ts fds 360 by F0zNb96v

VIEWS: 4 PAGES: 2

									Input Section
Impedance           10KOhm, electronically balanced

Through Gain        0dB standard. Optional +10dB to order

Input Filters       24dB/oct 30Hz subsonic filter. Optional 15Hz to order.
                    18dB/oct 26kHz ultrasonic filter

Input Connector     XLR3-31 or equivalent. Wired as pin 1 o/c, pin 2 cold, pin 3 hot
Output Section
Output              Unbalanced, 50 milliohm current limited source to drive 600 ohm load.

Max Output Level    +20dBm

Output Connector    XLR3-32 or equivalent. Wired as pin1 earth, pin 2 earth, pin 3 hot.
Crossover Filter
Filters             24dB/octave Linkwitz-Riley as standard.
                    Options include any 12,18 or 24dB/octave filter type with user
                    specified frequencies preset by plug-in frequency cards.

Phase               Continuously adjustable 0-180 deg. at corner frequency. Additional
                    180 degree using the polarity switch.

Limiter Range       0.5db steps -10dBv to -5dBv to -11dBv by changing barrier strip link.
System Performance
Noise               -85dBm 20Hz -20kHz unweighted.

Distortion          less than 0.05%THD up to +20dBm limiter cancelled.
                    Typically 0.005% THD +6dB output.
General
Insertion Points    Channel sends. Output impedance 100 Ohm. Max load 10K Ohm at
                    +20dBv.
                    Band returns. Input impedance 10KOhm. Max level +20dBv
                    unbalanced.

Electrical Supply   Switched 110-220V +10%-20% at 50/60Hz. Power supply is designed
                    with extended low-voltage tolerance to meet road show requirements.

Size                482 x 44 x 228mm (19in x 1¾in x 9ins) overall.

Weight              4.5kg packed.
Options
Output Balancing    A separate output balancing unit is available providing full transformer
                    balanced and floating output sends to drive 600 ohm loads. These
                    custom made transformers allow excellent high current and voltage
                    drive signals that are required when using long multiway signal cables.

Security Panel      For applications requiring a recessed and blank front panel unit a
security cover kit is available which converts the standard FDS360 into
a fully tamper-proof rack mounting unit. All front panel controls are
hidden behind the blank steel panel.

								
To top