Cheat Sheet on - DOC by 25r4r3

VIEWS: 0 PAGES: 1

									                       Cheat Sheet on
                       Radiagem 4000

1) Install Batteries.
      A) Loosen the screw at the back using a screwdriver.
      B) Remove battery cover.
      C) Insert 2 “AA” batteries, ensuring that the polarity is correctly
          set.
      D) Close battery compartment and tighten the screws.

2) Attaching Probe.
      A) Probes must be connected via either the short or long cable.
      B) One of the probes (SAB-15) can be connected directly.

3) Start-up and testing.
      A) Press the  button down long enough for the display to appear,
         and then release.
      B) All LCD segment will light, and two beeps will be heard.
      C) Battery voltage will be displayed.
      D) Following the test, the device switches to the dose rate mode.


             Radiagem 4000 is ready for deployment

4) Shutdown.
     A) Press and hold  button down. Display go’s blank.

5) Remove Batteries.
     A) Loosen the screw at the back using a screwdriver.
     B) Remove battery cover.
     C) Remove batteries.
     D) Close battery compartment and tighten the screws.
     E) Place all equipment in case.

								
To top