SANYO 32KS52 manual

Document Sample
SANYO 32KS52 manual Powered By Docstoc
					 INSTRUCTION MANUAL                       LCD-32R45F

  High Definition LCD TV




               Help line: 1-800-263-2244
               Monday to Friday 9 am to 5 pm (Eastern)
               http://ca.sanyo.com
                                                      Table of Contents

Important Safety Instructions...........................................................................................................3

Important Notice ..............................................................................................................................5

Preparations ......................................................................................................................................6

Identification of Controls.................................................................................................................9

Connections .....................................................................................................................................11

Turning on your TV for the first time ............................................................................................15

Basic Operations .............................................................................................................................16

Adjusting PICTURE Menu Options ................................................................................................20

Adjusting AUDIO Menu Options ...................................................................................................22

Adjusting SETUP Menu Options ...................................................................................................23

   Parental Controls.........................................................................................................................24

   Closed Caption ............................................................................................................................27

   Time & Menu Settings .................................................................................................................28

   Input Label/Restore Default/Audio Only ....................................................................................29

Adjusting CHANNEL Menu Options .............................................................................................30

Image Adjustments for VGA (PC) Mode........................................................................................32

Troubleshooting...............................................................................................................................33

Specifications...................................................................................................................................34

Warranty .........................................................................................................................................35




                                                                         2
          Thank you for choosing SANYO. Please read all
     instructions to obtain maximum benefit of your product.
                        CAUTION                                    THIS SYMBOL INDICATES THAT DANGEROUS
                                                                   VOLTAGE CONSTITUTING A RISK OF ELECTRIC
        RISK OF ELECTRIC SHOCK DO NOT OPEN                         SHOCK IS PRESENT WITH THIS UNIT.

     CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,               T H I S S Y M B O L I N D I C AT E S T H AT T H E R E A R E
     DO NOT REMOVE COVER (OR BACK). NO USER-                       I M P O RTA N T O P E R AT I N G A N D M A I N T E N A N C E
     SERVICEABLE PARTS INSIDE. REFER SERVICING TO                  INSTRUCTIONS IN THE OWNER’S MANUAL WITH
     QUALIFIED SERVICE PERSONNEL.                                  THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
                     IMPORTANT SAFETY INSTRUCTIONS
1.  Read these instructions.                                              vicinity of overhead power lines or other electrical light or
2.  Keep these instructions.                                              power circuits or where it can fall into such power lines
3.  Heed all warnings.                                                    or circuits. When installing an outside antenna system,
4.  Follow all instructions.                                              extreme care should be taken to keep from touching such
5.  Do not use this apparatus near water.                                 power lines or circuits as contact with them might be fatal.
6.  Clean only with a dry cloth.                                       EXAMPLE OF ANTENNA GROUNDING ACCORDING
7.  Do not block any ventilation openings. Install in                  TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
    accordance with the manufacturer's instructions.
                                                                                                                   ANTENNA LEAD IN WIRE
8. Do not install near any heat sources such as radiators,
    heat registers, stoves or other apparatus (including                                                           ANTENNA DISCHARGE UNIT
    amplifiers) that produce heat.                                                    GROUND CLAMP                 (NEC SECTION 810-20)

9. Do not defeat the safety purpose of the polarized or
                                                                                                                   GROUNDING CONDUCTORS
    grounding- type plug. A polarized plug has two blades                                                          (NEC SECTION 810-21)
    with one wider than the other. A grounding type plug
    has two blades and a third grounding prong. The wide                                                        POWER SERVICE GROUNDING
                                                                                 GROUND CLAMPS                  ELECTRODE SYSTEM
    blade or the third prong are provided for your safety. If                                                   NEC ART 250, PART H)
                                                                       NEC- NATIONAL ELECTRICAL CODE
    the provided plug does not fit into your outlet, consult an
    electrician for replacement of the obsolete outlet.                ” Note to CATV system installer:
10.Protect the power cord from being walked on                         This reminder is provided to call the CATV system installer's
    or pinched, particularly at plugs, convenience                     attention to Article 820-40 of the NEC that provides guidelines
    receptacles, and at the point where they exit from                 for proper grounding and, in particular, specifies that the
    the apparatus.                                                     cable ground shall be connected to the grounding system of
11. Only use the attachments/accessories specified by the              the building, as close to the point of cable entry as practical.
    manufacturer.                                                      17. Wall or Ceiling Mounting - The product should be
12. Use only with the cart, stand, tripod, bracket or table                mounted to a wall or ceiling only as recommended
    specified by the manufacturer or sold                                  by the manufacturer and listed by an independent
    with the apparatus. When a cart is used,                               laboratory (such as UL).
    use caution when moving the cart/                                  18. “Apparatus shall not be exposed to dripping or splashing
    appliance combination to avoid injury                                  and no objects filled with liquides, such as vases, shall
    from tip-over.                                                         be placed on the apparatus.”
13. Unplug this apparatus during lightning                             19. When the MAINS plug is used as the disconnect device,
    storms or when unused for long periods of time.                        the disconnect device shall remain readily operable.
14. Refer all servicing to qualified service personnel.                20. Install the LCD TV in a proper position. If not, it may
    Servicing is required when the appliance has been                      result in a fire hazard.
    damaged in any way, such as when a power-supply                    21. Provide appropriate space on the top, sides and rear
    cord or plug is damaged, liquid has been spilled or                    of the LCD TV cabinet for allowing air circulation and
    objects have fallen into apparatus, the apparatus has                  cooling the LCD TV.
    been exposed to rain or moisture, does not operate                 22. Minimum clearance must be maintained. If the LCD TV
    normally or has been dropped.                                          is to be built into a compartment or similarly enclosed,
15. If an outside antenna is connected to the television                   the minimum distances must be maintained. Do not
    equipment, be sure the antenna system is grounded so                   cover the ventilation slot on the LCD TV. Heat build-up
    as to provide some protection against voltage surges and               can reduce the service life of your LCD TV, and can also
    built up static charges. In the U.S. Selection 810-21 of the           be dangerous.
    National Electrical Code provides information with respect
    to proper grounding of the mast and supporting structure,
    grounding of the lead-in wire to an antenna discharge unit,
    size of grounding conductors, location of antenna discharge
    unit, connection to grounding electrodes, and requirements
    for the grounding electrodes.
16. An outside antenna system should not be located in the

                                                                       3
ENERGY STAR® USER INFORMATION
ENERGY STAR User Information Statement: the factory default settings of this television meet
ENERGY STAR requirements. Changing Picture Settings may increase energy consumption,
possibly beyond the limits required for ENERGY STAR qualification.
To ensure your television is operating at an optimal energy efficiency, select default picture mode.

TRADEMARKS
                         Manufactured under license from Dolby Laboratories.
                         “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
                         HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
                         or registered trademarks of HDMI Licensing LLC in the United States and
                         other countries.

                         “As an Energy Star® Partner, Sanyo Electric co., Ltd. has determined that this
                         product meets the Energy Star® guidelines for energy efficiency.”


                         This symbol on the nameplate means the product is Listed by Underwriters’
                         Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
                         standards against risk of fire, casualty and electrical hazards.




PROTECTING THE LCD SCREEN                                    HANDLING PRECAUTIONS
The screen can be damaged if it is not maintained        Handle by the cabinet only. Never touch the screen
properly. Do not use hard objects such as hard           when handling.
cloth or paper. Do not use excessive pressure when       Excessive pressure on the screen can cause
cleaning the screen; excessive pressure can cause        permanent discoloration or dark spots.
permanent discoloration or dark                          Handling damage is not covered under warranty.
spots.
NEVER spray liquids on the                                   CONTAINS MERCURY LAMPS,
screen.                                                      DISPOSE OF PROPERLY




                                                     4
Important Notice

                    Do not use in hot and cold rooms (locations)
About Temperature
                    ! When the unit is used in rooms (locations) with low temperature, the picture may
                      leave trails or appear slightly delayed. This is not a malfunction, and the unit will
                      recover when the temperature returns to normal.
                    ! Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
                      exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
                      and the screen to malfunction.
                    ! Storage temperature: 0°C to 50°C
                    ! Working temperature: 5°C to 40°C

                    The extended use of fixed image program material can cause a permanent after-image
About After-Image   on the screen.
                    This background image is viewable on normal programs in the form of a stationary fixed
                    image. This type of irreversible screen deterioration can be limited by observing the
                    following steps:
                    A. Reduce the brightness/contrast setting to a minimum viewing level.
                    B. Do not display the fixed image for extended periods of time.
                    C. Turn the power off when not in actual use.
                    Important Information Regarding Use of Video Games, Computers,
                    Captions or Other Fixed Image Displays.
                    ! Do not allow a still picture to be displayed for an extended period, as this can cause a
                      permanent after-image to remain on the screen.
                      Examples of still pictures include logos, video games, computer images, teletext and
                      images displayed in 4:3 mode.
                    CAUTIONS:
                    ! The permanent after-image on the screen resulting from fixed image use is not an
                      operating defect and as such is not covered by the warranty.
                    ! This product is not designed to display fixed images for extended periods of time.
                      Do not let images display in 4:3 mode for extended periods of time.


                    To clean this unit, wipe with a soft, dry cloth.
Cleaning and        If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or
Maintenance         a weak detergent solution.
                    ! Use eyeglass cleaner to remove stubborn dirt from the screen.
                    ! Never use alcohol, paint thinner or benzine to clean this unit.
                    ! Before using a chemically treated cloth, read the instructions that came with the
                        cloth carefully.




                                            5
Preparations

Assembling the Stand

 If the stand is provided, please read these instructions thoroughly before attempting this installation.
 You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to
 mount your TV on a wall or other vertical surface, you must remove the stand column.


 Cautions:
 Make sure that you handle your TV very carefully when attempting assembly or removal of the stand. If you are not sure
 of your ability to do this, or of your ability to use the tools necessary to complete this job, refer to a professional installer or
 service personnel. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or
 improper assembly.
 When using a table or bench as an aid to assembly, make sure that you put down a soft cushion or covering to prevent
 accidental scratching or damage to your TV's finish.
 The speaker is not intended to support the weight of your TV. Do not move or handle your TV by the speaker. This can
 cause damage to your TV that is not covered by the manufacturer's warranty.
 Before attempting assembly or removal of the stand, unplug the AC power cord.


Installing the stand
                                                              To install the stand:
                                                                 1. Remove the stand from the box and place it on a table or
                                                                    bench.

                                                                   You must pay attention to the direction of the stand. The
                                                                   wide portion of the stand should go towards the front of
                                                                   the TV.

                                                                 2. Lay your TV flat (screen down) on the edge of a table or
                                                                    bench. Make sure that you put down a soft cushion or cloth
                                                 Locators           so that your TV is not scratched.

                                                                 3. Put the stand close to the TV back, align the stand with the
                                  es
                              ho l                                  TV by moving the stand steadily until the Stand Locators
                         ew
                      Scr                                           align with the locating grooves on the stand column. And
                                       Stand                        align the screw holes on the TV back with the holes in the
                                                                    stand column, then secure the stand to the TV with
                                               Secure with          provided screws .
                                               four screws



                                                                   To remove the stand from the TV, perform these
                                                                   steps in reverse order.



 NOTE:
 The appearance of this product in these illustrations may differ from your actual product, and is for
 comparative purposes only.




                                                                  6
Preparations (Continued)

Using the Remote Control

Use the remote control by pointing it towards the remote sensor window of the
<
  set. Objects between the remote control and sensor window may prevent proper
  operation.


                                                                                                            30   30


                                                                                                             5m




Cautions regarding use of remote control
Do not expose the remote control to shock. In addition, do not expose the remote
<
control to liquids, and do not place in an area with high humidity.
Do not install
< or place the remote control under direct sunlight. The heat may cause deformation of the unit.
The remote
< control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong
lighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remote
sensor window.



Installing the Batteries

 If the remote control fails to operate the TV functions, replace the batteries in the remote control.

       1 Open the battery cover.

      2   Insert two size-AAA batteries.
            (Place the
          < batteries with their terminals corresponding to the (+)
             and (–) indications in the battery compartment.)

      3   Replace the cover.



 Precaution on battery use
 ! Dispose of batteries in a designated disposal area.
 ! Batteries should always be disposed of with the environment in mind. Always recycle or dispose of batteries in accordance
   with applicable laws and regulations.
 ! Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
 1. Place batteries with their terminals corresponding to the (+) and (–) indications.
 2. Different types of batteries have different characteristics. Do not mix batteries of different types.
 3. Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries
   to leak chemicals.
 4. Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is
   found, wipe with a cloth.
 5. If the remote control is not used for an extended period of time, remove the batteries from the remote control.
 6. The batteries (battery pack of batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.



                                                                     7
Preparations (Continued)
Antenna Connection

 INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
 screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
 Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
 The exact type and position of the antenna will depend upon your particular area.




                                                      TV REAR




       Wall Antenna Socket
                                                 RF Coaxial Cable(75 ohm)




 Note:
 =It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
  conditions.
  The antenna
 = cable should not be bundled with the power cord and the like.
  If the antenna
 = is not installed properly, contact your dealer for assistance.




Power Connection

 Connect the power cord to the AC IN jack, then plug the other end into a power outlet.


     Household
    power outlet
                   Plug into AC outlet.
                                                 AC cord                       AC IN




 Note:
 This illustration is for reference only. The AC plug may be different on different models.
 =
 This product
 = should be operated only from the type of power source indicated on the marking label.
 Always unplug
 = the AC cord from power outlet when not using for a long period of time.


                                                               8
Identification of Controls
Main Unit (front view/back view)

 Main Unit (front view)                                                                                                                     1. Remote sensor
                                                                                                                                                      Receives signals from the remote control. Do not block.
                                                                                                                                            2. Power indicator
                                                                                                                                                      Lights blue when in operating mode.
                                                                                                                                               Lights red when in standby mode.
                                                                                                                                            3. POWER
                                                                                                                                               Touch this icon to turn the unit ON from STANDBY mode. Touch it
                                                                 INPUT   MENU        CH   VOL

                                                                                                                                               again to turn the set back to STANDBY.
                                                                                                                                            4. INPUT
                  12
                                                                                                                                               To access INPUT SOURCE menu
                       INPUT        MENU               CH                                  VOL +
                                                                                                                                            5. MENU
                                                                                                                                              Touch this icon to access the main menu screen.
             3             4         5                 6                                        7
                                                                                                                                                                      ^
                                                                                                                                            6. CH^/
        Note: Icons on the TV control panel (CH^/ ,
                                                                                                    ^                                          Touch these two icons to directly change the TV channel;
        VOL+/-, MENU, INPUT, POWER ) are touch                                                                                                 In menu operations, these sensors serve as up/down buttons.
        sensors. First touch of the icon will illuminate it.                                                                                7. VOL+/–
        Second touch will fulfill its function. Touching
        the icons needs to be quickly done before                                                                                              Touch the VOL+ or VOL– icon to directly increase or decrease the
        the illumination disappears.                                                                                                           sound volume level;
                                                                                                                                               In menu operations, these sensors serve as right/left buttons.

 Main Unit (back view)                                                                                                                                                1. SERVICE PORT: For software updates only. Do not use.
                                                                                                                                                                      2. Headphone: Connect headphones to this jack.
                                                                                                                                                                      3. HDMI3: Connect an HDMI device to this jack.
                                                                                                                  SERVICE PORT




                                                                                                                                                      1
                                                                                                                                                      2               4. AV2/S-VIDEO2 IN: Connect an AV device to these
                                                                                                                                                                      jacks.
                                                                                                                 HDMI3




                                                                                                                                                      3
             AC IN

 5                                                                                                                                                                    5. AC IN: Plug the power cord into this jack and into a
                                                                                                             R
                                                                                                             AUDIO




                                                                                                                                                                      power outlet.
                                                                                                             L
                                                                                                    AV2 IN




                                                                                                                                                      4
                                                                                                             VIDEO




                                                                                                                                                                      6. DIGITAL OUTPUT: Connect a digital sound system to
                                                                                                             S-VIDEO2




                                                                                                                                                                      this jack.
                                                                                                                                                                      7. HDMI1 and HDMI2: Connect an HDMI device to this
                                                 VGA
                                                            PB
                                                            PB
                                                                                PR
                                                                                PR
                                                                                                                                          AUDIO OUT   ANT/ CABLE IN
                                                                                                                                                          S-VIDEO1
                                                                                                                                                                      jack.
 DIGITAL OUTPUT   HDMI 2   HDMI 1        PC IN              COMPONENT IN                                                         AV1 IN


                                                                                                                                                                      8. PC IN VGA/AUDIO: Connect a computer to these
                                                                                                                                                                      jacks.
                                                                                                                                                                      9. COMPONENT1 and COMPONENT2 IN: Connect
                                                                                                                                                                      component video devices to these jacks.
        6              7                 8                               9                                                       10           11 12 13
                                                                                                                                                                      10. AV1 IN: Connect an AV device to these jacks.
                                                                                                                                                                      11. AUDIO OUT: Connect an audio amplifier to these
                                                                                                                                                                      jacks.
                                                                                                                                                                      12. ANT/CABLE IN: Connect an antenna or cable TV to
                                                                                                                                                                      this jack.
                                                                                                                                                                      13. S-VIDEO1 IN: Connect an S-Video device to this jack,
                                                                                                                                                                      then connect an audio cable to the AV1 IN audio jacks.


                                                                                                                                                                      9
Identification of Controls (Continued)
Remote Control Unit

                                                       1 POWER         : Switches the TV power on or Standby.
                                                       2 HDMI: Press repeatedly to cycle between HDMI inputs.
                                                       3 VIDEO: Press repeatedly to cycle between AV and S-Video
                                                           inputs.
                                TV    INPUT       14
    1                                             15   4 PICTURE: Selects picture mode.
    2
         VIDEO    HDMI      COMP       VGA        16   5 AUDIO: Selects sound mode.
    3                                             17
        PICTURE   AUDIO MTS/SAP        CCD
                                                       6 MENU: Displays the main menu screen.
    4                                             18   7 5/3 Menu navigation buttons.
                                                         /6 /ENTER:
                                                           /4
    5    MENU                           EXIT      19
    6                                             20       5move up or down in the menu.
                                                            : Press to
                                                           /6
                                                           3 move left or right in the menu or to adjust a
                                                            /4 : Press to
   7                ENTER                                  menu setting.
        GUIDE                           CH-LIST
                                                           ENTER: Press to confirm a selection and/or enter into a sub-
    8                                             21       menu.
                                                        8 GUIDE: Press to display the program guide information (if
           1             2            3                    available) when watching a DTV program. You may be able to
                                                           view program broadcasting time and program name from the
           4             5            6                    guide.
    9
                                                        9 0 – 9 number buttons: Press to enter channel numbers or
           7             8            9                    input password.
   10       .            0           RECALL       22   10 Dot ( )button: Press to enter a program number for multiple
                                                  23       program channels such as 2.1, or 2.2.
                         INFO                          11 CH / : Changes channel up and down.
   11       CH        MUTE           VOL          24   12 ZOOM: Selects the screen size.
                                                       13 SLEEP: Sets the sleep timer.
                                                  25
                                                       14 TV: Press to select TV.
          ZOOM    SLEEP FAVORITE                       15 INPUT: Displays input source menu.
   12                                             26   16 COMP: Press repeatedly to cycle between Component inputs.
   13
                                                       17 VGA: Press to view a computer connected to your TV.
                                                       18 CCD: Press to turn closed captioning on or off.
                                                       19 MTS/SAP: To select STEREO, SAP or MONO sound in analog
                                                           TV mode. To select audio track in DTV mode.
                                                       20 EXIT: Press to exit the menu.
                                                       21 CH-LIST: Displays a channel list.
                                                       22 RECALL: Recalls the last viewed channel.
                                                       23 INFO: Press to display the information banner.
                                                       24 VOL+/-: Increases or decreases the volume.
                                                       25 MUTE: Mutes the sound.
                                                       26 FAVORITE: Displays the favorite program list.



                                                             10
Connections
Cautions Before Connecting

   Carefully check the terminals for position and type before making any connections.
   The illustration of the external equipment may be different depending on your model.
   Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their
   terminals.
   Refer to the operating manual of the external device as well.
   When connecting an external device, turn the power off to avoid any issues.


Connecting a VCR




             TV REAR

                                                                                                    VCR


                                                                                                     S-VIDEO




       Cables are often color-coded
       to connectors. Connect red to
       red, white to white, etc.                                                 AV cable

                                                                                 S-VIDEO
                                                                                  cable




 How to connect:
 Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
 Note: For better video, you can use the S-video terminal if your source supports it.

 To play VCR
 1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
 2. Press 5 AV1or S-Video1, then press ENTER to confirm.
            or6  to select
    (Or you can press VIDEO button one or more times to select directly. )
 3. Turn on your VCR , insert a videotape and press the Play button.


 Note:
  AV1 and
 · S-Video1 connection share the same audio jacks.




                                                            11
Connections (Continued)
Connecting a Camcorder
                                                                                            Camcorder   “PlayStation”
                                                    Cables are often color-coded
                                                    to connectors. Connect red to
                                     SERVICE PORT
                                                    red, white to white, etc.
                                    HDMI3
                                                                                                        or


         TV Side
                                R
                                AUDIO
                                L
                       AV2 IN




                                                                  AV cable
                                VIDEO
                                S-VIDEO2




 How to connect:
 Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.

 To playback Camcorder
  1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
  2. Press 5 AV2, then press ENTER to confirm.
              or6  to select
     (Or you just press VIDEO button twice to go to AV2 mode directly.)
  3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
  4. Insert the tape into the camcorder and press Play button.


  Note:
  The operations of the camcorder may be different and is dependant on your model. Please read the user manual of your
  camcorder to confirm operation.



Connecting an Audio Amplifier

                                                                                                  Audio System
                                                                  TV REAR
                                                                Cables are often color-
                                                                coded to connectors.
                                                                Connect red to red, white
                                                                to white.



                                                                             AV cable

 To improve sound quality, you may connect your audio system to this TV’s audio output jacks to enjoy a high-quality sound
 from the audio system.
  How to connect:
 Connect the Audio cables between the Audio (L/R) jacks on the unit and Audio System.
  To play audio system
  1. Turn on your TV, select a program.
  2. Turn on your audio system, and adjust the volume and other audio settings through your audio system.




                                                                              12
Connections (Continued)

Connecting an HDMI device


                                        TV REAR




                                                                                   Device with HDMI output



                                               HDMI cable

  How to connect a device using HDMI Connection:
  Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device.

  To play from the device using HDMI:
  1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
  2. Press 5 HDMI 1, then press ENTER to confirm.
             or6  to select
    (Or you just press HDMI button to select directly.)
  3. Turn on your device and set it to the correct mode. See the device’s user guide for more information.
  Note:
  ! If HDMI2 interface is used, please select HDMI2 mode. If HDMI3 interface is used, then select HDMI3 mode correspondingly.
  ! If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio
    cable to the VGA AUDIO IN jack on the TV rear.




Connecting a Computer



                                        TV REAR




                                     D-Sub cable                                 To monitor port
                                    (analog RGB)                                 (15-pin D-Sub)


                                                                            Audio cable        To audio output jack
                                                                         (stereo mini plugs)
  How to connect:
  Connect a VGA cable between the VGA jack on the computer and the VGA input jack on the unit.
  Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit.

  To play video from a computer
  1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
             or6  to select
  2. Press5 VGA, then press ENTER to confirm.
     (Or you just press VGA button to select directly.)
  3. Turn on your computer, and adjust the display properties as required.


                                                               13
Connections (Continued)
Connecting Component Video


                                                                    Device with component video
                                            TV REAR




                                                                                     Cables are often color-coded
                      Audio cable                                                    to connectors. Connect red to
                                                                                     red, white to white, etc.
             Component video cable
 To connect a device using component video:
 Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks
 on the device .
 Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device.

 To play component video from an external device:
 1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
 2. Press 5 Component1 (or Component2), then press ENTER to confirm.
            or6  to select
    (Or you can press COMP button on the remote control to go to Component1 mode directly. Press the COMP button
    once again to go to Component2 mode.)
 3. Turn on your external device and set it to the correct mode. See the device’s user guide for more information.


Connecting Headphones
                                                                                                     SERVICE PORT




 Insert the plug of the headphone into the TV’s Headphone jack.
 When using headphones, adjust the headphone volume so as to avoid excessive
 levels, as hearing damage may result.
                                                                                                R   HDMI3
                                                                                                AUDIO
                                                                                                L
                                                                                       AV2 IN




                                                                                                                               Headphones
                                                                                                VIDEO
                                                                                                S-VIDEO2




                                                                                    TV Side


Connecting Digital Optical Audio

                                    For a full Home Theater sound experience,
                                    you must connect your Hi-Fi or Audio                                            Audio Processor
                                    processor to the DIGITAL OUTPUT(Optical)
                                    terminal on the TV rear.

                                                                                                                          or
           TV REAR                                                     S/PDIF IN
                                                                       (Optical)
                                              Optical audio cable


                                                                                                                      HIFi System
     Note: The DIGITAL OUTPUT jack only works with digital TV channels.
                                                          14
Turning on your TV for the first time
Running initial setup                                                                        Setup Wizard
                                                                                        Choose your Picture Mode
1 Make sure that you have inserted the batteries in the                                            Home Mode
  remote control, connected the antenna to the TV, and                                             Store Mode
  connected the AC power.                                                         “Home mode” qualifies for ENERGY STAR,
                                                                                  “Store mode” is for the retail display setup.

2 Press      (Power), then wait several seconds. The initial                                                                        Next
    Setup Wizard screen opens (only the first time you                           Move          Select    ENTER   Next       MENU   Previous

    turn on your TV).
                                                                                or 5
                                                                        9 Press 6select Home Mode (qualifies for
                                                                                   to
                     Setup Wizard                                         ENERGY STAR) or Store Mode (for the retail display
                                                                          setup), then press ENTER.
                 Choose your menu language
                                                                          If you select Home Mode, the Choose your TV source
                               English                                    screen opens.
                               Français                                   If you select Store Mode, a message stating “Are you sure you
                                                                          want Store mode? Since in this mode Energy saving is not
                               Español
                                                                          realized” appears. Select Yes to proceed or No to exit.
                                                         Next

          Move        Select      ENTER   Next   MENU   Previous
                                                                                             Setup Wizard
                                                                                         Choose your TV source
           or 5
3 Press 6 the menu language you want,
                to select                                                         Antenna                RF CH :        0
  then press ENTER. The Time screen opens.                                        Cable                   0      Digital Channels

                                                                                  Cable/Satellite Box     0      Analog Channels
                     Setup Wizard                                           Scan for channels
                               Time
        Time Zone                  Pacific
        DST                          Off                                         Move          Select    ENTER   Next       MENU   Previous
        Mode                        Auto
        Year                                                                     or 5
                                                                        10 Press 6 select Antenna, Cable, or
                                                                                    to
                                    2010
        Month                         03
        Day                           15
                                                                     Cable/Satellite Box, depending on the type of
        Time                     09 : 05 AM                          connection you have.
                                                    Next
                                                                     . If you are using an antenna for a standard or HD TV signal,
           Move         Select    ENTERNext        Previous
                                                 MENU
                                                                       select Antenna.
                                                                     . If your cable is connected directly to the TV (without a
4   Press 6   or 5 Time Zone, press 3
                    to highlight                               to
                                                            or4 tuner box), select Cable.
    select your time zone. Pacific, Alaska, Hawaii,
                                                                     . If your cable is connected to your TV through a tuner box,
    Atlantic, Eastern, Central, Mountain can be
                                                                       select Cable/Satellite Box.
    selected.
                                                                  11 Press ENTER when you have made your selection. The
5   If your viewing area observes daylight savings time,             channel scan screen opens.
    press 5     or 6DST, then press 3 If you selected Antenna or Cable, your TV automatically
                      to highlight                             to
                                                             or4
    select On.                                                       scans for available channels in your area and stores the
                                                                     channel information in the channel list. This may take several
6   Press 5    or 6  to highlight Mode, then press 3 minutes. While scanning, the TV displays a progress report.
                                                               to
                                                             or4
    select Manual (to set the date/time manually), or Auto           – OR –
    (the date/time are automatically set by the TV signal            If you selected Cable/Satellite Box, the auto scan is not
    source, based on the time zone you selected).                    necessary and the screen will ask you to select the correct
                                                                     input source for your set top box. Press EXIT to close the
                                                                     menu.
7   If you select Manual mode, make the settings as
                                                                     Notes:
    follows:
                                                                     . During auto scan, digital programs will be scanned first, then
    . Press 5    or 6Year, Month, or Day, then
                       to highlight                                    analog programs. When all available digital programs have
      press 3 the setting.
                or4 to adjust                                          been searched, the screen will ask you to “Press MENU or
                                                                       EXIT if you don’t need analog channel scan.” At this point you
    . Set the time by pressing 5          or 6Time,
                                                to highlight           can press EXIT to exit the analog channel scan, or just ignore
      then press 3     or4 the hour, minute, or
                               to highlight                            it and the TV will go on scanning.
                                 or 6
      AM/PM field. Press 5 the setting. to adjust                    . Channel scan can take up to 30+ minutes.
                                                                     You can press EXIT at any time to stop the auto scan, but you
8   After the above setting, press ENTER and the Choose              will need to run the auto scan again to create a channel list.
    your Picture Mode screen opens.
                                                                  12 Select the corresponding video input source through the
                                                                     INPUT SOURCE menu.
                                                                   15
Basic Operations
Turning On/Off the Power
 1   Plug the power cord into an AC power outlet.
 2   Press the Power button. Your TV turns on.
 3   Press    again to turn off your TV. When you turn off your TV, it goes into standby mode.

     Warning: When the TV is in standby mode, power is still flowing into the TV. To completely disconnect power, unplug the power
     cord.

     Note: If there is no signal input for a certain time, the TV will auto go to standby mode.


Selecting the Input Signal Source
1     Press INPUT button.

2            or 5
      Press 6 the input source. Options include:
                 to select                                                                                                  INPUT SOURCE
      ! TV — Watch the TV signal.
                                                                                                                                TV
      ! AV1 — Watch the signal from the AV 1 input terminals.
                                                                                                                               AV1
      ! AV2 — Watch the signal from the AV 2 input terminals.                                                                  AV2
      ! S-Video1 — Watch the signal from the S-VIDEO1 input terminal.                                                        S-Video1
      ! S-Video2 — Watch the signal from the S-VIDEO2 input terminal.                                                        S-Video2
                                                                                                                            Component1
      ! Component1 — Watch the signal from the COMPONENT 1 input terminals.                                                 Component2
      ! Component2 — Watch the signal from the COMPONENT 2 input terminals.                                                   HDMI1
      ! HDMI1 — Watch the signal from the HDMI 1 input jack.                                                                  HDMI2
      ! HDMI2 — Watch the signal from the HDMI 2 input jack.                                                                  HDMI3
                                                                                                                               VGA
      ! HDMI3 — Watch the signal from the HDMI 3 input jack.
      ! VGA — Watch the signal from the VGA jack.
3     Press ENTER button to confirm the selection.

Note:
On the remote control five direct input source select buttons (VIDEO/HDMI/COMP/VGA/TV) are provided.
=VIDEO button: Press repeatedly to cycle between AV and S-Video inputs.
=HDMI button: Press repeatedly to cycle between HDMI inputs.
=COMP button: Press repeatedly to cycle between Component inputs.
= Press to view a computer connected to your TV.
 VGA button:
= Press to select TV.
 TV button:                                                                        Picture Audio     Setup                        Channel
                                                                                           Parental Controls
                                                                                           Time
On-Screen Menu Language Selection                                                          Closed Caption
                                                                                           Menu Settings

 1   Press MENU.                                                                           VGA Settings
                                                                                           Input Label
                                                                                           Restore Default
 2   Press 3 Setup menu, press 6 menu.
             to select
           or4                 to access the                                               Audio Only                       Off
                                                                                                  Select             Move           MENU   Exit

 3         or 6
     Press 5 Menu Settings item, press ENTER to access.
              to select
                                                                                                                        Press ENTER


 4            or 6
     Press 5 Menu Language item, press 3
                    to select
     your desired language.
                                         to select
                                       or4
                                                                                                   Picture   Audio     Setup      Channel
                                                                                           Transparency                     25%

 5   Press EXIT to close the menu.                                                         Menu Language                English




                                                                   16                             Select             Move           MENU    Exit
Basic Operations (Continued)
Main Menu Overview                              (TV mode)       List of main menus to help you with operations
                                                                Picture menu
                                                                Picture Mode
          Picture   Audio     Setup        Channel
                                                                Contrast
   Picture Mode               Custom
                                                                Brightness       (Refer to <Adjusting PICTURE Menu
   Contrast                                                70
   Brightness                                              40   Color             Options> section for details.)
   Color                                                   60   Tint
   Tint                                                    0    Sharpness
   Sharpness                                               50
   Backlight                                               30
                                                                Backlight
   Advanced Video                                               Advanced Video (including Color Temperature, Zoom Mode,
        Select              Move             MENU   Exit        Noise Reduction, Overscan, Adaptive Contrast, DCR,
                                                                Auto Zoom items)
                                                                Audio menu
                                                                Sound Mode
         Picture    Audio     Setup        Channel
                                                                Bass
   Sound Mode                  Custom
                                                                Treble
   Bass                                                    57                    (Refer to <Adjusting AUDIO Menu
   Treble                                                  50   Balance           Options> section for details.)
   Balance                                                 0
   Surround                        Off                          Surround
   AVC                             Off
                                                                AVC
   Digital Output              RAW
   Audio Language             English                           Digital Output
        Select              Move             MENU   Exit        Audio Language


                                                                Setup menu
         Picture    Audio     Setup        Channel              Parental Controls
   Parental Controls                                            Time
   Time                                                         Closed Caption
   Closed Caption                                                                 (Refer to <Adjusting SETUP Menu
                                                                Menu Settings
   Menu Settings                                                                   Options> section for details.)
   VGA Settings                                                 VGA Settings
   Input Label                                                  Input Label
   Restore Default
                                                                Restore Default
   Audio Only                       Off
                                                                Audio Only
        Select              Move             MENU   Exit




                                                                Channel menu
         Picture    Audio     Setup        Channel              TV Source
   TV Source                       Cable                        Auto Scan
   Auto Scan                                                                  (Refer to <Adjusting CHANNEL Menu
                                                                Favorites
   Favorites                                                                   Options> section for details.)
   Show/Hide                                                    Show/Hide
   Channel No.                      2.1                         Channel No.
   Channel Label             WGBH-SD
   DTV Signal:                                  Good
                                                                Channel Label
                                                                DTV Signal
        Select              Move             MENU   Exit




 Note
 = the signal tuned, you may see different menu options on your screen. The above main menus are illustrated under TV
 Depending on
 mode.
 = are not selectable are grayed out. If without special indication, this manual is described under TV mode.
 Menu items that
 = and on-screen displays in this manual are for explanation purposes (some are enlarged, others cropped) and may vary
 The illustrations
 slightly from the actual ones.


                                                                17
Basic Operations (Continued)

Using the OSD menu                              To operate the OSD (on-screen display) menu:
                                                ! Press MENU to call up the OSD main menu.
                                                – The screen will now display Picture menu.
                                                ! Press 3 more times to select menu, press 6
                                                          one or
                                                        or4                                to access.
                                                – Picture, Audio, Setup, Channel menu can be selected.
                                                ! From the menu, press5    6     4
                                                                              3 or adjust. Press ENTER to
                                                                                 to navigate
                                                  confirm an entry or selection.
                                                ! To return to previous menu, press MENU.
                                                ! To close the menu, press EXIT.




Channel Selection
Digital sub-channels
 A digital TV signal transmits more data than an analog signal. This increase in data provides a better picture and sound
 with less static and interference.
 The increased data capacity of a digital signal also lets broadcasters fit several channels into the same bandwidth as an
 analog signal. Broadcasters may use these sub-channels to transmit a variety of information, such as weather forecasts,
 foreign languages, commercials.
 A digital sub-channel is indicated by the main channel number followed by a dot and the sub-channel number. For
 example, 5.1 indicates sub channel 1 of the main channel 5.

You can use the following ways to change channels:
! Press CH or CH to go to the next or previous channel in the memorized channel list.
! To select an analog channel, press the number buttons for the channel you want, then wait for the channel to change or
  press ENTER to immediately change the channel.
! To select a main digital channel, press the number buttons for the main channel, then wait for the channel to change or
  press ENTER to immediately change the channel.
! To select a digital sub-channel, press the number buttons for the main channel, press the dot(.) , then press the number
  button for the sub channel. Wait for the channel to change, or press ENTER to immediately change the channel.
  Note: Button presses must be within three seconds of each other.
! To go to the last channel viewed, press RECALL.
                                                                            or 6
! To select a channel from the memorized channel list, press CH-LIST, press 5 the channel, then press
                                                                               to select
  ENTER.
                                                                             or 6 channel, then press
! To select a favorite channel from the favorite list, press FAVORITE, press 5  to select the
  ENTER.
Note: If the list has more than one page, press 3 through the pages.
                                                  to scroll
                                                or4




                                                           18
Basic Operations (Continued)
Adjusting the Volume
    Using the volume buttons (VOL+ and VOL – )
Press the VOL + or VOL- to increase or decrease the volume.

    Using the Mute
Press the MUTE button to temporarily turn off the sound. To restore the sound, press the MUTE button again.

Displaying the Information Banner
You can press INFO button to display information banner. The information banner will display current program information
such as channel number, or video input source, resolution, etc. To close the banner, press this button again or wait a few
seconds and the banner closes automatically.
In DTV mode, it will display the following information:           In analog TV mode, it will display the following information:
- Channel number and station name                                 - Channel number
- Channel label                                                   - Channel label (if preset)
- Broadcast program name                                          - Signal type
- TV rating                                                       - Audio information (Stereo or SAP or Mono)
- Signal type                                                     - Resolution
- Audio information
- Resolution
- CC mode
- Current time, current program start and end play times

Note:
 Some
lDTV programs’ information banner may not contain all the above information. It will vary depending on the
 broadcaster.


Displaying the DTV Program Guide
In DTV mode, your TV can display a program guide, if available. The guide may show a list of available programs, program
times, and program summaries. The displayed information is provided by the DTV channel.

! Press GUIDE, the program guide opens. If there is additional program information, press this button to display the
  information.
! To close the program guide, press this button or wait a few seconds and the banner closes automatically.




                                                             19
Adjusting PICTURE Menu Options

Adjusting the Picture

                                                                                                    Picture   Audio     Setup   Channel
1    Press MENU and the Picture menu appears, press 6
                                                    to access.
                                                                                             Picture Mode               Custom
                                                                                             Contrast                                           70
                                                                                             Brightness                                         40
2             or 6
     Press 5 items, press 3 the selected items. If
                    to select              or4to adjust                                      Color                                              60
     the selected item has sub-menu, press ENTER to access.                                  Tint                                               0
                                                                                             Sharpness                                          50
                                                                                             Backlight                                          30
                                                                                             Advanced Video
3    Press EXIT to close the menu.
                                                                                                   Select             Move        MENU   Exit




Option                         Description

Picture Mode                   Selects a desired picture mode. You can select from Vivid, Standard, Sports, Theater, Energy Saving and Custom.
                               Vivid: Select for a bright and vivid picture.
                               Standard: Select for a standard picture.
                               Sports: Select for a dynamic picture.
                               Theater: Select for a finely detailed picture.
                               Energy Saving: Select for energy saving, the backlight brightness is decreased.
                               Custom: The picture quality you set.

    Note: To quickly change the picture mode, press the PICTURE button on the remote control repeatedly.

Contrast                       Adjusts image contrast.
Brightness                     Adjusts screen brightness for easier viewing of dark picture such as night scenes and black hair.
Color                          Adjusts color saturation.

Tint                            Adjusts tint for image.

Sharpness                       Adjusts image sharpness and displays a sharp image.

    Advanced Video             Allows you to adjust Color Temperature, Zoom Mode, to turn on/off Noise Reduction, Overscan,
                               Adaptive Contrast, DCR and Auto Zoom. See [Advanced Video Adjustment] section on the
                               following page for more information.




                                                                       20
Adjusting PICTURE Menu Options (Continued)

Advanced Video Adjustment
                                                                                             Picture   Audio     Setup      Channel

1                          or 6
    In Picture menu, press 5 Advanced Video, press ENTER
                              to select                                               Color Temperature
                                                                                      Zoom Mode
                                                                                                                  Cool
                                                                                                                 Wide
    to access.                                                                        Noise Reduction            Middle
                                                                                      Overscan                     Off
2         or 6
    Press 5 items, press 3 the selected items.
             to select     to adjust
                         or4                                                          Adaptive Contrast            Off
                                                                                      DCR                             Off
                                                                                      Auto Zoom                       Off
3   Press EXIT to close the menu.
                                                                                           Select              Move           MENU   Exit



Option                      Description

Color Temperature           Selects one of three color temperature. Sets to Warm to enhance hotter colors such as red, or set to Cool
                            to see less intense colors with more blue. You can select from Warm, Cool and Normal.

Zoom Mode                   You can select the picture aspect ratio (display proportions) according to your video signal type or
                            personal preference. You can select from Auto, Normal, Wide, Zoom and Cinema .
                            Auto (available only when Auto Zoom is set On): Selects the correct aspect ratio automatically.

                            Normal: Selects the correct aspect ratio to match the source’s image.(4:3 to 4:3,16:9 to 16:9)

                            Wide: Displays a full-screen picture. (Note: In D-SUB/HDMI mode, when native resolution is
                            1920x1080 and input resolution is1920 x 1080p, displays an input source without scaling it.)

                            Zoom: Enlarges the picture, the top and bottom portion of the picture may be cropped.

                            Cinema: Stretches the picture at the edges while maintaining a good aspect ratio at the center of
                            the screen.
Note:
!You can press the ZOOM button repeatedly to select a desired aspect ratio.
!Do not let images display in 4:3 mode for extended periods of time, since traces of borders displayed on the left,
 right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
!Depending on different situation, some of the above aspect ratios are not available.

Noise Reduction             Select from Weak/Middle/Strong to reduce noise in the picture, commonly called snow.
                            Select Off to turn off this function.

Overscan                    Select Off to eliminate the 5-8% of picture overscanning that normally occurs on broadcasts and
                            video discs. It is of particular benefit to "gamers" in that none of the image gets lost.

Adaptive Contrast           Select On to optimize the picture display. Picture will become more vivid.

DCR                         Turn this On to activate the Dynamic Backlight Control function. Depending on the signal, the TV
                            automatically adjusts the backlight level, which affects the overall brilliance of the picture.

Auto Zoom                   In TV mode, if Auto Zoom is set to On, one more option (Auto) can be selected from Zoom
                            Mode.




                                                               21
Adjusting AUDIO Menu Options

Adjusting the Sound
                                                                                          Picture    Audio     Setup      Channel

1 Press MENU, and then use 3 Audio, press 6
                             to highlight
                           or4            to access                                 Sound Mode                  Custom
  Audio menu.                                                                       Bass                                                  57
                                                                                    Treble                                                50
                                                                                    Balance                                                0
2 Press 5 items, press 3 the selected items.
        or 6
           to select     to adjust
                       or4                                                          Surround                        Off
                                                                                    AVC                             Off
                                                                                    Digital Output              RAW
3 Press EXIT to close the menu.                                                     Audio Language             English
                                                                                         Select              Move           MENU   Exit



  Option                        Description

  Sound Mode                    Selects a desired sound mode. You can select from Standard, News, Music, Movie and Custom.
                                Standard: Select for normal programs.
                                News: Select for news programs.
                                Music: Select for a music program.
                                Movie: Select for a movie program.
                                Custom: The sound quality you set.
  Note: To quickly change the sound mode, press the AUDIO button repeatedly.
  Bass                          Adjusts Bass (low sounds)
  Treble                        Adjusts Treble (high sounds).
  Balance                       Adjusts volume balance (left and right volumes).
  Surround              Select On to turn on the surround sound effect. The benefits of surround sound are enormous.
                        You can be completely enveloped in sound, just as if you were at a concert hall or cinema.
                        Select Off to turn off surround sound.
  AVC                   Select On to equalize overall volume levels across all channels.
  (auto volume control) Select Off to turn off the auto volume control.

  Digital Output                Use this item to select audio output mode from SPDIF. Select RAW to output audio signal as
  (Only for digital programs) its original format. Select PCM to output audio signal by PCM form (if available).


  Audio Language                Selects an alternate language if the program has more than one language.
  (Only for digital programs)



Stereo/SAP Broadcasts Setup                          (Only for analog programs)

- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program;
  if the station transmits an additional sound signal as well as the original one.
- Stereo or SAP can be selected only when the TV station transmits these signals.
- Mono sound is automatically received if the broadcast is only in Mono.
- Select Mono if you are having difficulty receiving a stereo signal.

Press MTS/SAP button to select a stereo mode. You can select from [MONO], [STEREO] and [SAP].
MONO: Select for mono reception. Use to reduce noise during weak stereo broadcasts.
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to automatically switch the TV to second audio programs when this signal is received.


 Note: In DTV mode, you can press MTS/SAP button to select audio track (if available).




                                                                 22
Adjusting SETUP Menu Options
Accessing the Setup Menu Options
You may change system settings such as Parental controls, timer, closed caption, OSD language, menu transparency, etc. by
making use of Setup menu.

1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.                                       Picture   Audio     Setup      Channel
                                                                                    Parental Controls
                                                                                    Time
                                                                                    Closed Caption
2             or 6
     Press 5 items, press 3 the selected items. If
                    to select              or4to adjust                             Menu Settings
     the selected item has sub-menu, press ENTER to access.                         VGA Settings
                                                                                    Input Label
                                                                                    Restore Default
3    Press EXIT to close the menu.                                                  Audio Only                     Off
                                                                                         Select             Move           MENU   Exit




    Option                 Description
    Parental Controls      Your TV lets you control which programs and movies your children can watch based on
                           industry ratings. To set up Parental controls, see [Setting Parental Controls] section on the
                           following pages.
    Time                   Making use of Time sub-menu to set sleep timer and auto clock which automatically sets the
                           time based on time information from a digital channel. See [Setting Sleep Timer and Auto
                           Clock] section for details.
    Closed Caption         You can make use of Closed Caption sub-menu to turn on/off Closed Caption, to set Closed
                           Caption type, etc. See <Closed Caption> section for more instructions.

    Menu Settings          Lets you set menu transparency and menu language through the menu.
                           See [Menu Settings] section for details.

    VGA Settings           Lets you adjust computer settings such as H-Pos, V-Pos, Clock, Phase, etc. through the menu.
                           See [Adjusting Computer Settings] section for more instructions.

    Input Label            Lets you label a device connected to input jacks to make the device easier to select.
                           See [Labeling an Input Source] section for more instructions.
    Restore Default        Running this function to reset most settings of current source to its default settings by following the
                           on-screen instructions.

                           Lets you turn off the video for a TV broadcast and listen to the audio only.
    Audio Only
                           See [Playing TV Audio Only] section for more instructions.




                                                              23
Adjusting SETUP Menu Options — Parental Controls

Setting Parental Controls
Parental Control enables parents to prevent their children from watching inappropriate material on TV. Parental Control reads
the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals ),
then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be
blocked.
Before you block channels, you need to set a password. The password controls access to the parental control system. To access
any blocked channels, the password is also required.

Setting the Parental Password
1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.

     Select Parental Controls item, then press ENTER to access. Now a
2    password is required to input.

     Press 0 – 9 number buttons to input the password(4-digit, the default
3    password is 0000 and you should change it). Now Parental Controls                    Picture    Audio     Setup      Channel

     menu is opened.                                                                Enter Password                        ____



4    Highlight Change Password item, then press ENTER.


5    Enter the old password using 0 – 9 buttons.


6    Enter the new password using 0 – 9 buttons.

      Enter the same password again to confirm.
7     Now the new password has been created successfully.
 Note:
 ! To avoid forgetting the password, write it down and keep it in the safe place.
 ! There is a super password (9999) provided for you to access the Parental
   Controls menu or access the blocked channel. Make sure to not let
   children know the super password.


Turning the Parental Lock On or Off                                                       Picture    Audio     Setup      Channel

                                                                                    Change Password
1    Use password to access Setup-Parental Controls menu.                           System Lock                      On
                                                                                    US

2    Select System Lock item, then press 3 On or Off.
                                         or4
                                           to select                                Canada
                                                                                    RRT Setting
     To enable the blocking scheme you set up, you should set to ON.                Reset RRT
                                                                                    Button Lock
     To disable the blocking scheme you set up, please set it to OFF.                                               Off


                                                                                         Select              Move           MENU   Exit

Turning the Button Lock On or Off
 With the Button Lock on, the buttons on the TV control panel are locked. The
 message “Use remote to enable button” will appear every time you press a
                                                                                          Picture    Audio     Setup      Channel
 button on the TV control panel. Unplug your TV, then reconnect it to turn the
                                                                                    Change Password
 Button Lock off.
                                                                                    System Lock                      On

1    Use password to access Setup-Parental Controls menu.
                                                                                    US
                                                                                    Canada
                                                                                    RRT Setting
2    Select Button Lock item, then press 3 On (to turn the
                                              or4 to select                         Reset RRT
     Button Lock on) or Off (to turn the Button Lock off).                          Button Lock                      On


                                                                                         Select              Move           MENU   Exit




                                                               24
Adjusting SETUP Menu Options — Parental Controls (Continued)

Setting Parental Controls
                                                                                            Picture    Audio     Setup      Channel
You can set Parental Controls for the U.S. and Canada.                               Change Password
                                                                                     System Lock
Setting US Ratings                                                                   US
                                                                                                                      On

                                                                                     Canada
1   Use password to access Setup-Parental Controls menu.                             RRT Setting
                                                                                     Reset RRT
2   Press 5 US, then press ENTER.
            to select
          or6                                                                        Button Lock                      Off


3   Select TV if you want to set controls for U.S. TV ratings, select MPAA if               Select             Move           MENU    Exit
    you want to set controls for U.S. movie ratings. Then press ENTER to
    access.
                                  6 3
    If in TV RATING screen, press 5 select the rating you want
                                      or4  to
4   to block, then press ENTER. A lock symbol appears when a rating is
                                                                                            Picture    Audio     Setup      Channel
                                                                                     TV
    blocked.                                                                         MPAA

    If in MPAA RATING screen, just press 5 the rating. When
                                                  or6   to select
    you select a rating, that rating and all other higher ratings are locked.
    Age-based TV ratings
    Use these rating guidelines to prevent your children from watching
    certain TV programs, based on the rating limits set.                                    Select             Move           MENU    Exit

     Rating        Description
     TV-Y          All children.
     TV-Y7         Directed to children age 7 and older.
                                                                                            Picture    Audio     Setup      Channel
     TV-G          General audience.
     TV-PG         Parental guidance suggested.
     TV-14         Parents strongly cautioned.
     TV-MA         Mature audience only.                             (TV ratings)

    Content-based TV ratings
                                                                                         : Block           Press ENTER to Block or Unblock
     Rating        Description
                                                                                            Select             Move           MENU    Exit
     FV            Fantasy violence.
     V             Violence.
     S             Sexual situations.
     L             Strong language.
                                                                                            Picture    Audio     Setup      Channel
     D             Suggestive dialog.
                                                                                        G
                                                                                        PG
    US MPAA (movie) ratings                                                             PG-13
                                                                                        R
    Prevents children from watching certain movies, based on the rating limits          NC-17
    set. You can set the rating limits by blocking out all the movies with ratings      X
    above a certain level. These ratings apply only to movies, not to TV                N/A
    programs.
                                                                                            Select             Move           MENU    Exit

     Rating        Description
     N/A           Not rated.                                                                        (MPAA ratings)
     G             All children and general audiences.
     PG            Parental guidance suggested.
     PG-13         Parental guidance for children under 13.
     R             Restricted viewing, parental guidance is
                   suggested for children under 17.
     NC-17         No one 17 and under admitted.
     X             Adult only.




                                                                25
Adjusting SETUP Menu Options — Parental Controls (Continued)

Setting Parental Controls
                                                                                                 Picture        Audio     Setup       Channel
Setting Canada Ratings                                                                     Change Password
                                                                                           System Lock                         On
1   Use password to access Setup-Parental Controls menu.                                   US
                                                                                           Canada
                                                                                           RRT Setting
2   Press 5 Canada, then press ENTER.
            to select
          or6                                                                              Reset RRT
                                                                                           Button Lock                         Off


    Select Canada English if you want to set controls for Canada English
3   ratings, select Canada French if you want to set controls for Canada
                                                                                                Select                  Move            MENU    Exit



    French ratings. Then press ENTER to access.
                                                                                                 Picture        Audio     Setup       Channel
4   Now simply press 5 the rating. When you select a rating,
                            or6   to select                                                Canada English
    that rating and all other higher ratings are locked.                                   Canada French




5   Press EXIT to close the menu.



    Canadian English ratings                                                                    Select                  Move            MENU    Exit


                                                                      Canadian French ratings
    Rating        Description
     C            All children.                                       Rating              Description
     C8+          Children 8 years and older.                         G                   General programming.
     G            General programming.                                8+                  Not recommended for ages under 8.
     PG           Parental guidance.                                  13+                 Not recommended for ages under 13.
     14+          Viewers 14 and older.                               16+                 Not recommended for ages under 16.
     18+          Adult programming.                                  18+                 Adult programming.
     EXEMPT       Exempt programming.                                 EXEMPT              Exempt programming.



                     Picture   Audio     Setup   Channel                         Picture      Audio        Setup   Channel

                   C                                                           G
                   C8+                                                         8ans+
                   G                                                           13ans+
                   PG                                                          16ans+
                   14+                                                         18ans+
                   18+                                                         EXEMPT
                   EXEMPT

                     Select            Move        MENU   Exit                   Select                  Move           MENU   Exit




Downloading Rating Information
You can download rating information to use when setting Parental controls.

1   Use password to access Setup-Parental Controls menu.

2   Press 5 RRT Setting, then press ENTER.
            to select
          or6

    If the program is broadcast with RRT5 rating information, the rating information is downloaded automatically and can be
3   used for Parental Controls.
    The actual menu options of this rating vary, depending on the broadcaster.
    Note: If you want to clear the downloaded rating information, select Reset RRT. The rating information is cleared. If rating
    information is broadcast by another program, your TV downloads the new rating information.

                                                                 26
Adjusting SETUP Menu Options — Closed Caption

Closed Caption
You can turn on/off Closed Caption, to set Closed Caption type, to customize
digital closed captions, etc. through the menu.
                                                                                              Picture     Audio     Setup      Channel
1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.
                                                                                        CC Mode                          On
                                                                                        Basic Selection                  CC1

2    Select Closed Caption item, then press ENTER to open the Closed
     Caption setting screen.
                                                                                        Advanced Selection
                                                                                        Option
                                                                                                                    Service1




3             or 6
     Press 5 items, press 3 the selected items.
                    to select                or4  to adjust
     If you want to customize the digital closed captions, please select Option
     item, use ENTER to access. Then operate using 6     ,5 ,3 or4  button.                   Select              Move           MENU    Exit




4    Press EXIT to close the menu.


    Option                  Description
    CC Mode                 Allows you to select On, CC on Mute or Off.
                            On: Turns on the Closed Captions.
                            CC on Mute: Turns on the Closed Captions when the TV is muted.
                            Off: Turns off the Closed Captions.
    Note: You can press the CCD button to quickly turn on or turn off the Closed Captions.

    Basic Selection         Allows you to select closed caption options.
                            CC1, CC2,      Displays a printed version of the dialog or sound effects of a program. (Should be
                            CC3, CC4       set to CC1 for most programs.)
                            Text1/Text2 Displays network/station information presented using either half or the whole
                            /Text3/Text4 screen (if available).

    Advanced Selection Allows you to select advanced digital closed caption options.
    (Only for digital programs) Select from the available options (Service1–Service 6).

    Option                      You can customize the digital closed captions that appear on your screen by doing the following
    (Only for digital programs) steps: Highlight Option item, press ENTER button to access its sub-menu. Set Mode to Custom
                                and now you can customize the Size, Style, etc. to your preference.
                                To restore to default settings, just set Mode to Default.

                             Font Style: Select a style for the words.
                             Font Size: Set the size the words will appear in.                Picture     Audio     Setup      Channel
                                                                                        Mode                         Default
                             Font Edge Style: Select an edge style.
                                                                                        Font Style                   Default
                             Font Edge Color: Select a color for the edges.             Font Size                    Default
                                                                                        Font Edge Style              Default
                             FG Color: Select a color for the text.                     Font Edge Color              Default
                                                                                        FG Color                     Default
                             BG Color: Select a background color.                       BG Color                     Default
                                                                                        FG Opacity                   Default
                             FG Opacity: Select the opacity for the text.               BG Opacity                   Default
                             BG Opacity: Select the opacity for the background color.         Select              Move           MENU    Exit




                                                                 27
Adjusting SETUP Menu Options — Time & Menu Settings

Setting Sleep Timer
Sleep timer lets you select the amount of time you want your TV to wait before
it automatically turns off. This setting is cleared when the TV is turned off.         Picture   Audio      Setup       Channel

1   Press MENU, use 3 Setup menu, press 6
                      to select
                    or4                 to access.                               Sleep Timer
                                                                                 Time Zone
                                                                                                              Off
                                                                                                             Pacific
                                                                                 DST                          Off
2   Select Time item, then press ENTER to open the Time setting screen.          Mode
                                                                                 Year
                                                                                                             Auto
                                                                                                             2010
                                                                                 Month                         03
3             or 6
    Press 5 Sleep Timer, press 3 the amount
                   to select
    of time. To turn off the sleep timer, select Off.
                                                        to select
                                                      or4                        Day
                                                                                 Time
                                                                                                               15
                                                                                                          09 : 05 AM


4   Press EXIT to close the menu.                                                     Move               Select           MENU    Exit



    Note: To quickly set the sleep timer, press the SLEEP button repeatedly.

Setting the date and time
1   Press MENU, use 3 Setup menu, press 6
                        or4  to select                   to access.
    Select Time item, then press ENTER to open the Time setting screen.
                                                                                       Picture   Audio      Setup       Channel

                                                                          Sleep Timer                         Off
                                                                          Time Zone                          Pacific
             or 6
    Press 5 Time Zone, press 3 your time
2                to select                   or4  to select
    zone. You can select Pacific, Alaska, Hawaii, Atlantic, Eastern,
                                                                          DST                                 Off
                                                                          Mode                               Auto
    Central, or Mountain.                                                 Year                               2010
                                                                          Month                                03
                                                                          Day                                  15
3   If your viewing area observes daylight savings time, press      or 6
                                                                    5 Time
                                                                       to                                 09 : 05 AM
    highlight DST, then press 3 On.
                              or4  to select
                                                                                      Move               Select           MENU    Exit



4   Press 5  or 6Mode, then press 3 Manual (to set the date/time manually), or Auto (the
                   to highlight                        or4  to select
    date/time are automatically set by the TV signal source, based on the time zone you selected).

5   If you select Manual mode, make the settings as follows:
    . Press 5   or 6Year, Month, or Day, then press 3 the setting.
                     to highlight                   or4to adjust
    . Set the time by pressing 5 Time, then press 3 the hour, minute, or AM/PM field. Press
                                  or 6
                                     to highlight    or4 to highlight
     or 6
     5 the setting.
        to adjust
6   Press EXIT to close the menu.

                                                                                       Picture   Audio      Setup       Channel

Menu Settings                                                                    Parental Controls
                                                                                 Time
Lets you set menu transparency and menu language through the Menu                Closed Caption
                                                                                 Menu Settings
Settings menu.
                                                                                 VGA Settings

1   Press MENU, use 3 Setup menu, press 6
                    or4
                      to select         to access.                               Input Label
                                                                                 Restore Default
                                                                                 Audio Only                       Off
    Select Menu Settings item, then press ENTER to open the Menu
2   Settings screen.
                                                                                      Select             Move             MENU   Exit




3         or 6
    Press 5 items, press 3 the selected items.
             to select     to adjust
                         or4

    ! Transparency: Lets you adjust menu transparency. You can select from             Picture   Audio      Setup       Channel
      0%, 25%, 50%, 75%, 100%.                                                   Transparency                     25%
                                                                                 Menu Language               English
    ! Menu Language: Selects the on-screen menu language. English,
      French, Spanish are provided.

4   Press EXIT to close the menu.


                                                                                      Select             Move             MENU   Exit

                                                               28
Adjusting SETUP Menu Options — Input Label/Restore Default/Audio Only

Labeling an Input Source
1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.                                       Picture   Audio       Setup       Channel
                                                                                    Parental Controls
2    Select Input Label item, press ENTER to open the Input Label screen.           Time
                ,5 ,3
     Then use6 operate.
                     or4   to                                                       Closed Caption
                                                                                    Menu Settings
                                                                                    VGA Settings
    Option                    Description                                           Input Label
                       There are already several preset labels provided (such as    Restore Default
    Present Label
                       Antenna, Cable, Satellite, DTV, DVD, etc.), you can select   Audio Only                       Off
                       one of them as your current source label. (For example, if        Select               Move            MENU   Exit

                       you have a DVD player connected to AV1 IN jacks, you can
                       select DVD as that source’s label. When you press INPUT,
                       DVD appears instead of AV1). If you want to customize the
                       label in your preference, select “Custom” and then you can         Picture   Audio       Setup       Channel

                       edit the label.                                              Present Label               Custom
                                                                                    Custom Label        T V

    Custom Label       Only after you have set “Present Label” to “Custom”, then    Reset Label
                       this item is editable.
                       1 Highlight Custom Label, and then press 4   .

                       2   Press 6 a character, then press 3
                                  or5    to select                            to
                                                                            or4
                           move to a different position. Press MENU to exit.
                                                                                         Select               Move            MENU   Exit



    Reset Label        Running this function to reset current source label to the factory default. Perform this operation by
                       following the on-screen instructions.


Restoring Default Settings

1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.
                                                                                          Picture   Audio       Setup       Channel
     Select Restore Default item, then press ENTER. Now a confirmation
2    box appears.
                                                                                    Parental Controls
                                                                                    Time
                                                                                    Closed Caption
3    Use 3         to highlight
             or4 Yes and press ENTER to start running the
     [Restore Default] function. If you want to abandon, highlight No and press
                                                                                    Menu Settings
                                                                                    VGA Settings
     ENTER.                                                                         Input Label
                                                                                    Restore Default
     Running this function will reset most settings of current source to its        Audio Only                       Off
     default settings.
                                                                                         Select               Move            MENU   Exit


4    Press EXIT to close the menu.


Playing TV audio only
                                                                                          Picture   Audio       Setup       Channel
 You can turn off the video for a TV broadcast and listen to the audio only.
                                                                                    Parental Controls
                                                                                    Time
1    Press MENU, use 3 Setup menu, press 6
                       to select
                     or4                 to access.                                 Closed Caption
                                                                                    Menu Settings

2    Press 5 Audio Only item, then press 3 On.
           or 6
              to select                  or4
                                           to select                                VGA Settings
                                                                                    Input Label
                                                                                    Restore Default

3    Press EXIT to close the menu.                                                  Audio Only
                                                                                         Select               Move
                                                                                                                       On
                                                                                                                              MENU   Exit
     Notes:
     ! Audio Only only works when the input source is TV and your TV is receiving a broadcast signal.
     ! To exit Audio Only mode, press any button.
     ! When you exit Audio Only mode, the Audio Only option is automatically reset to Off.

                                                                29
Adjusting CHANNEL Menu Options

Accessing the Channel Settings                                                                              Picture        Audio     Setup        Channel
                                                                                                    TV Source                             Cable
1 Press MENU, use 3 Channel menu, press 6
                    to select
                  or4                   to access.                                                  Auto Scan
                                                                                                    Favorites
        or 6
2 Press 5 items,
           to select           press 3 the selected items. If
                                           to adjust
                                         or4                                                        Show/Hide
  the selected item has sub-menu, press ENTER to access. In the sub-menu,                           Channel No.                        2.1
         ,5 ,3
  use 6 operate.
               or4 to                                                                               Channel Label                   WGBH-SD
                                                                                                    DTV Signal:                                       Good
3 Press EXIT to close the menu.
                                                                                                            Select                 Move             MENU    Exit

Option               Description
TV Source            Before running auto scan, you must specify the type of signal source that is connected to the unit. (i.e.,
                     an antenna or cable system). Select Antenna if using VHF/UHF antenna, select Cable if using Cable TV.

Auto Scan            Select to automatically search for all channels available and stores them in memory. (After you have
                     run initial setup, you can perform auto scan to search programs again if necessary.)
                     1   In Channel menu, select Auto Scan item, press ENTER to access.
                         Now a confirmation box appears. Use 3          to highlight Yes
                                                                    or4 and press ENTER to start auto
                     2   scan. If you want to abandon, highlight No and press ENTER.

                                                                                                                 Are you sure?
                                   Picture   Audio      Setup       Channel           Press ENTER                No                Yes
                           TV Source                        Cable
                           Auto Scan                                                                       Press “ENTER” Key To Select
                           Favorites
                           Show/Hide
                           Channel No.                   2.1                                           RF CH           :                   53
                           Channel Label              WGBH-SD                                          Found           :                    9
                           DTV Signal:                                   Good                          Analog          :                    7
                                                                                                       Digital         :                    2
                                  Select             Move             MENU    Exit




Favorites            Lets you set up a list of your favorite channels.

                     1    In Channel menu, select Favorites item, press ENTER to access.
                                  6
                          Press 5press ENTER to set the channel as favorite (a check mark appears) or not
                                     to select,
                     2    (the check mark disappears).

                          Note: If the list has more than one page, press 3 through the pages.
                                                                            to scroll
                                                                          or4

                     3    Press EXIT to close the menu.
                          To select a channel in the favorite channel list, press FAVORITE, press 5 to highlight the
                                                                                                  or6
                          channel, then press ENTER.



                                  Picture    Audio     Setup        Channel                                  Picture       Audio     Setup        Channel

                          TV Source                         Cable
                                                                                                   Channel No.             Channel Name                    Favorites
                          Auto Scan                                                                 1.2                    Sencore
                                                                                     Press ENTER    2.0
                          Favorites
                                                                                                    2.1                    WGBH-SD
                          Show/Hide                                                                 2.2                    PBS-HD
                                                         2.1                                        2.10                   WGBH-Dx
                          Channel No.                                                               6.0
                          Channel Label               WGBH-SD                                       7.0
                                                                                                    11.1                   MBC DTV
                          DTV Signal:                                   Good                        12.0
                                                                                                    14.0

                               Select                Move             MENU   Exit                           Select                 Move             MENU    Exit




                                                                             30
Adjusting CHANNEL Menu Options                                             (Continued)

Option          Description

Show/Hide       Lets you delete channels from the channel list so your TV skips the channels when you press
                Channel up/down button. You can still tune to the channel using the number buttons.
                1   In Channel menu, select Show/Hide item, press ENTER to access.
                            6
                    Press 5 the channel you want to hide (the default is to show the channel), then
                               to highlight
                2   press ENTER to remove the check mark from the channel. The check mark appears if you add
                    back the channel by pressing ENTER again.

                Note: If the list has more than one page, press 3 through the pages.
                                                                  to scroll
                                                                or4


                          Picture   Audio     Setup        Channel                           Picture    Audio      Setup       Channel
                    TV Source                      Cable                            Channel No.          Channel Name                   Show
                                                                            Press
                    Auto Scan                                                        1.2                 Sencore
                                                                            ENTER    2.0
                    Favorites
                                                                                     2.1                 WGBH-SD
                    Show/Hide                                                        2.2                 PBS-HD
                                                2.1                                  2.10                WGBH-Dx
                    Channel No.                                                      6.0
                    Channel Label            WGBH-SD                                 7.0
                                                                                     11.1                MBC DTV
                    DTV Signal:                                Good                  12.0
                                                                                     14.0

                         Select             Move            MENU    Exit                    Select               Move            MENU    Exit




Channel No.     If a channel is not already labeled, you can label the channel to make it easier to identify. Also
   &            you can rename the channel already labeled.
Channel Label   1 channel you want topress 6 Channel No., then press 3 the
                    In Channel menu,
                                         label.
                                                 or5  to highlight                            or4   to select


                2   Press 6   to highlight
                            or5 Channel Label, then press ENTER to open the channel label
                    screen.
                    Press 6 a character, then press 3 to the next position. Repeat to
                           or5  to enter              to move
                                                    or4
                3   add more characters.

                4   Press MENU to exit to the previous menu.


                          Picture   Audio     Setup        Channel                           Picture    Audio      Setup       Channel

                    TV Source                      Cable
                    Auto Scan
                    Favorites                                               Press                      A B C –
                    Show/Hide                                               ENTER
                    Channel No.                 2.1
                    Channel Label            WGBH-SD
                    DTV Signal:                                Good


                         Select             Move             MENU   Exit                    Select              Move             MENU   Exit




DTV Signal      You can check the DTV signal strength to
                determine if you need to adjust your antenna or
                digital cable input. The higher the signal strength,                         Picture    Audio      Setup       Channel

                the less likely you are to experience picture                       TV Source                          Cable
                degradation.                                                        Auto Scan
                                                                                    Favorites
                                                                                    Show/Hide
                To check the DTV signal strength, you can open                      Channel No.                     2.1
                the Channel menu, and the DTV Signal status                         Channel Label                WGBH-SD
                appears at the bottom of the menu.                                  DTV Signal:                                   Good


                                                                                            Select              Move            MENU    Exit




                                                             31
Image Adjustments for VGA (PC) Mode
Before adjusting the image, make sure that you select the correct source (VGA).

 Adjusting Computer Settings
                                                                                        Picture   Audio     Setup      Channel

                                                                                  Parental Controls
1    In VGA mode, press MENU and the main menu screen displays.
                                                                                  Time
                                                                                  Closed Caption
2    Press 3 Setup menu, press 6 menu.
             to select
           or4                 to access the                                      Menu Settings
                                                                                  VGA Settings

3    Press 5 VGA Settings item, then press ENTER to
     access.
               to select
             or6                                                                  Input Label
                                                                                  Restore Default
                                                                                  Audio Only                     Off

4    Press 5 navigate through the options or adjust an
              ,6 ,3  ,4  to                                                            Select             Move           MENU   Exit

     option. To confirm, press ENTER.

5    Press EXIT to close the menu.

  Option                  Description
                                                                                        Picture   Audio     Setup      Channel
    H.Position            Moves the image on the screen left or right.            H.Position                                           70
                                                                                  V.Position                                           40
    V.Position            Moves the image on the screen up or down.               Clock                                                60
    Clock                 Adjusts the sample frequency.                           Phase                                                50
                                                                                  Auto
    Phase                 Improves the focusing of a stable image.
    Auto (Auto adjust)    Selects and activates to start auto adjustment.
                          The set automatically adjusts the image                      Select             Move           MENU   Exit
                          settings, such as position and phase.




                                                           32
Troubleshooting
If, after reading these operating instructions, you have additional questions related to the use of your television, please call the
services center in your local area.
Before calling service, please check the symptoms and follow suggested solutions.
Remote Control
 Problem                                    Possible Solutions
                                            ! The batteries could be weak. Replace the batteries.
Remote control does not operate             ! Check the orientation of the batteries.
                                            ! Make sure the power cord is plugged in.

Video and Audio
 Problem                                    Possible Solutions
                                            ! Make sure the power cord is plugged in.
No picture (screen not lit),
                                            ! Press POWER on the TV or on the remote control.
No sound
                                            ! Try another channel; it could be station trouble.
Dark, poor or no picture                    ! Select a proper picture mode.
(Screen lit), good sound                    ! Adjust the brightness in the video setting.
                                            ! Check the antenna/cable connections.
No color/dark picture/color                 ! Adjust the color saturation in the video setting.
is not correct
Only snow and noise appear                  !   Check the antenna/cable connections.
on the screen                               !   Try another channel; it could be station trouble.
Dotted lines or stripes                     !   Adjust the antenna.
                                            !   Move the TV away from noise sources such as cars, neon signs, or hair dryers.
Double images                               ! Using a highly directional outdoor antenna or a cable may solve the problem.
Good picture, no sound                      ! The sound may be muted. Press MUTE again to cancel.
                                            ! Make sure the stereo mode is set to stereo or mono.
Audio noise                                 ! Communication problems may occur if infrared communication equipment (e.g.,
                                                infrared cordless headphones) is used near the TV. Move the infrared
                                                communication equipment away from the TV until the noise is eliminated.

General
 Problem                                    Possible Solutions
One or some channels can’t be               ! These channels may be blocked. Please unblock them (see <Setting Parental
displayed                                     Controls> section).
                                            ! These channels may be set hidden. You may set it to show or select them with 0-9
                                              number buttons.

Lost password                               ! You may use the super password (9999)to access the Parental Controls menu and set
                                                a new password. Please remember your new password and keep it carefully.

Some items can’t be accessed                ! If a setting option appears in gray, this indicates that the settings option is unavailable
                                                in current input mode.
TV cabinet creaks                           ! When the TV is in use, there is a natural rise in temperature, causing the cabinet to
                                                expand or contract and may be accompanied by a slight creaking noise. This is not a
                                                malfunction.

Control buttons do not operate
                                            ! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
                                                and turn on the unit again.

Note: If your problem is not solved, turn your unit off and then on again.
Cautions: Never attempt to repair a defective TV yourself.

                                                                    33
Specifications

 Type:                                 LCD TV
 Panel:                                32” TFT LCD
 Resolution (TV & Computer):           Up to 1920 x 1080p @ 60Hz refresh rate
                                           o              o
 Viewing angle:                        178 Vertical / 178 Horizontal
 Response time:                        6.5 milliseconds
 Contrast ratio:                       5000: 1 (Typ.)
 TV system:                            NTSC-M, ATSC
 Receiving channel:                    VHF 2-13, UHF 14-69, CATV 1-125, CADTV 1-135, DTV 2-69
 Audio multiplex:                      BTSC system
 Audio out:                            8Wx2
 Power Requirement:                    AC 120 V, 60 Hz
 Power Consumption:                    98 W
 Dimensions (W x H x D, with stand):   776×555 ×210 mm
 Weight:                               10.3 kg (stand included)

 Terminals:                            Antenna in (1)
                                       AV in (2)
                                       S-Video (2)
                                       COMPONENT in (2)
                                       VGA/audio (1)
                                       HDMI in (3)
                                       Audio left and right (1)
                                       Digital optical (1)
                                       Headphone (1)
                                       SERVICE PORT (1)


 Note:
 1. Design and specifications are subject to change without notice.
 2. Weight and dimensions shown are approximate.
 3. Specifications and external appearance may be changed for the sake of improvement.




                                                   34
SANYO COMFORT WARRANTY

WARRANTY APPLICATION
New, unused SANYO Color Television products purchased in Canada through a SANYO authorized dealer are
warranted against manufacturing defects in materials and workmanship for ONE YEAR for parts and labor, from
the date of purchase by the original retail purchaser for non-commercial use. This warranty only applies in favor of
the original retail purchaser of the warranted product.

SANYO CANADA INC.'S RESPONSIBILITY
During the warranty period, SANYO Canada Inc. will repair, or at our option, replace a Color Television product
which shows evidence of a manufacturing defect in materials or workmanship.
Replacement PARTS are warranted for the remaining portion of the warranty period.

WHAT IS NOT COVERED
(a)   Color Television products purchased outside Canada.
(b)   Color Television products purchased in a used condition.
(c)   Problems due to product set-up and installation.
(d)   Adjustments that are outlined in the Operating Manual.
(e)   Accessory items including antenna, batteries and connecting cables.
(f)   Damage in or due to transportation.
(g)   Damage due to improper maintenance, accident, abuse, misuse or negligence.
(h)   Damage caused by lightning and power surges.

ORIGINAL RETAIL PURCHASER'S RESPONSIBILITY
You, the original retail purchaser, must present your original, dated bill-of-sale together with this warranty to
SANYO Canada Inc. or to an authorized Sanyo Service Depot* when you make a claim under this warranty.
You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from
SANYO Canada Inc. or an authorized Sanyo Service Depot. You also are responsible for the cost of any
MAINTENANCE necessary in respect of the product.
*In-home service is only available to the units whose screen size is 46 inches or over, and limited to the locations
within a 30-km radius of any authorized Sanyo Service Depot, throughout Canada.
 WARRANTY BECOMES VOID This warranty becomes void if the product's serial numbers are altered or
removed or if any repair to the product is made other than by SANYO Canada Inc. or by an authorized Sanyo
Service Depot.
LIMITATIONS
(a)   SANYO Canada Inc. reserves the right to change or improve the design of the model of the product
      warranted hereunder without incurring any obligation to make any modifications to or to install any
       improvement in or on the product.
(b)   In no event shall SANYO Canada Inc. or any of its Authorized Dealers be liable for special or
       consequential damage arising from the use of this product.

STATUTORY WARRANTIES
The above provisions do not preclude the operation of any applicable provincial statute which in certain
circumstances may not allow some of the limitations and exclusions described in this Warranty. Where any terms
of this Warranty are prohibited by such a statute, they shall be deemed null and void but the remainder of this
warranty shall remain in effect.

HOW TO OBTAIN WARRANTY SERVICE
Please contact the Sanyo Authorized Dealer from whom the product was purchased or contact us directly at:
SANYO Canada Inc.
201 Creditview Road
Woodbridge Ont. L4L 9T1
(905) 265-4100
1-800-263-2244




                                                           35
   PRINTED ON
RECYCLED PAPER




                 5944037590
                   Ver.1.0

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:8/19/2012
language:Latin
pages:36