wrench by hedongchenchen


									                        STEYR SCOUT BOLT WRENCH TEMPLATE

For those of you in desperate circumstances you van make your own bolt wrench as
outlined below.

                   When line above is 2 inches long the picture is full scale.
Use picture to trace shape onto some 1/4” or 5/16” aluminum or other strong but easily
worked material and cut out. Note edge on left slot shows some depth shadow due to
angle of picture while the right side does note. Use the right slide slot for reference.

Actual slot width is approximately .366” Radius of curved areas is about .406”

wrench.doc 2006-10-09 - jcs

To top