MANUALE GPS BOX by kMd55I68

VIEWS: 6 PAGES: 25

									Catalogue

1 Feature ...................................................................... 2
2 Specification ................................................................ 4
3                                                                  Install                                                                     Instruction
.............................................................................................................................................................. E
rror! Bookmark not defined.2
4                                      Navigation                                            Software                                             Request
............................................................................... 1
5
5                                      Navigation                                            Software                                             Install
............................................................................... 1

                                                                                                                                                             1
6
6                                                                     Other                                                                         features
............................................................................... E
rror! Bookmark not defined.5
7                                                                                                                                               Attentions
..............................................................................................................................................................

Error! Bookmark not defined.6




2
Feature
       -high integration, ultra-small size (100mm * 50 mm * 20 mm), to integrate with   single-and
double-DIN DVD easily.
  Support3 kinds of video output formats, can output RGB, YC, CVBS video, the resolution can be
customized.
                                       is 320 * 240 (can also be customized by the customer s
requirements), PAL, NTSC output.can be choosed, Brightness, contrast, chroma, saturation can be set
up.
               resolution is 480 * 234 (can also be customized by the customer s requirements), and
the brightness and contrast can be adjusted.
  Superior adaptability: shows the size of regulation, showing adjustable position.
                                                                                                  3
    Support 2-channel high quality audio output ,can link with car DVD /AV (AUDIO AND VIDEO)
directly.
    Can be smooth playback of multimedia files MP3/MP4
    Support for text reading, image viewer.
    Support voice navigation feature priority (when customer watching DVD ,the auto-play navigation
voice will appears if the navigation is prompted).
    Keys / Remote control / Touch screen operation. Support the flexible touch-screen operation, can
be easily integrated and share a car DVD touch screen.
     Selected SiRF STAR III ultra-high sensitivity GPS receiver module can be extremely weak signal
accurate positioning of the circumstances
     Support for SD card storage navigation software or multimedia files (support for high-speed

4
SDHC card, the maximum is 32GB)
  Support for USB storage devices to store navigation software or multimedia files



 ( Specification)

                                          System parameters
           Frequency                     400MHZ

           CPU                           SAMSUNG S3C2440A-40

           SDRAM                         64MB

           ROM                           64MB

          Software storage               SD card/USB storage devices

                                                                                     5
        Operating system     WINCE5.0 NET
        Audio type           MP3/PCM/WMA

        Video type           ASF/AVI/WMV/DIVX
        Video decoding       QVGA >25 frame /S
        Software edit type   ARMV4




                              Basic parameters
        Video output type     Composite video / analog RGB (switch selection)
    Video output voltage      1.0Vpp/75 Europe


6
    Resolution                320*240(YC/CVBS)or 480*234(RGB)
     Voice output         Double track stereo CD tone
    Voice power               Double track 0.25W/CHANEL
    Weight                    About 100g
    Size                      100mm*50 mm *20 mm

    Working temperature       -20℃ to +75℃

    Storage temperature       -40℃ to +80℃
    Working storage           45% to 80%

    Storage humidity          30% to 90%

Operating Voltage             DC 12V


                                                                7
    Average            power        2W
    consumption
        ACC        ineffective      <50mW
    power consumption




                                      GPS parameters

    chipset                      SiRF Star III

        Frequency                1.575GHZ

        C/A CODE                 1.023 MHZ chip rate


8
    Channel            20-channels
    Tracking             -159dBm
sensitivity
   Positioning           10m, 2D RMS
   accuracy              5m, 2D RMS, WAAS enable

   Rate of speed         0.1m/s

  Data update rate       1HZ

 Re-acquisition time     average 0.1s
  Maximum                18,000m
positioning height


                                                   9
       Maximum rate        515m/s

        Acceleration       < 4g

        GPS antenna type   Active external ceramic antenna

        Antenna gain       27dB

         Antenna           3.3V±5%
     voltage
         Antenna current   15mA

     Antenna               SMA male (with stria + pin)
      interface type



10
Installation   instructions
Appearance and size
      External Interface Description
      (1)        Use of needle VGA15 interface, pin definition is as follows:



                                          5←1

                     10←6


                                        15←11                                   11
     Pin   Type       Description   Pin   Type         Description
      1    OUT    CVBS/Blue          9    I/O    TSXM/RXD

      2    OUT    Y/Red             10    I/O    TSXP

      3     /     /                 11    OUT    Audio-L

      4    I/O    TSYM/TXD          12    GND    GND

      5    I/O    TSYP              13    GND    GND

      6    OUT    Audio-R           14     IN    ACC

      7    OUT    C/Green           15     IN    BATT+ 12V


12
        8       OUT      HSYNC                    APEARANCE       GND   GND


Data line interface are defined as follows:




                                                  5
                                       3                      7    8
                                  2           4       6
                            1


                                                                              13
 NO.     Type                               Description
     1    /     4-wire resistive touch screen communication line. See Schedule 2
     2    /     video signal line group. See Schedule 1
     3    IN    ACC, red
     4   GND    GND,Black

     5    IN    BATT, yellow
     6   OUT    Video, yellow (only effective in YC mode)
     7   OUT    Audio-R, white
     8   OUT    Audio-L,red



14
See Schedule 1 (the number on the map by a number of directions from the left)


       NO.      Type                               Description
        1         /      NC

        2       OUT      Sound control

        3         /      GND

        4       OUT      HSYNC,composite sync signal (RGB mode only effective
        5       OUT      CVBS/Blue(1.0Vpp/75 Europe)

        6       OUT      C/Green(1.0Vpp/75 Europe)


                                                                                 15
         7      OUT      Y/Red(1.0Vpp/75 Europe)


See Schedule 2 (serial number on the map by a number of directions from the left)


        NO.     Type                               Description
         1      I/O      TSXP(touch communication)
         2      I/O      TSYP(touch communication)
         3      I/O      TSYM/TXD(touch communication)

         4      I/O      TSXM/RXD(touch communication)



     Four Software request
16
 Use the version wince.net 5.0 CORE for the oprating system.
 The type of navigation software compile is ARMV4, please contact with us if you need
SDK.
                                               please provide us the remote
control code and the corresponding of navigation software code value.

Five Software Install


settings need to set the path of navigation software.
   As the follow picture:


                                                                                   17
18
equipped with navigation software to insert the SD card (called the path: \ storagecard \)
or U disk (called the path: \ USBHD \) your own navigation software configuration
changes).


in the YC / CVBS output at 320 * 240; RGB output for 480 * 234.




                                                 File icon to select navigation applications
(the EXE file extension), select the following can also select "start navigation software
automatically" option, the system directly after running navigation software.
  Click the “Select” button to enter into the main menu.
                                                                                          19
 Click the”Navigation ”button to set up the navigation software path.
Other features of the six navigation devices for use
     As the following chart:




一    Other functions

  As the following chart:




20
21
     :Click the “Select” button to enter into the main menu.

     the”Navigation ”button to set up the navigation software path.




                             wsing.




                     eft corner, click, do not close the current window and return to
22
the main menu.


            -click to open the main menu settings.
                                                                                             igation
software.




     


                        :Click the “Touch screen”button,enter into the touch panel correction

            interface,follow the image guidance ,press the cursor center until the cursor move to the

                                                                                                  23
           upper left corner, then the lower right corner, then the upper right corner. If the
           correction is un successful, it will regulate again automatically, if it is successful, then
           the screen is show “OK”,and you just need to click any place of the screen to save the
           correction ,the exit the touch panel correction interface .After the correction, the system
           will memorize the correction interface result automatically, when power off , it won’t be
           lost , when power on , it doesn’t need to regulate every time . The correction will be
           finished well before ex-work.
          Attention




placed in the vehicle
24
otherwise easily lead to system crashes.
                                    er was orange, check the yellow icon, after the whole.




                                                                                        25

								
To top