downloads_transmitter_manual_34ST9923 by bagoesmhd

VIEWS: 19 PAGES: 8

									        ST 3000 FF Transmitter,                                                              34-ST-99-23
        With FOUNDATIONTM Fieldbus Option                                                                 06/03

        Installation & Device Reference                                               Addendum
        Guide                                                                   (to Installation &
        Transmitter Models:
                                                                               Device Reference
                                                                                            Guide
        STD110, STD120, STD130, STD170, STD924,
        STD930, STD974                                                                   34-ST-25-15B)


        Overview         Replacement Meterbody and Heads

                         The ST 3000 Pressure Transmitter, Models:
                           ·      STD110, STD120, STD130, STD170, and STD974
                           ·      STD924 and STD930 with Tantalum and Monel diaphragms
                         is now being shipped with newly designed meter body and process heads. If a
                         replacement meter body is needed, it should be ordered from the Model Number stated
                         on the meter body nameplate. This meter body replacement number will start with
                         STD110S-xxx...
                         This new transmitter is functionally identical to previous models in that the working
                         ranges (Lower Range Limit to Upper Range Limit) and intended applications have not
                         changed. However, the specifications for the maximum Pressure Rating and for the
                         Overpressure Rating have been enhanced in all models except the draft range
                         transmitter. A summary of specifications is given in Table 7.
                         The new versions, which will continue as Models STD110, STD120, STD130,
                         STD170, STD924, STD930, and STD974, differ only in the physical size and form of
                         the meter body, process head, and associated components.
                         With exceptions noted in this addendum, information given in User’s Manual
                         34-ST-25-15B applies also to this newer design.
                         Installation, operation, maintenance, calibration, and troubleshooting tasks remain
                         virtually the same as for the previous version. Differences appear primarily in torque
                         specifications when replacing meter bodies, and in part numbering and part
                         recognition when replacing components or assemblies.
        Related          This addendum provides details for parts replacement that span a variety of
        Publications     applications of the Models STD110, STD120, STD130, STD170, STD924, STD930,
                         and STD974.
                               For Series 100 Models        ST 3000 Smart Pressure Transmitter
                                                            Series 100 Differential Pressure Models
                                                            Specification and Model Selection Guide
                                                            34-ST-03-60
                               For Series 900 Models        ST 3000 Smart Pressure Transmitter
                                                            Series 900 Differential Pressure Models
                                                            Specification and Model Selection Guide
                                                            34-ST-03-65




06/03                          34-ST-99-23 (Addendum to 33-ST-25-15B)                                 1 of 8
Additions to the          The additions to User Manual 34-ST-25-15B that relate to the newly designed meter
User Manual               body and process heads are given in Table 1 of this addendum.

                          Use the information in Table 1 to reference and annotate your User Manual.
                          Table 1 Additions to the User Manual

         Page # in User           Sub-Section                               Description of Change
            Manual

              25          4.2 Considerations for ST 3000     The Maximum Working Pressure Rating and the
                          FF Transmitter                     Overpressure Rating has been enhanced for all
                                                             models included in this addendum except for the
                          Table 6 Transmitter                draft range transmitter.
                          Overpressure Ratings
                                                             For more information, refer to Table 7.

              43          4.3 Piping ST3000 Transmitter      In Step 5, do not use the torque specification of 47.5
                                                             to 54 N-m (35 to 40 lb-ft).
                          Table 15 Installing Flange
                          Adapter                            Instead, torque Flange Adapter bolts evenly to
                                                             47,5 N·m +/- 2,4 N·m (35 Lb-Ft +/- 1.8 Lb-Ft).



              147         9.3 Inspecting and Cleaning        In Step 8, do not use specifications for head bolt
                          Barrier Diaphragms                 torque given in Table 66.

                          Table 65 Process Head Bolt         Instead, torque head bolts/nuts to the specifications
                          Torque Ratings                     given in Table 2 of this addendum.



            154-157       9.5 Replacing Meter Body           In Step 9, apply torque to head bolts/nuts as
                                                             specified in Table 2 of this addendum.
                          Table 68 Replacing Meter Body
                          Only



            202-204       12.1 Replacement Parts            Figure 36 illustrates and Table 94 lists the
                                                            replacement parts available for the previous design of
                          Figure 36 and Table 94            the Transmitter.

                                                            For the newer design, use Figure 1 of this addendum
                                                            to locate replacement parts, and use Table 3 of this
                                                            addendum for part numbers and descriptions.

                                                            For applicability of parts, refer to:

                                                               ST 3000 Smart Transmitter
                                                               Series 100 Differential Pressure Models
                                                               Specification and Model Selection Guide
                                                               34-ST-03-60.

              218         3.2 Reference Drawings             The numbers of dimension drawings for the
                                                             transmitter models of Revision S and greater is
                          Table 105 Dimension drawings-      given in Table 6 of this addendum.
                          Series 100 and Series 900




2 of 8                             34-ST-99-23 (Addendum to 33-ST-25-15B)                                    06/03
        Table 2 Torque Table - Process Head Bolts/Nuts

                                                                       Bolt Type

        Meterbody Type              51452557-001              5142557-002 and -003         51452557-004
                                                              (NACE and Non-NACE           (B7M Alloy Steel)
                                    (Carbon Steel)            Stainless Steel)

        51451864XXXX, NOT           67,8 N•M +/- 3,4 N•M      56,9 N•M +/- 2,8 N•M         48,8 N•M +/- 2,4 N•M
        XX5
        (All Transmitter except     (50.0 Lb-Ft +/- 2.5 Lb-   (42.0 Lb-Ft +/- 2.1 Lb-Ft)   (36.0 Lb-Ft +/- 1.8 Lb-Ft)
        Draft Range)                Ft)

        51451864XX5                 20,3 N•M +/- 1,0 N•M      20,3 N•M +/- 1,0 N•M         20,3 N•M +/- 1,0 N•M
        (Draft Range Transmitter
        only)                       (15.0 Lb-Ft +/- 0.8 Lb-   (15.0 Lb-Ft +/- 0.8 Lb-Ft)   (15.0 Lb-Ft +/- 0.8 Lb-Ft)
                                    Ft)




         Figure 1 ST 3000 Model STD110 (Revision S or greater)




06/03                              34-ST-99-23 (Addendum to 33-ST-25-15B)                                   3 of 8
  Table 3 Parts Identification for Callouts in Figure 1

  Key    Part Number                                                                    Description                                                       Qty/
  No.                                                                                                                                                     Unit
    1    Specify complete                    Series 100 replacement meter body without heads                                                                1
         model number from
         nameplate plus R300
         Specify complete                    Series 900 replacement meter body without heads                                                                1
         model number from
         nameplate plus R300
         51452866-001                        Bolts and Nuts Kit, Carbon Steel
         51452866-002                        Bolts A286 SS (NACE) and Nuts, 304 SS (NACE) Kit
         51452866-003                        Bolts 316 SS (non-NACE) and Nuts 304 SS (NACE) Kit
         51452866-004                        Bolts B7M and Nuts 7M Kit
                                              Each Bolts and Nuts Kit includes:
   Kc    ································      Bolt, Hex head, 7/16-20 UNF, 1.50 Inches long (Flange Adapter)········                                       4
   K4    ································      Nut, Hex, 7/16 UNC (Process Head)····················································                        4
   K8                                          Bolt, Hex Head, 7/16 UNC X 3.25 inches long (Process Head)············                                       4
         ································

         30753785-001                        Drain and Plug Kit, stainless steel
         30753787-001                        Drain and Plug Kit, Monel
         30753786-001                        Drain and Plug Kit, Hastelloy C
                                              Each Drain and Plug Kit includes:
   K1    ································      Pipe Plug ····················································································               4
   K2    ································      Vent Plug ·····························································································      2
   K3    ································      Vent Bushing ·······················································································         2


         51452865-001                        Meterbody Gasket Kit (PTFE Material); Kit includes:
         51452865-002                        Meterbody Gasket Kit (Viton Material); Kit includes:
   K6    ·································     Gasket, Process Head ·········································································               6
   Ka    ·································     Gasket, Flange Adapter ·······································································               6
   K7    ·································     O-Ring, Meterbody to Electronics Housing ··········································                          3


   K6    51452868-001                         Gasket only, Process Head (12 PTFE Gaskets/pack)                                                             12
   K6    51452868-002                         Gasket only, Process Head (6 Viton Head O-Rings)                                                              6


   Ka    51452868-004                         Gasket only, Flange Adapter, 6 PTFE Adapter Gaskets                                                           6
   Ka    51452868-005                         Gasket only, Flange Adapter, 6 VITON Adapter O-Rings                                                          6




4 of 8                                        34-ST-99-23 (Addendum to 33-ST-25-15B)                                                                     06/03
 Table 4 Flange Adapter Kits

  Key         Part Number                                                        Description                                                Quantity
  No.                                                                                                                                       Per Unit
                                              Flange Adapter Kit, with:
        51452867-110                           SS Flange Adapters and with carbon steel bolts
        51452867-210                           SS Flange Adapters and with A286 SS (NACE) bolts
        51452867-310                           SS Flange Adapters and with 316 SS (non-NACE) bolts
        51452867-410                           SS Flange Adapters and with B7M alloy steel bolts


        51452867-150                           Monel Flange Adapters and with carbon steel bolts
        51452867-350                           Monel Flange Adapters and with 316 SS (non-NACE) bolts


        51452867-130                           Hastelloy C Flange Adapters and with carbon steel bolts
        51452867-330                           Hastelloy C Flange Adapters and with 316 SS (non-NACE) bolts


                                              Each Flange Adapter Kit includes:
   Ka   ···································    Gasket, Flange Adapter ································································         2
  Kb    ···································    Flange Adapter (1/2-inch NPT) ······················································            2
   Kc   ···································    Bolt, hex head, 7/16-20 UNF, 1.50 inches long, Flange Adapter ··                                4


                                              Flange Adapter Kit, with:
        51452867-100                           SS Blind Flange Adapter Kit, with Carbon Steel bolts
        51452867-200                           SS Blind Flange Adapter Kit, with A286 SS (NACE) bolts
        51452867-300                           SS Blind Flange Adapter Kit, with 316 SS (non-NACE) bolts
        51452867-400                           SS Blind Flange Adapters and B7M alloy steel bolts


                                              Blind Flange Adapter Kit includes:
   Ka   ···································    Gasket, Flange Adapter ································································         2
  Kb    ···································    Flange Adapter (blind) ···································································      2
   Kc   ···································    Bolt, hex head, 7/16-20 UNF, 1.50 inches long, Flange Adapter ··                                4




06/03                                         34-ST-99-23 (Addendum to 33-ST-25-15B)                                                         5 of 8
 Table 5 Process Head Assembly Kits
Key             Part Number                                                        Description                                                Quantity
No                                                                                                                                            Per Unit
                                               Process Head Assembly Kit, with PTFE Gasket and with:
         51452864-010                           Carbon steel head without side vent/drain
         51452864-012                           Carbon steel head with side vent/drain


         51452864-020                           Stainless steel head without side vent/drain
         51452864-022                           Stainless steel head with side vent/drain


         51452864-030                           Hastelloy C head without side vent/drain
         51452864-032                           Hastelloy C head with side vent/drain


         51452864-040                           Monel head without side vent/drain
         51452864-042                           Monel head with side vent/drain


                                               Process Head Assembly Kit, with VITON Gasket and with:
         51452864-110                           Carbon steel head without side vent/drain
         51452864-112                           Carbon steel head with side vent/drain


         51452864-120                           Stainless steel head without side vent/drain
         51452864-122                           Stainless steel head with side vent/drain


         51452864-130                           Hastelloy C head without side vent/drain
         51452864-132                           Hastelloy C head with side vent/drain


         51452864-140                           Monel head without side vent/drain
         51452864-142                           Monel head with side vent/drain


                                               Each Process head Assembly Kit includes:
 K1      ···································    Pipe Plug (See Note.)···································································         2
 K2      ···································    Vent Plug (See Note.)············· ·····················································         1
 K3      ···································    Vent Bushing (See Note.)·····························································            1
 K5      ···································    Process Head ··············································································      1
 K6                                                                                                                                              1
         ···································    Gasket (PTFE), Process Head ····················································
 Ka                                                                                                                                              1
         ···································    Gasket (PTFE), Flange Adapter···················································
                                                   NOTE: This item is made of the same material as the
                                                   Process Heads, except for Kits with carbon steel Process
                                                   Heads, which include stainless steel Pipe Plug, Vent Plug,
                                                   and Vent Bushing.




6 of 8                                          34-ST-99-23 (Addendum to 33-ST-25-15B)                                                           06/03
         Dimension             The following table provides references to dimension drawings for newly designed
         Drawings              ST 3000 Pressure Transmitters (Revision S and greater). If you need a copy of a drawing,
                               please determine the appropriate drawing number from the following table and contact your
                               Honeywell representative.



        Table 6 Dimension Drawings for Transmitter Models:
         STD110, STD120, STD130, STD170, STD924, STD930, STD974 (Revision S or Greater)

           Equipped with                       Angle Bracket                                    Flat Bracket

         A-G manifold part #         Vertical Pipe        Horizontal Pipe           Vertical Pipe        Horizontal Pipe

               (none)                 51452896               51452895                51452894                  51452893

               M4AV1                  51452886               51452888                51452890                  51452892

               M4TV1                  51452885               51452887                51452889                  51452891



          Table 7 Pressure Specification and Ratings Summary Comparisons

         Transmitter       Upper Range                     Maximum Working                    Overpressure Rating
         Model             Limit                            Pressure Rating                        (Note 1)
                                                                (Note 1)

                                                     Previous           New Design        Previous             New Design

         STD110            10 inches H2O             50 psi             (Same as          50 psi               (Same as
                           (25 mbar)                 (3.5 bar)          previous)         (3.5 bar)            previous)

         STD120,           400 inches H2O            3000 psi           4500 psi          3000 psi             4500 psi
         STD924            (1 bar)                   (207 bar)          (310 bar)         (207 bar)            (310 bar)

         STD130,           100 psi
                                                            "                   "                   "                 "
         STD930            (7 bar)

         STD170,           3000 psi
                                                            "                   "                   '"                "
         STD974            (207 bar)

        Note 1 Maximum Working Pressure Rating and Overpressure Rating vary with materials of construction;
               for more specific information refer to the appropriate Product Specification Guide.




06/03                                  34-ST-99-23 (Addendum to 33-ST-25-15B)                                     7 of 8
8 of 8   34-ST-99-23 (Addendum to 33-ST-25-15B)   06/03

								
To top