Learning Center
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>



  • pg 1

The damage range of Computer and How to Fix a summary of general damage that occurs there is a
computer and how to appeal or correct it. With this summary that I hope you have a computer going to be
a computer technician for yourself. At least if there is damage to the computer as listed below you can
handle yourself.A. Computer Will not Live How to fix:
  - Check the cable connection (from power outlet to the power button on PC)
  - Check that the stabilizer function or tdak (if using the stabilizer)
  - Check the power cable to the CPU
  - If you still do not want to live permasalahanya may lie in the power supply or MB2. Computer Mau
Mau Live But Not Booting How to Overcome It: Know First Beep Beep: Beep 1 time only sign that the
condition of both the computer beeps 1 time, There is a problem in the memory long beep 1 time and 3
times the short-term damage to the VGA card Beep a long time and 2 short beeps Damage in DRAM
parity Damage dimodul continuous memory or video memory - Checks dianosa using software such as
SiSoft Sandra, PC mark04, mark05 PC etc.3. Want to boot your computer, but always "Safe Mode" (to go
into safe mode press F8) How to fix:
  - Restart your computer again
  - If re-intall windows are still trouble you - if it is still safe mode as well, meaning you have problems
check with your HD: scan disk4. How to fix computer Hang Often
  - Due to software crashes
  - Press ctrl + alt + del >> click End Task on the program is "Not Responding" - press the restart button
on the CPU
  - Due to a hardware conflict (the addition of new hardware)
  - Conflicts between hardware common in windows operating system
  - Re-install your windows, but keep in mind before you reinstall windows, first remove your new
   - Alankan facility "add new" hardware found on the control panel.5. Keyboard is not recognized by
Computer How to Overcome It
   - Check whether your keyboard is plugged in correctly
   - If it already but still the keyboard is not detected then the keyboard is in trouble.
   - Try to replace your keyboard, if it has been replaced but the problem persists then it most likely is
damaged at the keyboard port on your MB.
   - If it's in the New Keyboard Replace remain undetected but Also Try to Change the Keyboard USB and
if not detected also means there is something wrong in the Windows system Buddies 6 Mouse not
recognized by the computer (the same case denagn keyboard)7. Mouse Pointer Always Hop-Skip How to
Overcome It
  - Clean up immediately on the mouse dirty (especially the mouse ball)8. Often Computer Crash How to
   - Check all the cable position, hardware, and also the voltage on the chassis, check the temperature of
the CPU and likewise check ram, processor and vga.9. When the producers MetherBoard (MB) Unknown
   How To Overcome It:
      - Open the casing, and check your CPU is usually a MB have a label manufacturer that also contains
the specification of the type Mbnya.
      - Look in the manual book
      - Find a Mb of data via the Internet, match ID is printed on the sticker board primarily to the list
contained on the website www.fcc.gov / oet / fccid, and find a list of ID numbers issued by the licensing
agency for electronic devices in the United
      - Use the analysis software, such as sandra99 etc..10. Forgot BIOS Password How to fix:
   - Unplug the batterey cmos cpu - Or by emncoba bberapa guess the default password for some
manufacturers eg AMI and AWARD bios (eg, AMI, AMI, AMI_SW, ALLY, 589 589 etc.)11. Clock and
setting the date BIOS-Fox Always Changing
   How To Overcome It:
      - Batteray cmos is not working (dead), replace with a new batteray12. Adding New Hardware Device,
Tp Not Detected By BIOS
   How To Overcome It:
      - Most likely you have old bios so that it can not detect the new hardware, then immediately update
your bios (can be downloaded via the internet, eg: www.windrivers.com)13. Damage track Card In MB
   How To Overcome It:
      - Denganmencabut try and stick some cards on the MB you - if the boot is successful then your card
is not problematic so likewise the opposite14. New Processor pairs Tp Not Detected How to Overcome It:
   - Check whether you have installed the processor correctly denan
   - Check whether the position of the jumpers on the processor is correct (about the jumper on the
processor can be found in the manual booknya Check new)15. Crash After Installing New RAM
   How To Overcome It:
      - The possibility that you plug the ram is not compatible with your computer (unplug the
ram)16. Adding RAM But Not Detected
   How To Overcome It:
      - Make a check such as the previous case - Ensure appropriate slot yan used, for example: SD RAM
has a slot which is similar to RAM but RD RD RAM, can not be detected although it could be installed in
slot type SD RAM.17. After Adding RAM Computer Manjadi The Slow Process
   How To Overcome It:
      - Look at your ram capacity limit, for example, EDO ram type the maximum limit is 64 MB, so when
forced to add it to your computer becoming increasingly slow18. Virtual Ram
   How To Overcome It:
      - Right-click the My Computer icon, choose properties, then select the performance tab and click the
    - Select the item let me specify my own virtual memory settings (select HD to be used as virtual
    - Bell-shaped OK19. Monitor Will not Flash
  How To Overcome It:
    - Make sure all power cables and connectors associated with the monitor ok
    - Make sure the pin is also available at the entrance to the VGA port sempuran nothing especially not
get all bent / pin into one VGA port
    - Make sure your VGA card is also ok20. Being a Dark Monitor When Loading Windows
  How To Overcome It:
    - Probably due to setup the right driver for your monitor (frequency setting is too high)
    - Get used to the conditions of safe mode (press F8)
    - Re-install driver VGAnya21. Suddenly Display Damage and Computer Hangs Manjadi
  How To Overcome It:
    - Due to the temperature (at the VA card) is very hot22. Display size monitor Not Available Wishlist
  How To Overcome It:
    - Go to display properties (click kana semabrang places select properties) - Click the settings tab and
adjust the size and appearance in accordance with the wishes of (the screean area)23. Blinking When
Used As Monitor
  How To Overcome It:
    - Go to display properties (click kana semabrang places select properties)
    - Press the tab and click advanced settings, then click the adapter, in this section are displayed
refresh raet dininkan24. New Sound Card Not Detected
  How To Overcome It:
    - Crash with the old card saounda
    - Check the manual booknya, if the soundcard on boardnya need to be switched off or not if you want
to re-install a new soundcard yan (usually can be turned off via jumper or bios

To top