JOSEPH A.T
                                           Alappat House, P.O Kallettumkara, Thrissur (D.T), Pin - 680 683; Kerala
                                                            Mob: + 974 33127229; Mail:

                                            ELECTRICAL ENGINEER

       {Core Competency: Operations and Maintenance of Sewage/Waste water treatment plants }

Over 13 years of progressive experience in being accountable for the Operations, Maintenance, Installation and
commissioning of Electrical Systems of Sewage treatment plants and process plants with an understanding of
current systems, determining compliance to standards and processes, support in ensuring uptime, operational
efficiency, maintenance, testing / commissioning while working closely with construction and operations teams

                         Qualifications Summary / Selected Career Accomplishments

      Functional strengths in performing: Engineering Calculations, Power Distribution, Analysis for demand
       load, Equipment Specifications, Metering, Electrical Protection, fault Studies, Electrical Building Layouts,
      Proficient in the operation and maintenance of high, medium and low voltage power distribution
       systems and motor control installations

              Monitor, operate, maintain HT & LT installation systems, Process Control Instrumentation system,
               Generators & Transformers
              PLC ( Telemecanique SLC 5, Siemens S5 – 135U with more than 1000 I/Os, SCADA -       Intellution and
               Coros )
              1000/750 KVA Diesel Generators with synchronizing panel
              11 & 6.6 KV / 433 V, 1600 KVA transformer with OLTC
              VFD ( Telemechanique /Siemens up to 138A) , Soft starters ( Siemens 250KW)
              MCC – 433 V, 2500A LT distribution system for Motors ranging from 3.7 to 250 KW
      Waste Water Treatment: up to 50000 Cub. Meter /Day (10 package treatment plants with capacity ranging
       from 500 m3/day to 12000 m3/day with extended aeration process)

              Mechanical Coarse screening & Fine Screening, Deodorizing systems
              Aeration system for Equalization , Aeration, Clarifier, Thickener, Digester Tanks
              Control and protection system for Submersible sewage pumps , Horizontal back pull out pumps,
               Progressive cavity sludge transfer pumps
              Sludge separation units –Decanters/centrifuges , Sludge screw conveyors & Lime mixing units
              Pressure sand filters and gravity sand filters, UV treatment units, Air compressors
              Dosing Pumps , Pressure gauges, level floats, level transmitter ( hydrostatic/ ultrasonic ), pH
               sensor, pH transmitter, Air flow meter, DO sensors/transmitter, Flow meter ,Piping and
              Treated sewage Effluent disposal network & Sprinklers , Controllers & solenoid operated valves

      Ability to identify root cause of the equipment/process issues, designing corrective actions,
       implementation and tracking of results
             Sound exposure in instrumentation, repairing power systems, and operating test equipments
               focusing on electronics, pneumatics, mechanical & instrumentation
             Expert in providing extensive QA/QC services in site, NCR, inspection, test plans
             Adept in operation, engineering, up-gradation and trouble shoot of PLC, SCADA, VCB, ACB, VFD,
               UPS, Protection relays, Control Panels & Cabinets
                                              Key areas of skills include
                     ~ Strong knowledge on current standards and codes of ISO 9001 / 14001 / EHS
    ~ Self motivated, effective team player, possess strong analytical, organizational and communication skills
                    ~ Expert in providing guidance to other team members – a strong team builder
          ~ Skills include good problem solving, decision making, accuracy, efficiency, attention to detail

                                          Professional Work Experience

         NITCO, DOHA                       MAINTENANCE ELECTRICAL ENGINEER                        2007 - 2010

PROJECT: Operation and Maintenance of Waste Water Treatment plants of QATAR PETROLEUM, Rasslaffan.
Maintenance Management

   Preventive, Predictive and Breakdown Maintenance of Waste water treatment Plant
   Preparation of Snag list/Punch list for client and inspection of the same after completion.
   Trouble shooting of of Sewage pumps, valves, surge vessels, pipe lines- machining if any
   Attending client meeting, Close coordination with operation, store, purchase dept.
   Preparation of Daily, Weekly, Monthly, Quarterly, Annual Reports.
   Inspection of completed projects of the contractors, finding Non conformities and snags
   Good knowledge in the preparation of Contract data, Specifications chart and cost estimate
   Spare parts specification and inventory management., Technical training to Technicians
   Preparation of Root Cause Failure Analysis Reports, Facility improvement to avoid reoccurrence.
   Ensure the LOTO procedure and use of HSE procedures before commencing the maintenance job.
   Deep knowledge in the maintenance of control system for Waste water plant equipments such as
    Submersible pumps, Screening Mechanisms, Mixing and aeration Blowers, Scraping mechanism for clarifier
    and thickeners, Decanters and Sludge treatment facilities.
   Maintenance of Pumping stations and Primary lift stations
   Preparation of proposals for the up gradation of the plant process and getting approvals.

         ACONTEC, DOHA                             PROJECT ENGINEER                  MAY 2010 ONWARDS

PROJECT : Facilities Maintenance – MEP - of College of the North Atlantic, Qatar.

   Manage facilities management operations of 22 buildings and common grounds for this organization.
   General Management: Staff management, inventory control, purchasing, and management/client relations.
   Technical: HVAC, BMS, electrical, Plumbing, and management of information systems.

         THERMO – STS, DUBAI,                       QA/QC ELECTRICAL ENGINEER                 2006 - 2007

PROJECT: Dubai International Airport Expansion project (Terminal 3)
   Implementation of project quality plans, procedures, Method statements QA/QC practices in the site,
    raising quality observations, NCRs, and inspection & test plans.
   Panel board testing-MDB,ELP, ECB, EPP, EPU etc. and Cable testing, IR.
   Responsible for documents preparation for material submittal, method statement, check list,
   Ensuring that equipments are installed as per specification – prepare as-built drawings, for cable containment
    (electrical, BMS, Networking, SAS)
     KERALA FEEDS, KERALA                          ENGINEER – PRODUCTION & MAINTENANCE           1999 – 2006

PROJECT: Maintenance of Dairy Cattle Feed manufacturing & its WWTP plant ( An ISO 9001 PSU of Govt. of

   Preventive and Breakdown Maintenance of Waste water and Effluent treatment Plant Equipments
   Cattle feed plant and RO plant maintenance and Maintain the history card of Equipments.
   Request for Spare parts and inventory through SAP-Software
   Involved in certification process of ISO 9001, ISO 14001, Knowledge in work permits
   Annual budget preparation, and Utilization of the same in cost effective way .
   Conducting VED(Vital, Essential, Desirable) Analysis for Equipment and plant spare parts
   Responsible for monitoring, operating and maintaining Plant equipments and machineries, Ht & LT installation
    systems, process control instrumentation, generators , transformers, VFD, Soft starter, UPS etc.
   Accountable for planning of preventive maintenance, implementation, analysis, review, production planning,
    control, analysis etc
   Implementation of ISO 9001 / 14001 quality management system, internal auditing etc.
   Successful in implementing TPM concepts
   Analyzing and evaluating electrical parameters and upgrade / modify the plant / equipment performance on
    basis of safety, quality, cost etc
   Upgrading and modification of existing Plant. Preparation of detailed engineering, equipment design and
    factory lay out etc.
   Project coordination, testing and inspection of substation, MCC, Lighting- control and monitoring system,
    Preparation of progress report, Site Inspection and interaction with consultant.

     MALABAR CEMENTS, KERALA                       ELECTRICAL MAINTENNACE ENGINEER               1998 - 1999

   Responsible for operation and maintenance Effluent treatment plant, HT & LT motors, HT & LT Breakers,
    control Board Panel and Thyrister panels etc

                                                   Trainings Attended

    Two week Training on process plant operation and control at PTC institute, Barneveld near Amsterdam,

    Training on Firefighting, confined space entry and CPW ( Common Permit to Work ) by HSE Fire Training
                                               Centre, Rass Laffan

                                               Educational Qualifications

                                   B.Tech (Electrical & Electronics Engineering)
                             (Governmental Engineering College, Thrissur, Kerala, India)
                             Year of passing: 1997 ( 4 Years duration from 1993 to 1997 )
                                            Marks & Grade: 71%, First class
                                         Diploma in Industrial Safety Engineering
                                         (Supervisory Development Centre, Cochin)

                      Date of birth: 10th May 1975; Languages: English, Hindi, and Malayalam
                                                Nationality: INDIAN

To top