AIR

Document Sample
AIR Powered By Docstoc
					                                                                                        MIN             DAY         WEEK              MONTH
 AIR COMPRESSORS AND ACCESSORIES
01-101  3-5 CFM AIR COMP (run small air tools or 1 air nailer). 20.00 ........25.00 ........ 75.00 ...........150.00
01-102  8 CFM ELEC. (needs 15 amp or 7,000 watt gen) ................ 25.00 ........35.00 ...... 105.00 ...........210.00
01-103  11 CFM GAS (runs 2 air nailers and most air tools) .......... 30.00 ........45.00 ...... 135.00 ...........330.00
01-104  90-100 CFM DIESEL (towable run 1 hammer or drill) ..... 75.00 ......100.00 ...... 300.00 ...........730.00
        above with 30 to 90 lb. hammer or drill and hose) ............. 90.00 ......110.00 ...... 330.00 ...........830.00
01-106  185 CFM (towable runs 2 hammers or drills) ................... 105.00 ......125.00 ...... 375.00 ...........930.00
        above with 2 hammers or drills and 2 50 foot hoses ......... 120.00 ......145.00 ...... 435.00 ........ 1,130.00
01-108  375 CFM DIESEL (towable) .............................................. 155.00 ......165.00 ...... 675.00 ........ 1,930.00
        ACCESSORIES FOR LARGE COMPRESSORS (Price includes 1 bit or steel)
02-115  30 LB. HAMMER(use for horizontal breaking) ................. 20.00 ........25.00 ........ 75.00 ...........150.00
02-116  60 LB. HAMMER(use for lighter breaking) ....................... 20.00 ........25.00 ........ 75.00 ...........150.00
02-117  90 LB. HAMMER(use for rock pave cutting & breaking)) 20.00 ........25.00 ........ 75.00 ...........150.00
02-119  60 LB. ROCK DRILL (use up to 3" bit) ............................. 40.00 ........50.00 ...... 175.00 ...........480.00
02-120  30 LB. CLAY DIGGER (for dirt digging) .......................... 20.00 ........25.00 ........ 75.00 ...........150.00
02-121  CHIPPING HAMMER ........................................................ 15.00 ........20.00 ........ 60.00 ...........130.00
02-122  RIVET BUSTER(use for steel cutting or heavy driving) ... 25.00 ........30.00 ........ 90.00 ...........280.00
02-123  TAMPER 5" ROUND (use for narrow ditch) .................... 20.00 ........25.00 ........ 75.00 ...........180.00
02-124  TAMPER 12" JUMPING JACK ......................................... 55.00 ........70.00 ...... 210.00 ...........580.00
02-125  TILE STRIPPER (use for removing ceramic tile) .............. 25.00 ........30.00 ........ 90.00 ...........230.00
02-126  MOIL OR CHISEL (for 30 to 90 lb. Hammers) ................ n/a .............10.00 ........ 30.00 .............60.00
02-127  ASPHALT SPADE (for 60 or 90 lb. Hammers) ................. n/a .............12.50 ........ 37.50 .............75.00
02-128  POST DRIVER (use with 60 or 90 lb. Hammer) ............... n/a .............15.00 ........ 45.00 .............90.00
02-129  SPADE (use with clay digger ) ............................................ n/a .............10.00 ........ 30.00 .............60.00
02-130  CHIPPING HAMMER BITS ............................................. n/a .............. 8.00 ........ 24.00 .............48.00
02-131  STEEL W/ BIT (2-1/2 to 6' with bit ) ............................... n/a .............15.00 ........ 45.00 .............75.00
02-132  HOSE ( 50 feet lengths of hose ) .......................................... n/a .............10.00 ........ 30.00 .............60.00
02-133  STEEL PIPE DRIVER (up to 3" pipe & road post) .......... 80.00 ......105.00 ...... 315.00 ...........930.00
        SANDBLAST EQUIPMENT ( eye and ear protection included)
03-140  35 LB. CAPACITY (requires 90 cfm comp. ) ..................... 50.00 ........70.00 ...... 215.00 ...........630.00
03-141  100 LB. CAPACITY (requires 125 cfm comp. ) ................. 70.00 ........80.00 ...... 315.00 ...........930.00
03-142  200 LB. CAPACITY (requires 185 cfm comp. ) ................. 80.00 ........90.00 ...... 355.00 ........ 1,050.00
03-143  350 LB. CAPACITY (requires 210 cfm comp. ) ................. 90.00 ......100.00 ...... 435.00 ........ 1,230.00
03-144  FRESH AIR HOOD (OSHA approved ) ............................. 55.00 ........55.00 ...... 215.00 ...........480.00
        ACCESSORIES FOR SMALL COMPRESSORS
04-151  NAILERS FINISH (use for trim and cabinets ) ................ n/a .............15.00 ........ 45.00 ...........120.00
04-152             CONCRETE (use for carpet strip wall angle) . n/a .............20.00 ........ 60.00 ...........165.00
04-153             FRAMING (available strip or coil ) ................. n/a .............20.00 ........ 60.00 ...........165.00
04-154             ROOFING (coil type ) ....................................... n/a .............25.00 ........ 75.00 ...........180.00
04-155             FLOORING (hard wood floor inst. ) ............... n/a .............30.00 ........ 90.00 ...........255.00
04-156            FLOORING (laminate type flooring) ............... n/a .............40.00 ...... 120.00 ...........345.00
04-165  AIR IMPACT WRENCHES 3/8" DRIVE ......................... n/a .............15.00 ........ 45.00 .............90.00
04-166             1/2" DRIVE ...................................................... n/a .............20.00 ........ 90.00 ...........120.00
04-167             3/4" DRIVE ...................................................... n/a .............25.00 ........ 75.00 ...........150.00
04-168             1" DRIVE ......................................................... n/a .............30.00 ........ 90.00 ...........180.00
04-171  RIVET GUN ( use up to 3/16" rivets )................................ n/a .............25.00 ........ 75.00 ...........150.00
04-172  GRINDER ( uses 7: grinding stone ) .................................. n/a .............40.00 ...... 135.00 ...........230.00
04-173  POLISHER ( uses 7" soft wheel or buffer pad ) ................ n/a .............40.00 ...... 135.00 ...........230.00
04-174  ORBITAL SANDER ( uses glue on sheets ) ....................... n/a .............15.00 ........ 45.00 .............90.00
04-175  DIE GRINDER ( 1/4" capacity high speed ) ...................... n/a .............15.00 ........ 45.00 .............90.00
04-176  CHISEL ( includes bits ) ..................................................... n/a .............15.00 ........ 45.00 .............90.00
04-177  NEEDLE SCALER ( use for cleaning steel welds ) ........... n/a .............20.00 ........ 60.00 ...........120.00
04-178  AIR DRILL REVERSIBLE (2" capacity chuck) .............. n/a .............15.00 ........ 45.00 .............90.00
04-179  AIR HOSE (1/4" x 50' ) .................................................... n/a .............10.00 ........ 30.00 .............60.00

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:6
posted:8/18/2012
language:
pages:1