LC-32A66M LC-37A66M LC-42A66M LC-46A66M by pengxiang

VIEWS: 5 PAGES: 64

									                        中文 (繁體)
LC-32A66M




                          ENGLISH
LC-37A66M
LC-42A66M
LC-46A66M
液晶彩色電視機
LCD COLOUR TELEVISION

使用說明書
OPERATION MANUAL
                                  OPERATION MANUAL                                                                                 ENGLISH


Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.

Contents




                                                                                                                                                    ENGLISH
    Introduction
           Dear SHARP customer ................................................................................................ 1
           Contents ....................................................................................................................... 1
           Important Safety Precautions ..................................................................................... 4
           Supplied accessories .................................................................................................. 5
           Trademarks .................................................................................................................. 5
    Preparation
           Attaching the stand ..................................................................................................... 6
           Part names ................................................................................................................... 7
                    TV (Front/Side) ................................................................................................. 7
                    TV (Rear) ........................................................................................................... 8
                    Remote control unit.......................................................................................... 9
           Before turning on the power ..................................................................................... 10
           Connecting external devices .................................................................................... 11
                    Connecting a VCR, game console or camcorder .......................................... 11
                    Connecting a DVD player ............................................................................... 11
                    Connecting a Digital TV Decoder (Set Top Box) ............................................ 12
                    Connecting a PC ............................................................................................ 12
                    Using Digital Audio Output ............................................................................ 12
           Inserting the batteries ............................................................................................... 13
           Using the remote control unit ................................................................................... 13
                    Cautions regarding the remote control unit ................................................... 13
           Turning the TV on/off................................................................................................. 14
                    Turning on the power ..................................................................................... 14
                    Turning off the power ..................................................................................... 14
           Initial auto installation .............................................................................................. 14
           About Menu operations ............................................................................................. 15
                    What is Menu? ............................................................................................... 15
                    Basic Menu operations .................................................................................. 15
                    About Guide Display ...................................................................................... 15
                    TV/AV input mode menu items ...................................................................... 16
                    PC input mode menu items ........................................................................... 17
    Watching TV
           Setting channels automatically ................................................................................ 18
           Selecting programmes .............................................................................................. 19
           Adjusting the volume ................................................................................................. 19
           Menu language settings ............................................................................................ 19
           Setting channels to your preference........................................................................ 20
                   Auto search .................................................................................................... 20
                   Manual setting for each channel .................................................................... 20
                   Sorting programmes ...................................................................................... 23
                   Erasing programmes ...................................................................................... 23
           Useful viewing functions ........................................................................................... 24
                   Split-screen viewing ...................................................................................... 24
                   Returning to the previously selected channel ................................................ 25
                   Muting the audio temporarily ......................................................................... 25
                   Outputting only audio..................................................................................... 25
                   Switching the analogue audio format ............................................................ 26


                                                                                                                                                1
Contents


    Watching TV (Continued)
                   Reducing the start-up time ............................................................................ 26
                   Password setting for the child lock (for TV input mode) ................................ 27
           Energy conservation settings ................................................................................... 28
                   Auto power-off at a designated time ............................................................. 28
                   Auto power-off after the end of broadcast .................................................... 28
                   Auto power-off when there are no operations performed ............................. 28
                   Power Management ....................................................................................... 29
                   Ecology .......................................................................................................... 29
           Picture size settings .................................................................................................. 30
                   Selecting the Wide Screen Signalling (WSS) picture size automatically ........ 30
                   Selecting the Wide Screen Signalling (WSS) picture size manually ............... 30
                   Selecting the picture size manually ................................................................ 31
           Selecting a preset AV Mode...................................................................................... 32
           Manual picture settings............................................................................................. 33
                   Picture adjustment ......................................................................................... 33
                   Advanced picture settings ............................................................................. 34
           Other picture settings................................................................................................ 35
                   Adjusting the image position.......................................................................... 35
                   Game Play Time ............................................................................................. 35
           Audio adjustment ....................................................................................................... 36
                   Output Volume Select ................................................................................... 36
    Settings when using external devices
           Settings when using HDMI output devices ............................................................. 37
           Selecting the input source and signal type ............................................................. 38
                   Selecting input source ................................................................................... 38
                   Selecting input signal type ............................................................................. 38
           Labelling input sources ............................................................................................. 39
           Skipping HDMI/RGB input ........................................................................................ 39
           Colour system settings ............................................................................................. 39
    AQUOS LINK
           Controlling HDMI devices using AQUOS LINK ...................................................... 40
           AQUOS LINK connection ......................................................................................... 41
                   Connecting an AQUOS BD Player via the AQUOS LINK-compatible
                      audio system ............................................................................................ 41
                   Connecting an AQUOS BD Player only......................................................... 41
           AQUOS LINK Setup .................................................................................................. 41
                   AQUOS LINK Auto power on ........................................................................ 41
                   Selecting recorder ......................................................................................... 42
           Operating an AQUOS LINK device .......................................................................... 42
                   Listening with the AQUOS LINK-compatible audio system .......................... 42
                   Listening with the AQUOS TV speaker system ............................................. 43
                   Manually changing the AQUOS LINK-compatible audio system’s sound
                      mode......................................................................................................... 43
                   Calling up the menu of an external device connected with the TV via
                      HDMI.......................................................................................................... 43
                   Playback of titles using AQUOS LINK........................................................... 43
                   Selecting media type for CEC-compatible recorder ..................................... 44
                   HDMI device selection .................................................................................. 44
                   Recording via the CEC-compatible recorder’s EPG (only for recorders)...... 44
    Connecting a PC
           Displaying a PC image on the screen ...................................................................... 45
                   Selecting the picture size ............................................................................... 46
                   Adjusting the PC image automatically ........................................................... 47
                   Adjusting the PC image manually .................................................................. 47
           Input resolution settings ........................................................................................... 48
                   Selecting the input resolution......................................................................... 48


2
Contents


   Connecting a PC (Continued)
           PC Control of the TV .................................................................................................. 49
           PC compatibility chart ............................................................................................... 50
           RS-232C commands list ............................................................................................ 50
   Teletext function
           About Teletext ............................................................................................................ 51
           Displaying Subtitles ................................................................................................... 52
           Displaying Subpages ................................................................................................. 52
           Teletext language setting.......................................................................................... 53
   Appendix
           Troubleshooting ......................................................................................................... 54
           Error messages about recording using AQUOS LINK ........................................... 55
           Reset ........................................................................................................................... 56
           Identification .............................................................................................................. 56
           Specifications............................................................................................................. 57
           Optional accessory ................................................................................................... 57
           Dimensional drawings ............................................................................................... 58
           Mounting the TV on the wall .................................................................................... 60
                    Removing the stand ...................................................................................... 60
                    Handling and precautions with the wall-mounted TV ................................... 61
           CLEARING THE PASSWORD .................................................................................... 62




                                                                                                                                                  3
Important Safety Precautions
• Cleaning — Unplug the AC cord             • The LCD panel used in this product
  from the AC outlet before cleaning          is made of glass. Therefore, it can
  the product. Use a damp cloth to            break when the product is struck
  clean the product. Do not use liquid        forcefully or with a sharp object. If
  cleaners or aerosol cleaners.               the LCD panel is broken, be careful
                                              not to be injured by broken glass.
• Water and moisture — Do not use
  the product near water, such as           • Heat sources — Keep the product
  bathtub, washbasin, kitchen sink,           away from heat sources such as
  laundry tub, swimming pool and in a         radiators, heaters, stoves and other
  wet basement.                               heat-generating products (including
                                              amplifiers)
• Do not place vases or any other
  water-filled containers on this product.   • To prevent fire, never place any type
  The water may spill onto the product        of candle or naked flames on the
  causing fire or electric shock.              top or near the TV set.



• Stand — Do not place the product
  on an unstable cart, stand, tripod        • To prevent fire or shock hazard, do
  or table. Doing so can cause the            not place the AC power cord under
  product to fall, resulting in serious       the TV set or other heavy items.
  personal injuries as well as damage
  to the product. Use only a cart,
  stand, tripod, bracket or table
  recommended by the manufacturer
                                            • Do not place heavy objects on this
  or sold with the product. When
                                              product or stand on it. Doing so
  mounting the product on a wall, be
                                              could cause injury if the product
  sure to follow the manufacturer’s
                                              overturns. Take special care near
  instructions. Use only the mounting
                                              children and pets.
  hardware recommended by the
  manufacturer.


• When relocating the product
  placed on a cart, it must be moved
  with utmost care. Sudden stops,
  excessive force and uneven floor
  surface can cause the product to fall     The LCD panel is a very high technology product
  from the cart.                            with 2,073,600 pixels, giving you fine picture details.
                                            Due to the very large number of pixels, occasionally
                                            a few non-active pixels may appear on the screen
• Ventilation — The vents and other
                                            as a fixed point of blue, green or red.
  openings in the cabinet are designed
  for ventilation. Do not cover or block    This is within product specifications and does not
  these vents and openings since            constitute a fault.
  insufficient ventilation can cause
  overheating and/or shorten the life       Precautions when
  of the product. Do not place the
                                            transporting the TV
  product on a bed, sofa, rug or other
                                            • When transporting the TV, never
  similar surface, since they can block
                                              carry it by holding or otherwise
  ventilation openings. This product is
                                              putting pressure onto the display.
  not designed for built-in installation;
                                              Be sure to always carry the TV
  do not place the product in an
                                              by two people holding it with two
  enclosed place such as a bookcase
                                              hands — one hand on each side
  or rack, unless proper ventilation
                                              of the TV.
  is provided or the manufacturer’s
  instructions are followed.
                                            • Do not display a still picture for a long time, as this could
                                              cause an afterimage to remain.

                                            • Install the product on the place where the AC cord can
                                              be unplugged easily from the AC outlet, or from the AC
                                              INPUT terminal on the rear of the product.




4
Supplied accessories
Make sure the following accessories are provided with the product.


          Remote control unit                 “AAA” size battery (g2)                              AC cord




                                                                                                  * only for LC-46A66M




      Used with batteries inserted.                                                 Always use the AC cord supplied with
                                                                                    the TV.
                Page 9                                Page 13                                      Page 10

              Cable clamp                                                  Stand unit

                                      LC-32A66M/LC-37A66M




                                              Stand base                                   Screws (g8)



                                              Stand post
          For bundling cables.
                Page 10                  Put all parts of the stand unit together and then attach it to the TV. Page 6

           Operation manual                                                Stand unit

                                      LC-42A66M/LC-46A66M




                                            Stand base               Short screws (g4)
                                                                                                  Long screws (g4)


                                           Stand post                     Hex key

                                       Put all parts of the stand unit together and then attach it to the TV. Page 6




Trademarks
• TruSurround XT, SRS and h® symbol are trademarks of SRS Labs, Inc.
  TruSurround XT technology is incorporated under license from SRS Labs, Inc.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
  Licensing LLC.”


                                                                                                                           5
Preparation
    Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
  damaged.

   CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

        Confirm the 8 screws supplied with the TV.                        1 Insert the stand into the openings on the
    1                                                             3        bottom of the TV.
          LC-32A66M/LC-37A66M
          Short screws (g4) Short screws (g4)                            2 Insert and tighten the 4 short screws into
          (used in step 3)  (used in step 2)                               the 4 holes on the rear of the TV.
                                                                             LC-32A66M/LC-37A66M
                                                                                                       Soft              Screw
                                                                                                       cushion           driver
            LC-42A66M/LC-46A66M
                                                                                                                         (not supplied)
            Short screws (g4)      Long screws (g4)                                                        2
            (used in step 3)       (used in step 2)
                                                                                                                         Screw
                                                                                                 1




                                                                             LC-42A66M/LC-46A66M
        Attach the supporting post for the stand unit
    2   onto the base as shown below.                                                                          Hex key

         LC-32A66M/LC-37A66M                   Screw                                                           Short screw
                                               driver
                                               (not supplied)
                   Screw

                                                                                                               Soft
                                                                                                               cushion




                                                                   NOTE
         LC-42A66M/LC-46A66M                                    • To detach the stand, perform the steps in reverse order.
                            Long screw
                                                       Hex
                                                       key
                                                                                                                             15°


                                                                                                                             15°


                                                                   CAUTION
                                                                • Adjust the screen with both hands. Put one hand on
                                                                  the TV and rotate the screen while steadying the stand
                                                                  with your other hand.
                                                                  The TV can be rotated up to 15 degrees to the right or left.




6
Preparation

 Part names

 TV (Front/Side)




                                                                                       POWER (On/Off) button


                                                                                       MENU button


                                                                                       TV/VIDEO button


                                                                                       Channel up (r)/down (s) buttons



                                                                                       Volume up (e)/down (f) buttons




                            Remote control sensor                                        OPC indicator*


                                              OPC sensor                       POWER indicator**



                                                                                    *OPC: Optical Picture Control (See page 33.)
                                                                                    ** See page 14 for the TV status indicator.

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-42A66M.

                                                                                                                                   7
Preparation

    TV (Rear)




                                                                                                           AC INPUT terminal
INPUT 3 (HDMI)
terminal




         INPUT 4
         terminals



Headphone jack
                                                                                                           SERVICE ONLY
                                                                                                           terminal*

                       INPUT 2 (HDMI)
                              terminal                                                                     INPUT 1 (HDMI)
                                                                                                           terminals
                     RS-232C terminal                                                                     INPUT 7 (PC) terminals




                                                                                                           Antenna input
                                                                                                           terminal
                      MONITOR OUT
                      terminals




                                                            INPUT 5 terminals

                                                INPUT 6 terminals         DIGITAL AUDIO OUTPUT terminal




    *Usually do not connect anything to this terminal as it is reserved only for service personnel.




    Regarding the headphone jack
    • Use headphones with a stereo mini plug (Ø 3.5 mm).                    Volume display when headphones are plugged in
    • Be sure to unplug headphones from the jack when they are not
      in use.
    • The speakers do not output volume when headphones are
      plugged in.
    • The “Audio” menu cannot be operated when headphones are                                                20
      plugged in.
    • You can set the volume to different levels for each input source.


8
Preparation

    Remote control unit
                                                              7    VOLk/VOLl
                                                                   Set the volume. (See page 19.)
                                                              8    e (Mute)
       1                                              13           Mute the sound. (See page 25.)
                                                              9    P&P
                                                                   Set the split-screen picture mode. Press P&P again to
                                                                   return to normal view. (See page 24.)
                                                              10   SURROUND
       2                                                           Select SRS TS XT settings. (See page 36.)
                                                              11   EXIT
                                                                   Return to the default screen.
       3                                              14      12   AQUOS LINK buttons
                                                                   If external equipment such as a AQUOS BD Player
                                                      15           is connected via HDMI cables and is AQUOS LINK
       4                                                           compatible, you can use these AQUOS LINK buttons.
       5                                              16           (See pages 40 to 44 for details.)
                                                              13   m (TELETEXT*)
       6                                              17           Select the TELETEXT* mode. (all TV image, all TEXT
       7                                              18           image, TV/TEXT image) (See pages 51 and 52.)
                                                                   k (Reveal hidden for TELETEXT*)
       8                                              19           TELETEXT* mode: Display hidden characters. (See page
       9                                              20           51.)
                                                                   [ (SUBTITLE for TELETEXT*)
      10                                              21           To turn the subtitles on and off. (See page 52.)
                                                      22           3 (Hold)
                                                                   TELETEXT* mode: Stop updating Teletext* pages
                                                                   automatically. Press 3 again to release the hold mode.
      11                                              23           (See pages 51 and 52.)
                                                      24           1 (Subpage)
                                                                   Display the Teletext* subpage directly. (See page 52.)
                                                                   v (Top/Bottom/Full)
                                                                   TELETEXT* mode: Set the area of magnification. (See
                                                                   page 51.)
                                                              14   TV/VIDEO (INPUT SOURCE)
                                                                   Select an input source. (TV, INPUT1, INPUT2, INPUT3,
      12                                                           INPUT4, INPUT5, INPUT6, INPUT7 (PC)) (See pages 11,
                                                                   24, 37 to 39, 45.)
                                                              15   OPC
                                                                   To switch the Optical Picture Control on and off. (See
                                                                   page 33.)
                                                              16   FREEZE
                                                                   Freeze a motion picture on the screen. (See page 24.)
                                                              17   DISPLAY
                                                                   Display the channel or input information.
                                                              18   CHr/CHs
                                                                   TV input mode: Select the channel. (See page 19.)
                                                                   TELETEXT* mode: Select the page. (See page 51.)
                                                              19   SLEEP
1    POWER (STANDBY/ON)
                                                                   Set the Sleep timer. (See page 28.)
     To switch the power on and off. (See page 14.)
2    0–9                                                      20   SELECT
     Set the channel. (See page 19.)                               To select either screen to be active in split-screen mode.
     TELETEXT* mode: Set the page. (See pages 51 and 52.)          (See page 24.)
3    A (Flashback)                                            21   MENU
     Press to return to the previous selected channel or           Display the menu screen. (See page 15.)
     external input mode. (See page 25.)                      22   a/b/c/d (Cursor)
4    WIDE                                                          Select a desired item on the setting screen.
     Change the wide image mode. (See pages 31 and 46.)
                                                                   ENTER
5    AV MODE
     Select an audio and video setting: AV Mode (STANDARD,         Execute a command.
     MOVIE, GAME, PC, USER, DYNAMIC (FIXED),                  23   RETURN
     DYNAMIC), PC Mode (PC, STANDARD, USER). (See                  MENU mode: Return to the previous menu screen. (See
     page 32.)                                                     page 15.)
6    MPX                                                      24   Colour (Red/Green/Yellow/Blue)
     Select the sound multiplex mode. (See page 26.)               TELETEXT* mode: Select a page. (See page 51.)

* Teletext function is not applicable for Hong Kong market.
                                                                                                                                9
Preparation

 Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
  1     Connecting the antenna cable
        To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
        connections that are used for coaxial cable.




               Standard DIN45325 plug (IEC169-2)
               75-ohm coaxial cable (round cable)

                          Antenna cable
                          (commercially available)


               Room antenna terminal         To antenna
               (75-ohm type)                 terminal
        Connecting external devices
  2     See pages 11 to 12 for connecting external equipment, such as a VCR and DVD player.
        Connecting the AC cord
  3                                                                  TV (rear view)




           AC outlet




                                                   AC cord
        • Place the TV close to the AC outlet, and keep the power plug within reach.
        • Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.

  4     Bundling the cables
        Insert the cable clamp in the hole on the TV as shown.




                       Cable clamp


     CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
  AC CORD CONNECTED.
10
Preparation


 Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from
TV/VIDEO on the remote control unit or TV/VIDEO on the TV.

   CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
  TV Decoder (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.

 Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT 4 or INPUT 5/INPUT 6 terminals.
 When using component cable                                          When using composite cable or
 (commercially available)                                            S-VIDEO cable (commercially available)

                                                                    S-VIDEO




                                                                                  or
                                                                         R
                                                                       AUDIO
                                                                          L
                                      VCR/Game console/
                                      Camcorder                        VIDEO


                                         PB PR
                                      Y (CB) (CR)   R – AUDIO – L
                                                                      VCR/
                                                                      Game console/
                                                                      Camcorder




 Connecting a DVD player
You can use the INPUT 1/INPUT 2/INPUT 3 (HDMI) or INPUT 5/INPUT 6 terminals when connecting to a DVD
player and other audiovisual equipment.

   NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 1. (See page 37.)

 When using HDMI cable                                               When using component cable
 (commercially available)                                            (commercially available)




                                                                                                           DVD player
                                                                                                          PB PR
                                                                                                       Y (CB) (CR)   R – AUDIO – L

      DVD player




                                                                                                                                     11
Preparation

 Connecting a Digital TV Decoder (Set Top Box)
You can use the INPUT 1/INPUT 2/INPUT 3 (HDMI) or INPUT 5/INPUT 6 terminals when connecting to a Digital TV
Decoder (Set Top Box) and other audiovisual equipment.

   NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 1. (See page 37.)

 When using HDMI cable                                           When using component cable
 (commercially available)                                        (commercially available)



Digital
TV Decoder
(Set Top Box)

                                                                                                      Digital TV Decoder
                                                                                                      (Set Top Box)
                                                                                                        PB PR
                                                                                                     Y (CB) (CR)   R – AUDIO – L




 Connecting a PC                                                 Using Digital Audio Output
You can use the INPUT 7 (PC) terminal when                     It is possible to output audio through the DIGITAL
connecting to a PC. (See page 45.)                             AUDIO OUTPUT terminal. PCM audio outputs from the
                                                               terminal.



                                                               Optical fibre cable
                                                               (commercially available)




                PC
                                                                       To optical digital input of external audio devices


                                                                   NOTE
                                                               • The DIGITAL AUDIO OUTPUT terminal usually outputs the
                                                                 same audio from the speakers. (The audio of the content
                                                                 you are viewing is output from the terminal.)
                                                               • The DIGITAL AUDIO OUTPUT terminal does not output
                                                                 some signals, depending on devices and software.




12
Preparation

 Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover.                 2 Insert the two supplied “AAA” size 3 Close the battery cover.
                                            batteries.




                                          • Place batteries with their terminals
                                            corresponding to the (e) and (f)
                                            indications in the battery compartment.
     CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
  leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
  chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.


 Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
                                                                                                               30º
                                                                                                                           5m
                                                                                                     30º             30º
                                                                            Remote control sensor
                                                                                                               30º




 Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
  In addition, do not soak the remote control unit with liquids or place it
  in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
  The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
  window of the TV is under direct sunlight or strong lighting. In such
  cases, change the angle of the lighting or TV, or operate the remote
  control unit closer to the remote sensor window.




                                                                                                                                13
Preparation

                                                           POWER indicator
 Turning the TV on/off
                                                            Light off             Power off
 Turning on the power                                       Lighted (Red)         The TV is in standby mode.
Press POWER on the TV.                                      Lighted (Green)       The TV is on.
• POWER indicator (Green): The TV is on. (After a few
  seconds, an image appears with sound.)                        NOTE
• After turning the power “ON” by pressing POWER on the
  TV, you can turn the power ON/OFF by pressing POWER      • If you are not going to use this TV for a long period of time,
  on the remote control.                                     be sure to remove the AC cord from the AC outlet.
                                                           • Minor power is consumed when the unit is in standby
                                                             mode.

                                                             Initial auto installation
                                                           When the TV powers on for the first time after purchase, the
                                                           initial auto installation wizard appears. Follow the menus and
                                    POWER button           make the necessary settings one after another.
                                                           Confirm the following before turning on the power.
                                                           • Is the antenna cable connected?
                                                           • Is the AC cord plugged in?
                                                                        Press POWER on the TV.
                                                              1         • The initial auto installation wizard appears.

                                                                        Setting the on-screen display language.
                                                              2
                                                                                              English




                                                                        Press a/b to select the desired language,
                                                              3         and then press ENTER.

                                                              4         Selecting the location of the TV.

                                                                                    HOME                 STORE



                                                                        Press c/d to select where you will use this
                                                                        TV, and then press ENTER.
                                                                        • HOME: “STANDARD” will be the default value for
                                                                          the “AV MODE” setting.
                                                                        • STORE: “DYNAMIC (FIXED)” will be the default
       POWER indicator                                                    value for the “AV MODE” setting. If the “AV
                                                                          MODE” is changed, the TV will automatically
 Turning off the power                                                    switch back to “DYNAMIC (FIXED)” when there is
                                                                          no further change to TV setting for 30 minutes.
      POWER button                                                      • Press a/b to select the desired sound system,
                                                                          and then press ENTER.
                                                                        • Auto installation will be executed.
                                                                        • You do not need to do anything during the auto
                                                                          search.

                                                               NOTE
                                                           • HOME mode: Settings are optimised for normal home
Press POWER on the remote control.                           viewing and energy efficiency.
• The TV enters standby mode and the image on the screen   • STORE mode: Settings are designed for maximum impact
  disappears.                                                in retail store displays.
• The POWER indicator on the TV changes from green to
  red.                                                     • To change the STORE mode to HOME mode, please refer
                                                             to page 56 to reset the unit.
Press POWER on the TV.
• The POWER indicator on the TV turns off.                 • If you press RETURN in step 2, the initial auto installation
• When the TV is turned off by POWER on the TV, you          wizard does not appear. The auto installation function
  cannot turn on the power by pressing POWER on the          allows you to execute the installation again from the Setup
  remote control.                                            menu. (See page 18.)

14
Preparation

 About Menu operations
 What is Menu?                                                                             H Using the control panel of the TV
• You need to bring up the On-Screen Display to perform                                    You can also operate the Menu using the control panel
  settings for the TV. The On-Screen Display for the settings                              of the TV.
  is called “Menu”.                                                                        Button operations on the control panel correspond to
• The Menu enables various settings and adjustments. (See                                  the ones on the remote control as shown below.
  pages 16 and 17.)
• The Menu can be operated with the remote control unit.

 Basic Menu operations




         Press MENU and the MENU screen displays.
  1
         MENU         [Picture]

                 Picture                     Audio                 Power Control   Setup

          AV Mode                                    [STANDARD]

          OPC                                              [Off]

          Backlight        [ +16] –16                      +16

          Contrast         [ +30]   0                       40

          Brightness       [   0] –30                      +30

          Colour           [   0] –30                      +30

          Tint             [   0] –30                      +30
                                                                                            TV control panel buttons        Remote control buttons
          Sharpness        [   0] –10                      +10

          Advanced                                                                                  TV/VIDEO                         ENTER
          Reset


         Press c/d to select the desired menu, and                                                    CH r                             a
  2      then press ENTER.
                                                                                                      CH s                             b
                  Audio                               Power Control

            STANDARD
                                                                                                      VOL k                            d
          Treble               [    0] –15                            +15

          Bass                 [    0] –15                            +15
                                                                                                      VOL l                            c
          Balance              [    0] L                               R

          SRS TS XT                                                   [Off]
                                                                                               NOTE
          Bass Enhancer                                               [On]
                                                                                           • Menu options differ in the selected input modes, but the
          Reset
                                                                                             operating procedures are the same.
         Press a/b to select the desired menu item.                                        • The screens in the operation manual are for explanation
  3      Press ENTER to proceed if necessary.
                                                                                             purposes (some are enlarged, others cropped) and may
                                                                                             vary slightly from the actual screens.
                  Audio                               Power Control

            STANDARD                                                                        About Guide Display
          Treble               [    0] –15                            +15

          Bass                 [    0] –15                            +15                  The Guide Display at the bottom of the screen shows
          Balance              [    0] L                               R                   operations with an On-Screen Display.
          SRS TS XT                                                   [Off]

          Bass Enhancer                                               [On]

          Reset


         Press a/b or c/d to select the desired item                                                    ENTER      RETURN     MENU

  4      or adjust the item to the desired level. Press
         ENTER if necessary.
         Press EXIT or MENU to exit the MENU.                                                The bar above is an operational guide for
  5      Press RETURN as necessary to return to the                                          the remote control. The bar will change in
         previous MENUs.                                                                     accordance with each menu setting screen.

                                                                                                                                                        15
Preparation

 TV/AV input mode menu items
List of TV/AV menu items to help you with operations


                                           Picture                                                                                      Setup



 AV Mode ...................................................................... Page 32         Auto Installation.......................................................... Page 18
 OPC .............................................................................. Page 33     Programme Setup ............................................... Pages 20-23
 Backlight ..................................................................... Page 33        Child Lock ................................................................... Page 27
 Contrast....................................................................... Page 33        Input Skip .................................................................... Page 39
 Brightness ................................................................... Page 33         Input Label .................................................................. Page 39
 Colour .......................................................................... Page 33      Position........................................................................ Page 35
 Tint ............................................................................... Page 33   HDMI Auto View.......................................................... Page 37
 Sharpness ................................................................... Page 33          WSS ............................................................................. Page 30
 Advanced                                                                                       4:3 Mode ...................................................................... Page 30
           Colour Temp. .................................................. Page 34              Standby Mode ............................................................. Page 26
           Film Mode ........................................................ Page 34           Language..................................................................... Page 19
           Black ................................................................ Page 34       Text Language ............................................................ Page 53
           3D-Y/C ............................................................. Page 34         Identification ............................................................... Page 56
           Monochrome ................................................... Page 34               Reset............................................................................ Page 56
           DNR .................................................................. Page 34
 Reset............................................................................ Page 33


                                                                                                                                        Option

                                           Audio
                                                                                                AQUOS LINK Setup .................................................... Page 41
                                                                                                Input Select
 AV Mode ...................................................................... Page 32                INPUT5 ............................................................. Page 38
 Treble ........................................................................... Page 36            INPUT6 ............................................................. Page 38
 Bass ............................................................................. Page 36     HDMI Audio Select ..................................................... Page 37
 Balance ........................................................................ Page 36       Output Volume Select ................................................ Page 36
 SRS TS XT ................................................................... Page 36          Audio Only ................................................................... Page 25
 Bass Enhancer ............................................................ Page 36             Game Play Time .......................................................... Page 35
 Reset............................................................................ Page 36      Colour System ............................................................ Page 39



                                           Power Control



 No Signal Off ............................................................... Page 28
 No Operation Off ........................................................ Page 28
 Ecology ........................................................................ Page 29




   NOTE
• Some menu items may not be displayed depending on the selected input source.




16
Preparation

 PC input mode menu items
List of PC menu items to help you with operations


                                          Picture                                                                                     Setup



 AV Mode ...................................................................... Page 32       Input Skip ................................................................... Page 39
 OPC .............................................................................. Page 33   Input Label ................................................................. Page 39
 Backlight ..................................................................... Page 33      Standby Mode ............................................................ Page 26
 Contrast....................................................................... Page 33      Language .................................................................... Page 19
 Brightness ................................................................... Page 33       Reset ........................................................................... Page 56
 Advanced
         Colour Temp. .................................................. Page 34
 Reset............................................................................ Page 33
                                                                                                                                      Option


                                          Audio                                               AQUOS LINK Setup .................................................... Page 41
                                                                                              Input Select
                                                                                                     INPUT5 ............................................................. Page 38
 AV Mode ...................................................................... Page 32              INPUT6 ............................................................. Page 38
 Treble ........................................................................... Page 36   Output Volume Select ................................................ Page 36
 Bass ............................................................................. Page 36   Audio Only ................................................................... Page 25
 Balance ........................................................................ Page 36     Fine Sync.
 SRS TS XT ................................................................... Page 36               Input Signal...................................................... Page 48
 Bass Enhancer ............................................................ Page 36                  Auto Sync. ...................................................... Page 47
 Reset............................................................................ Page 36           H-Position ........................................................ Page 47
                                                                                                     V-Position ........................................................ Page 47
                                                                                                     Clock ................................................................ Page 47
                                                                                                     Phase ............................................................... Page 47
                                          Power Control                                              Reset ................................................................ Page 47


 Power Management ................................................... Page 29
 No Operation Off ........................................................ Page 28
 Ecology ........................................................................ Page 29



   NOTE
• Some menu items may not be displayed depending on the selected input source.




                                                                                                                                                                                          17
Watching TV
 Setting channels automatically
You can run auto installation again, even after setting       If you have already set the password, enter it
up the preset channels.                                   4   here.
                                                              • See page 27 for setting a password.



                                                              Press c/d to select “Yes”, and then press
                                                          5   ENTER.

                                                              Press a/b to select the desired language
                                                          6   listed on the screen, and then press ENTER.
                                                              Press a/b to select the desired sound
                                                              system, and then press ENTER.
                                                              You do not need to do anything during the
                                                              auto search.
                                                              Press MENU to exit.




        Press MENU and the MENU screen displays.
  1
        Press c/d to select “Setup”.
  2
        Press a/b to select “Auto Installation”, and
  3     then press ENTER.
         MENU        [Setup ... Auto Installation]

              Setup                          Option

          Auto Installation

          Programme Setup

          Child Lock

          Input Skip

          Input Label
          Position
          HDMI Auto View

          WSS                             [Off]

          4:3 Mode                [Panorama]

          Standby Mode                [Mode1]

          Language                    [English]

          Text Language         [West Europe]

          Identification

          Reset




18
Watching TV

 Selecting programmes                                          Adjusting the volume
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.




    NOTE
• CHr/s on the TV operates the same as CHr/s on
  the remote control unit.




                                                              Changing the volume
                                                              You can change the volume on the TV or on the
                                                              remote control unit.
                                                              • To increase the volume, press VOLk.
                                                              • To decrease the volume, press VOLl.



Using 0 — 9 on the remote control unit
                                                                                                      20
Select the channels directly by pressing buttons 0 to 9.
                                                                  NOTE
                                                              • “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5”,
                                                                “INPUT6” and “INPUT7” (PC) modes can store volume
                                                                adjustment values separately.


                                                               Menu language settings
                                                              You can also select a language from setup menu.
a
                                                              Select from among 5 languages: English, Simplified
To select a 1-digit channel (e.g. channel 2):
                                                              Chinese, Traditional Chinese, Arabic and Thai.
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):                        Press MENU and the MENU screen displays.
• Press 1, followed by 2.                                       1
When viewing Teletext* information
View a page directly which is 3-digit page number from                Press c/d to select “Setup”.
100 to 899 by pressing buttons 0 to 9.                          2
Channel display
                                                                      Press a/b to select “Language”, and then
                     (Example)                                  3     press ENTER.
                            SAT.1
                              12                                      Press a/b to select the desired language
                                                                4     listed on the screen, and then press ENTER.
                PAL              I
                           MONO


* Teletext function is not applicable for Hong Kong market.
                                                                                                                          19
Watching TV

 Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.

 Auto search                                             Manual setting for each channel
You can also automatically search by performing         You can set some channel items manually. They are
the procedure below. This is the same function as       Search, Fine (TV frequency), Colour System, Sound
programme auto search in auto installation.             System, Label (Network name), Skip and Lock (Child
                                                        Lock).
       Press MENU and the MENU screen displays.
  1                                                                  Press MENU and the MENU screen displays.
                                                          1
       Press c/d to select “Setup”.
  2                                                                  Press c/d to select “Setup”.
                                                          2
       Press a/b to select “Programme Setup”, and
  3    then press ENTER.                                             Press a/b to select “Programme Setup”, and
                                                          3          then press ENTER.
       If you have already set the password, enter it
                                                                     If you have already set the password, enter it
       here.
                                                                     here.
       • See page 27 for setting a password.
                                                                     • See page 27 for setting a password.
        MENU        [Setup ... Programme Setup]
                                                                     Press a/b to select “Manual Adjust”, and
             Setup                       Option           4          then press ENTER.
         Auto Installation
                                                                     Press c/d to select “Yes”, and then press
         Programme Setup
                                                          5          ENTER.
         Child Lock

         Input Skip
                                                         Programme Setup “Manual Adjust” menu
         Input Label
         Position                                                           Please select channel to be edited


         HDMI Auto View

         WSS                          [Off]               01 SAT.1     02 PR07         03 KABEL       04         05


         4:3 Mode              [Panorama]                 06           07              08             09         10


         Standby Mode             [Mode1]                 11           12              13             14         15

         Language                 [English]               16           17              18             19         20

         Text Language       [West Europe]                                                  Next

         Identification

         Reset                                          You can select one of the following settings.

       Press a/b to select “Auto Search”, and then      1   Search (See page 21.)
  4    press ENTER.
                                                        2   Fine (See page 21.)
       Press c/d to select “Yes”, and then press        3   Colour System (See page 21.)
  5    ENTER.                                           4   Sound System (See page 21.)
       Press a/b to select the desired sound            5   Label (See page 22.)
       system, and then press ENTER.
                                                        6   Skip (See page 22.)
       Press MENU to exit.
                                                        7   Lock (See page 22.)




20
Watching TV

 Manual setting for each channel (continued)

Search tuning                                                              Colour System
       Press a/b/c/d to select the channel you                                     Press a/b/c/d to select the channel you
  1    want to edit, and then press ENTER.                                   1     want to edit, and then press ENTER.
       • The selected channel information displays.                                • The selected channel information displays.

       Press a/b to select “Search”, and then press                                Press a/b to select “Colour System” and
  2    ENTER.                                                                2     then press ENTER.
       MENU     [Setup ... Programme Setup]                                        • Receivable colour systems are listed.
                                                                                                    Colour system menu
       Search                                 Channel frequency settings
       Fine                                         179.25       MHz               Search                    Colour system settings
       Colour System    [Auto]                                                     Fine
                                                        Next                                                          Auto
       Sound System        [I]                                                     Colour System   [Auto]
                                                                                                                      PAL
       Label           [SAT.1]                          Store                      Sound System       [I]
       Skip               [Off]                                                                                     SECAM
                                                       Cancel                      Label           [SAT.1]
       Lock               [Off]                                                    Skip              [Off]         NTSC 3.58
                                                                                   Lock              [Off]         NTSC 4.43
                                                                                                                     PAL-60


       Press a/b to select item and press ENTER.
  3                                                                                Press a/b to select the optimum colour
       • Next: Search the next channel.                                      3     system, and then press ENTER.
       • Store: Memorise the current display channel.
       • Cancel: Return to the previous screen.
                 (The search result will not be stored.)                   Sound System (Broadcasting system)
Fine tuning                                                                        Press a/b/c/d to select the channel you
                                                                             1     want to edit, and then press ENTER.
       Press a/b/c/d to select the channel you
  1    want to edit, and then press ENTER.
                                                                                   • The selected channel information displays.

       • The selected channel information displays.                                Press a/b to select “Sound System”, and
                                                                             2     then press ENTER.
       Press a/b to select “Fine”, and then press
  2    ENTER.
                                                                                   • Receivable sound systems (Broadcasting systems)
                                                                                     are listed.
                                                                                                    Sound system menu
       Press c/d to adjust the frequency, and then
  3    press ENTER.                                                                Search                     Sound system settings
                                                                                   Fine                               B/G
       • Adjust while checking the background picture as                           Colour System   [Auto]
                                                                                                                      D/K
                                                                                   Sound System       [I]
         a reference.                                                                                                   I
                                                                                   Label           [SAT.1]
       Search                                 Channel frequency settings           Skip              [Off]             M
       Fine                                         179.25       MHz               Lock              [Off]
       Colour System    [Auto]
       Sound System        [I]
       Label           [SAT.1]
       Skip               [Off]                                                    Press a/b to select the optimum sound
       Lock               [Off]                                              3     system, and then press ENTER.

       • Instead of the method above, you can also set                         NOTE
         by directly entering the frequency number of the
         channel with 0 — 9.                                               • Check the sound system if the sound output were not
       • When setting a frequency on the “Fine” screen,                      correct.
         the last figure of the frequency needs to be “0” or
         “5”.
       a
       • 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
       • 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.




                                                                                                                                       21
Watching TV

 Manual setting for each channel (continued)

Labelling channels                                                           Setting the child lock
When a TV channel sends its Network Name, the auto                           You can block the viewing of any channel.
installation detects the information and assigns a name
to it. However, you can change individual channel                                     Press a/b/c/d to select the channel you
                                                                               1      want to edit, and then press ENTER.
names.
                                                                                      • The selected channel information will be displayed.
        Press a/b/c/d to select the channel you
  1     want to edit, and then press ENTER.                                           Press a/b to select “Lock”, and then press
        • The selected channel information displays.                           2      ENTER.
                                                                                      • Child lock menu will be displayed.
        Press a/b to select “Label”, and then press
  2     ENTER.                                                                                                  Lock menu
                                                                                      Search                       Applies child lock to this channel
        • The alphabet and numbers are listed.                                        Fine                                        On
                                                                                      Colour System   [Auto]
                                  Labelling menu                                      Sound System       [I]
                                                                                                                                  Off

        Search                          Broadcasting station name settings            Label           [SAT.1]
        Fine                                                                          Skip              [Off]
        Colour System   [Auto]                                                        Lock              [Off]
                                           A B C D E F G H I J CLEAR
        Sound System       [I]
        Label           [SAT.1]            K L M N O P Q R S T BACK

        Skip              [Off]            U VWX Y Z + - . _
        Lock              [Off]                                                       Press a/b to set “Lock” to “On”, and then
                                           0 1 2 3 4 5 6 7 8 9      END
                                                                               3      press ENTER.

        Press a/b/c/d to select each character of
  3     the new name for the channel, and then press
                                                                                  NOTE
                                                                             • See page 27 for setting a password.
        ENTER.                                                               • If “Lock” is set to “On” for a channel, “Child Lock has been
                                                                               activated” is displayed when you select the channel, and
        Repeat until the name is fully spelt out.
  4     • The name can be 5 characters or less.
                                                                               the image and sound of the channel is blocked.
                                                                             • When pressing ENTER while “Child Lock has been
        • When you want to set a channel name of less                          activated” is displayed, password input menu will be
          than 5 characters, select “END”.                                     displayed. Inputting the correct password lifts the child lock
                                                                               temporarily until the power is turned off.
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
        Press a/b/c/d to select the channel you
  1     want to edit, and then press ENTER.
        • The selected channel information will be displayed.

        Press a/b to select “Skip”, and then press
  2     ENTER.
        • Skip menu displays.
                                    Skip menu
        Search                              Channel skip settings
        Fine                                         On
        Colour System   [Auto]
                                                     Off
        Sound System       [I]
        Label           [SAT.1]
        Skip              [Off]
        Lock              [Off]




        Press a/b to set “Skip” to “On”, and then
  3     press ENTER.




22
Watching TV

 Sorting programmes                                                     Erasing programmes
Channel positions can be sorted freely.                                The individual programme can be erased.

        Press MENU and the MENU screen displays.                              Press MENU and the MENU screen displays.
  1                                                                      1

        Press c/d to select “Setup”.                                          Press c/d to select “Setup”.
  2                                                                      2

        Press a/b to select “Programme Setup”, and                            Press a/b to select “Programme Setup”, and
  3                                                                      3    then press ENTER.
        then press ENTER.
        If you already set the password, enter it here.                       If you already set the password, enter it here.
        • See page 27 for setting a password.                                 • See page 27 for setting a password.

        Press a/b to select “Sort”, and then press                            Press a/b to select “Erase Programme”, and
  4                                                                      4    then press ENTER.
        ENTER.

        Press c/d to select “Yes”, and then press                             Press c/d to select “Yes”, and then press
  5                                                                      5    ENTER.
        ENTER.

        Press a/b/c/d to select the channel you                               Press a/b/c/d to select the channel you
  6                                                                      6    want to erase, and then press ENTER.
        want to move, and then press ENTER.

                                                                              Press ENTER to erase the channel.
  7     Move it to the desired position by pressing                      7    All the subsequent programmes move up.
        a/b/c/d, and then press ENTER.
                                                                              Repeat the steps 6 and 7 until all desired
  8     Repeat the steps 6 and 7 until all desired                       8    channels are erased.
        channels are sorted.
                                                                                           Erase programme menus
                                  Sort menus
                               Please select channel to replace                                      Please select channel to erase

                                   01 SAT.1                                                                    01 SAT.1



               01 SAT.1   02 KABEL        03             04       05                 01 SAT.1   02 PRO7       03 KABEL        04      05


               06         07              08             09       10                 06         07            08             09       10


               11         12              13             14       15                 11         12            13             14       15


               16         17              18             19       20                 16         17            18             19       20


                                               Next                                                                Next




                               Please select channel to replace                                      Please select channel to erase

                                   01 SAT.1       02 KABEL                                                     02 PRO7


               01 SAT.1   02 KABEL       03              04       05                 01 SAT.1   02 PRO7       03 KABEL        04      05

               06         07             08              09       10                 06         07            08             09       10

               11         12             13              14       15                 11         12            13             14       15

               16         17             18              19       20                 16         17            18             19       20

                                               Next                                                                Next




                               Please select channel to replace                                      Please select channel to erase

                                  01 KABEL                                                                    02 KABEL


               01 KABEL   02 SAT.1       03              04       05                 01 SAT.1   02 KABEL      03             04       05

               06         07             08              09       10                 06         07            08             09       10

               11         12             13              14       15                 11         12            13             14       15

               16         17             18              19       20                 16         17            18             19       20

                                              Next                                                                 Next




                                                                                                                                           23
Watching TV

    Useful viewing functions
    Split-screen viewing
This function is conveniently used when, for instance,
watching cooking programmes and taking notes.

Split-screen                                                       Picture and still image
You can display two pictures except when inputting                 You can freeze a motion picture on the Display.
from the RS-232C or PC INPUT terminal.




          Press P&P.
    1     • Split-screen displays and a selected input source
            image displays.                                                 Press FREEZE.
                                                                     1      • A moving image displays on the left screen and
                                                                              a still image displays on the right screen. The still
                                                                              image is one frame captured from a moving image
                                                                              at the moment you press FREEZE.


          Press SELECT to set either screen to be
    2     active.
          • “z” displays on the active screen, which has
            sound output.

          Press TV/VIDEO to select another input
    3     source on the active screen.
                                                                                                                FREEZE
          • A selected image displays.
                                                                                                (Example)
          Press P&P to exit split-screen.
    4
                                                                            Reshoot the still image by pressing ENTER.
                                                                     2      • Each time you press ENTER, the image on the
       NOTE                                                                   right screen updates.
•   This function does not work under the following input
    conditions:                                                             Press RETURN to exit still image.
    1 Two pictures from the same source (e.g. INPUT1 and
                                                                     3
        INPUT1),
    2 Two pictures with different vertical frequency (e.g. PAL
                                                                      NOTE
        and PAL-60, PAL (50 Hz) and NTSC (60 Hz)
•   When you press P&P, the current input is moved to the          • This function does not work in INPUT 7 (PC input).
    left side screen display, and the other input appears on the   • The still image automatically goes out after 30 minutes.
    right side screen display.
    When you cannot acquire split-screen capability, perform
    the operation below.
    — Select another input whose vertical frequency is same
        as one of the current inputs (e.g. PAL and PAL).
•   When this function is not available, “No dual screen display
    available.” will display.
•   Split-screen function is only applicable with combination of
    “HDMI input” and “other type inputs (except PC input)” or
    “HDMI input” and “TV input”.




24
Watching TV

 Returning to the previously selected                            Outputting only audio
 channel                                                        When listening to music from a music programme, you
                                                                can set the display off and enjoy audio only.
                                                                        Press MENU and the MENU screen displays.
                                                                  1
                                                                        Press c/d to select “Option”.
                                                                  2
Press A to switch the currently tuned channel to the
previously tuned channel.                                               Press a/b to select “Audio Only”, and then
Press A again to switch back to the currently tuned               3     press ENTER.
channel.
                                                                        Press c/d to select “On”, and then press
Press A to toggle between the currently selected                  4     ENTER.
input source and the previously selected one.

Press A to return to the previous page in TELETEXT*              Selected item                 Description
mode.
                                                                 On              Audio is output without screen image.

 Muting the audio temporarily                                    Off             Both screen images and audio are output.


Using Mute (e) on the remote control unit                           NOTE
e mutes the current sound output.                               • When you make operations that change the picture on the
                                                                  TV such as by changing the input source, the Audio Only
         Press e.                                                 function is set to “Off”.
  1      • The sound is silenced.
         • “M” is displayed while the mute function is on.
                                Mute




         Press e again within 30 minutes to cancel the
  2      mute.
         • Before 30 minutes, the volume level returns to the
           previous setting.

    NOTE
• Mute will be cancelled after 30 minutes. However,
  the TV will not suddenly output loud sound as the
  volume level will be set to 0 automatically. Increase
  the volume level by pressing VOLk.

* Teletext function is not applicable for Hong Kong market.




                                                                                                                            25
Watching TV

 Switching the analogue audio format
You can switch between multiple audio modes              When receiving a bilingual signal
when watching a multiple audio or stereo broadcast       Each time you press MPX, the mode switches among
programme.                                               CH A, CH B and CH AB.
                                                                              Bilingual mode
                                                                            BBC2                                   BBC2
                                                                              99                                     99
                                                                    PAL         I                         PAL          I
                                                                            CH A                                   CH B


In the NICAM TV broadcasts                                                                    BBC2
When receiving a stereo signal                                                                  99
                                                                                    PAL           I
Each time you press MPX, the mode switches
                                                                                             CH AB
between NICAM STEREO and MONO.
                       Stereo mode                       When receiving a monaural signal
                    BBC2                        BBC2     When you press MPX, “MONO” displays.
                      99                          99
         PAL            I               PAL         I                        Monaural mode
         NICAM    STEREO                        MONO                                            BBC2
                                                                                                  99
                                                                                      PAL           I
                                                                                                MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among             NOTE
NICAM CH A, NICAM CH B, NICAM CH AB and                  • “BBC2” and “99” are tentative network name and channel.
MONO.
                      Bilingual mode
                    BBC2                        BBC2
                                                          Reducing the start-up time
                      99                          99
         PAL            I               PAL          I
                                                         You can reduce the TV's start-up time after turning on
         NICAM      CH A                NICAM    CH B    the power with the remote control unit.

                                                                  Press MENU and the MENU screen displays.
                    BBC2                        BBC2
                                                           1
                      99                          99
         PAL           I                PAL          I
                                                                  Press c/d to select “Setup”.
                   MONO                 NICAM   CH AB
                                                           2
When receiving a monaural signal
Each time you press MPX, the mode switches                        Press a/b to select “Standby Mode”, and
                                                           3      then press ENTER.
between NICAM MONO and MONO.
                      Monaural mode                               Press c/d to select “Mode1” or “Mode2”,
                    BBC2                         BBC2      4      and then press ENTER.
                      99                           99
          PAL          I                PAL         I
          NICAM    MONO                         MONO      Selected item                     Description

                                                          Mode1           Starting the TV is quick from standby.

In the TV mode of A2 TV broadcasts                        Mode2           Power consumption is small during
                                                                          standby.
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.                                          Press MENU to exit.
                                                           5
                       Stereo mode
                    BBC2                         BBC2
                      99                           99
          PAL           I               PAL         I
                  STEREO                        MONO




26
Watching TV

 Password setting for the child lock
 (for TV input mode)                                                  Clearing the password
Allows you to use a password to protect certain                       Allows you to clear your password.
settings from being accidentally changed.
                                                                              Repeat steps 1 to 4 in Setting a password.
                                                                        1
                                                                              Press a/b to select “Clear password”, and
                                                                        2     then press ENTER.

                                                                              Press c/d to select “Yes”, and then press
                                                                        3     ENTER.
                                                                                Change password               Clear password
                                                                                Clear password
Setting a password
Register a 4-digit password number to use the Child                                                     Yes                    No
Lock function.
        Press MENU and the MENU screen displays.
  1
        Press c/d to select “Setup”.
  2                                                                        NOTE
                                                                      • As a precautionary measure, make a note of your
        Press a/b to select “Child Lock”, and then                      password on the back of this operation manual, cut
  3     press ENTER.
                                                                        it out and keep it in a safe place that children cannot
                                                                        reach.
                                                                      • This function is only available for TV input mode.
        If you already set the password, enter it here.
  4                                                                   • To relock a channel which has been temporarily unlocked
                                                                        by inputting the correct password, turn power off and then
                                                                        on again.
        Press a/b to select “Change password”, and
  5     then press ENTER.
          Change password              Change password

          Clear password

                                  New Password


                                  Reconfirm




        Enter the 4-digit number as a password using
  6     0 — 9.
          Change password     Enter your new password. Use 4 digits
          Clear password

                                  New Password


                                  Reconfirm




        Enter the same 4-digit number as in step 6 to
  7     confirm.

    NOTE
• To view a locked channel (Lock setting in Programme
  Setup “Manual Adjust” is set to “On”), you must enter
  a password. (See page 22.) When you select a locked
  channel, a password prompt message pops up.
• Press ENTER to display the password input window.

                                                                                                                                     27
Watching TV

 Energy conservation settings
 Auto power-off at a designated time                             Auto power-off after the end of broadcast
This function is conveniently used when, for instance,          You can set the TV to automatically power off in about
going to bed while watching TV.                                 15 minutes after the TV goes into a state of receiving
                                                                no programme signals, such as the end of a broadcast
                                                                day.

                                                                         Press MENU and the MENU screen displays.
                                                                  1

        Press SLEEP.                                                     Press c/d to select “Power Control”.
  1     • Remaining time displays when sleep timer has
                                                                  2
          been set.
                                                                         Press a/b to select “No Signal Off”, and then
                                                                  3      press ENTER.
            Sleep timer: Remain 2 hr. 00 min.

                                                                         Press c/d to select “Enable”.
  2     Each time you press SLEEP, the remaining                  4      • Five minutes before the power shuts down, the
        time switches as shown below.                                      remaining time displays every minute.
        0 hr. 30 min.         1 hr. 00 min.     1 hr. 30 min.
                                                                    NOTE
             Off            2 hr. 30 min.       2 hr. 00 min.   • “Disable” is the factory preset value.
                                                                • When a TV programme finishes, and the TV receives signal
    NOTE                                                          input, this function may not operate.
• When the time has been set, countdown automatically
  starts.
• Five minutes before the preset of time expires, the            Auto power-off when there are no
  remaining time displays each minute.                           operations performed
• Select “Off” by pressing SLEEP to cancel the sleep timer.
                                                                You can set the TV to automatically power off when no
                                                                TV operation is performed for more than 3 hours.
                                                                         Press MENU and the MENU screen displays.
                                                                  1
                                                                         Press c/d to select “Power Control”.
                                                                  2
                                                                         Press a/b to select “No Operation Off”, and
                                                                  3      then press ENTER.

                                                                         Press a/b to select “30min.” or “3hr.”.
                                                                  4      • Five minutes before the power shuts down, the
                                                                           remaining time displays every minute.

                                                                    NOTE
                                                                • “Disable” is the factory preset value.




28
Watching TV

 Power Management                                                   Ecology
You can set the TV to automatically power off when no           When set to “Yes”, the TV activates the following
image is displayed on PC.                                       power saving mode.
                                                                •   “OPC” set to “On” (Page 33)
         Press MENU and the MENU screen displays.               •   “Standby Mode” set to “Mode2” (Page 26)
  1                                                             •   “No Signal Off” set to “Enable” (Page 28)
                                                                •   “No Operation Off” set to “3hr.” (Page 28)
                                                                •   “Power Management” set to “Mode1” (Page 29)
         Press c/d to select “Power Control”.
  2                                                                      Press MENU and the MENU screen displays.
                                                                    1
         Press a/b to select “Power Management”,
  3      and then press ENTER.                                           Press c/d to select “Power Control”.
                                                                    2
         Press a/b to select “Mode1” or “Mode2”,
  4      and then press ENTER.                                           Press a/b to select “Ecology”, and then
                          Power saving mode settings
                                                                    3    press ENTER.
                                     Off
                                                                         Press c/d to select “Yes”, and then press
                                   Mode1                            4    ENTER.
                                   Mode2

                                                                   NOTE
                                                                • Ecology mode cannot be deactivated by selecting “No”.
                                                                  Each setting must be changed individually to deactivate
                                                                  Ecology mode.
 Selected item                      Description

Off               • No power management
                  • Factory preset value.

Mode1             • If no signal inputs for approximately 8
                    minutes, the power shuts down.
                  • Even if you start using the PC and the
                    signal inputs again, the TV stays off.
                  • The TV turns on again by pressing
                    POWER. (See page 14.)

Mode2             • If no signal inputs for approximately 8
                    seconds, the power shuts down.
                  • When you start using the PC and the
                    signal inputs again, the TV turns on.
                  • The TV turns on again by pressing
                    POWER. (See page 14.)


     NOTE
• If you turn off the power by disconnecting AC cord when
  setting “Mode2” in Power Management, the TV may not
  function properly after turning the power on again. In such
  case, press POWER on the remote control unit.
• Pressing POWER on the display will have the same result.




                                                                                                                            29
Watching TV

 Picture size settings

 Selecting the Wide Screen Signalling                          Selecting the Wide Screen Signalling
 (WSS) picture size automatically                              (WSS) picture size manually
WSS allows a television to switch automatically among         The WSS signal has 4:3 auto-switching that allows you
the different screen formats.                                 to select between Panorama and Normal.

        Press MENU and the MENU screen displays.                     Press MENU and the MENU screen displays.
  1                                                             1
        Press c/d to select “Setup”.                                 Press c/d to select “Setup”.
  2                                                             2
        Press a/b to select “WSS”, and then press                    Press a/b to select “4:3 Mode”, and then
  3     ENTER.                                                  3    press ENTER.

        Press c/d to select “On” or “Off”, and then                  Press c/d to select “Panorama” or “Normal”,
  4     press ENTER.                                            4    and then press ENTER.

    NOTE                                                                       WSS signal 4:3 screen
• Try to set WIDE mode if an image does not switch to the      4:3 mode “Panorama”              4:3 mode “Normal”
  correct screen format. When the broadcast signal contains
  no WSS information, the function will not work even if
  enabled.




                                                               Selected item                Description

                                                               Panorama        Wide image without side bars

                                                               Normal          Normal range keeping 4:3 or 16:9 aspect
                                                                               ratio




30
Watching TV

 Selecting the picture size manually
Manual Selection                                                        Auto Selection
You can select different picture sizes that account for                 If you set “WSS” and “4:3 Mode” in the Setup menu
the kind of each picture.                                               on page 30, the optimum WIDE mode is automatically
                                                                        chosen for every broadcast containing the WSS
                                                                        information.
                                                                        “WSS” menu
                                                                        To enable Auto Selection, set “WSS” in the Setup
                                                                        menu to “On”. (See page 30.)
          Press WIDE.                                                   “4:3 Mode” menu
  1       • The WIDE MODE menu displays.                                To set the type of the wide screen, select “Panorama”
          • The menu lists the wide mode options selectable             or “Normal” in the 4:3 Mode menu. (See page 30.)
            for the type of video signal currently received.

                      WIDE MODE
                      Normal
                      Zoom 14:9
                      Panorama
                      Full                                              4:3 Mode set to “Panorama”           4:3 Mode set to “Normal”

                      Cinema 16:9
                                                                             NOTE
                      Cinema 14:9                                       • If the broadcast signal contains no WSS information, Auto
                                                                          Selection will not function even when the WSS option is
          Press WIDE or a/b while the WIDE MODE                           enabled.
  2       menu displays on the screen.
          • As you toggle down the options, each mode is
            immediately reflected on the TV.

 Selected item                                                          Description

 Normal            For 4:3 “standard” pictures. A side bar appears on each side.

 Zoom 14:9         For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom
                   with some programmes.

 Panorama          In this mode the picture is progressively stretched toward each side of the screen.

 Full              For 16:9 squeeze pictures.

 Cinema 16:9       For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

 Cinema 14:9       For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

 Dot by Dot        Displays an image with the same number of pixels on the screen (only when receiving a 1080i/1080p/SXGA/SXGA+ signal).

 Underscan         Display with an Underscan image only when receiving a 720p signal. Display with the High-Definition image adjusted
                   optimally. Noise may appear on the edge of the screen with some programmes.


                                                                                                        NOTE
                                                                                                    • Some picture sizes may not be
          Normal                         Zoom 14:9                           Panorama                 displayable depending on the
                                                                                                      input signal.




        Cinema 14:9                     Cinema 16:9                                Full



                                                                                                                                           31
Watching TV

 Selecting a preset AV Mode
The AV Mode function enables you to select
appropriate settings for audio and video to account for             Selected item                 Description
the system environment which can vary due to factors                STANDARD        For a highly defined image in a normally
like room brightness, type of programme watched or                                  bright room
the type of image input from external equipment.
                                                                    MOVIE           For a movie
Using AV MODE on the remote control unit                            GAME            Lowers image brightness for easier
                                                                                    viewing.
                                                                    PC              For PC. (Available only when inputting an
                                                                                    HDMI or PC signal.)
                                                                    USER            Allows the user to customise settings as
                                                                                    desired. You can set the mode for each
                                                                                    input source.
                                                                    DYNAMIC         Changes the image and sound settings to
                                                                    (FIXED)         the factory preset values. No adjustments
          Press AV MODE.                                                            are allowed.
  1       • Present AV Mode displays.                               DYNAMIC         For a clear-cut image emphasising high
                                                                                    contrast for sports viewing.
          Press AV MODE again before the mode
  2       displayed on the screen disappears.                          NOTE
          • The mode changes as shown below.                       • You can select a different AV Mode item for each input
                                                                     mode. (For example, select STANDARD for TV input and
                            AV input mode                            DYNAMIC for VIDEO input.)
                                                                   • During PC input mode, only “PC”, “STANDARD” and
 AV Mode: STANDARD                             AV Mode: MOVIE
                                                                     “USER” can be selected under the AV mode selection.




 AV Mode: DYNAMIC                              AV Mode: GAME




 AV Mode: DYNAMIC (FIXED)                      AV Mode: PC




                      AV Mode: USER (TV)



                            PC input mode

 AV Mode: PC                                   AV Mode: STANDARD




                     AV Mode: USER (       )



Using AV Mode on the menu screen
          Press MENU and the MENU screen displays.
  1
          Press c/d to select “Picture”.
  2
          Press a/b to select “AV Mode”, and then
  3       press ENTER.

          Press a/b/c/d to select the desired item,
  4       and then press ENTER.

32
Watching TV

 Manual picture settings                                          Selected item        cbutton                  dbutton

                                                                  OPC             Sets whether or not the screen brightness
 Picture adjustment                                                               is automatically adjusted according to
                                                                                  the lighting condition in the room. (OPC
You can adjust the picture to your preference.
                                                                                  setting: See this page.)
Follow the steps to adjust the picture.
                                                                  Backlight       The screen dims         The screen
                                                                                                          brightens
                                                                  Contrast        For less contrast       For more contrast
                                                                  Brightness      For less brightness     For more brightness
                                                                  Colour          For less colour         For more colour
                                                                                  intensity               intensity
                                                                  Tint            Skin tones become       Skin tones become
                                                                                  purplish                greenish
         Press MENU and the MENU screen displays.                 Sharpness       For less sharpness      For more sharpness
  1
                                                                  Advanced        For finer picture adjustments. (See page 34.)

         Press c/d to select “Picture”.                           Reset           Resets all picture adjustment items to the
  2                                                                               factory preset values.
         MENU         [Picture]

                 Picture                Audio                    H OPC (Optical Picture Control) setting
          AV Mode                               [STANDARD]
                                                                 You can set the TV to automatically adjust the screen
                                                                 to suitable backlight brightness according to the
          OPC                                         [Off]
                                                                 lighting conditions.
          Backlight        [ +16] –16                 +16

          Contrast         [ +30]   0                  40

          Brightness       [   0] –30                 +30

          Colour           [   0] –30                 +30

          Tint             [   0] –30                 +30

          Sharpness        [   0] –10                 +10

          Advanced                                                                OPC indicator
          Reset                                                  Using OPC on the remote control unit

         Press a/b to select the desired menu item.
  3
         Press ENTER to proceed if necessary.

         Press a/b or c/d to select the desired item
  4      or adjust the item to the desired level. Press          Press OPC to switch the OPC function on or off.
         ENTER if necessary.
                                                                 Using OPC on the menu screen
    NOTE
                                                                  Selected item                   Description
• For resetting all adjustment items to factory preset values,
  press a/b to select “Reset”, press ENTER, press c/d             On:Display      Displays the OPC effect on the screen
  to select “Yes”, and then press ENTER.                                          while adjusting the brightness of the
• Select “Advanced” and then press ENTER to set “Colour                           screen.
  Temp.”, “Film Mode”, “Black”, “3D-Y/C”, “Monochrome” or
  “DNR”. See page 34.                                             On              Automatically adjusts
                                                                  Off             The brightness is fixed at the value set in
                                                                                  “Backlight” (See this page).

                                                                 OPC indicator
                                                                 Light off        “Off” is selected in the OPC setting.

                                                                 Lighted (Green) “On” or “On:Display” is selected in the
                                                                                 OPC setting.

                                                                     NOTE
                                                                 • Make sure no object obstructs the OPC sensor, which
                                                                   could affect its ability to sense surrounding light.

                                                                                                                                 33
Watching TV

 Advanced picture settings                                   H 3D-Y/C
The advanced settings enable you to set the picture          Provides high quality images with minimal dot crawl
adjustment in more detail. There are six options you         and cross colour noise.
can choose from.
                                                              Selected item                      Description
        Press MENU and the MENU screen displays.
  1                                                           Standard         Normal adjustment
                                                              Fast             For movie image
        Press c/d to select “Picture”.                        Slow             For still image
  2
                                                              Off              3D-Y/C off
        Press a/b to select “Advanced”, and then
  3     press ENTER.                                             NOTE
                                                             • 3D-Y/C is not selectable depending on the input signal
                                                               type.
        Press a/b to select the desired menu, and
  4     then press ENTER.
                                                             • 3D-Y/C may not operate depending on the input signal
                                                               type or noisy input signal.

        Press a/b or c/d to select the desired level,        H Monochrome
  5     and then press ENTER if necessary.
                                                             For viewing images in monochrome.

H Colour Temp. (Colour Temperature)                          H DNR (Digital Noise Reduction)
Adjusts the colour temperature to give the best white        Reduces noise on the screen and produces a clearer
image.                                                       video image.

 Selected item                  Description
                                                              Selected item                      Description
 High                      White with bluish tone
                                                              Off              DNR setting off
 Mid-High
 Middle                                                       High             Higher noise reduction
 Mid-Low
                          White with reddish tone             Low              Lower noise reduction
 Low


H Film Mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality.

H Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.

 Selected item                  Description

 On              For high detail in black portions
 Off             No adjustment




34
Watching TV

 Other picture settings
 Adjusting the image position                                      Game Play Time
For adjusting a picture's horizontal and vertical position.       This function displays the elapsed game time so you
                                                                  do not lose track of the time.
        Press MENU and the MENU screen displays.                  To display the elapsed time, select “GAME” under “AV
  1                                                               Mode” for the input mode of the terminal connected to
                                                                  the game console before starting the game.
        Press c/d to select “Setup”.
  2                                                                      Press MENU and the MENU screen displays.
                                                                    1
        Press a/b to select “Position”, and then
  3     press ENTER.                                                     Press c/d to select “Option”.
                                                                    2
        Press a/b to select “H-Position” or
  4     “V-Position”.                                                    Press a/b to select “Game Play Time”, and
                                                                    3    then press ENTER.
                              Display position adjustment

                 H-Position      [    0]-10                 +10
                                                                         Press c/d to select “On”, and then press
                 V-Position       [   0]-20                 +20
                                                                    4    ENTER.
                                        Reset


                                                                  Selected item                   Description
 Selected item                          Description
                                                                   On             The elapsed time is displayed every 30
                                                                                  minutes when you switch to GAME mode
 H-Position        Centres the image by moving it to the left
                                                                                  in external input mode.
                   or right.
                                                                   Off            No adjustment
 V-Position        Centres the image by moving it up or
                   down.

        Press c/d to adjust the item to your desired
  5     position.

    NOTE
• For resetting all adjustment items to the factory preset
  values, press a/b to select “Reset”, and then press
  ENTER.
• Adjustments are stored separately according to input
  source.
• Images may not be displayed properly depending on the
  settings and/or signals.




                                                                                                                           35
Watching TV

 Audio adjustment
You can adjust the audio of the selected AV Mode.                   H Bass Enhancer
         Press MENU and the MENU screen displays.                   This function allows you to enjoy bass-enhanced
  1                                                                 sound.
         Press c/d to select “Audio”.                                       Repeat steps 1 to 2 in Audio adjustment.
  2                                                                   1
              Audio                 Power Control

           STANDARD
                                                                            Press a/b to select “Bass Enhancer”, and
          Treble      [   0] –15                    +15               2     then press ENTER.
          Bass        [   0] –15                    +15

          Balance     [   0] L                       R                      Press c/d to select “On”, and then press
          SRS TS XT                                 [Off]
                                                                      3     ENTER.
          Bass Enhancer                             [On]

          Reset                                                      Selected item                      Description
         Press a/b to select the desired menu item.
  3                                                                  On               Bass Enhancer function is on.
         Press ENTER to proceed if necessary.
                                                                     Off              Outputs the normal sound.
         Press c/d to select the desired item or adjust
  4      the item to the desired level. Press ENTER if
         necessary.                                                  Output Volume Select
Selected item             cbutton                    dbutton        Allows you to select what controls the audio output.

Treble              For weaker treble       For stronger treble             Press MENU and the MENU screen displays.
                                                                      1
Bass                For weaker bass         For stronger bass
                                                                            Press c/d to select “Option”.
Balance             Decrease audio from
                    the right speaker
                                            Decrease audio
                                            from the left speaker
                                                                      2
                                                                            Press a/b to select “Output Volume Select”,
    NOTE                                                              3     and then press ENTER.
• For resetting all adjustment items to the factory preset
  values, press a/b to select “Reset”, press ENTER, press
  c/d to select “Yes”, and then press ENTER.                                Press c/d to select “Fixed” or “Variable”, and
                                                                      4     then press ENTER.
H SRS TruSurround (TS) XT                                                                    Audio output terminal setting

You can enjoy SRS TruSurround XT sound, the same
as if you were in a movie theatre.
Using SURROUND on the remote control unit                                                  Fixed                      Variable




                                                                    Selected item                      Description

                                                                    Fixed            • Sound via speakers is adjusted with VOL
Press SURROUND to switch the SRS TS XT function
                                                                                       e/f on the remote control unit or the
on or off.                                                                             TV.
Using SRS TS XT on the menu screen                                                   • Sound via the MONITOR OUT terminal is
                                                                                       not adjustable and constantly outputs.
You can produce SRS TruSurround XT effects from
the “Audio” setting.                                                Variable         • Sound via the MONITOR OUT terminal is
                                                                                       adjusted with VOL e/f on the remote
 Selected item                      Description                                        control unit or the TV.
                                                                                     • Sound via speakers is muted.
 On                   SRS TruSurround XT creates a high
                      quality surround sound experience, when
                      watching DVD movies and TV programmes             NOTE
                      broadcast in surround sound.                  • The “Audio” menu cannot be operated when headphones
                                                                      are plugged in or when “Variable” is selected.
 Off                  Outputs the normal sound.

36
Settings when using external devices
 Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to
output the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2” or “INPUT3” by
switching the input source.
Connecting an HDMI output device




                                                                     HDMI cable
                                                                     (commercially available)
                                                       HDMI output
                                                       device


H HDMI (High-Definition Multimedia Interface)                            H HDMI Audio Select
  Auto View
                                                                                 Press MENU and the MENU screen displays.
           To watch an HDMI equipment image, select                        1
  1        “INPUT1”, “INPUT2” or “INPUT3” using TV/
           VIDEO on the remote control unit or on the TV.                        Press c/d to select “Option”.
                                                                           2
           Press MENU and the MENU screen displays.
  2
                                                                                 Press a/b to select “HDMI Audio Select”,
                                                                           3     and then press ENTER.
           Press c/d to select “Setup”.
  3                                                                              • The HDMI Audio Select can be selected only
                                                                                   when “INPUT1” is selected.
           Press a/b to select “HDMI Auto View”, and
  4        then press ENTER.
                                                                                       Option

           • The HDMI Auto View can be selected only when                           AQUOS LINK Setup
             “INPUT1”, “INPUT2” or “INPUT3” is selected.                            Input Select
           MENU         [Setup ... HDMI Auto View]                                  HDMI Audio Select                    [Digital]
                Setup                        Option                                 Output Volume Select                 [Fixed]

             Auto Installation                                                      Audio Only

             Programme Setup                                                        Game Play Time                           [On]

             Child Lock                                                             Colour System

             Input Skip                                                             Fine Sync.

             Input Label                 [DVD]                                   Press c/d to select the desired setting, and
             Position
                                                                           4     then press ENTER.
             HDMI Auto View            [Enable]
                                                                        Selected items                     Description
           Press c/d to select the desired item, and
  5        then press ENTER.                                             Digital/           Select “Digital” for audio signal via the
                                                                         Analogue           HDMI terminal.
                                                                                            Select “Analogue” for audio signal via the
Selected items                           Description                                        AUDIO jack.
 Enable/                Set whether or not to use WIDE MODE
 Disable                based on signal recognition, including an           NOTE
                        HDMI signal.                                    • Refer to your external equipment operation manual for the
                                                                          above settings.
                                                                        • When connecting a DVI-HDMI conversion adaptor/cable to
                                                                          the HDMI terminal, the image may not come in clearly.
                                                                        • “HDMI Audio Select” is only available for INPUT1.


                                                                                                                                         37
Settings when using external devices

 Selecting the input source and
 signal type

 Selecting input source                                       Selecting input signal type
Can use for selecting the input source.                      For setting the signal type of external equipment.
Using TV/VIDEO on the remote control unit or on                       Press MENU and the MENU screen displays.
the TV                                                         1
TV/VIDEO allows you to choose from the available
input sources.                                                        Press c/d to select “Option”.
                                                               2
                                                                      Press a/b to select “Input Select”, and then
                                                               3      press ENTER.

                                                                      Press a/b to select a signal type you want to
                                                               4      set, and then press ENTER.

                                                              Input source                  Selectable item

                                                              INPUT5           Auto, COMPONENT, S-VIDEO, VIDEO

                                                              INPUT6           Auto, COMPONENT, VIDEO


                                                                  NOTE
                                                             • If no colour image displays, try changing the other
                                                               signal type.
                                                             • Check the operation manual of the external equipment for
                                                               the signal type.
                                                             • When the signal type is set to “Auto”, the input terminal
                                                               where a cable is connected is automatically selected.
                                                             • When the signal type is set to “Auto” and multiple video
                                                               signal cables are connected, the signal type is selected in
                                                               the following prioritised order:
        Press TV/VIDEO on the remote control unit or           INPUT5: COMPONENT s S-VIDEO s VIDEO
  1     on the TV.                                             INPUT6: COMPONENT s VIDEO

        Press TV/VIDEO on the remote control unit or
  2     on the TV to select the input source.
        • The image and sound from the selected source
          are output on the TV.
        • You can also select the input source by pressing
          a/b.




38
Settings when using external devices

 Labelling input sources                                       Skipping HDMI/RGB input
You can assign each input source a label as you               This setting allows you to skip the HDMI or RGB input
prefer.                                                       on the “Input Select” menu.

                                                                       Press MENU and the MENU screen displays.
                                                                1
                                                                       Press c/d to select “Setup”.
                                                                2
                                                                       Press a/b to select “Input Skip”, and then
         Press TV/VIDEO to select the desired input
                                                                3      press ENTER.
  1      source.
                                                                       Press a/b to select the Input (INPUT1 to
                                                                4      INPUT3 and INPUT7) you wish to skip, and
         Press MENU and the MENU screen displays.
  2                                                                    then press ENTER.
                                                                        INPUT1 (HDMI)              Skip input selection of HDMI

         Press c/d to select “Setup”.                                   INPUT2 (HDMI)
  3                                                                     INPUT3 (HDMI)

                                                                        INPUT7 (RGB)
                                                                                                   Yes                     No
         Press a/b to select “Input Label”, and then
  4      press ENTER.

         Press a/b/c/d to select each character of
  5      the new name for the input source, and then                   Press c/d to select “Yes”, and then press
         press ENTER.
                                                                5      ENTER.
                                                                       Press MENU to exit.
                  External equipment name settings
                                                                6

                                                               Colour system settings
                    A B C D E F G H I J CLEAR
                    K L M N O P Q R S T BACK                  You can change the colour system to one that is
                    U VWX Y Z + - . _
                                                              compatible with the image on the screen.
                    0 1 2 3 4 5 6 7 8 9   END                          Press MENU and the MENU screen displays.
                                                                1
                             (Example)
                                                                       Press c/d to select “Option”.
  6
         Repeat until the name is fully spelt out.              2
         • The name can be 6 characters or less.
         • When you want to set an input source name of                Press a/b to select “Colour System”, and
           less than 6 characters, select “END”, then press     3      then press ENTER.
           ENTER to exit from the labelling menu.
                                                                       Press a/b to select a compatible video signal
                        INPUT SOURCE                            4      system of your equipment, and then press
                        TV                                             ENTER.
                                                                                         Colour system settings
                              DVD                                                                AUTO

                              INPUT2                                                              PAL

                                                                                                SECAM
                              INPUT3
                                                                                              NTSC 3.58
                              INPUT4                                                          NTSC 4.43

                                                                                                PAL-60
                              INPUT5
                              INPUT6
                                                                   NOTE
                              INPUT7                          • Factory preset value is “AUTO”.
                                                              • If “AUTO” is selected, colour system for each channel is
                                (Example)                       automatically set. If an image does not display clearly,
                                                                select another colour system (e.g. PAL, NTSC 4.43).
   NOTE                                                       • “Colour System” is selectable only when inputting an
• You cannot change labels if the input source is TV.           S-VIDEO or composite signal.

                                                                                                                                  39
AQUOS LINK
 Controlling HDMI devices using AQUOS LINK
                 What is AQUOS LINK?
                 Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you
                 can interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc
                 device) using a single remote control.
                 By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV,
                 you can control a recorder or AV amplifier using the remote control of the TV.
                 AQUOS LINK allows you to operate the HDMI-connected equipment with one remote
                 control.

                     NOTE
                 • Please check the availability of AQUOS LINK-compatible AQUOS BD Players and AQUOS
                   LINK-compatible audio systems via the sole agent in your country.


                 What you can do with AQUOS LINK
                 ✔ One Touch Play
                 While the TV is in standby mode, it automatically turns on and plays back the image
                 from the HDMI source.
                 ✔ Single remote control operation
                 The AQUOS LINK automatically recognises the connected HDMI device and you can
                 control the TV and the devices as if using a universal remote control.
                 ✔ Operating Title list of external devices
                 You can also call up the external player’s Top menu or AQUOS BD Player’s Title list
                 provided that the devices support AQUOS LINK.
                 ✔ Multiple control of HDMI devices
                 You can select which HDMI device to operate using OPTION.
                 ✔ Controlling the AQUOS LINK-compatible audio system
                 You can adjust the volume and select the sound mode of the AQUOS LINK-compatible
                 audio system.

                     NOTE
                 • Point the remote control toward the TV, not to the connected HDMI device.
                 • Video noise may occur depending on the type of HDMI-certified cable used. Make sure to use
                   a HDMI-certified cable.
                 • Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using
                   this system.
                 • These operations affect the HDMI device selected as the current input source. If the device
                   does not operate, turn on the device and select the appropriate input source using TV/VIDEO.
                 • When you insert/remove HDMI-certified cables or change connections, turn on all connected
                   HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by
                   selecting “INPUT1”, “INPUT2” or “INPUT3” from the INPUT SOURCE menu.




40
AQUOS LINK

 AQUOS LINK connection
First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC
protocol.

    NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant
  device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
  verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.

 Connecting an AQUOS BD Player via the AQUOS LINK-                                          Connecting an AQUOS BD
 compatible audio system                                                                    Player only




                                                                                                HDMI-certified cable
                                                      Optical fibre cable                        (commercially available)
                HDMI-certified cable                   (commercially available)
                (commercially available)
                                                                                                    AQUOS BD Player

                             HDMI-certified cable
                           (commercially available)


      AQUOS BD Player                       AQUOS LINK-compatible
                                            audio system

 AQUOS LINK Setup
 AQUOS LINK Auto power on                                                 Press a/b to select “Auto Power On”, and
                                                                   4      then press ENTER.
If this is activated, the One Touch Play function
                                                                           Auto Power On             Setting auto power on by AQUOS LINK
is enabled. While the TV is in standby mode, it
                                                                           Selecting Recorder
automatically turns on and plays back the image from
the HDMI source.
                                                                                                          On                    Off




                                                                          Press c/d to select “On”, and then press
                                                                   5      ENTER.
                                                                          Press MENU to exit.
        Press MENU and the MENU screen displays.
                                                                   6
  1
                                                                   NOTE
        Press c/d to select “Option”.
  2                                                             • The factory default for this item is “Off”.

        Press a/b to select “AQUOS LINK Setup”,
  3     and then press ENTER.
                                                                                                                                           41
AQUOS LINK

 Selecting recorder                                                                        Operating an AQUOS LINK device
You can select a recorder for the recording from
                                                                                          AQUOS LINK allows you to operate the HDMI-
several connected recorders.
                                                                                          connected device with one remote control.
          Repeat steps 1 to 3 in AQUOS LINK Auto                                          Use the following procedure to start playback.
  1       power on.                                                                              Press PLAY I to start playback of a title.
                                                                                            1     • See page 43, section “Playback of titles using
          Press a/b to select “Selecting Recorder”,                                                 AQUOS LINK” if you want to start playback using
  2       and then press ENTER.                                                                     the list of the titles of the AQUOS BD Player.
            Auto Power On              Selecting recorder for recording by [REC] button
                                                                                                  Press FWD J to fast forward.
            Selecting Recorder                                                              2     Press REV G to reverse.
                                              INPUT1                       [1. 0. 0. 0]           Press STOP H to stop.
                                              INPUT2                       [2. 0. 0. 0]           Press POWER to turn the HDMI-connected
                                                                                                  device on/off.

                                                                                          Use the following procedure to start recording.
                                                                                          Check the following items before recording.
          Select the recorder, and then press ENTER.                                      • Make sure the antenna cable is connected properly.
  3                                                                                       • Check if the recording media (HDD, DVD, etc.) has enough
                                                                                            capacity for recording a programme.
                                                                                          • Select the equipment for recording in “Selecting Recorder”.
          Press MENU to exit.
  4                                                                                               After you selected recording media (HDD,
                                                                                            1     DVD, etc.) in the menu, please make sure the
     NOTE                                                                                         recording menu in the ready condition.
• If you have connected the AQUOS LINK-compatible audio
                                                                                                  Press REC E to record a programme.
  system between the TV and a CEC compatible-recorder,
  the input source’s indication changes from “INPUT1” to
                                                                                            2
  “INPUT1 (Sub)” as it is shown below.
                                                                                                  Press REC STOP H to stop recording.
      Auto Power On              Selecting recorder for recording by [REC] button
                                                                                            3
      Selecting Recorder



                                       INPUT1                      [1. 0. 0. 0]
                                                                                           Listening with the AQUOS LINK-
                                       INPUT1 (Sub)                [1. 1. 0. 0]
                                                                                           compatible audio system
                                       INPUT2                      [2. 0. 0. 0]
                                                                                          You can opt to listen to the TV sound only from the
                                                                                          AQUOS LINK-compatible audio system.

                                                                                                  Open the remote control unit’s flip cover. Press
                                                                                            1     OPTION and the AQUOS LINK menu screen
                                                                                                  displays.

                                                                                                  Press a/b to select “By AQUOS AUDIO SP”,
                                                                                            2     and then press ENTER.
                                                                                                                  AQUOS LINK Menu
                                                                                                                  Recorder EPG
                                                                                                                  Top Menu/Title List
                                                                                                                  Media change
                                                                                                                  By AQUOS AUDIO SP
                                                                                                                  By AQUOS SP
                                                                                                                  Sound mode change
                                                                                                                  Setup Menu
                                                                                                                  Model select

                                                                                                  • The sound from the TV speaker and headphone
                                                                                                    terminal is silenced and only the sound from the
                                                                                                    AQUOS LINK-compatible audio system is audible.
                                                                                                  • You can use VOL k/l and MUTE (e).


42
AQUOS LINK

 Listening with the AQUOS TV speaker                               Playback of titles using AQUOS LINK
 system                                                           This section explains how to play back a title in the
You can opt to listen to the TV sound only from the               AQUOS BD Player.
AQUOS TV speaker system.

         Open the remote control unit’s flip cover, press
  1      OPTION and the AQUOS LINK menu screen
         displays.

         Press a/b to select “By AQUOS SP”, and
  2      then press ENTER.


 Manually changing the AQUOS LINK-
 compatible audio system’s sound mode
         Open the remote control unit’s flip cover, press
  1      OPTION and the AQUOS LINK menu screen
         displays.

         Press a/b to select “Sound mode change”.
  2
                         AQUOS LINK Menu
                                                                          Power on the AQUOS BD player, and select
                         Recorder EPG                               1     the appropriate external input.
                         Top Menu/Title List
                         Media change                                     Open the remote control unit’s flip cover, press
                         By AQUOS AUDIO SP
                                                                    2     OPTION and the AQUOS LINK menu screen
                         By AQUOS SP                                      displays.
                         Sound mode change                                Press a/b to select “Top Menu/Title List”,
                         Setup Menu                                 3     and then press ENTER.
                         Model select
                                                                                         AQUOS LINK Menu
         The sound mode changes every time you                                          Recorder EPG
  3      press ENTER.                                                                   Top Menu/Title List
         • Refer to the operation manual of the AQUOS                                   Media change
           audio speaker system for details.                                            By AQUOS AUDIO SP
                                                                                        By AQUOS SP
 Calling up the menu of an external device                                              Sound mode change
 connected with the TV via HDMI                                                         Setup Menu
                                                                                        Model select
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using                   • The linked recorder now powers on and the TV
the “Setup Menu” function.                                                  automatically selects the appropriate external
                                                                            input source.
         Open the remote control unit’s flip cover, and                    • The title list data from the connected AQUOS BD
  1      then press OPTION.                                                 Player displays.

         Press a/b to select “Setup Menu”, and then                       Select the title with a/b/c/d, and then
  2                                                                 4     press PLAY I to start playback.
         press ENTER.

     NOTE
• If a connected device does not have this function or the
  device is in a status where the menu cannot be displayed
  (recording, entering standby, etc.), this function may not be
  available.




                                                                                                                              43
AQUOS LINK

 Selecting media type for CEC-compatible                   Recording via the CEC-compatible
 recorder                                                  recorder’s EPG (only for recorders)
If your recorder has multiple storage media, select the   You can call up the CEC-compatible recorder’s EPG
media type here.                                          and preset timer recordings using the TV’s remote
                                                          control.
        Open the remote control unit’s flip cover, press
  1     OPTION and the AQUOS LINK menu screen                      Open the remote control unit’s flip cover, press
        displays.
                                                            1      OPTION and the AQUOS LINK menu screen
                                                                   displays.
        Press a/b to select “Media change”, and
  2     then press ENTER.                                          Press a/b to select “Recorder EPG”, and
                                                            2      then press ENTER.
                      AQUOS LINK Menu
                                                                   • The external input source switches and the
                      Recorder EPG                                   recorder’s EPG is displayed.
                      Top Menu/Title List
                                                                                   AQUOS LINK Menu
                      Media change
                                                                                   Recorder EPG
                      By AQUOS AUDIO SP
                                                                                   Top Menu/Title List
                      By AQUOS SP
                                                                                   Media change
                      Sound mode change
                                                                                   By AQUOS AUDIO SP
                      Setup Menu
                                                                                   By AQUOS SP
                      Model select
                                                                                   Sound mode change
        Select the desired medium, such as DVD or                                  Setup Menu
  3     HDD. The media type changes every time you                                 Model select
        press ENTER.
                                                                   Select the programme to record.
                                                            3      • You can use a/b/c/d, RETURN, EXIT and
 HDMI device selection                                               the coloured buttons.
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.         NOTE
                                                          • Refer to the operation manual of the recorder for details.
        Open the remote control unit’s flip cover, press
  1     OPTION and the AQUOS LINK menu screen
        displays.

        Press a/b to select “Model select”, and then
  2     press ENTER. The HDMI device changes
        every time you press ENTER.




44
Connecting a PC
Use the PC terminals to connect a PC.

   NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 50 for a list of PC signals compatible with the TV.




            Ø 3.5 mm stereo                                       RGB cable
            minijack cable                                        (commercially
            (commercially available)                              available)




                                             PC


Signal names for 15-pin mini D-sub connector
                                                       Pin No.   Signal name         Pin No.    Signal name      Pin No.    Signal name
       5         4        3        2        1                          R                        GND (Ground)                Not connected
            10        9        8        7        6                     G                        GND (Ground)                     SDA
       15        14       13       12       11
                                                                       B                        GND (Ground)                     HD
                                                                 Not connected                      +5V                           VD
                                                                    CSYNC                       GND (Ground)                     SCL

                                                         NOTE
                                                     • Macintosh adaptor may be required for use for some Macintosh computers.
                                                     • Pin No. 5 is not used for inputting the signal.


 Displaying a PC image on the screen

                                                                                 To view an image from a PC, select “INPUT7” using
                                                                                 TV/VIDEO on the remote control unit or TV/VIDEO on
                                                                                 the TV.

                                                                                                  INPUT SOURCE
                                                                                                  TV
                                                                                                       INPUT1
                                                                                                       INPUT2
                                                                                                       INPUT3
                                                                                                       INPUT4
                                                                                                       INPUT5
                                                                                                       INPUT6
                                                                                                       INPUT7

                                                                                 When connecting to a PC, the correct input signal type
                                                                                 is automatically detected. (See page 48.)

                                                                                    NOTE
                                                                                 • Each time TV/VIDEO is pressed, the input source toggles.

                                                                                                                                              45
Connecting a PC

 Selecting the picture size
You can select the picture size as illustrated below.

     NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.

Connecting a PC




            Ø 3.5 mm stereo                             RGB cable
            minijack cable                              (commercially
            (commercially available)                    available)




                        PC


                                                                               Press WIDE.
                                                                        1      • The WIDE MODE menu displays.

                                                                                  WIDE MODE                   WIDE MODE
                                                                                  Normal                 or   Full
                                                                                  Full                        Dot by Dot

                                                                                                      (Example)

                                                                               Press WIDE or a/b to select a desired item
                                                                        2      on the menu.



a
Picture size images.

        Input Signal                                 Normal                            Full                       Dot by Dot




        1024 x 768                          Keeps the original aspect       An image fully fills the      Detects the resolution of
        1280 x 1024                         ratio in a full screen          screen.                      the signal and displays
                                            display.                                                     an image with the same
                                                                                                         number of pixels on the
                                                                                                         screen.




46
Connecting a PC

 Adjusting the PC image automatically                                            Adjusting the PC image manually
This function enables the screen to be automatically                            Ordinarily you can easily adjust the picture as
adjusted to its best possible condition when the                                necessary to change image position using Auto Sync.
analogue terminals of the TV and PC are connected                               In some cases, however, manual adjustment is needed
with a commercially available RGB cable, etc.                                   to optimise the image.

         Press MENU and the MENU screen displays.                                        Press MENU and the MENU screen displays.
  1                                                                               1
         Press c/d to select “Option”.                                                   Press c/d to select “Option”.
  2                                                                               2
         Press a/b to select “Fine Sync.”, and then                                      Press a/b to select “Fine Sync.”, and then
  3      press ENTER.                                                             3      press ENTER.

         Press a/b to select “Auto Sync.”, and then                                      Press a/b to select a specific adjustment
  4      press ENTER.                                                             4      item among “H-Position”, “V-Position”, “Clock”
                                                                                         and “Phase”.
         Press c/d to select “Yes”, and then press
  5      ENTER.                                                                           Input Signal                  Image position adjustment, etc.

         • Auto Sync. starts.                                                             Auto Sync.

                                                                                          H-Position        [ 90]                                  +

                                                                                          V-Position        [ 60]                                  +
          Input Signal            Auto adjustment of image display parameters

          Auto Sync.
                                                                                          Clock             [ 90]                                  +

          H-Position     [   0]                                                           Phase             [   8]                                 +

          V-Position     [   0]                                                           Reset
                                          Yes                    No
          Clock          [   0]

          Phase          [   0]

          Reset
                                                                                 Selected item                         Description

     NOTE                                                                        H-Position              Centres the image by moving it to the left
                                                                                                         or right.
• Auto Sync. is likely to succeed when an input PC image
  has wide vertical stripes (e.g. pattern with high contrast                     V-Position              Centres the image by moving it up or
  stripes, or cross-hatched).                                                                            down.
  It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on                           Clock                   Adjusts when the image flickers with
  before starting Auto Sync.                                                                             vertical stripes.

                                                                                 Phase                   Adjusts when characters have low
                                                                                                         contrast or when the image flickers.

                                                                                         Press c/d to adjust the item to your desired
                                                                                  5      position.

                                                                                    NOTE
                                                                                • For resetting all adjustment items to the factory preset
                                                                                  values, press a/b to select “Reset”, press ENTER, press
                                                                                  c/d to select “Yes”, and then press ENTER.
                                                                                • Images may not be displayed properly depending on the
                                                                                  settings and/or input signals.




                                                                                                                                                          47
Connecting a PC

 Input resolution settings
 Selecting the input resolution
• Some input signals may have to be registered manually to
  display properly.
• The pairs of input signals (resolutions) in the list below are
  not distinguishable when received. In such case, you have
  to set the correct signal manually. After setting once, it will
  display when the same signal (resolution) is input again.

                  1024 x 768           1360 x 768

     NOTE
• You can only select the “Input Signal” on the Setup menu
  when receiving one of the 2 input signals listed above.

         Press MENU and the MENU screen displays.
  1

         Press c/d to select “Option”.
  2
         Press a/b to select “Fine Sync.”, and then
  3      press ENTER.

         Press a/b to select “Input Signal”, and then
  4      press ENTER.

         Press c/d to select the desired input signal
  5      on the display, and then press ENTER.

          Input Signal              Manually selecting the resolution
                                      of the picture input signal
          Auto Sync.

          H-Position     [ 90]

          V-Position     [ 60]
                                   1024 x 768              1360 x 768
          Clock          [ 90]

          Phase          [   8]

          Reset



                                  (Example)




48
Connecting a PC

 PC Control of the TV
• When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.
  The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
  settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections.

   NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The
communications settings of the TV are as follows:

Baud rate:                9,600 bps
Data length:              8 bits
Parity bit:               None
Stop bit:                 1 bit
Flow control:             None

Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the
next command.

Command format
            Eight ASCII codes e CR
                                                                           Command 4-digits: Command. The text of four characters.
               C1 C2 C3 C4 P1 P2 P3                         P4             Parameter 4-digits: Parameter 0 — 9, space, ?

            Command 4-digits           Parameter 4-digits        Return code

Parameter
Input the parameter values, aligning left, and fill with space(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)

               0

               0     0     0       9

               a     3     0

               1     0     0

               0     0     5       5

When “?” is input for some commands, the present setting value responds.

               ?

               ?     ?     ?       ?

Response code format
              Normal response                                              Problem response (communication error or incorrect command)

               O    K                                                          E   R   R

                         Return code (0DH)                                                 Return code (0DH)

                                                                                                                                         49
Connecting a PC

  PC compatibility chart
                              Horizontal Vertical   VESA                                                    Horizontal Vertical   VESA
       Resolution             Frequency Frequency Standard                               Resolution         Frequency Frequency Standard
             720 g 400         31.5 kHz                70 Hz                                 1024 g 768        48.4 kHz               60 Hz             ✓
             640 g 480         31.5 kHz                60 Hz              ✓      XGA         1024 g 768        56.5 kHz               70 Hz             ✓
  VGA
             640 g 480         37.9 kHz                72 Hz              ✓                  1024 g 768        60.0 kHz               75 Hz             ✓
             640 g 480         37.5 kHz                75 Hz              ✓     WXGA         1360 g 768        47.7 kHz               60 Hz             ✓
             800 g 600         35.1 kHz                56 Hz              ✓     SXGA         1280 g 1024       64.0 kHz               60 Hz             ✓
             800 g 600         37.9 kHz                60 Hz              ✓    SXGA+ 1400 g 1050               65.3 kHz               60 Hz             ✓
 SVGA
             800 g 600         48.1 kHz                72 Hz              ✓
             800 g 600         46.9 kHz                75 Hz              ✓

 DDC is a registered trademark of Video Electronics Standards Association.
 Power Management is a registered trademark of Sun Microsystems, Inc.
 VGA and XGA are registered trademarks of International Business Machines Corp.


  RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.

                                                               CONTROL                                                                    CONTROL
   CONTROL ITEM     COMMAND   PARAMETER                                          CONTROL ITEM     COMMAND   PARAMETER
                                                               CONTENTS                                                                   CONTENTS

POWER SETTING       P O W R 0     _   _   _   POWER OFF (STANDBY)             VOLUME             V O L M *      * _ _ VOLUME (0 – 60)
INPUT SELECTION A   I   T G D _   _   _   _   INPUT SWITCHING (TOGGLE)        POSITION           H P O S    * * * _ H-POSITION (AV) (–10 – 10)
                    I   T V D _   _   _   _   TV (CHANNEL FIXED)                                 H P O S    * * * _ H-POSITION (PC) (0 – 180)
                    I   A V D *   _   _   _   INPUT1–7 (1–7)                                     V P O S    * * * _ V-POSITION (AV) (–20 – 20)
CHANNEL             D C C H *     * _ _ TV DIRECT CHANNEL (1– 99)                                V P O S    * * * _ V-POSITION (PC) (0 – 120)
                    C H U P _     _   _   _   CHANNEL UP                                         C L C K    * * * _ CLOCK (0 – 180)
                    C H D W _     _   _   _   CHANNEL DOWN                                       P H S E    * * _ _ PHASE (0 – 15)
INPUT SELECTION B   I   N P 5 0   _   _   _   INPUT5 (Auto)                   WIDE MODE          W I   D E 0    _   _   _   TOGGLE

                    I   N P 5 1   _   _   _   INPUT5 (COMPONENT)                                 W I   D E 1    _   _   _   NORMAL

                    I   N P 5 2   _   _   _   INPUT5 (S-VIDEO)                                   W I   D E 2    _   _   _   ZOOM 14:9

                    I   N P 5 3   _   _   _   INPUT5 (VIDEO)                                     W I   D E 3    _   _   _   PANORAMA

                    I   N P 6 0   _   _   _   INPUT6 (Auto)                                      W I   D E 4    _   _   _   FULL

                    I   N P 6 1   _   _   _   INPUT6 (COMPONENT)                                 W I   D E 5    _   _   _   CINEMA 16:9

                    I   N P 6 3   _   _   _   INPUT6 (VIDEO)                                     W I   D E 6    _   _   _   CINEMA 14:9

AV MODE             A V M D 0     _   _   _   TOGGLE                                             W I   D E 7    _   _   _   UNDERSCAN
SELECTION
                    A V M D 1     _   _   _   STANDARD                                           W I   D E 8    _   _   _   DOT BY DOT

                    A V M D 2     _   _   _   MOVIE                           MUTE               M U T E 0      _   _   _   TOGGLE

                    A V M D 3     _   _   _   GAME                                               M U T E 1      _   _   _   MUTE ON

                    A V M D 4     _   _   _   USER                                               M U T E 2      _   _   _   MUTE OFF

                    A V M D 5     _   _   _   DYNAMIC (FIXED)                 SURROUND           A C S U 0      _   _   _   SURROUND TOGGLE

                    A V M D 6     _   _   _   DYNAMIC                                            A C S U 1      _   _   _   SURROUND ON

                    A V M D 7     _   _   _   PC                                                 A C S U 2      _   _   _   SURROUND OFF

                                                                              AUDIO CHANGE       A C H A _      _   _   _   TOGGLE

                                                                              SLEEP TIMER        O F T M 0      _   _ _     OFF

                                                                                                 O F T M 1      _   _   _   SLEEP TIMER 30 MIN

     NOTE                                                                                        O F T M 2      _   _   _   SLEEP TIMER 1 HOUR

                                                                                                 O F T M 3      _   _   _   SLEEP TIMER 1 HOUR 30 MIN
• If an underbar (_) appears in the parameter column, enter a
  space.                                                                                         O F T M 4      _   _   _   SLEEP TIMER 2 HOUR

• If an asterisk (*) appears, enter a value in the range                                         O F T M 5      _   _   _   SLEEP TIMER 2 HOUR 30 MIN

  indicated in brackets under CONTROL CONTENTS.




50
Teletext function
 About Teletext*
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather reports, sports information,
                                                                                      TELETEXT
stock exchange prices and programme previews are
among the many services available.
Teletext mode
Teletext is turned on/off with m on the remote control
unit. You can operate your TV in Teletext mode directly
by inputting commands with the remote control unit.                                          TELETEXT



                                                                When viewing the Teletext information
                                                                • Press CHr to increase the page number.
                                                                • Press CHs to decrease the page number.

                                                                     NOTE
                                                                • When you turn TELETEXT on and change a Teletext page
                                                                  right after changing channels, the relevant page may not
                                                                  be displayed until the TV finishes reading all the Teletext
                                                                  information.
                                                                Button functions
                                                                Colour (Red/Green/Yellow/Blue):
                                                                You can select a group or block of pages displayed
                                                                in the coloured brackets at the bottom of the screen
                                                                by pressing the corresponding Colour (Red/Green/
                                                                Yellow/Blue) on the remote control unit.




                                                                                          TELETEXT




                                                                              Red      Green      Yellow    Blue
Turning on and off Teletext                                     0 — 9:
                                                                Directly select any page from 100 to 899 by using 0 — 9.
         Select a TV channel or external input source
  1      providing the Teletext programme.
                                                                v (Top/Bottom/Full):
                                                                Each time you press v, the TELETEXT image
                                                                switches as shown below.
         Press m to display the Teletext.
  2                                                                      Full (Displays in full screen)

         Press m again to display the Teletext on                        Top (Displays in the upper half of the screen)
  3      the right screen and normal image on the left
         screen.                                                         Bottom (Displays in the lower half of the screen)
         • Each time you press m, the screen switches as
           shown upper right.                                   k (Reveal hidden for TELETEXT):
         • If you select a programme with no Teletext signal,   To reveal hidden information such as an answer to a
           “No Teletext available.” is displayed.               quiz, press k.
                                                                • Press k again to hide the information.
* Teletext function is not applicable for Hong Kong market.     3 (Hold):
                                                                To stop updating Teletext pages automatically, press 3.
                                                                • Press 3 again to release the hold mode.
                                                                                                                               51
Teletext function

 Displaying Subtitles                                          Displaying Subpages
You can display subtitles as they are transmitted.            You can display subpages as they are transmitted.




        Press [ to display the subtitle.
  1     • Subtitle is updated by information sent by the
          broadcasting station.
        • To stop updating subtitle automatically, press 3.

        Press [ to exit the subtitle screen.
  2

     NOTE
• Subtitle will not be displayed when the service does not
  contain subtitle information.




                                                                     Press m to display Teletext.
                                                                1
                                                                     Press 1 to display the subpage as shown
                                                                2    below.
                                                                                    Subpage screen


                                                                              +   0002



                                                                     0 — 9 directly selects the desired subpage.
                                                                3
                                                                     Press 1 to exit the subpage screen.
                                                                4




52
Teletext function

 Teletext* language setting
If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.

         Press MENU and the MENU screen displays.
  1
         Press c/d to select “Setup”.
  2
         Press a/b to select “Text Language”, and
  3      then press ENTER.

         Press a/b to select receivable teletext
  4      broadcasting language in your country, and
         then press ENTER.
         MENU   [Setup ... Text Language]



                                Display language settings


                                       West Europe

                                       East Europe

                                      Greek/Turkish

                                            Cyrillic




    NOTE
• Teletext can display only when it is sent by a network. Not
  used to convert between languages.

* Teletext function is not applicable for Hong Kong market.




                                                                53
Appendix
 Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.

               Problem                                                      Possible Solution

 • No power.                             • Check if you pressed POWER on the remote control unit. (See page 14.)
                                           If the indicator on the TV lights up red, press POWER.
                                         • Is the AC cord disconnected? (See page 10.)
                                         • Has the power been turned on? (See page 14.)

 • Unit cannot be operated.              • External influences such as lightning, static electricity, etc., may cause improper
                                           operation. In this case, operate the unit after first turning the power off the TV or
                                           unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

 • Remote control unit does not          •   Are batteries inserted with polarity (e, f) aligned? (See page 13.)
   operate.                              •   Are batteries worn out? (Replace with new batteries.)
                                         •   Are you using it under strong or fluorescent lighting?
                                         •   Is a fluorescent light shining on the remote control sensor?

 • Picture is cut off.                   • Is the image position correct? (See page 35.)
                                         • Are screen mode adjustments such as picture size made correctly? (See pages 30,
                                           31 and 46.)

 • Strange colour, light colour, or      •   Adjust the picture tone. (See pages 33 to 35.)
   dark, or colour misalignment.         •   Is the room too bright? The picture may look dark in a room that is too bright.
                                         •   Check the colour system setting. (See pages 21 and 39.)
                                         •   Check the input signal setting. (See page 48.)
                                         •   Check the HDMI Auto View setting. (See page 37.)

 • Power is suddenly turned off.         • The unit’s internal temperature has increased.
                                           Remove any objects blocking the vent or clean.
                                         • Check the power control setting. (See pages 28 and 29.)
                                         • Is the sleep timer set? (See page 28.)

 • No picture.                           • Is the connection to external equipment correct? (See pages 11, 12, 37, 45 and
                                           46.)
                                         • Has the input signal setup been performed correctly after connection? (See page
                                           48.)
                                         • Is the correct input selected? (See page 38.)
                                         • Is the picture adjustment correct? (See pages 33 to 35.)
                                         • Is the antenna connected properly? (See page 10.)
                                         • Is “On” selected in “Audio Only”? (See page 25.)

 • No sound.                             • Is the volume too low? (See page 19.)
                                         • Make sure that headphones are not connected. (See page 8.)

 • The TV sometimes makes a              • This is not a malfunction. This happens when the cabinet slightly expands and
   cracking sound.                         contracts according to changes in temperature. This does not affect the TV's
                                           performance.


 Cautions regarding use in high and low temperature environments
 • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
   This is not a malfunction, and the unit will recover when the temperature returns to normal.
 • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
   heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
   Storage temperature: f20°C to e60°C.




54
Appendix

 Error messages about recording using AQUOS LINK

  The example of an error message
                                      Error code                  Possible Solution
       displayed on a screen

                                                   Check the content (broadcast or programme)
Failed to record                         S05       or the recording medium such as HDD or DVD.
Cannot record the broadcast.                       Either the content or the recording medium may
                                                   be incompatible.
Failed to record                         S06
Cannot record the broadcast.                       This network cannot be recorded.
                                                   Use the recording function of your recording
Failed to record                         S07       device, not the AQUOS LINK function.
Cannot record the broadcast.
Failed to record                         S09

Failed to record                         S10       Use the recording function of your recording
                                                   device, not the AQUOS LINK function.
Failed to record                         S11

Failed to record                         S12
Failed to record                         S13
Cannot record the programme.                       Check the content (broadcast or programme).
                                                   It may be incompatible.
Failed to record                         S14
Cannot record the programme.
Failed to record                         S16
                                                   Check the recording medium.
No record media available.
Failed to record                         S17
                                                   Stop playback and set up the recording again.
Cannot record while playback.
Failed to record                         S18
                                                   During recording, another recording is not
Cannot record while recording other
                                                   possible.
programme.
Failed to record                         S19       Check the recording medium.
No record media available.                         Writing to the medium is prohibited.
Failed to record                         S20
                                                   Please check if the settings are properly set.
Cannot record while not receiving
                                                   Broadcasts are not receivable.
broadcast.
Failed to record                         S21       Recording to the medium is not possible. Check
No record media available.                         the recording medium.
Failed to record                         S22
                                                   Check the capacity of the recording medium.
No recordable memory available.
Failed to record                         S23       Deactivate the child lock and set up the
Age limitation is set.                             recording again.
Failed to record                         S31
                                                   Check your recording device.
Cannot record with the recorder.




                                                                                                    55
Appendix

 Reset                                                            Identification
If complex adjustments are made and the settings                 You can check the current version of the software on
cannot be restored to normal, you can reset the                  the screen.
settings to the factory preset values.

         Press MENU and the MENU screen displays.
  1
         Press c/d to select “Setup”.
  2
         Press a/b to select “Reset”, and then press
  3      ENTER.

         If you have already set the password, enter it
  4      here.
         • “Return to factory pre-settings” displays on the
           screen.

         Press c/d to select “Yes”, and then press
  5      ENTER.
         • When “Reset” is completed, the backlight will turn
           off and then on in a short period of time.
         • The screen will be returned to its original state.
         • “Execute auto installation” displays on the screen.

  6      Press c/d to select “Yes” and then press
         ENTER.

         Press a/b to select the desired language
  7      listed on the screen, and then press ENTER.
         Press c/d to select “HOME” or “STORE”,
         and then press ENTER.
         Press a/b to select the desired sound system,
         and then press ENTER.
         You do not need to do anything during the auto
         search.
         Press MENU to exit.


     NOTE
• If you execute “Reset”, all the settings such as Picture,
  Audio, Programme and Language will be reset to the
  factory preset values.




56
Appendix

 Specifications
                                   Model
                                            LC-32A66M                   LC-37A66M                  LC-42A66M                     LC-46A66M
 Item
 LCD panel                                  32o (800 mm) Advanced       37o (940 mm) Advanced      42o (1067 mm) Advanced        46o (1168 mm) Advanced
                                            Super View & BLACK TFT      Super View & BLACK TFT     Super View & BLACK TFT        Super View & BLACK TFT
                                            LCD                         LCD                        LCD                           LCD
 Resolution                                 2,073,600 pixels (1920 g 1080)
 Video Colour System                        PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
 TV           TV-Standard                   PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
 Function
              Receiving     VHF/UHF         44.25—863.25 MHz
              Channel
                            CATV            S1—S41ch (including Hyperband)
              TV-Tuning System              Auto Preset 99 ch
              STEREO/BILINGUAL              NICAM: B/G, I, D/K A2 stereo: B/G
 Backlight life                             60,000 hours (at Backlight Standard position)
 Viewing angles                             H : 176º V : 176º
 Audio amplifier                             10W g 2
 Speakers                                   10 g 4 cm 2pcs
 Terminals    Rear   Antenna input          UHF/VHF 75 q DIN type
                     INPUT 1                HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz,
                                            1080P/24Hz), AUDIO in (Ø 3.5 mm jack)
                     INPUT 2                HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
                     INPUT 3                HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
                     INPUT 4                VIDEO in, AUDIO in
                     INPUT 5                VIDEO in, AUDIO in, S-VIDEO in,
                                            COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
                     INPUT 6                VIDEO in, AUDIO in,
                                            COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
                     INPUT 7 (PC input)     15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
                     MONITOR OUT            VIDEO out, AUDIO out
                     RS-232C                9 pin D-sub male connector
                     DIGITAL AUDIO OUTPUT   Optical Digital Audio output
 OSD language                               English/Simplified Chinese/Traditional Chinese/Arabic/Thai
 Power Requirement                          AC 110—240 V, 50/60 Hz
 Power Consumption                          153 W (0.7 W Standby)       189 W (0.7 W Standby) 209 W (0.5 W Standby)              247 W (0.5 W Standby)
                     without stand          10.0 kg                     12.5 kg                    16.0 kg                       18.5 kg
 Weight
                     with stand             12.0 kg                     14.5 kg                    19.0 kg                       22.0 kg
 Operating Temperature                      0°C — 40°C

• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
  improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
  may be some deviations from these values in individual units.


 Optional accessory                                                                        Part name                           Model number

The listed optional accessory is available for the LCD colour                   Wall mount bracket                                AN-37AG2
TV. Please purchase it at your nearest shop.                                    (for LC-32A66M/LC-37A66M)
• Additional optional accessories may be available in the near                  Wall mount bracket
  future. When purchasing, please read the newest catalogue for                                                                   AN-52AG4
                                                                                (for LC-42A66M/LC-46A66M)
  compatibility and check the availability.



                                                                                                                                                               57
Appendix

 Dimensional drawings
                                                                                                                   Unit: mm
LC-32A66M/ LC-37A66M

                                                773 (902)




                                        699.2 (824.4)




                                                             393.8 (463.8)
                            513 (584)
              576 (640)




                                                                             333 (368)
                                                                                                   477 (516)
                           63 (56)




                                                 200 (200)                               74 (86)       105 (103)
          200 (200)
                          143 (125)




                                                                                                   245 (271)
    NOTE
• Figures with parentheses are for LC-37A66M.




58
Appendix

 Dimensional drawings
                                                                                                                           Unit: mm
LC-42A66M/ LC-46A66M
                                                   1020 (1113)




                                          933.2 (1023.4)




                                                                 526.0 (575.6)
              709 (773)
                             649 (706)




                                                                                 406 (440)
                                                                                                       490 (527)
                             60 (67)




                                                     400 (400)                               99(114)           104 (100)
                              200 (175)
                 400 (400)




    NOTE
                                                                                                       277 (325)
• Figures with parentheses are for LC-46A66M.




                                                                                                                                      59
Appendix

    Mounting the TV on the wall
    Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
•   Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
•   Remove all terminal covers and connected cables.
•   Lay the TV down on cushioning (such as a blanket) over a table.
•   Make sure two or more people perform the operation.

   CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.

    LC-32A66M/LC-37A66M

    1                                             Screw driver
                                                                   2
                                                  (not supplied)


                                                                                                      Stand post


                                                                                         1


                                                                    1 Detach the stand from the TV. (Hold the stand so
                                                                      it will not drop from the edge of the base area.)
    Unfasten the four screws used to secure the stand               2 Remove the stand post from the stand base and
    in place.                                                         attach it to the TV.

    LC-42A66M/LC-46A66M

    1     Hex key                                                  2


                                                                                                      Stand post




                                                                    1 Detach the stand from the TV. (Hold the stand so
                                                                      it will not drop from the edge of the base area.)
    Unfasten the four screws used to secure the stand               2 Remove the stand post from the stand base and
    in place.                                                         attach it to the TV.

   NOTE
• To attach the stand, perform the above steps in reverse order.




60
Appendix

 Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-37AG2/AN-52AG4 bracket.
• For details, refer to the instructions supplied with the optional bracket.
    CAUTION
• This TV should be mounted on the wall only with the AN-37AG2/AN-52AG4 (SHARP) wall mount bracket. The use
  of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
  personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
  mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service personnel about using an optional AN-37AG2/AN-52AG4 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.

  Hanging on the wall                                                      About setting the TV angle
  AN-37AG2/AN-52AG4 wall mount bracket.                                                                   /15/   20°
                                                                                                   0/5/10
  (See the bracket instructions for details.)
                                                                                    /15/20°
                                                                             0/5/10




     Vertical mounting               Angular mounting                            AN-37AG2                AN-52AG4

    NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, first remove the cover at the 4 locations on the rear of the TV, and then use the screws
  supplied with the wall mount bracket to secure the bracket to the rear of the TV.




                                                                                                                              61
Appendix


     CLEARING THE PASSWORD
 If you forget your password, set a new password using the following procedure.




            Press MENU and the MENU screen displays.
       1
            Press c/d to select “Setup”.
       2
            Press a/b to select “Child Lock”, and then press ENTER.
       3
            The password input screen displays.
       4

            If you enter “3001” using 0 — 9, the “Child Lock” setting menu will be displayed.
       5
            Enter the 4-digit number as a password using 0 — 9. (See page 27.)
       6
     The new password is now set.




     The Password is                                                 .


   NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.




62
Printed in Malaysia
馬來西亞印刷
TINS-E194WJZZ 1 %
09P04-MA-NF

								
To top