fgp sensors

							                     FGP SENSORS: French Leader specialised in Force, Torque, Acceleration,
                     Pressure, Instrumentation dedicated Sensors and Captors…Technical
                     assistance and support.

Worldwide French Leader in the sensor industry ranging from Force, Torque, Acceleration,

Pressure, and Instrumentation dedicated sensors and captors.


FGP Sensors offers wide range of products suitable for applications in the Automotive,

Aeronautics, Autosport, Offshore and Industrial sectors.


FGP Sensors provides technical assistance and support and is distinguished for manufacturing

custom-made sensors designed to meet any special requirements.


 A. Force

 A.1 General Purpose - Load ranges vary from 2 lbs. to 400,000 lbs. Both amplified and non-amplified
 versions are available depending on the model.

 FMT - Miniaturized      FSR from 0-4,000 lb to 0-64,000 lb
 Load Washer
                         Compression

                         Static and dynamic applications

                         Measures clamping and screwing forces

                          Rugged

 FN1010 - Pin for        FSR from 0-2,000 lb to 0-400,000 lb
 Heavy Loads
                         Tension/Compression

                         High coefficient of security

                         Output: mV or V
                       Optional: Water-proof

                       Optional: Bidirectional
FN2420 - Cylindrical   FSR from 0-4,000 lb to 0-1,000,000 lb
Load Cell for Very
                       Compression
Heavy Loads
                       Accuracy: 0.1%

                       Spherical cap

                       Mounting holes on base

                       Output: mV or V
FN3000 - Pancake       FSR from 0-2,000 lb to 0-200,000 lb
Load Cell for Heavy
                       Tension/Compression
Loads
                       Accuracy: 0.1%

                       Output: mV or V


FN3002 - Heavy         FSR from 0-2,000 lb to 0-400,000 lb
Loads - Small
                       Tension/Compression
Dimensions
                       Threaded male mechanical fitting

                       Output: mV or V

                       Numerous Options
FN3030 - General       Full Scale Range (FSR) from 0-10 lb to 0-20,000 lb
Purpose S-beam Load
                    Tension/Compression
Cell
                       Accuracy: 0.1%

                       Output: mV or V


FN3050 - General       FSR from 0-20 lb to 0-4,000 lb
Purpose Low Profile
                       Tension/Compression
Load Cell
                       Accuracy: 0.1%
                           Output: mV or V

                           Standard dimensions for all ranges
FN3148 - Very High         FSR from 0-2 lb to 0-400 lb
Accuracy Load Cell
                           Tension/Compression

                           Accuracy: 0.05%

                           Integrated Mechanical Stops

                           Output: mV or V
FN3280 - S-beam            FSR from 0-0.2 lb to 0-1 lb
Load Cell for Low
                           Tension/Compression
Ranges
                           Accuracy: 0.1%

                           Integrated mechanical stops
FN7110 - Double            FSR from 0-0.2/0-20 lb to 0-200/0-2,000 lb
Range Load Cell
                           Tension/Compression

                           Accuracy: 0.1%

                           Rugged

                           Integrated mechanical stops

                           Output: mV or V
A.2 Miniature - Miniature load cells designed for testing where space and weight are critical. These rugged
sensors can measure loads as small as 0-0.4 lbs to as much as 0-2000 lbs in static and dynamic applications.

XFC200R - High Over Full Scale Range (FSR) from 0-0.4 lb to 0-2,000 lb
range
                            Compression

                            High stiffness

                            Small diameter

                            Static and dynamic applications

XFC200R-Vi - High           High Accuracy and Stability
Performance
                            Temperature Range -40 to 120 °C [-40 to 248 °F]
Compression
                       High Level Analogue Output

                       Full Scale Ranges 0-0.4 lb to 0-2,000 lb

                       Compression

                       High Stiffness

                       Integrated Spherical Load Button
XFC205R - Low           FSR from 0-0.4 lb to 0-40 lb
Ranges
                       Compression

                       High stiffness

                       Diameter: 0.39" [10 mm]

                       Static and dynamic applications

                       M5 mounting stud
XFL205R -              FSR from 0-0.4 lb to 0-20 lb
Subminiature -
                       Compression
Diameter 0.2" [5 mm]
                       Thickness: 0.1" [2.5 mm]

                       Integrated spherical load button

                       Static and dynamic applications

XFL212R - Low          FSR from 0-1 lb to 0-100 lb
Profile - Diameter
                       Compression
0.5" [12.5 mm]
                       Thickness: 0.14" [3.5 mm]

                       Integrated spherical load button

                       Static and dynamic applications

XFL212R-Vi - High      High Accuracy and Stability
Performance
                       Temperature Range -40 to 120 °C [-40 to 248 °F]
Compression
                       High Level Analogue Output

                       Full Scale Ranges 0-1 lb to 0-100 lb
                        Compression Extremely Flat

XFL225D - Low           FSR from 0-2 lb to 0-1,000 lb
Profile - Diameter
                        Compression
0.98" [25 mm]
                        Static and dynamic applications

                        Optional: Load washer model

XFL225D-Vi - High       High Accuracy and Stability
Performance Load
                        Temperature Range -40 to 120 °C [-40 to 248 °F]
Washer
                        High Level Analogue Output

                        Full Scale Ranges 0-2 lb to 0-1,000 lb

                        Compression

                        Extremely Flat

                        Load Washer Model

XFTC300 - Low &         FSR from 0-0.4 lb to 0-400 lb
Medium Ranges -
                        Tension/Compression
Male/Male
Mechanical Fitting      Static and dynamic applications

                        Optional: High-level output with integrated amplifier

                        High overload capacity

XFTC300-Vi - High   High Accuracy and Stability
Performance
                    Temperature Range -40 to 120 °C [-40 to 248 °F]
Tension/Compression
                        High Level Analogue Output

                        Full Scale Ranges 0-0.4 lb to 0-400 lb

                        Tension/Compression

                        High Stiffness

                        Threaded Male Mechanical Fitting
XFTC301 - Medium        FSR from 0-100 lb to 0-2,000 lb
& High Ranges -
                        Tension/Compression
Male/Male
Mechanical Fitting      High stiffness

                        Static and dynamic applications

XFTC301-Vi - High   High Accuracy and Stability
Performance
                    Temperature Range -40 to 120 °C [-40 to 248 °F]
Tension/Compression
                        High Level Analogue Output

                        Full Scale Ranges 0-100 lb to 0-2,000 lb

                        Tension/Compression

                        High Stiffness

                        Threaded Male Mechanical Fitting

XFTC302 - For Heavy     FSR from 0-1,000 lb to 0-2,000 lb
Loads - High
                        Tension/Compression
Temperature
                        High stiffness

                        Static and dynamic applications

                        Male mechanical fitting



XFTC310 - Low &         FSR from 0-0.4 lb to 0-400 lb
Medium Ranges -
                        Tension/Compression
Male/Female
Mechanical Fitting      Static and dynamic applications

                        High overload capacity

                        Optional: High-level output with integrated amplifier



XFTC311 - Medium        FSR from 0-100 lb to 0-2,000 lb
& High Ranges -
Male/Female                 Tension/Compression
Mechanical Fitting
                            High stiffness

                            Static and dynamic applications

XFTC320 - Low &             FSR from 0-0.4 lb to 0-400 lb
Medium Ranges -
                            Tension/Compression
Female/Female
Mechanical Fitting          Static and dynamic applications

                            High overload capacity

                            Optional: High-level output with integrated amplifier

XFTC321 - Medium            FSR from 0-100 lb to 0-2,000 lb
& High Ranges -
                            Tension/Compression
Female/Female
Mechanical Fitting          High stiffness

                            Static and dynamic applications

XFTC322 - For Heavy         FSR from 0-1,000 lb to 0-2,000 lb
Loads - Threaded
                            Tension/Compression
Female Mechanical
Fitting                     High stiffness

                            Static and dynamic applications

                            High temperature ranges

XFU400 - Integrated         FSR from 0-100 lb to 0-1,000 lb
Bearings
                            Tension/Compression / High accuracy

                            Static and dynamic applications

A.3 Process / Industry - ideal for measuring strain during assembly. These sensors measure compression and
have load ranges from 20 lbs. to 11,200 lbs. (100 N to 50 kN) and are protected against accidental overloads.

FN2640 - Press-fit          Full Scale Range (FSR) from 0-20 lb to 0-10,000 lb
Load Cell
                            Compression
                             For static and dynamic applications

                             With spherical load button

                             High stiffness

FN9040 - Miniature           FSR from 0-200 lb to 0-20,000 lb
Press-Fit Load Cell
                             Compression with spherical load button

                             High natural frequency > 20 kHz

A.4 Fatigue rated load cell and Multiaxial Sensors - fatigue rated load cells engineered for fatigue
testing. These rugged sensors have a high stiffness with a fatigue life of millions of cycles; while multiaxial
sensor measures force on three axes as well as the three corresponding moments.

FN3042 - Pancake             FSR from 0-1,000 lb to 0-100,000 lb
Load Cell - High
                             Tension/Compression
Ranges
                             High stiffness (millions of cycles)

                             Identical performance to static sensors

                             Dynamic applications

                             Output: mV or V

FN3060 - S-beam              Full Scale Range (FSR) from 0-50 lb to 0-500 lb
Load Cell - Fatigue
                             Tension/Compression
Testing
                             High accuracy

                             Very high stiffness

                             Dynamic applications

                             Output: mV or V

FN7325 - Multi-axial         FSR from 0-1,000 lb to 0-50,000 lb
load cell
                             Measures tri-directional stress

                             Multiple components mode

                             Minimal cross effects
                                  Optional high-level output

B. Torque

B.1 Rotary Torque Sensors - Our rotary torque sensors are protected against the effects of high intensity
electromagnetic fields and are ideal for testing rotation speeds up to 37,000 rpm.

CD1050 - Square                   FSR from 0-4 lb-ft to 0-5600 lb-ft
Male Coupling
                                  Static and dynamic applications

                                  Square male couplings

                                  Output: mV or V

CD1095 - Keyed Shaft FSR from 0-4 lb-ft to 0-2,000 lb-ft
Mechanical
                     Static and dynamic applications
Connection
                                  3,000 rpm max.

                                  Output: mV or V

CD1110 - Low Speed                FSR from 0-0.04 lb-ft to 0-1.6 lb-ft
Torque
                                  Static and dynamic applications
Measurements
                                  2,000 rpm

                                  Integrated mechanical stops

                                  Output: mV or V

CD1140 - Contact less             Full Scale Range (FSR) from 0-0.04 lb-ft to 0-16,000 lb-ft

                                  High accuracy

                                  Small outline

                                  Low moment of inertia

                                  Speed or Angle Detection (Optional)



B.2 Reaction Torque Sensors - High accuracy non-rotation reaction torque sensors use metal foil strain gauges to minimize the effects of
high temperature on data.
CS1060 - Square Male       FSR from 0-4 lb-ft to 0-5,600 lb-ft
Mechanical
                           Static and dynamic applications
Connection
                           Output: mV or V

CS1120 - Keyed Shaft       Full Scale Range (FSR) 0-4 lb-ft to 0-2,000 lb-ft
Mechanical
                           Static and dynamic applications
Connection
                           Keyed shaft mechanical connection

                           Optional high-level output (depending on FSR)

CS1210 - End Shield        FSR from 0-128 lb-ft to 0-8,000 lb-ft
Mechanical Fittings
                           Static and dynamic applications

                           High transverse stiffness

                           Output: mV or V

B.3 Multifunctional sensors – Sensors that also measure angle and/or speed of rotation in addition to
Torque.

FCA7330 -                  Full Scale Range (FSR) of 0-20 Nm to 0-2,500 Nm
Torque/Angle/Speed         Static and dynamic applications
Sensor
                           Keyed shaft mechanical fitting

                           Angle detection
FCB7013 - Double           Double range of 0-200 lb-ft and 0-4,000 lb-ft
Range Reaction             Integrated mechanical stops for the low FSR
Torque Sensor

FNC7201 - Force &          FSR of 0-14,000 lb and 0-175 lb-ft
Torque Sensor              Static and dynamic applications




FNC7224 - Force &          FSR of 0-12,000 lb and 0-40 lb-ft
Torque Sensor              High accuracy
C. Acceleration

C.1 Industrial testing - lightweight accelerometers are ideal for continuous measurements of acceleration,
shock, and low frequency vibration. Built-in critical air damping and mechanical stops provide excellent over
range protection with minimal changes in damping as a function of temperature.

FA101 - General             Full Scale Range (FSR) from ±2g to ±500g
Purpose
                            Bandwidth from DC

                            Air damped

                            Integrated mechanical stops

                            Individual frequency response data sheet

                            Low cost

FA108 - Light               FSR from ±2g to ±500g
Weight - Mounting           Temperature compensated
Bracket
                            Weight without cable: 6 grams

                            Bandwidth from DC

                            Air damped

                            Integrated mechanical stops

                            Individual frequency response data sheet



FA1101-A9 -                 FSR from ±2g to ±500g
Differential Output         Rugged

                            Bandwidth from DC

                            Over-range stops

                            High level differential output available

FA1403 - High Level FSR from ±2g à ±500g
Output                      Bandwidth from DC

                            Over-range stops
                            High level output

                            23 mm [0.906"] cube design

                            Triaxial model available

XA1520 - Industrial,        FSR from ±5g to ±2000g
High level output           Industrial, damped

                            Dynamic and steady state response

                            Stops prevent over-ranging up to 10 000g

                            High level output model

                            20 mm cube design



C.2 Miniature - miniature size and lightweight of our accelerometers allow testing where space and weight are
often critical. Built-in critical air damping and mechanical stops provide excellent over-range protection with
minimal changes in damping as a function of temperature. Amplified versions are available for certain models.

FA1105 - Light              FSR from ±2g to ±500g
Weight - M5 Thread          Small footprint

                            Lightweight and rugged: <8 grams

                            Bandwidth from DC

                            Over-range stops

                            M5 Thread for easy mounting

                            Built-in amplifier



FA1131 - Extreme            FSR from ±50g to ±500g
small footprint             Extremely small footprint

                            Weighs less than 3 grams

                            Bandwidth from DC

                            Built-in critical air damping
                      Solid state reliability

FA1144 - Built-in     FSR from ±50g to ±500g
amplifier available   20x20 mm [0.79"] cube

                      Bandwith from DC

                      Air damped

                      Integrated mechanical stops

                      High phase shift stability

                      Built-in amplifier available

FA1320 - Crash        FSR from ±50g to ±500g
studies               Crash studies

                      Bandwidth from DC

                      Built-in critical air damping

                      Compact and rugged design

                      Solid state reliability

XA1000 - Ultra-       FSR from ±5g to ±2000g
Miniature             Ultra-Miniature, damped

                      Dynamic and steady state response

                      Weight 1 gram

                      Stops prevent over-ranging up to 10 000g

XA1010 - Sub-         FSR from ±5g to ±2000g
Miniature             Sub-Miniature, damped

                      Dynamic and steady state response

                      Weight 1.5 grams

                      Stops prevent over-ranging up to 10 000g

XA1020 – Miniature    FSR from ±5g to ±2000g

                      Miniature, damped
                            Dynamic and steady state response

                            Weight 4 grams

                            Stops prevent over-ranging up to 10 000g

XA1299 - Crash-test         FSR from ±50g to ±3000g
Accelerometer               Miniature, damped

                            Ideal for Crash-Testing

                            Bandwidth from DC

                            Weight ~5 grams

                            Over-range stops / Meets ISO 6487

XA1516 - Miniature,         FSR from ±5g to ±2000g
High level output           Miniature, damped

                            Dynamic and steady state response

                            Stops prevent over-ranging up to 10 000g

                            High level output model

                            16 mm cube design

C.3 Multiaxial - Accelerometers designed to measure simultaneously two or three axes with a different range
in each. Built-in critical air damping and mechanical stops provide excellent over-range protection with minimal
changes in damping as a function of temperature.

FA3106 - Triaxial -         Full Scale Range (FSR) from ±2g to ±500g
General Purpose             Bandwith from DC

                            Air damped

                            Integrated mechanical stops

FA3403 - Triaxial -         FSR from ±2g to ±500g
Differential output         Selectable operating range for each axis

                            Weighs <30 grams

                            Bandwidth from DC
                            Integrated mechanical stops

                            High level differential output available

FA3650 - Triaxial -         FSR from ±50g to ±500g
Cube design                 Selectable operating range for each axis

                            25 x 25 mm [0.98"] cube design

                            Bandwidth from DC

                            Built-in critical air damping

                            Integrated over-range stops



D Pressure Miniature - Installation tightening torque effects are one of the most common causes of pressure
sensor failure. In response, FGPSensors has developed SanShift™ Technology. By allowing up to 10 times the
additional installation torque, SanShift™ Technology provides immediate long-term performance improvements.
Models are available in titanium to withstand severe testing environments and with a flush diaphragm to prevent
pressure port obstruction.

XPCM10 - High               FSR from 0-150 psi to 0-5,000 psi
Temperature, M10            Operating temperature up to 428 °F
mounting stud
                            Insensitive to tightening torque

                            For static and dynamic applications

XPM10 - High                FSR from 0-15 psi to 0-5,000 psi
Accuracy, M10               Accurate to ±0,15%
mounting stud
                            Insensitive to tightening torque

                            High natural frequency

XPM10-Vi - High             High Accuracy and Stability
Performance, M10            Temperature Range -40 to 120 °C [-40 to 248 °F]
mounting stud
                            High Level Analogue Output

                            Full Scale Ranges 0-15 psi to 0-5,000 psi

                            Flush Diaphragm, All-Titanium
                  Low Installation Torque Sensitivity

                  M10 Threading

XPM4 - All        Full Scale Range(FSR) from 0-75psi to 0-3000psi
Titanium, M4      All titanium construction &
mounting stud
                  Insensitive to tightening torque

                  High natural frequency

XPM4-Vi - High    High Accuracy and Stability
Performance, M4   Temperature Range -40 to 120 °C [-40 to 248 °F]
mounting stud
                  High Level Analogue Output

                  Full Scale Ranges 0-75 psi to 0-3,000 psi

                  Flush Diaphragm, All-Titanium

                  Low Installation Torque Sensitivity

XPM5 - All        FSR from 0-30 psi to 0-5,000 psi
Titanium, M5      All titanium construction
mounting stud
                  Insensitive to tightening torque

                  High natural frequency

XPM5-Vi - High    High Accuracy and Stability
Performance, M5   Temperature Range -40 to 120 °C [-40 to 248 °F]
mounting stud
                  High Level Analogue Output

                  Full Scale Ranges 0-30 psi to 0-5,000 psi

                  Flush Diaphragm, All-Titanium

                  Low Installation Torque Sensitivity

                  M5 Threading

XPM6 - High       FSR from 0-1,500 psi to 0-15,000 psi
Pressure, M6      Suited for harsh environments
mounting stud
                  Flash temperature proved
                       Insensitive to tightening torque

XPM6-Vi - High         High Accuracy and Stability
Performance, M6        Temperature Range -40 to 120 °C [-40 to 248 °F]
mounting stud
                       High Level Analogue Output

                       Full Scale Ranges 0-1,500 psi to 0-15,000 psi

                       Flush Diaphragm, All-Titanium

                       Low Installation Torque Sensitivity

                       M6 Threading

XPR30 - Highly         FSR from 0-75 psi to 0-1,500 psi
media compatible, 9    All titanium construction
mm length
                       0.12" [3 mm] diameter

                       High natural frequency

XPR36 - Highly         FSR from 0-30 psi to 0-1,500 psi
media compatible, 10   All titanium construction
mm length
                       0.14" [3.6 mm] diameter

                       High natural frequency

E. Instrumentation

E.1 Amplifiers

ARD150/151 - DIN       Suited for Wheatstone bridge sensors
Rail Amplifier         Amplified current output 0/4...20 mA or

                       Analogue output ±10 V

                       DIN TS35 Rail Compatible

BE305 - In-Line        Amplifies Wheatstone bridge sensors
Current Amplifier      Power supply 12 to 36 Vdc

                       Currrent output 4...20 mA (current loop)
                        Zero and gain adjustments by trimmers

                        Connector or cable output

XAM - In-Line           Suited for Wheatstone bridge sensors
Voltage Amplifier       Unipolar or Bipolar Supply/ Output

                        Zero adjust potentiometer

                        Gain adjust trimmer

                        Connector and / or sealed cable output

XAM-IC - In-Line        Suited for Wheatstone bridge sensors
Current Amplifier       Power Supply 10 to 36 V

                        Zero and gain adjustments by trimmers

                        Connector and / or sealed cable output



XAM420 - In-Line        In-Line amplifier in aluminium case
Voltage Amplifier       Power supply 12 to 36 Vdc

                        Current output 4...20 mA (current loop)

                        Zero and gain adjust trimmers

                        Connector and / or sealed cable output



E.2 Signal Conditioning / Meters

Alpha-C -               Suited for strain gauge type sensors
Programmable            Compact housing
conditioner/displayer
                        Front panel programming

                        4 input ranges

                        Signal filtering

                        Optional RS232
 M210 - Multiple          Analog output of ±10 V
 entry                    Red LED Display: LED 2,000 counts
 conditioner/displayer
                          High bandwidth

                          Low noise Level

 MMP210 - Multiple        Display LED 5,000 points / Analog output of ±10V
 entry conditioner        High bandwidth / Low noise
 displayer, fast
 response                 TARE function and positive Peak function

                          RS232/RS485 interface (4 wires)




FGP Sensors also offers its Clients custom-made sensors uniquely designed, tested and

manufactured for special application. The engineers at FGP Sensors are actively involved in all

stages of the projects, offering quick responses to any clarification or problem the Clients might

encounter.


FGP Sensors maintains a large stock of all products and efficiently ship our products to

worldwide destinations.