Docstoc

1110 rh70 nokia service manual

Document Sample
1110 rh70 nokia service manual Powered By Docstoc
					   Nokia Customer Care




Service Manual

    RH-70 (Nokia 1110)
 Mobile Terminal
Part No: (9243364 (Issue 1, Part 1))




       Company Confidential




   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                        RH-70
Nokia Customer Care                                                     Amendment Record Sheet


Amendment Record Sheet

Amendment No          Date         Inserted By               Comments
 Original issue       07/2005      G Rudh




Page ii                            Company Confidential                 9243364 (Issue 1, Part 1)
                         Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Copyright                                                                                    Nokia Customer Care


Copyright
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without
the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Nokia X and Y are trademarks or registered trademarks of Nokia
Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental,
consequential or indirect damages howsoever caused.
The contents of this document are provided “as is”. Except as required by applicable law, no warranties of any
kind, either express or implied, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.
Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region.

IMPORTANT
This document is intended for use by qualified service personnel only.




9243364 (Issue 1, Part 1)                   Company Confidential                                           Page iii
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                     RH-70
Nokia Customer Care                                                                   Warnings and cautions


Warnings and cautions

Warnings
• IF THE DEVICE CAN BE INSTALLED IN A VEHICLE, CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH
  ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI-SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT
  CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/
  MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.
• THE PRODUCT MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES, FOR
  EXAMPLE, PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
• OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH
  THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE
  MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO
  BE SUBJECT TO INTERFERENCE.
• BEFORE MAKING ANY TEST CONNECTIONS, MAKE SURE YOU HAVE SWITCHED OFF ALL EQUIPMENT.

Cautions
• Servicing and alignment must be undertaken by qualified personnel only.
• Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
• Ensure solder, wire, or foreign matter does not enter the telephone as damage may result.
• Use only approved components as specified in the parts list.
• Ensure all components, modules, screws and insulators are correctly re-fitted after servicing and alignment.
• Ensure all cables and wires are repositioned correctly.
• Never test a mobile phone WCDMA transmitter with full Tx power, if there is no possibility to perform the
  measurements in a good performance RF-shielded room. Even low power WCDMA transmitters may disturb
  nearby WCDMA networks and cause problems to 3G cellular phone communication in a wide area.
• During testing never activate the GSM or WCDMA transmitter without a proper antenna load, otherwise GSM
  or WCDMA PA may be damaged.




Page iv                                   Company Confidential                       9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
For your safety                                                                          Nokia Customer Care


For your safety

QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect incompatible products.

CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect
incompatible products.




9243364 (Issue 1, Part 1)                  Company Confidential                                         Page v
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                       RH-70
Nokia Customer Care                                                                     Care and maintenance


Care and maintenance
This product is of superior design and craftsmanship and should be treated with care. The suggestions below
will help you to fulfil any warranty obligations and to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that
  will corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage
  batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When it warms up (to its normal temperature), moisture can form
  inside, which may damage electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.
• Do not paint the phone. Paint can clog the moving parts and prevent proper operation.
• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications or
  attachments could damage the phone and may violate regulations governing radio devices.
All of the above suggestions apply equally to the product, battery, charger or any accessory.




Page vi                                    Company Confidential                       9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
ESD protection                                                                              Nokia Customer Care


ESD protection
Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the
phone.
Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced
without ESD protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too, can be damaged by static electricity
discharge.
All ESD sensitive parts must be packed in metallized protective bags during shipping and handling outside any
ESD Protected Area (EPA).
Every repair action involving opening the product or handling the product components must be done under
ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an ESD Protected Area.
For more information and local requirements about ESD protection and ESD Protected Area, contact your local
Nokia After Market Services representative.




9243364 (Issue 1, Part 1)                   Company Confidential                                          Page vii
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                            RH-70
Nokia Customer Care                                                                           Battery information


Battery information
            Note: A new battery's full performance is achieved only after two or three complete charge and
            discharge cycles!
The battery can be charged and discharged hundreds of times but it will eventually wear out. When the
operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge the battery only with the chargers
approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a
charger for longer than a week, since overcharging may shorten its lifetime. If left unused a fully charged battery
will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
For good operation times with Ni-Cd/NiMh batteries, discharge the battery from time to time by leaving the
product switched on until it turns itself off (or by using the battery discharge facility of any approved accessory
available for the product). Do not attempt to discharge the battery by any other means.
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen)
causes direct connection of the + and - terminals of the battery (metal strips on the battery) for example when
you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the
connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the
capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A
phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries'
performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire!
Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste.




Page viii                                    Company Confidential                       9243364 (Issue 1, Part 1)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Company Policy                                                                            Nokia Customer Care


Company Policy
Our policy is of continuous development; details of all technical modifications will be included with service
bulletins.
While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any
errors are found by the reader, NOKIA MOBILE PHONES Business Group should be notified in writing/e-mail.
Please state:
• Title of the Document + Issue Number/Date of publication
• Latest Amendment Number (if applicable)
• Page(s) and/or Figure(s) in error

Please send to:
NOKIA CORPORATION
Nokia Mobile Phones Business Group
Nokia Customer Care
PO Box 86
FIN-24101 SALO
Finland
E-mail: Service.Manuals@nokia.com




9243364 (Issue 1, Part 1)                  Company Confidential                                         Page ix
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                     RH-70
Nokia Customer Care                                                          Company Policy




                          (This page left intentionally blank.)




Page x                          Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Nokia 1110 Service Manual Structure                                           Nokia Customer Care


Nokia 1110 Service Manual Structure
1   General information
2   Parts and layouts
3   Phoenix service software
4   Service Tools
5   Disassembly and reassembly instructions




9243364 (Issue 1, Part 1)                 Company Confidential                            Page xi
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                               RH-70
Nokia Customer Care                                               Nokia 1110 Service Manual Structure




                          (This page left intentionally blank.)




Page xii                        Company Confidential                         9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




          1 — General information




9243364 (Issue 1, Part 1)             Company Confidential                Page 1–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                     General information




                          (This page left intentionally blank.)




Page 1–2                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
General information                                                                                                                                                Nokia Customer Care


                                                                                 Table of Contents
Product selection.............................................................................................................................................................................1–5
Display and keypad features.......................................................................................................................................................1–5
Features..............................................................................................................................................................................................1–5
   Hardware features....................................................................................................................................................................1–5
   Software features......................................................................................................................................................................1–5
   UI features...................................................................................................................................................................................1–6
   Mobile enhancements..............................................................................................................................................................1–6
Technical specifications................................................................................................................................................................1–7
   General specifications..............................................................................................................................................................1–7
   Battery endurance....................................................................................................................................................................1–7
   Environmental conditions......................................................................................................................................................1–8
   Electrical characteristics..........................................................................................................................................................1–8


List of Tables
Table 1 Power...................................................................................................................................................................................1–6
Table 2 Car.........................................................................................................................................................................................1–7
Table 3 Audio....................................................................................................................................................................................1–7
Table 4 Xpress-on™ covers...........................................................................................................................................................1–7
Table 5 Normal and extreme voltages.....................................................................................................................................1–8
Table 6 Current consumption......................................................................................................................................................1–9


List of Figures
Figure 1 RH-70 product picture...................................................................................................................................................1–5




9243364 (Issue 1, Part 1)                                             Company Confidential                                                                                              Page 1–3
                                                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                     General information




                          (This page left intentionally blank.)




Page 1–4                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
General information                                                                 Nokia Customer Care


    Product selection
The RH-70 is a dual band transceiver unit designed for the GSM900 and GSM1800 networks.




                                        Figure 1 RH-70 product picture

    Display and keypad features
• High resolution B&W display (96x68 pixels)
• 4UI-style, 5-way navigation key including selection key,
• Rubber keymat

    Features

Hardware features
•   GSM E900/1800
•   AMR/HR/FR/EFR codecs
•   Internal antenna
•   Charger plug
•   Headset connector
•   Internal vibrator
•   User changeable front- and back covers and top cap
•   SIM (1.8 and 3.0 V)

Software features
•   OS: CUI
•   UI Style: Jack 4
•   MIDP 2.0 Java, with latest APIs
•   20 polyphonic ringing tones




9243364 (Issue 1, Part 1)                   Company Confidential                              Page 1–5
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                  RH-70
Nokia Customer Care                                                                 General information


UI features

 Messaging            • Multimedia messaging: send and receive messages containing text, an audio
                        clip, and an image to other compatible devices (maximum message size: up
                        to 100kB)
                      • SMS messaging
                      • Predictive text input
                      • Asia-Pacific: English, Chinese Simplified, Chinese Traditional, Thai, Philipino,
                        Vietnamese, Bahasa Indonesia, Bahasa Malaysia, Hindi
                      • Europe and Africa: Danish, Dutch, English, French, Finnish, German, Icelandic,
                        Italian, Portugese, Spanish, Swedish, Norwegian, Turkish, Greek, Bulgarian,
                        Ukranian, Hebrew, Arabic, Slovakian, Czech, Hungarian, Polish, Romanian,
                        Serbian, Croatian, Slovenian, Russian, Estonian, Latvian, Lithuanian
                      • Non-predictive text input: Urdu, Farsi, Zulu, Xhosa, Sesotho, Swahili, Merathi,
                        Tamil, Gujarati, Bengali
 Memory functions     • Phone book (up to 300 entries)
 Connectivity         • Plug and play connector
 Call management      • Speed dialing: up to 8 names (keys 2-9)
                      • Last number redial from dialed calls list (dial key brings out the dialed calls
                        list)
                      • Automatic redial (max 10 attempts)
                      • Automatic answer (works with headset or car kit only)
                      • Call waiting, call hold, call divert, and call timer
                      • Automatic and manual network selection
                      • Vibrating alert
 Voice features       • Integrated handsfree speaker
 Personalise          • Graphics, icons, animations, logos
                      • 3 games available . The selection of games depends on the region the phone
                        is sold in (Snake, Bunny Brains, Dice, Butler, Carrom , Soccer league, Cricket
                        cup, Rapid Rolls
                      • Ringing tones: Polyphonic tones
                      • Themes: possibility to download new themes
 Phone features       • Phone Features
                      • Alarm clock Calendar

Mobile enhancements
                                       Table 1 Power

Type                    Name
 BL-5C                  Battery 900 mAh Li-Ion
 AC-1                   Retractable charger
 ACP-12                 Travel charger
 LCH-12                 Mobile charger



Page 1–6                          Company Confidential                         9243364 (Issue 1, Part 1)
                        Copyright ©2005 Nokia. All Rights Reserved.
RH-70
General information                                                                        Nokia Customer Care

                                                  Table 2 Car

Type                            Name
 CK-10                           Nokia car kit
 HF-8                            Nokia plug-in car handsfreet
 MP-2                            Microphone
 CR-39                           Nokia universal holder

                                                 Table 3 Audio

Type                            Name
 HDB-5                           Boom Headset
 HDE-2                           Headset
 HS-7                            Dual Headset
 HDA-9                           TTY Adapter

                                           Table 4 Xpress-on™ covers

Type                            Name
 CC 232D                         EMEA colors: Gray, Blue, Orange, except APAC, which only have gray and blue.

   Technical specifications

General specifications

Unit                        Dimension (mm)                Weight (g)                 Volume (cc)
 Transceiver with BL-5C      104x43x17                    80                          70
 900mAh Li-Ion battery
 pack

Battery endurance

Nokia measurements of operation times in GSM900/1800

Talk time
 Battery: BL-5C 900mAh                                    Up to 180 min

Standby time
 Battery: BL-5C 900mAh                                    Up to 300 min

         Note: Variation in operation times will occur depending on SIM card, network settings and usage. Talk
         time is increased by up to 30% if half rate is active and reduced by 5% if enhanced full rate is active.




9243364 (Issue 1, Part 1)                  Company Confidential                                        Page 1–7
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                       General information


Environmental conditions

Environmental             Ambient temperature                         Notes
condition
 Normal operation         -15 oC ... +55 oC                           Specifications fulfilled
 Reduced performance      -30 ...15 oC and +55oC ... +70 oC           Operational only for short periods
 Intermittent or no       -40 oC ... -30 oC and +70 oC ... +85oC      Operation not guaranteed but an
 operation                                                            attempt to operate will not damage
                                                                      the phone
 No operation or          <-40 oC and >+85 oC                         No storage. An attempt to operate
 storage                                                              may cause permanent damage
 Charging allowed         -15 oC ... +55 oC
 Long term storage        0 oC ... +85 oC
 conditions
 Humidity and water                                                   Relative humidity range is 5 to 95%.
 resistance                                                           Condensed or dripping water may
                                                                      cause intermittent malfunctions.
                                                                      Protection against dripping water has
                                                                      to be implemented in (enclosure)
                                                                      mechanics.
                                                                      Continuous dampness will cause
                                                                      permanent damage to the module.

Electrical characteristics
                                 Table 5 Normal and extreme voltages

Voltage                              Voltage (V)                         Condition
                                               General conditions
 Nominal voltage                      3.90V                               a
 Lower extreme voltage                3.30V                               b
 Higher extreme voltage               4.30V                               c
                                              HW shutdown voltages
 Vmstr+                               2.1V ± 0,1V                         Off to on
 Vmstr-                               1.9V ± 0,1V                         On to off
                                              SW shutdown voltages
 SW shutdown                          3. 1V                               In call
 SW shutdown                          3. 2V                               In idle
                                              Min operating voltage
 Vcoff+                               3. 1V ± 0,1V                        Off to on
 Vcoff-                               2. 8V ± 0,1V                        On to off

Page 1–8                                  Company Confidential                        9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
General information                                                                         Nokia Customer Care

Voltage                               Voltage (V)                           Condition
                                               HW reset demands
 Min                                   1. 0V                                 d
 Max                                   --

a. The nominal voltage is defined as being 15% higher than the lower extreme voltage. TA will test with this
nominal voltage at an 85% range (0.85x3.9V a 3.3V).
b. This limit is set to be above SW shutdown limit in TA.
c. During fast charging of an empty battery, this voltage might exceed this value. Voltages between 4.20 and
4.60 might appear for a short while.
d. The minimum battery cell voltage required for the reset circuitry to turn on. This is not confirmed by measures
at pt.

                                        Table 6 Current consumption

Condition              Min                     Typical               Max                    Unit
 Call (MoU)                                    .                                            mA
 (E)GSM 900                                    208
 GSM 1800                                      188
 Idle (MoU)                                    2.72
 Power off              150                                           250                   mA




9243364 (Issue 1, Part 1)                   Company Confidential                                        Page 1–9
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                     General information




                          (This page left intentionally blank.)




Page 1–10                       Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




                2 — Parts and layouts




9243364 (Issue 1, Part 1)             Company Confidential                Page 2–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                        Parts and layouts




                          (This page left intentionally blank.)




Page 2–2                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                                                                                                            Nokia Customer Care


                                                                              Table of Contents
Exploded view..................................................................................................................................................................................2–5
Mechanical parts list.......................................................................................................................................................................2–6
Spare parts overview.....................................................................................................................................................................2–7
SWAP phones....................................................................................................................................................................................2–8
Component parts list......................................................................................................................................................................2–8
Component layouts......................................................................................................................................................................2–15


List of Tables
Table 7 Mechanical parts list.......................................................................................................................................................2–6
Table 8 SWAP phones for RH-70.................................................................................................................................................2–8
Table 9 Component parts list......................................................................................................................................................2–8


List of Figures
Figure 2 Exploded view.................................................................................................................................................................2–5
Figure 3 Spare parts overview....................................................................................................................................................2–7
Figure 4 Component layout, bottom side (1jv_50e)..........................................................................................................2–15
Figure 5 Component layout, top side (1jv_50e)..................................................................................................................2–15




9243364 (Issue 1, Part 1)                                          Company Confidential                                                                                          Page 2–3
                                                         Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                        Parts and layouts




                          (This page left intentionally blank.)




Page 2–4                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                         Nokia Customer Care


   Exploded view




                                      Figure 2 Exploded view




9243364 (Issue 1, Part 1)             Company Confidential                          Page 2–5
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                    RH-70
Nokia Customer Care                                                                     Parts and layouts


  Mechanical parts list
                                          Table 7 Mechanical parts list

   ITEM/
  CIRCUIT          QTY        PART NAME
    REF.
 * = not available as spare part
    I001              1        A-cover
    I002              1        KEYMAT
    I003              6        Screws T6+
    I004              1        LCD shielding
    I005              1        Acoustic channel
    I006              1        LCD module
    I007              1        Light guide assembly
    I008              1        Domesheet
    I009              1        Engine module (not supplied)
    I010              1        BB shielding lid assembly
    I011              1        RF shielding lid
    I012              1        FEM shielding lid
    I013*             1        Antenna (A1)
    I014*             1        IHF (A1)
    I015*             1        Release button
    I016*             1        SIM lid (A2)
    I017              1        Microphone
    I018              1        Easy flash connector (A2)
    I019*             4        D-cover (A2)
    I020              1        Type label
    I021              1        B-cover
    I022              1        Easy flash connector cap




Page 2–6                                     Company Confidential                9243364 (Issue 1, Part 1)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                         Nokia Customer Care


   Spare parts overview




                                   Figure 3 Spare parts overview




9243364 (Issue 1, Part 1)             Company Confidential                          Page 2–7
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                  RH-70
Nokia Customer Care                                                                   Parts and layouts


  SWAP phones
                                     Table 8 SWAP phones for RH-70

SWAP phones for RH-70
 RH-70 SWAP ENGINE EURO-C
 RH-70 SWAP ENGINE EURO-C FRANCE
 RH-70 EURO-C TURKEY
 RH-70 SWAP ENGINE EURO-K
 RH-70 SWAP ENGINE UKR
 RH-70 SWAP ENGINE EURO-L SOUTH AFRICA
 RH-70 SWAP ENGING APAC-S, Singapore
 RH-70 SWAP ENGINE APAC-T, Philippines

  Component parts list
                                      Table 9 Component parts list

Item ref    PWB side        X/Y      Object name                                 Value
 A7001       Top            O    5    SHIELD_BB                                   ~
 A7002       Top            J    6    SHIELD_RF_ASIC                              ~
 A7003       Top            J    3    SHIELD_FEM                                  ~
 B2200       Top            O    7    CRYSTAL 32.768KHZ+-20PPM 12.5PF             32.768KHz
 B7600       Top            K    5    CRYSTAL 26MHZ+-10PPM 15.5PF                 26MHz
 C2000       Top            G    3    Chipcap 5% NP0                              27p
 C2001       Top            G    2    Chipcap 5% NP0                              10p
 C2002       Top            G    4    CHIPTCAP 150U M 10V 6X3.2X1.5               150u_10V
 C2003       Top            S    5    Chipcap 5% NP0                              22p
 C2004       Top            R    5    Chipcap 5% NP0                              22p
 C2005       Top            R    5    Chipcap 5% NP0                              22p
 C2006       Top            R    5    Chipcap 5% NP0                              22p
 C2007       Top            S    7    CHIPCAP Y5V 100N Z 25V 0603                 100n
 C2008       Top            R    4    Chipcap X7R 10% 16V 0402                    10n
 C2009       Top            R    4    Chipcap X7R 10% 16V 0402                    10n
 C2010       Top            R    5    Chipcap X7R 10% 16V 0402                    10n
 C2011       Top            S    3    CHIPCAP X5R 1U K 6V3 0603                   1u0
 C2012       Top            R    4    Chipcap X7R 10% 16V 0402                    10n
 C2013       Top            R    3    Chipcap X7R 10% 50V 0402                    1n0
 C2017       Top            G    5    Chipcap 5% NP0                              33p

Page 2–8                                  Company Confidential                9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                             Nokia Customer Care

Item ref      PWB side      X/Y      Object name                              Value
 C2151        Top           N    7    CHIP ARRAY X5R 2X33N K 10V 0405         2x33n
 C2152        Top           S    3    Chipcap 5% NP0                          10p
 C2153        Bottom        B    6    Chipcap 5% NP0                          47p
 C2154        Bottom        B    7    Chipcap 5% NP0                          47p
 C2155        Top           N    6    CHIP ARRAY X5R 2X33N K 10V 0405         2x33n
 C2157        Top           O    8    Chipcap 5% NP0                          100p
 C2159        Top           N    7    CHIPCAP X7R 15N K 16V 0402              15n
 C2161        Top           N    8    CHIPCAP X5R 100N M 16V 0402             100n
 C2164        Top           N    6    CHIP ARRAY NP0 2X27P K 25V 0405         2x27p
 C2165        Top           N    7    CHIP ARRAY X5R 2X1N K 16V 0405          2x1n
 C2171        Top           N    8    CHIPCAP X5R 2U2 K 6V3 0603              2u2
 C2180        Top           N    7    CHIPCAP X7R 15N K 16V 0402              15n
 C2181        Top           M    7    CHIPCAP X5R 100N K 10V 0402             100n
 C2182        Top           M    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2200        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2202        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2203        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2204        Top           P    5    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2205        Top           P    5    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2208        Top           P    4    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2220        Top           M    7    Chipcap X7R 10% 16V 0402                10n
 C2222        Top           P    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2223        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2225        Top           M    6    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2226        Top           P    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2227        Top           M    6    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2230        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2233        Top           O    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2235        Top           M    7    CHIPCAP X5R 1U K 6V3 0603               1u0
 C2236        Top           M    5    CHIPCAP X5R 100N K 10V 0402             100n
 C2237        Top           M    5    CHIPCAP X5R 100N K 10V 0402             100n
 C2239        Top           P    5    CHIPCAP X5R 100N K 10V 0402             100n
 C2240        Top           M    6    Chipcap X7R 10% 16V 0402                10n
 C2241        Top           M    6    Chipcap X7R 10% 50V 0402                1n0
 C2242        Top           M    6    Chipcap X7R 10% 50V 0402                1n0

9243364 (Issue 1, Part 1)                 Company Confidential                          Page 2–9
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                            RH-70
Nokia Customer Care                                                             Parts and layouts

Item ref    PWB side   X/Y      Object name                                 Value
 C2261       Top       P    6    CHIPCAP X5R 4U7 K 10V 0805                  4u7
 C2287       Top       M    5    CHIPCAP X5R 100N K 10V 0402                 100n
 C2330       Top       G    2    Chipcap 5% NP0                              33p
 C2331       Top       P    5    CHIPCAP X5R 1U K 6V3 0603                   1u0
 C2332       Top       P    5    CHIPCAP X5R 4U7 K 10V 0805                  4u7
 C2400       Bottom    U    4    CHIPCAP X5R 1U K 16V 0603                   1u0
 C2401       Bottom    U    6    CHIPCAP X5R 1U K 6V3 0603                   1u0
 C2402       Bottom    C    2    CHIPCAP X5R 100N K 10V 0402                 100n
 C2403       Bottom    C    2    CHIPCAP X5R 100N K 10V 0402                 100n
 C2405       Top       P    5    Chipcap 5% NP0                              47p
 C2700       Top       R    4    CHIPCAP X5R 100N K 10V 0402                 100n
 C2880       Top       O    4    Chipcap X7R 10% 16V 0402                    10n
 C2881       Top       P    3    CHIPCAP X5R 100N K 10V 0402                 100n
 C2882       Top       P    3    Chipcap X7R 10% 16V 0402                    10n
 C2883       Top       O    2    Chipcap X7R 10% 16V 0402                    10n
 C2884       Top       O    2    CHIPCAP X5R 100N K 10V 0402                 100n
 C2885       Top       P    3    Chipcap X7R 10% 16V 0402                    10n
 C2886       Top       P    3    CHIPCAP X5R 100N K 10V 0402                 100n
 C2887       Top       O    2    Chipcap X7R 10% 16V 0402                    10n
 C2900       Top       K    7    Chipcap X7R 10% 50V 0402                    1n0
 C3030       Top       N    2    Chipcap X7R 10% 16V 0402                    10n
 C3031       Top       N    2    CHIPCAP X5R 100N K 10V 0402                 100n
 C3032       Top       N    2    CHIPCAP X5R 100N M 16V 0402                 100n
 C7604       Top       I    6    CHIPCAP NP0 0P5 C 50V 0402                  0p5
 C7607       Top       I    7    Chipcap +-0.25pF NP0                        1p2
 C7610       Top       I    8    Chipcap 5% NP0                              10p
 C7611       Top       I    7    Chipcap 5% NP0                              10p
 C7612       Top       I    7    Chipcap 5% NP0                              10p
 C7613       Top       I    7    CHIPCAP X5R 1U K 6V3 0402                   1u0
 C7614       Top       J    7    Chipcap +-0.25pF NP0                        4p7
 C7620       Top       K    7    CHIPCAP X5R 2U2 K 6V3 0603                  2u2
 C7623       Top       J    7    Chipcap 5% NP0                              22p
 C7624       Top       J    8    CHIPCAP X5R 100N K 10V 0402                 100n
 C7625       Top       J    6    Chipcap 5% NP0                              22p
 C7627       Top       J    5    Chipcap 5% NP0                              56p

Page 2–10                            Company Confidential                9243364 (Issue 1, Part 1)
                           Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                              Nokia Customer Care

Item ref      PWB side      X/Y      Object name                               Value
 C7628        Top           J    5    Chipcap 5% NP0                           56p
 C7630        Top           K    6    Chipcap 5% NP0                           22p
 C7631        Top           D    3    CHIPCAP NP0 0P5 C 50V 0402               0p5
 C7634        Top           I    7    CHIPCAP X5R 100N K 10V 0402              100n
 C7635        Top           K    6    CHIPCAP X5R 100N K 10V 0402              100n
 C7636        Top           K    6    Chipcap +-0.25pF NP0                     1p8
 C7637        Top           K    2    Chipcap 5% X7R                           1n0
 C7638        Top           K    2    Chipcap 5% NP0                           33p
 C7639        Top           J    7    CHIPCAP NP0 270P J 25V 0402              270p
 C7641        Top           J    7    CHIPCAP NP0 270P J 25V 0402              270p
 C7643        Top           K    6    CHIPCAP X5R 100N K 10V 0402              100n
 C7644        Top           J    7    Chipcap 5% X7R                           560p
 C7645        Top           I    7    Chipcap 5% X7R                           560p
 C7655        Top           I    5    Chipcap 5% NP0                           10p
 C7656        Top           J    5    CHIPCAP X5R 100N K 10V 0402              100n
 C7657        Top           K    7    Chipcap 5% NP0                           22p
 C7658        Top           J    7    Chipcap 5% NP0                           22p
 C7659        Top           I    6    Chipcap 5% NP0                           22p
 C7668        Top           I    6    Chipcap 5% NP0                           22p
 C7669        Top           K    8    CHIPCAP NP0 3N9 J 25V 0805               3n9
 C7700        Top           K    3    Chipcap 5% NP0                           33p
 C7701        Top           K    3    Chipcap 5% NP0                           33p
 C7702        Top           K    4    Chipcap 5% NP0                           33p
 C7711        Top           I    2    CHIPCAP X5R 2U2 K 10V 0805               2u2
 C7712        Top           I    4    Chipcap 5% NP0                           15p
 C7713        Top           I    2    Chipcap 5% NP0                           27p
 C7714        Top           K    3    Chipcap 5% NP0                           27p
 C7720        Top           K    4    Chipcap 5% NP0                           33p
 C7725        Top           K    3    Chipcap 5% NP0                           120p
 C7726        Top           J    2    Chipcap 5% NP0                           22p
 C7727        Top           K    2    Chipcap 5% NP0                           10p
 C7728        Top           K    2    CHIPCAP NP0 0P5 C 50V 0402               0p5
 D2200        Top           O    5    UEMCLITE V2.2 WD ENA LEADFREE TFBGA120   ~
 D2800        Top           O    3    UPP2M V2 10X10                           ~
 D3000        Top           M    3    FLASH 2MX16 1.8/1.8V VFBGA44 PBFREE      2Mx16

9243364 (Issue 1, Part 1)                 Company Confidential                          Page 2–11
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                             RH-70
Nokia Customer Care                                                              Parts and layouts

Item ref    PWB side   X/Y      Object name                                 Value
 F2000       Top       T    7    SM FUSE FF 2A 32V 0402                      2.0A
 H2400       Bottom    C    3    SM CONN BTB 2X5 F P0.5                      ~
 L2000       Top       T    7    FERR.BEAD 0R03 42R/100MHZ 3A 0805           42R/100MHz
 L2001       Top       R    3    CHIP BEAD ARRAY 2X1000R 0405                2x1000R/100MHz
 L2002       Top       R    4    CHIP BEAD ARRAY 2X1000R 0405                2x1000R/100MHz
 L2170       Top       S    3    FERRITE BEAD 0R5 600R/100MHZ 0603           600R/100MHz
 L2180       Top       M    7    FERR.BEAD 220R/100M 2A 0R05 0603            220R/100MHz
 L2181       Top       M    7    FERR.BEAD 220R/100M 2A 0R05 0603            220R/100MHz
 L2182       Bottom    B    6    CHIP COIL 33N J Q23/800M 0402               33nH
 L2183       Bottom    B    6    CHIP COIL 33N J Q23/800M 0402               33nH
 L2400       Bottom    U    6    CHOKE 22U M0.33A 1R5 3.3X3.3X1.3            22uH
 L7602       Top       I    7    CHIP COIL 10N J Q30/800M 0402               10nH
 L7603       Top       I    7    CHIP COIL 10N J Q30/800M 0402               10nH
 L7604       Top       I    6    CHIP COIL 2N2+-0N3 Q30/800M 0402            2n2H
 L7605       Top       I    6    CHIP COIL 2N2+-0N3 Q30/800M 0402            2n2H
 L7607       Top       H    6    CHIP COIL 2N2+-0N3 Q30/800M 0402            2n2H
 M2000       Top       G    6    SMD VIBRA MOTOR 1.3V 90MA 9000RPM           ~
 N2150       Top       M    7    PW AMP TPA2010D1YZF 250KHZ                  ~
 N2160       Top       L    7    TI ANALOG SWITCH TS5A3159DCKR               ~
 N2161       Top       L    7    TI ANALOG SWITCH TS5A3159DCKR               ~
 N2400       Bottom    T    6    DC/DC CONV LM3500/ TK65600 USMD8            ~
 N7600       Top       J    7    HUGIN + PMB3258V1.1 B9C PGVGFN48-4/-6       ~
 N7700       Top       J    3    FEM RF3282E5.1 4B-TX 2B-RX                  ~
 R2000       Top       G    3    CHIP VARISTOR VWM5.6V VC15.5 0402           5.6V/15V/0.05J
 R2001       Top       Q    3    NTC RES 47K J B=4050+-3% 0402               47k
 R2002       Top       R    5    Resistor 5% 63mW                            100R
 R2003       Top       R    5    Resistor 5% 63mW                            100R
 R2004       Top       R    5    Resistor 5% 63mW                            100R
 R2005       Top       S    5    Resistor 5% 63mW                            100R
 R2006       Top       R    5    RES VARISTOR 14/350V 3PF 0402               14/350V
 R2007       Top       R    4    CHIP VARISTOR VWM14V VC50V 0402             14V/50V
 R2008       Top       S    4    CHIP VARISTOR VWM14V VC50V 0402             14V/50V
 R2009       Top       R    4    CHIP VARISTOR VWM14V VC50V 0402             14V/50V
 R2010       Top       S    3    Resistor 5% 63mW                            100k
 R2011       Top       R    4    RES NETWORK 0W06 2X10R J 0404               2x10R

Page 2–12                            Company Confidential                9243364 (Issue 1, Part 1)
                           Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                             Nokia Customer Care

Item ref      PWB side      X/Y      Object name                              Value
 R2013        Top           R    5    CHIP VARISTOR VWM5.6V VC15.5 0402       5.6V/15V/0.05J
 R2020        Top           R    5    ASIP 4XESD **PB-FREE** BGA5             ~
 R2027        Top           R    5    Resistor 5% 63mW                        10k
 R2068        Top           S    2    RES NETWORK 0W03 4X22R J 0804           4x22R
 R2069        Top           S    2    Resistor 5% 63mW                        1k0
 R2070        Top           S    2    CHIP VARISTOR VWM5.6V VC15.5 0402       5.6V/15V/0.05J
 R2150        Top           N    7    RES NETWORK 0W06 2X1K0 J 0404           2x1k0
 R2151        Top           M    7    Resistor 5% 63mW                        10R
 R2152        Top           N    7    Resistor 5% 63mW                        10k
 R2153        Top           N    7    RES NETWORK 0W06 2X2K2 J 0404           2x2k2
 R2154        Top           N    7    RES NETWORK 0W06 2X2K2 J 0404           2x2k2
 R2155        Top           L    6    Resistor 5% 63mW                        10R
 R2156        Top           O    7    Resistor 5% 63mW                        2k2
 R2158        Top           N    7    Resistor 5% 63mW                        18k
 R2159        Top           N    7    Resistor 5% 63mW                        18k
 R2160        Top           L    6    Resistor 5% 63mW                        100k
 R2171        Top           N    8    Resistor 5% 63mW                        220R
 R2200        Top           P    6    CHIPRES 0W25 0R22 J 0805                0R22
 R2202        Top           M    7    Resistor 5% 63mW                        100k
 R2203        Top           M    7    Resistor 5% 63mW                        100k
 R2204        Top           M    6    Resistor 5% 63mW                        100k
 R2205        Top           M    6    RES NETWORK 0W06 2X10K J 0404           2x10k
 R2206        Top           M    7    Resistor 5% 63mW                        100k
 R2207        Top           L    4    Resistor 5% 63mW                        1k0
 R2400        Bottom        U    5    Resistor 5% 63mW                        33R
 R2406        Top           O    2    Resistor 5% 63mW                        220R
 R2407        Top           P    2    Resistor 5% 63mW                        220R
 R2408        Top           P    2    Resistor 5% 63mW                        220R
 R2409        Bottom        T    4    Resistor 5% 63mW                        10k
 R2700        Top           P    4    ASIP SIM INTERFACE **LOW CAP**BGA8      ~
 R2900        Top           K    7    Resistor 5% 63mW                        330R
 R3030        Top           O    2    Resistor 5% 63mW                        4k7
 R7605        Top           K    7    Resistor 5% 63mW                        22R
 R7606        Top           H    7    Chipres 0W06 jumper 0402                0R
 R7609        Top           K    6    Resistor 1% 63mW                        12k

9243364 (Issue 1, Part 1)                 Company Confidential                         Page 2–13
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                              RH-70
Nokia Customer Care                                                               Parts and layouts

Item ref    PWB side   X/Y      Object name                                 Value
 R7610       Top       M    5    RES NETWORK 0W06 2X5K6 J 0404               2x5k6
 R7611       Top       M    5    RES NETWORK 0W06 2X5K6 J 0404               2x5k6
 R7615       Top       H    8    Resistor 5% 63mW                            100R
 R7616       Top       H    7    Resistor 5% 63mW                            100R
 R7617       Top       H    7    Resistor 5% 63mW                            100R
 R7619       Top       J    8    Resistor 5% 63mW                            3k3
 R7630       Top       K    6    Resistor 5% 63mW                            100k
 R7631       Top       K    7    Resistor 5% 63mW                            18k
 R7632       Top       K    6    Resistor 5% 63mW                            39R
 R7633       Top       K    2    NTC RES 47K J B=4050+-3% 0402               47k
 R7635       Top       K    2    Resistor 5% 63mW                            1k0
 R7663       Top       K    8    Resistor 5% 63mW                            4k7
 R7700       Top       I    5    Resistor 5% 63mW                            1k0
 R7701       Top       I    5    Resistor 5% 63mW                            1k0
 R7703       Top       J    5    Chipres 0W06 jumper 0402                    0R
 R7704       Top       K    3    Resistor 5% 63mW                            1k0
 R7705       Top       K    3    Resistor 5% 63mW                            1k0
 R7706       Top       K    3    Resistor 5% 63mW                            1k0
 R7707       Top       I    5    Resistor 5% 63mW                            1k0
 R7709       Top       I    5    Chipres 0W06 jumper 0402                    0R
 R7711       Top       J    4    RES NETWORK 0W04 1DB ATT 0404               870R/5R77/870R
 R7714       Top       J    2    RES NETWORK 0W04 1DB ATT 0404               870R/5R77/870R
 R7720       Top       K    4    Resistor 5% 63mW                            1k0
 R7732       Top       K    2    Resistor 5% 63mW                            10k
 R7733       Top       K    2    Resistor 5% 63mW                            100R
 V2000       Top       S    7    ASIP TVS BGA4                               ~
 V2160       Top       L    6    TR PDTC114EE N 50V RB=RBE=10K EM3           ~
 V2400       Bottom    U    5    LED WHITE 90-335MCD 15MA 0DEG 1608          ~
 V2401       Bottom    U    3    TR PDTA114EE RB=RBE=10K 50V SC75            ~
 V7600       Top       K    6    DI CAP 40/15.8PF 1/3V SCD80                 ~
 X2005       Top       G    3    SM LYNX BATT.CONN 3POL 12V 2A H7            ~
 X2060       Bottom    T    3    MODULE ID COMPONENT 2.8X1.8X0.3             ~
 X2700       Top       Q    4    SM SIM CONN 6POL P2.54 H1.8                 ~
 Z2400       Top       Q    3    ASIP EMIF10-1K010F2 **PB-FREE**             ~
 Z7600       Top       H    6    SAW FILT 1842,5+-37.5MHZ 2.0X1.6            1842.5MHz

Page 2–14                            Company Confidential                9243364 (Issue 1, Part 1)
                           Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Parts and layouts                                                               Nokia Customer Care

Item ref      PWB side      X/Y       Object name                               Value
 Z7602        Top           H    7     SAW FILT 942.5+-17.5MHZ 2.0X1.6          942.5MHz
 Z7603        Top           J    5     SILICON FILT 869.5+-45.5MHZ P-TSLP-7-4   869.5MHz
 Z7604        Top           J    5     SILICON FILT 1810+-100MHZ P-TSLP-7-4     1710-1910MHz

   Component layouts

Component layout, bottom side




                            Figure 4 Component layout, bottom side (1jv_50e)

Component layout, top side




                                Figure 5 Component layout, top side (1jv_50e)




9243364 (Issue 1, Part 1)                 Company Confidential                             Page 2–15
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                        Parts and layouts




                          (This page left intentionally blank.)




Page 2–16                       Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




 3 — Phoenix service software




9243364 (Issue 1, Part 1)             Company Confidential                Page 3–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Phoenix service software




                          (This page left intentionally blank.)




Page 3–2                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                                                                                       Nokia Customer Care


                                                                               Table of Contents
Introduction......................................................................................................................................................................................3–5
   Read this first..............................................................................................................................................................................3–5
Service software installation.......................................................................................................................................................3–5
   Phoenix installation steps in brief.......................................................................................................................................3–5
   Installing Phoenix.....................................................................................................................................................................3–6
   Phoenix update installation................................................................................................................................................3–11
   Uninstalling Phoenix..............................................................................................................................................................3–12
   Repairing Phoenix installation...........................................................................................................................................3–14
   Phoenix service software data package overview.......................................................................................................3–15
   Installing Phoenix data package........................................................................................................................................3–16
   Uninstalling Phoenix data package..................................................................................................................................3–20
Service software instructions...................................................................................................................................................3–21
   Configuring users in Phoenix..............................................................................................................................................3–21
   Managing connections in Phoenix....................................................................................................................................3–22
   Installing Flash support files for FPS-8* and FLS-4*.....................................................................................................3–25
   Updating FPS-8 Flash prommer software.......................................................................................................................3–28
   Activating FPS-8.......................................................................................................................................................................3–30
   Deactivating FPS-8..................................................................................................................................................................3–32
   Updating JBV-1 docking station software.......................................................................................................................3–33


List of Figures
Figure 6 Dongle not found...........................................................................................................................................................3–6
Figure 7 Preparing setup..............................................................................................................................................................3–7
Figure 8 Welcome dialog..............................................................................................................................................................3–7
Figure 9 Disclaimer text................................................................................................................................................................3–8
Figure 10 Destination folder........................................................................................................................................................3–8
Figure 11 Installation status 1....................................................................................................................................................3–9
Figure 12 Installation status 2....................................................................................................................................................3–9
Figure 13 Registering components 1.....................................................................................................................................3–10
Figure 14 Restart computer.......................................................................................................................................................3–10
Figure 15 Registering components 2.....................................................................................................................................3–11
Figure 16 Finish installation......................................................................................................................................................3–11
Figure 17 Installation interrupted...........................................................................................................................................3–12
Figure 18 Remove program.......................................................................................................................................................3–12
Figure 19 Uninstallation status................................................................................................................................................3–13
Figure 20 Finish uninstallation.................................................................................................................................................3–13
Figure 21 Restart computer.......................................................................................................................................................3–14
Figure 22 Repair program..........................................................................................................................................................3–15
Figure 23 Finish repair installation.........................................................................................................................................3–15
Figure 24 Extracting files............................................................................................................................................................3–16
Figure 25 Continue data package installation.....................................................................................................................3–17
Figure 26 Data package setup information..........................................................................................................................3–17
Figure 27 Data package destination folder..........................................................................................................................3–18
Figure 28 Start copying files......................................................................................................................................................3–18
Figure 29 Data package installation status..........................................................................................................................3–19
Figure 30 Finish data package installation..........................................................................................................................3–19
Figure 31 Uninstalling Phoenix data package.....................................................................................................................3–20
Figure 32 Finish data package uninstallation.....................................................................................................................3–20
Figure 33 Login..............................................................................................................................................................................3–21

9243364 (Issue 1, Part 1)                                           Company Confidential                                                                                            Page 3–3
                                                          Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                                                                                 RH-70
Nokia Customer Care                                                                                                                           Phoenix service software

Figure 34 Add information for new user 1...........................................................................................................................3–21
Figure 35 Add information for new user 2...........................................................................................................................3–21
Figure 36 Login, user configured.............................................................................................................................................3–22
Figure 37 Phoenix icon...............................................................................................................................................................3–22
Figure 38 Manage connections................................................................................................................................................3–22
Figure 39 Connections list..........................................................................................................................................................3–23
Figure 40 Select mode: Manual................................................................................................................................................3–23
Figure 41 FLS virtual port icon..................................................................................................................................................3–23
Figure 42 Connections list..........................................................................................................................................................3–24
Figure 43 Connection information..........................................................................................................................................3–24
Figure 44 Scan product...............................................................................................................................................................3–24
Figure 45 Product support module information................................................................................................................3–25
Figure 46 Flash update welcome dialog...............................................................................................................................3–25
Figure 47 Uninstall flash update package.............................................................................................................................3–26
Figure 48 Flash installation interrupted................................................................................................................................3–26
Figure 49 Continue flash update..............................................................................................................................................3–26
Figure 50 Flash destination folder..........................................................................................................................................3–27
Figure 51 Flash installation status..........................................................................................................................................3–27
Figure 52 Finish flash update....................................................................................................................................................3–28
Figure 53 Phoenix icon...............................................................................................................................................................3–28
Figure 54 FPS-8 maintenance...................................................................................................................................................3–28
Figure 55 Prommer SW update................................................................................................................................................3–29
Figure 56 Prommer SW update done.....................................................................................................................................3–29
Figure 57 FPS-8 info window....................................................................................................................................................3–30
Figure 58 Flash directory window...........................................................................................................................................3–30
Figure 59 FPS-8 maintenance...................................................................................................................................................3–31
Figure 60 FPS-8 info window....................................................................................................................................................3–31
Figure 61 Box activation.............................................................................................................................................................3–32
Figure 62 Deactivation warning..............................................................................................................................................3–32
Figure 63 Extracting JBV-1 update files.................................................................................................................................3–33
Figure 64 JBV-1 update information.......................................................................................................................................3–34
Figure 65 JBV-1 update destination folder...........................................................................................................................3–34
Figure 66 Select installation: Full.............................................................................................................................................3–35
Figure 67 Select program folder..............................................................................................................................................3–35
Figure 68 Finish JBV-1 update installation...........................................................................................................................3–36
Figure 69 Checking JBV-1 SW version.....................................................................................................................................3–36
Figure 70 JBV-1 update directory window...........................................................................................................................3–37
Figure 71 JBV-1 SW update done.............................................................................................................................................3–37
Figure 72 JBV-1 SW status..........................................................................................................................................................3–37




Page 3–4                                                         Company Confidential                                                          9243364 (Issue 1, Part 1)
                                                       Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                     Nokia Customer Care


    Introduction

Read this first
The Phoenix software is used to a number of different phones containing different versions of baseband
generations.
These instructions are intended as a general guide and are not product specific, where a Phoenix SW version
is shown you should use the relevant version for your product and in the screen shots where a type designator
is shown you should read the type designator for your product.

    Service software installation

Phoenix installation steps in brief

Phoenix is the DCT-4 generation service software for reprogramming, testing and tuning the phone.
To install Phoenix, you need to:
•   Connect a DK2 Dongle or FLS-4S POS Flash Device
•   Install the Phoenix Service SW
•   Install the Data Package for Phoenix
•   Configure users
•   Manage connection settings (depends on the tools you are using)
Phoenix is now ready for FLS-4S Point Of Sales Flash Device use.
If you use FPS-8:
• Update FPS-8 SW
• Activate FPS-8
• Update JBV-1 Docking Station SW (only when needed)
Phoenix is now ready to be used with FPS-8 flash prommer and other tools as well.
The Phoenix Service Software installation contains:
• Service software support for all phone models included in the package
• Flash update package files for FPS-8* and FLS-4S programming devices
• All needed drivers for:
    • DK2 dongle
    • FLS-4S point of sales flash device
    • USB devices
          Note: Separate installation packages for flash update files and drivers are also available, but it is not
          necessary to use them unless updates appear between Phoenix Service SW releases. If separate update
          packages are used, they should be used after Phoenix and data packages have been installed.

Supported operating systems
• Windows 2000 and XP.

Hardware requirements for using Phoenix
• Minimum: Processor 300 MHz, RAM memory 64 MB, disk space 100 MB.
• Recommended for Windows 2000: Processor 700 MHz, RAM memory 256 MB, disk space 150 MB.




9243364 (Issue 1, Part 1)                    Company Confidential                                        Page 3–5
                                   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                   Phoenix service software


Installing Phoenix

Before you begin
• Check that a Dongle is attached to the parallel port of your computer.
• Download the installation package (for example, phoenix_service_sw_a15_2004_24_7_55.exe) to your
  computer (in C:\TEMP, for instance).
• Close all other programs.
• Run the application file (for example, phoenix_service_sw_a15_2004_24_7_55.exe) and follow the instructions
  on the screen.
         Note: Administrator rights may be required to be able to install Phoenix depending on the operating
         system.
If uninstalling or rebooting is needed at any point, you will be prompted by the Install Shield program.

Context
If at any point during installation you get this message, Dongle is not found and installation cannot continue:




                                          Figure 6 Dongle not found

Possible reasons may be a defective or too old PKD-1 Dongle (a new dongle has a six digit serial number).
Check the COM/parallel ports used first! After correcting the problem the installation can be restarted.
For more detailed information, please refer to Phoenix Help files. Each feature in Phoenix has its own Help
function, which can be activated while running the program. Press the F1 key or the Help button to activate a
Help file.




Page 3–6                                   Company Confidential                        9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                 Nokia Customer Care


Steps
1. Run the phoenix_service_sw_a15_2004_24_7_55.exe to start installation. Install Shield prepared the setup.




                                          Figure 7 Preparing setup

   Install Shield will prepare.
2. Click Next in Welcome dialog to continue.




                                          Figure 8 Welcome dialog



9243364 (Issue 1, Part 1)                 Company Confidential                                       Page 3–7
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                     RH-70
Nokia Customer Care                                                               Phoenix service software

3. Read the disclaimer carefully.




                                           Figure 9 Disclaimer text
4. Choose destination folder. The default folder C:\ProgramFiles\Nokia\Phoenix is recommended. Then click
   Next to continue. You may choose another location by selecting Browse (not recommended).




                                           Figure 10 Destination folder




Page 3–8                                      Company Confidential                 9243364 (Issue 1, Part 1)
                                    Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                              Nokia Customer Care

5. Wait for the components to be copied. The progress of the setup is shown in the Setup Status window.




                                          Figure 11 Installation status 1
6. Wait for the drivers to be installed and updated.
   The process may take several minutes to complete.
   If the operating system does not require rebooting (Windows 2000, XP) the PC components are registered
   right away.




                                         Figure 12 Installation status 2




9243364 (Issue 1, Part 1)                   Company Confidential                                  Page 3–9
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                            RH-70
Nokia Customer Care                                                                      Phoenix service software




                                     Figure 13 Registering components 1

  If the operating system requires restarting your computer (Windows 98, SE, ME) the Install Shield Wizard
  will tell you about it. Select Yes... to reboot the PC immediately and No... to reboot the PC manually afterwards.




                                          Figure 14 Restart computer

  After the reboot, components are registered and Phoenix is ready for use.
        Note: Phoenix does not work, if components have not been registered.




Page 3–10                                  Company Confidential                          9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                 Nokia Customer Care




                                       Figure 15 Registering components 2
7. Click Finish to end installation.




                                           Figure 16 Finish installation

    Phoenix is now ready for use.

Next action
Before using Phoenix Service Software, you must:
• install phone model specific data package for Phoenix, and
• configure users and connections.
FPS-8* can be used after updating its Flash Update Package files.

Phoenix update installation
If you already have the Phoenix Service SW installed on your computer, sooner or later there will be need to
update it when new versions are released.
Always use the latest available versions of both the Phoenix Service SW and the phone-specific Data Package.
Instructions can be found in phone model specific Technical Bulletins and Phone Data Package readme.txt files
(shown during installation).
To update the Phoenix Service Software you need to take exactly the same steps as when installing it for the
first time:
•   Download the installation package to your computer hard disk.
•   Close all other programs.
•   Run the application file (for example, phoenix_service_sw_a15_2004_24_7_55.exe).
•   New version of Phoenix will be installed.
•   Driver versions will be checked and updated.

9243364 (Issue 1, Part 1)                     Company Confidential                                 Page 3–11
                                    Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                Phoenix service software

When you update Phoenix from old to new version (for example, a14_2004_16_4_47 to a15_2004_24_7_55), the
update will take place automatically without uninstallation.
If you try to update the Phoenix Service Software with the same version that you already have (for example,
a15_2004_24_7_55 to a15_2004_24_7_55) you are asked if you want to uninstall the version of Phoenix you have
on your PC. In this case you can choose between total uninstallation and repair just like when you choose to
uninstall Phoenix service software from the Windows Control panel.
If you try to install an older version (for example, downgrade from a15_2004_24_7_55 to a14_2004_16_4_47),
installation will be interrupted.
Always follow the instructions on the screen.




                                      Figure 17 Installation interrupted

Uninstalling Phoenix

Context
Uninstallation can be done manually from Windows Control Panel → Add/Remove Programs .

Steps
1. Choose Phoenix Service Software → Add/Remove → Remove to uninstall Phoenix.




                                         Figure 18 Remove program

   The progress of the uninstallation is shown.


Page 3–12                                 Company Confidential                     9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                      Nokia Customer Care




                                       Figure 19 Uninstallation status
2. If the operating system does not require rebooting, click Finish to complete.
   Else, Install Shield Wizard will tell you about it. Select Yes... to reboot the PC immediately and No... to reboot
   the PC manually afterwards.




                                          Figure 20 Finish uninstallation




9243364 (Issue 1, Part 1)                   Company Confidential                                         Page 3–13
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                  Phoenix service software




                                         Figure 21 Restart computer

Repairing Phoenix installation

Context
If you experience any problems with the service software, or suspect that files have been lost, you can use the
repair function before completely reinstalling Phoenix.
         Note: The original installation package (for example, phoenix_service_sw_a15_2004_24_7_55.exe) must
         be found on your PC when you run the repair setup.

Steps
1. Open Windows Control Panel → Add/Remove Programs .
2. Select Phoenix Service Software → Add/Remove .
3. In the following view, choose Repair.
   Phoenix will now reinstall components and register them. The procedure is the same as in the update
   installation.




Page 3–14                                  Company Confidential                      9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                 Nokia Customer Care




                                           Figure 22 Repair program

4. Click Finish to complete repair.




                                      Figure 23 Finish repair installation

Phoenix service software data package overview

Each product has its own data package (DP). This contains all product-specific data files to make the Phoenix
Service Software and tools usable with a certain phone model:
•   Product software binary files
•   Files for type label printing
•   Validation file for the faultlog repair data reporting system
•   All product-specific configuration files for Phoenix Service Software components
Data files are stored under C:\Program Files\Nokia\Phoenix (default).




9243364 (Issue 1, Part 1)                   Company Confidential                                   Page 3–15
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                           RH-70
Nokia Customer Care                                                                     Phoenix service software


Installing Phoenix data package

Before you begin
1 Verify that The data package contains all product-specific data to make the Phoenix Service Software and
  tools usable with a certain phone model.
2 Check that the dongle is attached to the parallel port of your computer.
3 Install Phoenix Service SW.
4 Download the installation package (for example, RM-51_dp_EA_v_1_0.exe) to your computer (for example, in
  C:\TEMP).
5 Close all other programs.
6 Run the application file (for example, RM-51_dp_EA_ v_1_0.exe) and follow the instructions on the screen.
If you already have the Phoenix Service SW installed on your computer, you will need to update it when a new
version is released.
         Note: Very often the Phoenix Service SW and the phone-specific data package for Phoenix come in
         pairs, meaning that a certain version of Phoenix can only be used with a certain version of the data
         package. Always use the latest available versions of both. Instructions can be found in phone model
         specific Technical Bulletins and readme.txt files of the data packages.

Steps
1. To start installation, run the application file (for example, RM-51_dp_EA_ v_1_0.exe).
2. Click Next, and wait for the installation files to be extracted.




                                            Figure 24 Extracting files




Page 3–16                                   Company Confidential                        9243364 (Issue 1, Part 1)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                    Nokia Customer Care

3. Click Next to continue.




                                 Figure 25 Continue data package installation

   In this view you can see the contents of the data package. Read the text carefully. There should be information
   about the Phoenix version required with this data package.
   Click Next to continue.




                                  Figure 26 Data package setup information




9243364 (Issue 1, Part 1)                  Company Confidential                                        Page 3–17
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                  Phoenix service software

4. Confirm location and click Next to continue.




                                    Figure 27 Data package destination folder

   The install shield checks where the Phoenix application is installed and the directory is shown.
   Click Next to continue.
5. Click Next to start copying the files.
   Phone model specific files will be installed. Please wait.




                                            Figure 28 Start copying files




Page 3–18                                    Company Confidential                    9243364 (Issue 1, Part 1)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                 Nokia Customer Care




                                   Figure 29 Data package installation status
6. Click Finish to complete the installation.




                                  Figure 30 Finish data package installation

   You now have all phone model specific files installed in your Phoenix Service SW.

Next action
Phoenix can be used, for example, for flashing phones and printing type labels. But first you must:
• configure users, and
• manage connections.
FLS-4S can be used right away.
FPS-8* can be used after updating Flash Update Package files.


9243364 (Issue 1, Part 1)                  Company Confidential                                       Page 3–19
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                          RH-70
Nokia Customer Care                                                                    Phoenix service software


Uninstalling Phoenix data package

Context
If you try to install the same version of Phoenix data package that you already have, you are asked if you want
to uninstall the version you have on your PC. Older versions of data packages don´t need to be uninstalled unless
instructions to do so are given in the readme.txt file of the data package and bulletins concerning the release.
Please read all related documents carefully.

Steps
1. Click OK to uninstall, Cancel if you don’t want to uninstall.




                                 Figure 31 Uninstalling Phoenix data package
2. Once the previously installed data package is uninstalled, click Finish.




                                  Figure 32 Finish data package uninstallation

Alternative steps
• Uninstallation can also be done manually from Windows Control Panel → Add/Remove Programs →
  xx-xx (* Phone Data Package) . (*= type designator of the phone

Next action
Run the installation package again to continue installation from the beginning.




Page 3–20                                   Company Confidential                       9243364 (Issue 1, Part 1)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                  Nokia Customer Care


   Service software instructions

Configuring users in Phoenix

Steps
1. Start Phoenix Service SW and log in.
   If your user ID is already configured, choose it from the dropdown list and click OK. To add a new user or
   edit existing ones click Maintain.




                                            Figure 33 Login
2. Choose New to add information for a new user.




                                  Figure 34 Add information for new user 1
3. Type in your name and initials and click OK.




                                  Figure 35 Add information for new user 2

   A new user is now created.
4. Click OK.
   You are now able to login with this user name.


9243364 (Issue 1, Part 1)                  Company Confidential                                     Page 3–21
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                       RH-70
Nokia Customer Care                                                                 Phoenix service software

5. Click OK.




                                          Figure 36 Login, user configured

Managing connections in Phoenix

Steps
1. Start Phoenix Service SW and log in.




                                              Figure 37 Phoenix icon
2. Choose File → Manage Connections .




                                          Figure 38 Manage connections

   Existing connections can be selected, edited, deleted, and new ones created by using this dialog.




Page 3–22                                  Company Confidential                      9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                     Nokia Customer Care




                                         Figure 39 Connections list
3. Click Add to add a new connection, and select if you want to create it manually or by using the Connection
   Wizard.
   In the following dialogs you will be asked to select settings for the connection. If you use the Wizard, connect
   the tools and a phone to your PC and the wizard will automatically try to configure the correct connection.
4. Select Manual mode, and click Next to continue.




                                         Figure 40 Select mode: Manual

   i   For FLS-4S POS Flash Device, choose the following connection settings:
       • Media: FBUS
       • COM Port: Virtual COM Port used by FLS-4
         Note: ALWAYS check this. Go to Windows → Control Panel → FLS Virtual Port → Configuration .




                                         Figure 41 FLS virtual port icon



9243364 (Issue 1, Part 1)                   Company Confidential                                        Page 3–23
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                   Phoenix service software

   ii For FPS-8 Flash Prommer, choose the following connection settings:
       • Media: FPS-8
       • Port Num: COM Port where FPS-8 is connected
       • COMBOX_DEF_MEDIA: FBUS
5. Click Finish to complete the configuration.
6. Activate the connection you want to use by clicking it, use up/down arrows to move it on top of the list, and
   click Apply.




                                          Figure 42 Connections list

   The connection is now selected and can be used after closing the Manage Connections window.
   Selected connection will be shown on the right hand bottom corner of the screen.



                                     Figure 43 Connection information
7. To use the selected connection, connect the phone to Phoenix with correct service tools, make sure that it
   is switched on and select Scan Product.




                                            Figure 44 Scan product

   When a product is found, Phoenix will load product support. Name of the loaded product support module
   and its version information will be shown on the bottom of the screen.




Page 3–24                                  Company Confidential                       9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                   Nokia Customer Care



                                Figure 45 Product support module information

Installing Flash support files for FPS-8* and FLS-4*

Before you begin
         Note: This is a separate installation package.
• Install Phoenix Service SW.
• Install phone model specific data package for Phoenix.
• The flash support files are delivered in the same installation package with Phoenix data packages or newer
  Phoenix packages since September 2003.
• Normally it is enough to install Phoenix and the phone-specific data package because the Phoenix installation
  always includes the latest flash update package files for FLS-4S/FPS-8*.
• A separate installation package for flash support files is available, and the files can be updated according to
  this instruction if updates appear between Phoenix/data package releases.

Context
If you are not using a separate installation package, you can skip this section and continue with FPS-8 Flash
prommer SW update (Page 3–28) after installing a new phone data package.

Steps
1. Start by double clicking flash_update_03_13_001.exe to begin installation.




                                    Figure 46 Flash update welcome dialog




9243364 (Issue 1, Part 1)                  Company Confidential                                       Page 3–25
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                          RH-70
Nokia Customer Care                                                                    Phoenix service software

2. If the same version of Flash Update package already exists, and you want to reinstall it, the previous package
   is first uninstalled. Run the installation again.




                                   Figure 47 Uninstall flash update package

   If you try to downgrade the existing version to older ones, the setup will be aborted. If you really want to
   downgrade, uninstall newer files manually from Control Panel and then rerun the installation again.




                                    Figure 48 Flash installation interrupted

   If an older version exists on your PC and it needs to be updated, click Next to continue installation.




                                        Figure 49 Continue flash update




Page 3–26                                  Company Confidential                        9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                   Nokia Customer Care

3. It is highly recommended to install the files to the default destination folder C:\Program Files\Nokia
   \Phoenix. Click Next to continue.




                                       Figure 50 Flash destination folder

   When installing the flash update files for the first time you may choose another location by selecting
   Browse. However, this is not recommended.
   Installation will continue.




                                       Figure 51 Flash installation status




9243364 (Issue 1, Part 1)                  Company Confidential                                      Page 3–27
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                Phoenix service software

4. Choose Finish to complete the installation procedure.




                                         Figure 52 Finish flash update

Next action
FLS-4 can be used right after the Flash Update Package is installed.
FPS-8* flash prommer must be updated using Phoenix!

Updating FPS-8 Flash prommer software

Steps
1. Start Phoenix Service Software and log in, manage connection correctly for the FPS-8* flash prommer.




                                            Figure 53 Phoenix icon
2. Choose Flashing → FPS-8 Maintenance .




                                         Figure 54 FPS-8 maintenance

         Note: Screen shots may be different depending on the Phoenix version used and the connected
         components.


Page 3–28                                  Company Confidential                     9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                 Nokia Customer Care

3. When the new FPS-8 flash update package is installed to computer you will be asked to update the files to
   your FPS-8 Prommer. Select Yes to update files.




                                        Figure 55 Prommer SW update
4. Wait until you are notified that update has been successful; the procedure will take a couple of minutes.
   Click OK to close the FPS-8 Maintenance window.




                                    Figure 56 Prommer SW update done

   View after successful prommer software update:




9243364 (Issue 1, Part 1)                 Company Confidential                                     Page 3–29
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                   Phoenix service software




                                         Figure 57 FPS-8 info window

Alternative steps
• FPS-8 SW can also be updated by pressing Update button and selecting appropriate fps8upd.ini file in C:
  \Program Files\Nokia\Phoenix\Flash.




                                       Figure 58 Flash directory window
• All files can be loaded separately to FPS-8. To do this, just press the right mouse button in the Flash box
  files window and select the file type to be loaded.
   More information can be found in Phoenix Help.

Activating FPS-8

Context
Before FPS-8 can be successfully used for phone programming, it must first be activated. Fill in first the FPS-8
activation request sheet in the FPS-8 sales package and follow the instructions on the sheet (included in sales
package CD-ROM or from partner web site).


Page 3–30                                  Company Confidential                        9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                    Nokia Customer Care

When activation file is received (for example, 00000.in), copy it to C:\ProgramFiles\Nokia\Phoenix
\BoxActivation directory on your computer (this directory is created when Phoenix is installed).

Steps
1. Start Phoenix Service Software.
2. Select Flashing → FPS-8 maintenance .




                                         Figure 59 FPS-8 maintenance
3. Click Activate in the FPS-8 Maintenance window.




                                         Figure 60 FPS-8 info window

   If you saved the activation file to some other directory on your PC, Browse to find it




9243364 (Issue 1, Part 1)                  Company Confidential                                      Page 3–31
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                            RH-70
Nokia Customer Care                                                                      Phoenix service software

4. Click Open to activate the box.




                                          Figure 61 Box activation
5. Turn the FPS-8's power off and on to complete activation.

Deactivating FPS-8

Context
If there is, for example, a need to send the FPS-8 box for repair, it must be deactivated first.

Steps
1.   Start Phoenix Service Software.
2.   Choose Maintenance → Prommer Maintenance .
3.   In the Prommer Maintenance window, click Deactivate.
4.   To confirm the deactivation, click Yes.




                                         Figure 62 Deactivation warning

   The box is deactivated.
5. To complete the deactivation, restart FPS-8.




Page 3–32                                   Company Confidential                         9243364 (Issue 1, Part 1)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                    Nokia Customer Care


Updating JBV-1 docking station software

Before you begin
The JBV-1 docking station contains software (firmware) which can be updated. You need the following
equipment to update the software:
•    PC with USB connection
•    operating system supporting USB (Not Win 95 or NT)
•    USB Cable (can be purchased from shops or suppliers providing PC hardware and accessories)
•    JBV-1 docking station
•    external power supply (11-16V)
Before installation:
• Download Jbv1_18_update.zip file to your computer (in C:\TEMP for example) from your download web site.
• Close all other programs.
• Follow instructions on the screen.

Context
The JBV-1 docking station is a common tool for all DCT-4 generation products. In order to make the JBV-1 usable
with different phone models, a phone-specific docking station adapter is used.

Steps
1.    Run Jbv1_18_update.zip file and start software installation by double clicking Setup.exe.
           Note: DO NOT CONNECT THE USB CABLE/JBV-1 TO YOUR COMPUTER YET!




                                     Figure 63 Extracting JBV-1 update files

      Files needed for JBV-1 package setup program will be extracted.




9243364 (Issue 1, Part 1)                   Company Confidential                                     Page 3–33
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                  Phoenix service software

2.   Read the instructions in the dialog box and click Next to continue.




                                    Figure 64 JBV-1 update information
3.   Accept the suggested destination folder for installing the JBV-1 SW Package, and click Next to continue.




                                     Figure 65 JBV-1 update destination folder
4.   Select Full installation and click Next to continue.




Page 3–34                                  Company Confidential                      9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                    Nokia Customer Care




                                       Figure 66 Select installation: Full
5.   A program folder is created and the software files are installed there. Click Next to continue.




                                        Figure 67 Select program folder




9243364 (Issue 1, Part 1)                  Company Confidential                                        Page 3–35
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                   Phoenix service software

6.   Click Finish to complete the installation.




                                   Figure 68 Finish JBV-1 update installation
7.   Connect the USB cable/JBV-1 to your computer. Connect power to JBV-1 (11-16V DC) from an external power
     supply, then connect the USB Cable between the JBV-1 USB connector and the PC.
8.   Install or update the JBV-1 USB drivers which are delivered with the JBV-1 SW installation package.
     The drivers can be found in C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver
     • If there is no previously installed JBV-1 Firmware update package installed on your computer, Windows
       will detect connected USB cable and detect drivers for new HW. You will be prompted about this, please
       follow the instructions and allow Windows to search and install the best drivers available.
     • If there is a previously installed JBV-1 Firmware update package (v.17 or older) on your computer, please
       update the JBV-1 USB driver. Please see the readme.txt file in C:\Program Files\Nokia\JBV-1 Firmware
       Update\JBV-1USB driver folder for instructions on how to update the JBV-1 USB Driver.
     After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update can begin.
9.   Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update and start JBV-1 Update
     SW by double clicking fwup.exe.
    JBV-1 Firmware update starts and shows current status of the connected JBV-1. If firmware version read
    from your JBV-1 is not the latest one available (v.17 or older), it needs to be updated to version 18 by
    clicking Update Firmware.
10. Choose Refresh Status to check the SW version.




                                      Figure 69 Checking JBV-1 SW version


Page 3–36                                   Company Confidential                      9243364 (Issue 1, Part 1)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Phoenix service software                                                                    Nokia Customer Care

11. Choose file JBV1v18.CDE and click Open to update your JBV-1 to a new version (v.18).




                                   Figure 70 JBV-1 update directory window

    Wait until you hear a "click" from the JBV-1.
    The older SW file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW package has been installed
    on your computer.
12. Click OK to see the current JBV-1 status (after a successful update).




                                        Figure 71 JBV-1 SW update done




                                           Figure 72 JBV-1 SW status

    You have now updated the software of your JBV-1 docking station and it is ready for use.

Next action
If you have several docking stations you need to update, disconnect the power and USB cables from the previous
one and connect them to the next docking station. First, click Refresh Status to see the current SW version and
then Update Firmware to update the software.
After you have updated all docking stations, close the JBV-1 Firmware Update dialog box.




9243364 (Issue 1, Part 1)                   Company Confidential                                       Page 3–37
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Phoenix service software




                          (This page left intentionally blank.)




Page 3–38                       Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




                       4 — Service Tools




9243364 (Issue 1, Part 1)             Company Confidential                Page 4–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                             Service Tools




                          (This page left intentionally blank.)




Page 4–2                        Company Confidential                9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                                                                                                      Nokia Customer Care


                                                                                 Table of Contents
Service tools......................................................................................................................................................................................4–5
   ACF-8..............................................................................................................................................................................................4–5
   AXS-4.............................................................................................................................................................................................4–5
   CA-10DS.........................................................................................................................................................................................4–5
   CA-28DS....................................................................................................................................................................................4–0
   CA-31D...........................................................................................................................................................................................4–6
   CA-35S......................................................................................................................................................................................4–0
   CA-41PS....................................................................................................................................................................................4–0
   CA-5S..............................................................................................................................................................................................4–6
   CA-65DS....................................................................................................................................................................................4–0
   CA-66DS....................................................................................................................................................................................4–0
   CA-67DS....................................................................................................................................................................................4–0
   DA-49........................................................................................................................................................................................4–0
   DAU-9S......................................................................................................................................................................................4–0
   FLC-2..............................................................................................................................................................................................4–8
   FLS-4S............................................................................................................................................................................................4–8
   FPS-10.......................................................................................................................................................................................4–0
   FPS-11...........................................................................................................................................................................................4–9
   FPS-8..............................................................................................................................................................................................4–9
   JBV-1.........................................................................................................................................................................................4–0
   MJ-59.........................................................................................................................................................................................4–0
   PCS-1.........................................................................................................................................................................................4–0
   PKD-1........................................................................................................................................................................................4–0
   RJ-51 PA...................................................................................................................................................................................4–0
   RJ-72.........................................................................................................................................................................................4–0
   RJ-79.........................................................................................................................................................................................4–0
   SA-41........................................................................................................................................................................................4–0
   SF-10.........................................................................................................................................................................................4–0
   SPS-1...........................................................................................................................................................................................4–11
   SRT-6.........................................................................................................................................................................................4–0
   SS-54.........................................................................................................................................................................................4–0
   ST-30.........................................................................................................................................................................................4–0
   ST-32.........................................................................................................................................................................................4–0
   SX-4...........................................................................................................................................................................................4–0
   XCS-4...........................................................................................................................................................................................4–13
   XRF-1.........................................................................................................................................................................................4–0
Service software concept...........................................................................................................................................................4–14
   POS (Point of Sales) flash concept.....................................................................................................................................4–14
   FPS-8 Prommer box flash concept.....................................................................................................................................4–15
   FLS-10 Prommer box flash concept...................................................................................................................................4–16
   FLS-11 Prommer box flash concept...................................................................................................................................4–17
   JBV-1 flash concept with FPS-10.........................................................................................................................................4–18
   JBV-1 flash concept with FPS-8...........................................................................................................................................4–19
   Module jig (MJ-59) service concept...................................................................................................................................4–20


List of Figures
Figure 73 POS flash concept......................................................................................................................................................4–14
Figure 74 FPS-8 Prommer box flash concept.......................................................................................................................4–15
Figure 75 FPS-10 Prommer box flash concept.....................................................................................................................4–16

9243364 (Issue 1, Part 1)                                             Company Confidential                                                                                              Page 4–3
                                                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                                                                               RH-70
Nokia Customer Care                                                                                                                                     Service Tools

Figure 76 FPS-11 Prommer box flash concept.....................................................................................................................4–16
Figure 77 JBV-1 flash concept with FPS-10...........................................................................................................................4–16
Figure 78 JBV-1 flash concept with FPS-8..............................................................................................................................4–16
Figure 79 Module jig service concept.....................................................................................................................................4–20




Page 4–4                                                     Company Confidential                                                    9243364 (Issue 1, Part 1)
                                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                                Nokia Customer Care


   Service tools

List of Service Tools
The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product , refer to various concepts.

                                      ACF-8                    Universal power
                                                               supply
                                      ACF-8 universal power supply is used to power FPS-8. ACF-8 has 6V DC
                                      and 2.1A output.




                                      AXS-4                    Service cable
                                      The AXS-4 D9-D9 service cable is used to connect two 9 pin D connectors
                                      for example between PC and FPS-8.
                                      The cable length is 2 meters.




                                      CA-10DS                  Bi-directional Parallel
                                                               Cable
                                      Bi-Directional parallel cable included in FPS-8 sales pack.




                                      CA-28DS                  Service data cable
                                      The CA-28DS service cable is used to connect FLS-4S to the POS flash
                                      adapter for supplying a controlled operating voltage and data
                                      connection.
                                                Note: Old XCS-1 cable can be used as well.




9243364 (Issue 1, Part 1)                  Company Confidential                                        Page 4–5
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                              RH-70
Nokia Customer Care                                                                    Service Tools

                          CA-31D                   USB cable
                          The CA-31D USB cable is used to connect FPS-10 or FPS-11 to a PC. It is
                          included in the FPS-10 and FPS-11 sales packages.




                          CA-35S                   Power cable
                          Power cable for connecting e.g. the FPS-10 prommer box to the POS flash
                          adapter.




                          CA-41PS                  Power cable
                          Power cable for connection of e.g. the JBV-1 docking station to the FPS-
                          10 prommer box.




                          CA-5S                    DC cable
                          The DC cable CA-5S is used to connect JBV-1 to the phone charger jack
                          for ADC/VCHAR/ICHAR calibration
                                    Note: Old SCB-3 can be used as well.




Page 4–6                        Company Confidential                       9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                       Nokia Customer Care

                                CA-65DS                  DS easy flash cable
                                The CA-65 DS easy flash cable is used to connect the phone bottom
                                connector to either POS flashing device (FLS-4S) or to the PROMMER box
                                (FPS-11).

                                CA-66DS                  Easy flash cable
                                This cable connects the phone DC port to the FPS-8 prommer.




                                CA-67DS                  Easy flash cable
                                This cable connects the phone DC port to the FPS-10 prommer.




                                DA-49                    Docking station
                                                         adapter
                                The Docking Station adaptor is used for this phone in combination with
                                JBV-1. The adapter supports flashing and energy management
                                calibration.
                                Features include:
                                •   compatible with the JBV-1
                                •   easy phone attachment and detachment.
                                •   reliable phone locking
                                •   switch for detecting phone
                                •   replaceable SIM interface
                                DAU-9S                   MBUS cable
                                The MBUS cable DAU-9S has a modular connector and is used, for
                                example, between the PC's serial port and module jigs, flash adapters or
                                docking station adapters.
                                          Note: Docking station adapters valid for DCT4 products.




9243364 (Issue 1, Part 1)             Company Confidential                                     Page 4–7
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                             RH-70
Nokia Customer Care                                                                   Service Tools

                          FLC-2                     DC cable
                          FLC-2 is used with a flash adapter to supply a controlled operating
                          voltage.




                          FLS-4S                    Flash device
                          FLS-4S is a dongle and flash device incorporated into one package,
                          developed specifically for POS use.




                          FPS-10                    Flash prommer
                          FPS-10 interfaces with:
                          •   PC
                          •   Control unit
                          •   Flash adapter
                          •   Smart card
                          FPS-10 flash prommer features:
                          •   Flash functionality for BB5 and DCT-4 terminals
                          •   Smart Card reader for SX-2 or SX-4
                          •   USB traffic forwarding
                          •   USB to FBUS/Flashbus conversion
                          •   LAN to FBUS/Flashbus and USB conversion
                          •   Vusb output switchable by PC command
                          FPS-10 sales package includes:
                          • FPS-10 prommer
                          • Power Supply with 5 country specific cords
                          • USB cable




Page 4–8                        Company Confidential                      9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                          Nokia Customer Care

                                FPS-11                     Parallel flash
                                                           prommer
                                FPS-11 interfaces with:
                                •   PC
                                •   Control unit
                                •   Flash adapter
                                •   Smart card
                                FPS-11 flash prommer features:
                                •   Can flash up to 8 phones at a time, controlled by one PC
                                •   Communication method between PC and FPS-11 is single USB2.0
                                •   No need for external power for powering up phones
                                •   Smart Card reader for SX-2 and SX-4
                                •   Updates software
                                •   Future feature: will support all DCT-4 protocols and models
                                FPS-11 sales package includes:
                                •   FPS-11
                                •   Power Supply for FPS-11
                                •   EUR, UK, USA Power cords
                                •   USB2.0 cable
                                FPS-8                      FLASH prommer
                                The flash prommer FPS-8 is used for example with flash adapters,
                                docking station adapters and flash/docking stations. Power is supplied
                                to FPS-8 from the universal power supply, ACF-8.
                                The sales pack includes:
                                •   FPS-8 flash prommer
                                •   FPS-8 activation sheet
                                •   ACF-8 universal power supply
                                •   AXS-4 service cable (D9-D9)
                                •   Printer cable
                                JBV-1                      Docking station
                                The JBV-1 docking station is a general tool that has been designed for
                                calibration and software update use. The JBV-1 is used together with a
                                docking station adapter as one unit
                                In calibration mode the JBV-1 is powered by an external power supply:
                                11-16V DC. When flashing the power for the phone must be taken from
                                the flash prommer.
                                          Note: JBV-1 main electrical functions are:
                                          • adjustable VBATT calibration voltage, current measurement
                                            limit voltage: VCHAR, current measurement: ICHAR
                                          • adjustable ADC calibration voltage via BTEM and the BSI
                                            signal
                                          • BTEMP and BSI calibration resistor
                                          • signal from FBUS to the phone via the parallel jig
                                          • control via FBUS or USB
                                          • Flash OK/FAIL indication

9243364 (Issue 1, Part 1)             Company Confidential                                       Page 4–9
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                              RH-70
Nokia Customer Care                                                                    Service Tools

                          MJ-59                    Module jig
                          MJ-59 is meant for component level troubleshooting.
                          The jig includes an RF interface for GSM.




                          PCS-1                    Power cable
                          The PCS-1 power cable (DC) is used with a docking station, a module jig
                          or a control unit to supply a controlled operating voltage.




                          PKD-1                    SW security device
                          SW security device is a piece of hardware enabling the use of the service
                          software when connected to the parallel (LPT) port of the PC.
                          Without the device, it is not possible to use the service software.
                          Printer or any such device can be connected to the PC through the device
                          if needed.


                          RJ-51 PA                 Rework jig
                          To be used with ST-30!




                          RJ-72                    Rework jig
                          To be used with rework stencil ST-32.




Page 4–10                       Company Confidential                       9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                          Nokia Customer Care

                                RJ-79                     Soldering jig
                                The soldering jig RJ-79 is used for soldering and as a rework jig for system
                                module. It is made of lead-free rework compatible material.




                                SA-41                     RF Coupler
                                SA-41 RF Coupler is used for Go/No-Go test after changing components
                                in the RF part of the phone.
                                The SA-41 is mounted on the docking station adapter.
                                         Note: For RF attenuation values, please refer to the Service
                                         bulletin.


                                SF-10                     POS flash adapter
                                The POS flash adapter SF-10 allows FBUS/MBUS connections for flashing.




                                SPS-1                     Soldering Paste
                                                          Spreader




9243364 (Issue 1, Part 1)             Company Confidential                                        Page 4–11
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                               RH-70
Nokia Customer Care                                                                     Service Tools

                          SRT-6                    Opening tool




                          SS-54                    Alignment Jig
                          Alignment jig is used to efficiently assemble the dome-sheet to the
                          pone's PWB. The jig is made of EDS proof material.




                          ST-30                    Rework stencil
                          Rework stencil to be used together with RJ-51 to rework the Front End
                          Module (FEM)




                          ST-32                    Rework stencil for
                                                   N7600
                          Rework stencil to be used together with RJ-72 for rework of N7600.




                          SX-4                     Smart card
                          SX-4 is a BB5 security device used to protect critical features in tuning
                          and testing.
                          SX-4 is also needed together with FPS-10 when DCT-4 phones are flashed.




Page 4–12                       Company Confidential                       9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                       Nokia Customer Care

                                XCS-4                   Modular cable
                                XCS-4 is a shielded (one specially shielded conductor) modular cable for
                                flashing and service purposes.




                                XRF-1                   RF cable
                                The RF cable is used to connect, for example, a module repair jig to the
                                RF measurement equipment.
                                SMA to N-Connector ca. 610mm.
                                Attenuation for:
                                • GSM850/900: 0.3+-0.1 dB
                                • GSM1800/1900: 0.5+-0.1 dB
                                • WLAN: 0.6+-0.1dB




9243364 (Issue 1, Part 1)             Company Confidential                                    Page 4–13
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                            Service Tools


     Service software concept

POS (Point of Sales) flash concept




                                           Figure 73 POS flash concept

Item               Description                                                       Type
 1                    Phone
 2                    Battery
 3                    Easy flash cable                                                CA-65DS
 4                    FLS-4S sales pack                                               FLS-4S
 5                    AC charger                                                      ACF-8
 6                    PC with Service SW CD-ROM




Page 4–14                                    Company Confidential                9243364 (Issue 1, Part 1)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                   Nokia Customer Care


FPS-8 Prommer box flash concept




                                 Figure 74 FPS-8 Prommer box flash concept

Item                  Description                                               Type
 1                     Phone
 2                     Battery
 3                     Service cable                                            CA-66DS
 4                     Flash prommer box sales pack including 2 pcs SF12 SRAM   FPS-8
 5                     AC Charger, included in FPS-8 sales package              ACF-8
 6                     RS-232 (D9 – D9) cable, included in FPS-8 sales pack     AXS-4
 7                     Printer cable, included in FPS-8 sales package
 8                     Software protection key                                  PKD-1
 9                     PC with service SW




9243364 (Issue 1, Part 1)                  Company Confidential                           Page 4–15
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                 RH-70
Nokia Customer Care                                                                       Service Tools


FLS-10 Prommer box flash concept




                                Figure 75 FPS-10 Prommer box flash concept

Item              Description                                                 Type
 1                Battery
 2                Phone
 3                Service cable                                                CA-67DS
 4                Flash prommer box sales pack                                 FPS-10
 5                Power supply, included in FPS-10 sales package               AFC-8
 6                USB A to B cable                                             CA-31D
 7                Software protection key                                      PKD-1
 8                Service SW (PHOENIX)




Page 4–16                                 Company Confidential                9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                    Nokia Customer Care


FLS-11 Prommer box flash concept




                                 Figure 76 FPS-11 Prommer box flash concept

Item               Description                                                 Type
 1                  Phone
 2                  Battery                                                    BL-5C
 3                  DC power cable                                             CA-65DS
 4                  Flash prommer box sales pack                               FPS-11
 5                  Power supply, included in FPS-11 sales package
 6                  USB A to B cable                                           CA-31D
 7                  Software protection key                                    PKD-1
 8                  Service SW (PHOENIX)




9243364 (Issue 1, Part 1)                  Company Confidential                           Page 4–17
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                 RH-70
Nokia Customer Care                                                                       Service Tools


JBV-1 flash concept with FPS-10




                                 Figure 77 JBV-1 flash concept with FPS-10

Item              Description                                                 Type
 1                Docking station                                              JBV-1
 2                Docking station adapter                                      DA-49
 3                DC power cable                                               CA-41PS
 4                Modular cable                                                XCS-4
 5                Flash prommer box sales pack                                 FPS-10
 6                Power supply, included in FPS-10 sales package               AFC-8
 7                USB A to B cable                                             CA-31D
 8                Software protection key                                      PKD-1
 9                Service SW (PHOENIX)




Page 4–18                                 Company Confidential                9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Service Tools                                                                    Nokia Customer Care


JBV-1 flash concept with FPS-8




                                    Figure 78 JBV-1 flash concept with FPS-8

Item               Description                                                 Type
 1                  Docking station                                            JBV-1
 2                  Docking station adapter                                    DA-49
 3                  DC power cable                                             PCS-1
 4                  Modular cable                                              XCS-4
 5                  Flash prommer box sales pack                               FPS-8
 6                  Power supply, included in FPS-8 sales package              AFC-8
 7                  RS-232 (D9 – D9) cable, included in FPS-8 sales package    AXS-4
 8                  Printer cable, included in FPS-8 sales package
 9                  Software protection key                                    PKD-1
 10                 Service SW (PHOENIX)




9243364 (Issue 1, Part 1)                  Company Confidential                           Page 4–19
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                 RH-70
Nokia Customer Care                                                                       Service Tools


Module jig (MJ-59) service concept




                                   Figure 79 Module jig service concept

Item          Description                                                     Type
 1             Module jig                                                     MJ-59
 2             RF test cable                                                  XCF-4
 3             Service MBUS/FBUS cable                                        DAU-9S
 4             DC power cable                                                 PCS-1
 5             Software protection key                                        PKD-1
 6             PC with Service SW (PHOENIX)




Page 4–20                                 Company Confidential                9243364 (Issue 1, Part 1)
                                Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




             5 — Disassembly and
            reassembly instructions




9243364 (Issue 1, Part 1)             Company Confidential                Page 5–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                            RH-70
Nokia Customer Care                                        Disassembly and reassembly instructions




                          (This page left intentionally blank.)




Page 5–2                        Company Confidential                      9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Disassembly and reassembly instructions                                                                                                               Nokia Customer Care


                                                                           Table of Contents
Disassembly instructions..............................................................................................................................................................5–5
Reassembly instructions...............................................................................................................................................................5–9




9243364 (Issue 1, Part 1)                                        Company Confidential                                                                                    Page 5–3
                                                       Copyright ©2005 Nokia. All Rights Reserved.
                                                                                            RH-70
Nokia Customer Care                                        Disassembly and reassembly instructions




                          (This page left intentionally blank.)




Page 5–4                        Company Confidential                      9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Disassembly and reassembly instructions                                         Nokia Customer Care


     Disassembly instructions

Steps
1.    Tools needed for disassembly and reassembly.




2.    Protect the window with a film.




3.    Press the release button and remove the B-cover.




4.    Use the STR-6 to unlock the A-cover on both sides.




9243364 (Issue 1, Part 1)                   Company Confidential                          Page 5–5
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                    Disassembly and reassembly instructions

5.   Remove the A-cover. When reassembling the A-cover, always start on the top side of the device.




6.   Use the SRT-6 to remove the keymat and protect the inner side of the window with a film.




7.       Note: For reassembly only!
     Fit the keymat to the A-cover, paying attention to its correct position.




8.   Unscrew the six Torx Plus size 6 screws in the shown order. For reassembly, use the reverse order and a
     Torx Plus size 6 driver with a torque setting of 24 Ncm.
         Note: For reassembly, ALWAYS USE NEW SCREWS!




Page 5–6                                    Company Confidential                      9243364 (Issue 1, Part 1)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Disassembly and reassembly instructions                                                      Nokia Customer Care

9.   Lift the LCD shielding while carefully pressing on the LCD module with a clean cloth.




10. Remove the LCD shielding.




11. Remove the acoustic channel.




12. Protect the LCD module with a film.




9243364 (Issue 1, Part 1)                  Company Confidential                                        Page 5–7
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                  Disassembly and reassembly instructions

13. Take care of the surrounding components when opening the LCD connector.




14. Use the SRT-6 to open the LCD connector in the shown order. Be extra careful with the flex foil of the LCD
    module.




15. Remove the LCD module.




16. Remove the light guide assembly.




Page 5–8                                   Company Confidential                      9243364 (Issue 1, Part 1)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Disassembly and reassembly instructions                                                Nokia Customer Care

17. Lift the engine module a bit with the SRT-6 and remove it from the D-cover assembly.




18. The antenna IHF assembly drops out when turning the D-cover assembly.




19. Press out the Easy Flash connector by using the DC-plug.




20. Remove the microphone with the slotted screwdriver.




   Reassembly instructions
For reassembly, follow the instructions for disassembly, but in reversed order.
         Note: Pay extra attention to steps 8,7 and 5.


9243364 (Issue 1, Part 1)                  Company Confidential                                  Page 5–9
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                            RH-70
Nokia Customer Care                                        Disassembly and reassembly instructions




                          (This page left intentionally blank.)




Page 5–10                       Company Confidential                      9243364 (Issue 1, Part 1)
                      Copyright ©2005 Nokia. All Rights Reserved.
   Nokia Customer Care




Service Manual

    RH-70 (Nokia 1110)
 Mobile Terminal
Part No: (9243364 (Issue 1, Part 2))




       Company Confidential




   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care




                          (This page left intentionally blank.)




Page ii                         Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Nokia 1110 Service Manual Structure                                          Nokia Customer Care


Nokia 1110 Service Manual Structure
1 Baseband troubleshooting
2 RF troubleshooting




9243364 (Issue 1, Part 2)                Company Confidential                            Page iii
                               Copyright ©2005 Nokia. All Rights Reserved.
                                                                                               RH-70
Nokia Customer Care                                               Nokia 1110 Service Manual Structure




                          (This page left intentionally blank.)




Page iv                         Company Confidential                         9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
                             Nokia Customer Care




                             1 — Baseband
                            troubleshooting




9243364 (Issue 1, Part 2)              Company Confidential                Page 1–1
                             Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Baseband troubleshooting




                          (This page left intentionally blank.)




Page 1–2                        Company Confidential                 9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                                                                                      Nokia Customer Care


                                                                               Table of Contents
General baseband troubleshooting..........................................................................................................................................1–5
   Phone is dead.............................................................................................................................................................................1–5
   Flash programming do not work.........................................................................................................................................1–6
   Easy flash programming does not work............................................................................................................................1–8
   Power does not stay on or the phone is jammed...........................................................................................................1–9
   Display shows "Contact Service"........................................................................................................................................1–10
   The phone does not register to the networks, or the phone can not make a call............................................1–11
SIM related faults..........................................................................................................................................................................1–12
   Insert SIM card fault...............................................................................................................................................................1–12
   SIM card rejected.....................................................................................................................................................................1–13
User interface.................................................................................................................................................................................1–14
   Blank display............................................................................................................................................................................1–14
   Display is corrupt....................................................................................................................................................................1–14
   Dead keys..................................................................................................................................................................................1–15
   No backlight for display or keys.........................................................................................................................................1–15
Audio troubleshooting................................................................................................................................................................1–17
   Audio troubleshooting using phoenix.............................................................................................................................1–17
   Check microphone using "Hp microphone in Ext speaker out" loop.....................................................................1–18
   Check earpiece using "Ext microphone in Hp speaker out" loop.............................................................................1–19
   Check IHF & ringing tone function using "Buzzer".......................................................................................................1–19
   Check vibra function using "Vibra control".....................................................................................................................1–20
   Earpiece fault...........................................................................................................................................................................1–21
   IHF/ringing tone fault............................................................................................................................................................1–22
   Headset earpiece fault..........................................................................................................................................................1–23
   Microphone fault.....................................................................................................................................................................1–24
   Headset microphone fault...................................................................................................................................................1–25


List of Figures
Figure 1 Phone is dead troubleshooting.................................................................................................................................1–6
Figure 2 Flash programming fault.............................................................................................................................................1–7
Figure 3 Easy flash programming fault....................................................................................................................................1–9
Figure 4 Power does not stay on or the phone is jammed.............................................................................................1–10
Figure 5 Troubleshooting when the "Contact Service" message is seen....................................................................1–11
Figure 6 No registering or call..................................................................................................................................................1–12
Figure 7 Insert SIM card fault....................................................................................................................................................1–13
Figure 8 Signal diagram.............................................................................................................................................................1–13
Figure 9 Signal diagram.............................................................................................................................................................1–14
Figure 10 Blank display...............................................................................................................................................................1–14
Figure 11 Display is corrupt.......................................................................................................................................................1–15
Figure 12 Dead keys.....................................................................................................................................................................1–15
Figure 13 No backlight for display or keys...........................................................................................................................1–16
Figure 14 Phoenix audio test window...................................................................................................................................1–17
Figure 15 PWB audio test points.............................................................................................................................................1–18
Figure 16 Test arrangement for microphone......................................................................................................................1–19
Figure 17 Test arrangement for earpiece.............................................................................................................................1–19
Figure 18 Checking IHF and ring tone by using "Buzzer".................................................................................................1–20
Figure 19 Checking vibra function by using vibra control...............................................................................................1–20
Figure 20 Earpiece fault flow chart.........................................................................................................................................1–21
Figure 21 IHF/ringing tone fault flow chart.........................................................................................................................1–22

9243364 (Issue 1, Part 2)                                           Company Confidential                                                                                          Page 1–3
                                                          Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                                                                    RH-70
Nokia Customer Care                                                                                                              Baseband troubleshooting

Figure 22 Headset earpiece fault flow chart........................................................................................................................1–23
Figure 23 Microphone fault flow chart..................................................................................................................................1–24
Figure 24 Headset microphone fault flow chart.................................................................................................................1–25




Page 1–4                                                     Company Confidential                                                   9243364 (Issue 1, Part 2)
                                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                     Nokia Customer Care


   General baseband troubleshooting

Phone is dead

Context
This means that the phone does not use any current at all when the supply is connected and/or power key is
pressed. It is assumed that the voltage supplied is 3.6VDC. The UEMCLite will prevent any functionality at battery/
supply levels below 2.9VDC.




9243364 (Issue 1, Part 2)                   Company Confidential                                         Page 1–5
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                RH-70
Nokia Customer Care                                                          Baseband troubleshooting


Context




                                 Figure 1 Phone is dead troubleshooting

Flash programming do not work
The flash programming can be done via the pads on the PWB (J2060).




Page 1–6                                 Company Confidential                 9243364 (Issue 1, Part 2)
                               Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                       Nokia Customer Care

In case of Flash failure in FLALI station, swap the phone and send it back to the care program for further analysis.
Possible failures could be short-circuit of balls under µBGAs (UEMCLite, UPP4M, FLASH). Missing or misaligned
components. In flash programming error cases the flash prommer can give some information about a fault. The
fault information messages could be:
Phone doesn't set FBUS_TX line low
Because of the use of uBGA components it is not possible to verify if there is a short circuit in control- and address
lines of MCU (UPP4M) and memory (flash).




                                        Figure 2 Flash programming fault


9243364 (Issue 1, Part 2)                    Company Confidential                                           Page 1–7
                                   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                            RH-70
Nokia Customer Care                                                                      Baseband troubleshooting


Easy flash programming does not work
The flash programming can also be done via the easy flash connector.
In case of Flash failure in FLALI station, swap the phone and send it back to the care program for further analysis.
Possible failures could be short-circuit of balls under µBGAs (UEMCLite, UPP4M, FLASH). Missing or misaligned
components.
In flash programming error cases the flash prommer can give some information about a fault. The fault
information messages could be:
- Phone does not set FBUS_TX line low
Because of the use of uBGA components it is not possible to verify if there is a short circuit in control- and address
lines of MCU (UPP4M) and memory (flash).




Page 1–8                                     Company Confidential                          9243364 (Issue 1, Part 2)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                       Nokia Customer Care




                                      Figure 3 Easy flash programming fault

Power does not stay on or the phone is jammed
If this kind of a failure is presenting itself immediately after FLALI, it is most likely caused by ASIC's missing
contact with PWB.
If the MCU doesn’t service the watchdog register within the UEMCLite, the operations watchdog will run out
after approximately 32 seconds. Unfortunately, the service routine can not be measured.




9243364 (Issue 1, Part 2)                    Company Confidential                                          Page 1–9
                                   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                          RH-70
Nokia Customer Care                                                                    Baseband troubleshooting




                           Figure 4 Power does not stay on or the phone is jammed

Display shows "Contact Service"
This error can only happen at power up where several self-tests is run. If any of these test cases fails the display
will show the message: "Contact Service".
It's individual test cases so the below lineup of error hunting's has no chronological order. Use common sense
and experience to decide which test case to start error hunting at.




Page 1–10                                   Company Confidential                         9243364 (Issue 1, Part 2)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                      Nokia Customer Care




                     Figure 5 Troubleshooting when the "Contact Service" message is seen

The phone does not register to the networks, or the phone can not make a call
If the phone doesn't register to the network, the fault can be in either BB or RF. Only few signals can be tested
since several signals is 'buried' in one or more of the inner layers of the PWB.
First of all check that SIM LOCK is not causing the error by using a Test-SIM card and connect the phone to a tester.




9243364 (Issue 1, Part 2)                   Company Confidential                                         Page 1–11
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                     RH-70
Nokia Customer Care                                                               Baseband troubleshooting




                                       Figure 6 No registering or call

   SIM related faults

Insert SIM card fault
The hardware of the SIM interface from UEMCLite (D2200) to the SIM connector (X2700) can be tested without
a SIM card. When the power is switched on the phone first check for a 1.8SIM card and then a 3V SIM card. The
phone will try this four times, where after it will display ”Insert SIM card”.




Page 1–12                                 Company Confidential                      9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                 Nokia Customer Care




                                        Figure 7 Insert SIM card fault




                                           Figure 8 Signal diagram

SIM card rejected
The error ”SIM card rejected” means that the ATR message received from SIM card is corrupted, e.g. data signal
levels are wrong. The first data is always ATR and it is sent from card to phone.
For reference a picture with normal SIM power-up is shown below.




9243364 (Issue 1, Part 2)                 Company Confidential                                     Page 1–13
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                   Baseband troubleshooting




                                           Figure 9 Signal diagram

   User interface

Blank display
The display does not show any information at all.




                                           Figure 10 Blank display

Display is corrupt
The display contains missing or fading segments or color presentation is incorrect.




Page 1–14                                 Company Confidential                         9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                        Nokia Customer Care




                                          Figure 11 Display is corrupt

Dead keys
Not a single key is responding.




                                             Figure 12 Dead keys

No backlight for display or keys
There is no backlight on the display or on the keys.




9243364 (Issue 1, Part 2)                   Company Confidential                         Page 1–15
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Baseband troubleshooting




                       Figure 13 No backlight for display or keys




Page 1–16                       Company Confidential                 9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                  Nokia Customer Care


   Audio troubleshooting

Audio troubleshooting using phoenix




                               Figure 14 Phoenix audio test window




9243364 (Issue 1, Part 2)             Company Confidential                         Page 1–17
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                       RH-70
Nokia Customer Care                                                                 Baseband troubleshooting




                                        Figure 15 PWB audio test points

Check microphone using "Hp microphone in Ext speaker out" loop

Steps
1.   Connect phone with Phoenix.
2.   Open “audio test” window from “Testing -> Audio test”, as shown in Figure Phoenix audio test window above.
3.   Select “Hp microphone in Ext speaker out”
4.   Select “Loop” as “On”
5.   Input sound at microphone port, for example 94 dB SPL 1 kHz.
6.   Check if signal is detected at XEARP/N pads, shown in Figure PWB audio test points above.




Page 1–18                                   Company Confidential                      9243364 (Issue 1, Part 2)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                                  Nokia Customer Care




                                  Figure 16 Test arrangement for microphone


Check earpiece using "Ext microphone in Hp speaker out" loop

Steps
1.   Connect phone with Phoenix.
2.   Open “audio test” window from “Testing -> Audio test”, as shown in Figure Phoenix audio test window above.
3.   Select “Ext microphone in Hp speaker out”
4.   Select “Loop” as “On”
5.   Input signal to XMICP/N pads, as shown in Figure PWB audio test points above, for example 100 mVpp, 1 kHz.
6.   Check if sound is heard in earpiece.




                                    Figure 17 Test arrangement for earpiece


Check IHF & ringing tone function using "Buzzer"

Steps
1.   Connect phone with Phoenix.
2.   Open “audio test” window from “Testing -> Audio test”, as shown in Figure Phoenix audio test window above.
3.   In “Buzzer” area, select suitable signal to be played, for example 1 kHz, Strength 5”
4.   Select “Volume” as “On”
5.   Check if sound is heard in IHF.




9243364 (Issue 1, Part 2)                   Company Confidential                                    Page 1–19
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                          RH-70
Nokia Customer Care                                                                    Baseband troubleshooting




                            Figure 18 Checking IHF and ring tone by using "Buzzer"


Check vibra function using "Vibra control"

Steps
1.   Connect phone with Phoenix.
2.   Open “Vibra control” window from “Testing -> Vibra control”, as shown in the figure below.
3.   Select suitable intensity value, for example 53 %.
4.   Select “Vibra state” as “Enabled”
5.   Click “Write”.
6.   Check if Vibra works.




                            Figure 19 Checking vibra function by using vibra control




Page 1–20                                   Company Confidential                        9243364 (Issue 1, Part 2)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                  Nokia Customer Care


Earpiece fault




                                Figure 20 Earpiece fault flow chart




9243364 (Issue 1, Part 2)             Company Confidential                         Page 1–21
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                          RH-70
Nokia Customer Care                                                    Baseband troubleshooting


IHF/ringing tone fault




                         Figure 21 IHF/ringing tone fault flow chart




Page 1–22                          Company Confidential                 9243364 (Issue 1, Part 2)
                         Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                  Nokia Customer Care


Headset earpiece fault




                            Figure 22 Headset earpiece fault flow chart




9243364 (Issue 1, Part 2)             Company Confidential                         Page 1–23
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Baseband troubleshooting


Microphone fault




                         Figure 23 Microphone fault flow chart




Page 1–24                       Company Confidential                 9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Baseband troubleshooting                                                    Nokia Customer Care


Headset microphone fault




                            Figure 24 Headset microphone fault flow chart




9243364 (Issue 1, Part 2)              Company Confidential                          Page 1–25
                             Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                 Baseband troubleshooting




                          (This page left intentionally blank.)




Page 1–26                       Company Confidential                 9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




            2 — RF troubleshooting




9243364 (Issue 1, Part 2)             Company Confidential                Page 2–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                      RF troubleshooting




                          (This page left intentionally blank.)




Page 2–2                        Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                                                                                                 Nokia Customer Care


                                                                                 Table of Contents
General RF troubleshooting.........................................................................................................................................................2–5
   General RF troubleshooting...................................................................................................................................................2–5
   RF key components...................................................................................................................................................................2–5
Auto tuning.......................................................................................................................................................................................2–6
Receiver..............................................................................................................................................................................................2–7
   General instructions for GSM 900 RX troubleshooting..................................................................................................2–7
   Troubleshooting diagram for GSM 900 receiver..............................................................................................................2–9
   General instructions for GSM 1800 RX troubleshooting.............................................................................................2–10
   Troubleshooting diagram for GSM 1800 receiver.........................................................................................................2–12
   Measurement points in the receiver.................................................................................................................................2–13
Transmitter.....................................................................................................................................................................................2–14
   General instructions for GSM 900 TX troubleshooting................................................................................................2–14
   Troubleshooting diagram for GSM 900 transmitter....................................................................................................2–16
   GSM 900 TX output power....................................................................................................................................................2–18
   General instructions for GSM 1800 TX troubleshooting..............................................................................................2–21
   Troubleshooting diagram for GSM 1800 transmitter..................................................................................................2–23
   GSM 1800 TX output power.................................................................................................................................................2–25
Synthesizer troubleshooting ....................................................................................................................................................2–28
   Introduction.............................................................................................................................................................................2–28


List of Figures
Figure 25 RF key components on PWB.....................................................................................................................................2–5
Figure 26 Supply points at UEM (D2200)..................................................................................................................................2–6
Figure 27 Supply point at RF IC (N7600)..................................................................................................................................2–6
Figure 28 Auto tuning concept with CMU200.........................................................................................................................2–7
Figure 29 Auto tuning concept with RX and TX tuning devices and splitter................................................................2–7
Figure 30 GSM 900 RF controls window...................................................................................................................................2–8
Figure 31 GSM 900 Receiver troubleshooting........................................................................................................................2–9
Figure 32 900 RX I/Q signal waveform..................................................................................................................................2–10
Figure 33 GSM 1800 RF controls window..............................................................................................................................2–11
Figure 34 GSM 1800 Receiver troubleshooting...................................................................................................................2–12
Figure 35 1800 RX I/Q signal waveform................................................................................................................................2–13
Figure 36 RX measurements point of the control voltages to FEM N7700.................................................................2–13
Figure 37 Measurement points at the RX SAW Filters – Z7600/Z7602.........................................................................2–14
Figure 38 RX I/Q signals..............................................................................................................................................................2–14
Figure 39 GSM 900 RF controls window................................................................................................................................2–15
Figure 40 GSM 900 transmitter troubleshooting................................................................................................................2–16
Figure 41 TX I/O signal................................................................................................................................................................2–17
Figure 42 VC1, VC3 signals..........................................................................................................................................................2–17
Figure 43 TXP signal.....................................................................................................................................................................2–18
Figure 44 TXC signals at PCL5....................................................................................................................................................2–18
Figure 45 TX I/O signal................................................................................................................................................................2–19
Figure 46 VC1, VC3 signals..........................................................................................................................................................2–19
Figure 47 TXP signal.....................................................................................................................................................................2–20
Figure 48 TXC signals at PCL5....................................................................................................................................................2–20
Figure 49 TXC signals at PCL19.................................................................................................................................................2–21
Figure 50 GSM 1800 RF controls window..............................................................................................................................2–22
Figure 51 GSM 1800 transmitter troubleshooting.............................................................................................................2–23
Figure 52 TX I/O signal................................................................................................................................................................2–24

9243364 (Issue 1, Part 2)                                             Company Confidential                                                                                              Page 2–3
                                                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                                                                                         RH-70
Nokia Customer Care                                                                                                                                         RF troubleshooting

Figure 53 VC1, VC2, VC3 signals.................................................................................................................................................2–24
Figure 54 TXP signal.....................................................................................................................................................................2–25
Figure 55 TXC signals at PCL0....................................................................................................................................................2–25
Figure 56 TX I/O signal................................................................................................................................................................2–26
Figure 57 VC1, VC2, VC3 signals.................................................................................................................................................2–26
Figure 58 TXP signal.....................................................................................................................................................................2–27
Figure 59 TXC signals at PCL0....................................................................................................................................................2–27
Figure 60 TXC signals at PCL15.................................................................................................................................................2–28
Figure 61 PLL Troubleshooting diagram...............................................................................................................................2–29
Figure 62 VCXO 26 MHz waveform...........................................................................................................................................2–30
Figure 63 Measurement point for VCXO.................................................................................................................................2–30




Page 2–4                                                          Company Confidential                                                            9243364 (Issue 1, Part 2)
                                                        Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                          Nokia Customer Care


   General RF troubleshooting

General RF troubleshooting

Most RF semiconductors are static discharge sensitive
Two types of measurements are used in the following. It will be specified if the measurement type is "RF" or "LF".
• RF measurements are done with a Spectrum Analyzer and a high-frequency 500 ohm passive probe, for
  example HP54006A. (Note that when measuring with the 500 ohm probe the signal will be around 20 dB
  attenuated. The values in the following will have these 20 dB subtracted and represent the real value seen
  on the spectrum analyzer). Note that the testing have some losses which must be taken into consideration
  when calibrating the test system.
• LF (Low frequency) and DC measurements should be done with a 10:1 probe and an oscilloscope. The probe
  used in the following is 10 Mohm/8pF passive probe. If using another probe then bear in mind that the
  voltages displayed may be slightly different. Always make sure the measurement set-up is calibrated when
  measuring RF parameters on the antenna pad. Remember to include the loss in the module repair jig when
  realigning the phone.
So ESD protection must be applied during repair (ground straps and ESD soldering irons). RF IC N7600 and FEM
are moisture sensitive so parts must be pre-baked prior to soldering. Apart from key-components described in
this document there are a lot of discrete components (resistors, inductors and capacitors) for which
troubleshooting is done by checking if soldering of the component is done properly and checking if the
component is missing from PWB. Capacitors can be checked for short-circuiting and resistors for value by means
of an ohmmeter, but be aware in-circuit measurements should be evaluated carefully. In the following both
the name EGSM and GSM 900 will be used for the lower band and both PCN and GSM 1800 will be used for the
upper band.

RF key components


                                     Figure 25 RF key components on PWB

 N7600                                                    RF IC
 N7700                                                    FEM (PA and antenna switch)
 Z7602                                                    EGSM 900 RX SAW filter
 Z7600                                                    DCS 1800 RX SAW filter
 Z7603                                                    EGSM 900 TX filter
 Z7604                                                    DCS 1800 TX filter
 B7600                                                    26 MHz crystal

Refer to the picture below for measuring points at the UEM (D2200).




9243364 (Issue 1, Part 2)                   Company Confidential                                        Page 2–5
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                            RH-70
Nokia Customer Care                                                                            RF troubleshooting




                                     Figure 26 Supply points at UEM (D2200)




                                      Figure 27 Supply point at RF IC (N7600)

    Auto tuning

Context
This phone can be tuned automatically. Autotune is designed to align the phone's RF part easier and faster. It
performs calibrations, tunings and measurements of RX and TX. The results are displayed and logged in a result
file, if initiated.
Hardware requirements for auto tuning:
•   PC (Windows 2000/NT) with GPIB card
•   Power supply
•   Product specific module jig
•   Cables: 3 (alt.1) RF cable, 1 GPIB cable and DAU-9S
•   Signal analyser (TX), signal generator (RX) and RF-splitter or one device including all.



Page 2–6                                     Company Confidential                        9243364 (Issue 1, Part 2)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                        Nokia Customer Care




                                 Figure 28 Auto tuning concept with CMU200




                  Figure 29 Auto tuning concept with RX and TX tuning devices and splitter

Copy the two phone specific ini-files, for example rm_13_tunings.ini and autotune_RM-13.ini, to a phone specific
folder, for example \Phoenix\products\RM-13\.

Steps
1. Make sure the phone (in the jig) is connected to the equipment. Else, some menus will not be shown in
   Phoenix.
2. The first time you are using automatic tuning on this phone model, on this computer, you will have to Set
   loss for cables and jigs.
3. To go to autotune, select Tuning (Alt-U) > Auto-Tune (Alt-A) from the menu.
4. If you need more assistance, please refer to the Phoenix Help.

   Receiver

General instructions for GSM 900 RX troubleshooting

Steps
1. Connect the phone to a PC with the module repair jig.
2. Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3. Select File and Scan product.


9243364 (Issue 1, Part 2)                  Company Confidential                                       Page 2–7
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                RH-70
Nokia Customer Care                                                                RF troubleshooting

4. Wait a while for the PC to read the information from the phone.
5. Select Testing and RF Controls.
6. Set the parameters as follows:
   i Active Unit: RX
   ii Band: GSM 900
   iii Operation Mode: Continuous mode
   iv RX/TX Channel 37
   v AGC: 8: FEG_ON + DTOS_ON+BB_6=Vgain_36
7. The setup should now look like this:




                                  Figure 30 GSM 900 RF controls window




Page 2–8                                  Company Confidential                9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                    Nokia Customer Care


Troubleshooting diagram for GSM 900 receiver




                                Figure 31 GSM 900 Receiver troubleshooting

By measuring with an oscilloscope at RXIP or RXQP on a working GSM900 receiver this picture should be seen.
Signal amplitude 114mVp-p. DC offset 1.0V.




9243364 (Issue 1, Part 2)                 Company Confidential                                    Page 2–9
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                         RF troubleshooting


Results




                                     Figure 32 900 RX I/Q signal waveform

General instructions for GSM 1800 RX troubleshooting

Steps
1.   Connect the phone to a PC with the module repair jig.
2.   Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3.   Select File and Scan product.
4.   Wait a while for the PC to read the information from the phone.
5.   Select Testing and RF Controls.
6.   Set the parameters as follows:
     i     Active Unit: RX
     ii    Band: GSM 1800
     iii   Operation Mode: Continuous mode
     iv    RX/TX Channel 700
     v     AGC: 8: FEG_ON + DTOS_ON+BB_6=Vgain_36




Page 2–10                                   Company Confidential                      9243364 (Issue 1, Part 2)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                            Nokia Customer Care

7. The setup should now look like this:




                                  Figure 33 GSM 1800 RF controls window




9243364 (Issue 1, Part 2)                 Company Confidential                         Page 2–11
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                      RF troubleshooting


Troubleshooting diagram for GSM 1800 receiver




                               Figure 34 GSM 1800 Receiver troubleshooting

By measuring with an oscilloscope at RXIP or RXQP on a working GSM1800 receiver this picture should be seen.
Signal amplitude 114mVp-p. DC offset 1.0V.




Page 2–12                                 Company Confidential                     9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                     Nokia Customer Care


Results




                                    Figure 35 1800 RX I/Q signal waveform

Measurement points in the receiver




                     Figure 36 RX measurements point of the control voltages to FEM N7700




9243364 (Issue 1, Part 2)                  Company Confidential                                 Page 2–13
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                      RF troubleshooting




                      Figure 37 Measurement points at the RX SAW Filters – Z7600/Z7602




                                          Figure 38 RX I/Q signals


  Transmitter

General instructions for GSM 900 TX troubleshooting

Steps
1. Apply a RF-cable to the RF-connector to allow the transmitted signal act as normal. RF-cable should be
   connected to an attenuator at least 10dB before connected to the measurement equipment, otherwise the
   PA may be damaged.
2. Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3. Select File and Scan product.
4. Wait a while for the PC to read the information from the phone.
5. Select Testing and RF Controls.
6. Set the parameters as follows:
   i    Band: GSM 900


Page 2–14                                 Company Confidential                    9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                            Nokia Customer Care

   ii Active Unit: RX
   iii TX Power Level: 5
   iv TX Data Type: Random
7. The setup should now look like this:




                                   Figure 39 GSM 900 RF controls window




9243364 (Issue 1, Part 2)                 Company Confidential                         Page 2–15
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                    RH-70
Nokia Customer Care                                                                    RF troubleshooting


Troubleshooting diagram for GSM 900 transmitter




                              Figure 40 GSM 900 transmitter troubleshooting

Measure the output power of the phone; it should be about 32.5dBm. Remember the cable loss is about 0.3dB.




Page 2–16                                Company Confidential                    9243364 (Issue 1, Part 2)
                               Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                        Nokia Customer Care




                                      Figure 41 TX I/O signal




                                    Figure 42 VC1, VC3 signals




9243364 (Issue 1, Part 2)             Company Confidential                         Page 2–17
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                      RF troubleshooting




                                            Figure 43 TXP signal




                                       Figure 44 TXC signals at PCL5

GSM 900 TX output power

Measure the output power of the phone; it should be about 32.5 dBm. Remember the cable loss is about 0.3 dB.




Page 2–18                                 Company Confidential                     9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                        Nokia Customer Care




                                      Figure 45 TX I/O signal




                                    Figure 46 VC1, VC3 signals




9243364 (Issue 1, Part 2)             Company Confidential                         Page 2–19
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                      RF troubleshooting




                                 Figure 47 TXP signal




                             Figure 48 TXC signals at PCL5




Page 2–20                       Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                   Nokia Customer Care




                                      Figure 49 TXC signals at PCL19

General instructions for GSM 1800 TX troubleshooting

Steps
1. Apply a RF-cable to the RF-connector to allow the transmitted signal act as normal. RF-cable should be
   connected to an attenuator at least 10dB before connected to the measurement equipment, otherwise the
   PA may be damaged.
2. Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3. Select File and Scan product.
4. Wait a while for the PC to read the information from the phone.
5. Select Testing and RF Controls.
6. Set the parameters as follows:
   i     Band: GSM 1800
   ii    Active Unit: RX
   iii   TX Power Level: 5
   iv    TX Data Type: Random




9243364 (Issue 1, Part 2)                 Company Confidential                                Page 2–21
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                RH-70
Nokia Customer Care                                                                RF troubleshooting

7. The setup should now look like this:




                                  Figure 50 GSM 1800 RF controls window




Page 2–22                                 Company Confidential                9243364 (Issue 1, Part 2)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                   Nokia Customer Care


Troubleshooting diagram for GSM 1800 transmitter




                             Figure 51 GSM 1800 transmitter troubleshooting

Measure the output power of the phone; it should be about 29.5dBm. Remember the cable loss is about 0.5dB.




9243364 (Issue 1, Part 2)                Company Confidential                                  Page 2–23
                               Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                      RF troubleshooting


Results




                                Figure 52 TX I/O signal




                            Figure 53 VC1, VC2, VC3 signals




Page 2–24                       Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                     Nokia Customer Care




                                            Figure 54 TXP signal




                                       Figure 55 TXC signals at PCL0

GSM 1800 TX output power

Measure the output power of the phone; it should be about 29.5 dBm. Remember the cable loss is about 0.5 dB.




9243364 (Issue 1, Part 2)                 Company Confidential                                   Page 2–25
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                      RF troubleshooting




                                Figure 56 TX I/O signal




                            Figure 57 VC1, VC2, VC3 signals




Page 2–26                       Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                        Nokia Customer Care




                                       Figure 58 TXP signal




                                   Figure 59 TXC signals at PCL0




9243364 (Issue 1, Part 2)             Company Confidential                         Page 2–27
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                              RH-70
Nokia Customer Care                                                                              RF troubleshooting




                                          Figure 60 TXC signals at PCL15

   Synthesizer troubleshooting

Introduction
There is only one PLL synthesizer generating Local Oscillator frequencies for both RX and TX in both bands (PCN
and EGSM). The VCO frequency is divided by 2 for PCN operation or by 4 for EGSM operation inside the RF IC.
The 26MHz oscillator is located near the RF IC (N7600). The coarse frequency for this oscillator is set by an external
crystal (B7600). The reference oscillator is used as a reference frequency for the PLL synthesizer and as the
system clock for the Baseband. The 26MHz signal is divided by 2 to achieve 13MHz inside the UPP IC (D2800).




Page 2–28                                    Company Confidential                          9243364 (Issue 1, Part 2)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
RF troubleshooting                                                                        Nokia Customer Care




                                   Figure 61 PLL Troubleshooting diagram

The 26MHz signal from the VCXO can be measured by probing R2900. The level at this point is approx. 770mVpp.
Frequency of this oscillator is adjusted by changing the AFC-register inside the UEM IC. Example Signal Measured
at VCXO output (R2900).




9243364 (Issue 1, Part 2)                  Company Confidential                                      Page 2–29
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care                                                      RF troubleshooting




                           Figure 62 VCXO 26 MHz waveform




                        Figure 63 Measurement point for VCXO




Page 2–30                       Company Confidential                9243364 (Issue 1, Part 2)
                      Copyright ©2005 Nokia. All Rights Reserved.
   Nokia Customer Care




Service Manual

    RH-70 (Nokia 1110)
 Mobile Terminal
Part No: (9243364 (Issue 1, Part 3))




       Company Confidential




   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                      RH-70
Nokia Customer Care




                          (This page left intentionally blank.)




Page ii                         Company Confidential                9243364 (Issue 1, Part 3)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Nokia 1110 Service Manual Structure                                          Nokia Customer Care


Nokia 1110 Service Manual Structure
1 System module
2 Schematics




9243364 (Issue 1, Part 3)                Company Confidential                            Page iii
                               Copyright ©2005 Nokia. All Rights Reserved.
                                                                                               RH-70
Nokia Customer Care                                               Nokia 1110 Service Manual Structure




                          (This page left intentionally blank.)




Page iv                         Company Confidential                         9243364 (Issue 1, Part 3)
                      Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




                   1 — System module




9243364 (Issue 1, Part 3)             Company Confidential                Page 1–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                     RH-70
Nokia Customer Care                                                          System module




                          (This page left intentionally blank.)




Page 1–2                        Company Confidential                9243364 (Issue 1, Part 3)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                                                                                                      Nokia Customer Care


                                                                                 Table of Contents
Block diagram..................................................................................................................................................................................1–5
   System module block diagram.............................................................................................................................................1–5
   Functional description.............................................................................................................................................................1–6
Baseband description....................................................................................................................................................................1–6
   UPP ................................................................................................................................................................................................1–6
   UEMCLite.......................................................................................................................................................................................1–6
   External regulators...................................................................................................................................................................1–7
   Energy management................................................................................................................................................................1–7
   Modes of operation...................................................................................................................................................................1–8
   Voltage limits..............................................................................................................................................................................1–9
   Audio function description.....................................................................................................................................................1–9
   External audio connector.....................................................................................................................................................1–11
   External signals and connections......................................................................................................................................1–11
Interfaces.........................................................................................................................................................................................1–12
   RF and baseband interfaces................................................................................................................................................1–12
   Analogue Signals.....................................................................................................................................................................1–15
   LCD interface.............................................................................................................................................................................1–16
   Keyboard....................................................................................................................................................................................1–16
   SIM interface.............................................................................................................................................................................1–17
   External signals and connections......................................................................................................................................1–11
   Battery connector...................................................................................................................................................................1–19
   Battery........................................................................................................................................................................................1–20
   PWB outline..............................................................................................................................................................................1–21
RF description................................................................................................................................................................................1–21
   Frequency band, power and multi-slot class.................................................................................................................1–21
   Transmitter - general description.....................................................................................................................................1–21
   Transmitter - signal processing..........................................................................................................................................1–22
   VCXO and PLL............................................................................................................................................................................1–22


List of Tables
Table 1 RF power supply...............................................................................................................................................................1–7
Table 2 Baseband power supply................................................................................................................................................1–7
Table 3 Voltage limits....................................................................................................................................................................1–9
Table 4 Connector for External Audio Accessories..............................................................................................................1–11
Table 5 System connector..........................................................................................................................................................1–11
Table 6 AC and DC Characteristics of BB4.0 LiteV2 RF-Base band Digital Signals......................................................1–12
Table 7 AC and DC Characteristics of RF-Base band Analogue Signals.........................................................................1–15
Table 8 The electrical parameters...........................................................................................................................................1–18
Table 9 System connector..........................................................................................................................................................1–11
Table 10 Battery IF........................................................................................................................................................................1–19
Table 11 Frequency bands and TX power class...................................................................................................................1–21
Table 12 Multi-slot class..............................................................................................................................................................1–21


List of Figures
Figure 1 Module block diagram..................................................................................................................................................1–5
Figure 2 Power connection diagram........................................................................................................................................1–8
Figure 3 SIM filtering......................................................................................................................................................................1–8
Figure 4 Audio block diagram...................................................................................................................................................1–10

9243364 (Issue 1, Part 3)                                             Company Confidential                                                                                               Page 1–3
                                                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                                                                                    RH-70
Nokia Customer Care                                                                                                                                         System module

Figure 5 4-pole jack plug for audio accessory.....................................................................................................................1–11
Figure 6 Keyboard schematics..................................................................................................................................................1–17
Figure 7 Keyboard layout in UI side........................................................................................................................................1–17
Figure 8 BL-5C battery connection order..............................................................................................................................1–20
Figure 9 BL-5C battery block......................................................................................................................................................1–20
Figure 10 PWB top side component placement.................................................................................................................1–21




Page 1–4                                                        Company Confidential                                                        9243364 (Issue 1, Part 3)
                                                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                           Nokia Customer Care


   Block diagram

System module block diagram
The main board consists of a radio frequency part and a baseband part. The User Interface parts are situated
at the UI side, which is on the opposite side of the engine board. The 1MF is the system module of the mobile
device.




                                       Figure 1 Module block diagram



9243364 (Issue 1, Part 3)                 Company Confidential                                      Page 1–5
                                Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                              System module


Functional description
The BB core is based on UPP4M CPU. UPP4M takes care of all the signal processing and operation controlling
tasks of the mobile device. For power management, there is one main ASIC for controlling, charging and
supplying power UEMCLite plus a discrete power supply. The UEMCLite generates the main reset for the system.
Memories comprise 128 Mbit flash and 16 Mbit PsRAM. Memory devices are stacked on top of each other in a
single Combo package.
The UEMCLite also handles the interface to the RF and audio sections. This ASIC provides A/D and D/A conversion
of the in-phase and quadrate receive and transmit signal paths and also A/D and D/A conversions of received
and transmitted audio signals. Data transmission between UEMCLite and RF and the UPP4M is implemented
using different serial connections (CBUS, DBUS and RFBUS). UPP4M ASIC handles digital speech processing.
A real time clock function is integrated into UEMCLite, which utilizes the same 32 kHz-clock source as the sleep
clock. The SLCK/RTC runs all time when the phone battery is connected. It is running also when the phone is
switched off. In UEMCLite there is no back up battery/capacitor connection.
There are two audio transducers in the product; 13 mm speaker and a microphone. The speaker is used to
generate audios for earpiece, IHF and ringing tones. A separate audio amplifier drives the speaker. There is only
one microphone for both HS and IHF modes.
The display is a CSTN type color display with 65536 colors and 128 x 128 pixels with backlighting. The UI module
features a function key mat with a 4-way navigation key with a center selection key.

   Baseband description

UPP
UPP (Universal Phone Processor) is the digital ASIC of the DCT4 generation base band. In LiteV2 BB the UPP4M_v3/
UPP4Mv4 and UPP2Mv2 are supported types. UPP4Mv3 includes 4.5 MBit internal RAM, ARM7TDMI rev4 16/32-
bit RISC MCU core, TI Lead3 16-bit DSP phase2+ core with DMA controller, ROM for MCU boot code and all digital
control logic. UPP general purpose IO (GENIO) can be used for predefined HW purpose or but they can also be
controlled with SW for product specific features.

Memory
This mobile uses two kinds of memories, Flash and Synchronous RAM (SRAM). These memories have are sharing
the same bus interface to UPP4M. SDRAM is used as the working memory. Interface is 16 bit wide data and 14
bit address. Memory clocking speed is 52 MHz. The SRAM size is 16 Mbits.
SRAM I/O is 1.8 V and core 1.8 V supplied by UEMCLite regulator VIO. All memory contents are lost if the supply
voltage is switched off.
Multiplexed flash memory interface is used to store the MCU program code and user data. The memory interface
is a burst type FLASH with multiplexed address/data bus, running at 52 MHz.
Configuration of flash memory is a 128 Mbit NOR flash memory. Flash I/O and core voltage are 1.8 V supplied
by UEMCLite’s VIO.

UEMCLite
Power management in the RM-74/75 follows the DCT4 Core design, having anyhow less regulators than
traditional architecture. The UEMCLite, that is a low cost energy management ASIC with completely new design
contains for BB use two 2.78V LDO regulators, 1.8V linear regulator, programmable 1.0 - 1.5 V linear regulator
and 1.8/3.0 V LDO regulator. For RF use UEMCLite has five 2.78 V LDOs. In addition, the UEMCLite contains audio
codec, A/D converters, RF converters, many drivers, etc.
Below is a list of the supply voltages.




Page 1–6                                    Company Confidential                       9243364 (Issue 1, Part 3)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                             Nokia Customer Care

                                           Table 1 RF power supply

             Vmin/V Vtyp/V Vmax/V ItypmA Imax                Notes
                                         mA
 VR1         2.7       2.78     2.86        65        75      VTX (Supply voltage for PMB3258 LO and RX parts
 VR2         2.7       2.78     2.78        2.4       3.0     VXO (VCXO supply voltage)
 VR3         2.7       2.78     2.86        41        47      VTX2 (Supply voltage for PMB3258 modulator
                                                              output stage)
 VR4         2.7       2.78     2.86        43        48      VRX (Supply for RFIC RX and TX parts)
 VR5         2.7       2.78     2.86        29        35      VPLL (Supply for VCO, PLL and digital parts
 VBATTRF     3.1       3.6      4.7         1.5       3.5     Supply voltage for the front-end module (Vbatt,
                                                              max=6.0 V)

The table below shows the typical current consumption in different operation modes.

                                       Table 2 Baseband power supply

Signal, Nom Volt.,      Min-Max Voltage (V)       Iqmax                   PSSR(dB)*          Notes
Max Current
 VANA, 2,78V, 80mA      2.7-2.86                   200                     50, 40            Disabled in sleep
                                                                                             mode
 VBB1 2,78V, sleep      2.7-2.86                   15 sleep, 200           40, -             Sleep mode
 2mA, norm. 50mA                                                                             possibility
 VSIM, 1.8/3.0, 25mA    1.745- 1.8552.910-         30 sleep, 80            40, -             Sleep mode
                        3.090                                                                possibility,
                                                                                             programmable
 VIO, 1.8V              1.72 - 1.88                15 sleep, 100           45, -             Sleep mode
                                                                                             possibility
 VCORE,1.055/1.25/      1.0 - 1.111.188 -          20 sleep, 200           40, -             Sleep,
 1.35/1.5V              1.3131.285                                                           programmable,
                        -1.4151.425 -1.575                                                   Initial voltage
                                                                                             1.35V from reset

External regulators
White LED Driver solution is implemented with DC/DC converter. The driver circuit is controlled by UEM output
pin DLIGHT, which add external pull up using a digital transistor and one resistor. The schematics also combined
the UEMIO (5) to control DC/DC enable as another optional using two jumper.

Energy management

Filter components
The master of EM control is UEMCLite and with SW it has the main control of the system voltages and operating
modes. The power distribution diagram is presented in the illustration below.




9243364 (Issue 1, Part 3)                    Company Confidential                                     Page 1–7
                                   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                             System module




                                     Figure 2 Power connection diagram

All connectors going to the “outside world” have filter components, ESD protection and EMC reduction.
The Digital/Data lines on SIM have special dedicated filter ASIP. The below figure show the SIM filtering.




                                             Figure 3 SIM filtering

The Audio circuit: Earpiece, IHF, internal microphone and external speaker are filtered with discrete components
(common mode reduction coils, Varistors, caps and resistors), where as the external microphone uses
differential mode mic. ASIP
The 16 UEMECLite BB & RF regulators are specified to have a decoupling cap of 1 µF ±20%.

Modes of operation
BB4.0 LiteV2 base band has five different functional modes, which are defined in UEMCLite specification:




Page 1–8                                   Company Confidential                        9243364 (Issue 1, Part 3)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                               Nokia Customer Care

• No supply: In NO_SUPPLY mode, the phone has no supply voltage. This mode is due to disconnection of main
  battery or low battery voltage level in battery. Phone is exiting from NO_SUPPLY mode when sufficient battery
  voltage level is detected. Battery voltage can rise either by connecting a new battery with VBAT > VMSTR+ or
  by connecting charger and charging the battery above VMSTR+.
• Acting Dead: If the phone is off when the charger is connected, the phone is powered on but enters a state
  called ”Acting Dead”. To the user, the phone acts as if it was switched off. A battery charging alert is given
  and/or a battery charging indication on the display is shown to acknowledge the user that the battery is
  being charged.
• Active: In the Active mode the phone is in normal operation, scanning for channels, listening to a base station,
  transmitting and processing information. There are several sub-states in the active mode depending on if
  the phone is in burst reception, burst transmission, if DSP is working etc. One of the sub-states of the active
  mode is FM radio on state. In that case, Audio Amplifier and FM radio are powered on. FM radio circuitry is
  controlled by the MCU and 32kHz-reference clock is generated in the UPP. BBLite supports also the MIC3 audio
  path enabling also in the sleep mode allowing for example the FM radio listening during sleep mode. This
  requires that the FM radio work with 32kHz sleep clock frequency.
  In Active mode the RF regulators are controlled by SW writing into UEMCLite’s registers wanted settings: VR
  regulators can be disabled, enabled or forced into low quiescent current mode. VR2 is always enabled in
  Active mode for system clock chain supply
• Sleep: In sleep mode VCTCXO is shut down and 32 kHz sleep clock oscillator is used as reference clock for the
  base band.
• Charging: Charging can be performed in any operating mode. The battery type / size is indicated by a resistor
  inside the battery pack. The resistor value corresponds to a specific battery capacity. This capacity value is
  related to the battery technology as different capacity values are achieved by using different battery
  technology. The battery voltage, temperature, size and current are measured by the UEMCLite and controlled
  by the charging software running in the UPP. The charging control circuitry (CHACON) inside the UEMCLite
  controls the charging current delivered from the charger to the battery. The battery voltage rise is limited
  by turning the UEMCLite switch off when the battery voltage has reached 4.2 V. Charging current is monitored
  by measuring the voltage drop across a 220 mW resistor. The PWM output doesn’t exist any more from
  UEMCLite to the bottom connector

Voltage limits
                                            Table 3 Voltage limits

Parameter                             Description                           Value/V
 Vmstr+                                Master reset threshold (rising)       2.1 ±0.1
 Vmstr-                                Master reset threshold (falling)      1.9 ±0.1
 Vcoff+                                Hardware cutoff (rising)              3.1 ±0.1
 Vcoff-                                Hardware cutoff (falling)             2.8 ±0.1
 SW shutdown                           SW cutoff limit (> regulator drop-    3.2 V
                                       out limit) MIN!

Audio function description

Audio
The basic audio structure and communication between HW-audio modules and the audio ASIC's is illustrated
in the block diagram below.




9243364 (Issue 1, Part 3)                   Company Confidential                                        Page 1–9
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                        RH-70
Nokia Customer Care                                                                             System module




                                        Figure 4 Audio block diagram

UEMCLite supports three microphone inputs and two earphone outputs. The microphone signals from different
sources are connected to separate inputs at the UEMCLite ASIC. The inputs and outputs are all differential.
Three inputs (MIC1, MIC2, MIC3) and two outputs (EAR, HF/HFCM) are used. MIC1P/MIC1N input is used for the
internal microphone, using single-ended biasing circuitry. EARP/EARN output from UEMCLite is used for hand-
portable mode.
Uplink external audio (headset as well as car kit) is connected to MIC2P/MIC2N, while downlink audio is provided
via the HF/HFCM output from UEMCLite. The car kit only can be used with external microphone connected.
MIC3 (positive input) connects to single ended outputs from the FM radio. The other input MIC3N is AC-coupled
to GND.
The audio control is taken care of by UEMCLite, which contains the MCU and audio codec. Input and output
selection, and gain control is performed inside UEMCLite. DTMF-tones and other audio tones are generated and
encoded by UPP and transmitted to UEMCLite for decoding.
An external amplifier (D-class) is connected to provide sufficient power for an 8 W load. The inputs are wired
to the headset connections HF and HFCM from UEMCLite.
EARP/N output is used for hand-portable speech, connected with PA output through switches.
Under normal conditions HF and HFCM is used for downlink audio to the headset/car kit. During headset/car kit
usage the audio amplifier is disabled by means of the shutdown pin. Keeping the shutdown pin "low" also
during sleep, secures a minimum amount of standby current to be consumed.
SMD vibra has a diameter is about 4.0-mm. Vibra is driven by PWM signal, generating vibration by rotating an
un-balanced mass (counter weight) with radius of R=2.3-mm. The vibration signal is used as a silent alert call
and also as a noticeable shock in gaming.




Page 1–10                                  Company Confidential                       9243364 (Issue 1, Part 3)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                                Nokia Customer Care


External audio connector
The system connector, containing a 4-pole Jack plug, gains the access to the external audio interface. The Jack
plug, which is integrated in the system connector, contains a mechanical switch, which is used to detect the
connection of the accessories. The configuration for the 4-pole Jack-plug is shown in the following figure.




                                   Figure 5 4-pole jack plug for audio accessory

                             Table 4 Connector for External Audio Accessories

Line symbol                                               Function
 XMICP                                                     External microphone signal input
 XMICN                                                     External microphone signal input
 XEARP                                                     External earphone signal output
 XEARN                                                     External earphone signal output
 INT                                                       Accessory detection
 GND                                                       Ground (Only used by PPH-1)

External signals and connections
                                            Table 5 System connector

   Signal       From          To      Min       Nom        Max         Condi-tion                Note
 XMICP       HS/HF Mic      UEMC                 2/60mV               Analog           Headset Mic bias and audio
                            Lite                 diff                 audio in         signal 2mV nominal. HF Mic
                                                                                       signal 60mV nominal.
                                                                                       Differential symmetric
                                                                                       input.
                                                                      DC bias          Accessory detection by
                                                                      2V2kohm          bias loading
 XMICN                                           2/60mV               Ana in / 1k to   Hook interrupt by heavy
                                                 diff                 GND              bias loading




9243364 (Issue 1, Part 3)                    Company Confidential                                       Page 1–11
                                   Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                               RH-70
Nokia Customer Care                                                                                    System module

  Signal       From       To        Min        Nom           Max         Condi-tion                   Note
 XEARP      HS/HF       UEMC                   100 mV                    Ana in             Quasi-differential DC-
                        Lite                   diff                                         coupled earpiece/HF
 XEARN      EAR/
                                                                                            amplifier signal to
            Amp.
                                                                                            accessory. DC biased to
                                                                                            0.8V
 INT        Switch      UEMC                   0/2.7V                    Dig in             HS interrupt from bottom
 HEADINT                Lite                                                                connector switch when
                                                                                            plug inserted.
 VCHARIN    Charger     UEMC                   11.1Vp        16.9        Standard           Vch from Charger
                        Lite                   eak           Vpeak                          Connector, max 20V
                                                             7.9
                                                             VRMS
                                                             1.0
                                                             Apeak
                                     7.0       8.4           9.2         Fast charger
                                     VRMS      VRMS          VRMS
                                                             850 mA
 GND                                                         GND                            GND from/to Charger
                                                                                            connector

  Interfaces

RF and baseband interfaces
            Table 6 AC and DC Characteristics of BB4.0 LiteV2 RF-Base band Digital Signals

   Signal       From       To       Para-meter                  Input characteristics                   Function
   name
                                                          Min      Typ      Max         Unit
 TXP1          UPP       RF-IC      1                 1.38                   1.88       V            Depends of the
                                                                                                     RF design
 RFGenOut      GenIO5               0                 0                      0.4        V
 3
                                    Load              10                                kW
                                    Resistance
                                    Load                                     20         pF
                                    Capacitance
                                    Timing                                   ¼          symbol
                                    Accuracy




Page 1–12                                  Company Confidential                              9243364 (Issue 1, Part 3)
                                 Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                              Nokia Customer Care

   Signal        From         To       Para-meter               Input characteristics            Function
   name
                                                          Min    Typ      Max       Unit
 TXP2          UPP          RF-IC      1              1.38                 1.88     V         Depends of the
                                                                                              RF design
               (GenIO6)                0              0                    0.4      V
                                       Load           10                            kW
                                       Resistance
                                       Load                                20       pF
                                       Capacitance
                                       Timing                              ¼        symbol
                                       Accuracy
 RFBusEn1      UPP          RF-IC      1              1.38                 1.88     V         RFIC Chip SelX
 X
                                       0              0                    0.4      V
                                       Internal PU                         50       uA
                                       Current
                                       Load           10                            kW
                                       resistance
                                       Load                                20       pF
                                       capacitance
 RFBusDa       UPP / RF-    RF- IC/    1              1.38                 1.88     V         Bi-directional
               IC           UPP                                                               RF Control serial
                                       0              0                    0.4      V
                                                                                              bus data,
                                       Load           10                            kW
                                       resistance
                                       Load                                20       pF
                                       capacitance
                                       Data                                13       MHz
                                       frequency
 RFBusClk      UPP          RF IC      1              1.38                 1.88     V         RF Control serial
                                                                                              bus bit clock
                                       0              0                    0.4      V
                                       Load           10                            kW
                                       resistance
                                       Load                                20       pF
                                       capacitance
                                       Data                                13       MHz
                                       frequency




9243364 (Issue 1, Part 3)                     Company Confidential                                   Page 1–13
                                    Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                   RH-70
Nokia Customer Care                                                                        System module

   Signal      From       To       Para-meter             Input characteristics             Function
   name
                                                    Min     Typ      Max      Unit
 GENIO3      UEMCLite   RF IC      1                        2.78              V          RF Control *
                                   0                                          V          Depends of the
                                                                                         RF design
                                   Load                                       kW
                                   resistance
                                   Output                             4       mA
                                   current
 GENIO4      UEMCLite   RF IC      1                        2.78              V          Audio clock
                                                                                         input in
                                   0                                          V
                                                                                         UEMCLiteV3 and
                                   Load                                       kW         LittiV2
                                   resistance
                                   Output                             4       mA
                                   current
 GENIO5      UEMCLite   RF IC      1                        2.78              V          RF Control *
                                   0                                          V          Depends of the
                                                                                         RF design
                                   Load                                       kW
                                   resistance
                                   Output                             4       mA
                                   current




Page 1–14                                 Company Confidential                    9243364 (Issue 1, Part 3)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                                Nokia Customer Care


Analogue Signals
                  Table 7 AC and DC Characteristics of RF-Base band Analogue Signals

   Signal       From          To       Parameter       Min     Typ     Max            Unit         Function
   name
 RFCLK        VCTCXO        UPP        Frequency              13/26               MHz        System Clk from RF to
                                                                                             BB,
                                       Signal         0.2     0.8     1.32        Vpp        13/26 MHz Depending
                                       amplitude                                             on RF chipset
                                       Input          10                          kW         UPP minimum
                                       Impedance                                             recommended
                                                                                             amplitude is 0.3Vpp.
                                       Input                          10          pF
                                       Capacitance
                                       Harmonic                       -8          dBc
                                       Content
                                       Clear signal   200                         mVpp
                                       window (no
                                       glitch)
                                       Duty Cycle     40              60          %
 RFCLKGnd     VCTCXO        UPP        DC Level               0                   V          System Clock slicer Ref
                                                                                             GND, not separated
                                                                                             from pwb GND layer
 RXIP,        RF-IC         UEMCL      Voltage                1.4     1.45        Vpp        Differential positive /
 RXIN,                      ite        swing                                                 negative in-phase and
                                       (static)                                              quadrature Rx Signals.
 RXQP,
                                       DC level       1.3     1.35    1.4         V
 RXQN
                                       I/Q                            0.2         dB
                                       amplitude
                                       mismatch
                                       I/Q phase      -0.5            0.5         deg
                                       mismatch
 TXIP,        UEMCLite      RF-IC      Differential   2.25            2.45        Vpp        Differential positive /
 TXIN,                                 voltage                                               negative in-phase and
                                       swing                                                 quadrature Tx Signals
 TXQP,                                 (static)
                                                                                             In High-Z when RX is
 TXQN
                                                                                             receiving.
                                       DC level       1.17    1.20    1.23        V
                                       Source                         200         W
                                       Impedance




9243364 (Issue 1, Part 3)                     Company Confidential                                      Page 1–15
                                    Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                             RH-70
Nokia Customer Care                                                                                  System module

   Signal       From         To       Parameter      Min      Typ      Max           Unit             Function
   name
 AFC           UEMCLite    VCTCX      Voltage Min   0.0               0.1        V             Automatic Frequency
                           O                                                                   Control signal for
               (AFCOUT                Max           2.4               2.55
                                                                                               VCTCXO
               )
                                                                                               Programmable
                                      Resolution               11                bits
                                      Load          1                            kW
                                      resistance
                                      and                             100        nF
                                      capacitance
                                      Source                          200        W
                                      Impedance
                                      Output        10                           MW            Path powered down
                                      impedance
 TxC           UEMCLite    RF-IC      Voltage Min                     0.1        V             Transmitter power
                                                                                               level and ramping
               (AUXOUT                Max           2.4
                                                                                               control, Ref UEMCLite
               )
                                                                                               RF converter
                                      Source                          200        W             specification
                                      Impedance
                                      Resolution               10                bits
 VCXOTEMP      RF-IC       UEMCL      Input         0                 2.7        V
                           ite        voltage
                                      range
                                      Input         900               6000       Ohm
                                      resistance
                                      Resolution               10                bits
 PATEMP        RF-IC       UEMCL      Voltage at             1.57                V             Usage depends of the
                           ite        -20oC                                                    RF design

LCD interface
The figure below illustrates the structure of LCD module. LCD module includes UV tape, Driver IC, Prism sheet,
LGP, Flex Assy, label Tape, Adhesive Tape, Protection film, LCD glass, Rim Tape, Diffuser, Reflector and Holder
Frame.
LCD panel includes upper and lower polarizers, LCD transflective glass, single chip COG driver with
132x132x116bit RAM, 10-pin board-to-board connector and FPC with discrete components.

Keyboard
A 5 X 5 matrix keyboad consists of 21keys, one 10-channel integrated passive filiter arrays with downstream
ESD protection of >8KV connect the matrix keyboard to UPP.




Page 1–16                                    Company Confidential                           9243364 (Issue 1, Part 3)
                                   Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                               Nokia Customer Care




                                         Figure 6 Keyboard schematics

The layout is shown in Keyboard layout in UI side.




                                      Figure 7 Keyboard layout in UI side

SIM interface
The SIM interface is programmed to support 3V and 1.8V SIMs. SIM supply voltage is selected by with register
in the UEMCLite. It is only allowed to change the SIM supply voltage when the SIM IF is powered down. The SIM
power up/down sequence is generated in the UEMCLite.
The SIM interface is powered up when the SIMCardDet signal indicates ”card in”. This signal is derived from the
BSI signal.
SIM interface is implemented in two ASICs, UPP and UEMCLite. The SIM interface is the electrical interface between
the Subscriber Identity Module Card (SIM Card) and mobile phone (via UEMCLite device).




9243364 (Issue 1, Part 3)                   Company Confidential                                       Page 1–17
                                  Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                    RH-70
Nokia Customer Care                                                                         System module

                                       Table 8 The electrical parameters

  Pin        Name         Parameter           Min        Typ        Max       Unit           Notes
   1          VSIM        1.8V SIM Card        1.6       1.8         1.9       V      Supply voltage
                          3V SIM Card          2.8       3.0         3.2       V
   2         SIMRST       1.8V SIM Card     0.9xVSIM                VSIM       V      SIM reset (output)
                                                0                 0.15xVSIM
                          3V SIM Card       0.9xVSIM                VSIM       V
                                                0                 0.15xVSIM
   3         SIMCLK        Frequency                     3.25                 MHz     SIM clock. UPP4Mv3
                                                                                      and UPP4mv4
                           Trise/Tfall                               50       ns
                                                                                      support 3GPP
                            1.8V Voh        0.9xVSIM                VSIM       V      Release 5, SIMCLK/8
                            1.8V Vol            0                                     data rate. UPP2Mv2
                                                                                      supports SIMCLK/16
                             3V Voh         0.9xVSIM                VSIM       V      data rate.
                             3V Vol             0
   4          DATA          1.8V Voh        0.9xVSIM                VSIM       V      SIM data (output)
                            1.8V Vol            0                 0.15xVSIM
                             3V Voh         0.9xVSIM                VSIM
                             3V Vol             0                 0.15xVSIM
                            1.8V Vih        0.7xVSIM                VSIM       V      SIM data (input)
                            1.8V Vil            0                 0.15xVSIM           Trise/Tfall max 1us
                             3V Vil         0.7xVSIM                VSIM
                             3V Vil             0                 0.15xVSIM
   5           NC                                                                     Not connected
   6          GND             GND               0                     0        V      Ground
 VSIM specified in regulator section in this document




Page 1–18                                 Company Confidential                     9243364 (Issue 1, Part 3)
                                Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                                    Nokia Customer Care


External signals and connections
                                                Table 9 System connector

   Signal       From            To        Min       Nom       Max         Condi-tion                    Note
 XMICP        HS/HF Mic      UEMC                   2/60mV                Analog            Headset Mic bias and audio
                             Lite                   diff                  audio in          signal 2mV nominal. HF Mic
                                                                                            signal 60mV nominal.
                                                                                            Differential symmetric
                                                                                            input.
                                                                          DC bias           Accessory detection by
                                                                          2V2kohm           bias loading
 XMICN                                              2/60mV                Ana in / 1k to    Hook interrupt by heavy
                                                    diff                  GND               bias loading
 XEARP        HS/HF          UEMC                   100 mV                Ana in            Quasi-differential DC-
                             Lite                   diff                                    coupled earpiece/HF
 XEARN        EAR/
                                                                                            amplifier signal to
              Amp.
                                                                                            accessory. DC biased to
                                                                                            0.8V
 INT          Switch         UEMC                   0/2.7V                Dig in            HS interrupt from bottom
 HEADINT                     Lite                                                           connector switch when
                                                                                            plug inserted.
 VCHARIN      Charger        UEMC                   11.1Vp    16.9        Standard          Vch from Charger
                             Lite                   eak       Vpeak                         Connector, max 20V
                                                              7.9
                                                              VRMS
                                                              1.0
                                                              Apeak
                                           7.0      8.4       9.2         Fast charger
                                           VRMS     VRMS      VRMS
                                                              850 mA
 GND                                                          GND                           GND from/to Charger
                                                                                            connector

Battery connector
Internal, user-changeable batteries. Semi-fixed. Types: Li-Ion, NiMH. Interface, 4 terminals (VBATT, GND, BSI,
BTEMP) Janette battery interface is used. The battery type and size are defined in the next chapter.

                                                   Table 10 Battery IF

   Signal      From             To         Min      Nom      Max         Condi-tion                  Note
 GND          Global        Batt (-)                                                       Global GND
 VBAT                       Batt (+)        3.1              5.1                           Battery Voltage




9243364 (Issue 1, Part 3)                        Company Confidential                                          Page 1–19
                                       Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                      RH-70
Nokia Customer Care                                                                           System module

  Signal       From          To       Min       Nom      Max        Condi-tion              Note
 BSI                     UEMCLite      0                 2.78                    Analog input, Battery Size
                                                                                 Indicator Resistor, 100
                                                                                 kohm pull up to 2.78V
                                                                                 (VBB1). FDL Init, refer to
                                                                                 flash download.
 BTEMP                   UEMCLite      0                 2.78                    Btemp NTC Resistor, 100
                                                                                 kohm pull up to 2.78V
                                                                                 (VANA)

* Note! In BL-5C battery IF the BTEMP signal doesn’t exists. Temperature measurement is done on system board
with NTC resistor.




                                    Figure 8 BL-5C battery connection order

Battery
• Type: BL-5C
• Technology: Li-Ion, 4.2 V charging, 3.1 V cut-off
• Capacity: 900 mAh.
The BSI resistor is placed on the main PWB as the telephone supports only one battery capacity. Further a BSI
connection is added to the Flash interface. The battery temperature is measured by a NTC resistor placed on
the main PWB, opposite to the Battery. Battery pack has an impedance of 130 - 150 mΩ (0 – 45 °C).




                                           Figure 9 BL-5C battery block




Page 1–20                                   Company Confidential                    9243364 (Issue 1, Part 3)
                                  Copyright ©2005 Nokia. All Rights Reserved.
RH-70
System module                                                                              Nokia Customer Care


PWB outline




                                Figure 10 PWB top side component placement

   RF description

Frequency band, power and multi-slot class
The requirements leads to the specification in the table below:

                              Table 11 Frequency bands and TX power class

           System                           Frequency band                            TX power class
 GSM900                        Tx: 880 – 915 MHz                                         4 (33dBm)
                               Rx: 925 – 960 MHz
 GSM1800                       Tx: 1710 – 1785 MHz                                       1 (30dBm)
                               Rx: 1805 – 1880 MHz

                                           Table 12 Multi-slot class

                                                Multislot Class
          GPRS                                          MSC 6 (up to 3+1 and 2+2)

Transmitter - general description
The transmitter has 2 separate parallel paths one covering the 900 band and the other the 1800 band. The
transmitter operates in GMSK mode only. The power level control circuitry is integrated in the front-end module.
Each path of the transmitter is composed of a baseband lowpass filter for the I/Q signals and a quadrature direct
modulator integrated in PMB3258. At the modulator’s output there is a bandpass filter for each band (so-called
H3 filter) and a balun transformer to convert the differential output signal from the modulator into a single-
ended 50 ohm signal. This signal is fed into the input of the PA. The two power amplifiers and the antenna
switch are located in a single module with built-in power control loop.




9243364 (Issue 1, Part 3)                  Company Confidential                                       Page 1–21
                                 Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                         RH-70
Nokia Customer Care                                                                              System module

The two control methods used are open-loop Vcc control (RFMD) and feedback control with current sensing
(Renesas, Philips). The reference waveform (TXC) for the control loop comes from the baseband. The output of
the PA goes into a low pass filter located inside the FEM (Front End Module). Finally the transmit signal goes
through the band selection and TX/RX switches to the antenna port.
The FEM is controlled with four digital control signals (TXP, Vc1, Vc2 and Vc3) to meet the TDMA frame timing
requirements.

Transmitter - signal processing
The I/Q signals coming from the baseband section are fed into the modulator and converted up to the carrier
frequency. The I/Q are post filtered by a 1st order passive RC filter (discrete components on PWB) and a 3rd
order active filter (Legendre type) inside PMB3258.
The nominal output level of the modulator is +3.5 dBm in both bands. The modulator's output is an open-
collector type and need an external load and a DC supply feed. The load and the DC supply feed are implemented
as the part of the H3 filter. The H3 filter will attenuate mainly the 2nd and 3rd harmonics of the modulated RF
signal and provide suitable termination impedance for the modulator on the fundamental and harmonic
frequencies. Owing to the low noise floor of the PMB3258 modulator a narrow-band filter for the TX noise is
not required on either band, although the margin to the specification limit is quite narrow in the GSM900 band.
The filtered signal is fed into the input of the FEM, which amplifies it to the desired power level and provides
the signal at the antenna port. There are built-in lowpass filters for the TX harmonics in the front-end module.
There is also a temperature sensor close to the FEM to enable SW temperature compensation for e.g. the power
levels. The sensor is connected to one of the slow ADC channels in the baseband.

VCXO and PLL
The VCO frequency is locked by a PLL (phase locked loop) into a stable frequency source given by a VCXO. The
frequency of the VCXO is in turn locked into the frequency of the base station with the help of an AFC (automatic
frequency control) voltage, which is generated in the UEM. The reference frequency is 26 MHz.
The VCXO also provides a 26 MHz system clock for the digital baseband.
The PLL is located in PMB3258 and it is controlled via the RFBUS.




Page 1–22                                  Company Confidential                        9243364 (Issue 1, Part 3)
                                 Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




                            2 — Schematics




9243364 (Issue 1, Part 3)              Company Confidential                Page 2–1
                             Copyright ©2005 Nokia. All Rights Reserved.
                                                                                     RH-70
Nokia Customer Care                                                              Schematics




                          (This page left intentionally blank.)




Page 2–2                        Company Confidential                9243364 (Issue 1, Part 3)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                                                                                                      Nokia Customer Care


                                                                                Table of Contents
Schematics.........................................................................................................................................................................................2–4


List of Figures
Figure 11 UPP, UEM, Combo memory, Radio, SIM (1jv_50e)...............................................................................................2–4
Figure 12 UI, keyboard, Audio (1jv_50e)..................................................................................................................................2–5
Figure 13 RF part (1jv_50e)..........................................................................................................................................................2–6
Figure 14 Signal overview (1jv_50e).........................................................................................................................................2–7
Figure 15 Component finder (1jv_50e).....................................................................................................................................2–8




9243364 (Issue 1, Part 3)                                            Company Confidential                                                                                            Page 2–3
                                                           Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                                    Nokia Customer Care


   Schematics

UPP, UEM, Combo memory, Radio, SIM




                                     Figure 11 UPP, UEM, Combo memory, Radio, SIM (1jv_50e)


9243364 (Issue 1, Part 3)                            Company Confidential                               Page 2–4
                                           Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                Nokia Customer Care


UI, keyboard, Audio




                              Figure 12 UI, keyboard, Audio (1jv_50e)
9243364 (Issue 1, Part 3)             Company Confidential                          Page 2–5
                            Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                Nokia Customer Care


RF part




                                    Figure 13 RF part (1jv_50e)
9243364 (Issue 1, Part 3)             Company Confidential                          Page 2–6
                            Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                Nokia Customer Care


Signal overview




                                Figure 14 Signal overview (1jv_50e)
9243364 (Issue 1, Part 3)             Company Confidential                          Page 2–7
                            Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Schematics                                                                Nokia Customer Care


Component finder




                               Figure 15 Component finder (1jv_50e)
9243364 (Issue 1, Part 3)             Company Confidential                          Page 2–8
                            Copyright ©2005 Nokia. All Rights Reserved.
                            Nokia Customer Care




                                  Glossary




9243364 (Issue 1, Part 3)             Company Confidential                Page Glossary–1
                            Copyright ©2005 Nokia. All Rights Reserved.
                                                                                       RH-70
Nokia Customer Care                                                        Glossary of terms




                          (This page left intentionally blank.)




Page Glossary–2                 Company Confidential                9243364 (Issue 1, Part 3)
                      Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Glossary of terms                                                                       Nokia Customer Care

 A/D-converter              Analog-to-digital converter
 ACI                        Accessory Control Interface
 ADC                        Analog-to-digital converter
 ADSP                       Application DPS (expected to run high level tasks)
 AGC                        Automatic gain control (maintains volume)
 ALS                        Ambient light sensor
 AMSL                       After Market Service Leader
 ARM                        Advanced RISC Machines
 ARPU                       Average revenue per user (per month or per year)
 ASIC                       Application Specific Integrated Circuit
 ASIP                       Application Specific Interface Protector
 B2B                        Board to board, connector between PWB and UI board
 BB                         Baseband
 BC02                       Bluetooth module made by CSR
 BIQUAD                     Bi-quadratic ,type of filter function)
 BSI                        Battery Size Indicator
 BT                         Bluetooth
 CBus                       MCU controlled serial bus connected to UPP_WD2,UEME and Zocus
 CCP                        Compact Camera Port
 CDSP                       Cellular DSP (expected to run at low levels)
 CLDC                       Connected limited device configuration
 CMOS                       Complimentary metal-oxide semiconductor circuit (low power consumption)
 COF                        Chip on Foil
 COG                        Chip on Glass
 CPU                        Central Processing Unit
 CSR                        cambridge silicon radio
 CSTN                       Color Super Twisted Nematic
 CTSI                       Clock Timing Sleep and interrupt block of Tiku
 CW                         Continuous wave
 D/A-converter              Digital-to-analouge converter
 DAC                        Digital-to-analouge converter
 DBI                        Digital Battery Interface
 DBus                       DSP controlled serial bus connected between UPP_WD2 and Helgo
 DCT-4                      Digital Core Technology
 DMA                        Direct memory access
 DP                         Data Package

9243364 (Issue 1, Part 3)                     Company Confidential                          Page Glossary–3
                                    Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                    RH-70
Nokia Customer Care                                                                     Glossary of terms

 DPLL                 Digital Phase Locked Loop
 DSP                  Digital Signal Processor
 DtoS                 Differential to Single ended
 EDGE                 Enhanced data rates for global/GSM evaluation
 EGSM                 Extended GSM
 EM                   Energy management
 EMC                  Electromagnetic compability
 EMI                  Electromagnetic interference
 ESD                  Electrostatic discharge
 FCI                  Functional cover interface
 FPS                  Flash Programming Tool
 FR                   Full rate
 FSTN                 Film compensated super twisted nematic
 GND                  Ground, conductive mass
 GPIB                 General-purpose interface bus
 GPRS                 General Packet Radio Service
 GSM                  Group Special Mobile/Global System for Mobile communication
 HF                   Hands free
 HFCM                 Handsfree Common
 HS                   Handset
 HSCSD                High speed circuit switched data (data transmission connection faster than GSM)
 HW                   Hardware
 I/O                  Input/Output
 IBAT                 Battery current
 IC                   Integrated circuit
 ICHAR                Charger current
 IF                   Interface
 IHF                  Integrated hands free
 IMEI                 International Mobile Equipment Identity
 IR                   Infrared
 IrDA                 Infrared Data Associasion
 ISA                  Intelligent software architecture
 JPEG/JPG             Joint Photographic Experts Group
 LCD                  Liquid Crystal Display
 LDO                  Low Drop Out
 LED                  Light-emitting diode

Page Glossary–4                         Company Confidential                    9243364 (Issue 1, Part 3)
                              Copyright ©2005 Nokia. All Rights Reserved.
RH-70
Glossary of terms                                                                          Nokia Customer Care

 LPRF                       Low Power Radio Frequency
 MCU                        Micro Controller Unit (microprocessor)
 MCU                        Multiport control unit
 MIC, mic                   Microphone
 MIDP                       Mobile Information Device Profile
 MIN                        Mobile identification number
 MIPS                       Million instructions per second
 MMC                        Multimedia card
 MMS                        Multimedia messaging service
 NTC                        Negative temperature coefficient, temperature sensitive resistor used as a
                            temperature sensor
 OMA                        Object management architechture
 OMAP                       Operations, maintenance, and administartion part
 Opamp                      Operational Amplifier
 PA                         Power amplifier
 PDA                        Pocket Data Application
 PDA                        Personal digital assistant
 PDRAM                      Program/Data RAM (on chip in Tiku)
 Phoenix                    Software tool of DCT4.x
 PIM                        Personal Information Management
 PLL                        Phase locked loop
 PM                         (Phone) Permanent memory
 PUP                        General Purpose IO (PIO), USARTS and Pulse Width Modulators
 PURX                       Power-up reset
 PWB                        Printed Wiring Board
 PWM                        Pulse width modulation
 RC-filter                  Resistance-Capacitance filter
 RF                         Radio Frequency
 RF PopPort TM              Reduced function PopPortTM interface
 RFBUS                      Serial control Bus For RF
 RSK                        Right Soft Key
 RS-MMC                     Reduced size Multi Media Card
 RSSI                       Receiving signal strength indicator
 RST                        Reset Switch
 RTC                        Real Time Clock (provides date and time)
 RX                         Radio Receiver


9243364 (Issue 1, Part 3)                     Company Confidential                              Page Glossary–5
                                    Copyright ©2005 Nokia. All Rights Reserved.
                                                                                                     RH-70
Nokia Customer Care                                                                      Glossary of terms

 SARAM                Single Access RAM
 SAW filter           Surface Acoustic Wave filter
 SDRAM                Synchronous Dynamic Random Access Memory
 SID                  Security ID
 SIM                  Subscriber Identity Module
 SMPS                 Switched Mode Power Supply
 SNR                  Signal-to-noice ratio
 SPR                  Standard Product requirements
 SRAM                 Static random access memory
 STI                  Serial Trace Interface
 SW                   Software
 SWIM                 Subscriber/Wallet Identification Module
 TCXO                 Temperature controlled Oscillator
 Tiku                 Finnish for Chip, Successor of the UPP, Official Tiku3G
 TX                   Radio Transmitter
 UART                 Universal asynchronous receiver/transmitter
 UEME                 Universal Energy Management chip (Enhanced version)
 UEMEK                See UEME
 UI                   User Interface
 UPP                  Universal Phone Processor
 UPP_WD2              Communicator version of DCT4 system ASIC
 USB                  Universal Serial Bus
 VBAT                 Battery voltage
 VCHAR                Charger voltage
 VCO                  Voltage controlled oscillator
 VCTCXO               Voltage Controlled Temperature Compensated Crystal Oscillator
 VCXO                 Voltage Controlled Crystal Oscillator
 Vp-p                 Peak-to-peak voltage
 VSIM                 SIM voltage
 WAP                  Wireless application protocol
 WD                   Watchdog
 XHTML                Extensible hypertext markup language
 Zocus                Current sensor, (used to monitor the current flow to and from the battery)




Page Glossary–6                         Company Confidential                     9243364 (Issue 1, Part 3)
                              Copyright ©2005 Nokia. All Rights Reserved.

				
DOCUMENT INFO
Shared By:
Tags:
Stats:
views:185
posted:7/3/2012
language:Latin
pages:206