Section 282300 - Video Surveillance System by lD0581

VIEWS: 10 PAGES: 14

									                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder          Guide Specifications in CSI Format

www.honeywellvideo.com                                                                800-09836 Rev B



                                             SECTION 282319

                 Digital Video Recording and Transmission System, Rapid Eye Hybrid HD



PART 1 GENERAL

1.1   SECTION INCLUDES

      A.    Provide a complete Digital Video Recording (DVR) and Transmission System, including
            design, supply, installation, and commissioning.

1.2   RELATED SECTIONS

NOTE TO SPECIFIER: Include related sections as appropriate if digital video recording and transmission
system is integrated to other systems.

      A.    Section 260500 – Common Work Results for Electrical, for interface and coordination with
            building electrical systems and distribution.

      B.    Section 280513 – Conductors and Cables for Electronic Safety and Security, for cabling
            between system recorders, panels and remote devices.

      C.    Section 280528 – Pathways for Electronic Safety and Security, for conduit and raceway
            requirements.

      D.    Section 281300 – Security Management System, for interface and coordination with
            electronic access control systems.

      E.    Section 282300 – Video Surveillance Equipment, for interface with, and administration of
            video recording devices and equipment.

1.3   REFERENCES

      A.    Reference Standards: Provide systems which meet or exceed the requirements of the
            following publications and organizations as applicable to the work of this Section:

            1.     Canadian ICES-003

            2.     Canadian Standards Association (CSA)

            3.     Conformity for Europe (CE)

            4.     Consultative Committee for International Radio (CCIR)

            5.     Electronic Industry Association (EIA)

            6.     Electrical Testing Laboratories (ETL)

            7.     Federal Communications Commission (FCC)

                                             282300-1
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder            Guide Specifications in CSI Format

www.honeywellvideo.com                                                                   800-09836 Rev B



           8.    Joint Photographic Experts Group (JPEG)

           9.    Moving Picture Experts Group (MPEG)

           10.   National Television Systems Committee (NTSC)

           11.   Phase Alternating by Line (PAL)

           12.   Underwriters Laboratories Inc. (UL)

1.4   SYSTEM DESCRIPTION

      A.   The Digital Video Recording (DVR) and Transmission System shall provide powerful,
           intelligent, enterprise-class, digital storage management that combines Video, Motion Video,
           Audio, and Data capabilities in a single DVR. User and security management shall be
           available either from a centralized control (for one DVR or many DVRs) or from a standalone
           DVR, or in combination.

      B.   Digital Video Recording (DVR) and Transmission System available in a minimum of
           seventeen (17) different configurations, allowing the user to select the right DVR for every
           application.

1.5   SUBMITTALS

      A.   General: Submittals shall be made in accordance with the Conditions of the Contract and
           Submittal Procedures Section.

      B.   Manufacturer’s Product Data: Submit manufacturer’s data sheets indicating systems and
           components proposed for use, including instruction manuals.

      C.   Shop Drawings and Schematics: Submit complete shop drawings including connection
           diagrams for interfacing equipment, list of connected equipment, and locations for major
           equipment components.

      D.   Record Drawings: During construction maintain record drawings indicating location of
           equipment and wiring. Submit an electronic version of record drawings not later than
           Substantial Completion of the project.

      E.   Operation and Maintenance Data: Submit manufacturer’s operation and maintenance data,
           customized to the system installed. Include system and operator manuals.

      F.   Field Tests: Submit results of field testing of every device including date, testing personnel,
           retesting date (if applicable), and confirmation that every device passed field testing.

      G.   Maintenance Service Agreement: Submit a sample copy of the manufacturer’s maintenance
           service agreement, including cost and services for a one (1) year period for Owner’s review.
           Maintenance shall include, but not be limited to, labor and materials to repair the system,
           tests and adjustments, and regular inspections.




                                             282300-2
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder          Guide Specifications in CSI Format

www.honeywellvideo.com                                                                800-09836 Rev B



1.6   QUALITY ASSURANCE

      A.   Manufacturer: Minimum ten (10) years experience in manufacturing and maintaining Digital
           Video Recording (DVR) and Transmission Systems. Manufacturer shall provide toll-free
           technical assistance and support, available 24/7.

      B.   Manufacturing Location: Provide equipment assembled in the United States.

      C.   Installer: Minimum two (2) years experience installing similar systems, and acceptable to the
           manufacturer of the system.

      D.   Environmental Conditions: Digital Video Recording (DVR) and Transmission Systems shall
           be designed to function in the following environmental conditions:

           1.    Operating Temperature: 40°F to 105°F (5°C to 40°C) non-condensing.

           2.    Emissions: FCC: Part 15, Class B; CE: EN 61000-6-3:2007; CE: EN 61000-3-2:2006.

           3.    Immunity: CE: EN 50130-4:1995 + A1:1998.

           4.    Safety: ETL Listed to UL 60950-1 / CSA; C22.2 No. 60950-1; CB report: IEC 60950-
                 1:2005.

      E.   Power Requirements: Components shall have the following electrical specifications:

           1.    Input Voltage: 100-240 V AC (60 Hz/50 Hz).

           2.    Operating Voltage: 120V/240V Auto-sensing.

           3.    Power Consumption: 350 W (maximum).

1.7   DELIVERY, STORAGE, AND HANDLING

      A.   Deliver materials in manufacturer’s labeled packages. Store and handle in accordance with
           manufacturer’s requirements, in a facility with environmental conditions within recommended
           limits.

1.8   WARRANTY

      A.   Manufacturer’s Warranty: Submit manufacturer’s warranty of thirty-six (36) months from the
           manufacture date code under normal use and service for the Digital Video Recorder (DVR).
           Submit manufacturer’s warranty of thirty-six (36) months from date of manufacture for hard
           drives.




                                             282300-3
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder          Guide Specifications in CSI Format

www.honeywellvideo.com                                                                 800-09836 Rev B



PART 2 PRODUCTS

2.1   MANUFACTURER

      A.   Digital Video Recording (DVR) and Transmission System Manufacturer: Honeywell Rapid
           Eye™ Hybrid HD Digital Video Recording (DVR) and Transmission System,
           www.honeywellvideo.com.

2.2   SYSTEM COMPONENTS

      A.   The Digital Video Recorder (DVR), that includes the hard drive(s) and connections to video
           surveillance devices in the system.

      B.   A mouse-driven, local user interface (“LocalView”), which only requires a mouse and VGA or
           DVI monitor to operate and configure the DVR.

      C.   A workstation/server-based administration tool (“ADMIN”) capable of enterprise-wide site
           and user management.

      D.   A feature-rich, workstation-based remote operator program (“VIEW”), used to retrieve and
           analyze video from a DVR, configure DVR options and perform remote user operations for
           up to sixty-four (64) DVRs and up to 1024 video streams simultaneously.

2.3   OPERATIONAL REQUIREMENTS

      A.   The Digital Video Recording (DVR) and Transmission System shall provide a powerful,
           intelligent, enterprise-class, digital storage tool that combines Video, Motion Video, Audio,
           and Data capabilities in a single DVR. This system must be designed to record, search, and
           transmit sixteen (16) channels of Video and/or Motion Video, two (2) channels of bi-
           directional Audio and up to sixteen (16) Data streams; both live and post-event.

      B.   The Digital Video Recording (DVR) and Transmission System and its components shall be
           thoroughly tested before shipping from the manufacturer’s facility.

      C.   The Digital Video Recording (DVR) and Transmission System’s default priority shall be to
           capture and store video, motion video, audio, data and alarms. The system must be
           configurable to prioritize live viewing and retrieval of video, if required.

      D.   The Digital Video Recording (DVR) and Transmission System shall use a Linux real-time
           operating system, running on a Solid State Hard Drive (SSD), to provide a secure, stable,
           multi-tasking environment for the DVR and its application software.

      E.   The Digital Video Recording (DVR) and Transmission System shall include two (2) USB
           connections on the front panel and four (4) USB connections on the rear panel of the unit for
           secure clip backup and distribution.

      F.   The Digital Video Recording (DVR) and Transmission System shall have following major
           capabilities:



                                             282300-4
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder            Guide Specifications in CSI Format

www.honeywellvideo.com                                                                   800-09836 Rev B



             1.    Live viewing of up to sixteen (16) IP and/or analog cameras on a single workstation
                   with a VGA or DVI monitor connected. Individual live video streams must be capable
                   of adjusting the resolution and quality rates, independent of recording settings, for a
                   flexible live monitoring workstation.

             2.    Capturing and converting analog video sources at real-time rates and CIF, 2CIF, and
                   4CIF resolutions into digital data suitable for storing on hard drives and/or remotely
                   transmitting.

             3.    Capturing and converting IP video sources from MPEG4 and H.264 video streams
                   into digital data suitable for storing on hard drives and/or remotely transmitting.
                   Maximum recording and viewing resolution for IP cameras is 1920x1080 (HD).

             4.    Secure storage and retrieval of recorded video for post-event analysis.

             5.    Compatible with most existing and new video equipment and incorporate into any
                   TCP/IP or dialup network. Communication options must include LAN, WAN, Internet,
                   and PSTN, all utilizing the system’s standard equipment (no additional hardware
                   required). Compatibility with ISDN and DSL must be supported using additional
                   hardware.

             6.    Retrieval of system files and remote software upgrades utilizing any of the
                   communication options.

             7.    Multiple simultaneous connections utilizing different network and/or communication
                   types.

             8.    Using an authenticated, proprietary file format (REM) to ensure the integrity of the
                   evidence.

             9.    User-defined data rates, size, frequency, and thresholds ensure that images and
                   system messages are delivered as quickly as possible within the capabilities of the
                   network’s available bandwidth.

             10.   Customizing the traditional time-lapse and boosted recording settings to provide the
                   maximum flexibility for extending the video archive while adding the capability to
                   automatically accelerate video recording settings based on predetermined rules. This
                   mission critical video is captured and stored at higher levels than the time-lapse video
                   archive.

NOTE TO SPECIFIER: DVR systems come with either 500 GB or one (1) TB for standard storage
capacity. One (1) TB units are specified in this document. Specify the storage availability that suits the
requirements. Active Alert units (units with Video Analytics included) can only be expanded to a three (3)
TB maximum storage capacity, due to the extra storage requirements of the analytics software.

             11.   Long term digital storage for recorded video, motion video, audio and data. The DVR
                   must be available in a one (1.0) TB standard storage offering. The DVR storage



                                             282300-5
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder          Guide Specifications in CSI Format

www.honeywellvideo.com                                                                 800-09836 Rev B



                 capacity must be expandable up to four (4.0) TB with the installation of additional hard
                 drives.

           12.   Estimating the typical number of days the DVR will record, based on the DVR hard
                 drive capacity, desired update rate (IPS), and the number and type of cameras being
                 recorded with the Storage Estimator software.

           13.   Minimum system update rate of 480 or 120 images per second (NTSC at CIF) or 400
                 or 100 images per second (PAL at CIF) for video recording, and is capable of
                 simultaneous live transmission.

           14.   An optional DVD-RW drive and/or USB port available for distributing evidence clips
                 that can include video, motion video, audio, and data.

           15.   All physical connections made directly to the DVR, without the need for additional
                 hardware (IP cameras connected to the local network are an exception).

           16.   Sixteen (16) BNC composite video inputs, each with a corresponding BNC looping
                 video output. The video input BNCs must be auto-terminating. DVRs support up to a
                 combined total of sixteen (16) analog and IP camera video inputs.

           17.   Up to sixteen (16) channels of IP video inputs connected through the local area
                 network (LAN). DVRs support up to a combined total of sixteen (16) analog and IP
                 camera video inputs.

           18.   One (1) BNC composite monitor output for spot monitoring functionality.

           19.   Eight (8) individually user-configurable serial ports (RS232/RS422/RS485). Used for
                 wiring PTZ control directly to the DVR, expanding data capture capabilities (POS or
                 ATM) for up to sixteen (16) streams, and allowing the use of a SMARTPIT device.

           20.   One (1) 10/100 Base T Fast Ethernet internal Network Interface Card (NIC) must be
                 included in the DVR, with the standard RJ45 supporting CAT5 cable provided as
                 standard equipment.

           21.   Alarm Inputs and Outputs have TTL and 12 V rating, making them compatible with
                 traditional physical Alarm devices.

           22.   Connecting to a designated PC (“Alarm Station”), using either a telephone connection
                 or network connection, when an alarm is triggered by a user-defined event.

     G.    LocalView interface shall provide the following operator functions:

           1.    Capability of configuring and operating the system without the need for a separate
                 computer.

           2.    Displaying real-time live video of a single camera or any valid grid combination of all
                 connected cameras. LocalView can be used for interactive monitoring, as needed, or
                 for continuous public view monitoring.


                                             282300-6
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder                Guide Specifications in CSI Format

www.honeywellvideo.com                                                                       800-09836 Rev B



           3.    Vector driven control of PTZ cameras with a connected mouse.

           4.    Capability of enabling accelerated recording rates, while viewing live video, for five (5)
                 minutes (default) with a single-click Boost button.

           5.    Customizing the traditional time-lapse and boosted recording settings to provide the
                 maximum flexibility for extending the video archive while adding the capability to
                 automatically accelerate video recording settings based on predetermined rules. This
                 mission critical video is captured and stored at higher levels than the time-lapse video
                 archive.

           6.    Password protected PTZ control to prevent control of PTZ cameras by unauthorized
                 LocalView users.

     H.    Admin Workstation shall provide the following operator functions:

           1.    Site Management (DVRs and locations) to group sites by location, DVR type, and so
                 on. Site management options facilitate the management of large central databases.

           2.    Setting up LAN/WAN Network and/or TCP/IP Dial-up communications for all the sites
                 in the system. DVRs must provide an option for TCP/IP port forwarding (multiple units
                 sharing the same IP address).

           3.    User Management (Users and Roles), to add/edit/delete roles and to associate
                 predefined privileges with the roles, and then add/edit/delete users and associate
                 users with specific roles.

           4.    Sites, or sub-sites, newly added to the site list will automatically be added to user site
                 list privileges and/or Alarm Stations site lists, if desired.

           5.    Alarm Station Management, to add/edit/delete Alarm Station(s), central stations for
                 processing alarms from multiple DVRs, and to setup an Alarm Station’s network
                 connections.

           6.    Default streams selection for live Alarm sessions, allowing user selection of the
                 streams the DVR will transmit by default during a live Alarm session.

           7.    Automated Tour Setup (Tours of multiple DVRs), to add/edit/delete tours of multiple
                 sites in the system. The duration that the tour spends at each site must be individually
                 editable.

     I.    View Workstation shall provide the following operator functions:

           1.    Configuration (Maintenance sessions). An operator (with Administrator privileges)
                 shall have the option to configure DVRs remotely. The following configurations shall
                 be possible:

                 a.         Recording Configuration, to optimize the system’s boosted and event recording
                            capabilities (resolution, frame rate and quality), providing maximum flexibility for


                                               282300-7
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder               Guide Specifications in CSI Format

www.honeywellvideo.com                                                                      800-09836 Rev B



                            Response recording rules. DVRs must be able to automatically increase the
                            recording settings upon initiation of a Response rule or Boosted recording
                            event.

                 b.         Continuous Recording Configuration, to specify the settings (resolution, frame
                            rate and quality) for the traditional time-lapse recording mode, extending the
                            video archive when the system is not using boosted or response recording
                            settings.

                 c.         Event driven Response recording, featuring sixty-four (64) user-definable
                            Response rules to provide total adaptability in programming a comprehensive
                            event-driven digital recording solution. Multiple recording Triggers can be
                            combined with multiple responses, with the option of adding schedules for very
                            flexible Response Rule options.

                 d.         Motion detection configuration, to specify areas of video to monitor for motion,
                            and then motion can trigger event recording, send alarms, and/or be logged for
                            later reviewing. Smart video motion detection (VMD) is an intelligent motion
                            detection module that uses video analytics technology to provide more reliable
                            motion detection, while significantly reducing false alarms that can arise from
                            pixel-based video motion detection.

                 e.         Remotely programming IP and/or analog PTZ domes from within a
                            Maintenance session, without the need for an external dome controller.
                            Includes advanced configuration and programming of PTZ domes with
                            Honeywell’s Maxpro protocols, seven (7) other industry leading protocols, or
                            fifty (50) other PTZ protocols using Bossware.

                 f.         Automatic discovery of supported IP cameras currently powered and connected
                            to the local area network (LAN) where the DVR is installed. Auto-discovery of
                            IP cameras makes assigning and configuring IP cameras easy and intuitive.

                 g.         Camera Configuration, to add/edit/delete cameras and camera settings. The
                            configuration settings must include: color or black and white, brightness,
                            contrast, hue, saturation, and motion detection options.

                 h.         Monitor Configuration, to add/edit/delete monitors and customize the
                            sequencing of video for the public display spot monitors.

                 i.         Capability to view a DVR’s storage statistics (including, but not limited to:
                            nominal storage capacity, average daily usage, amount of time since DVR
                            configuration or reboot, and the devices connected to the DVR).

                 j.         Device Configuration, to configure up to eight (8) user-programmable serial
                            ports for connecting PTZ, POS, PIT, and/or SMARTPIT devices.

                 k.         Near instantaneous configuration updating after initial setup is established.
                            Little to no downtime needed (such as system resets) to make configuration


                                              282300-8
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder                Guide Specifications in CSI Format

www.honeywellvideo.com                                                                        800-09836 Rev B



                            changes effective, after initial setup has been established. The exception is that
                            the system will need to reset when cameras types are switched from analog to
                            IP, or from IP to analog.

           2.    Viewer (Live and Retrieval sessions). The operator shall have the option to view live
                 or recorded video from a connected DVR. The following functions shall be possible:

                 a.         Dynamically moving, sizing, and tiling individual camera and/or text windows,
                            either during a live or retrieval session. The viewing window must be
                            detachable and scalable without preset limitations.

                 b.         Main video viewing screen capable of showing one to sixteen (1-16) streams of
                            live or recorded video along with up to sixteen (16) streams of POS data. Live
                            video displays at faster update rates for smoother motion in any combination of
                            cameras.

                 c.         Capability of enabling accelerated recording rates, while viewing live video, for
                            five (5) minutes (default) with a single-click Boost button.

                 d.         Vector driven control of multiple PTZ cameras (analog, digital and/or IP).
                            Control to include pan/tilt speeds, zoom control, iris control, focus control,
                            preset programming, and preset calling.

                 e.         Exporting user selected images and/or video clips to appropriate media for
                            evidence distribution. Archived clips must allow the user to view portions of
                            video without having to connect to a DVR, retrieve video for reviewing at a later
                            time, and store and/or copy video onto other computers. Clips must be capable
                            of being archived by specifying the From and To times for fastest possible clip
                            creation, without the need to sit and watch, or fast-forward through the
                            archiving video.

                 f.         Separate clip-viewing software that can play back evidence clips on Microsoft
                            Windows-based PCs that are not part of the Rapid Eye system (for easy
                            evidence distribution) must be available on the manufacturer’s website.

                 g.         Capability of receiving and processing alarms/events automatically from
                            multiple DVRs, either by LAN/WAN, dial-up, or both. The View operators must
                            have the ability to receive, view, acknowledge, and rearm alarms.

                 h.         Automatic sending of alarm emails to specified recipients lets stakeholders
                            keep notified of events and problems at multiple facilities in a timely manner.

                 i.         Digitally zoom in on either a live or recorded video feed to aid the analyzing of
                            distant objects in the image. Digital zooming does not increase the resolution or
                            quality of a video image, but zooms in on video, increasing the size of the
                            objects displayed in the image.

                 j.         Video Smoothing significantly improves the display of enlarged video images
                            on the PC monitor with a single-click Smooth Video button.

                                               282300-9
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder                Guide Specifications in CSI Format

www.honeywellvideo.com                                                                        800-09836 Rev B



                 k.         Freezing live video on the actively selected camera with a single-click Freeze
                            button. Freeze live video for further video scrutiny without the need to start a
                            retrieval session, and without affecting other live cameras, recording settings,
                            or the video that is recorded.

                 l.         Capability to monitor and/or search up to sixteen (16) streams of POS or ATM
                            generated data (such as from cash registers, door access sensors, and guest
                            registration systems). Operators must have the ability to search for specific
                            strings of text (such as “No Sale”), and be able to either view video from the
                            time of the event, to print the event details, or save the details to a *.txt file.

           3.    Search sessions. The Search facility shall include the following search functions:

                 a.         Event searching, to search recorded events for specific instances of video,
                            such as from boosted recording, date and time of the event, and event type.
                            Benefits in helping to find boosted or event-driven recording quickly.

                 b.         Configuring and running searches for motion in recorded video. Motion
                            searches must be editable by the specified time/date, including or excluding
                            areas of video, and by the motion threshold (sensitivity).

           4.    Reports: The Report facility shall include event history and event log reports.

2.4   RAPID EYE INTEGRATIONS

      A.   The following IP Cameras are compatible with the DVR:
                                       ®
           1.    Honeywell equIP V2 IP cameras:

                 a.         equIP HCD554IP

                 b.         equIP HD4DIP

                 c.         equIP HD3MDIP

                 d.         equIP HD4MDIP
                                       ®
           2.    Honeywell equIP H.264 IP cameras:

                 a.         equIP HD3MDIH

                 b.         equIP HD4MDIH

                 c.         equIP HCD5MIH
                                       ®
           3.    Honeywell equIP 1080P IP cameras:

                 a.         equIP HD3HDIH

                 b.         equIP HD4HDIH


                                              282300-10
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder             Guide Specifications in CSI Format

www.honeywellvideo.com                                                                  800-09836 Rev B



                 c.         equIP HCD5HIH
                                      ®
           4.    Honeywell equIP Wide Dynamic Range IP cameras:

                 a.         equIP HD3MWIH

                 b.         equIP HD4MWIH

                 c.         equIP HCD5WIH

           5.    Honeywell Performance IP cameras:

                 a.         HD44IP

                 b.         HD45IP

                 c.         HD54IP

                 d.         HD55IP
                                      ®              TM
           6.    Honeywell equIP Series ACUIX             IP PTZ dome

           7.    Third-party ONVIF compliant IP cameras

     B.    Video Management:

           1.    Honeywell MAXPRO VMS (Video Management System)

           2.    Honeywell Digital Video Manager (DVM) enterprise IP-based video system

           3.    Honeywell Rapid Eye Reports, automation and reporting software solution

     C.    Video Analytics:

           1.    Honeywell Active Alert

     D.    Data Management Utility/Devices:

           1.    Honeywell Integrated Data Manager (IDM)

           2.    Honeywell SmartPIT

           3.    Honeywell Vista Alarm Panels

     E.    Traditional Physical Alarm Devices

     F.    Electronic Access Control Systems:

           1.    Honeywell Pro-Watch Release 3.8 or later

           2.    Honeywell WIN-PAK SE/PE/CS with Vista integration



                                             282300-11
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder            Guide Specifications in CSI Format

www.honeywellvideo.com                                                                 800-09836 Rev B



           3.    Honeywell NStar Access Control System

           4.    Honeywell NetAXS web-based Access Control System

2.5   SYSTEM HARDWARE

      A.   Rapid Eye Hybrid HD Digital Video Recording (DVR) and Transmission System shall
           operate with no performance degradation using the following standard hardware:

           1.    Operating System: Linux

           2.    Optical Drive: Optional DVD-RW

           3.    USB 2.0 Ports: 6 total (2 in front panel, 4 in rear panel)

           4.    Hard Disk Drives: One hard drive standard, expandable to 4 field-upgradeable hard
                 drive bays total.

                 a.         One standard hard drive: 500 GB or 1 TB

                 b.         Expandable to a maximum of 4 TB (3 TB max for units with Video Analytics)

           5.    Network Interface Card (NIC): 10/100 base T Ethernet, standard RJ45 interface

           6.    Human Interface: 102-key keyboard and a mouse pointing device

           7.    Graphics Adapter: 24-bit true color, video resolution 1024x768 pixels (LocalView
                 interface)

           8.    Admin Database: Microsoft SQL Server, Microsoft Access or MSDE

           9.    Recording and Transmission Compression Algorithm: Modified H.261/263 (REM
                 proprietary)

           10.   Recording Rate (IPS): 480/400 CIF global (NTSC/PAL), or 120/100 CIF global
                 (NTSC/PAL)

           11.   Dimensions (W x H x D): 17.28” x 5.23” x 20.85” (440 mm x 133 mm x 530 mm)

           12.   Weight: 43 lb (19.5 kg)

      B.   Remote Workstation requirements (for running Admin and/or View software). An IBM-
           compatible PC workstation shall operate with no performance degradation using the
           following minimum hardware and operating system configuration:

           1.    Processor: 2.4 GHz Dual Core processor or above

           2.    System Memory (RAM): 4 GB

           3.    Optical Drive: CD-ROM for installation and upgrades



                                             282300-12
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder            Guide Specifications in CSI Format

www.honeywellvideo.com                                                                   800-09836 Rev B



           4.    Hard Disk Drives: Minimum 200 MB of free hard disk space, plus adequate space for
                 storing video clips.

           5.    Network Interface Card (NIC): 1 Gbps

           6.    Human Interface: 102-key keyboard and a mouse pointing device

           7.    Video Card(s) and Monitor(s): Minimum support for XGA mode (1280 x 1024) or
                 SVGA mode (800 x 600)

           8.    Operating System: Microsoft Windows 7, Windows XP, or Windows 2000

2.6   MANUFACTURER SUPPORT

      A.   Manufacturer shall provide customer service, pre-sales applications assistance, after-sales
           technical assistance, access to online technical support, and online training using Web
           conferencing.

      B.   Manufacturer shall provide 24/7 technical assistance and support by means of a toll-free
           telephone number at no extra charge.



PART 3 EXECUTION

3.1   EXAMINATION

      A.   Examine site conditions prior to installation. Notify Architect and Owner in writing if
           unsuitable conditions are encountered. Do not start installation until site conditions are
           acceptable.

3.2   INSTALLATION

      A.   Test all components before shipping to the project location.

      B.   Digital Video Recording (DVR) and Transmission System shall be installed, programmed
           and tested in accordance with manufacturer’s installation instructions.

           1.    Coordinate interfaces with Owner’s representative where appropriate.

           2.    Provide backboxes, racks, connectors, supports, conduit, cable, and wire for a
                 complete and reliable installation. Obtain Owner’s approval for exact location of all
                 boxes, conduit, and wiring runs prior to installation.

           3.    Install conduit, cable, and wire parallel and square with building lines, including raised
                 floor areas. Do not exceed forty (40) percent fill in conduits. Gather wires and tie to
                 create an orderly installation.

           4.    Coordinate with other trades to provide proper sequencing of installation.

3.3   FIELD COMMISSIONING AND CERTIFICATION

                                             282300-13
                      TM
Honeywell Rapid Eye        Hybrid HD Digital Video Recorder           Guide Specifications in CSI Format

www.honeywellvideo.com                                                                 800-09836 Rev B



      A.   Field Commissioning: Test Digital Video Recording (DVR) and Transmission System as
           recommended by manufacturer, including the following:

           1.    Conduct complete inspection and testing of equipment, including verification of
                 operation with connected equipment.

           2.    Test devices and demonstrate operational features for Owner’s representative and
                 authorities having jurisdiction, as applicable. All testing must be witnessed by the
                 Owner’s representative, prior to acceptance.

           3.    Correct deficiencies until satisfactory results are obtained.

           4.    Submit written copies of test results.

3.4   TRAINING

      A.   Conduct on-site system administrator and security/surveillance operator training, with the
           number of sessions and length of sessions as recommended by the Digital Video Recording
           (DVR) and Transmission System manufacturer. Training shall include, but not limited to DVR
           administration, configuration, operation and diagnostics.



                                         END OF SECTION




                                             282300-14

								
To top