CASIO SE Cash Register by jennyyingdi

VIEWS: 31 PAGES: 5

									          HOTPOS SETUP GUIDE – www.hotpos.com.au – ph 1300 735 919




     TECHNICAL INFORMATION FOR THE QUICK SETUP OF CASIO CASH REGISTERS
                                                        BULLETIN NO.: QS18
                           CASIO SE-C300 Cash Register
MAC Clear ECR

          Set mode switch to off
          Hold Down the [FEED] button
          Turn Key to PGM while still holding down the [FEED] button
          After 5 seconds release the [FEED] button
          ‘0000000000’ will appear on the display and the register is now ready to receive it’s
          MAC code
          Enter 17240 for dept buttons or 10040 for plu buttons
          Press Sub Total
          (Wait for a bit... the register will go into program mode and the display will read 0.00
          when its done)
          Insert Memory Batteries


Set Register For Australian GST

          Turn Key to X
          Enter 01012001
          Press Sub Total
          Press Cash



Set ECR to operate as Receipt or Journal

          Turn Key to Program
          Press 1
          Press Sub Total
          Press 10 (for Journal)                     or        0 (for Receipt)
          Press [CH] Key
          Press Sub Total



Set Time

          Turn Key to Program


/users/darrylsullivan/!Hotpos/Product info/Cash registers/Casio/SE-C300 manual/Setup guide/SE-C300 setup guide V2.doc   QS12 - 1 -
          HOTPOS SETUP GUIDE – www.hotpos.com.au – ph 1300 735 919


          Enter time in 24 hr format HH:MM eg 4:30pm = 16:30
          Press the” X/Date Time” Key
          Press “Clear” [C] Key

Set Date

          Turn Key to Program
          Enter date as YY:MM:DD
          Press the “X/Date Time” Key
          Press “Clear” [C] Key

Set GST for Departments

          Turn Key to PGM
          Enter 1 Press Subtotal (PGM 1)
          Press TAX PGM until the tax you want is selected (01 for GST, 00 for no tax)
          Press Departments
          Press Subtotal when finished ALL

Set Prices for Departments

          Turn Key to PGM
          Enter 1 Press Subtotal (PGM 1)
          Enter Price without using decimal point e.g. 150 =$1.50
          Press the Department Key you want to set the price against
          Press Subtotal when finished ALL

Set Names of Departments

          Turn Key to PGM
          Enter 2 Press Subtotal (PGM 2)
          Press the Department key that you want to name eg Department 1
          Use the Numeric Keys to choose the letters you want to use. There are 3 letters on the
          leading edge of each key. To move to the next letter use the arrow on the 00 key.
          Press Cash
          Press Subtotal when finished ALL




/users/darrylsullivan/!Hotpos/Product info/Cash registers/Casio/SE-C300 manual/Setup guide/SE-C300 setup guide V2.doc   QS12 - 2 -
          HOTPOS SETUP GUIDE – www.hotpos.com.au – ph 1300 735 919



Change Receipt Header

          Turn Key to PGM
          Enter 2 Press Subtotal (PGM 2)
          Enter the number of the line of the receipt you wish to program e.g. 232
          Press Subtotal
          Use the Numeric Keys to choose the letters you want to use. There are 3 letters on the
          leading edge of each key. To move to the next letter use the arrow on the “00” key.
          Press Cash
          Press Subtotal when finished ALL


Line #               Description                                         Default (24 Characters)
132                  1st Line of Logo Message                               YOUR RECEIPT
232                  2nd Line of Logo Message                                 THANK YOU
332                  3rd Line of Logo Message                                 CALL AGAIN
432                  4th Line of Logo Message
532                  1st Line of Commercial
                     Message
632                  2nd Line of Commercial
                     Message
732                  3rd Line of Commercial
                     Message
832                  4th Line of Commercial
                     Message
932                  1st Line of Bottom Message
1032                 2nd Line of Bottom Message
1132                 3rd Line of Bottom Message
1232                 4th Line of Bottom Message
:                    :
4032                 1st Line of Australian GST                          TAX INVOICE
                     Message
4132                 2nd Line of Australian GST                          * INDICATES
                     Message
4232                 3rd Line of Australian GST                            TAXABLE SUPPLY
                     Message




/users/darrylsullivan/!Hotpos/Product info/Cash registers/Casio/SE-C300 manual/Setup guide/SE-C300 setup guide V2.doc   QS12 - 3 -
          HOTPOS SETUP GUIDE – www.hotpos.com.au – ph 1300 735 919



Changing between Graphic Logo and Text receipt

          Turn Key to PGM
          Enter 3 Press Subtotal (PGM 3)
          Enter 2122
          Press Subtotal
          Enter Data from Table below    e.g. Text Receipt + Bottom Message = 4000200004
          Press Cash
          Press Subtotal to Finish

                                                                                    0 = Text
Logo Message Type                                                                 a
                                                                                    2 = Graphic                (a+b)
                                                                                    0 = Yes                    =0-6
Print Watermark                                                                   b
                                                                                    4 = No
Always 000                                                                                                       000
                                                                                    0 = No
Print Commercial Message on Receipts                                              a
                                                                                    1 = Yes                    (a + b)
                                                                                    0 = No                     =0-3
Print Bottom Message on Receipts                                                  b
                                                                                    2 = Yes
Always 0000                                                                                                     0000
                                                                                      0 = No
Print Australian GST MOF Message                                                                               =0-4
                                                                                      4 = Yes

Sending the Graphic Logo to the ECR

          Start the Program Called ‘CV10’
          Create a New Store by Clicking New
          Give it a Store Name
          Select the ECR Type by pressing New
          Then Click OK
          Then Click OK again.

          At this point you should close down the program and create a Graphic logo using the
          next procedure       ‘Creating Graphic Logo for Receipt Message’

          Double Click ‘Graphic Logo’
          Your Graphic Logo should appear in the New Window.
          If it has not, close down the program and try the procedure below again.
          Double click on the your graphic logo.
          It should now be sending to the ECR.




/users/darrylsullivan/!Hotpos/Product info/Cash registers/Casio/SE-C300 manual/Setup guide/SE-C300 setup guide V2.doc    QS12 - 4 -
          HOTPOS SETUP GUIDE – www.hotpos.com.au – ph 1300 735 919


Creating Graphic Logo for Receipt Message

          Open the Windows Program Called ‘Paint’
          The program should automatically create a new Blank Canvas
          Click on the Image Menu
          Select the Attributes Option
          Change the Width to be 384 pixels
          Change the Height to be 168 pixels
          Change the colours to be ‘Black and White’
          Press OK
          At this point, you can create an Image any way you want.
          Then Save the Bitmap by Clicking on the File Menu
          Select Save As
          Save the File to the Folder

          ‘C:\cvw\store001\Te100\Logo’ Folder. This may change if you have used more than one
          store or installed it to another folder.




/users/darrylsullivan/!Hotpos/Product info/Cash registers/Casio/SE-C300 manual/Setup guide/SE-C300 setup guide V2.doc   QS12 - 5 -

								
To top