Docstoc

The Most Suitable Approaches to Seal Duct Work in your Greensboro NC Home to Reduce Your Household Utility Bills

Document Sample
The Most Suitable Approaches to Seal Duct Work in your Greensboro NC Home to Reduce Your Household Utility Bills Powered By Docstoc
					The Most Suitable Approaches to Seal Duct Work in your Greensboro NC Home to Reduce Your
Household Utility Bills
Air ducts in the home leak due to methods they are composed. Because of the short lengths of their
manufacturing, there's probability of a range of leaks with the entire heating and cooling system. Air will be
able to leak both in and out of the system, allowing the HVAC unit to operate harder than it is required to,
wasting hard-earned money each month in power bills. If a person has rooms that happen to be warmer or
cooler compared to the rest, this is usually a good indication that an individual has leaky duct work. New
homes are certainly not necessarily clear of the troubles of badly sealed duct work. Heating and Air
Greensboro NC would like to furnish this information to its current customers and to the consumers of
Greensboro NC.


In most cases, about 30 % of a house's heated or cooled air leaks out of your duct work. This means that,
properly sealing these leaks conserves quite a bit of money month-to-month. Additionally, with such leaks
successfully closed, it's going to reduce dust and debris that enters the air, boosting the complete air quality
of the home too. It is an easy fix for these leaks, but usually requires some time, for the standard home has
approximately 180 ft of duct work. In the big picture, if everybody in the America was to seal their leaking
duct work, more than $5 billion in power costs will likely be retained a year. It happens to be an excellent
way to boost the effects of burning fossil fuels to create electric energy and the side effects on the
environment.


A lot of duct work is sealed with duct tape, but this might be the least productive material to use. Mastic tape
is actually a superior alternative option to use to seal cracks and leaks. Mastic tape is waterproof, flexible
and dries as a rubbery stretchy material. It can expand and contract as the duct work expands and contracts
with temperature changes. It is appropriate on metal, fiberglass and flexible duct work. It comes distributed
in caulking tubes, tubs and large buckets. It can be used with a brush, caulking gun, trowel or even by hand
(though one will want to wear a glove). One gallon can seal about 20 to 40 joints. The best type is the water
based with regards to clean up, while it does also comes in ail based forms also.


When it comes to working with mastic, be sure that the location is clean of any dust and dirt. One can use a
dry rag to dust it off. Make sure there aren't any missing screws and the present ones are screwed in tightly
and that any sections of duct work not fixed together are closed. Gaps of up to a quarter inch can be sealed
well. Put on the mastic a minimum of one inch around the break in a thick coat, around 1/16 of an inch
thick. If there's gaps greater than one quarter inch, make use of a fiberglass mesh tape to cover the space
initially. The mastic takes between 2 to 4 hours to dry. After, wrap the duct work with a effective fiberglass
insulation. Don't assume that the insulation that a person presently has on the duct work will be more than
enough to seal the air loss. If there is dirt streaks on the outside of the duct work, you will discover a duct
leak present. Simply take off the insulation and seal the gaps as described above. Heating and Air
Greensboro NC is available in order to assist with inquiries you may have using this procedure.


Heating and Air Greensboro NC

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:6/4/2012
language:
pages:1
Craig Kessler Craig Kessler http://
About