Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

LT16613 by ahmed.pop112

VIEWS: 1 PAGES: 7

hhhh

More Info
									MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 08-21-02                             Updated: 07/25/03                 MSDS: LT16613
Prepared by: Fleetguard, Inc.


1.   CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
       Product Code: CC2778 (gallon)
       Product Name: ES Optimax Converter Liquid

Fleetguard, Inc., 1200 Fleetguard Road, Cookeville, Tennessee 38506
General Information Phone (931) 526-9551: Emergency Phone CHEMTREC (800) 424-9300


2.   COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS

       Component                     CAS#          Exposure Limits                            % by Wt.
       Water                         7732-18-5     PEL/TWA: None                              More
                                                   TLV(ACGIH): None                           than
                                                                                              45%
                                                                                              Less
       Inorganic Acid Salts        Proprietary     PEL/TWA: 5 mg/m3                           than
       and Organic Acid Salts                      TLV(ACGIH): 5 mg/m3                        45%




3.   HAZARDS IDENTIFICATION

                                     EMERGENCY OVERVIEW

       Skin, eye and respiratory irritant. Do not ingest. Keep away from open flame.




     Potential Health Effects
      Eye: Based on the pH and irritation potential of this mixture’s constituents, the mist or liquid can be
      expected to cause mild to moderate irritation or inflammation of the eyes

      Skin: Based on the pH and irritation potential of this mixture’s constituents, the mist or liquid can be
      expected to cause mild to moderate irritation or inflammation of the eyes



Page 1 of 7                                                               ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 08-21-02                             Updated: 07/25/03                 MSDS: LT16613
Prepared by: Fleetguard, Inc.

      Ingestion: The toxicology information for one of the components of this mixture is as follows:
       Inorganic Acid, Sodium Salt: Moderately toxic by ingestion

      Inhalation: Breathing excessive levels of the vapor or mist can irritate the respiratory tract.
      Excessive vapor concentrations of the major component, as might be generated during heating of
      this material, have occasionally been reported to cause adverse effects on the blood-forming
      system and the nervous system

     Chronic (Cancer) Information: Information not available

     Teratology (Birth Defect) Information: Information not available

     Reproduction Information: Information not available


4.   FIRST AID MEASURES
      Routes of Entry: Inhalation, Skin and Ingestion

      Signs and symptoms of exposure: Mild to moderate irritation or inflammation of the eyes; mild to
      moderate irritation of the skin.

                                        Treatment
      Eyes: Immediately flush eyes with plenty of cool water for at least 15 minutes. Do NOT permit victim
      to rub eyes. GET MEDICAL ATTENTION IMMEDIATELY

      Skin: Immediately flush skin with plenty of water while removing contaminated clothing.

      Ingestion: If victim is conscious and able to swallow, quickly have victim drink water or milk to
     dilute. Do NOT give sodium bicarbonate, fruit juices or vinegar. NEVER give anything by mouth if
     victim is unconscious or having convulsions. Induce vomiting only if advised by physician or Poison
     Control Center. CALL PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.

      Inhalation: Immediately remove victim to fresh air. If victim has stopped breathing, give artificial
      respiration, preferably mouth to mouth. GET MEDICAL ATTENTION IMMEDIATELY.

      Note to Physicians: None



5.   FIRE FIGHTING MEASURES
     FLAMMABLE PROPERTIES:
     Flash Point: N/A   Method: N/A

     FLAMMABLE LIMITS:
     Lower Flammable Limit: N/A


Page 2 of 7                                                              ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 8-21-02                     Updated: 07/25/03                                MSDS:
LT16613
Prepared by: Fleetguard, Inc.
     Upper Flammable Limit: N/A

     AUTOIGNITION TEMPERATURE: N/A

     HAZARDOUS COMBUSTION PRODUCTS: Not known

     EXTINGUISHING MEDIA: Use water spray, dry chemical, foam or carbon dioxide

     FIRE FIGHTING INSTRUCTIONS: (Note: Individuals should perform only those firefighting
     Procedures for which they have been trained.) Use water to keep fire-exposed containers cool. If a
     spill or leak has not ignited use water spray to disperse the vapors. Water spray may be used to
     flush spills away from fire and diluted spills to noncombustible proportions.
     Protective Equipment for Fire Fighters: Fire fighters should wear self-contained breathing
     apparatus in the positive pressure mode with a full face piece when there is a possibility of exposure
     to smoke, fumes, or hazardous decomposition products.




6.   ACCIDENTAL RELEASE MEASURES
      Protect People: Wear appropriate respiratory equipment and protective equipment as described in
      Section 8.

      Protect the Environment: Avoid uncontrolled releases of this material. Where spills are possible,
      a Comprehensive spill release response plan should be developed and implemented.

      Cleanup: Contain spilled material. Transfer to secure containers. Where necessary, collect using
      absorbent media. In the event of an uncontrolled release, report under the applicable laws and
      regulations. All recovered material should be packaged, labeled, transported and disposed of or
      reclaimed in conformance with good engineering practices. Avoid land filling of liquids. Reclaim
      where possible.




7.   HANDLING AND STORAGE
     •   To prevent possible storage container rupture, do not permit to freeze.
     •   Do not expose children and pets to this material.
     •   Keep container closed.
     •   Keep away from open flames.
     •   After handling product, wash thoroughly with soap and water before drinking, eating or smoking.
     •   Container hazardous when emptied. Since emptied containers retain product residues, all
         hazardous precautions described on this MSDS must be observed.




Page 3 of 7                                                            ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 8-21-02                      Updated: 07/25/03                              MSDS:
LT16613
Prepared by: Fleetguard, Inc.

8.    EXPOSURE CONTROLS/PERSONAL PROTECTION
     ENGINEERING CONTROLS: Handle in the presence of adequate ventilation. Engineering controls
        should be used whenever feasible to maintain concentrations below acceptable exposure criteria
     (see Section 2), including enclosures and local exhaust ventilation.


      RESPIRATORY PROTECTION: Where exposure is likely to exceed acceptable criteria (see
      Section 2) and engineering controls are not feasible, use NIOSH/MISHA approved respiratory
      protection equipment. Respirators should be selected based on the form and concentration of
      contaminants in air and in accordance with OSHA (29 CFR 1910.134).


      SKIN PROTECTION: Wear gloves and protective clothing which are impervious to the product for
      the duration of exposure if there is potential for skin contact.


      EYE PROTECTION: Wear safety glasses meeting the specifications of ANSI standard Z87.1
      where no contact with the eye is anticipated. Chemical safety goggles meeting the specification of
        ANSI Standard Z87.1 should be worn whenever there is the possibility of splashing or other
contact       with the eyes.


9.    PHYSICAL AND CHEMICAL PROPERTIES
      Boiling Point (@ 760 mmHG): Not established
      Vapor Pressure (mmHG): Not known
      Vapor Density (Air = 1): Not established
      Solubility in Water (% WGT.): Infinite miscibility
      Specific Gravity: 1.165
      pH: (10 vol. %): 8.7
      Appearance: Clear and red liquid
      Volatility by volume: Not Known
      Volatile Organic Compounds (VOC): N/A


10. STABILITY AND REACTIVITY
      Chemical Stability: Generally stable

      Incompatibility: Avoid concentrated strong acids, oxidizing agents and bases.

     Hazardous Decomposition Products: If pyrolyzed, thermal decomposition products of residue may
     include C, CO, CO2, H2O, NH3, organic vapors and nitrogen-containing.


     Hazardous Polymerization: Not likely to occur


Page 4 of 7                                                           ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 8-21-02                      Updated: 07/25/03                                   MSDS:
LT16613
Prepared by: Fleetguard, Inc.




11. TOXICOLOGICAL INFORMATION
      Eye: Based on the pH and the irritation potential of this mixture’s constituents, the mist or liquid can
      Be expected to cause mild to moderate irritation of the eye.

      Skin: Based on the pH and the irritation potential of this mixture’s constituents, the mist or liquid can
      Be expected to cause mild to moderate irritation of the skin

      Ingestion: Not known

      Inhalation: Breathing excessive levels of the vapor or mist can irritate the respiratory tract.
      Excessive vapor concentrations of the major component, as might be generated during heating of
      this material, have occasionally been reported to cause adverse effects on the blood-forming
      system and the nervous system.

     Subchronic: Information not available

     Relevant Test Data
     Lowest Known LD50 (Oral): Not known
     Lowest Known LD50 (Skin): Rats – 520 mg/kg
                                 Mice – 257 mg/kg

     Chronic/Carcinogenicity: Information not available.

     Teratology: Information not available

     Reproduction: Information not available

     Mutagenicity: Information not available

     National Toxicology Program: Not known

      International Agency for Research on Cancer: Not known

12. ECOLOGICAL INFORMATION
      ENVIRONMENTAL FATE
      Movement & Partitioning: Not known
      Degradation & Transformation: Not known
      Ecotoxicology: Not Known



13. DISPOSAL CONSIDERATIONS:

Page 5 of 7                                                               ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 8-21-02                      Updated: 07/25/03                                 MSDS:
LT16613
Prepared by: Fleetguard, Inc.

      RCRA #: Not established
      EPA #: Not established
      RECYCLABLE: Not established

14. TRANSPORT INFORMATION
      U.S. Department of Transportation: NPFA: No Rating, HMIS: No Rating
      Proper Shipping Name: Not applicable



15. REGULATORY INFORMATION
     U.S. FEDERAL REGULATIONS -

      United States TSCA
      Inventory: This product is a mixture; therefore, it is not listed in the TSCA Inventory of Chemical
      substances. All of the components of the mixture are listed in the TSCA Inventory of Chemical 1
      substances

     EPA Regulations
     Water Standards: Not established

      Atmospheric Standards: Not established

      CERCLA: Reportable Quantity (RQ): Not established

     Section 313: SARA Title III:
     Section 311/312 - Categories: Immediate / Acute Health Hazard; Delayed / Chronic Health Hazard

     OSHA Regulations: Not Known

     INTERNATIONAL REGULATIONS:

     Canadian WHMIS: Refer elsewhere in the MSDS for specific warnings and safe handling
     information. Refer to the employer's workplace education program.

     Canadian Environmental Protection Act (CEPA): Information not available.

     EINECS: Information not available

     STATE REGULATIONS: Consult state regulatory agencies to determine specific regulations that
     might apply to this product.




Page 6 of 7                                                             ES Optimax Converter Liquid
MATERIAL SAFETY DATA SHEET
Initial MSDS Date: 8-21-02                       Updated: 07/25/03                                   MSDS:
LT16613
Prepared by: Fleetguard, Inc.



6.    OTHER INFORMATION

      Disclaimer of Liability: The information contained herein is based on the data available to us and, is
      to the best of our knowledge and belief, accurate. However, since the conditions of handling and
      use are beyond our control, we assume no liability for damages incurred by use of this material.
      Although certain hazards are described herein, we cannot guarantee that these are the only
      hazards          that may exist. Users of this product should satisfy themselves that the conditions
and methods of              use assure the product is used safely. No representations or warranties, either
expressed or implied,           of any nature are made hereunder with respect to the information contained
herein. It is the                  responsibility of the user to comply with any and all federal, state, or local
laws and regulations that                  may exist. Nothing contained herein is to be construed as a
recommendation for use in violation of             any applicable laws or regulations.




Page 7 of 7                                                                ES Optimax Converter Liquid

								
To top