SUBCHAPTER B OFFICIAL INSPECTION STATION REQUIREMENTS by wuyunyi

VIEWS: 13 PAGES: 8

									                                                         Subchapter B - Official Inspection Station Requirements

                                                                  station on the premises of an official safety
SUBCHAPTER B                                                      inspection station which has been suspended,
                                                                  if the owner of the suspended station continues
OFFICIAL INSPECTION                                               to conduct any type of business which utilizes
STATION REQUIREMENTS                                              the same access. This prohibition shall not
                                                                  apply if the station and the other business
175.21. APPOINTMENT.                                              each have a separate internal access though
                                                                  sharing a common external access.
(a) Authority - For the purpose of establishing
    a system of official inspection stations, the             (g) Cancellation of Appointments - A certificate
    Bureau will issue certificate of appointment to               of appointment previously issued for a station
    a privately owned facility within this                        which does not comply with the restrictions
    Commonwealth that complies with the                           contained in subsection (e) or (f) will be
    requirements of the Vehicle Code and                          cancelled April 28, 1983.
    this title. An official inspection station is
                                                              175.22. MAKING APPLICATION.
    authorized to inspect vehicles and issue
    official certificates of inspection. See 75 Pa.           (a) Form - The applicant shall file one copy of
    C.S. §4721 (relating to appointment of official               Form MV-427, Application for Designation as
    inspection stations).                                         an Official Inspection Station, with the Bureau.
(b) Certificate of Appointment - The certificate                  A separate application shall be made for each
    of appointment will be issued only when the                   place of business.
    Bureau is satisfied that the station is properly          (b) Bond or Proof of Insurance - Requirements
    equipped and has certified personnel to make                  shall be as follows:
    inspections and adjustments. Only those                        (1) An applicant for a certificate of
    stations fulfilling Department requirements                         appointment shall furnish a bond on a
    and complying with this chapter will be issued                      form prescribed by the Department or
    a certificate of appointment. Prior involvement                     proof of insurance as required by 75 Pa.
    with a suspended inspection station may be                          C.S. §4722 (c) (relating to certificate of
    sufficient cause to deny appointment. The                           appointment).
    certificate of appointment at all times shall
                                                                   (2) The bond or insurance shall be in the
    be conspicuously displayed at the place for
                                                                        amount of $10,000 for each place of
    which it is issued. See 75 Pa. C.S. §4722
                                                                        business and shall provide compensation
    (relating to certificate of appointment).
                                                                        to a vehicle owner for damage their
(c) Certificate Not Assignable - A certificate of                       vehicle may sustain while it is in
    appointment shall be valid only for the person                      possession of the inspection station.
    in whose name it is issued and for transaction
                                                                   (3) The bond or proof of insurance shall be
    of business at the place designated therein.
                                                                        renewed each year.
    A certificate of appointment shall not be
    assignable to another person or location.                      (4) Cancellation of the bond or insurance
                                                                        shall automatically void the certificate
(d) Valid Certificate Required - No person
                                                                        of appointment. Inspections shall cease
    shall in any manner represent a place as an
                                                                        until the Bureau receives a new bond or
    official inspection station unless the station
                                                                        proof of insurance.
    is operating under a valid certificate of
    appointment issued by the Bureau.                         (c) Specification of Type - The application shall
                                                                  indicate the type of inspection station
(e) Inspection Stations With Common
                                                                  authorization applied for; that is,
    Access - No certificate of appointment may
                                                                  Commonwealth, general, fleet, recreational
    be issued for operation by an official safety
                                                                  and utility trailer, or motorcycle.
    inspection station on the premises of another
    official safety inspection station which utilizes         (d) Applicant - The applicant shall be the
    the same access. This prohibition does not                    owner of the business or, in the case of a
    apply if the inspection stations have separate                corporation, some other person specifically
    internal accesses though sharing common                       authorized to sign the application.
    external access.                                               (1) If a natural person, the applicant shall be
(f) Suspended Inspection Stations - No                                  18 years of age or older.
    certificate of appointment shall be issued                     (2) If the applicant is a corporation,
    for operation of an official safety inspection                      partnership or association, the


                                                        B-1               Vehicle Equipment and Inspection Regulations
Official Inspection Station Requirements - Subchapter B

             application shall be signed by an officer,                    stations are exempt from this
             partner, associate or another person                          requirement.
             specifically authorized to sign the                       (3) A current list of certified inspection
             application.                                                  mechanics, Form TS-443.
             (i) The person who signs the application                  (4) An official inspection station sign outside
                 shall be 18 years of age or older.                        the garage, clearly visible to the public.
            (ii) Except in the case of an executive                        This sign shall have a keystone design
                 officer, partner or associate, written                    which is 24 inches high and 21 inches
                 evidence of the authority of the person                   wide. The station number plate shall be
                 –for example, station manager–to                          23⁄4 inches high and 133⁄8 inches wide.
                 sign the application shall be attached                    The background shall be navy blue with
                 thereto and attested to by a partner,                     gold lettering. If hung from a bracket the
                 or a corporation or association officer.                  sign shall be double faced. A previously
                                                                           issued sign will still be permitted. Fleet
  175.23. APPROVAL.                                                        and Commonwealth stations are
                                                                           exempted from this requirement.
  (a) Investigation - An inspection station
      supervisor will conduct an investigation of                 175.25. INSPECTION AREA.
      each applicant to determine full compliance
      with the Vehicle Code and this chapter.                     (a) General - The following requirements apply to
                                                                      inspection areas:
  (b) English Comprehension - The applicant and
      each inspection mechanic shall be sufficiently                   (1) Except as provided in subsection (b)(1)
      versed in the English language to read and                           (iii) and (3), the inspection area shall
      understand this title.                                               be entirely within a sound, enclosed
                                                                           building, shall be in good repair; and
  (c) Issuance of Certificate - Upon approval of
                                                                           shall be kept in good condition.
      the application by the Bureau, a certificate of
      appointment shall be issued to the applicant                     (2) Any anticipated alterations or change
      for the place of business located within this                        affecting the condition or size of the
      Commonwealth, as set forth in the                                    inspection area shall be reported to the
      application. No inspections shall be made                            inspection station supervisor at once.
      unless a certificate of appointment has been                     (3) The floor shall be of a hard surface and
      issued to and is prominently displayed at the                        in sound condition. Dirt floors will not be
      official inspection station.                                         approved.
                                                                       (4) The floor of the inspection area shall be
  175.24. REQUIRED CERTIFICATES
                                                                           level. No more than 1% slope from front
          AND STATION SIGNS.                                               to rear or side to side is acceptable.
  After appointment, the owner of each inspection                      (5) The inspection area shall be free from
station shall prominently display all signs required                       obstructions, including shelves, work
by the Bureau, including the following:                                    benches, partitions, displays, machinery
       (1) A certificate of appointment for each                           and stairways. If the inspection area or
           type of station approved for the location.                      any part is located outside the building,
                                                                           the area shall also be kept clear of snow
       (2) A sign clearly stating the fee for the
                                                                           or other substances which would curtail
           certificate of inspection separate from
                                                                           or interfere with inspections.
           the fee for inspection. The fee for
           inspection shall be the same whether                        (6) Hoists and lifts are permitted in the
           the vehicle passes or fails. The fee                            inspection area if a thorough and proper
           for inspection shall include the cost of                        inspection can be performed.
           labor for the inspection, including pulling            (b) Minimum Requirements - The following
           wheels, but it shall not include the cost                  minimum dimensions apply to inspection
           of parts, repairs or adjustments. The                      areas:
           sign shall clearly indicate the fee for                     (1) Commonwealth, fleet, and general
           different types of vehicles—for example,                        inspection stations:
           passenger cars, trucks, trailers—to the
                                                                           (i) Twelve feet wide by 22 feet long,
           extent that the fee varies among
                                                                                if the station uses an approved
           vehicles. Fleet and Commonwealth
                                                                                headlight aimer or tester.

Vehicle Equipment and Inspection Regulations                B-2
                                                            Subchapter B - Official Inspection Station Requirements

         (ii) Twelve feet wide by 43 feet long, if the                (14) Micrometer gauges or thickness gauges,
              station uses an approved headlight                            with measurements in 1/1000 inch,
              aiming screen.                                                capable of measuring both the range
        (iii) A motor carrier vehicle may be                                of rotor thickness and the depth of the
              inspected either as single unit or in                         scores.
              combination if, in the case of a station                (15) A ball joint gauge - not required for
              meeting the requirements of                                   recreational, utility and motorcycle
              subparagraph (i), the inspection area                         stations.
              has an additional unobstructed length                   (16) A tread depth gauge capable of
              of 42 feet or, in the case of a station                       indicating amount of usable tire tread in
              meeting the requirements of                                   increments of 1/32 inch.
              subparagraph (ii), an additional
              unobstructed length of 21 feet.                         (17) A brake - lining gauge capable of
                                                                            indicating the amount of usable lining
     (2) Motorcycle inspection stations:                                    on both riveted and bonded lining in
          (i) Ten feet wide by 18 feet long, if the                         increments of 1/32 inch.
              station uses an approved headlight                      (18) An approved headlight testing device -
              tester.                                                       SAE approved No. J600a for photo -
          (ii) Ten feet wide by 32 feet long, if the                        electric type and J602c for mechanical
               station uses an approved headlight                           aimers. Not required for recreational and
               aiming screen.                                               utility trailer stations.
      (3) Trailer inspection stations: 12 feet wide                   (19) A paper punch with a minimum
           by 55 feet long.                                                 diameter or width of 1/4 inch and a
(c) Inspections Conducted in the Inspection Area -                          maximum diameter or width of 3/8 inch.
     An inspection shall be conducted entirely                    (b) Discontinued testers - An inspection
     within the inspection area with the exception                    station equipped with discontinued testers
     of the road test.                                                may continue to use them as long as they are
                                                                      in good working order and capable of testing
175.26. TOOLS AND EQUIPMENT.                                          all types of headlights.
(a) General Requirements - An inspection
    station shall have tools and equipment in good                175.27. HOURS.
    operating condition sufficient to inspect each                 An inspection station shall be open for business
    type of vehicle to be inspected, including all of            a minimum of 40 hours, Monday through Friday
    the following:                                               between 7 a.m. and 5 p.m. This section may be
     (1) Hammers - a ball-peen hammer, one                       waived by the Bureau upon written request of the
          plastic or brass hammer and one rubber                 inspection station owner and prior approval of the
          hammer.                                                inspection station supervisor. To be considered
     (2) A workbench.                                            for a waiver of this section, 50% of the working
                                                                 hours shall be between 8 a.m. and 5 p.m., Monday
     (3) A portable light.                                       through Friday. This section does not apply to
     (4) Socket sets.                                            Commonwealth or fleet inspection stations.
     (5) Assorted open end and box end
          wrenches.
                                                                  175.28. CERTIFIED INSPECTION
     (6) Torque wrenches - foot-pound and
          inch-pound.                                                     MECHANICS.
     (7) Screw drivers - assorted.                                (a) General - An official inspection station
     (8) Pliers - assorted.                                           shall have at least one certified inspection
                                                                      mechanic. Every inspection shall be
     (9) Test light - continuity tester.                              performed by a certified mechanic. The
    (10) Floor stands - four.                                         mechanic shall only inspect the type of
    (11) Floor jack or hoist - wheels shall spin freely.              vehicle for which he is certified. The mechanic
    (12) Tire pressure gauge.                                         signing the inspection sticker shall conduct
                                                                      and be responsible for the entire inspection
    (13) Brake drum gauges.                                           of the vehicle, including the road test, except
                                                                      that the Department may exempt a mechanic


                                                           B-3                 Vehicle Equipment and Inspection Regulations
Official Inspection Station Requirements - Subchapter B

      from the requirement to perform a road test               (g) Mechanic License Codes - A mechanic will
      because of a physical disability. See 75                      be issued the following codes for the types of
      Pa. C.S. §4726 (relating to certification of                  vehicle the mechanic is authorized to inspect:
      mechanics).                                                    (1) Passenger cars, trucks 17,000 pounds
  (b) Multiple Stations - A certified inspection                         or less, and trailers less than 10,000
      mechanic may work part time at more than                           pounds.
      one official inspection station if the mechanic                (2) Motorcycles.
      notifies the inspection station supervisor and
                                                                     (3) Trucks over 17,000 pounds, trailers over
      the Vehicle Control Division of the names
                                                                         10,000 pounds, and buses.
      and station numbers of all current employers.
      Failure to do so may result in suspension of                   (4) All vehicles.
      the mechanic’s inspection privileges.                          (5) Codes 1 and 2.
  (c) Number of Inspections - A certified                            (6) Codes 2 and 3.
      mechanic may not inspect more than:                            (7) Codes 1 and 3.
        (1) Two vehicles other than motorcycles                      (8) (Reserved).
            per hour.
                                                                     (9) Electrical speed timing:
        (2) Three motorcycles per hour.
                                                                         (i) Electronic speed timing.
  (d) Certification Requirements - A mechanic
                                                                         (ii) Mechanical speed timing.
      desiring to become certified:
                                                                        (iii) Speedometer.
       (1) Shall be 18 years of age or older.
                                                                        (iv) Electrical-mechanical speed timing.
       (2) Shall have a valid driver’s license
            for each class of vehicle which the                 (h) Mechanic Card - The valid mechanic card
            mechanic will inspect; except that a                    shall be carried by the mechanic when
            certified mechanic who inspects school                  performing inspections.
            buses is not required to hold a Class 4
                                                                175.29. OBLIGATIONS AND
            license but is required to hold a Class
            2 or 3 license. For the purposes of this                    RESPONSIBILITIES
            chapter, a valid driver’s license shall not                 OF STATIONS.
            include a learner’s permit. A mechanic
                                                                (a) Personal Liability - It is the responsibility of
            exempted from the requirement to
                                                                    the owner of an inspection station to do all of
            perform the road test shall also be exempt              the following:
            from the requirement of this paragraph.
                                                                     (1) To conduct the business of the official
       (3) Shall have attended an approved 9-hour                         inspection station honestly and in the
            certification course and successfully                         best interests of this Commonwealth,
            completed the required written                                in accordance with the provisions of
            examination.                                                  the Vehicle Code and this chapter,
       (4) Shall pass the required tactile test                           and, except in the case of a fleet or
            administered by a certified/qualified                         Commonwealth inspection station, to
            automotive instructor at an approved                          make every reasonable effort to inspect
            educational facility.                                         all vehicles upon request.
  (e) Recertification - A mechanic shall be certified                (2) To make official inspection regulations,
      every 3 years by passing the required written                       and supplements available for the use of
      examination within 180 days of receipt of                           certified inspection mechanics and other
      notice from the Department that the mechanic                        employes involved in inspection.
      card is due to expire.
                                                                     (3) To notify the inspection station
  (f) Prior Certification - A mechanic card without                       supervisor and the Vehicle Control
      an expiration date shall remain valid for 180                       Division when a certified mechanic is
      days after the date of notice to the mechanic                       hired.
      to attend the certification course. Failure to
                                                                     (4) To keep current inspection records at the
      complete the certification course and pass the
                                                                          inspection station for examination and
      required tests within 180 days will result in
                                                                          audit by the inspection station supervisor
      cancellation.
                                                                          and other authorized persons.



Vehicle Equipment and Inspection Regulations              B-4
                                                           Subchapter B - Official Inspection Station Requirements

     (5) To keep, for a period of 2 years,                           (1) A Form MV-427 application shall be
           duplicate copies of all garage report                         completed and submitted to the Bureau.
           sheets and certificate of inspection                      (2) An investigation of the premises will
           requisition forms for each inspection                         be conducted by the inspection station
           campaign.                                                     supervisor.
     (6) To assume full responsibility, with or                      (3) Certificates of inspection will be audited
           without actual knowledge, for:                                by the inspection station supervisor and
           (i) Every inspection conducted by an                          shall be retained by the station owner.
               employe of the inspection station.                    (4) No inspections shall be made at the new
          (ii) Every inspection conducted on the                         location until it has been investigated
               premises.                                                 and approved and a new certificate of
         (iii) Every certificate of inspection issued                    appointment issued by the Bureau.
               to the inspection station.                            (5) If the new location is not approved at the
         (iv) Every certificate of inspection issued                     time of the investigation, the inspection
               by the inspection station.                                station supervisor will pick up all current
                                                                         certificates of inspection and will retain
          (v) A violation of the Vehicle Code or                         them until the new location is approved.
               this chapter related to inspections
               committed by any employe of the                  (d) Discontinuance of Business - Inspections
               inspection station.                                  shall be discontinued in any of the following
                                                                    circumstances:
     (7) To assure that each inspection is
           performed by an inspection mechanic                       (1) If the owner vacates, abandons or
           certified to inspect that type of vehicle.                     discontinues the inspection business.
                                                                          Immediate notice shall be provided to
     (8) To have available, at all times, a current                       the Bureau and the inspection station
           certificate of inspection for all types of                     supervisor. The inspection station
           vehicles inspected at that station.                            supervisor will pick up the certificate of
(b) Change of Ownership - The following apply                             appointment, and all certificates of
    to change of ownership:                                               inspection, records and other inspection
      (1) In the case of any change of ownership,                         materials and return them to the Bureau.
           the certificate of appointment, all                       (2) If the owner is deceased. If a member of
           unissued certificates of inspection, and all                   the family or partner wishes to continue
           inspection material shall be surrendered                       the business, a new application for
           immediately to the inspection station                          appointment shall be submitted to the
           supervisor. The new owner shall submit                         Bureau.
           a Form MV-427 application to the                          (3) If the owner voluntarily discontinues
           Bureau. An investigation of the premises                       the operation of an inspection station,
           will be conducted by the inspection                            the owner shall immediately notify the
           station supervisor.                                            inspection station supervisor. Remaining
     (2) In the following circumstances, it shall                         inspection materials shall be returned to
           not be necessary to surrender unissued                         the inspection station supervisor.
           certificates of inspection; however, no              (e) Notice Required - The following events shall
           inspections shall be conducted until the                 be reported at once to the inspection station
           new ownership has been approved and                      supervisor and the Bureau; however, it is not
           a new certificate of appointment issued:                 necessary to discontinue inspections:
           (i) Creation, modification or termination of              (1) Whenever certificates of inspection are
               a partnership.                                             damaged, lost or stolen.
          (ii) Incorporation of a business.                          (2) Whenever a certified mechanic or
         (iii) Transfer of the controlling interest in                    a person authorized to purchase
               a corporation.                                             certificates of inspection is dismissed
         (iv) Transfer of ownership to a spouse,                          or resigns.
               child or parent.                                      (3) A change in the post office address of
(c) Change of Location - In the case of a                                 an inspection station, not location. The
    change of location of an inspection station, all                      change shall be reported at once on
    of the following apply:                                               Form MV-427.


                                                          B-5                Vehicle Equipment and Inspection Regulations
Official Inspection Station Requirements - Subchapter B

        (4) A change of the company name, not                                (ii) A statement indicating that the fee for
             ownership. The change shall be reported                              affixing a new certificate of inspection
             at once on Form MV-427.                                              which shall be charged upon the
        (5) When a person who signed the Form                                     return of the vehicle for the new
             MV-427 application for a corporation is                              certificate of inspection to be affixed.
             no longer in charge of the inspection                                This fee shall be no greater than
             station.                                                             the posted fee for the certificate of
                                                                                  inspection as required by Section
             (i) A new Form MV-427 shall be                                       175.24(2) (relating to required
                 submitted to the Bureau at once.                                 certificates and station signs).
            (ii) A new letter of authority is required for
                 the person signing the Form MV-427.               175.30. COMMONWEALTH
        (6) Whenever a person, whose signature is                          INSPECTION STATIONS.
             on the signature card, Form MV-417,                   (a) Eligibility - This designation will be issued to
             resigns or is relieved of inspection                      stations owned and operated by:
             responsibilities, the owner shall request
             new signature cards from the Bureau at                     (1) The Federal Government.
             once. Upon receipt of new cards, the old                   (2) The Commonwealth.
             cards shall be returned to the Bureau.                       (3) A political subdivision of the
  (f) Customer Relations - The garage owner shall                              Commonwealth.
      consult the vehicle owner for permission to                  (b)   General Requirements - An applicant for
      make repairs.                                                      a Commonwealth inspection station shall
       (1) The permission may be established                             meet the requirements of this chapter, unless
           at the time the vehicle is brought to                         specifically exempted, including the specific
           the station for inspection or after it is                     requirements for fleet stations.
           determined the repairs are needed.                      (c)   Certified Inspection Mechanic - Each official
       (2) The vehicle owner shall be allowed to                         Commonwealth inspection station shall have
           make his own repairs or to select anyone                      at least one inspection mechanic certified
           else he desires to do them for him.                           to inspect each type of vehicle which will be
       (3) A part replaced as a result of                                inspected.
           inspection shall be retained until the                  (d)   Method of Inspection - A Commonwealth
           vehicle is returned to the customer. The                      inspection station shall inspect and issue
           customer shall have the right to examine                      certificates of inspection only to vehicles
           all replaced parts.                                           registered in the name of the governmental
       (4) The vehicle owner shall be informed in                        body.
           writing on the repair order of any parts                (e)   Certificates of Inspection - No fee shall
           which, although in passing condition,                         be charged for certificates of inspection
           the mechanic believes may become                              requisitioned by Commonwealth inspection
           dangerous before the next inspection                          stations.
           period. The brake and tire readings shall
           be indicated in writing on the repair
           order. If a temporary inspection approval               175.31. FLEET INSPECTION
           indicator is issued, the repair order shall                     STATIONS.
           also contain the following information:
                                                                   (a) Eligibility - Eligibility requirements are as
           (i) A statement which specifies that                        follows:
               failure to return the vehicle displaying
               a renewed emission certificate of                        (1) A fleet inspection station owner shall
               inspection to the station prior to the                        own or lease at least 15 or more
               expiration of the safety certificate of                       vehicles.
               inspection shall void the temporary                      (2) The certificate of appointment shall
               inspection approval indicator and                             authorize inspection of only those
               necessitate a complete reinspection                           vehicles registered or leased by the
               of the vehicle for which a fee may be                         fleet inspection station owner. Privately
               charged.                                                      owned or registered vehicles of company



Vehicle Equipment and Inspection Regulations                 B-6
                                                        Subchapter B - Official Inspection Station Requirements

          officers and employes may not be                   175.33. MOTORCYCLE INSPECTION
          inspected at a fleet inspection station                    STATIONS.
          even if they are used for business
          purposes.                                          (a) Eligibility - This designation shall be issued
                                                                 to stations that inspect only motorcycles.
     (3) The inspection certificate shall be
          cancelled if the number of vehicles                (b) General Requirements - A motorcycle
          owned or leased falls below 15, except                 inspection station shall meet all requirements
          for a temporary delay in ordering or                   of this chapter, unless specifically exempted.
          receiving additional vehicles to                   (c) Certified Inspection Mechanic -
          supplement the fleet.                                  A motorcycle inspection station shall have
(b) Certified Inspection Mechanic - Each fleet                   a mechanic certified to inspect motorcycles
    inspection station shall have at least one                   present during normal business hours.
    inspection mechanic certified to inspect each            (d) Record Sheets - All motorcycle inspections
    type of vehicle which will be inspected.                     shall be recorded on Form MV-431.
(c) Requirements - Requirements shall include                (e) Tools - In addition to the tool requirements
    the following:                                               of §175.26 (relating to tools and equipment),
     (1) An applicant for a fleet inspection                     a motorcycle station shall have the following
          station shall meet the requirements                    additional tools:
          of this chapter, unless specifically                    (1) A spoke wrench.
          exempted.
                                                                  (2) A truing stand.
     (2) In addition to the minimum inspection
                                                                  (3) A photo-electric type aimer or approved
          area requirements of §175.25 (b)(1)(i)
                                                                       headlight aiming screen.
          (relating to inspection area), the
          inspection area shall be large enough to           (f) Exemption - A motorcycle station is not
          accommodate the largest vehicle to be                  required to have floor jacks or a floor stand.
          inspected at the fleet inspection station.         175.34. GENERAL INSPECTION
175.32. RECREATIONAL AND                                             STATIONS.
        UTILITY TRAILER                                      (a) Eligibility - This designation will be issued to
        INSPECTION STATIONS.                                     stations that inspect all vehicles if the station
                                                                 is so equipped.
(a) Eligibility - This designation shall be issued
                                                             (b) General Requirements - An applicant for
    to stations that inspect trailers.
                                                                 a general inspection station shall meet
(b) Requirements - An applicant for a trailer                    the requirements of this chapter, unless
    station shall meet the requirements of this                  specifically exempted.
    chapter, unless specifically exempted.
                                                             (c) Certified Inspection Mechanic - Each
(c) Certified Inspection Mechanic - Each trailer                 general inspection station shall have a
    inspection station shall have a mechanic                     certified mechanic present during normal
    certified to inspect trailers present during                 business hours.
    normal business hours.
                                                             (d) Method of Inspection - All vehicles shall
(d) Record Sheets - Inspections of trailers shall                be inspected according to this chapter by a
    be recorded on Form MV-480. Inspection                       mechanic certified to inspect the appropriate
    of recreational trailers shall be recorded on                class of vehicle.
    separate Form MV-480 report sheets.
(e) Tools - In addition to the tool requirements
    of §175.26 (relating to tools and equipment),
    trailer stations shall have an ammeter–low
    range type.




                                                       B-7                Vehicle Equipment and Inspection Regulations
Notes


                                               NOTES

______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________


______________________________________________________________________________________

Vehicle Equipment and Inspection Regulations

								
To top