METHOD STATEMENT - DOC 3 by HC12080907295

VIEWS: 105 PAGES: 8

									           Egypt L.L.C                                 Doc. No.:
Facility Management      METHOD STATEMENT
Division                                               Issue No.:

                                                       Revision:
Nile Corniche Project
no. 1018                 ELECTRICAL PANEL /EQUIPMENT
                                INSTALLATION
       Page 1 of 8                                     Date:




                         METHOD STATEMENT



  ELECTRICAL PANEL / EQUIPMENT INSTALLATION
           Egypt L.L.C                                 Doc. No.:
Facility Management      METHOD STATEMENT
Division                                               Issue No.:

                                                       Revision:
Nile Corniche Project
no. 1018                 ELECTRICAL PANEL /EQUIPMENT
                                INSTALLATION
       Page 2 of 8                                     Date:


                                 CONTENTS

1.0 SCOPE

2.0 REFERENCE DOCUMENTS

3.0 PERSONS IN CHARGE

4.0 RESOURCES

5.0 MATERIAL FOR PANEL / EQUIPMENT INSTALLATION

6.0 DESCRIPTION OF WORK METHOD

7.0 ORGANIZATION OF MANPOWER

8.0 HEALTH AND SAFETY

9.0 SUPPORTING DOCUMENTS
           Egypt L.L.C                                           Doc. No.:
Facility Management            METHOD STATEMENT
Division                                                         Issue No.:

                                                                 Revision:
Nile Corniche Project
no. 1018                      ELECTRICAL PANEL /EQUIPMENT
                                     INSTALLATION
       Page 3 of 8                                               Date:


  1.0 SCOPE

        This procedure outlines the methods to be followed for the erection of
        Electrical Panels / Equipment.

  2.0 REFERENCE DOCUMENTS

              Construction Quality Plan              Doc ref…………………
              Field Materials Control Procedure      Doc ref. ………………
              Field & Inspection Plan for Elect.     Doc ref. ………………….
              Operational Procedure (Acceptance, Storage, Handling and Preservation of
             Materials in the Job site.               Doc ref. …………………
              Operational Procedure (Job Site Operations Management) Doc
               ref. …………………..
              Field Test and Inspection Plan for Electrical Doc ref. …………./SAFETY
               PLAN

  3.0 PERSONS IN CHARGE

        Site Manager                                 Mr. …………………
        Construction Manager                         Mr. …………………..
        Materials Manager                            Mr. …………………….
        Field Engineer                               Mr. ………………………
        HSE Manager                                  Mr. ……………………

  4.0 EQUIPMENT

        In general the main equipment to be used for the erection are listed below :-

        No      1        Crane 20 Tonnes Capacity
        No      1        Truck / Trailer
           Egypt L.L.C                                           Doc. No.:
Facility Management            METHOD STATEMENT
Division                                                         Issue No.:

                                                                 Revision:
Nile Corniche Project
no. 1018                      ELECTRICAL PANEL /EQUIPMENT
                                     INSTALLATION
         Page 4 of 8                                             Date:

         No     1        Pick-Up
         No     1        Welding Machine
         No     2        Transpallets

         Plywood sheets as required.
         Rolling Pipes wherever required.
         Diesel Generator 20KVA if necessary.

  5.0 MATERIAL FOR PANEL / EQUIPMENT INSTALLATION
         As per attached Project Schedule and Project Drawings Pertaining to the Electrical
         Scope.

  6.0 DESCRIPTION OF WORK METHOD

         The work method to install the above mentioned Panels / Equipment shall be in the
         following sequence.

    A.        Pre-Installation Checks

     Verification of Equipment layout from relevant Construction Drawings.
     Check drawings are of current revised status.
     Site released for Panel Installation.
     Conform readiness of the area.
     Location of the Panels / Equipment shall be determined and the covered false flooring
      shall be removed to expose the main structural steel. This will however be done in
      phases depending on the panel that is going to be installed.
     Review Vendor drawings of the Panels and familiarize the installation method
      recommended by the Vendor.
     Exposed floor areas shall be cordoned by means of hazard identifying tape.
     Confirm that all Tools & Tackles required for installation are available. As a minimum
      the following shall be made available.
           Egypt L.L.C                                         Doc. No.:
Facility Management          METHOD STATEMENT
Division                                                       Issue No.:

                                                               Revision:
Nile Corniche Project
no. 1018                  ELECTRICAL PANEL /EQUIPMENT
                                 INSTALLATION
         Page 5 of 8                                           Date:


         Slings
         D-Shackles
         Crowbars
         Pipe-Rollers
         Fitter’s Tool Box

         Electrician Tool Box
         Welding Machine
         Abrasive Cutting Machine
         Drill Machine
         Grinding Machine

     Check adequate place for Unloading the Panels.
     Confirm the Height and Width of the entrances.
     Personnel involved in the activity are made aware of the risks and the steps to be taken
      to mitigate any hazard or unsafe situation.
     Foundation frame shall be made and properly aligned for the installation of the Panels.
     The tentative sequence for the Panel / Equipment erection will be as per the attached
      Project Schedule.

    B.      Material withdrawn from ware-house

     Material inspection will be carried out to ascertain that no damage has occurred to the
      equipment. Incase of any damages common inspection and report will be issued.
     Store material requisition shall be made.
     The material shall be transported in their Original packing to location.
     The Crane shall be positioned in such a way that there is no obstruction to movement
       of vehicles or hindrance to works of other companies.

    C.      Support prefabrication
           Egypt L.L.C                                          Doc. No.:
Facility Management        METHOD STATEMENT
Division                                                        Issue No.:

                                                                Revision:
Nile Corniche Project
no. 1018                  ELECTRICAL PANEL /EQUIPMENT
                                 INSTALLATION
       Page 6 of 8                                              Date:

     The supports required, if any, for the installation of the Panels will
      be prefabricated in the workshop of Gemmo in accordance with the drawings and
      vendor recommendations.
     Frame supports supplied by vendor shall be placed in position aligned and installed.
     Frame installation will be carried out by ensuring that correct level has been achieved.

    D.      Description of sequence

     Equipment packages shall be unpacked outside the sub-station room just prior to the
      installation.
     Shortages or damages if any shall be brought to the attention of the Contractor
      /Engineer immediately.
     Each and every loose item shall be properly identified before installation.
     Panels shall be lifted by the Crane and off-loaded on the platform outside the entrance
      of the respective Sub-stations / Rooms.
     It shall be ensured that the Crane lifting range will be within the specified limited
      capacity, due to angular position at the entrance of the main door especially during
      lifting of the heaviest Panel of 3 Tonnes.
     From here the Panels will be slided on Pipe rollers and or Transpallets over Plywood
      sheets and taken to location.
     They will then be Placed in position over the foundation frame already installed.
     The Panels will then be aligned using Spirit level & Water level.
     Interconnection of wires or Bus-Bars between panels shall be completed.
     Bus-Bars will be tightened with suitable Torque Wrench.
     Insulation tests will be carried out as well as all pre-commissioning testing (see
      attached forms)
     Inspection of the installation and punch list.
     As-Built mark-up drawings certified by Contractor/Engineer.

  7.0 ORGANIZATION OF MANPOWER

     Team for Panel Installation
           Egypt L.L.C                                         Doc. No.:
Facility Management           METHOD STATEMENT
Division                                                       Issue No.:

                                                               Revision:
Nile Corniche Project
no. 1018                     ELECTRICAL PANEL /EQUIPMENT
                                    INSTALLATION
         Page 7 of 8                                           Date:



         Field Engineer                   Mr. ……………….
         Supervisor                       Mr. ………………..
         No 3        Electricians
         No 5        Fitters
         No 10       Riggers
         No 2        Welders

  8.0 HEALTH AND SAFETY
    A.      Gemmo will follow the instruction of : Plan of Precaution for the Hygiene and
                                                   Physical safety of worker on the site Doc
                                                   Ref No………………/SAFETY PLAN
    B.      Tool Box Meeting : Will be held daily before Job Starting.

    C.      Job Safety Analysis.

    D.      Safety at Work:

    See attached document “PLAN OF PRECAUTION FOR THE HYGIENE AND
    PHYSICAL SAFETY WORKER ON THE SITE”

    E.      Use of P.P.E.

     All the workers shall be provided with safety equipments to all workers ensure that the
      same worker using them in a properly way.
     Our staff has the responsibility to check workmen wearing proper PPE at site daily.
     If same worker will be found not wearing proper PPE, the supervisor will stop him and
      provide for those immediately.
     The item issued to the worker must be periodically inspected and changed in case that
      they are found damaged or they do not meet the specified conditions.
     Personal Protection Equipment

            1.      Earing protection, Ear Muff or Plugs.
           Egypt L.L.C                                            Doc. No.:
Facility Management           METHOD STATEMENT
Division                                                          Issue No.:

                                                                  Revision:
Nile Corniche Project
no. 1018                     ELECTRICAL PANEL /EQUIPMENT
                                    INSTALLATION
       Page 8 of 8                                                Date:

            2.      Helmet, Hard-Hat.
            3.      Hand Gloves (Leather or Cotton)
            4.      Dust Mask respiratory protection.
            5.      Glasses splinter proof.
            6.      Safety Shoes.
            7.      Summer / winter Clothing.
            8.      Equipment and Clothing for body protection.

Items of personal use shall be inspected regularly and maintained in serviceable and sanitary
condition and before reissuing to another person or returned to storage shall be cleaned,
disinfected, inspected, and repaired. Emplyees shall wear clothing suitable for weather and
work conditions.

  9.0 SUPPORTING DOCUMENTS

  A. Project Drawings

     Electrical equipment Layouts.
     Electrical Panel Fixing Details.
     Vendor Drawings for Installation of the Panels.

  B.    Typical Crane Position and Off-Loading Loaction

  C. Planned Schedule of Activities

								
To top