WATERPROOF TFT- LCD TV by wuyunyi

VIEWS: 20 PAGES: 12

									                                                                                          WATERPROOF TFT-LCD TV
                                                                                                    USER      MANUAL




copyright and intellectual property rights
The original manufacturer exclusively own or are licensed to use all copyright and
other intellectual property rights of this waterproof LCD TV, including the product
design, inside structure design, software, and all technical infrastructure relating to
it. Any other companies or persons using or violating the mentioned content without
the authorization will be taken into legal action.

                                                                                          10.4 "/15" /17" /19" /22" /26" /32" series
            IP65
Note
The information in this manual is subject to change without notice.

Thank You for Choosing This Waterproof LCD TV
Dear Customer,
May we take this opportunity to thank you for purchasing this Waterproof LCD
TV. We strongly recommend that you carefully study the Operating
Instructions before attempting to operate the unit and that you note the listed
precautions.

I. SAFETY INSTRUCTIONS
* Read instructions: All safety/operating instructions should be read before
  the product is operated.
* Keep these instructions: These instructions should be retained for future
  reference.
* Observe all warnings: Adhere to all warnings on the appliance and in the
  operating instructions.
* Follow all instructions: All operating instructions should be followed.
* Accessories: Only use accessories specified by the manufacturer.
* Check for any possible hazards first such as pipes, electrical cables etc.
  before the installation.
* Do not open the Waterproof LCD TV, contact your dealer if the TV is not
  operating properly.
* Do not attempt to disassemble the unit. There will be no warranty claim in
  this case.
* Do not drop the unit or make any scratch on the panel when you move the
  product. Any scratch on the panel or drop of the product may cause
  functional failure.
* Do not press hard with your finger or scratch with sharp object on the surface
  of the LCD, any damage on the surface of the LCD may cause functional
  failure.
* Install the TV in stable place. An unstable TV may crash or fall, personal
  injury, damage, or malfunction may result.
* When moving the Waterproof LCD TV, turn it off and disconnect all cables
  and the plug. Product damage, electrical shock, or fire hazard may result.
* Non-use periods: Unplug this product during lightning storms or non-using
  periods. When the unit is not used, turn the power off.
* Clean only with a light damp cloth. Unplug the power cord from the AC



                                                                                   1
       outlet before cleaning the product. Do not use any solvent-containing           II. ACCESSORIES
       detergents for cleaning.                                                        Please make sure that the following accessories are in the box when you open it.
    * Power cord protection: To avoid any malfunctions of the unit and to protect
       yourself against electric shock, fire or personal injury, please observe the    Note: Pictures may deviate.
       following:
    - Hold the plug firmly when connecting or disconnecting the AC power cord to
      this unit.
    - Do not connect or disconnect the AC power cord when your hands are wet.               user manual                power supply           remote comroller
    - Keep the AC power cord away from heating appliances, as the sheathing of
      the cord may melt.
    - Never put any heavy object on the AC power cord.
    - Do not attempt to repair or reconstruct the AC power cord in any way.                                                                                                                                                             DIS
                                                                                                                                                                                                                                              PL
                                                                                                                                                                                                                                                  PO




                                                                                                                                                                                                                                                   AY
                                                                                                                                                                                                                                                       WE




                                                                                                                                                                                                                                                        RE
                                                                                                                                                                                                                                                            R




                                                                                                                                                                                                                                                             CA
                                                                                                                                                                                                                                                                  TV




                                                                                                                                                                                                                                                                  LL
                                                                                                                                                                                                                                                                        /AV
                                                                                                                                                                                                                                                                                      TIM
                                                                                                                                                                                                                                                                                            ER
                                                                                                                                                                                                                                                                                                       MU
                                                                                                                                                                                                                                                                                                            TE
                                                                                                                                                                                                                                    OK                                      SO
                                                                                                                                                                                                                                                                                 UN




    - Remove dust, dirt, etc. on the plug at regular intervals.
                                                                                                                                                                                                                                                                                      D
                                                                                                                                                                                                                                                                                            PIC
                                                                                                                                                                                                                                                                                                  TU
                                                                                                                                                                                                                                                                                                       RE



                                                                                                                                                                                                                                                                                      FAV


                                                                                                                                                                                                                 TT                          ME
                                                                                                                                                                                                                      X
                                                                                                                                                                                                                                                   NU


                                                                                                     USER MANUAL
    - If the unit has been dropped or otherwise damaged, turn off the power and                                                                                                    1
                                                                                                                                                                                               RE
                                                                                                                                                                                                    EP


                                                                                                                                                                                                    D
                                                                                                                                                                                                         G



                                                                                                                                                                                                             GR
                                                                                                                                                                                                                 SUB


                                                                                                                                                                                                                  EE
                                                                                                                                                                                                                    TITL
                                                                                                                                                                                                                        E

                                                                                                                                                                                                                          N
                                                                                                                                                                                                                              YE
                                                                                                                                                                                                                                   LL
                                                                                                                                                                                                                                        LR


                                                                                                                                                                                                                                        OW
                                                                                                                                                                                                                                               CY
                                                                                                                                                                                                                                                   DTV



                                                                                                                                                                                                                                                    AN
                                                                                                                                                                                                                                                      -MEN
                                                                                                                                                                                                                                                          U
                                                                                                                                                                                                                                                                  INF
                                                                                                                                                                                                                                                                        O




                                                                                                                                                                                                    2


      disconnect the AC power cord.                                                                                                                                 0
                                                                                                                                                                         7
                                                                                                                                                                              4


                                                                                                                                                                                   8
                                                                                                                                                                                           5


                                                                                                                                                                                                9
                                                                                                                                                                                                             6
                                                                                                                                                                                                                      3
                                                                                                                                                                                                                               VO
                                                                                                                                                                                                                                    L




    - If smoke, occurs or noises are emitted from the unit, turn off the power and                                                                Wa
                                                                                                                                                       ter
                                                                                                                                                             Wa
                                                                                                                                                                 ter
                                                                                                                                                             pr oo pr oo
                                                                                                                                                                  f re
                                                                                                                                                                       mo
                                                                                                                                                                          f LC
                                                                                                                                                                               D TV
                                                                                                                                                                                                                 CH




                                                                                                                                                                          te
                                                                                                                                                                             co




      disconnect the AC power cord.
                                                                                                                                                                                ntr
                                                                                                                                                                                    oll
                                                                                                                                                                                          er




    * The power cord must be routed properly to prevent people from stepping on
      them or objects from resting on them. Check the cords at the plugs and
      product. Do not damage, break or alter the electric cord. Do not cover the
      cord under a carpet or similar covering, as you may not be aware of it and
                                                                                            screws                 back cover(optional)
      may place heavy objects on it or damage it.
    * Power supply: This product must operate on a power source specified on the
      specification label. If you are not sure of the type of power supply used in
      your home, consult your dealer or local power company.
    * Servicing: Do not attempt to service the product yourself. Removing covers
      may expose you to high voltage and other dangerous conditions. Refer to
      qualified service personnel for servicing.
    * Replacement parts: In case the product needs replacement parts, please make
      sure that the service person uses replacement parts specified by the
      manufacturer. Any use of unauthorized parts may result in fire, electric shock
      and/or other danger.




                                                                                       If any items are missing, contact your dealer.




2                                                                                                                                                                                                                                                                                                                3
    III. OUTLOOK OF THE WATERPROOF LCD                        4. CONTROLLING BUTTONS

    1. TV FRONT VIEW

         1
         2
         3

         4
                                                 5
    1.       Glass front panel
    2.       LCD panel                                        1.   MENU: Main menu: To call up or cancel the main menu.
    3.       Speakers                                         2.   VOL- / VOL+ : For increasing and decreasing the volume.
    4.       Controlling keys                                 3.   CH- / CH+ : For changing channels.
    5.       Trunk-nails (optional)                           4.   TV/AV : Switch from the TV/AV/S-VIDEO/DTV/SCART/PC modes
                                                              5.   POWER : Turns the TV on or off 6. IR : Remote control sensor

    2. REAR VIEW


         1
         2
         3



    1.       Back cover
    2.       Mounting anchors
    3.       VESA holes


    3. INPUT TERMINALS


                                1.DC 12V input
                                2.Antenna input
                                3.S-VIDEO input
                                4.Video input (yellow)
                                5.Audio input (red & white)
                                6.VGA input (optional)




4                                                                                                                                 5
    5. REMOTE CONTROLLER                                    POWER       Switch on/off: To switch the TV on or off
                                                            MUTE        Muting the sound: To turn off the sound.
                                                            ESC         Leave the current OSD menu
                                                            DISPLAY     Display the channel info (TV mode)
                                                            AUTO        Automatically adjust the PC mode status (PC mode)
                     POWER                         MUTE
                                                            INPUT       Switch from the TV/AV/S-VIDEO/PC modes
                                                            MENU        To display the system OSD menu
                                                            VOL-/VOL+   For increasing and decreasing the volume.
                     ESC             CH+          DISPLAY
                                                                        For moving the cursor to the left or right in the menu.
                                                            CH-/CH+     For changing channels.
                                                                        For moving the cursor up and down in the menu.
                          VOL-       MENU       VOL+
                                                            0..9        Number buttons: 0-9. Direct input of the TV channel.
                                                             -/--       Press the 0-9 directly into the expected channel.
                     AUTO             CH-         INPUT
                                                                      * For example
                                                                        Press -/-- then press 1       channel 1
                                                                        Press -/-- then press 1,2     channel 12
                                                                        Press -/-- then press 1,2,3 channel 123
                                                            RETURN      Return to the previous selected channel in TV mode
                      1          2          3          4


                      5          6          7          8

                      9          0                RETURN




                             Waterproof LCD TV
                     Waterproof remote controller




6                                                                                                                                 7
    IV. OSD MENU
    1. TV MODE                                                                                                        1.Enter the tint adjustment
       1. Press MENU to display the system menu.                                                CONTRAST
                                                                                                                      menu
                                                                             Adjust the         BRIGHTNESS
                                                                                                SHARPNESS
       2. Pre VOL-/VOL+ to select the functional controlling menu,             Tint             TINT
                                                                                                SATURATION
                                                                                                                      2.Adjust the tint by
                                                                                                BACK
          press MENU to enter the selected item.                                                                      VOL-/VOL Until it meets
       3. Press CH-/CH+ to select the needed item, press MENU to enter it.                              PAL I
                                                                                                                      your requirement
       4. Press VOL-/VOL+ to adjust, press MENU to confirm the adjustment.
       5.Press ESC to leave the current OSD menu
                                                                                                                      1.Enter the saturation
                                                                                                                      adjustment menu
                                                                             Adjust the         CONTRAST
                                                                                                BRIGHTNESS
                                                                                                SHARPNESS
                                                                             Saturation         TINT
                                                                                                SATURATION            2.Adjust the saturation by
                                                                                                BACK
                                                                                                                      VOL-/VOL Until it meets
      Function              Display                 Remark                                                            your requirement
      Selection                                                                                         PAL I




                                            1.Enter the contrast
                         CONTRAST           adjustment menu                                                           1.Enter the OSD of 123/
      Adjust the         BRIGHTNESS
                         SHARPNESS
                         TINT                                                             123                         SKIP adjustment menu
      Contrast           SATURATION
                                            2.Adjust the contrast by                      P N
                                                                                                SKIP
                                                                                                SYSTEM
                         BACK
                                                                              Skip the          TUNING
                                                                                                SWAP
                                            VOL-/VOL Until meets              Channel           AUTO SCAN
                                                                                                MANUAL SERACH         2.Skip the channel by
                               PAL I
                                            your requirement                                    BACK
                                                                                                                      VOL-/VOL
                                                                                                    2           OFF
                                                                                                        PAL I

                                            1.Enter the brightness
                                            adjustment menu
                         CONTRAST
                         BRIGHTNESS                                                                                   1. Enter the System
      Adjust the         SHARPNESS
                         TINT                                                                                         adjusting menu
      Brightness         SATURATION         2.Adjust the brightness by
                         BACK
                                            VOL-/VOL Until it meets
                                                                                          123
                                                                                          P N
                                                                                                SKIP
                                                                                                SYSTEM
                                                                                                                      2. Choose the proper Video
                                                                             TV System          TUNING
                                                                                                                      system(PAL/SECAM/NTS
                                            your requirement                                    SWAP
                                                                                                AUTO SCAN
                               PAL I                                                            MANUAL SERACH
                                                                                                BACK
                                                                                                                      C)and proper Audio
                                                                                                        PAL I         system(B/G/D/K /I/ L/L'
                                            1.Enter the sharpness                                       PAL I         M/N)
                         CONTRAST           adjustment menu
                         BRIGHTNESS
      Adjust the         SHARPNESS
                         TINT
      Sharpness          SATURATION
                         BACK               2.Adjust the sharpness by
                                            VOL-/VOL Until it meets                       123
                                                                                          P N
                                                                                                SKIP
                                                                                                SYSTEM
                                            your requirement                                    TUNING                      Search Channel in
                               PAL I
                                                                              TUNING            SWAP
                                                                                                AUTO SCAN
                                                                                                                            tiny range
                                                                                                MANUAL SERACH
                                                                                                BACK



                                                                                                        PAL I




8                                                                                                                                                   9
                     123
                     P N
                           SKIP
                           SYSTEM
                                                                                         OSD H.POS
                                                                                         OSD V.POS
                                                                                                                1. Enter the OSD      TIME
                           TUNING          Exchange the sequence          Adjust the     OSD TIME
                                                                                                                adjustment menu
        SWAP               SWAP                                                          OSD COLOR
                           AUTO SCAN
                           MANUAL SERACH   between two channels           OSD TIME       OSD ALPHA
                                                                                         OSD ZOOM
                           BACK
                                                                                         BACK
                                     1                                                                          2.Adjust the OSD time
                                 PAL I                                                            PAL I




                                                                                                                1. Enter the OSD color
                     123
                     P N
                           SKIP
                           SYSTEM
                                           Scan the channels and           Adjust the    OSD H.POS
                                                                                         OSD V.POS
                                                                                                                adjustment menu
      Auto Scan            TUNING
                           SWAP            memorize the channels          color of OSD   OSD TIME
                                                                                         OSD COLOR
                                                                                                                2. Choose your favorite
                           AUTO SCAN
                           MANUAL SERACH
                           BACK
                                           automatically                     picture
                                                                                         OSD ALPHA
                                                                                         OSD ZOOM               color of the OSD pictures
                                                                                         BACK
                                                                                                                3. There are 5 colors for
                                 PAL I                                                            PAL I         choosing



                     123
                     P N
                           SKIP
                           SYSTEM
                                                                                         OSD H.POS
                                                                                         OSD V.POS
                                                                                                                This function can make the
       Manual              TUNING
                           SWAP            Scan the channel manually .                   OSD TIME
                                                                                                                background of OSD to be
       Search
                           AUTO SCAN                                      OSD ALPHA      OSD COLOR
                                                                                         OSD ALPHA
                           MANUAL SERACH
                           BACK                                                          OSD ZOOM
                                                                                         BACK
                                                                                                                transparent .
                                                                                                     0
                                 PAL I                                                            PAL I




       Adjust the          OSD H.POS
                                           1. Enter the OSD H -POS                       OSD H.POS              This function can adjust the
                           OSD V.POS                                                     OSD V.POS
      OSD picture          OSD TIME
                           OSD COLOR       adjustment menu                               OSD TIME               size of OSD.
     in Horizontal         OSD ALPHA                                      OSD ZOOM       OSD COLOR
                                                                                         OSD ALPHA
                           OSD ZOOM
                           BACK
                                           2.Adjust the position of the                  OSD ZOOM
                                                                                         BACK
        position                           OSD picture by VOL-/VOL.                         ON            OFF
                                 PAL I                                                            PAL I




      Adjust the                                                                                                Enter the OSD language
                           OSD H.POS
                           OSD V.POS
                                           1. Enter the OSD V -POS                       ENGLISH
                                                                                         FRENCH                 item, There are 7 language
     OSD picture           OSD TIME
                                           adjustment menu                   OSD         GERMAN

      in Vertical
                           OSD COLOR
                           OSD ALPHA
                                                                          LANGUAGE
                                                                                         SPANISH
                                                                                                                for choice. English ,
                           OSD ZOOM
                           BACK
                                           2.Adjust the position of the                  RUSSIA
                                                                                                                French, German, Spanish,
       position                            OSD picture by VOL-/VOL.
                                                                                         ITALY


                                 PAL I
                                                                                                                Chinese 1, Russia, Italian
                                                                                                  PAL I




10                                                                                                                                             11
                     RESET                                                                     RESET

     Reset all the
                     VOLUME
                     MUTE                 This function help to reset
                                                                                               VOLUME
                                                                                               MUTE                   Adjust the screen size
                     AUTO START                                            Panel Adjust        AUTO START
                                                                                               AUTO CLOSE             between 4:3/16:9
      function       AUTO CLOSE
                     PANEL ADJUST         all the OSD menu .                                   PANEL ADJUST
                                                                                               BACK
                     BACK
                                                                                                       4 :3

                           PAL I                                                                     PAL I




                     RESET                1 . E n t e r t h e Vo l u m e
                     VOLUME
     Adjust the      MUTE
                     AUTO START
                                          adjustment menu                       Exit                                 Exit the current menu.
      Volume         AUTO CLOSE
                     PANEL ADJUST         2. Adjust the volume by
                     BACK
                                          VOL-/VOL.
                           PAL I                                                                        PAL I




                     RESET                This function can help to        1.   Press MENU to display the system menu.
         Mute
                     VOLUME
                     MUTE                 cancel the sound .               2.   Pre VOL-/VOL+ to select the functional controlling menu,
       function
                     AUTO START
                                                                                press MENU to enter the selected item.
                     AUTO CLOSE
                     PANEL ADJUST         Use VOL-/VOL can resume          3.   Press CH-/CH+ to select the needed item, press MENU to enter it.
                     BACK
                         ON         OFF   the sound.                       4.   Press VOL-/VOL+ to adjust, press MENU to confirm the adjustment.
                           PAL I                                           5.   Press ESC to leave the current OSD menu

                                                                            Function               Display                   Remark
                                                                            Selection

                     RESET
                     VOLUME
                                                                                                                     1.Enter the contrast
      Auto Start
                     MUTE
                     AUTO START           Set a time to Auto start.                             CONTRAST             adjustment menu
                     AUTO CLOSE
                     PANEL ADJUST
                                                                            Adjust the          BRIGHTNESS
                                                                                                SHARPNESS
                                                                                                TINT
                     BACK
                           - 0 +
                                                                            Contrast            SATURATION
                                                                                                BACK                 2.Adjust the contrast by
                           PAL I                                                                                     VOL-/VOL Until it meets
                                                                                                      PAL I
                                                                                                                     your requirement

                                                                                                                     1.Enter the brightness
                     RESET
                     VOLUME                                                                     CONTRAST
                                                                                                                     adjustment menu
                     MUTE                                                                       BRIGHTNESS

      Auto Close     AUTO START
                     AUTO CLOSE           Set a time to Auto close.        Adjust the           SHARPNESS
                                                                                                TINT
                     PANEL ADJUST
                     BACK                                                  Brightness           SATURATION
                                                                                                BACK
                                                                                                                     2.Adjust the brightness by
                           - 0 +                                                                                     VOL-/VOL until it meets
                           PAL I
                                                                                                      PAL I
                                                                                                                     your requirement




12                                                                                                                                                 13
                                   1.Enter the sharpness
                     CONTRAST      adjustment menu                               OSD H.POS
                                                                                                        1. Enter the OSD      TIME
                     BRIGHTNESS
      Adjust the     SHARPNESS
                                                                  Adjust the
                                                                                 OSD V.POS
                                                                                 OSD TIME
                     TINT
                                                                                 OSD COLOR              adjustment menu
      Sharpness      SATURATION
                     BACK          2.Adjust the sharpness by      OSD TIME       OSD ALPHA
                                                                                 OSD ZOOM
                                   VOL-/VO Luntil it meets                       BACK
                                                                                                        2.Adjust the OSD time
                           PAL I   your requirement                                       PAL I




                                   1.Enter the tint adjustment                                          1. Enter the OSD color
                                   menu                                                                 adjustment menu
      Adjust the
                     CONTRAST
                     BRIGHTNESS                                    Adjust the    OSD H.POS
                                                                                 OSD V.POS

        Tint
                     SHARPNESS
                     TINT                                         color of OSD   OSD TIME
                                                                                 OSD COLOR
                                                                                                        2. Choose your favorite
                     SATURATION
                                   2.Adjust the tint by                          OSD ALPHA
                                                                                                        color of the OSD pictures
                     BACK
                                                                     picture     OSD ZOOM
                                   VOL-/VOL Until it meets                       BACK
                                                                                                        3. There are 5 colors for
                           PAL I
                                   your requirement                                       PAL I         choosing


                                   1.Enter the saturation
                                   adjustment menu
      Adjust the     CONTRAST
                     BRIGHTNESS
                     SHARPNESS
                                                                                 OSD H.POS
                                                                                 OSD V.POS
                                                                                                        This function can make the
      Saturation     TINT
                     SATURATION    2.Adjust the saturation by     OSD ALPHA
                                                                                 OSD TIME
                                                                                 OSD COLOR              background of OSD to be
                     BACK                                                        OSD ALPHA

                                   VOL-/VOL Until it meets                       OSD ZOOM
                                                                                 BACK
                                                                                                        transparent .
                           PAL I
                                   your requirement                                          0
                                                                                          PAL I




       Adjust the    OSD H.POS     1. Enter the OSD H -POS                       OSD H.POS
                     OSD V.POS                                                   OSD V.POS
      OSD picture    OSD TIME
                     OSD COLOR
                                   adjustment menu                               OSD TIME               This function can adjust the
     in Horizontal   OSD ALPHA
                     OSD ZOOM      2.Adjust the position of the   OSD ZOOM       OSD COLOR
                                                                                 OSD ALPHA              size of OSD.
                                                                                 OSD ZOOM
                     BACK
        position                   OSD picture by VOL-/VOL.                      BACK
                                                                                    ON            OFF
                           PAL I                                                          PAL I




                                                                                                        Enter the OSD language
      Adjust the     OSD H.POS     1. Enter the OSD V -POS                       ENGLISH
                                                                                                        item, There are 7 language
                     OSD V.POS
     OSD picture     OSD TIME
                     OSD COLOR     adjustment menu                   OSD         FRENCH
                                                                                 GERMAN                 for choice. English ,
                                                                                 SPANISH
      in Vertical    OSD ALPHA
                     OSD ZOOM      2.Adjust the position of the   LANGUAGE       RUSSIA
                                                                                                        French, German, Spanish,
                     BACK
       position                    OSD picture by VOL-/VOL.
                                                                                 ITALY
                                                                                                        Chinese 1, Russia, Italian
                           PAL I                                                          PAL I




14                                                                                                                                     15
                     RESET                                                                RESET
                     VOLUME                                                               VOLUME
     Reset all the   MUTE                 This function help to reset                     MUTE
                                                                                          AUTO START      Adjust the screen size
      function
                     AUTO START
                                          all the OSD menu .               Panel Adjust   AUTO CLOSE
                     AUTO CLOSE
                     PANEL ADJUST                                                         PANEL ADJUST
                                                                                          BACK
                                                                                                          between 4:3/16:9
                     BACK
                                                                                                  4 :3

                           PAL I                                                                PAL I




                     RESET                1 . E n t e r t h e Vo l u m e
                     VOLUME
     Adjust the      MUTE
                     AUTO START
                                          adjustment menu                      Exit                       Exit the current menu.
      Volume         AUTO CLOSE
                     PANEL ADJUST         2. Adjust the volume by
                     BACK
                                          VOL-/VOL
                           PAL I                                                                  PAL I




                     RESET
                     VOLUME
                                          This function can help to
         Mute        MUTE
                     AUTO START
                                          cancel the sound .
       function      AUTO CLOSE
                     PANEL ADJUST         Use VOL-/VOL can resume
                     BACK
                         ON         OFF   the sound.
                           PAL I




                     RESET
                     VOLUME
                     MUTE

     Auto Start      AUTO START
                     AUTO CLOSE           Set a time to Auto start.
                     PANEL ADJUST
                     BACK
                           - 0 +
                           PAL I




                     RESET
                     VOLUME
                     MUTE
                     AUTO START
     Auto Close      AUTO CLOSE
                     PANEL ADJUST
                                          Set a time to Auto close.
                     BACK
                           - 0 +
                           PAL I




16                                                                                                                                 17
     V. TROUBLE SHOOTING                                          VI. SPECIFICATION

        PROBLEMS                POSSIBLE    REASONS               SPECIFICATION             32" LCD TV 26" LCD TV 22"LCD TV 19" LCD TV 17" LCD TV 15" LCD TV 10.4" LCD TV


                         MAKE SURE THE POWER IS ON AND BE         Resolution                 1366*768   1366*768    1680*1050   1440*900    1440*900    1280*800     800*600
                         CONNECTED CORRECTLY
                                                                  Displayable Colours         16.7M      16.7M       16.7M       16.7M       16.7M       16.7M       16.7M
                         MAKE SURE THE USING TV SYSTEM IS RIGHT

                         MAKE SURE ALL THE INPUTS ARE             Contrast Ratio              1200:1     1200:1       500:1       800:1       450:1       450:1       250:2
        NO SOUND
                         CONNECTED CORRECTLY
        AND PICTURE
                                                                                  2
                                                                  Brightness (cd/m)            500         500         800         450         500         450         300
                         THE CHANNEL SELECTION IS NOT DONE
                         PROPERLY                                                            176/176     176/176     176/177     160/160     160/160     150/150     150/151
                                                                  Viewing Angle (H / V)
                         RESETTING THE CHANNELS

                         THE VOLUME IS TURNED OFF.                Colour System             PAL/NTSC    PAL/NTSC    PAL/NTSC    PAL/NTSC    PAL/NTSC    PAL/NTSC    PAL/NTSC

                         THE ANTENNA IS NOT CONNECTED
      POOR RECEPTION                                              Built-in Speaker            5W*2        5W*2        5W*2        2W*2        2W*2        2W*2        2W*2
                         PROPERLY
                         THE BRIGHTNESS AND CONTRAST ARE NOT      Power Supply               110~240V   110~241V    110~242V    110~242V    110~243V    110~244V    110~245V
      DARK PICTURE       ADJUSTED PROPERLY.
      PUNCH-DRUNK OR     THE ANTENNA IS NOT ADJUSTED PROPERLY.    PowerConsumption Max        135W        135W        85W         45W         45W         45W         35W

      UNSTABLE PICTURE   THE COLOR IS NOT PROPERLY
                                                                  Stand-by                      10W        10W         10W         10W         10W         10W         10W
                         THE TV MAY BE RECEIVING ELECTRONICS
      DISTURB SUCH AS
                         OR ELECTRO MAGNETIC
      SNOWFLAKE                                                   INPUT TERMINALS
                         INTERFERENCE.FROM OTHER EQUIMENT
                         THE COLOR IS NOT PROPERLY ADJUSTED.                                   yes         yes         yes         yes         yes         yes         yes
      POOR COLOR                                                  Antenna Input
                         THE SIGNAL IS TOO WEAK.
      IMAGE IS NOT                                                                             yes         yes         yes         yes         yes         yes         yes
                                                                  Composite Video Input
      STABLE AND         CHECK THE DISPLAY RESOLUTION AND
      MAY APPEAR         FREQUENCY
                                                                  S-Video Input                yes         yes         yes         yes         Yes         Yes         Yes
      TO VIBRATE
      HORIZONTAL                                                                               yes         yes         yes         yes         Yes         Yes         Yes
                         ADJUST THE AUTO                          Audio Input (for Video)
      NOISE ON THE       ADJUST THE PHASE
      IMAGE                                                                                    yes         yes         yes         yes         yes         yes         yes
                                                                  Audio Output
      VERTICAL BARS
                         ADJUST THE AUTO
      OR STRIPES ON      ADJUST THE CLOCK                                                    optional    optional    optional    optional    optional    optional    optional
                                                                  VGA Input
      THE IMAGE
      NO EFFECT WHEN
                         MAKE SURE THE BATTERY OF THE REMOTE
      REMOTE
                         CONTROILER IS WORKABLE
      CONTROLLING


18                                                                                                                                                                              19
     VII. DIMENSION OF THE WATERPROOF LCD TV
                                                                        VIII. WARRANTY         CARD

                          A                              E
                                                             Commodity _______________________________
                                                             Product Model _____________________________
                                                             Inspector _________________________________
                                                             Customer Name ____________________________
                          C                                  Contact Tel _______________________________
                                    D           B            Purchasing date ____________________________
                                                             Series No. _________________________________
                                                             Invoice No. ________________________________
                                                             Seller Name & Tel __________________________
                                                             Distributor Name & Tel ______________________
                                                             The product has been proved all functions are
                                                             working correctly before leaving the original
                                                             factory. Please make sure you have followed all the
                                                             safety instructions mentioned in the manual when
         LCD SIZE   A         B     C     D         E        you take this waterproof LCD TV for repairing.
          10.4"     340       253   300   210       37

           15"      463       300   411   249       37                   REPAIR INFORMATION

           17"      517       329   471   284       37
                                                                 DATE      CONDITION   REPAIRMAN     REMARK

           19"      554       360   506   311       37

           22"      700       420   634   354       37

           26"      885       547   578   447       60

           32"      1037      637   937   537       68




20                                                                                                                 21

								
To top