-04-18
JTC 1              Information technology

ISO/IEC DIS        Information technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second
40210              Edition)                                                                                        2011-07-26


ISO/IEC DIS        Information technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
40220                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C SOAP Message Transmission Optimization Mechanism
40230                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C Web Services Addressing 1.0 — Core
40240                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C Web Services Addressing 1.0 — SOAP Binding
40250                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C Web Services Addressing 1.0 — Metadata
40260                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C Web Services Policy 1.5 — Framework
40270                                                                                                              2011-07-26


ISO/IEC DIS        Information technology — W3C Web Services Policy 1.5 — Attachment
40280                                                                                                              2011-07-26


ISO/IEC DIS    *   Information technology — Common Language Infrastructure (CLI)
23271                                                                                                              2011-07-03


                   (Revision of ISO/IEC 23271:2006)

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 4: Conformance testing —
14496-             Amendment 40: ExtendedCore2D conformance                                                        2011-07-16
4:2004/DAmd
40

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 5: Reference software —
14496-             Amendment 29: Reference software for LASeR presentation and modification of structured          2011-07-19
5:2001/DAmd        information (PMSI) tools
29

ISO/IEC            Information technology — Coding of audio-visual objects — Part 5: Reference software —
14496-             Amendment 30: ExtendedCore2D reference software                                                 2011-07-16
5:2001/DAmd
30

ISO/IEC            Information technology — Coding of audio-visual objects — Part 12: ISO base media file format
14496-             — Amendment 3: DASH support and RTP reception hint track processing                             2011-07-16
12:2008/DAmd
3

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 15: Advanced Video Coding
14496-             (AVC) file format — Amendment 1: Sub-track definitions                                          2011-07-16
15:2010/DAmd
1

ISO/IEC            Information technology — JPEG 2000 image coding system — Part 12: ISO base media file
15444-             format — Amendment 3: DASH support and RTP reception hint track processing                      2011-07-16
12:2008/DAmd
3
ISO/IEC               Information technology — Multimedia framework (MPEG-21) — Part 8: Reference software —
21000-                Amendment 2: Reference software for media value chain ontology (MVCO)                                2011-07-16
8:2008/DAmd
2

ISO/IEC               Information technology — Multimedia application format (MPEG-A) — Part 11: Stereoscopic
23000-                video application format — Amendment 2: Signalling of additional composition type and profiles       2011-07-16
11:2009/DAmd
2

ISO/IEC DIS           Information technology — MPEG systems technologies — Part 6: Dynamic adaptive streaming
23001-6               over HTTP (DASH)                                                                                     2011-07-16


ISO/IEC DIS           Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding
23003-3                                                                                                                    2011-07-16


ISO/IEC               Information technology — Rich media user interfaces — Part 1: Widgets — Amendment 1:
23007-                Widget extensions                                                                                    2011-07-16
1:2010/DAmd
1

ISO/IEC DIS           Information technology — Open Virtualization Format (OVF) specification
17203                                                                                                                      2011-07-29




FDIS circulated

Period from 01 February to 28 February 2011

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only



                                                                                                                       Vote terminates


TC 5                  Ferrous metal pipes and metallic fittings

ISO/FDIS 7186     *   Ductile iron products for sewerage applications
                                                                                                                           2011-04-22


                      (Revision of ISO 7186:1996)

TC 8                  Ships and marine technology

ISO/FDIS          *   Ships and marine technology — Breathing apparatus for ships — Part 3: Self-contained
23269-3               breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes                         2011-04-08


TC 20                 Aircraft and space vehicles

ISO/FDIS          *   Space systems — Space debris mitigation requirements
24113                                                                                                                      2011-04-18
                    (Revision of ISO 24113:2010)

TC 22               Road vehicles

ISO             *   Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1
11838:1997/F                                                                                                    2011-04-15
DAmd 1

ISO             *   Moped and moped-rider kinematics — Vocabulary — Amendment 1
14722:1998/F                                                                                                    2011-04-15
DAmd 1

TC 29               Small tools

ISO/FDIS 3860   *   Bore cutters with key drive — Form milling cutters with constant profile
                                                                                                                2011-04-17


                    (Revision of ISO 3860:1976)

ISO/FDIS 6462   *   Face and shoulder milling cutters with indexable inserts — Dimensions
                                                                                                                2011-04-12


                    (Revision of ISO 6462:1983)

TC 30               Measurement of fluid flow in closed conduits

ISO/FDIS        *   Input/output protocols and electronic interfaces for water meters — Requirements
22158                                                                                                           2011-04-25


TC 34               Food products

ISO/FDIS        *   Green tea — Definition and basic requirements
11287                                                                                                           2011-04-08


TC 37               Terminology and other language and content resources

ISO/FDIS        *   Language resource management — Persistent identification and sustainable access (PISA)
24619                                                                                                           2011-04-17


TC 51               Pallets for unit load method of materials handling

ISO/FDIS        *   Pallets for materials handling — Flat pallets — Part 1: Test methods
8611-1                                                                                                          2011-04-12


                    (Revision of ISO 8611-1:2004)

ISO/FDIS        *   Pallets for materials handling — Flat pallets — Part 2: Performance requirements and
8611-2              selection of tests                                                                          2011-04-12


                    (Revision of ISO/TS 8611-2:2005)

ISO/FDIS        *   Pallets for materials handling — Flat pallets — Part 3: Maximum working loads
8611-3                                                                                                          2011-04-12


                    (Revision of ISO/TS 8611-3:2005)

TC 61               Plastics

ISO/FDIS        *   Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature
11357-3             and enthalpy of melting and crystallization                                                 2011-04-08


                    (Revision of ISO 11357-3:1999, ISO 11357-3:1999/Amd 1:2005)

TC 67               Materials, equipment and offshore structures for petroleum, petrochemical
                    and natural gas industries

ISO/FDIS        *   Petroleum and natural gas industries — Drilling fluids — Processing equipment evaluation
13501                                                                                                                2011-04-25


                    (Revision of ISO 13501:2005)

TC 83               Sports and recreational equipment

ISO/FDIS 7794   *   Cross-country skis — Ski-binding screws — Requirements
                                                                                                                     2011-04-16


                    (Revision of ISO 7794:1991)

ISO/FDIS        *   Cross-country skis — Binding mounting area — Requirements for test screws
10228                                                                                                                2011-04-16


                    (Revision of ISO 10228:1991)

TC 85               Nuclear energy, nuclear technologies, and radiological protection

ISO/FDIS        *   Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 2: Characterization of
20785-2             instrument response                                                                              2011-04-05


TC 89               Wood-based panels

ISO 12460-      *   Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method
4:2008/FDAmd        — Amendment 1                                                                                    2011-04-16
1

TC 120              Leather

ISO/FDIS        *   Leather — Upholstery leather characteristics — Selection of leather for furniture
16131                                                                                                                2011-04-08


TC 130              Graphic technology

ISO/FDIS        *   Graphic technology — Input data for characterization of four-colour process printing — Part 1:
12642-1             Initial data set                                                                                 2011-04-22


                    (Revision of ISO 12642-1:1996, ISO 12642-1:1996/Cor 1:2005)

TC 135              Non-destructive testing

ISO/FDIS        *   Non-destructive testing — Infrared thermography — Vocabulary
10878                                                                                                                2011-04-10


TC 138              Plastics pipes, fittings and valves for the transport of fluids

ISO/FDIS        *   Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and
21307               fittings used in the construction of gas and water distribution systems                          2011-04-17


                    (Revision of ISO 21307:2009)

ISO/FDIS        *   Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or
25780               sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated            2011-04-18
                    polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking
                    techniques

TC 145              Graphical symbols

ISO/FDIS 7010   *   Graphical symbols — Safety colours and safety signs — Registered safety signs
                                                                                                                     2011-04-12
                    (Revision of ISO 7010:2003, ISO 7010:2003/Amd 1:2006, ISO 7010:2003/FDAmd 50, ISO
                    7010:2003/FDAmd 55, ISO 7010:2003/FDAmd 56, ISO 7010:2003/FDAmd 57, ISO
                    7010:2003/FDAmd 59, ISO 7010:2003/FDAmd 60, ISO 7010:2003/Amd 2:2007, ISO
                    7010:2003/Amd 3:2007, ISO 7010:2003/FDAmd 61, ISO 7010:2003/DAmd 75, ISO
                    7010:2003/DAmd 76, ISO 7010:2003/Amd 4:2009, ISO 7010:2003/Amd 5:2010, ISO
                    7010:2003/Amd 6:2010)

TC 146              Air quality

ISO/FDIS        *   Air quality — Test method for filtration characterization of cleanable filter media
11057                                                                                                             2011-04-24


TC 150              Implants for surgery

ISO/FDIS        *   Guidance for the preparation and quality management of fluids for haemodialysis and related
23500               therapies                                                                                     2011-04-10


TC 157              Non-systemic contraceptives and STI barrier prophylactics

ISO/FDIS 7439   *   Copper-bearing contraceptive intrauterine devices — Requirements and tests
                                                                                                                  2011-05-11


                    (Revision of ISO 7439:2002)

TC 172              Optics and photonics

ISO 11979-      *   Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements —
8:2006/FDAmd        Amendment 1                                                                                   2011-04-18
1

TC 190              Soil quality

ISO/FDIS        *   Soil quality — Determination of selected coal-tar-derived phenolic compounds using high
11709               performance liquid chromatography (HPLC)                                                      2011-04-17


TC 206              Fine ceramics

ISO/FDIS        *   Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for
13124               interfacial bond strength of ceramic materials                                                2011-04-12


TC 213              Dimensional and geometrical product specifications and verification

ISO/FDIS 5459   *   Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum
                    systems                                                                                       2011-04-18


                    (Revision of ISO 5459:1981, ISO/DIS 5459-1, ISO/DIS 5459-2)

ISO/FDIS        *   Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
8015.2                                                                                                            2011-04-18


                    (Revision of ISO 8015:1985, ISO/DIS 14659.2)

ISO/FDIS        *   Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters:
16610-21            Gaussian filters                                                                              2011-04-02


                    (Revision of ISO 11562:1996)

IULTCS              International Union of Leather Technologists and Chemists Societies

ISO/FDIS        *   Leather — Chemical determination of formaldehyde content — Part 3: Determination of
17226-3             formaldehyde emissions from leather                                                           2011-04-11
JTC 1               Information technology

ISO/IEC FDIS    *   Information technology — Open systems interconnection — Part 1: Object identifier resolution
29168-1             system (ORS)                                                                                   2011-04-15


ISO/IEC FDIS    *   Identification cards — Card service life — Part 2: Methods of evaluation
24789-2                                                                                                            2011-04-23


ISO/IEC FDIS    *   Information technology — 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side)
12862               DVD recordable disk for dual layer (DVD-R for DL)                                              2011-04-29


                    (Revision of ISO/IEC 12862:2009)

ISO/IEC FDIS    *   Information technology — Security techniques — Information security risk management
27005                                                                                                              2011-04-22


                    (Revision of ISO/IEC 27005:2008)

ISO/IEC FDIS    *   Information technology — Digital compression and coding of continuous-tone still images:
10918-5             JPEG File Interchange Format (JFIF) — Part 5:                                                  2011-04-03


ISO/IEC         *   Information technology — Coding of audio-visual objects — Part 5: Reference software —
14496-              Amendment 28: Reference software for LASeR adaptation tools                                    2011-04-03
5:2001/FDAmd
28

ISO/IEC         *   Information technology — JPEG 2000 image coding system: Core coding system — Part 1:
15444-              — Amendment 4: Guidelines for digital cinema applications                                      2011-04-03
1:2004/FDAmd
4

ISO/IEC FDIS    *   Information technology — Media context and control — Part 6: Common types and tools
23005-6                                                                                                            2011-04-03


ISO/IEC FDIS    *   Information technology — User interface icons — Part 40: Management of icon registration
11581-40                                                                                                           2011-04-23


ISO/IEC FDIS    *   Information technology — Interoperability with assistive technology (AT) — Part 1:
13066-1             Requirements and recommendations for interoperability                                          2011-04-23


ISO/IEC FDIS    *   Information technology — User interfaces — Procedures for the registration of cultural
15897               elements                                                                                       2011-04-23


                    (Revision of ISO/IEC 15897:1999)

ISO/IEC FDIS    *   Information technology — Learning, education and training — Metadata for learning resources
19788-2             — Part 2: Dublin Core elements                                                                 2011-04-23




Standards published

New International Standards published between 01 February and 28 February 2011
* Available in English only

** French version of standard previously published in English only



                                                                                                                      Price group


TC 2                  Fasteners

ISO                   Hexalobular socket pan head tapping screws
14585:2011                                                                                                                     B


ISO                   Hexalobular socket countersunk head tapping screws
14586:2011                                                                                                                     B


ISO                   Hexalobular socket raised countersunk (oval) head tapping screws
14587:2011                                                                                                                     B


TC 4                  Rolling bearings

ISO                   Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and
9628:2006/Am          tolerances — Amendment 1: Diameter series 3                                                             XZ
d 1:2011

TC 6                  Paper, board and pulps

ISO 7263:2011         Corrugating medium — Determination of the flat crush resistance after laboratory fluting
                                                                                                                               D


TC 8                  Ships and marine technology

ISO 28005-        *   Security management systems for the supply chain — Electronic port clearance (EPC) — Part
2:2011                2: Core data elements                                                                                    X


TC 10                 Technical product documentation

ISO 14145-            Roller ball pens and refills — Part 1: General use — Amendment 1: Ball diameter for tip
1:1998/Amd            classification                                                                                          XZ
1:2011

TC 17                 Steel

ISO 5952:2011     *   Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion
                      resistance                                                                                               F


TC 20                 Aircraft and space vehicles

ISO               *   Aircraft ground equipment — Upper deck catering vehicle — Functional requirements
27470:2011                                                                                                                     D


ISO               *   Space projects — Programme management — Dependability assurance requirements
23460:2011                                                                                                                     J


ISO               *   Space systems — Programme management — Breakdown of project management structures
27026:2011                                                                                                                     F


TC 22                 Road vehicles
ISO 15765-      *   Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4:
4:2011              Requirements for emissions-related systems                                                        N


ISO             *   Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test
14793:2011          methods                                                                                           N


ISO             *   Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods
14794:2011                                                                                                             L


ISO             *   Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test
16333:2011          method                                                                                            H


ISO 17288-      *   Passenger cars — Free-steer behaviour — Part 1: Steering-release open-loop test method
1:2011                                                                                                                D


ISO 17288-      *   Passenger cars — Free-steer behaviour — Part 2: Steering-pulse open-loop test method
2:2011                                                                                                                G


TC 23               Tractors and machinery for agriculture and forestry

ISO                 Forestry and gardening machinery — Noise test code for portable hand-held machines with
22868:2011          internal combustion engine — Engineering method (Grade 2 accuracy)                                Q


TC 28               Petroleum products and lubricants

ISO 20783-          Petroleum and related products — Determination of emulsion stability of fire-resistant fluids —
1:2011              Part 1: Fluids in category HFAE                                                                   D


TC 34               Food products

ISO 7301:2011       Rice — Specification
                                                                                                                      K


ISO 12966-      *   Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part
2:2011              2: Preparation of methyl esters of fatty acids                                                    H


ISO             *   Animal and vegetable fats and oils — Determination of peroxide value — Potentiometric end-
27107:2008          point determination                                                                               E


ISO                 Green coffee — Determination of water content — Basic reference method — Amendment 1
1446:2001/Am                                                                                                          XZ
d 1:2011

ISO 8455:2011   *   Green coffee — Guidelines for storage and transport
                                                                                                                      C


TC 35               Paints and varnishes

ISO 2811-           Paints and varnishes — Determination of density — Part 1: Pyknometer method
1:2011                                                                                                                E


ISO 2811-           Paints and varnishes — Determination of density — Part 2: Immersed body (plummet)
2:2011              method                                                                                            E


ISO 2811-           Paints and varnishes — Determination of density — Part 3: Oscillation method
3:2011                                                                                                                D
ISO 2811-           Paints and varnishes — Determination of density — Part 4: Pressure cup method
4:2011                                                                                                              D


TC 39               Machine tools

ISO             *   Production equipment for microsystems — Interface between end effector and handling
29262:2011          system                                                                                          J


TC 45               Rubber and rubber products

ISO 4660:2011       Rubber, raw natural — Colour index test
                                                                                                                    C


ISO 4635:2011   *   Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of
                    highways — Specification                                                                        F


TC 61               Plastics

ISO 10350-          Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-
2:2011              reinforced plastics                                                                             E


ISO 8516:2011       Textile glass — Textured yarns — Basis for a specification
                                                                                                                    B


TC 68               Financial services

ISO 9564-       *   Financial services — Personal Identification Number (PIN) management and security — Part
1:2011              1: Basic principles and requirements for PINs in card-based systems                             N


TC 79               Light metals and their alloys

ISO 2106:2011       Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density)
                    of anodic oxidation coatings — Gravimetric method                                               C


ISO 8994:2011       Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion
                    — Grid method                                                                                   B


TC 92               Fire safety

ISO 26367-          Guidelines for assessing the adverse environmental impact of fire effluents — Part 1: General
1:2011                                                                                                              J


TC 94               Personal safety -- Protective clothing and equipment

ISO             *   Wildland firefighting personal protective equipment — Requirements and test methods
16073:2011                                                                                                          W


TC 106              Dentistry

ISO 3107:2011       Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements
                                                                                                                    E


ISO                 Dentistry — Brackets and tubes for use in orthodontics
27020:2010                                                                                                          F


TC 119              Powder metallurgy
ISO 3953:2011       Metallic powders — Determination of tap density
                                                                                                                     B


TC 121              Anaesthetic and respiratory equipment

ISO 81060-      *   Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement
2:2009/Cor          type — Technical Corrigendum 1                                                                 free
1:2011

TC 138              Plastics pipes, fittings and valves for the transport of fluids

ISO 11296-          Plastics piping systems for renovation of underground non-pressure drainage and sewerage
3:2009              networks — Part 3: Lining with close-fit pipes                                                   K


ISO 12176-          Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3:
3:2011              Operator's badge                                                                                 D


ISO             *   Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced
10639:2004/A        thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin —                XZ
md 1:2011           Amendment 1

TC 145              Graphical symbols

ISO 3864-           Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product
2:2004/Amd          safety labels — Amendment 1: Revision of Table B.1                                              XZ
1:2011

TC 147              Water quality

ISO 5667-           Water quality — Sampling — Part 23: Guidance on passive sampling in surface waters
23:2011                                                                                                              L


TC 150              Implants for surgery

ISO             *   Wear of implant materials — Polymer and metal wear particles — Isolation and
17853:2011          characterization                                                                                 H


ISO 18192-      *   Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading
1:2011              and displacement parameters for wear testing and corresponding environmental conditions for      M
                    test

TC 157              Non-systemic contraceptives and STI barrier prophylactics

ISO                 Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1
16037:2002/A                                                                                                        XZ
md 1:2011

ISO             *   Male condoms — Requirements and test methods for condoms made from synthetic materials
23409:2011                                                                                                           S


TC 164              Mechanical testing of metals

ISO 6892-           Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
2:2011                                                                                                               K


TC 172              Optics and photonics

ISO 8624:2011       Ophthalmic optics — Spectacle frames — Measuring system and terminology
                                                                                                                     E
TC 184             Automation systems and integration

ISO 10303-     *   Industrial automation systems and integration — Product data representation and exchange
52:2011            — Part 52: Integrated generic resource: Mesh-based topology                                   W


TC 211             Geographic information/Geomatics

ISO                Geographic information — Filter encoding
19143:2010                                                                                                        X


TC 215             Health informatics

ISO 12967-         Health informatics — Service architecture — Part 1: Enterprise viewpoint
1:2009                                                                                                           U


ISO 12967-         Health informatics — Service architecture — Part 2: Information viewpoint
2:2009                                                                                                           U


ISO 12967-         Health informatics — Service architecture — Part 3: Computational viewpoint
3:2009                                                                                                           N


ISO            *   Health informatics — Harmonized data types for information interchange
21090:2011                                                                                                       XD


TC 216             Footwear

ISO                Footwear — Test method for slide fasteners — Slider locking strength
10748:2011                                                                                                       C


JTC 1              Information technology

ISO/IEC        *   Information technology — Mobile multicast communications: Framework — Part 1:
24793-1:2011                                                                                                      L


ISO/IEC        *   Information technology — Mobile multicast communications: Protocol over native IP multicast
24793-2:2011       networks — Part 2:                                                                             K


ISO/IEC        *   Systems and software engineering — Systems and software assurance — Part 2: Assurance
15026-2:2011       case                                                                                           E


ISO/IEC        *   Systems and software engineering — High-level Petri nets — Part 2: Transfer format
15909-2:2011                                                                                                     XA


ISO/IEC        *   Systems and software engineering — Systems and software Quality Requirements and
25040:2011         Evaluation (SQuaRE) — Evaluation process                                                       S


ISO/IEC TR     *   Information technology — Fibre Channel — Part 372: Methodologies of interconnects-2 (FC-
14165-             MI-2)                                                                                          V
372:2011

ISO/IEC        *   Information technology — Security techniques — Encryption algorithms — Part 1: General —
18033-             Amendment 1                                                                                   XZ
1:2005/Amd
1:2011

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 5: Reference software —
14496-             Amendment 27: Scalable complexity 3D mesh coding reference software                           XZ
5:2001/Amd
27:2011

ISO/IEC           *   Information technology — Coding of audio-visual objects — Part 26: Audio conformance —
14496-                Technical Corrigendum 2                                                                     free
26:2010/Cor
2:2011

ISO/IEC           *   Information technology — Multimedia content description interface — Part 12: Query format
15938-                — Amendment 1: Reference software and flat metadata output                                    M
12:2008/Amd
1:2011

ISO/IEC           *   Information technology — Biometric application programming interface — Part 4: Biometric
19784-4:2011          sensor function provider interface                                                            R


ISO/IEC           *   Information technology — Biometric performance testing and reporting — Part 5: Access
19795-5:2011          control scenario and grading scheme                                                           R




Standards confirmed

The following International Standards are confimred for a five year period:



TC 2                                        Fasteners

ISO 887:2000                                (reconfirmed)

ISO 4759-3:2000                             (reconfirmed)

ISO 7089:2000                               (reconfirmed)

ISO 7090:2000                               (reconfirmed)

ISO 7091:2000                               (reconfirmed)

ISO 7092:2000                               (reconfirmed)

ISO 7093-1:2000                             (reconfirmed)

ISO 7094:2000                               (reconfirmed)

ISO 14588:2000                              (reconfirmed)

ISO 15973:2000                              (reconfirmed)

ISO 15974:2000                              (reconfirmed)

TC 24                                       Particle characterization including sieving

ISO 20998-1:2006

TC 27                                       Solid mineral fuels
ISO 15239:2005

TC 29              Small tools

ISO 9138:1993      (reconfirmed)

TC 34              Food products

ISO 5508:1990      (reconfirmed)

ISO 15304:2002

TC 35              Paints and varnishes

ISO 11890-1:2007

TC 38              Textiles

ISO 8498:1990      (reconfirmed)

TC 67              Materials, equipment and offshore structures for petroleum, petrochemical
                   and natural gas industries

ISO 10405:2000     (reconfirmed)

TC 94              Personal safety -- Protective clothing and equipment

ISO 13995:2000

TC 102             Iron ore and direct reduced iron

ISO 10203:2006

ISO 10204:2006

TC 107             Metallic and other inorganic coatings

ISO 3497:2000      (reconfirmed)

ISO 3543:2000      (reconfirmed)

ISO 10111:2000     (reconfirmed)

ISO 10587:2000     (reconfirmed)

TC 122             Packaging

ISO 2233:2000      (reconfirmed)

ISO 2234:2000      (reconfirmed)

ISO 2244:2000      (reconfirmed)

ISO 2247:2000      (reconfirmed)

ISO 2248:1985      (reconfirmed)

ISO 2873:2000      (reconfirmed)

ISO 2875:2000      (reconfirmed)

ISO 2876:1985      (reconfirmed)

ISO 8318:2000      (reconfirmed)

ISO 12048:1994     (reconfirmed)

ISO 23667:2007

TC 146             Air quality
ISO 10396:2007

ISO 16000-9:2006

ISO 16000-10:2006

ISO 16000-11:2006

TC 163                                   Thermal performance and energy use in the built environment

ISO 15927-6:2007

JTC 1                                    Information technology

ISO/IEC 2382-8:1998                      (reconfirmed)

ISO/IEC 2382-14:1997                     (reconfirmed)

ISO/IEC 2382-25:1992                     (reconfirmed)

ISO/IEC 2382-31:1997                     (reconfirmed)

ISO/IEC 10164-4:1992                     (reconfirmed)

ISO/IEC 10164-7:1992                     (reconfirmed)

ISO/IEC 10164-15:2002

ISO/IEC 10164-16:1997                    (reconfirmed)

ISO/IEC 10164-18:1997                    (reconfirmed)

ISO/IEC 10165-4:1992                     (reconfirmed)

ISO/IEC 9318-4:2002

ISO/IEC 9798-4:1999                      (reconfirmed)

ISO/IEC 18032:2005




Standards withdrawn

Period from 01 February to 28 February 2011



TC 8                                     Ships and marine technology

ISO/PAS 28005-2:2009                     (replaced by ISO 28005-2:2011)

TC 22                                    Road vehicles

ISO 1919:1998                            (replaced by )

ISO 2344:1998                            (replaced by )

ISO 2345:1994                            (replaced by )

ISO 2347:1994                            (replaced by )
ISO 2704:1998                                (replaced by )

ISO 2705:2006                                (replaced by )

ISO 8470:2006                                (replaced by )

ISO 14508:2006                               (replaced by )

ISO 16246:2005                               (replaced by )

ISO 19812:2006                               (replaced by )

ISO 22977:2005                               (replaced by )

TC 34                                        Food products

ISO 5509:2000                                (replaced by ISO 12966-2:2011)

TC 45                                        Rubber and rubber products

ISO 18752:2006/Amd 1:2010                    (replaced by )

TC 68                                        Financial services

ISO 9564-3:2003                              (replaced by ISO 9564-1:2011)

TC 87                                        Cork

ISO 2191:1972                                (replaced by )

ISO 9148:1987                                (replaced by )

TC 164                                       Mechanical testing of metals

ISO 783:1999                                 (replaced by ISO 6892-2:2011)




Meeting calendar

(update at 01 February 2011)

Meetings called for the month of January are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional



March 2011

1-3     Atlanta (USA)           JTC 2           Joint Project Committee - Energy efficiency and renewable energy sources - Common
                                                terminology

2       Bangkok                 TC 122          Packaging
        (Thailand)

3       Frankfurt               TC 131/SC 6     Fluid power systems/Contamination control
        (Germany)
3-4     Berlin (Germany)   TC 58/SC 4    Gas cylinders/Operational requirements for gas cylinders

7-8     Berlin (Germany)   TC 1          Screw threads

7-9     Sydney             TC 243        Project Committee: Consumer product safety
        (Australia)

7-11    Sydney             TC 240        Project Committee: Product recall
        (Australia)

11      Paris (France)     TC 22/SC 21   Road vehicles/Electrically propelled road vehicles

17-18   Geneva             COUNCIL       Council
        (Switzerland)

18      Strasbourg         JTC 1/SC 36   Information technology/Information technology for learning, education and training
        (France)

18-19   Tokyo (Japan)      TC 219        Floor coverings

23-24   Ottawa (Canada)    TC 245        Project Committee: Cross-border trade of second-hand goods

24      Milan (Italy)      TC 118/SC 3   Compressors and pneumatic tools, machines and equipment/Pneumatic tools and
                                         machines

24      Milan (Italy)      TC 118/SC 4   Compressors and pneumatic tools, machines and equipment/Compressed air purity
                                         specification and compressed air treatment equipment

24      Milan (Italy)      TC 118/SC 6   Compressors and pneumatic tools, machines and equipment/Air compressors and
                                         compressed air systems

25      Milan (Italy)      TC 118        Compressors and pneumatic tools, machines and equipment

28      Tokyo (Japan)      TC 59/SC 3    Buildings and civil engineering works/Functional/user requirements and performance in
                                         building construction

29      Berlin (Germany)   TC 117        Fans

April 2011

1       Prague (Czech      JTC 1/SC 34   Information technology/Document description and processing languages
        Republic)

2-3     Oostenede          TC 23/SC 3    Tractors and machinery for agriculture and forestry/Safety and comfort
        (Belgium)

3-4     Oostenede          TC 23         Tractors and machinery for agriculture and forestry
        (Belgium)

4       Urbach             TC 161        Control and protective devices for gas and/or oil burners and appliances
        (Germany)

4-5     Madrid (Spain)     TC 34/SC 11   Food products/Animal and vegetable fats and oils

4-7     Berlin (Germany)   TC 127        Earth-moving machinery

6       Madrid (Spain)     TC 34/SC 2    Food products/Oleaginous seeds and fruits and oilseed meals

6       Bratislava         TC 226        Materials for the production of primary aluminium
        (Slovakia)

7       London (United     TC 43/SC 2    Acoustics/Building acoustics
        Kingdom)

7       Paris (France)     TC 92/SC 1    Fire safety/Fire initiation and growth

7       La Plaine St-      TC 92/SC 2    Fire safety/Fire containment
        Denis (France)
7       Paris (France)          TC 92/SC 3    Fire safety/Fire threat to people and environment

7-8     London (United          TC 43/SC 1    Acoustics/Noise
        Kingdom)

8       London (United          TC 43         Acoustics
        Kingdom)

8       Paris (France)          TC 92         Fire safety

8       La Plaine St-           TC 92/SC 4    Fire safety/Fire safety engineering
        Denis (France)

8       Delft                   TC 153/SC 1   Valves/Design, manufacture, marking and testing
        (Netherlands)

10-12   Porto (Portugal)   *    TC 59/SC 14   Buildings and civil engineering works/Design life

11-12   Tokyo (Japan)           TC 210        Quality management and corresponding general aspects for medical devices

11-15   St-Denis           *    JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)
        (France)

11-15   Prague (Czech           TC 204        Intelligent transport systems
        Republic)

11-16   Berlin (Germany)   **   TC 130        Graphic technology

13-14   Dresden                 TC 199        Safety of machinery
        (Germany)

14      Milan (Italy)           TC 8/SC 12    Ships and marine technology/Ships and marine technology - Large yachts

15      Porto (Portugal)        TC 23/SC 7    Tractors and machinery for agriculture and forestry/Equipment for harvesting and
                                              conservation

18-19   Singapore               JTC 1/SC 27   Information technology/IT Security techniques
        (Singapore)

19-20   Berlin (Germany)        TC 22/SC 1    Road vehicles/Ignition equipment

20-21   Astana                  TC 67/SC 6    Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (Kazakhstan)                          gas industries/Processing equipment and systems

26-29   Niagara Falls           TC 85/SC 2    Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
        (Canada)

27-28   Delft                   TC 24/SC 4    Particle characterization including sieving/Particle characterization
        (Netherlands)

May 2011

2-3     Paris (France)          TC 155        Nickel and nickel alloys

2-4     The Hague               TC 249        Traditional chinese medicine
        (Netherlands)

2-6     Sydney                  TC 46         Information and documentation
        (Australia)

3-4     Paris (France)          TC 44/SC 3    Welding and allied processes/Welding consumables

4-5     Geneva                  TC 94         Personal safety -- Protective clothing and equipment
        (Switzerland)

6-13    Geneva                  TC 94/SC 14   Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
        (Switzerland)

9       Amsterdam               TC 68/SC 2    Financial services/Security management and general banking operations
        (Netherlands)

9       Amsterdam           *    TC 68/SC 4    Financial services/Securities and related financial instruments
        (Netherlands)

9       Berlin (Germany)         TC 110/SC 1   Industrial trucks/General terminology

9-13    Berlin (Germany)         TC 114        Horology

9-13    Adelaide                 TC 241        Project Committee: Road-Traffic Safety Management System
        (Australia)

11      Berlin (Germany)         TC 110/SC 4   Industrial trucks/Rough-terrain trucks

11      Porto de                 TC 135/SC 9   Non-destructive testing/Acoustic emission testing
        Galinhas (Brazil)

12      Delft                    TC 68         Financial services
        (Netherlands)

12      Berlin (Germany)         TC 110/SC 2   Industrial trucks/Safety of powered industrial trucks

12-13   Florida (USA)            TC 184/SC 5   Automation systems and integration/Interoperability, integration, and architectures for
                                               enterprise systems and automation applications

12-13   Vienna (Austria)    *    TC 253        Project committee: Treated wastewater re-use for irrigation

13      Franklin Lakes           TC 84         Devices for administration of medicinal products and intravascular catheters
        (USA)

13      Berlin (Germany)         TC 110        Industrial trucks

13      Beijing (China)          TC 195        Building construction machinery and equipment

16-17   Bratislava          *    TC 44/SC 11   Welding and allied processes/Qualification requirements for welding and allied
        (Slovakia)                             processes personnel

16-19   Kobe (Japan)             TC 22/SC 13   Road vehicles/Ergonomics applicable to road vehicles

16-19   Stockholm           **   TC 156        Corrosion of metals and alloys
        (Sweden)

16-20   Kona, Hawaii        *    JTC 1/SC 32   Information technology/Data management and interchange
        (USA)

16-20   Zurich                   TC 39/SC 2    Machine tools/Test conditions for metal cutting machine tools
        (Switzerland)

16-20   Beijing (China)          TC 247        Fraud countermeasures and controls

16-20   Berlin (Germany)         TC 248        Project committee: Sustainability criteria for bioenergy

16-22   Vienna (Austria)    *    TC 224        Service activities relating to drinking water supply systems and wastewater systems -
                                               Quality criteria of the service and performance indicators

18      Milan (Italy)       *    TC 131/SC 7   Fluid power systems/Sealing devices

18-19   Bratislava               TC 44/SC 10   Welding and allied processes/Unification of requirements in the field of metal welding
        (Slovakia)

18-19   Pau (France)             TC 67/SC 2    Materials, equipment and offshore structures for petroleum, petrochemical and natural
                                               gas industries/Pipeline transportation systems

19-20   Paris (France)      *    TC 87         Cork

20      Kobe (Japan)             TC 22/SC 17   Road vehicles/Visibility

20      Viterbo (Italy)          TC 228        Tourism and related services
20      St. Petersburg          TC 229        Nanotechnologies
        (Russian
        Federation)

22-27   Paris (France)          JTC 1/SC 7    Information technology/Software and systems engineering

22-27   Portland, Oregon   *    TC 184/SC 4   Automation systems and integration/Industrial data
        (USA)

23-24   Stavanger          *    TC 67/SC 4    Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (Norway)                              gas industries/Drilling and production equipment

23-27   La Plaine St-      *    TC 6          Paper, board and pulps
        Denis (France)

23-27   Chicago (USA)      **   TC 23/SC 6    Tractors and machinery for agriculture and forestry/Equipment for crop protection

23-27   Salt Lake City          TC 171        Document management applications
        (USA)

23-27   Kuopio (Finland)   *    TC 215        Health informatics

23-28   Jeju (Korea,       *    TC 147        Water quality
        Republic of)

24      Stockholm               TC 29/SC 2    Small tools/High speed steel cutting tools and their attachments
        (Sweden)

24-26   St. Petersburg          TC 67/SC 5    Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (Russian                              gas industries/Casing, tubing and drill pipe
        Federation)

25      Milan (Italy)      *    TC 136        Furniture

25-27   Salt Lake City          TC 171/SC 1   Document management applications/Quality
        (USA)

26      Berlin (Germany)        TC 20/SC 14   Aircraft and space vehicles/Space systems and operations

26      Stockholm               TC 29/SC 9    Small tools/Tools with cutting edges made of hard cutting materials
        (Sweden)

26-27   Vienna (Austria)   *    JTC 1/SC 31   Information technology/Automatic identification and data capture techniques

26-27   Delft                   TC 211        Geographic information/Geomatics
        (Netherlands)

27      Stockholm               TC 29         Small tools
        (Sweden)

31      Pretoria (South         TC 96/SC 7    Cranes/Tower cranes
        Africa)

May-June 2011

30-1    Pretoria (South         TC 96/SC 6    Cranes/Mobile cranes
        Africa)

30-3    Berlin (Germany)        TC 223        Societal Security

31-2    London (United     *    TC 85/SC 5    Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
        Kingdom)

31-1    Beijing (China)         TC 257        Energy savings

June 2011

1       Pretoria (South    *    TC 96/SC 4    Cranes/Test methods
        Africa)
1       Pretoria (South         TC 96/SC 8    Cranes/Jib cranes
        Africa)

2       Pretoria (South    *    TC 96/SC 5    Cranes/Use, operation and maintenance
        Africa)

3       Pretoria (South         TC 96/SC 3    Cranes/Selection of wire ropes
        Africa)

3       Pretoria (South         TC 96/SC 9    Cranes/Bridge and gantry cranes
        Africa)

4       Pretoria (South         TC 96         Cranes
        Africa)

4       Pretoria (South    *    TC 96/SC 2    Cranes/Terminology
        Africa)

4       Pretoria (South    *    TC 96/SC 10   Cranes/Design principles and requirements
        Africa)

6       Vienna (Austria)        TC 145/SC 1   Graphical symbols/Public information symbols

6-10    Rochester (USA)         TC 42         Photography

7       Vienna (Austria)        TC 145/SC 2   Graphical symbols/Safety identification, signs, shapes, symbols and colours

7       Vienna (Austria)   *    TC 145/SC 3   Graphical symbols/Graphical symbols for use on equipment

8       Cannes (France)         TC 35/SC 12   Paints and varnishes/Preparation of steel substrates before application of paints and
                                              related products

8       Cannes (France)    *    TC 35/SC 14   Paints and varnishes/Protective paint systems for steel structures

8       Vienna (Austria)        TC 145        Graphical symbols

9       Düsseldorf              TC 17/SC 15   Steel/Railway rails and their fasteners
        (Germany)

9       Cannes (France)         TC 35/SC 9    Paints and varnishes/General test methods for paints and varnishes

9-10    Vienna (Austria)        TC 91         Surface active agents

10      Helsinki                JTC 1/SC 2    Information technology/Coded character sets
        (Finland)

10      Cannes (France)    **   TC 35         Paints and varnishes

10      Vancouver          **   TC 192        Gas turbines
        (Canada)

12-17   Seoul (Korea,      *    TC 37         Terminology and other language and content resources
        Republic of)

13-17   Brussels           *    TC 4          Rolling bearings
        (Belgium)

13-17   Tokyo (Japan)      *    TC 69         Applications of statistical methods

13-17   Vancouver               TC 121        Anaesthetic and respiratory equipment
        (Canada)

13-17   Vancouver               TC 121/SC 3   Anaesthetic and respiratory equipment/Lung ventilators and related equipment
        (Canada)

13-17   Vancouver          **   TC 121/SC 6   Anaesthetic and respiratory equipment/Medical gas systems
        (Canada)

13-18   Vancouver          *    TC 121/SC 2   Anaesthetic and respiratory equipment/Airways and related equipment
        (Canada)
14-15   Milan (Italy)           TC 17/SC 17   Steel/Steel wire rod and wire products

14-15   Geneva             *    TMB           Technical Management Board
        (Switzerland)

15      Stockholm               TC 29/SC 5    Small tools/Grinding wheels and abrasives
        (Sweden)

15-17   Kobe (Japan)            TC 8/SC 1     Ships and marine technology/Lifesaving and fire protection

16      London (United          TC 51         Pallets for unit load method of materials handling
        Kingdom)

20-21   Düsseldorf              TC 167        Steel and aluminium structures
        (Germany)

20-21   Milan (Italy)      *    TC 252        Project committee: Natural gas fuelling stations for vehicles

20-22   Bournemouth             TC 34/SC 9    Food products/Microbiology
        (United
        Kingdom)

20-24   Pretoria (South         TC 137        Footwear sizing designations and marking systems
        Africa)

21      Berlin (Germany)   *    TC 10/SC 1    Technical product documentation/Basic conventions

22      Berlin (Germany)   *    TC 10/SC 6    Technical product documentation/Mechanical engineering documentation

22      Berlin (Germany)        TC 10/SC 10   Technical product documentation/Process plant documentation and tpd-symbols

23      Berlin (Germany)        TC 10         Technical product documentation

24      San Diego (USA)         JTC 1/SC 6    Information technology/Telecommunications and information exchange between
                                              systems

26-30   Hollywood,         *    TC 85/SC 6    Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
        Florida (USA)

27-29   Winterthur         *    TC 21/SC 5    Equipment for fire protection and fire fighting/Fixed firefighting systems using water
        (Switzerland)

27-29   Washington, D.C         TC 258        Project, programme and portfolio management
        (USA)

27-30   Suresnes                TC 20/SC 1    Aircraft and space vehicles/Aerospace electrical requirements
        (France)

29      Berlin (Germany)   *    TC 44/SC 6    Welding and allied processes/Resistance welding and allied mechanical joining

29-30   London (United     **   TC 29/SC 10   Small tools/Assembly tools for screws and nuts, pliers and nippers
        Kingdom)

        San Francisco      **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (USA)                                 gas industries/Drilling and completion fluids, and well cements

        Hong Kong          **   TC 71         Concrete, reinforced concrete and pre-stressed concrete
        (Hong Kong,
        China)

        (South Africa)     **   TC 133        Sizing systems and designations for clothes

June-July 2011

27-1    Berlin (Germany)        TC 94/SC 6    Personal safety -- Protective clothing and equipment/Eye and face protection

27-1    Paris (France)     **   TC 188        Small craft

30-1    Pisa (Italy)            TC 22/SC 3    Road vehicles/Electrical and electronic equipment
July 2011

1       Oslo (Norway)            TC 207        Environmental management

11-15   Delft               *    REMCO         Committee on reference materials
        (Netherlands)

24      Turin (Italy)       *    JTC 1/SC 29   Information technology/Coding of audio, picture, multimedia and hypermedia information

August-September 2011

29-2    Warsaw (Poland)     *    JTC 1/SC 35   Information technology/User interfaces

September 2011

9-15    Chicago (USA)       **   TC 163        Thermal performance and energy use in the built environment

12-14   Chicago (USA)       *    TC 205        Building environment design

12-16   Vienna (Austria)    *    TC 108/SC 4   Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
                                               vibration and shock

12-16   Florianopolis       **   TC 150        Implants for surgery
        (Brazil)

12-16   Florianopolis       *    TC 150/SC 1   Implants for surgery/Materials
        (Brazil)

12-16   Rotorua (New        *    TC 218        Timber
        Zealand)

13-15   Moscow              *    TC 67         Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (Russian                               gas industries
        Federation)

15-17   Brescia (Italy)     **   TC 201        Surface chemical analysis

15-22   Beijing (China)     **   TC 213        Dimensional and geometrical product specifications and verification

18-24   Phoenix (USA)            TC 106        Dentistry

18-24   Paris (France)      *    TC 164        Mechanical testing of metals

19      Chicago (USA)       *    TC 21/SC 3    Equipment for fire protection and fire fighting/Fire detection and alarm systems

19      Chicago (USA)       *    TC 21/SC 11   Equipment for fire protection and fire fighting/Smoke and heat control systems and
                                               components

19-20   Paris (France)      *    TC 164/SC 3   Mechanical testing of metals/Hardness testing

19-20   New Delhi (India)   *    TMB           Technical Management Board

19-22   Paris (France)      *    TC 164/SC 4   Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

19-23   Seoul (Korea,       *    JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)
        Republic of)

19-23   Bali (Indonesia)    *    TC 165        Timber structures

19-23   Adelaide            *    TC 190        Soil quality
        (Australia)

19-23   Adelaide            *    TC 190/SC 1   Soil quality/Evaluation of criteria, terminology and codification
        (Australia)

19-23   Adelaide            *    TC 190/SC 3   Soil quality/Chemical methods and soil characteristics
        (Australia)

19-23   Adelaide            *    TC 190/SC 4   Soil quality/Biological methods
        (Australia)
19-23   Adelaide            *    TC 190/SC 7   Soil quality/Soil and site assessment
        (Australia)

20      Chicago (USA)       **   TC 21/SC 6    Equipment for fire protection and fire fighting/Foam and powder media and fixed
                                               firefighting systems using foam and powder

20      Berlin (Germany)    *    TC 29/SC 8    Small tools/Tools for pressing and moulding

20-22   Paris (France)      *    TC 164/SC 5   Mechanical testing of metals/Fatigue testing

20-23   Washington, D.C     **   TC 172/SC 5   Optics and photonics/Microscopes and endoscopes
        (USA)

21      Chicago (USA)       *    TC 21/SC 2    Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

21      Vienna (Austria)    *    TC 146/SC 6   Air quality/Indoor air

21      Paris (France)      *    TC 164/SC 2   Mechanical testing of metals/Ductility testing

21-22   Chicago (USA)       *    TC 21/SC 8    Equipment for fire protection and fire fighting/Gaseous media and firefighting systems
                                               using gas

21-23   New Delhi (India)   **   GA            General Assembly

22      Sao Paulo           *    TC 142        Cleaning equipment for air and other gases
        (Brazil)

22-23   Las Vegas                TC 159/SC 4   Ergonomics/Ergonomics of human-system interaction
        (USA)

22-23   Paris (France)      *    TC 164/SC 1   Mechanical testing of metals/Uniaxial testing

23      Chicago (USA)       *    TC 21         Equipment for fire protection and fire fighting

24      New Delhi (India)   *    COUNCIL       Council

26-27   Geneva              *    TAG 8         Building
        (Switzerland)

26-27   La Plaine St-            TC 206        Fine ceramics
        Denis (France)

        Shanghai            **   JTC 1/SC 36   Information technology/Information technology for learning, education and training
        (China)

        Edinburgh           **   TC 24/SC 4    Particle characterization including sieving/Particle characterization
        (United
        Kingdom)

        (Unknown)           **   TC 44/SC 9    Welding and allied processes/Health and safety

        London (United      **   TC 59/SC 2    Buildings and civil engineering works/Terminology and harmonization of languages
        Kingdom)

        (France)            **   TC 59/SC 8    Buildings and civil engineering works/Sealants

        (Malaysia)          **   TC 61/SC 4    Plastics/Burning behaviour

3rd Quarter 2011

        (United             **   TC 41/SC 1    Pulleys and belts (including veebelts)/Friction
        Kingdom)

        (United             **   TC 41/SC 3    Pulleys and belts (including veebelts)/Conveyor belts
        Kingdom)

        (United             **   TC 41/SC 4    Pulleys and belts (including veebelts)/Synchronous belt drives
        Kingdom)

        Sapporo (Japan)     **   TC 184/SC 1   Automation systems and integration/Physical device control
        Mexico (Mexico)    **   TC 253        Project committee: Treated wastewater re-use for irrigation

October 2011

3-7     Sydney             *    TC 89         Wood-based panels
        (Australia)

3-7     London (United     *    TC 146/SC 2   Air quality/Workplace atmospheres
        Kingdom)

6-7     Geneva             *    CASCO         Committee on conformity assessment
        (Switzerland)

9-14    Beijing (China)    *    TC 27         Solid mineral fuels

10-14   (Unknown)          **   TC 25         Cast irons and pig irons

10-14   (Japan)            **   TC 34/SC 17   Food products/Management systems for food safety

10-14   Nanjing (China)    **   TC 193/SC 1   Natural gas/Analysis of natural gas

10-14   Tampa, Florida     *    TC 204        Intelligent transport systems
        (USA)

10-14   Milan (Italy)      *    TC 209        Cleanrooms and associated controlled environments

16-21   Suzhou (China)     *    TC 184/SC 4   Automation systems and integration/Industrial data

17-19   Tokyo (Japan)      *    TC 5/SC 2     Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints

17-20   Yokohama           *    TC 45/SC 2    Rubber and rubber products/Testing and analysis
        (Japan)

17-21   Berlin (Germany)   *    TC 2          Fasteners

17-21   Berlin (Germany)   *    TC 2/SC 7     Fasteners/Reference standards

17-21   Berlin (Germany)   *    TC 2/SC 11    Fasteners/Fasteners with metric external thread

17-21   Berlin (Germany)   *    TC 2/SC 12    Fasteners/Fasteners with metric internal thread

17-21   Berlin (Germany)   *    TC 2/SC 13    Fasteners/Fasteners with non-metric thread

17-21   Berlin (Germany)   *    TC 2/SC 14    Fasteners/Surface coatings

17-21   Yokohama           *    TC 45         Rubber and rubber products
        (Japan)

18-20   London (United     *    TC 202        Microbeam analysis
        Kingdom)

21      Courbevoie,        *    TC 244        Industrial furnaces and associated processing equipment
        Paris (France)

24-28   Tokyo (Japan)           TC 38         Textiles

24-28   Tokyo (Japan)           TC 38/SC 2    Textiles/Cleansing, finishing and water resistance tests

24-28   Tokyo (Japan)           TC 38/SC 20   Textiles/Fabric descriptions

24-28   Tokyo (Japan)           TC 38/SC 23   Textiles/Fibres and yarns

24-28   Tokyo (Japan)           TC 38/SC 24   Textiles/Conditioning atmospheres and physical tests for textile fabrics

24-28   Moscow             **   TC 178        Lifts, escalators and moving walks
        (Russian
        Federation)

24-29   Beijing (China)    *    TC 176        Quality management and quality assurance
25-27   Beltsville,        *    TC 34/SC 16   Food products/Horizontal methods for molecular biomarker analysis
        Maryland (USA)

25-28   Amsterdam          **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Netherlands)                         soil, waste and drainage (including land drainage)

26      Amsterdam          *    TC 138/SC 2   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Netherlands)                         water supplies

26      Amsterdam          **   TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Netherlands)                         the supply of gaseous fuels

27      Amsterdam          **   TC 138/SC 3   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Netherlands)                         industrial applications

27-28   (Europe)           **   TC 44         Welding and allied processes

        (Korea, Republic   **   JTC 1/SC 17   Information technology/Cards and personal identification
        of)

        London (United     **   TC 59/SC 15   Buildings and civil engineering works/Performance criteria for single family attached and
        Kingdom)                              detached dwellings

        (China)            **   TC 111        Round steel link chains, chain slings, components and accessories

        (China)            **   TC 111/SC 1   Round steel link chains, chain slings, components and accessories/Chains and chain
                                              slings

        (China)            **   TC 111/SC 3   Round steel link chains, chain slings, components and accessories/Components and
                                              accessories

        (Netherlands)      **   TC 138        Plastics pipes, fittings and valves for the transport of fluids

        Amsterdam          **   TC 138/SC 5   Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes,
        (Netherlands)                         fittings and valves of plastic materials and their accessories -- Test methods and basic
                                              specifications

        Vienna (Austria)   **   TC 146/SC 1   Air quality/Stationary source emissions

        Berlin (Germany)   **   TC 160/SC 1   Glass in building/Product considerations

October-November 2011

31-3    London (United     **   TC 46/SC 11   Information and documentation/Archives/records management
        Kingdom)

November 2011

2-4     Bangkok            *    TC 123        Plain bearings
        (Thailand)

2-4     Bangkok            *    TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods
        (Thailand)                            and testing conditions

2-4     Bangkok            *    TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
        (Thailand)

2-4     Bangkok            *    TC 123/SC 5   Plain bearings/Quality analysis and assurance
        (Thailand)

2-4     Bangkok            *    TC 123/SC 6   Plain bearings/Terms and common items
        (Thailand)

2-4     Bangkok            *    TC 123/SC 7   Plain bearings/Special types of plain bearings
        (Thailand)

4       Cincinnati (USA)   *    TC 60         Gears

4       (Malaysia)         **   TC 238        Solid biofuels
7-11    Osaka (Japan)      **   TC 94/SC 13   Personal safety -- Protective clothing and equipment/Protective clothing

7-12    (USA)              *    JTC 1         Information technology

10      Annapolis (USA)    *    TC 70/SC 7    Internal combustion engines/Tests for lubricating oil filters

10-11   Venice (Italy)     *    TC 227        Springs

14-16   Nagoya (Japan)     **   TC 189        Ceramic tile

14-18   (South Africa)     **   TC 229        Nanotechnologies

17      Munich             *    TC 44/SC 12   Welding and allied processes/Soldering materials
        (Germany)

21-22   Berlin (Germany)   *    TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

21-25   Stellenbosch       **   TC 98         Bases for design of structures
        (South Africa)

        (Unknown)          **   TC 34/SC 7    Food products/Spices, culinary herbs and condiments

        (Japan)            **   TC 38/SC 24   Textiles/Conditioning atmospheres and physical tests for textile fabrics

        Pau (France)       **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural
                                              gas industries/Drilling and completion fluids, and well cements

November-December 2011

26-1    (Israel)           **   TC 23/SC 18   Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment
                                              and systems

December 2011

5-9     Sydney             *    TC 108/SC 5   Mechanical vibration, shock and condition monitoring/Condition monitoring and
        (Australia)                           diagnostics of machines

4th Quarter 2011

        (USA)              **   TC 30/SC 7    Measurement of fluid flow in closed conduits/Volume methods including water meters

        (Japan)            **   TC 172/SC 3   Optics and photonics/Optical materials and components

        (South Africa)     **   TC 211        Geographic information/Geomatics

2nd Semester 2011

        Tokyo (Japan)      **   TC 130        Graphic technology

Month unknown 2011

        (North America)    **   JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                              representation

        Kyoto (Japan)      **   TC 33         Refractories

January 2012

        Charlotte (USA)    **   TC 213        Dimensional and geometrical product specifications and verification

February 2012

20-24   Kyoto (Japan)      *    JTC 1/SC 35   Information technology/User interfaces

22-23   Geneva             *    TMB           Technical Management Board
        (Switzerland)

        Florida (USA)      **   TC 115        Pumps
        (USA)              **   TC 184/SC 2   Automation systems and integration/Robots and robotic devices

February-March 2012

25-5    Toulouse           **   TC 34/SC 12   Food products/Sensory analysis
        (France)

March 2012

29      (Unknown)          **   TC 23/SC 19   Tractors and machinery for agriculture and forestry/Agricultural electronics

        (China)            **   JTC 1/SC 6    Information technology/Telecommunications and information exchange between
                                              systems

        (Australia)        **   JTC 1/SC 36   Information technology/Information technology for learning, education and training

        (Korea, Republic   **   JTC 1/SC 36   Information technology/Information technology for learning, education and training
        of)

        (Italy)            **   TC 172/SC 7   Optics and photonics/Ophthalmic optics and instruments

April 2012

11-12   (Finland)          **   TC 117        Fans

16-20   Durban (South      **   TC 135        Non-destructive testing
        Africa)

        Bern               **   TC 113        Hydrometry
        (Switzerland)

        Durban (South      **   TC 135/SC 3   Non-destructive testing/Ultrasonic testing
        Africa)

        Durban (South      **   TC 135/SC 5   Non-destructive testing/Radiation methods
        Africa)

May 2012

7-11    Berlin (Germany)   **   TC 46         Information and documentation

10      Chicago (USA)      **   TC 68         Financial services

        (Unknown)          **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

        (Unknown)          **   TC 126        Tobacco and tobacco products

June 2012

6-7     Geneva             **   COPOLCO       Committee on consumer policy
        (Switzerland)

13-14   Geneva             *    TMB           Technical Management Board
        (Switzerland)

        Calgary            **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural
        (Canada)                              gas industries/Drilling and completion fluids, and well cements

2nd Quarter 2012

        (France)           **   TC 211        Geographic information/Geomatics

August 2012

27-31   Montreal           **   JTC 1/SC 35   Information technology/User interfaces
        (Canada)

September 2012

3-8     Zurich             **   TC 142        Cleaning equipment for air and other gases
        (Switzerland)

19-21   San Diego (USA) **       GA            General Assembly

22      San Diego (USA) **       COUNCIL       Council

        Zibo city (China)   **   TC 206        Fine ceramics

        Cadiz (Spain)       **   TC 213        Dimensional and geometrical product specifications and verification

October 2012

24      Sydney              **   TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Australia)                            the supply of gaseous fuels

        (Unknown)           **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

November 2012

        Tokyo (Japan)       **   TC 17/SC 1    Steel/Methods of determination of chemical composition

4th Quarter 2012

        (Saudi Arabia)      **   TC 211        Geographic information/Geomatics

Month unknown 2012

        (Europe)            **   JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                               representation

        Vienna (Austria)    **   REMCO         Committee on reference materials

        Delft               **   TC 23/SC 6    Tractors and machinery for agriculture and forestry/Equipment for crop protection
        (Netherlands)

        (Unknown)           **   TC 34         Food products

        Chicago (USA)       **   TC 68/SC 4    Financial services/Securities and related financial instruments

        (South Africa)      **   TC 102        Iron ore and direct reduced iron

        Berlin (Germany)    **   TC 107        Metallic and other inorganic coatings

        Sydney              **   TC 138        Plastics pipes, fittings and valves for the transport of fluids
        (Australia)

        Sydney              **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
        (Australia)                            soil, waste and drainage (including land drainage)

        (Unknown)           **   TC 146        Air quality

        (Brazil)            **   TC 164        Mechanical testing of metals

        (Finland)           **   TC 190        Soil quality

        (China)             **   TC 202        Microbeam analysis

        (France)            **   TC 205        Building environment design

        (Thailand)          **   TC 207        Environmental management

February-March 2013

25-1    (South America)     **   JTC 1/SC 35   Information technology/User interfaces

March 2013
        (Kenya)            **   JTC 1/SC 36   Information technology/Information technology for learning, education and training

August 2013

26-30   (South America)    **   JTC 1/SC 35   Information technology/User interfaces

September 2013

        (Korea, Republic   **   TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods
        of)                                   and testing conditions

        (Korea, Republic   **   TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
        of)

        (Korea, Republic   **   TC 123/SC 5   Plain bearings/Quality analysis and assurance
        of)

        (Korea, Republic   **   TC 123/SC 6   Plain bearings/Terms and common items
        of)

        (Korea, Republic   **   TC 123/SC 7   Plain bearings/Special types of plain bearings
        of)

        Tokyo (Japan)      **   TC 142        Cleaning equipment for air and other gases

October 2013

        Mexico (Mexico)    **   TC 113        Hydrometry

Month unknown 2013

        (USA)              **   REMCO         Committee on reference materials

        (Unknown)          **   TC 38/SC 1    Textiles/Tests for coloured textiles and colorants

        (Norway)           **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
                                              soil, waste and drainage (including land drainage)

Month unknown 2014

        (USA)              **   TC 142        Cleaning equipment for air and other gases

Month unknown 2015

        London (United     **   TC 142        Cleaning equipment for air and other gases
        Kingdom)

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:12
posted:8/29/2012
language:English
pages:39