Docstoc

Jabatan kejuruteraan elektrik

Document Sample
Jabatan kejuruteraan elektrik Powered By Docstoc
					ELECTRICAL
ENGINEERING
Department of
     Electrical
  Engineering
         Study Programme



                                                            Study Programmes




                                       Advanced Diploma In Electronic Engineering (Medical)

                                                           Diploma In Electrical Engineering
Department of Electrical Engineering




                                                 Diploma In Electronic Engineering (Control)

                                              Diploma In Electronic Engineering (Computer)

                                         Diploma In Electronic Engineering (Communication)

                                                 Diploma In Electronic Engineering (Medical)

                                         Diploma In Electronic Engineering (Opto-Electronic)




                                                                                               29
                                                                                                               A23
          Advanced Diploma In
Electronic Engineering (Medical)
SYNOPSIS                                                SEMESTER 1                                             APPLICATION REQUIREMENT
The programme is designed to cover the current          Kod     Program                               Kredit
wide discipline of electronics engineering with the
added specialization of electronics used in the field   A6012   Titas                                   2      1.   Malaysian citizen
of medicine and healthcare. Graduates are forecast      B6022   Advanced Engineering Mathematics        2      2.   Polytechnic with a Diploma in Ministry
to serve in the field of medicine and healthcare. The   E6013   Advanced Power Electronics              3           Higher Education related the program
use of electronics in medical equipment and health-     E6023   Optoelectronics System                  3
care today require skilled and trained engineers        E6032   Computer Networking                     2           applied for and obtained a set of
necessary for these new challenges. The graduates       E6043   Biomedical Signal Processing            3           average rating Points (CGPA) of 2.75 or
in this programme should fulfill the needs of the       E6052   Physiology for Engineers*               2           higher on final semester.
curriculum which include course in Advanced
Engineering Mathematics, Foundation in Electric
and Electronics and medical equipments. They need       SEMESTER 2
to undergo courses in Psychology, Clinical Sciences,
Functions And Operation Of Medical Equipment            A7012   English for Profesional Communication   2
and Medical Imaging.                                    B7022   Engineering Statistics                  2
                                                        E7012   Embedded Systems                        2
CAREER PROSPECTS                                        E7023   Biomedical Sensor and Transducer        3
                                                        E7033   Advanced Medical Imaging                3
Upon completion of the programme, students will         E7043   Electromagnetic Field Theory            3
be able to find employment as an Engineer special-      E7053   Biomedical Modeling and Measurement     3
izing in maintenance and restoration of medical
and clinical equipments.                                SEMESTER 3

OFFERED IN THE POLYTECHNIC                              E8011   Hospital Management                     1
                                                        E8021   Maintenance Management                  1
PSA                                                     E8033   Maintenance - Critical Care equipment   3
                                                        E8043   Maintenance - Life Support equipment    3
DURATION                                                E8052   Technical Assessment Report             2

4 Semester                                              SEMESTER 4

                                                        E9013   Maintenance - Imaging Equipment         3
                                                        E9023   Maintenance - Laboratory Equipment      3
                                                        E9032   Maintenance - Therapeutic equipment     2
                                                        E9042   Engineering Improvement                 2




                                                                                                                                                              30
      FF4EE-D16-0X                                           Diploma In
                                                             Electrical Engineering
     APPLICATION REQUIREMENT                                 SYNOPSIS                                                SEMESTER 3

                                                             This programme provides students with the knowl-        Code    Course                            Credit
     Entry requirements for                                  edge and ability to use, test, maintain and repair
     Sijil Pelajaran Malaysia Holder (SPM)                   electrical machines, motor and electronic devices.      EE301   Electronic Circuits                 2
                                                             Courses offered include Principles of Electricity,      EC302   Electronic Computer Aided
                                                             Power Electronics, Power Systems, Electrical                    Design (ECAD)                       2
         1. Malaysian citizen                                Machines, Electronic Devices, Motor Control,            ET301   Electrical Machine                  2
         2. A pass in SPM and fulfilling minimum             Power Supply & Control and Industrial Safety,           ET302   Power System                        2
                                                             Engineering Maintenance, Motor Control (AT & AU)        EJ501   Programmable Logic Control
            requirements as follows:                         Protection System, Industrial Power Supply and                  (PLC) & Automation                  2
            a. A pass in Bahasa Melayu                       Project.                                                AE301   Communicative English 2             2
            b. A pass in English Language                                                                            AS101   Soft Skills                         2
                                                             CAREER PROSPECTS                                        BA301   Engineering Mathematics 3           2
            c. Obtain FIVE (5) credits including:
                 Mathematics/Additional Mathematics          Upon successful completion of the programme,            SEMESTER 4
                 ONE (1) subject in Science/ Technology /    graduates could be employed as Electrical Techni-
                                                             cian, Electrical Engineering Service Advisor, Techni-   Code    Course                            Credit
                 Vocational/ Humanities                      cal Assistant, Electrical Engineering Supervisor and
                 THREE (3) other subjects                    Assistant Engineer in the public or private sectors.    AT401   INDUSTRIAL TRAINING                 10

                                                             OFFERED IN THE POLYTECHNIC                              SEMESTER 5
     Entry requirements for Polytechnic
     Certificate Holder                                      MAS, PPD, PKK, PMM, PSAS, PTSB, PBS, PSS                Code    Course                            Credit

                                                             DURATION                                                EC301   Computer Networking Fundamental     2
     1. Malaysian Citizen.                                                                                           ET501   DC Motor Control                    2
     2. Holder of MOHE polytechnic certificate and fulfill   6 Semester                                              EC501   Embedded System Application         2
        the minimum requirements as follows;                                                                         ET502   Power Electronics                   2
                                                             SEMESTER 1                                              EE501   Project 1                           2
                Obtain a minimum CGPA of 2.50 in the                                                                 AE501   Communicative English 3             2
                final semester examination                   Code     Course                               Credit    BA501   Engineering Mathematics 4           2
                OR                                                                                                            ***ELECTIVE                        2
                                                             ET101    Electrical Technology                   2
                Possess a minimum of THREE (3) years         ET102    Electrical Wiring                       2      SEMESTER 6
                work experience for those with CGPA          EE101    Measurement                             2
                below 2.50                                   AA101    *Islamic Education 1                    2      Code    Course                            Credit
                                                             AA102    **Moral Education 1                     2
                                                             AE101    Communicative English 1                 2      EE601   Project 2                           2
     Entry requirements for Community                        AR101    Co-Curriculum 1                         1      ET601   Power System Protection             2
     College Certificate Holder                              BA101    Engineering Mathematics 1               2      ET602   AC Motor Control                    2
                                                             BB101    Engineering Science                     2      ET603   Electrical Maintenance & Repair     2
                                                             BC101    Computer Application                    1      AA301   Islamic Civilization                2
     1. Malaysian Citizen                                                                                            BA601   Engineering Mathematics 5           2
     2. Holder of MOHE community college certificate         SEMESTER 2                                              PB201   Entrepreneurship                    2
                                                                                                                             ***ELECTIVE                         2
        (must be related to the programme applied for)       Code     Course                               Credit
        and fulfill the minimum requirements as follows ;                                                            ELECTIVE PROGRAMME
                  Obtain a minimum CGPA of 2.90 in the       ET201    Electrical Circuits                     2
                                                             EE201    Semiconductor Devices                   2      Code    Course                            Credit
                  final semester examination                 EC201    Fundamental Programming                 2
                  OR                                         EE202    Digital Electronics                     4      EJ301   Basic Control System                2
                  Possess a minimum of TWO (2) years         EC202    Computer Aided Design (CAD)             1      EC304   Microprocessor Fundamental          2
                                                             AA201    *Islamic Education 2                    2      EC503   Operating System                    2
                  work experience for those with CGPA        AA202    **Moral Education 2                     2      EE602   Circuit Analysis                    2
                  below 2.90                                 AR201    Co-Curriculum 2                         1      EJ602   Industrial Control                  2
                                                             BA201    Engineering Mathematics 2               2
                                                             AW101    Occupational Safety and Health 1        1




31
                           Diploma In Electronic                                                              FF4EE-D19-0X
                           Engineering (Control)
SYNOPSIS                                                                                                    APPLICATION REQUIREMENT
                                                      AA202    **Moral Education 2                     2
The programme covers broad discipline of electron-    AR201    Co-Curriculum 2                         1
ics engineering, with specialization of electronics                                                         Entry requirements for
                                                      BA201    Engineering Mathematics 2               2
used in the field of process and industrial automa-   AW101    Occupational Safety and Health 1        1    Sijil Pelajaran Malaysia Holder (SPM)
tion. The programme is designed with a broad-
based electrical and electronic engineering founda-
                                                      SEMESTER 3                                                1. Malaysian citizen
tion which includes mathematics, electrical and
electronic fundamentals, computer fundamentals        Code     Course                              Credit       2. A pass in SPM and fulfilling minimum
and programming, communication system funda-                                                                       requirements as follows:
mentals, semiconductor devices, wiring installation   EE301    Electronic Circuits                     2
and computer aided design which provides versatil-                                                                 a. A pass in Bahasa Melayu
                                                      EC302    Electronic Computer Aided Design
ity to the graduates, while emphasizing the area of            (ECAD)                                  2           b. A pass in English Language
specialization towards the end of the programme.      EE302    Electronic Equipment Repair             2           c. Obtain FIVE (5) credits including:
The specialization courses include control systems,   EJ301    Basic Control System                    2
programmable logic controller & automation, and                                                                         Mathematics/Additional Mathematics
                                                      EJ302    Instrumentation                         2
process measurement.                                  AE301    Communicative English 2                 2                ONE (1) subject in Science/ Technology /
                                                      AS101    Soft Skills                             2                Vocational/ Humanities
CAREER PROSPECTS                                      BA301    Engineering Mathematics 3               2                THREE (3) other subjects
This programme provides the knowledge and skills
in electronics engineering with strong foundation     SEMESTER 4                                            Entry requirements for Polytechnic
in control technology that can be applied to a
broad range of careers in most electronic engineer-                                                         Certificate Holder
                                                      Code     Course                              Credit
ing industry. The knowledge and skills that the
students acquire from the programmed will enable      AT401    INDUSTRIAL TRAINING                     10   1. Malaysian Citizen.
them to participate in the job market as Process
Equipment Repairer, Automation and Process                                                                  2. Holder of MOHE polytechnic certificate and fulfill
                                                      SEMESTER 5
Control Programmer, Process Control Technical                                                                  the minimum requirements as follows;
Assistant, Technical Site Support and Electronic      Code     Course                              Credit              Obtain a minimum CGPA of 2.50 in the
Technician
                                                                                                                       final semester examination
                                                      EC301    Computer Networking Fundamental         2
OFFERED IN THE POLYTECHNIC
                                                      EE501    Project 1                               2               OR
                                                      EC501    Embedded System Application             2               Possess a minimum of THREE (3) years
PSA, PJB, PMK                                         EJ501    Programmable Logic Controller (PLC) &                   work experience for those with CGPA
                                                               Automation                              2
DURATION                                              EJ502    Control Systems                         2               below 2.50
                                                      AE501    Communicative English 3                 2
6 Semester                                             BA501   Engineering Mathematics 4               2    Entry requirements for Matriculation
                                                               ***ELECTIVE                             2
SEMESTER 1                                                                                                  College MOE
                                                      SEMESTER 6
Code     Course                             Credit
                                                                                                            Graduates of Matriculation (Science) Programme
                                                      Code     Course                              Credit
ET101    Electrical Technology                 2                                                            obtaining CGPA 2.00 and above.
ET102    Electrical Wiring                     2      EE601    Project 2                               2
EE101    Measurement                           2      EJ601    Process Measurement                     2
AA101    *Islamic Education 1                  2      EJ602    Industrial Control                      2
AA102    **Moral Education 1                   2      EE602    Circuit Analysis                        2
AE101    Communicative English 1               2      AA301    Islamic Civilization                    2
AR101    Co-Curriculum 1                       1      BA601    Engineering Mathematics 5               2
BA101    Engineering Mathematics 1             2      PB201    Entrepreneurship                        2
BB101    Engineering Science                   2               ***ELECTIVE                             2
BC101    Computer Application                  1
                                                      ELECTIVE PROGRAMME
SEMESTER 2
                                                      Code     Course                              Credit
Code     Course                             Credit
                                                      ET302    Power System                            2
ET201    Electrical Circuits                   2      ET502    Power Electronics                       2
EE201    Semiconductor Devices                 2      EC504    Interactive Multimedia Applications     2
EC201    Fundamental Programming               2      EC304    Microprocessor Fundamental              2
EE202    Digital Electronics                   4      ET603    Electrical Maintenance & Repair         2
EC202    Computer Aided Design (CAD)           1      EC603    Embedded Robotic                        2
AA201    *Islamic Education 2                  2
                                                                                                                                                                    32
       FF4EE-D20-0X                                          Diploma In Electronic
                                                             Engineering (Computer)
     APPLICATION REQUIREMENT                                 SYNOPSIS

                                                             The Programme covers broad discipline of                AA201    *Islamic Education 2                    2
     Entry requirements for                                  electronic engineering, with specialization of          AA202    **Moral Education 2                     2
     Sijil Pelajaran Malaysia Holder (SPM)                   electronics used in the field of computer based         AR201    Co-Curriculum 2                         1
                                                             technology. The programme is designed with a            BA201    Engineering Mathematics 2               2
                                                             broad-based electrical and electronic engineering       AW101    Occupational Safety and Health 1        1
         1. Malaysian citizen                                foundation which includes mathematics, electrical
         2. A pass in SPM and fulfilling minimum             and electronic fundamentals, computer fundamen-         SEMESTER 3
            requirements as follows:                         tals and programming, communication system
                                                             fundamentals, semiconductor devices, wiring             Code     Course                              Credit
            a. A pass in Bahasa Melayu                       installation and computer aided design which
            b. A pass in English Language                    provides versatility to the graduates, while empha-     EE301    Electronic Circuits                     2
                                                             sizing the area of specialization towards the end of    EC301    Computer Networking Fundamental         2
            c. Obtain FIVE (5) credits including:                                                                    EC302    Electronic Computer Aided Design
                                                             the programme. The specialization courses include
                 Mathematics/Additional Mathematics          software component such as visual programming                    (ECAD)                                  2
                 ONE (1) subject in Science/ Technology /    and database system and also hardware compo-            EC303    Computer Architecture and
                                                             nents such as computer architecture and organiza-                Organization                            2
                 Vocational/ Humanities                                                                              EC304    Microprocessor Fundamental              2
                                                             tion and computer system diagnosis and mainte-
                 THREE (3) other subjects                    nance.                                                  AE301    Communicative English 2                 2
                                                                                                                     AS101    Soft Skills                             2
                                                             CAREER PROSPECTS                                         BA301   Engineering Mathematics 3               2
     Entry requirements for Polytechnic
     Certificate Holder                                      This programme provides the knowledge and skills        SEMESTER 4
                                                             in electronic engineering with specialization in
                                                             computer. The knowledge and skills that the             Code     Course                              Credit
     1. Malaysian Citizen.
                                                             students acquire from the programme will enable
     2. Holder of MOHE polytechnic certificate and fulfill   them to participate in the job market as Computer       AT401    INDUSTRIAL TRAINING                     10
        the minimum requirements as follows;                 Technician, Electronic Technician, Technical Special-
                                                             ist, Electrical, Electronic and Computer Service        SEMESTER 5
                Obtain a minimum CGPA of 2.50 in the
                                                             Technician, Assistant Engineer and Marketing
                final semester examination                   Executive.                                              Code     Course                              Credit
                OR
                                                             OFFERED IN THE POLYTECHNIC                              EP301    Communication System
                Possess a minimum of THREE (3) years                                                                          Fundamentals                            2
                work experience for those with CGPA          PUO, SAS, PPD, PKK, PSP, PSMZA, PMM, PSAS,              EE501    Project 1                               2
                below 2.50                                   PTSB, PSIS, PTSS                                        EC501    Embedded System Application             2
                                                                                                                     EC502    Visual Basic Programming                2
                                                             DURATION                                                EC503    Operating Systems                       2
     Entry requirements for Matriculation                                                                            AE501    Communicative English 3                 2
     College MOE                                             6 Semester                                              BA501    Engineering Mathematics 4               2
                                                                                                                              ***ELECTIVE                             2
                                                             SEMESTER 1
     Graduates of Matriculation (Science) Programme                                                                  SEMESTER 6
     obtaining CGPA 2.00 and above.                          Code     Course                               Credit
                                                                                                                     Code     Course                              Credit
                                                             ET101    Electrical Technology                   2
     Entry requirements for Community                        ET102    Electrical Wiring                       2      EE601    Project 2                               2
     College Certificate Holder                              EE101    Measurement                             2      EE603    CMOS Integrated Circuit Design          2
                                                             AA101    *Islamic Education 1                    2      EC601    Database System                         2
                                                             AA102    **Moral Education 1                     2      EC602    Computer System Diagnosis and
     1. Malaysian Citizen                                    AE101    Communicative English 1                 2               Maintenance                             3
     2. Holder of MOHE community college certificate         AR101    Co-Curriculum 1                         1      AA301    Islamic Civilization                    2
                                                             BA101    Engineering Mathematics 1               2      B601     Engineering Mathematics 5               2
        (must be related to the programme applied for)                                                               PB201    Entrepreneurship                        2
                                                             BB101    Engineering Science                     2
        and fulfill the minimum requirements as follows ;    BC101    Computer Application                    1               ***ELECTIVE                             2
                  Obtain a minimum CGPA of 2.90 in the
                                                             SEMESTER 2                                              ELECTIVE PROGRAMME
                  final semester examination
                  OR                                         Code     Course                               Credit    Code     Course                              Credit
                  Possess a minimum of TWO (2) years
                                                             ET201    Electrical Circuits                     2      EJ501    Programmable Logic Controller (PLC) &
                  work experience for those with CGPA                                                                         Automation                              2
                                                             EE201    Semiconductor Devices                   2
                  below 2.90                                 EC201    Fundamental Programming                 2      EE503    IC Fabrication and Packaging
                                                             EE202    Digital Electronics                     4               Technology                              2
33                                                           EC202    Computer Aided Design (CAD)             1      EC504
                                                                                                                     EE604
                                                                                                                              Interactive Multimedia Applications
                                                                                                                              CMOS VLSI Layout Design
                                                                                                                                                                      2
                                                                                                                                                                      2
                                                                                                                     EC603    Embedded Robotic                        2
        Diploma In Electronic                                                                                      FF4EE-D21-0X
Engineering (Communication)
SYNOPSIS                                                    SEMESTER 3                                           APPLICATION REQUIREMENT
The programme covers broad discipline of electronics        Code     Course                             Credit
engineering, with specialization in communication                                                                Entry requirements for
technology. The programme is designed with a broad-         EE301    Electronic Circuits                  2      Sijil Pelajaran Malaysia Holder (SPM)
based electrical and electronic engineering foundation      EP301    Communication System
which includes mathematics, electrical and electronic                Fundamentals                         2
fundamentals, computer fundamentals and program-            EC302    Electronic Computer Aided Design                1. Malaysian citizen
ming, communication system fundamentals, semicon-                    (ECAD)                               2          2. A pass in SPM and fulfilling minimum
ductor devices, wiring installation and computer aided      EE302    Electronic Equipment Repair          2
design which provides versatility to the graduates, while   EP302    Telephony                            2             requirements as follows:
emphasizing the area of specialisation towards the end      AE301    Communicative English 2              2             a. A pass in Bahasa Melayu
of the programme. The specialization courses include        AS101    Soft Skills                          2             b. A pass in English Language
telephony, fibre-optic communication, data communi-          BA301   Engineering Mathematics 3            2
cation, wireless communication and microwave devices.
                                                                                                                        c. Obtain FIVE (5) credits including:
                                                            SEMESTER 4                                                       Mathematics/Additional Mathematics
CAREER PROSPECTS                                                                                                             ONE (1) subject in Science/ Technology /
                                                            Code     Course                             Credit
This programme provides the knowledge and skills
                                                                                                                             Vocational/ Humanities
in communication engineering that can be applied            AT401    INDUSTRIAL TRAINING                  10                 THREE (3) other subjects
to a range of careers in electronics communication
field. The knowledge and skills that the students           SEMESTER 5
acquire from the programme will enable them to
                                                                                                                 Entry requirements for Polytechnic
participate in the job market as Assistant Engineers        Code     Course                             Credit   Certificate Holder
/ Technical Executive, Sales Executive and Supervi-
sor.                                                        EC301    Computer Networking Fundamental      2
                                                            EE501    Project 1                            2      1. Malaysian Citizen.
OFFERED IN THE POLYTECHNIC                                  EP501    Fibre Optic Communication System     2      2. Holder of MOHE polytechnic certificate and fulfill
                                                            EC501    Embedded System Application          2         the minimum requirements as follows;
PUO, SAS, MAS, PKB, PKS, PPD, PKK, PSA, PJB, PSP,           EE602    Circuit Analysis                     2
PMK, PKT, PSMZA, PMM, PSAS, PTSB, PSIS, PTSS,               AE501    Communicative English 3              2                 Obtain a minimum CGPA of 2.50 in the
PMU, PJK                                                    BA501    Engineering Mathematics 4            2                 final semester examination
                                                                     ***ELECTIVE                          2                 OR
DURATION
                                                                                                                            Possess a minimum of THREE (3) years
                                                            SEMESTER 6
6 Semester                                                                                                                  work experience for those with CGPA
                                                            Code     Course                             Credit              below 2.50
SEMESTER 1
                                                            EE601    Project 2                            2
Code      Course                                 Credit     EP601    Data Communication                   2      Entry requirements for Matriculation
                                                            EP602    Wireless Communication               2      College MOE
ET101     Electrical Technology                     2       EP603    Microwave Devices                    2
ET102     Electrical Wiring                         2       AA301    Islamic Civilization                 2
EE101     Measurement                               2       BA601    Engineering Mathematics 5            2      Graduates of Matriculation (Science) Programme
AA101     *Islamic Education 1                      2       PB201    Entrepreneurship                     2      obtaining CGPA 2.00 and above.
AA102     **Moral Education 1                       2                ***ELECTIVE                          2
AE101     Communicative English 1                   2
AR101     Co-Curriculum 1                           1       ELECTIVE PROGRAMME
BA101     Engineering Mathematics 1                 2
BB101     Engineering Science                       2       Code     Course                             Credit
BC101     Computer Application                      1
                                                            EE503    IC Fabrication and Packaging
SEMESTER 2                                                           Technology                           2
                                                            EO501    Optoelectronic                       2
Code      Course                                 Credit     EP604    Microwave Communication Systems      2
                                                            EE605    Signal & System                      2
ET201     Electrical Circuits                       2
EE201     Semiconductor Devices                     2
EC201     Fundamental Programming                   2
EE202     Digital Electronics                       4
EC202     Computer Aided Design (CAD)               1
AA201     *Islamic Education 2                      2
AA202     **Moral Education 2                       2
AR201     Co-Curriculum 2                           1
BA201     Engineering Mathematics 2                 2
AW101     Occupational Safety and Health 1          1
                                                                                                                                                                         34
       FF4EE-D23-0X                                          Diploma In Electronic
                                                             Engineering (Medical)
                                                                                                                         AA201   *Islamic Education 2                 2
     APPLICATION REQUIREMENT                                 SYNOPSIS                                                    AA202   **Moral Education 2                  2
                                                                                                                         AR201   Co-Curriculum 2                      1
                                                             The programme covers broad discipline of electronics        BA201   Engineering Mathematics 2            2
     Entry requirements for                                  engineering, with specialization of electronics used in     AW101   Occupational Safety and Health 1     1
     Sijil Pelajaran Malaysia Holder (SPM)                   biomedical engineering. The programme is designed
                                                             with a broad-based electrical and electronic engineering
                                                                                                                         SEMESTER 3
                                                             foundation which includes mathematics, electrical and
         1. Malaysian citizen                                electronic fundamentals, computer fundamentals and          Code    Course                             Credit
         2. A pass in SPM and fulfilling minimum             programming, communication system fundamentals,
            requirements as follows:                         semiconductor devices, wiring installation and compu-       EE301   Electronic Circuits                  2
                                                             ter aided design which provides versatility to the gradu-   EP301   Communication System
            a. A pass in Bahasa Melayu                       ates, while emphasizing the area of specialization                  Fundamentals                         2
            b. A pass in English Language                    towards the end of the programme. The specialization        EC302   Electronic Computer Aided Design
            c. Obtain FIVE (5) credits including:            courses include anatomy & physiology, medical system                (ECAD)                               2
                                                             practice, biomedical signal measurement, biomedical         EE302   Electronic Equipment Repair          2
                 Mathematics/Additional Mathematics          instrumentation and medical imaging.                        EU301   Anatomy and Physiology               2
                 ONE (1) subject in Science/ Technology /                                                                EU302   Medical System Practice              2
                 Vocational/ Humanities                      CAREER PROSPECTS                                            A301    Communicative English 2              2
                 THREE (3) other subjects                                                                                AS101   Soft Skills                          2
                                                             A biomedical equipment technician is a vital                BA301   Engineering Mathematics 3            2
                                                             component of the healthcare delivery system and is
     Entry requirements for Polytechnic                      responsible for maintaining medical equipments.
                                                             They are also able to work in the manufacturing of          SEMESTER 4
     Certificate Holder                                      medical equipments, computer and electronic                 Code    Course                             Credit
                                                             equipments and machinery manufacturing indus-
     1. Malaysian Citizen.                                   tries. They help to design, develop, test and manu-         AT401   INDUSTRIAL TRAINING                  10
                                                             facture electrical and electronic equipments. They
     2. Holder of MOHE polytechnic certificate and fulfill   also work in product evaluation and testing, using
                                                             measuring and diagnostic devices to adjust, test            SEMESTER 5
        the minimum requirements as follows;
                Obtain a minimum CGPA of 2.50 in the         and repair equipments. The graduates of the                 Code    Course                             Credit
                                                             programme will have the opportunity to work as
                final semester examination                   Biomedical Engineering Technician, Biomedical               EC301   Computer Networking
                OR                                           Equipment Technician, Electronic Technician,                        Fundamental                          2
                Possess a minimum of THREE (3) years         Technical Assistant, Assistant Engineer Sales               EE501   Project 1                            2
                                                             consultant and Training Personnel.                          EC501   Embedded System Application          2
                work experience for those with CGPA
                                                                                                                         EU501   Biomedical Signal Measurement        2
                below 2.50                                   OFFERED IN THE POLYTECHNIC
                                                                                                                         EU502   Biomedical Instrumentation           2
                                                                                                                         AE501   Communicative English 3              2
                                                             PSA                                                         BA501   Engineering Mathematics 4            2
     Entry requirements for Matriculation
                                                                                                                                 ***ELECTIVE                          2
     College MOE                                             DURATION
                                                                                                                         SEMESTER 6
                                                             6 Semester
     Graduates of Matriculation (Science) Programme
                                                                                                                         Code    Course                             Credit
     obtaining CGPA 2.00 and above.                          SEMESTER 1
                                                                                                                         ET502   Power Electronics                    2
                                                             Code      Course                                 Credit     EE601   Project 2                            2
                                                                                                                         EU601   Medical Imaging                      2
                                                             ET101     Electrical Technology                      2      EE602   Circuit Analysis                     2
                                                             ET102     Electrical Wiring                          2      AA301   Islamic Civilization                 2
                                                             EE101     Measurement                                2      BA601   Engineering Mathematics 5            2
                                                             AA101     *Islamic Education 1                       2      PB201   Entrepreneurship                     2
                                                             AA102     **Moral Education 1                        2              ***ELECTIVE                          2
                                                             AE101     Communicative English 1                    2
                                                             AR101     Co-Curriculum 1                            1
                                                             BA101     Engineering Mathematics 1                  2      ELECTIVE PROGRAMME
                                                             BB101     Engineering Science                        2      Code    Course                             Credit
                                                             BC101     Computer Application                       1
                                                                                                                         EJ301   Basic Control System                 2
                                                             SEMESTER 2
                                                                                                                         EC304   Microprocessor Fundamental           2
                                                                                                                         ET302   Power System                         2
                                                             Code      Course                                 Credit     EP601   Data Communication                   2
                                                                                                                         ET601   Power System Protection              2
                                                             ET201     Electrical Circuits                        2      EP602   Wireless Communication               2
                                                             EE201     Semiconductor Devices                      2
35                                                           EC201
                                                             EE202
                                                                       Fundamental Programming
                                                                       Digital Electronics
                                                                                                                  2
                                                                                                                  4
                                                                                                                         EE604
                                                                                                                         EE605
                                                                                                                                 CMOS VLSI Layout Design
                                                                                                                                 Signal & System
                                                                                                                                                                      2
                                                                                                                                                                      2
                                                             EC202     Computer Aided Design (CAD)                1
       Diploma In Electronic                                                                                     FF4EE-D29-0X
Engineering (Opto-Electronic)
 SYNOPSIS                                                                                                       APPLICATION REQUIREMENT
 The programme covers broad discipline of electronics       AR201   Co-Curriculum 2                       1
 engineering, with specialization of electronics used in    BA201   Engineering Mathematics 2             2     Entry requirements for
 the field of microelectronic with optical technology       AW101   Occupational Safety and Health 1      1     Sijil Pelajaran Malaysia Holder (SPM)
 known as optoelectronic. The programme is designed
 with a broad-based electrical and electronic engineering   SEMESTER 3
 foundation which includes mathematics, safety, electri-                                                           1. Malaysian citizen
 cal and electronic fundamentals, computer fundamen-        Code    Course                             Credit      2. A pass in SPM and fulfilling minimum
 tals and programming, communication system funda-
 mentals, semiconductor devices, wiring installation and
                                                                                                                      requirements as follows:
                                                            EE301   Electronic Circuits                   2
 computer aided design which provides versatility to the    EP301   Communication System                              a. A pass in Bahasa Melayu
 graduates, while emphasizing the area of specialization            Fundamentals                          2           b. A pass in English Language
 towards the end of the programme. The specialization       EC302   Electronic Computer Aided Design
 courses include optoelectronics, fibre optic communica-
                                                                                                                      c. Obtain FIVE (5) credits including:
                                                                    (ECAD)                                2
 tion system, advanced optoelectronic, CMOS IC design       EE302   Electronic Equipment Repair           2                Mathematics/Additional Mathematics
 and also IC fabrication and packaging technology.          EO301   Optical Fundamental                   2                ONE (1) subject in Science/ Technology /
                                                            AE301   Communicative English 2               2                Vocational/ Humanities
 CAREER PROSPECTS                                           AS101   Soft Skills                           2
                                                            BA301   Engineering Mathematics 3             2                THREE (3) other subjects
 This programme provides knowledge and skills in
 optoelectronic engineering that can be applied to a        SEMESTER 4
 broad range of careers in microelectronic and
 semiconductor industries. The knowledge and skills         Code    Course                             Credit
 that the students acquire from the programme will
 enable them to participate in the job market as            AT401   INDUSTRIAL TRAINING                   10
 Optoelectronics Assistant Engineer / Technician,
 Electronic Lab Technician, Fiber Optic Splicing            SEMESTER 5
 Technician, Engineer Product Technologies, Process
 Engineer Assistant and IC Product Engineer Assist-         Code    Course                             Credit
 ant.
                                                            EC301   Computer Networking
 OFFERED IN THE POLYTECHNIC                                         Fundamental                           2
                                                            EE501   Project 1                             2
 PTSS                                                       EC501   Embedded System Application           2
                                                            EO501   Optoelectronic                        2
 DURATION                                                   EP501   Fibre Optic Communication System      2
                                                            EE603   CMOS Integrated Circuit Design        2
 6 Semester                                                 AE501   Communicative English 3               2
                                                            BA501   Engineering Mathematics 4             2
 SEMESTER 1
                                                            SEMESTER 6
 Code      Course                                Credit
                                                            Code    Course                             Credit
 ET101     Electrical Technology                     2
 ET102     Electrical Wiring                         2      EE503   IC Fabrication and Packaging
 EE101     Measurement                               2              Technology                            2
 AA101     *Islamic Education 1                      2      EE601   Project 2                             2
 AA102     **Moral Education 1                       2      EO601   Advance Optoelectronic                2
 AE101     Communicative English 1                   2      AA301   Islamic Civilization                  2
 AR101     Co-Curriculum 1                           1      BA601   Engineering Mathematics 5             2
 BA101     Engineering Mathematics 1                 2      PB201   Entrepreneurship                      2
 BB101     Engineering Science                       2              ***ELECTIVE                           4
 BC101     Computer Application                      1
                                                            ELECTIVE PROGRAMME
 SEMESTER 2
                                                            Code    Course                             Credit
 Code      Course                                Credit
                                                            EC304   Microprocessor Fundamental            2
 ET201     Electrical Circuits                       2      EJ501   Programmable Logic Controller
 EE201     Semiconductor Devices                     2              (PLC) & Automation                    2
 EC201     Fundamental Programming                   2      EC504   Interactive Multimedia Applications   2
 EE202     Digital Electronics                       4      EC602   Computer System Diagnosis and
 EC202     Computer Aided Design (CAD)               1              Maintenance                           2
 AA201     *Islamic Education 2                      2      EE604   CMOS VLSI Layout Design               2
 AA202     **Moral Education 2                       2      EC603   Embedded Robotic                      2
                                                                                                                                                                      36

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:482
posted:7/26/2012
language:English
pages:10