Download the Erector Demonstration by 66pgoq

VIEWS: 0 PAGES: 17

									 Here Tools Do You Use
What Is Your Tool Box To Erect
The Building?
Bringing the 3D Model to your Toolbox




         Click on your Toolbox to See What else is Inside   Exit
                                             Don’t Forget to Visit us at www.tekla.com
Tekla Structures is a 3D Solution used by
Structural Engineers, Steel Detailers, Steel
Fabricators, and General Contractors world wide.
                                                                         Exit

It Can be used by you too!

           Where Does the Model
           Come From?

            Avoid Erection Problems


           Stay On Schedule
Click The Links Above for More Information
                                             Don’t Forget to Visit us at www.tekla.com
Tekla Structures is a 3D Solution used by
Structural Engineers, Steel Detailers, Steel
Fabricators, and General Contractors world wide.
                                                                            Exit



           Where Does the Model
           Come From?

            Avoid Erection Problems


           Stay On Schedule

Click The Links Above for More Information
Where Does the Model Come From?
 WhoCan Even Send CommentsYou?
 You Creates that3D Model? to & Project Status back
  First Let’s Introduce theGet
    How Does the Model Players                                          Go Back



                                                           You Don’t Build The
Structural Engineer   General Contractor                   3D Model, you utilize
                                                           it’s Information
                                           Steel Erector
   Steel Detailer     Steel Fabricator
                                                Are my Projects Modeled
                                                in Tekla Structures?
                                      might get the model from the Steel
                                  You Visually show erection progress,
                                      erectability the Fabricator,
                                                Click Here and Projects
                                  Detailer directly,issues,to Seefieldor even the
                                                Detailed, Fabricated, and Erected
                                      discrepancies, depending on how the
                                  General Contractorback to the fabricator,
                                                with Tekla Structures
                                      detailer, and contractor.
                                  contract is organized.
Global Projects
                                                                                         Go Back




These are some of the prestigious projects done in Tekla Structures.
However a large portion of our user base is smaller to mid size
companies, and Tekla Structures is used on projects ranging from       -Hillside Community Church, CA
                                                                       -Steel Tech Industrial Corp.
grocery stores and canopies to stadiums and skyscrapers.
                                                                                       Go Back




                                                          “My detailing department supplies me with a
                                                          Tekla model before starting each job so that I
                                                          can review the conditions and prepare erection
                                                          sequences even before I hit the jobsite”




- Steve Rodriguez, Erection Superintendent
“Ever since I started using the Tekla viewing station
on my laptop in the field, I am able to check
dimensional design information versus the actual
field conditions clarifying many complicated
areas and solving most unanswered questions”

  Featuring:
                                                        - Hillside Community Church, Alta Loma, California
 Avoid Erection Problems
                                                      Go Back
       Review Connections and Assemblies in 3D

       Review Safety Cable and Tie Off Requirements

       Discover Clearance & Installation Issues


       Visually Communicate Erectability Issues

Click The Links Above for More Information
Review Connections &
Assemblies in 3D                                                     Go Back




The Erector Can Query the Assembly to see which parts are shop bolted
and welded together vs. being field installed. In this case the Erector can
verify the detailer shop attached the bent plate pourstop (bright yellow) to
the top of the beam. He can also see the gusset plates were shop attached
to the beam and then they will be field bolted to the column.
Review Safety Requirements
• The Erector can clearly      Go Back
see the detailer applied the
appropriate Safety Cable
holes in the column.
• He can also see that a
closure plate will be
required where the bent
plate pourstop wraps
around the column.

• Safety Tie off holes on
the beam flanges can
be verified as well
Discover Clearance & Installation
Issues                              Go Back
Visually Communicate Erectability Issues               Go Back




The 3D Model makes it easier to illustrate
installation issues
The Erector can Markup and Colorize the model to
show problem areas that may need to be fixed in
detailing before fabrication, as well as identifying
field discrepancies during erection.
Visually Schedule, Plan, and Track
the Project                        Go Back

        Plan Erection Sequences and Site Equipment
        Locations

       Visually Plan Truck Loads

        Track and Animate Deliveries and Erection Progress

        Report Assembly Weights and Center of Gravity

Click The Links Above for More Information
Plan Erection Sequences and Site
Equipment Locations                          Go Back
                         Reference in Cranes, Trucks,
                                        Define, Show,
                         Generators, etc. Anitmate
                                        and
                                        Sequences by
                                        Color &
                                        Transparency
Track and Animate Deliveries and
Erection Progress                  Go Back
Report Assembly Weights and
Center of Gravity                              Go Back




Query the Center of Gravity on Asymmetrical
Assemblies for Crane Choke Point and Lifting
Lug Placement. Also Generate Push of the
button reports with Assembly Weight, Length,
and Dimensions to review lift capacities.
Visually Plan Truck Loads                              Go Back




Define the maximum truck capacity and select the
assemblies to group in each truck load. A report can
then be run for the shop and shipping to accurately
organize fabrication and delivery.

								
To top