Module-9 Labs

							Module-9 Labs


   1. Install live Linux Protech-One
   2. Right-hand click on desktop and select SECURITY TOOLS, SNIFFERS,
      WIRESHARK.
   3. After WIRESHARK is open select Capture and Interfaces.
   4. Record the Interfaces that show traffic (eth0, eth1, ….).
   5. Select an Interface and it run for 2 minute.
   6. Stop, sort on Protocols and record the listed Protocols.
   7. Are there any 802.11 protocols?
   8. Close WIRESHARK.
   9. Right-hand click on desktop and select and TERMINAL ROOT.
   10. Type: $ iwconfig <enter>
   11. Record the wireless interfaces and their MODE information.
   12. To change the MODE:
   13. Type $ su <enter>     (super user )
              # iwconfig eth1 mode monitor <enter> (if eth1 exists)
   14. Repeat for other interfaces (replace eth1 with other interfaces)
   15. Type # iwconfig <enter>
   16. Record the wireless interfaces and their MODE information.
   17. Which MODES have changed?
   18. Leave the editor open and open WIRESHARK.
   19. Select the interface with the changed MODE.
   20. Run for 2 minute.
   21. Stop, sort on Protocols and record the listed Protocols.
   22. Are there any 802.11 protocols?
   23. Close WIRESHARK.