Engage Targets with an M249 Machine Gun by 7t2cv1NQ

VIEWS: 26 PAGES: 8

									                              Engage Targets with an M249 Machine Gun
                                              071-010-0006

Conditions: Given an M249 machine gun and linked 5.56-mm ammunition.

Standards: Apply correct M249 machine gun target engagement techniques and hit each target in your
assigned sector of fire.

Performance Steps
  1. Assume a suitable firing position. Based on your situation, assume the position that will allow you to
     observe and engage targets, yet minimize your exposure to enemy fire.
       a. Bipod-supported prone. The bipod-supported prone position (Figure 071-010-0006-1) and the
          bipod-supported fighting position (Figure 071-010-0006-2) are the best positions for delivering
          effective fire on targets. Assume these positions when possible.




                          Figure 071-010-0006-1. Bipod-supported prone position.




                         Figure 071-010-0006-2. Bipod-supported fighting position.

         b. Shoulder. Use the shoulder firing position (Figure 071-010-0006-3) to engage targets at
            ranges less than 100 meters when no other position can be assumed or when the situation
            dictates its use; for example, in the final stages of the assault.




                                                                                                          1
Performance Steps




                           Figure 071-010-0006-3. Shoulder firing position.

       c. Underarm. Use the underarm firing position when moving in and around the objective during
          the assault (Figure 071-010-0006-4).




                           Figure 071-010-0006-4. Underarm firing position.

       d. Hip. Use the hip firing position when closing with the enemy, when a heavy volume of fire in
          the target area is required, and when rapid movement is not necessary (Figure 071-010-
          0006-5).




2
Performance Steps




                                Figure 071-010-0006-5. Hip firing position.


   2. Fire the weapon using the correct sight picture (Figure 071-010-0006-6).
        a. Sight alignment. Center the front sight post in the peep sight (A, Figure 071-010-0006-6).
        b. Focus of the eye. Place the eye directly on line with the center of the rear sight. Focus on the
            tip of the front sight post. The natural ability of the eye to center objects in a circle and to
            seek the point of greatest light (center of the peep sight) aids in providing correct sight
            alignment.
         c. Sight picture. Center the target over the front sight post (B, Figure 071-010-0006-6). If firing
            on a 10-meter range target, use the sight picture in C, Figure 071-010-0006-6.




                                   Figure 071-010-0006-6. Sight picture.


   3. Fire the weapon in three-round bursts at the rate of fire appropriate for target size. Use correct
      trigger manipulation techniques (that is, pull the trigger straight to the rear and release it).
   4. Apply correct engagement technique based on target types (Figure 071-010-0006-7).




                                                                                                           3
Performance Steps




                    Figure 071-010-0006-7. Classes of fire with respect to the weapon.

         a. Fixed fire. This type of fire is delivered against a point target when the depth and width of the
            beaten zone will cover the target. Only one aiming point is necessary to cover the target with
            fire.
         b. Traversing fire. This type of fire is distributed in width by successive changes in direction,
            which means moving the muzzle of the weapon to the left or right to distribute fire laterally.
            To make minor changes in direction, shift the shoulders to the right or left to select
            successive aiming points throughout the width of the target area. For major changes, move
            the elbows and align the body to remain directly behind the gun.
         c. Searching fire. This type of fire is distributed in depth by successive changes in elevation,
            which means moving the muzzle of the weapon up or down to distribute fire in depth. Select
            successive aiming points in depth throughout the target area. To make changes in elevation,
            move elbows closer together to lower the muzzle or farther apart to raise the muzzle.
         d. Traversing and searching fire. This type of fire is distributed in width and depth by successive
            changes in direction and elevation. Combining traversing fire and searching fire provides
            good coverage of the target. Adjustments are made in the same manner as described for
            traversing fire and searching fire, which means moving the muzzle of the weapon to the left
            or right to distribute fire laterally. To make minor changes in direction, shift the shoulders to
            the right or left to select successive aiming points throughout the width of the target area. For
            major changes, move the elbows and align the body to remain directly behind the gun.
    5. Use observation of fire and adjustment of fire to place effective fire on the target.
        a. Observation of fire. Observe the burst of fire by noting the strike of the rounds in the target
           area, the tracers in flight, or, in the case of the 10-meter range, the holes made in the target.
        b. Adjustment of fire. Use the adjusted aiming point method to quickly adjust fires without
           making a sight adjustment. If the initial burst misses the target, rapidly select a new aiming
           point the same distance from the center of impact of the initial burst but in the opposite
           direction. Fire a second burst (Figure 071-010-0006-8).




                           Figure 071-010-0006-8. Adjusted aiming point method.


    6. Use correct engagement technique to engage specific targets.



4
Performance Steps
        a. Point target. Engage point targets with fixed fire (Figure 071-010-0006-9).




                            Figure 071-010-0006-9. Engagement of point target.

         b. Area target. Initially, aim at the midpoint of the target area. Traverse and search to either
            flank, then back to the opposite flank (Figure 071-010-0006-10).




                            Figure 071-010-0006-10. Engagement of area target.

         c. Linear target. Initially, aim at the midpoint of the target. Traverse fire to one flank and then to
            the other to cover the entire target (Figure 071-010-0006-11).




                                   Figure 071-010-0006-11. Linear target.

         d. Deep target. Initially, aim at the midpoint of the target unless another portion of the target is
            more critical or presents a greater threat. Search down to one aiming point in front of the near
            end and back up to one aiming point beyond the far end (Figure 071-010-0006-12).




                                                                                                                  5
Performance Steps




                                  Figure 071-010-0006-12. Deep target.

       e. Linear target with depth. Initially, aim at the midpoint of the target unless another portion of
          the target is more critical or presents a greater threat. Traverse and search to the flank
          closest to your position then back to the other flank to cover the entire target (Figure 071-
          010-0006-13).




                           Figure 071-010-0006-13. Linear targets with depth.

      f. Moving target. To hit a moving target, estimate the speed of the target and the lead required to
         fire and hit it. Fire, then track the target as it moves. Adjust the lead by observing tracers and
         the strike of the bullets (Figures 071-010-0006-14 and -15).




                              Figure 071-010-0006-14. Vehicle lead table.




6
Performance Steps




                           Figure 071-010-0006-15. Moving target aiming points.


Evaluation Preparation: SETUP: Evaluate this task on a live-fire range by having the Soldier fire Table
IV in FM 3-22.68. Evaluate the Soldier's ability to use correct engagement techniques to engage specific
types of targets. Provide the Soldier with equipment and materials required to fire the course.

BRIEF SOLDIER: Brief Soldier on range safety in accordance with installation regulations. Tell the Soldier
to assume the bipod-supported prone position or bipod-supported fighting position. Tell the Soldier you
are evaluating both his/her ability to adjust fire and his/her ability to hit the target.

Performance Measures                                                                       GO     NO-GO
  1. Assumed correct bipod-supported prone position or bipod-supported fighting           ——       ——
     position.
  2. Field zeroed on a 300-meter target with no more than 12 rounds.                      ——       ——
  3. Engaged single E-type silhouettes (point targets) at various ranges.                 ——       ——
  4. Engaged double E-type silhouettes (automatic weapon positions) at various            ——       ——
     ranges.
  5. Engaged linear E-type silhouettes (troops on line) at various ranges.                ——       ——

Evaluation Guidance: Score the Soldier GO if all performance measures are passed. Score the Soldier
NO-GO if any performance measure is failed. If the Soldier scores NO-GO, show the Soldier what was
done wrong and how to do it correctly.

References
    Required                                         Related
                                                     FM 3-22.68




                                                                                                           7
8

								
To top