newport
Shared by: fanzhongqing
-
Stats
- views:
- 7
- posted:
- 5/18/2012
- language:
- English
- pages:
- 38
Document Sample
Woodwinds Wood Alloy Blinds and
®
Newport Woods Basswood Blinds
2009 Manufacturers Price List and Reference Guide
NEW FOR 2009!
Introducing Newport Woods
Effective January 1, 2009
Not a suggested price list.
Prices are subject to change without notice.
Comfortex Newport Woods Basswood Blinds, Woodwinds Wood Alloy Blinds ®
and Woodwinds Specialty Shapes ®
Effective January 1, 2009 • Updated May 18, 2009
This Price Code Listing contains product pricing, product specifications and technical information for the complete
line of Comfortex Newport Woods Basswood Blinds, Woodwinds Wood Alloy Blinds and Woodwinds Specialty
Shapes.
Woodwinds Wood Alloy Blinds (pages 1-11)
Options to Mix and Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Hardware Option Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Pricing Grids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Blinds Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Finished Blind Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Woodwinds Slat Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Bowing Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Woodwinds Valances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Types of Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
End Cut Outs Blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Ladderbraid and Cloth Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Stack Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Bottom Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Mounting Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Woodwinds Blinds with Tilt Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Measuring Instructions for Woodwinds Wood Alloy Blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Woodwinds Blinds Features at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Newport Woods Basswood Blinds (pages 12-20)
Price Grids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Blind Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Finished Blind Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Newport Woods Blinds Colors and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Newport Woods Blinds Colors Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Slat Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Rounded Corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Routing Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Newport Woods Valances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Individual Decorative Valances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Decorative Tape Valance Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Ladderbraid and Cloth Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Ladder and Tape Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Newport Wood Blinds with Tilt Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Mounting Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Stack Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
End Cut Out Blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Measuring Instructions for Newport Woods Blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Newport Woods Blinds Features at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Woodwinds Specialty Shapes (pages 21-28)
Pricing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Woodwinds Specialty Shapes Slat Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Woodwinds Specialty Shapes Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Creating the Perfect Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Measuring - Starburst and Sunset Specialty Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-27
i
Woodwinds Specialty Shapes Continued
Woodwinds Specialty Shapes Features at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
General Information and Order Forms (pages 29-34)
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Child Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Battery Operated Motorized Blinds Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Newport Woods Blinds, Woodwinds Wood Alloy Blinds and Specialty Shapes Warranty Information . .30
Woodwinds Wood Alloy Blinds Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Newport Woods Blinds Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Woodwinds Specialty Shapes Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34
ii
Woodwinds Wood Alloy Blinds
Options to Mix and Match
Woodwinds Wood Alloy Blinds
Slat Styles
Reed™ 2" S-Curve 2" Slat 2½" Plantation 2½" Beveled
Flat Slat ShutterBlind™ Slat Profile Slat
Hardware Bottom Rail Valance Routing Options
Standard Trapezoidal Crown Traditional Routeless
Rectangular
Lift Options Tilt Options
Ladderbraid Decorative Cloth Wand Tilt Cord Tilt Tilt Motors
Tapes for 2" Slats
1
Woodwinds Wood Alloy Blinds
Woodwinds Wood Alloy Blinds
Hardware Option Availability
Cloth Tilt Crown
Ladderbraid Tapes Routeless Motors Valance
Reed 2" Flat Slat • • • • •
S-Curve 2" Slat • • • • •
2½" Plantation ShutterBlind Slat • • • •
2½" Beveled Profile Slat • • • •
Color Option Availability
Reed S-Curve 2½" Plantation 2½" Beveled
Whites 2" Flat Slat 2" Slat ShutterBlind Slat Profile Slat
Bassoon • • •
Cornetta • • • •
Flute • • • •
Oboe • • • •
Ocarina • • • •
Pan Pipe • •
Reed S-Curve 2½" Plantation 2½" Beveled
Fine Finish Woodtones 2" Flat Slat 2" Slat ShutterBlind Slat Profile Slat
Cinnamon Stick • •
Deep Cherry • • • •
Mahogany • •
Maple • • • •
Mission Oak • • • •
Natural • • • •
Oak • • • •
Pecan • •
Rich Mahogany • •
2
Reed 2" Flat Blinds White Slats
Woodwinds Wood Alloy Blinds
Width In Inches Ladderbraid
24 30 32 36 42 48 54 60 66 72 78 84 96 108 120
30 178 215 232 258 281 320 360 406 432 462 532 568 631 731 828
36 206 248 259 287 314 352 399 452 484 510 582 625 703 813 921
42 231 272 290 316 348 391 446 504 534 570 649 698 792 908 1025
48 251 300 320 349 382 428 490 550 594 635 724 784 896 997 1121
54 277 330 349 382 424 473 542 606 664 712 812 873 987 1104 1237
60 304 357 380 414 464 512 599 666 731 785 892 961 1072 1220 1357
Length In Inches
66 332 383 401 443 505 571 657 733 801 861 978 1051 1156 1338 1493
72 361 408 428 477 550 623 712 799 861 929 1051 1134 1248 1452 1628
78 373 428 453 509 578 659 754 843 913 999 1133 1220 1348 1535 1718
84 401 462 488 542 623 708 803 884 979 1075 1214 1308 1445 1637 1801
90 430 492 519 576 662 756 857 942 1046 1146 1286 1397 1546 1745 1919
96 445 516 545 605 702 798 907 1004 1118 1221 1377 1492 1649 1848 2047
102 465 546 577 642 745 849 964 1077 1185 1300 1476 1587 1756 1964 2195
108 489 575 607 676 784 893 1018 1126 1251 1381 1571 1685 1864 2075 2294
114 511 602 641 713 829 944 1073 1189 1317 1456 1671 1783 1978 2186 2422
120 537 633 673 750 870 992 1126 1263 1381 1535 1767 1879 2096 2294 2574
Due to the size and required lifting forces, it is recommended Tilt motors are not available on blinds Blinds in this
that blinds that fall within the shaded area be built as multiple with sizes to the right of the dark line range are built
blinds with a common valance. and blinds over 96" wide. as two or three-
on-one head
rails.
Woodwinds Surcharges and Upgrades
Fine Finish Woodtone Colors: • Add 10% to grid
Routeless Option: • No Charge
Blinds under 12" wide: • Add $44.00 to price of blind
Wand Tilt: • Standard on all Reed Blinds. Cord tilt available at no charge.
Solid and Decorative Tape Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
Solid 76 76 76 76 91 91 91 110 110 110 110 129 129 129 148 148 148 148
Decorative 148 148 148 148 182 182 182 219 219 219 219 257 257 257 292 292 292 292
Tapes are not available with the Routeless Option.
Individual Valance Pricing Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
76 76 76 76 120 120 120 120 164 164 164 164 197 197 197 257 257 257
Tilt Motor Pricing: • Motor unit: Add $515.00 (includes 5" receiving eye and lithium battery wand)
• Hand held remote (includes 3 AA batteries): Add $172.00
• 3 replacement alkaline AA batteries (for remote only): Add $21.00
• 10" satellite receiving eye: Add $83.00
ALL STANDARD WOODWINDS DISCOUNTS APPLY TO MOTOR PRICING.
See page 10 for tilt motor details.
End Cut Outs: • Each side (4½" or less): Add $82.00 for each side.
• All cut outs must be approved by Comfortex Technical Service.
Two and Three-on-One Blinds: • Add the total width of the blinds combined to price.
3
S-Curve 2" Blinds White Slats
Woodwinds Wood Alloy Blinds
Width In Inches Ladderbraid
24 30 32 36 42 48 54 60 66 72 78 84 96 108 120
30 196 237 255 284 309 352 396 447 475 508 585 625 694 804 911
36 227 273 285 316 345 387 439 497 532 561 640 688 773 894 1013
42 254 299 319 348 383 430 491 554 587 627 714 768 871 999 1128
48 276 330 352 384 420 471 539 605 653 699 796 862 986 1097 1233
54 305 363 384 420 466 520 596 667 730 783 893 960 1086 1214 1361
60 334 393 418 455 510 563 659 733 804 864 981 1057 1179 1342 1493
Length In Inches
66 365 421 441 487 556 628 723 806 881 947 1076 1156 1272 1472 1642
72 397 449 471 525 605 685 783 879 947 1022 1156 1247 1373 1597 1791
78 410 471 498 560 636 725 829 927 1004 1099 1246 1342 1483 1689 1890
84 441 508 537 596 685 779 883 972 1077 1183 1335 1439 1590 1801 1981
90 473 541 571 634 728 832 943 1036 1151 1261 1415 1537 1701 1920 2111
96 490 568 600 666 772 878 998 1104 1230 1343 1515 1641 1814 2033 2252
102 512 601 635 706 820 934 1060 1185 1304 1430 1624 1746 1932 2160 2415
108 538 633 668 744 862 982 1120 1239 1376 1519 1728 1854 2050 2283 2523
114 562 662 705 784 912 1038 1180 1308 1449 1602 1838 1961 2176 2405 2664
120 591 696 740 825 957 1091 1239 1389 1519 1689 1944 2067 2306 2523 2831
Due to the size and required lifting forces, it is recommended Tilt motors are not available on blinds Blinds in this
that blinds that fall within the shaded area be built as multiple with sizes to the right of the dark line range are built
blinds with a common valance. and blinds over 96" wide. as two or three-
on-one head
rails.
Woodwinds Surcharges and Upgrades
Fine Finish Woodtone Colors: • Add 10% to grid
Routeless Option: • No Charge
Blinds under 12" wide: • Add $44.00 to price of blind
Wand Tilt: • Standard on all S-Curve Blinds. Cord tilt available at no charge.
Solid and Decorative Tape Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
Solid 76 76 76 76 91 91 91 110 110 110 110 129 129 129 148 148 148 148
Decorative 148 148 148 148 182 182 182 219 219 219 219 257 257 257 292 292 292 292
Tapes are not available with the Routeless Option.
Individual Valance Pricing Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
76 76 76 76 120 120 120 120 164 164 164 164 197 197 197 257 257 257
Tilt Motor Pricing: • Motor unit: Add $515.00 (includes 5" receiving eye and lithium battery wand)
• Hand held remote (includes 3 AA batteries): Add $172.00
• 3 replacement alkaline AA batteries (for remote only): Add $21.00
• 10" satellite receiving eye: Add $83.00
ALL STANDARD WOODWINDS DISCOUNTS APPLY TO MOTOR PRICING.
See page 10 for tilt motor details.
End Cut Outs: • Each side (4½" or less): Add $82.00 for each side.
• All cut outs must be approved by Comfortex Technical Service.
Two and Three-on-One Blinds: • Add the total width of the blinds combined to price.
4
2½" Plantation ShutterBlinds White Slats
2½" Beveled Profile Blinds
Woodwinds Wood Alloy Blinds
Width In Inches Ladderbraid
24 30 32 36 42 48 54 60 66 72 78 84 96 108 120
30 238 287 310 344 375 427 481 542 577 617 710 758 842 976 1105
36 275 331 346 383 419 470 533 603 646 681 777 834 939 1085 1230
42 308 363 387 422 465 522 595 673 713 761 866 932 1057 1212 1368
48 335 401 427 466 510 571 654 734 793 848 967 1047 1196 1331 1497
54 370 441 466 510 566 631 724 809 886 951 1084 1165 1318 1474 1651
60 406 477 507 553 619 684 800 889 976 1048 1191 1283 1431 1629 1812
Length In Inches
66 443 511 535 591 674 762 877 979 1069 1149 1306 1403 1543 1786 1993
72 482 545 571 637 734 832 951 1067 1149 1240 1403 1514 1666 1938 2173
78 498 571 605 680 772 880 1007 1125 1219 1334 1513 1629 1800 2049 2294
84 535 617 651 724 832 945 1072 1180 1307 1435 1621 1746 1929 2185 2404
90 574 657 693 769 884 1009 1144 1258 1396 1530 1717 1865 2064 2330 2562
96 594 689 728 808 937 1065 1211 1340 1493 1630 1838 1992 2201 2467 2733
102 621 729 770 857 995 1133 1287 1438 1582 1736 1970 2119 2344 2622 2930
108 653 768 810 902 1047 1192 1359 1503 1670 1844 2097 2249 2488 2770 3062
114 682 804 856 952 1107 1260 1432 1587 1758 1944 2231 2380 2641 2918 3233
120 717 845 898 1001 1161 1324 1503 1686 1844 2049 2359 2508 2798 3062 3436
Due to the size and required lifting Tilt motors are not available on blinds with sizes to the right of Blinds in this
forces, it is recommended that blinds the dark line and blinds over 96" wide. range are built
that fall within the shaded area be as two or
built as multiple blinds with a common three-on-one
valance. head rails.
Woodwinds Surcharges and Upgrades
Fine Finish Woodtone Colors: • Add 5% to grid
Routeless: • No Charge
Wand Tilt: • Not available with Beveled Profile and Plantation ShutterBlinds
Decorative Cloth Tapes: • Not available with Beveled Profile and Plantation ShutterBlinds
Tilt Motor Pricing: • Motor unit: Add $515.00 (includes 5" receiving eye and lithium battery wand)
• Hand held remote (includes 3 AA batteries): Add $172.00
• 3 replacement alkaline AA batteries (for remote only): Add $21.00
• 10" satellite receiving eye: Add $83.00
ALL STANDARD WOODWINDS DISCOUNTS APPLY TO MOTOR PRICING.
See page 10 for tilt motor details.
End Cut Outs: • Each side (4½" or less): Add $82.00 for each side.
• All cut outs must be approved by Comfortex Technical Service.
Two and Three-on-One Blinds: • Add the total width of the blinds combined to price.
Individual Valance Pricing Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
76 76 76 76 120 120 120 120 164 164 164 164 197 197 197 257 257 257
5
Blind Specifications Woodwinds Slat Designs
2-Inch Blinds S-Curve (2" contemporary slat)
Woodwinds Wood Alloy Blinds
Width Length Standard: Wand Tilt. Available in
Standard Rectangular Min. 8"* Min 12" 6 whites and 9 woodtones.
Max. 96" Max. 120"
Plantation (2½" elliptical louver
Two-On-One Min. 30" Min. 12" slat)
Max. 120" Max. 120" Standard: Cord Tilt. Available in
5 whites and 5 woodtones.
Three-On-One Min. 45" Min. 12"
Max. 120" Max. 120" Reed (2" flat slat)
Standard: Wand Tilt. Available in
Motorization Min. 20"** Min. 12" 6 whites and 9 wood tones.
Max. 96" Max. 120"**
Beveled Profile (2½" beveled
slat)
2½-Inch Blinds Standard: Cord Tilt. Available in
Width Length 4 whites and 5 woodtones.
Standard Rectangular Min. 13"* Min 12"
Max. 96" Max. 120" Finished Blind Dimensions
Inside Mount
Two-On-One Min. 30" Min. 12" Headrail and Slats: ½" less than the ordered width
Max. 120" Max. 120" Length: Ordered Length
Valance: 1
/8" narrower than ordered width
Three-On-One Min. 45" Min. 12"
Max. 120" Max. 120" Outside Mount
Headrail and Slats: Ordered width
Motorization Min. 20"** Min. 12" Length: Ordered length
Max. 96" Max. 120"** Valance: 1¼" wider than ordered width
• * Center tilt is only available with 2" slat blinds. Blinds
measuring 8" OB up to 12½" IB or 12" OB are Bowing Tolerance
available with center tilt only, no lift cords. Woodwinds is a highly engineered product constructed from
high performance composite materials. Comfortex has
• **Minimum width for a Motorized Blind is 20" OB established the following tolerance limit for bowing for
and 20½" IB. Refer to the price grids for specific size Woodwinds Blinds.
availability.
The difference between the point of a slat closest to the head
• All blinds with ladderbraid measuring from 12" OB to rail and the point farthest from the head rail will not be over
24" OB or 12" IB to 24½" IB must have split controls. 1
/8".
And, the difference between the point of slat closest to any
• All blinds with cloth tape measuring from 12" OB to other slat and the point farthest from the same slat will not
28" OB or 12" IB to 28½" IB must have split controls. be over 1/8".
• There is a ¼" to ½" distance between blinds on two and
three-on-one blinds.
6
Woodwinds Valances Outside Mount (OB) Valances
All Woodwinds Blinds come Outside Mount Valances are made with returns.
with a stylish, color matched
Woodwinds Wood Alloy Blinds
valance to accent the head OB Standard Valance: The valance is cut to the ordered
rail. All Woodwinds Blinds blind width plus 1¼" on the
comes with a Crown Valance. inside of the valance (length A to
B on Figure 1).
The Crown Valance is 3" high with two standard 3" returns.
All Plantation ShutterBlind returns are 33/8". OB Custom Valance: The valance is cut to the ordered
valance width on the inside of the
valance (length A to B on Figure
Woodwinds Blinds Valance Measurement 1) with returns made as ordered.
Instructions Returns can be cut as small as ½"
• Valances and returns are cut at the inside (length C to D on Figure 1).
measurement. The inside measurement refers to the Always make sure the width ordered is large enough to clear
inside wall of the valance or the returns. (See length A the width of the head rail and brackets.
to B and/or C to D in Figure 1.)
• Comfortex strongly recommends measuring for the Comfortex strongly recommends measuring for the exact size
exact size of the valance needed when measuring for of the valance needed when measuring for your Woodwinds
your Woodwinds Blinds. Blinds.
The inside measurement (A to B) of all valances with returns
equals cut head rail size plus 1¼". Valance Attachment
Valances are attached to the head rail by hidden valance
Outside Mount Valances: For an outside mount blind, the clips.
inside measurement of the valance (A to B) equals the
ordered blind width plus 1¼".
Shallow Mount Valance Option
Shallow Mount Valances: For inside mount blinds with a A Shallow Mount Valance allows
shallow mount valance, the inside measurement of the you to mount a Woodwinds Blind
valance equals ordered blind width plus ¾". (Still 1¼" wider inside the window casing while
than actual cut head rail size.) attaching the valance to the outside
with 5/8" standard returns. The
(Ordered width) - (½" IB deduction) + (1¼" added for Shallow Mount Valance completely
clearance) = (¾" greater than ordered width) conceals the mounting brackets
while creating a look with a lower
profile.
Shallow Mount Valance Top View
Figure 1
WINDOW
WALL WALL
Inside Mount (IB) Valances HEAD RAIL
Inside Mount Valances are made without returns.
SHALLOW MOUNT VALANCE
IB-Standard Valance: The valance is cut to the ordered
blind width minus 1/8". Wide Valances
IB-Custom Valance: The valance is cut exactly to the Woodwinds valances over 96" may be miter cut in the middle
ordered valance width. based on material availability. The two pieces of wood will
IB-Shallow Mount The valance is cut to the ordered need to be joined at time of installation. Due to the inherent
Valance: blind width plus ¾". characteristics of wood, the grain pattern will not necessarily
line up at the miter and may be visible.
Please Note:
If a window is not square, the width may vary at different Common Valance
points on the window. If the ordered width of the blind is less A Common Valance is made to cover more than one blind
than the width that the actual valance will cover, then the to create a unified look. A Common Valance can be an IB,
valance will appear short in width. Please order a custom OB or Shallow Mount Valance. Exact measurements must be
size valance when the width at the top of the window, where supplied.
the valance is attached, is greater than the ordered width.
7
Types of Routing Control Features
Routing refers to how the holes are created in the slats and • Tilt wand is standard on all Reed and S-Curve Blinds.
how the slats and lifting system are assembled. Standard Cord tilt is available at no charge.
Woodwinds Wood Alloy Blinds
Rectangular Woodwinds Blinds are available with two kinds
of routing. • Cord tilt is standard on Plantation ShutterBlinds and
Beveled Profile Blinds. Tilt wand is not available with
Standard Routing: Routing holes for the lift cord are 2½" wide slats.
punched through the center of each slat. The number of
rout holes depends on the length of the slat. The slats then • Standard controls are tilt cord left and lift cord right.
rest on rungs of the ladderbraid or the cloth tapes.
Traditional Routing is standard on all Woodwinds Blinds. Control Position Options Minimum Width
Tilt Cord Left, Lift Cord Right (std) 12"
Routeless: Notches at the back of each slat take the place
of routing holes, allowing for a sleeker look and tighter slat Tilt and Lift Cords Grouped with ladderbraid
closure. The slats then rest on rungs of the ladderbraid. 24" net
Routeless blinds are not available with cloth tapes.
Routeless slats are available with all Woodwinds slat styles. Tilt and Lift Cords Grouped with cloth tape
28" net
Tilt Cord Center, No Lift Cord Under 12" net
Motorization 20"
Standard Wand Length
Blind Length Wand Length
12" -24" 12"
241/8"- 40" 20"
401/8" - 60" 24"
60"1/8" - 84" 36"
Standard Routing Routeless 84"1/8"+ 48"
End Cut Out Blinds • Wand lengths up to 48" are color coordinated wood with
Cut outs are available with all Woodwinds Wood Alloy Blinds. slats while lengths greater than 48" are clear plastic.
Cut outs are $82.00 per side and are limited to less than 4½ Clear plastic wands are available in 60", 70", 78", 90" or
inches. All cut outs are subject to approval by Comfortex 120". Custom wand lengths are available. Please specify
Technical Service department. when ordering.
• Be sure to take exact measurements for your blind with
cut outs and to include a diagram of the window to the
order form.
• The blind’s cut out dimensions are made with the slats
in the closed position. Always measure your cut out
blind with the slats in the closed position.
• Bottom cut out blinds (refer to Figure 5 on page 19)
will have three bottom rails. Blinds will raise from “G”
(refer to Figure 5 on page 19) to head rail.
• Edge cut out blinds (Figure 6 on page 19) will have
two bottom rails.
• Head rail cut out blinds (Figure 7 on page 19) are
controlled on the opposite side of cut out. Inside
mount blinds will raise to the widest width. Outside
mount blinds will raise to the head rail.
• A cloth tape option is available. See price grids on
pages 3-4 for pricing.
8
Ladderbraid and Cloth Tapes Cloth Tapes
• Ladderbraid is standard on all Woodwinds Blinds and Not every Woodwinds Blind is available with all Cloth Tape
are color coordinated with slats. selections. Use the lists below to see which sizes and colors
Woodwinds Wood Alloy Blinds
are available with specific slat styles.
• Plantation and Beveled Blinds are available with
ladderbraid only. Reed and S-Curve Blinds - 1" Cloth Tapes
Color Color Number
• Routeless Blinds are available with ladderbraid only. White 0832
Almond 0835
• The cloth tapes are optional on all Reed and S-Curve Natural 0834
Blinds. Consult the Woodwinds sample deck for color Light Cocoa 0822
selections. Black 0823
Gold 0877
The following tables show the number of ladderbraids or Pale Cocoa 0820
tapes needed to support blinds of specific sizes. Cherry 0821
Ivy 1146
Please Note: The number of ladderbraids or tapes may vary
by width from the charts below on Three-On-One Head Rail Reed and S-Curve Blinds - 11/8" Cloth Tapes
Blinds. Color Color Number
White Flux 2101
Reed Gold Flux 2102
Blind Width Ladders/Tapes Per Blind Sage Bouquet 2202
8" - 22" 2 Spice Bouquet 2203
Tiffany Wood 2802
>22" - 39" 3
Tiffany Glass 2803
>39" - 53" 4
Royal Artisan 2902
>53" - 67" 5 Tonal Artisan 2903
>67" - 81" 6 Woven Bark 3102
>81" - 96" 7 Woven Blend 3103
(Includes both Standard Routing and Routeless)
Reed and S-Curve Blinds - 1½" Cloth Tapes
Color Color Number
S-Curve
Natural Elegance 0902
Blind Width Ladders/Tapes Per Blind White Accent 0910
8" - 27" 2 Ivory Accent 0911
>27" - 43" 3 White Elegance 0901
>43" - 59" 4 White 8005
>59" - 75" 5 Duck White 8112
>75" - 91" 6 Light Beige 8036
>91" - 96" 7 Dark Beige 8093
Forest 8881
(Includes both Standard Routing and Routeless)
Provence Blue 8878
Midnight Blue 8879
Plantation and Beveled Black 8055
Blind Width Ladders Per Blind Wheat Gold 8877
8" - 27" 2 Mulberry 8615
>27" - 43" 3 Cherry 8092
>43" - 59" 4 Chocolate 8062
>59" - 75" 5
>75" - 91" 6
>91" - 96" 7
(Includes both Standard Routing and Routeless)
9
Stack Height Woodwinds Blinds with Tilt Motors
Stack height refers to the thickness of the slat stack once the Woodwinds Wood Alloy Blinds
Woodwinds Blind has been completely raised. These are available with tilt motors.
Woodwinds Wood Alloy Blinds
measurements include the head and bottom rails. Just point the infrared remote
towards the blinds and press a
Reed and S-Curve button to adjust the slats to
Height Stack Height open, closed and anywhere in
48" 7½" between. An internal limit stop
72" 10" protects the motors and slats
84" 11¾" from damage.
96" 133/8"
(with Trapezoidal Bottom Rail) No special installation hardware or wiring requirements are
needed to install Woodwinds tilt motors, making them as
easy to install as they are to use.
Plantation and Beveled
Height Stack Height The motor and battery packs are fully enclosed within the
48" 8¾" head rail so there is nothing to detract from the beauty of
72" 11" the blind. A small infrared eye receives the commands from
84" 12" the remote control, which operates from up to 50 feet away
96" 13¼" and manipulates an unlimited number of blinds without the
(with Trapezoidal Bottom Rail) need to change channels. The minimum blind sizes that will
accommodate motors are >20" OB and >20½" IB.
• Motor unit: $515.00 (includes 5" receiving eye
Bottom Rail
and lithium battery wand)
Trapezoidal Bottom Rail
• Hand held remote (includes 3 AA batteries): $172.00.
standard on all Woodwinds
• 3 replacement alkaline AA batteries (for remote only):
Wood Alloy Blinds.
$21.00.
• 10" satellite receiving eye: $83.00 (to receive remote
signal around draperies or other obstructions)
Battery Life
The battery life will vary based on the type of window
covering selected, the size and weight of the window
covering and the number of times you operate the shade
Trapezoidal on a daily basis.
Comfortex does not warranty the usage life of a battery.
Mounting Information
Battery Replacement
Reed and S-Curve
Eight lithium batteries are included with the wand.
• Minimum Shallow Mounting Surface: /8"
5
Recommended replacement batteries are Energizer® AA
• Minimum Flush Inside Mounting Surface: 3¼"
lithium. These batteries are commonly found in department
• Minimum Outside Mounting Surface: ¾"
stores, home improvement centers, grocery and hardware
Plantation and Beveled stores.
• Minimum Shallow Mounting Surface: /8"
7
Battery Operated Motorized Blinds Warranty
• Minimum Flush Inside Mounting Surface: 3½"
Somfy warrants their motors and motor control systems to
• Minimum Outside Mounting Surface: ¾"
be free from defects in material and workmanship under
normal and proper use for a period of five years starting
from the date stamped on the motor. Mechanical, electrical
and electronic accessories are warranted for one year from
the date of invoice. Batteries are not covered by the
warranty.
10
Measuring Instructions for Woodwinds Wood Woodwinds Features at a Glance
Alloy Blinds • Woodwinds Blinds are made from a combination of
American hardwood and engineered thermal polymer
Woodwinds Wood Alloy Blinds
Comfortex accepts measurements down to /8" increments. 1
Measurements with 16th (ex. 1/16") increments will not be materials. The result are blinds of unparalleled beauty
accepted. and durability.
Inside Mount • Woodwinds Wood Alloy resists warping, fading,
Measure across the width of the window opening in three chipping and cracking for a resilient lifetime
different places — top, middle and bottom. Measurements appearance. Harsh UV light and damaging moisture
should be taken within the window jamb. are no match for Woodwinds.
Provide the smallest of the three measurements to • Four distinct slat styles make Woodwinds a versatile
Comfortex. Be exact. Comfortex will make the necessary choice for any decor: Reed, S-Curve, Beveled, and
deductions to fit the window opening. (See Figure 2 for the Plantation ShutterBlind.
assistance.)
• An extensive palette of whites and Fine Finish
Measure the length of the window opening from the woodtones allow Woodwinds to be matched to
underside of the soffit to the surface of the window sill in two popular accent colors in today’s homes.
places. Use the smallest of these two measurements. (See
Figure 2 for assistance.) • A crown valance finishes off each Woodwinds Blind.
Outside Mount • Woodwinds Blinds can be complemented with one of
Measure the exact width and length of the area to be ten Woodwinds Specialty Shapes for a complete,
covered. On the width, allow at least 2" of an overlap on unified look on even the most elaborate window
each side. An overlap of 3" on each side is recommended. ensembles.
Be sure to take into consideration any obstructions such as • Woodwinds can be customized with a tilt wand or tilt
window trim, molding, locks and cranks. (See Figure 2 for cord for operating convenience.
assistance.)
• Instead of standard ladderbraid, select 1", 11/8" or 1½"
Figure 2 SOFFIT
designer cloth tapes for a colorful accent.
INSIDE • Woodwinds Blinds with ladderbraid can be assembled
with standard route holes or with a routeless “no
OUTSIDE
INSIDE
holes” privacy option.
JAMB
• Two-on-one and three-on-one head rails allow the
INSIDE
OUTSIDE
widest windows to be covered by Woodwinds.
SILL
• Woodwork, fixtures and other obstructions can be
accommodated with cut-outs in the Woodwinds slats.
• Have tilt motors installed in Woodwinds Blinds to for
hard-to-reach applications.
• A Limited Lifetime Warranty serves as our commitment
to your satisfaction.
11
Newport Woods Blinds 2" Smooth Finish
Width in Inches Ladderbraid
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 120
30 248 279 314 345 383 412 459 540 584 618 669 735 794 854 926 1001 1134
36 289 311 349 377 424 459 515 612 656 697 757 825 873 939 1027 1114 1262
42 314 342 393 418 465 508 568 681 729 775 841 929 983 1058 1146 1244 1404
48 336 364 421 453 502 562 628 738 791 844 926 1011 1074 1158 1262 1366 1536
54 383 418 481 508 574 625 713 832 895 954 1046 1149 1218 1303 1428 1512 1695
60 408 443 511 527 609 641 767 847 973 1040 1133 1250 1309 1412 1551 1671 1859
Length in Inches
66 437 470 546 587 659 719 825 970 1043 1120 1224 1347 1422 1541 1683 1833 2045
73 465 505 581 603 716 782 904 1024 1105 1187 1300 1431 1554 1630 1989 2230
78 496 543 600 663 741 816 970 1074 1155 1243 1400 1548 1642 2103 2354
84 533 574 644 716 803 879 1024 1127 1221 1309 1482 1633 2243 2467
90 565 615 666 735 825 936 1058 1168 1272 1400 1573 2391 2629
96 603 659 713 773 869 986 1111 1234 1328 1472 2532 2804
102 618 681 738 794 901 1021 1180 1313 1422 2691 3007
108 669 735 794 857 964 1089 1268 1400 1529 2843 3143
114 691 757 816 879 995 1127 1306 1450 2995 3318
120 713 806 879 945 1065 1209 1372 1494 3143 3526
126 738 854 932 1040 1161 1281 1444 3294 3557
Standard Decorative Valance included in price. Blinds in this
Newport Woods Basswood Blinds
range are built
as two or three-
on-one head
rails.
Newport Woods Blinds Surcharges and Upgrades
Solid and Decorative Tape Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
Solid 76 76 76 76 91 91 91 110 110 110 110 129 129 129 148 148 148 148
Decorative 148 148 148 148 182 182 182 219 219 219 219 257 257 257 292 292 292 292
Tapes are not available with the Cordless Hardware System or with the Routeless feature.
Cordless Hardware System Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102
286 301 317 349 380 408 465 486 521 549 574 N/A N/A N/A N/A
Individual Valance Pricing Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
76 76 76 76 120 120 120 120 164 164 164 164 197 197 197 257 257 257
Routeless Option: • No Charge
Wand Tilt: • No Charge. Cord tilt is standard.
Rounded Corners: • No Charge
Tilt Motor Pricing: • Motor unit: Add $515.00 (includes 5" receiving eye and lithium battery wand)
• Hand held remote (includes 3 AA batteries): Add $172.00
• 3 replacement alkaline AA batteries (for remote only): Add $21.00
• 10" satellite receiving eye: Add $83.00
ALL STANDARD NEWPORT WOODS DISCOUNTS APPLY TO MOTOR PRICING.
See page 18 for tilt motor details.
Decorative Tape Valance: • Add $44.00 for each valance
End Cut-Outs: • $82.00 each side (5½" or less)
• All cut outs must be approved by Comfortex Technical Service.
Blinds under 12" wide: • Add $44.00 to price of blind Not available with 23/8" blinds
Two and Three-on-One Blinds: • Add the total width of the blinds combined to price.
12
Newport Woods Blinds 1 3/8" Smooth, 2" Rustic and
2 3/8" Smooth Finishes
Width in Inches Ladderbraid
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 120
30 280 315 354 386 431 463 518 611 656 695 756 826 895 959 1043 1051 1135
36 324 348 396 427 476 518 579 689 740 778 856 929 984 1055 1155 1170 1264
42 351 383 444 469 524 572 644 769 817 872 952 1046 1110 1190 1293 1306 1410
48 376 412 476 511 569 621 711 833 891 952 1046 1141 1213 1309 1428 1434 1549
54 431 469 541 572 644 701 804 932 1007 1074 1180 1297 1373 1467 1609 1588 1715
60 460 499 575 617 689 759 865 1013 1093 1168 1280 1406 1479 1592 1749 1755 1895
Length in Inches
66 492 530 617 663 743 814 932 1093 1174 1261 1383 1518 1609 1743 1908 1925 2079
73 524 572 656 714 804 881 1023 1155 1244 1338 1470 1615 1749 1836 2088 2255
78 557 611 675 747 833 920 1091 1210 1300 1403 1582 1743 1849 2208 2385
84 602 647 723 804 904 991 1149 1267 1377 1479 1676 1840 2355 2543
90 637 692 753 826 929 1052 1193 1316 1434 1582 1776 2511 2712
96 678 740 801 868 978 1110 1255 1389 1503 1666 2659 2872
102 698 765 830 895 1013 1149 1331 1476 1609 2826 3052
108 753 823 891 965 1084 1229 1425 1576 1724 2985 3224
114 778 853 920 991 1122 1274 1473 1637 3145 3397
120 801 907 991 1062 1197 1361 1544 1682 3300 3564
126 830 968 1055 1174 1303 1437 1624 3458 3735
Standard Decorative Valance included in price. Blinds in this
Newport Woods Basswood Blinds
range are built
as two or three-
on-one head
rails.
Newport Woods Blinds Surcharges and Upgrades
Solid and Decorative Tape Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
Solid 76 76 76 76 91 91 91 110 110 110 110 129 129 129 148 148 148 148
Decorative 148 148 148 148 182 182 182 219 219 219 219 257 257 257 292 292 292 292
Tapes are not available with the Cordless Hardware System or with the Routeless feature.
Cordless Hardware System Upgrade Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102
286 301 317 349 380 408 465 486 521 549 574 N/A N/A N/A N/A
Individual Valance Pricing Width in Inches
24 28 32 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120
76 76 76 76 120 120 120 120 164 164 164 164 197 197 197 257 257 257
Routeless Option: • No Charge
Wand Tilt: • No Charge on 13/8" and 2 " blinds Not available with 23/8" blinds
Rounded Corners: • No Charge Not available on slats with Rustic finish
Tilt Motor Pricing: • Motor unit: Add $515.00 (includes 5" receiving eye and lithium battery wand)
• Hand held remote (includes 3 AA batteries): Add $172.00
• 3 replacement alkaline AA batteries (for remote only): Add $21.00
• 10" satellite receiving eye: Add $83.00
ALL STANDARD NEWPORT WOODS DISCOUNTS APPLY TO MOTOR PRICING.
See page 18 for tilt motor details.
Decorative Tape Valance: • Add $44.00 for each valance
End Cut-Outs: • $82.00 each side (5½" or less)
• All cut outs must be approved by Comfortex Technical Service.
Blinds under 12" wide: • Add $44.00 to price of blind Not available with 23/8" blinds
Two and Three-on-One Blinds: • Add the total width of the blinds combined to price.
13
Blind Specifications Finished Blind Dimensions
13/8-Inch Blinds Inside Mount
Width Length Head Rail and Slats: ½" less than the ordered width
Standard Rectangular Min. 8"* Min 12½" Length: Ordered length
Max. 102" Max. 126" Valance: 1
/8" less than ordered width
Maximum Area (Sq. Ft.): 50
Outside Mount
Two or Three-On-One Min. 12" Min. 12½" Head Rail and Slats: Ordered width
Max. 120" Max. 126" Length: Ordered length
Valance: 1" more than ordered width
Motorization Min. 12" Min 12½"
Max. 96" Max. 96" Control Features
Maximum Area (Sq. Ft.): 50 Standard Rectangular
• Cord tilt is standard on all blinds. Tilt wand is
2-Inch Blinds available with 13/8" and 2" blinds. Please specify when
Width Length ordering.
Standard Rectangular Min. 8"* Min 12½" • Tilt wand is not available on 23/8" blinds.
Max. 102"** Max. 126" • Standard controls are tilt cord left and lift cord right.
Maximum Area (Sq. Ft.): 50
Control Position Options Minimum Width
Cordless Min. 18" Min 12½" Tilt Cord or Wand Left
Max. 78"*** Max. 84" Lift Cord Right (std) 12"
Maximum Area (Sq. Ft.): 45 Tilt and Lift Cords Grouped 181/8"
Newport Woods Basswood Blinds
Tilt Cord Center, No Lift Cord Under 12" net
Two or Three-On-One Min. 12" Min. 12½"
Max. 120" Max. 126" Standard Wand Length
Blind Length Wand Length
Motorization Min. 12" Min 12½" 12" -24" 12"
Max. 96" Max. 96" 241/8" - 40" 20"
Maximum Area (Sq. Ft.): 50 401/8" - 60" 24"
601/8" - 84" 36"
23/8-Inch Blinds 841/8"+ 48"
Width Length
Standard Rectangular Min. 12**" Min 12½" • Wand lengths up to 48" are color coordinated wood with
Max. 102" Max. 126" slats while lengths greater than 48" are clear plastic.
Maximum Area (Sq. Ft.): 50 Clear plastic wands are available in 60", 70", 78", 90" or
120". Custom wand lengths are available. Please specify
Two or Three-On-One Min. 12" Min. 12½" when ordering.
Max. 120" Max. 126"
Cordless
Motorization Min. 12" Min 12½" • The Cordless hardware option
Max. 96" Max. 96" is available for 2" blinds for a
Maximum Area (Sq. Ft.): 50 streamlined look and child
safe applications. The tilt cord
• *All blinds less than 12" in width are built with a center
control position is left only.
tilt cord and no lift cords. Center tilt is available only with
• The lift function is controlled
13/8" and 2" blinds only.
from the bottom rail.
** Center tilt is not available with 23/8" blinds.
• Cordless is not available with
• The Two or Three-on-One blinds are not available with 13/8" and 23/8" slat sizes, multiple blinds on one
the Cordless or Motorized hardware. headrail, Routeless and Tape options.
• There is a ¼" to ½" distance between blinds on two and Motorized
three-on-one blinds. • The motorized hardware option is available for all
blinds for to hard to reach applications.
• The maximum square footage for a single Standard • The tilt mechanism is controlled from the remote control.
Rectangular Newport Woods Blind is 50 square feet. • The lift function is controlled by lift cord.
The maximum square footage for a single Cordless For more information on motors see page 18.
Newport Woods Blinds is 45 square feet. Anything over
the maximum square footage should be built as a Two
and Three-on-One blinds.
14
Newport Woods Blinds Color and Characteristics Slat Styles
Even though we maintain strict quality standards, Newport Newport Woods Blinds are available with a choice of either
Woods Blinds are a true wood products and variations in rectangular or rounded corners. Rectangular corners are
color, grain, texture and warping may occur. These standard and rounded corners are available as a no-charge
characteristics are inherent to wood and in no way detract option on 13/8", 2" and 23/8" Smooth Finish Wood Blinds.
from the beauty of the blinds.
Rounded corners are not available on Newport Blinds with
To ensure color matching, it is recommended that all blinds Rustic finish.
be ordered at the same time. This will eliminate possible
variations due to paint and stain runs, although we do not Rounded Corners
guarantee exact color matches. Newport Woods Blinds are available with a choice of either
rectangular or rounded corners. Rectangular corners are
Newport Woods Blinds Color Availability standard and rounded corners are available as a no-charge
Below is a chart of the colors and slats sizes available in option on 13/8", 2" and 23/8" smooth finish slats.
the Newport Woods collection.
Rounded corners are not available on Newport Blinds with
Smooth 1⅜ " 2" 2 ⅜" Rustic finish.
Acorn NA 6123 NA
Black Sand Beach NA 7286 NA
Block Island White 138 7282 7282 238 7282 Rectangular Rounded
Cape Oak NA 6117 NA
Castle Hill White NA 7283 NA
Cinnamon NA 6135 NA
Routing Types
Newport Woods Basswood Blinds
Colonial Oak 138 6372 6372 238 6372
Cranberry Cove NA 7257 NA Routing refers to how the holes are created in the slats and
Dark Mahogany NA 7072 NA how the slats and lifting system are assembled. Standard
Hampton Harbor 138 5022 5022 238 5022 Rectangular Newport Woods Blinds are available with two
Ipswich Pine NA 7285 NA kinds of routing: Standard and Routeless. The Routeless
Mahogany 138 6125 6125 238 6125 option is not available with Cordless Blinds.
Nantucket Cottage NA 5012 NA
Newberry White NA 7281 NA
Standard Routing: Routing holes for the lift cord are drilled
Newport White 138 5502 5502 238 5502
through the center of each slat. The number of rout holes
Oyster Pond NA 5005 NA
depends on the length of the slat. The slats then rest on
Port Oak NA 6114 NA
Pristine Beach NA 5028 NA
rungs of the ladderbraid or the designer cloth tapes.
Royal Oak NA 7022 NA
Sand Dollar NA 7284 NA Routeless: Notches at the back of each slat take the place
Sand Dune NA 5030 NA of routing holes, allowing for a sleeker look and allowing
Sea Pines NA 6116 NA for improved room darkening and privacy. The slats then
Sea Shell NA 5029 NA rest on rungs of the ladderbraid.
Spice Point 138 6134 6134 238 6134
Sugar Maple NA 7012 NA The Routeless feature may cause light “puckering” of the lift
Teakwood NA 6115 NA cords on the front of the blind when the slats are tilt
Traditional Oak NA 6118 NA
backward (reverse tilt) due to interlacing cords. A gentle tug
Vermont Cherry NA 7062 NA
down on the lift cord tassel will eliminate any puckering.
Walnut 138 6133 6133 238 6133
Welfleet Maple NA 7280 NA
Rustic 1⅜" 2" 2⅜ "
Adirondack Maple NA 7002 NA
Driftwood NA 7415 NA
Seaside Cabin NA 7423 NA
Standard Routing Routeless
15
Newport Woods Valances Individual Decorative Valances
All Newport Woods Blinds come Decorative valances may be ordered individually to
standard with a valance, color upgrade or retrofit existing blinds. Please use the list below
matched to the slats with two when ordering individual valances.
returns. Refer to the Individual Valance Price Grids on pages 12-13
for pricing.
A decorative tape valance may be
ordered as alternative valance. See Valances and returns are cut from the inside to insure the
the Valance Upgrade grid on pages 12-13. most accurate fit when installed over the head rail or
window frame. See Figure 3 and 4 on this page on how to
Inside Mount Valances: measure for a custom valance and returns.
The valance is cut to the ordered blind width minus 1/8".
Maximum continuous valance is 102". Lengths over 102"
Outside Mount Valances: The valance is cut to the ordered will be spliced in the middle, the grain will not match and
blind width the ordered width plus 1". the miter will be visible. Maximum spliced valance length is
120".
Valance Returns
Three-inch returns are standard on all outside mount Smooth 3" Standard
valances, except 23/8" blinds, which have with 3¾" returns. Acorn 6123
Black Sand Beach 7286
Valance Attachment Block Island White 7282
Hidden valance clips securely attach the valance to the Cape Oak 6117
head rail. Castle Hill White 7283
Newport Woods Basswood Blinds
Cinnamon 6135
Wide and Common Valances Colonial Oak 6372
• The maximum width for a continuous valance is Cranberry Cove 7257
102". Valances over 102" will be mitered in the Dark Mahogany 7072
middle. Due to the inherent characteristics of wood, Hampton Harbor 5022
the grain will not line up at the miter and will be
Ipswich Pine 7285
visible.
Mahogany 6125
Nantucket Cottage 5012
• A Common Valance is made to cover more than one
blind to create a unified look. Exact measurements Newberry White 7281
must be supplied. The maximum width for a common Newport White 5502
valance is 120". Oyster Pond 5005
Port Oak 6114
Custom Valances and Returns Pristine Beach 5028
Custom valances and returns are available upon request. Royal Oak 7022
Valances and returns are cut at the inside measurement. The Sand Dollar 7284
inside measurement refers to the inside wall of the valance Sand Dune 5030
or the returns. See Figure 3 and 4 on how to measure for a Sea Pines 6116
custom valance and returns. Sea Shell 5029
Minimum return length is ½". Maximum return length is 6". Spice Point 6134
Sugar Maple 7012
Always make sure the width ordered is large enough to clear Teakwood 6115
the width of the head rail and brackets. Traditional Oak 6118
Vermont Cherry 7062
Walnut 6133
Outside Welfleet Maple 7280
61" Figure 3
valance Custom
Valance Rustic 3" Standard
Inside Measurements Adirondack Maple 7002
60"
Driftwood 7415
Seaside Cabin 7423
valance Figure 4
Outside Inside Custom Return
3" 21/2" Length
16
Decorative Tape Valance Option Ladderbraid and Cloth Tapes
With this option, the 1" or • Ladderbraid is standard on all Newport Woods Blinds
11/8" cloth tape is glued • Cloth tapes are optional on all Newport Woods Blinds
across the flat section of the and are available in three sizes. 1" and 11/8" tapes
valance. Refer to the accommodate 13/8", 2" and 23/8" blinds. 1½" tapes
Newport Woods Blinds accommodate 2" and 23/8" blinds.
Sample Deck to coordinate • Cloth tapes are made from a polyester and cotton blend
the wood and tape colors. The tape names available for this which resist fading and shrinking. Consult the Newport
option are listed below. The tape pattern orientation flows Woods Blinds Sample Deck for color and pattern
left to right. selections.
• A brass finish tape clamp is used on the bottom rail of
The maximum width for a valance with decorative tape all Newport Woods Basswood Blinds when cloth tapes
option is 102". are ordered.
Solid Tapes
Color Name Color Number 1" Solid Color Tapes for 2" blinds
White 832 Almond Black Cherry
Almond 835 Gold Ivy Light Cocoa
Wheat 834 Pale Cocoa Wheat White
Gold 877
Ivy 1146 1" Solid Color Tapes for 13/8" and 23/8" blinds
Cherry 821 Almond Black Cherry
Pale Cocoa 820 Gold Light Cocoa Wheat
Newport Woods Basswood Blinds
Light Cocoa 822 White
Black 823
1½" Solid Color Tapes for 2" blinds
Black Cherry Chocolate
Dark Beige Duck White Forest
Color Name Color Number Light Beige Midnight Blue Mulberry
Sage Bouquet 2202 Provence Blue Wheat Gold White
Spice Bouquet 2203
Gold Flux 2102 1½" Solid Color Tapes for 23/8" blinds
White Flux 2101 White Dark Beige
Woven Blend 3103
Tiffany Glass 2803 Decorative Tapes
Tiffany Wood 2802 11/8" Decorative Cloth Tapes for 13/8", 2" and 23/8" blinds
Royal Artisan 2902 Gold Flux Royal Artisan Sage Bouquet
Tonal Artisan 2903 Spice Bouquet Tiffany Glass Tiffany Wood
Woven Bark 3102 Tonal Artisan White Flux Woven Blend
Woven Bark
1½" Decorative Cloth Tapes for 13/8", 2" and 23/8" blinds
Ivory Accent White Accent Natural Elegance
17
Ladder and Tape Placement Newport Wood Blinds with Tilt Motors
The following tables show the number of ladderbraids or Newport Wood Blinds are
cloth tapes needed to support blinds of specific sizes. available with tilt motors. Just
point the infrared remote
Standard Rectangular and Motorized Blinds towards the blinds and press a
button to adjust the slats to
13/8" Slats open, closed and anywhere in
Blind Width # of Ladders/Tapes between. An internal limit stop
8" - 36" 2 protects the motors and slats
363/8" - 56¼" 3 from damage.
563/8" - 78¼" 4
783/8" - 100¼" 5 No special installation hardware or wiring requirements are
1003/8" - 102" 6 needed to install Newport Wood tilt motors, making them as
easy to install as they are to use.
2" Slats
Blind Width # of Ladders/Tapes The motor and battery packs are fully enclosed within the
head rail so there is nothing to detract from the beauty of
8" - 36" 2
the blind. A small infrared eye receives the commands from
361/8" - 56" 3 the remote control, which operates from up to 50 feet away
561/8" - 78" 4 and manipulates an unlimited number of blinds without the
781/8" - 100" 5 need to change channels.
1001/8" - 102" 6
• Motor unit: $515.00 (includes 5" receiving eye and
Newport Woods Basswood Blinds
23/8" Slats lithium battery wand)
Blind Width # of Ladders/Tapes • Hand held remote (includes 3 AA batteries): $172.00.
8" - 36" 2 • 3 replacement alkaline AA batteries (for remote only):
361/8" - 52" 3 $21.00.
521/8" - 72" 4 • 10" satellite receiving eye: $83.00 (to receive remote
721/8" - 92" 5 signal around draperies or other obstructions)
92 1/8" - 102" 6
Battery Life
Cordless The battery life will vary based on the type of window
2" Slats covering selected, the size and weight of the window
covering and the number of times you operate the shade on
Blind Width # of Ladders
a daily basis.
8" - 36" 2
361/8" - 56¼" 3 Comfortex does not warranty the usage life of a battery.
561/8" - 78¼" 4
781/8" - 100¼" 5 Battery Replacement
1001/8" - 102" 6 Eight lithium batteries are included with the wand.
Recommended replacement batteries are Energizer® AA
lithium. These batteries are commonly found in department
stores, home improvement centers, grocery and hardware
stores.
Battery Operated Motorized Blinds Warranty
Somfy warrants their motors and motor control systems to
be free from defects in material and workmanship under
normal and proper use for a period of five years starting
from the date stamped on the motor. Mechanical, electrical
and electronic accessories are warranted for one year from
the date of invoice. Batteries are not covered by the warranty.
18
Mounting Information End Cut Out Blinds
All slat sizes and hardware systems Comfortex Newport Woods Blinds are available with cut
• Minimum Shallow Mounting Surface 11/8" outs. There is a maximum cut out of 5¼" per side.
• Minimum Flush Inside Mounting Surface 3½"
• Minimum Outside Mounting Surface: 5
/8" • Cut out blinds have $82.00 surcharge for each side
added to the price of the blind.
• Be sure to take exact measurements for your blind with
Stack Height cut outs and to include a diagram of the window to the
Stack height refers to the thickness of the slat stack when the order form.
blind is fully raised. The following measurements include • The blind’s cut out dimensions are made with the slats
head and bottom rails. in the closed position. Always measure your cut out
blind with the slats in the closed position.
Standard Rectangular and Motorized Blinds
• Bottom cut out blinds (Figure 5) will have three bottom
13/8" Slats rails. Blinds will raise from “G” (shown in Figure 5) to
Blind Length Stack Height head rail.
48" 8¼" • Edge cut out blinds (Figure 6) will have two bottom
60" 97/8" rails.
72" 11¼" • Head rail cut out blinds (Figure 7) are controlled on
84" 12¾" the opposite side of cut out. Inside mount blinds will
96" 14¼" raise to the widest width. Outside mount blinds will
raise to the head rail.
2" Slats • A cloth tape option is available. See price grids on
Blind Length Stack Height pages 12-13 for pricing.
Newport Woods Basswood Blinds
48" 6½"
60" 7½" A
72" 8½"
84" 9½"
96" 10½" B G
23/8" Slats F
Blind Length Stack Height C D E
48" 55/8"
60" 63/8" Figure 5 Bottom Cut Out
72" 71/8"
A C D
84" 77/8"
96" 8¾" E
F
B
Cordless B
E F
2" Slats D
Blind Length Stack Height C A
48" 6½"
60" 7½" Figure 6 Edge Cut Out Figure 7 Head Rail
Cut Out
72" 8½"
84" 9½"
96" 10½"
19
Measuring Instructions for Newport Woods Blinds Newport Woods Blinds Features at a Glance
Inside Mount • All Comfortex Newport Woods Blinds are expertly
Measure across the width of the window opening in three crafted from durable basswood with a choice of slat
different places — top, middle and bottom. Measurements styles, colors and finishes.
should be taken within the window jamb.
• Add a finishing touch to Comfortex Newport Woods
Provide the smallest of the three measurements to Blinds by selecting decorative cloth tapes from an
Comfortex. Be exact. Comfortex will make the necessary extensive collection.
deductions to fit the window opening. (See Figure 8 for
assistance.) • Enjoy the ultimate in light control with the routeless
feature, which stops light leakage by eliminating cord
Measure the length of the window opening from the rout holes.
underside of the soffit to the surface of the window sill in two
places. Use the smallest of these two measurements. (See • All Comfortex Newport Woods Blinds are built on
Figure 8 for assistance.) strong, slimly designed head rail which supports even
the largest blind while minimizing the stacking height.
Outside Mount
Measure the exact width and length of the area to be • A decorative valance comes standard on all Comfortex
covered. On the width, allow at least 2" of an overlap on Newport Woods Blinds. The elegant design conceals
each side. An overlap of 3" on each side is recommended. the head rail while eliminating any light gaps between
the head rail and top slats.
Be sure to take into consideration any obstructions such as
window trim, molding, locks and cranks. (See Figure 8 for • Select from traditional rectangular corners on the
Newport Woods Basswood Blinds
assistance.) basswood slat or the smooth, rounded corners for a
softer touch.
SOFFIT
• Comfortex Newport Woods Blinds are available with a
INSIDE Cordless or Motorized hardware system for maximum
versatility and easy operation.
OUTSIDE
INSIDE
JAMB
• To cover large windows, multiple blinds may be
mounted on one head rail.
INSIDE
OUTSIDE
• Comfortex Newport Woods Blinds can be customized
SILL
with a tilt wand or tilt cord for operating convenience.
Figure 8 • Woodwork, fixtures and other obstructions can be
accommodated with cutouts in the Newport Woods
Blinds slats.
• A Limited Lifetime Warranty serves as our commitment
to your satisfaction.
20
Woodwinds® Specialty Shapes
Starburst Louvers and Sunset Slats
Starburst Sunset
Style Price Per Inch Style Price Per Inch
Half Circle Half Circle
Eyebrow Eyebrow
Quarter Circle Quarter Circle
Elongated $24.00 Elongated $13.00
Raked Top Raked Top
Inserted $26.00 Inserted $13.50
Bullet Shaped $28.35 Bullet Shaped $14.60
Full Circle, Oval Full Circle, Oval
Hexagon, Octagon $38.50 Hexagon, Octagon $21.00
Pricing Templates are required on all Inside Mount (IB) Specialties
For a complete visual listing of available Specialty Shapes, except perfect Half Circle Arches and perfect Quarter
see page 22. Circles. See pages 25-27 for information on creating
templates for every Woodwinds Specialty style.
All Woodwinds Specialty Shapes are priced per inch across
the widest point, either width or height. All Woodwinds Specialties are painted to match other
Woodwinds products and are available in the following
• Minimum size: 20" at the widest point, 10" at highest colors:
point
• Maximum width: 96" at widest point Plantation Shutter Colors 7004 Piccolo
• Items with center height <25% of width at the widest 7008 Bolero
point: add $5.20 per inch for Starburst Specialties and 7028 Clarinet
$3.12 per inch for Sunset Specialties.
• Retail pricing does not include freight. See page 36 for Wood Alloy Blind Colors 7050 Flute
the Comfortex freight policy concerning Woodwinds 7000 Oboe
Specialties. 7005 Cornetta
Examples: 7010 Bassoon Woodwinds Specialty Shapes
7020 Ocarina
7030 Pan Pipe
45"
A copy of the Woodwinds Specialty Shapes Order Form
20"
(stock number 513100OF) can be found on pages 33-34 of
this price list. Additional order forms (in packs of 50) may be
40" 40" purchased by calling Comfortex Customer Service at 800-
843-4151 or ordered online at www.comfortex.com. A file
Price at 40". Price at 45". of this document may also be downloaded at
www.comfortexdealers.com.
21
General Information Sunset
Woodwinds Specialty Shapes have been created to • Parallel, stationary slats make Sunset
accommodate today's architectural windows with classic, Specialties a fitting complement when
durable beauty. Every shape is crafted with the same quality paired with Woodwinds Wood Alloy Blinds
and detail as Woodwinds Blinds for a complete, unified look and Plantation Shutters.
on even the most elaborate window ensembles. • Sunset Specialties are available with a
• Each Woodwinds Specialty Shape is made from fixed 2" flat slat tilted back to help block
durable composite materials for superior strength and direct sunlight.
moisture resistance. • Most Woodwinds Specialty Shapes are
• All Woodwinds Specialties arrive painted and ready to available in the Sunset slat design.
install. A triple-coat finish ensures years of durability: Inserted Specialties are only available
sealant, primer, paint. with Starburst louvers.
• Specialty Shapes are available in the following
Woodwinds white and off-white colors:
Plantation Shutter Colors - 7004 Piccolo, 7008 Bolero,
Woodwinds Specialty Shapes Styles
7028 Clarinet Woodwinds Specialty Shapes come in the following styles:
Wood Alloy Blind Colors - 7050 Flute, 7000 Oboe,
7005 Cornetta, 7010 Bassoon, 7020 Ocarina,
7030 Pan Pipe
Bullet Shaped Quarter Circle
Starburst Sunset
Woodwinds Specialty Shapes Slat Design
Starburst
• Graduated Starburst Specialty louvers "radiate" from a Half Circle Inserted
central point for a dramatic visual effect.
• Starburst frames contain movable louvers which pivot
as shown (tilted back) individually for versatile light
control and privacy.
• In order for Starburst louvers to fully operate, 3" of
clearance is needed between the window and the Elongated Eyebrow
Specialty Shape.
• Spring-loaded slats are easily removed for installation
and may be replaced in the rare case one gets
broken. Also
• Full Circle, Oval, Hexagon and Octagon Starburst available:
Specialties feature a unique "floating hub" which holds Full Circle
slats firmly in position.
• Louver sizes on Starburst Specialties vary to Oval
accommodate each shape exactly. Each louver is
Woodwinds Specialty Shapes
custom crafted for a precise fit.
• All Woodwinds Specialty Shapes are available in the
Also
Starburst Style. Inserted Specialties are only available available:
with Starburst louvers. Octagon
Hexagon
Raked Top Raked Top
(Symmetrical) (Asymmetrical)
22
Mounting Inside Mount without Rabbet: The
All Woodwinds Specialties have a Woodwinds Specialty is mounted
beaded edge detailing which on the inside of the window
blends with all Woodwinds Blind frame. This mounting type does
and Plantation Shutter designs. not include a rabbet along any
The beading is similar to that portion of the perimeter. This
found on the Standard Z-Frame application is not commonly
and Standard L-Frame for recommended because it requires
Plantation Shutters. more finishing work. A 1/8" factory
deduction is taken from each side
Window The possible mounting of the Woodwinds Specialty
scenarios are listed except the bottom side (Figure
Wall below. The term rabbet is Figure 11 11). A bead of caulk or rubber
WW mentioned several times. weather stripping should be used
Specialty A rabbet is a 1" flange to conceal any light gaps and provide aesthetic finishing.
which extends out from These items are NOT supplied by Comfortex Window
the edges of the Fashions, but may be purchased at any hardware store or
Rabbet/Flange Woodwinds Specialty to home center.
create a built-in Z-frame
around the perimeter. The extra 1" gives the specialty a
Outside Mount (OB): The
clean, finished look while allowing for a precise fit within the
Woodwinds Specialty is
window opening. The rabbet is appropriate for openings
mounted on the outside of the
with drywall casements or wood casements. Be aware that
window frame. This mounting
the flange will cover a portion of the area surrounding the
type does not include a rabbet
opening.
along the perimeter (Figure
12). This application is ideal
If mounted over an Inside Mount (IB) Shutter, be sure to
for openings where there is
indicate frame style so the flange can be custom sized to
less than 1" in mounting depth
match the shutter frame width (see photo at right).
or obstructions prevent an
inside mount. OB Specialties
Inside Mount with Rabbet:
can be mounted on top of
The Woodwinds Specialty is mounted on Figure 12
molding or just beyond
the inside of a window frame without
molding (Figure 13). A 1"
molding or trim. A 1" rabbet surrounds
overlap is suggested on all sides of the window opening. Be
the Woodwinds Specialty in one of the
sure to include the additional overlap in all of your OB
following ways:
Specialty measurements. Screws for this application are
inserted through the face of the Specialty Shape. Caulk
• The rabbet surrounds all sides except the bottom edge
and/or wood filler is required for finishing, as is touch-up
for applications where a shutter or blind is installed
paint (Figure 14). These items are NOT supplied by
directly below the Woodwinds Specialty. The shutter or
Comfortex Window Fashions, but may be purchased at any
blind butts up directly against the bottom edge. A ¼"
hardware store or home center.
factory deduction is taken from all sides except the
bottom side. (Figure 9)
• The rabbet surrounds the entire perimeter
Woodwinds Specialty Shapes
in applications where the Specialty Shape stands alone
within a single window opening where no additional
treatment is installed directly below it. (Figure 10).
Figure 13 Figure 14
Figure 9 Figure 10
23
Templates Creating the Perfect Template
All Inside Mount (IB) orders, except for perfect Half-Circles Tape a sheet of brown craft paper over the window opening.
and perfect Quarter Circles, require paper templates. Be sure to allow plenty of overlap and check to see that the
Outside Mount (OB) orders do not require a template. For paper is smooth and pulled taut. Do not use newspaper as
OB orders, Comfortex asks you to supply a sketch of the it rips easily. Do not use paper that has been folded. Notice
window with labeled measurements on in the space the outline of the framework superimposed on the template
provided on the Woodwinds Specialty Shapes Order Form. as the light filters though the window. You may create the
See Creating the Perfect Template on this page for template in one of two ways.
instructions on creating a template correctly. Be sure to
record the measurements of the window opening directly on Trace the outline of the window with a
the template in addition to any drawing supplied on the pencil and continue along the side of
Woodwinds Specialty Shapes Order Form. the window frame. Once the window
is completely traced, remove the craft
Arches and Quarter Circles paper from the window. Cut out the
• A template is not required for OB mounts. Remember traced shape with a pair of scissors.
to overlap the outside edge of the window on all sides You may choose to skip tracing the window outline with a
by at least 1". The desired amount may exceed 1". pencil and cut out the shape immediately with a razor knife.
• For IB mounts, measure the exact width and height
inside the window opening. Once your template is cut, double check the width and
• Measure the height at the tallest point. height and with your initial measurements. Test the template
• For perfect IB Half Circle arches, the height will be by placing it in the window. Check for
one half the width. For perfect IB Quarter Circles, the light gaps, uneven cutting of curves, CUT
etc. Trim or remake if necessary.
HER
height will equal the width. If the arch or Quarter E
Circle has a perfect radius, a template is not required.
• Windows with imperfect arch measurements or those of With Woodwinds Specialty Arches,
the Eyebrow, Elongated or Bullet-Shaped styles do not fold the template in half. Check the
maintain the width-height relationship. Take care to outline of the curve for smoothness, light gaps and curve
measure the windows according to the instructions on continuity. Place the Fold over Check symmetry of curve
page 25 and while making templates. template in the window
and check it for light
Full Circles and Ovals gaps or uneven cutting
• A template is not required for OB mounts. Remember of curve. Trim or
to overlap the outside edge of the window on all sides remake it if necessary.
by at least 1". The desired amount may exceed 1".
• For IB mount Oval or Full Circle Specialties, measure REMEMBER, THE QUALITY OF THE FINISHED SPECIALTY FIT
the exact width and height inside the window opening. CAN ONLY BE AS GOOD AS THE QUALITY OF THE
For IB Full Circles, the width will equal the height. TEMPLATE FIT. Do not hesitate to remake a template if you
• Windows that are not perfect Full Circles do not feel uncomfortable with the quality of the first attempt.
maintain the width-height relationship. Take care to On the front of the template, mark the shade measurements
measure the windows according to the instructions on along with your company name, Comfortex account
page 26 and while making templates. number, sidemark, Woodwinds Specialty Style and color. Be
sure to indicate the room side and which ends of the
Hexagons and Octagons template are top and bottom. Do not take any deductions on
• A template is not required for OB mounts. Remember inside mount shades. The factory will make all necessary
to overlap the outside edge of the window on all sides allowances for inside mounts.
Woodwinds Specialty Shapes
by at least 1". The desired amount may exceed 1".
• Take care to measure the windows according to the Template Kits: Comfortex offers template kits which include
instructions on page 27 and while making templates. brown craft paper, razor knife, instructions and order form.
Please contact Customer Service or visit www.comfortex.com
Raked Top to order. Stock number: 751000
• A template is not required for OB mounts. Remember
to overlap the outside edge of the window on all sides
by at least 1". The desired amount may exceed 1".
Please consult the measuring instructions on page 27
for each individual Woodwinds Specialty style for
specifics regarding accurate measurements and
mounting information.
• Take care to measure the window according to the
instructions on page 27 and while making templates.
24
Measuring - Starburst and Sunset Specialty Shapes Eyebrow: IB Mount (Figure 17)
For Starburst and Sunset Specialty Shapes, follow the same • Measure the exact width (at the widest point) and
procedures. height (at the highest point) inside the window
opening.
Half Circle Arch, Quarter Circle, Elongated Arch, Bullet- • Measure the exact height of the left and right sides
Shaped Arch: IB Mount (Figure 15) within the window opening.
• Measure the exact width (at the widest point) and • All IB Eyebrow Arches require a template. For
height (at the highest point) inside the window instructions on making a template, see page 24.
opening. • Be sure to indicate on the Woodwinds Specialty Order
• For perfect Half Circle Arches, the height will be one Form whether or not the Eyebrow will have a rabbet.
half the width. For perfect Quarter Circles, the height If so, be sure to indicate if there should be a rabbet
will equal the width. If the Half or Quarter Circle is along the bottom edge.
perfect, a template is not required. For instructions on • A ¼" factory deduction is taken from each side of the
making a template for imperfect Half and Quarter Specialty except the bottom to accommodate fit
Circles, see page 24. and the 1" rabbet.
• Be sure to indicate on the Woodwinds Specialty • If the Specialty does not have a rabbet, a 1/8"
Shapes Order Form whether or not the Specialty will deduction is taken for a tighter fit inside the window
have a rabbet. If so, be sure to indicate if there should opening.
be a rabbet along the bottom edge. • Be sure to record all measurement information on the
• A ¼" factory deduction is taken from each side of the Woodwinds Specialty Shapes Order Form as well as
Specialty except the bottom to accommodate fit and the template.
the 1" rabbet.
• If the Specialty does not have a rabbet, a 1/8" Figure 17
deduction is taken for a tighter fit inside the window
opening.
• Be sure to record all measurement information on the Height
Side Height
Woodwinds Specialty Shapes Order Form as well as Side Height
the template.
Figure 15 Width
Perfect
Imperfect
Height Eyebrow: OB Mount (Figure 18)
Height • Measure the exact width (at the widest point) and
height (at the highest point). Make sure to add at
least 1" to the width and height measurements to
Width
Width provide adequate overlap and coverage. It is best if
Half Circle, Quarter Circle, Elongated Arch, Bullet-Shaped any existing window molding is removed.
Arch: OB Mount (Figure 16) • Measure the exact height of the left and right sides
• Measure the exact width (at the widest point) and outside the window opening.
height (at the highest point). Make sure to add at • Be sure to indicate "OB Mount" on the Woodwinds
least 1" to the width and height measurements to Specialty Order Form.
provide adequate overlap and coverage. It is best if • OB Eyebrow Specialties are made to the exact size
any existing window molding is removed. ordered.
• For perfect Half Circle arches, the height will be • Be sure to record all measurement information on
one half the width. For perfect Quarter Circles, the the Woodwinds Specialty Shapes Order Form.
height will equal the width.
Woodwinds Specialty Shapes
• Be sure to indicate "OB Mount" on the Woodwinds Figure 18 at least 1"
Specialty Order Form.
• OB Half Circles, Quarter Circles, Elongated Arches
and Bullet-Shaped Arches are made to the exact Height
size ordered. Side Height Side Height
• Be sure to record all measurement information on
the Woodwinds Specialty Shapes Order Form. at least 1"
Width
Figure 16
Perfect
Imperfect
Height
Height
Width
Width
25
Inserted: IB Mount (Figure 19) Full Circle and Oval: IB Mount (Figure 21)
• Measure the exact width and height inside the window • Measure the exact width (at the widest point) and
opening. The inserted arch shape will be crafted based height (at the highest point) inside the window
on these measurements. A template is not required. opening.
• Be sure to indicate on the Woodwinds Specialty Order • If the height equals the width, you have a Full Circle.
Form whether or not the Specialty will have a rabbet. If If the width and height vary, you have an Oval. A
so, be sure to indicate if there should be a rabbet template for IB Full Circles is not required, but is
along the bottom edge. required for IB Ovals. For instructions on making a
• A ¼" factory deduction is taken from each side of the template, see page 24.
Specialty to accommodate fit and the 1" rabbet. • Be sure to indicate on the Woodwinds Specialty
• If the Specialty does not have a rabbet, a 1/8" Shapes Order Form whether or not the Specialty will
deduction is taken for a tighter fit inside the window have a rabbet.
opening. • A ¼" factory deduction is taken around the
• Be sure to record all measurement information on the circumference of the Oval or Circle to accommodate
Woodwinds Specialty Shapes Order Form. fit and the 1" rabbet.
• If the Specialty does not have a rabbet, a 1/8"
Figure 19 deduction is taken for a tighter fit inside the window
opening.
• Be sure to record all measurement information on the
height
height Woodwinds Specialty Shapes Order Form as well as
the template.
Figure 21 height
height
width
width
width
width
Inserted: OB Mount (Figure 20)
• Measure the exact width (at the widest point) and height
(at the highest point). Make sure to add at least 1" to
the width and height measurements to provide
adequate overlap and coverage. It is best if any
existing window molding is removed. Full Circle and Oval: OB Mount (Figure 22)
• The Inserted arch shape will be crafted based on these • Measure the exact width (at the widest point) and
measurements. A template is not required. height (at the highest point). Make sure to add at least
• Be sure to indicate "OB Mount" on the Woodwinds 1" to the width and height measurements to provide
Specialty Order Form. adequate overlap and coverage. It is best if any
• Inserted Arches are made to the exact size ordered. existing window molding is removed.
• Be sure to record all measurement information on the • If the height equals the width, you have a Full Circle. If
Woodwinds Specialty Shapes Order Form. the width and height vary, you have an Oval.
• Be sure to indicate "OB Mount" on the Woodwinds
Figure 20 at least 1"
Specialty Shapes Order Form.
• Full Circles or Ovals are made to the exact size
ordered.
• Be sure to record all measurement information on the
height
height
Woodwinds Specialty Shapes Order Form.
Woodwinds Specialty Shapes
Figure 22 height
at least 1" at least 1"
width
width
width
at least 1"
26
Hexagon and Octagon: IB Mount (Figure 23) Raked Top: IB Mount (Figure 25)
• Measure the exact width (at the widest point) and • Measure all sides individually along the inside of the
height (at the highest point) inside the window window. Record all side measurements on the template
opening. as well as the Woodwinds Specialty Shapes Order
• Measure the length of one side and record it on the Form.
template as well as the Woodwinds Specialty Shapes • Templates are required for IB Raked Top Specialties.
Order Form. For instructions on making a template, see page 24.
• Templates are required for IB Hexagons and IB • Make sure your template measurements match the
Octagons. For instructions on making a template, see measurements taken from the window opening.
page 24. • Be sure to indicate on the Woodwinds Specialty Shapes
• Make sure your template measurements match the Order Form whether or not the Raked Top Specialty
measurements taken from the window opening. will have a rabbet. If so, be sure to indicate if there
• Be sure to indicate on the Woodwinds Specialty Order should be a rabbet along the bottom edge.
Form whether or not the Hexagon or Octagon • A ¼" factory deduction is taken from each side of the
Specialty will have a rabbet. Specialty except the bottom to accommodate fit and
• A ¼" factory deduction is taken from each side of the the 1" rabbet.
Specialty to accommodate fit and the 1" rabbet. • If the Specialty does not have a rabbet, a 1/8"
• If the Specialty does not have a rabbet, a 1/8" deduction is taken for a tighter fit inside the window
deduction is taken for a tighter fit inside the window opening.
opening. • Be sure to record all measurement information on the
• Be sure to record all measurement information on the Woodwinds Specialty Shapes Order Form as well as
Woodwinds Specialty Shapes Order Form as well as any template.
the template.
Figure 23 height
Figure 25
A
Slope
Angle
D
width
B
Be sure to indicate
which side is the
short side.
C
Raked Top: OB Mount (Figure 26)
Hexagon or Octagon: OB Mount (Figure 24) • Measure the exact width (at the widest point) and
• Measure the exact width (at the widest point) and height (at the highest point). Make sure to add at
height (at the highest point). Make sure to add at least 1" to the width and height measurements to
least 1" to the width and height measurements to provide adequate overlap and coverage. It is best if
provide adequate overlap and coverage. It is best if any any existing window molding is removed.
existing window molding is removed. • Be sure to indicate "OB Mount" on the Woodwinds
• Be sure to indicate "OB Mount" on the Woodwinds Specialty Order Form.
Specialty Order Form. • OB Raked Top Specialties are made to the exact
• OB Hexagon or Octagon Specialties are made to size ordered.
the exact size ordered. • Be sure to record all measurement information on
Woodwinds Specialty Shapes
• Be sure to record all measurement information on the Woodwinds Specialty Order Form.
the Woodwinds Specialty Shapes Order Form.
Figure 26 A
A
Figure 24 height Slope
at least 1"
Angle
at least 1"
D
D
B
Be sure to indicate B
which side is the
width
short side.
C
C
27
IMPORTANT! Woodwinds Specialties Shapes Features
When measuring window ensembles for Woodwinds Shutter at a Glance
Specialties, please be sure that there is enough space • Woodwinds Specialty Shapes add dimension to
around the window openings to accommodate Specialty today's geometric accent windows: arches, ovals,
flanges or the overlap of OB Specialties. If separate flanges octagons and trapezoids.
or frames butt up next each other, double check the meas-
urements to make sure there is enough room to fit both • Every Specialty Shape is crafted with the same quality
pieces (Figure 27). and detail as Woodwinds Blinds and Plantation
Shutters for a complete, unified look on even the most
Figure 27 elaborate window ensembles.
• Choose from the fixed, horizontal Sunset slats or
movable custom louvers in the Starburst designs.
• A rabbet (flange) option allows for the most precise fit
within inside mount openings.
• All Woodwinds Specialties arrive painted and ready to
install.
• The slat core material matches the outer cap color so
exposed edges are inconspicuous and do not require
additional painting or touch-ups.
• Like Woodwinds Plantation Shutter louvers, individual
Specialty louvers can be easily removed and replaced.
• Specialty Shapes are available in an assorted collection
of Woodwinds whites and off whites to match
Woodwinds Blind and Plantation Shutter colors.
• A Limited Lifetime Warranty serves as our commitment
to your satisfaction.
Woodwinds Specialty Shapes
28
Cleaning and Care of Newport Woods Conditions of Sale
Basswood Blinds All Comfortex products are custom fabricated to your exact
Basswoods Blinds should be dusted regularly. Use a soft, specifications. We cannot accept responsibility for errors in
clean cloth, dusting mitt, feather duster, vacuum cleaner with ordering or cancellations and changes after the order is in
brush attachment, compressed air or hair dryer (non-heat production.
General Information
setting) or cylindrical dust brush especially designed for
blinds. Lower the blind to its full length, then tilt the slats Policies
almost fully closed and dust. Then do the reverse side of the Our policies are designed to provide a guide for doing
slats in the same manner. To reach the dust where the slats business with Comfortex. Our first priority and number one
overlap, it is best not to fully close the blind in either position. policy is to provide the highest level of service and total
satisfaction.
Cleaning and Care of Woodwinds Blinds and
Specialty Shapes Freight
Basswoods and Woodwinds Blinds
Periodic dusting with a feather duster or vacuum cleaner
On orders for fabricated shades and blinds, our standard
brush is all Comfortex Specialty Shapes should ever require.
policy is to ship freight free via UPS Ground within the
The exterior finish on Comfortex Specialty Shapes resists
continental United States. Shipments to Hawaii will incur a
chipping, cracking and fading. If necessary, the surface can
per order freight charge of $65.00 for Oahu and $100.00
be cleaned with mild soap and a damp sponge to remove
for all neighboring islands. Boxed shades, track, or vanes
stains.
that do not meet the UPS size and weight requirement will
While Woodwinds Specialties resist humidity and moderate
ship common carrier. In addition, a per unit transportation
moisture, they should never be fully submerged in water.
surcharge will be added to all fabricated product orders. See
Freight Policy on www.comfortexdealers.com for more
Periodic dusting with a feather duster or vacuum cleaner
details.
brush is all Woodwinds Blinds should ever require.
Woodwinds Blinds resist chipping, cracking, fading and is
Specialty Shapes
inherently dust repellent. If necessary, Woodwinds Blinds can
Comfortex will ship all orders for Comfortex Specialty
be cleaned with soap and water to remove stains.
Shapes via UPS Ground or other similar method for $10.00
Woodwinds Blinds are fully washable and will not warp if
per Specialty Unit within the continental United States,
exposed to water or humid conditions. PLEASE DO NOT
$15.00 a unit shipped to Hawaii and Alaska. The freight
SUBMERGE HEAD RAILS CONTAINING TILT MOTORS. The
charges will be added to the order invoice upon shipment.
water will damage, and subsequently ruin the motor
See Freight Policy on www.comfortexdealers.com for more
electronics.
details.
Child Safety Note: Comfortex reserves the right to select another carrier,
Be aware that it is possible for children to become entangled modify shipping terms or change freight policies without
in window covering cords. To reduce the risk of accidents, all notice.
cords must be kept out of the reach of children.
Service and Repair: Service may be obtained by contacting
A cord cleat is an effective way to implement this essential our Customer Service Department. No products, parts,
precaution. Cord cleats are available upon request. Please components or other materials will be authorized for return
use them. or repair without prior approval from Comfortex. A Return
Authorization (RA) may be obtained by contacting our
To mount the cord cleat at a safe height, take into account Technical Service Department. In order to provide the
furniture or other objects upon which a child may climb. quickest service possible, please have your Comfortex Work
Then, after the use of the shade, simply wrap the excess cord Order number and original order information available
around the cleat. when you call.
Woodwinds and Newport Woods Blinds utilize a break-away Specifications: All Comfortex products are designed and
equalizer which comes apart when force is applied from the tested to perform as intended within established, published
top. This helps to alleviate an emergency situation if a child parameters. Requests for “custom fabrication" of products
does become entangled. However, no safety system is fail- outside of our published specifications may be considered,
safe. It is still recommended to keep cords out of reach of but are at the discretion of the Comfortex Technical Services
small children and pets. department. Restrictions and additional charges apply.
Download installation instructions, order forms or additional
price list copies at www.comfortexdealers.com. The files can
be found in the For Our Dealers section.
29
Battery Operated Motorized Blinds Warranty Basswoods Blinds, Woodwinds Wood Alloy Blinds
Somfy warrants their motors and motor control systems to and Woodwinds Specialty Shapes Warranty
be free from defects in material and workmanship under Information continued
normal and proper use for a period of five years starting This warranty gives you specific legal rights, and you may
from the date stamped on the motor. Mechanical, electrical
General Information
also have other rights, which vary from state to state. Policy
and electronic accessories are warranted for one year from is subject to change without notice.
the date of invoice. Batteries are not covered by the warranty.
This limited warranty is exclusive of commercial use. Contact
Newport Woods Basswood Blinds, Woodwinds Comfortex Technical Service for more information. No
Wood Alloy Blinds and Woodwinds Specialty agent, representative, dealer or unauthorized employee has
Shapes Warranty Information the authority to increase or alter the obligation of this
Comfortex warrants that its window treatments will be free warranty.
from defects in materials and workmanship for as long as
the original residential purchaser owns the product, provided This limited warranty supersedes any previous versions.
that the product was installed properly and in accordance
with the installation instructions. The limited lifetime warranty
is extended to the original residential purchaser only, in the
original window for which it was installed.
The warranty does not include any conditions or damages
resulting from accidents, alterations, misuse, misapplication,
improper handling, installation, repairs, operation or
cleaning, environmental or acts of nature. This warranty
does not cover variation in color, grain, or texture in natural
wood products nor excessive warping of wood slats in high
humidity areas. Normal wear and tear is not covered.
All moving parts, such as cords, will eventually wear out.
Comfortex considers these things as normal wear and tear
and will carry a three year limited warranty.
This limited warranty does not cover transportation costs to
and from the retailer, costs of removal, re-measure, or
reinstallation of product, or any incidental or consequential
damages.
If a Comfortex product is found to be defective in materials
or workmanship, we will, at our discretion, repair, replace
or refund the cost of a product which fails to conform to this
limited warranty. Colors vary from lot to lot and may not
exactly match sample swatch, sample book, or previous
purchases. Discontinued components or color selections will
be replaced with the closest equivalent current product. This
shall be your sole remedy under this limited warranty.
To obtain service, contact the dealer from whom you
purchased the product.
This warranty is exclusive and in lieu of all other obligations,
liabilities or warranties. In no event shall Comfortex or its
licensed fabricators or distributors be liable for incidental or ©2009 COMFORTEX CORPORATION
consequential damages or for any other damage, loss or ™ is a trademark of Comfortex Corporation.
®
is a registered trademark of Comfortex Corporation.
expense, cost or fee associated with such damage. In some
Woodwinds® is a registered trademark of Comfortex Corpora-
states, exclusions for incidental or consequential damages tion. Reed™, S-Curve™ and Plantation ShutterBlind™ are trade-
are not allowable. marks of Comfortex Corporation.
Energizer® is a registered trademark of Energizer Holdings, Inc.
Woodwinds Wood Alloy Blinds are covered by U.S. Patent Nos.
Des 409,869, 5,957,183 and 6,083,601.
U.S. and foreign patents pending. All rights reserved.
30
Customer Service (800) 843 - 4151
®
Woodwinds Order Fax (800) 336 - 4580
Web Site www.comfortex.com
W O O D A L LOY B L I N D S
Company Name: _______________________ Acct #_____________ Company Name: _______________________ Acct #_____________ .O.
P #: _______________
Address:__________________________________________________ Address:__________________________________________________ Side Mark: ___________
City / State / Zip___________________________________________ City / State / Zip___________________________________________ Contact: _____________
BILL TO
SHIP TO
Phone: ___________________________________________________ Phone: ___________________________________________________ Date: ________________
Fax Number: ______________________________________________ Fax Number: ______________________________________________
Check
Check Tilt for
column Lift Style Tilt Shallow Two On Three On
for Ladderbraid, Mount Position Wand/ Position Custom Custom Mount One One
Routeless or Cloth Tape Inside Left Cord Left Valance Return Valance Headrail Headrail
Qty option Tapes* Color # Width Length Slat Color # Outside Right Motor ** Right Width Size *** Yes/No Yes/No
LB CT I B OB L R W C M L R Y N Y N
LB CT I B OB L R W C M L R Y N Y N
LB CT I B OB L R W C M L R Y N Y N
LB CT I B OB L R W C M L R Y N Y N
* Routeless blinds, Beveled and Plantation ShutterBlinds are not available with cloth tapes. ** Tilt wand is standard on all Woodwinds except on Beveled and Plantation ShutterBlinds (cord tilt
standard). *** Shallow Mount Valances are only available with inside mount blinds.
Comfortex Cloth Tape Color Selections Special Instructions
1½" Solid Tapes for Reed and S-Curve Blinds
11/8" and 1½" Patterned Tapes for Reed and Color Color# Color Color#
S-Curve Blinds White 8005 Duck White 8112
Color Color# Color Color# Light Beige 8036 Dark Beige 8093
White Flux 2101 Gold Flux 2102 Forest 8881 Provence Blue 8878
Sage Bouquet 2202 Spice Bouquet 2203 Midnight Blue 8879 Black 8055
Tiffany Wood 2802 Tiffany Glass 2803 Wheat Gold 8877 Mulberry 8615 Valance Information
Royal Artisan 2902 Tonal Artisan 2903 Cherry 8092 Chocolate 8062 Standard IB Valance: 1/8" less than the ordered blind width.
Woven Bark 3102 Woven Blend 3103 Standard OB Valance: 1¼" wider than the ordered blind width on the inside measure-
Natural Elegance 0902 White Accent 0910
1" Solid Tapes for Reed and S-Curve Blinds
Color Color# Color Color# ment of the valance. Standard returns are 3" at the inside measurement.
Ivory Accent 0911 White Elegance 0901
White 0832 Almond 0835 Shallow Mount Valance: ¾" greater than ordered blind width. Standard returns are 5/8"
Natural 0834 Light Cocoa 0822 at the inside measurement. Shallow mount valances attach to headrail with hidden
Black 0823 Gold 0877 valance clips.
Pale Cocoa 0820 Cherry 0821
Ivy 1146 For detailed valance measurement information, see the Woodwinds Blind Price List.
Shipping Charges - The freight on all blind orders within size and weight limitations of UPS will be prepaid. The freight will be paid on common shipment orders of three blinds or more. Boxed
shades, track, or vanes that do not meet the UPS size and weight requirement will ship common carrier. There will be a direct common carrier fee of $40.00 for each order that requires this mode
of transportation. A per unit transportation charge will be added to all orders. See Freight Policy on www.comfortexdealers.com for more details.
Customer Signature ____________________________________________ Date ____/____/____ Measured By__________________________________Date ____/____/____
511601OF rev. 03/08
Customer Service (800) 843 - 4151
Newport Woods Order Fax (800) 336 - 4580
Web Site www.comfortex.com
B a s sw o o d B L I N D S
Company Name: ______________________ Acct #: ____________ Company Name: ______________________ Acct #: ____________ .O.
P #: _______________
Address: ________________________________________________ Address: ________________________________________________ Side Mark: ___________
City / State / Zip: _________________________________________ City / State / Zip: _________________________________________ Contact: _____________
BILL TO
SHIP TO
Phone: _________________________________________________ Phone: _________________________________________________ Date: ________________
Fax Number: ____________________________________________ Fax Number: ____________________________________________
Other Options Multiple
Routeless Blind on Additional
Rounded Lift Tilt One Head Hardware
Corners Mount Tilt Style Position Position Rail Hold Down
Color Cordless Tape Inside Wand* or Left or Left or 2 on 1 Extension
Qty Color # Name Width Length Motorization Color Outside Cord Right Right 3 on 1 Spacers
A R RC C M I O W C L R L R 2 3 H E S
B R RC C M I O W C L R L R 2 3 H E S
C R RC C M I O W C L R L R 2 3 H E S
D R RC C M I O W C L R L R 2 3 H E S
E R RC C M I O W C L R L R 2 3 H E S
F R RC C M I O W C L R L R 2 3 H E S
* Wand option is not available with 23/8" slat blinds.
Multiple Blinds on One Head Rail Special Instructions
Left Left Right Right Center Center
Control Control Control Control Control Control
Lift Tilt Lift Tilt Lift Tilt
Mount Tilt Style Position Position Position Position Position Position
Overall Overall Inside Wand* Left Left or Left or Right Left or Left or Center Left or Left or
Line Qty Width Length Outside or Cord Width Right Right Width Right Right Width Right Right
I O W C L R L R L R L R L R L R
I O W C L R L R L R L R L R L R
I O W C L R L R L R L R L R L R
I O W C L R L R L R L R L R L R
* Wand option is not available with 23/8" slat blinds. Center blind measurement applies only with 3 on 1 blinds.
Shipping Charges - The freight on all blind orders within size and weight limitations of UPS will be prepaid. The freight will be paid on common shipment orders of three blinds or more. Boxed
shades, track, or vanes that do not meet the UPS size and weight requirement will ship common carrier. There will be a direct common carrier fee of $40.00 for each order that requires this mode
of transportation. A per unit transportation charge will be added to all orders. See Freight Policy on www.comfortexdealers.com for more details.
Customer Signature ____________________________________________ Date ____/____/____ Measured By____________________________________ Date ____/____/____
514200OF 11/08
®
Woodwinds Specialty Shapes Customer Service (800) 843 - 4151
Order Fax (800) 336 - 4580
CUSTOM WOOD ALLOY SHUTTERS www.comfortex.com
.O.
P #: __________________
Company Name: _____________________ Acct #: ___________ Company Name: _____________________ Acct #: ___________
Side Mark: _______________
Address: ________________________________________________ Address: ________________________________________________
Dealer Contact: __________
City / State / Zip: ________________________________________ City / State / Zip: ________________________________________
Date: ____________________
BILL TO
SHIP TO
Phone:__________________________________________________ Phone: _________________________________________________
A KEY TO THIS ORDER FORM IS LOCATED ON THE BACK OF THIS FORM. PLEASE CIRCLE OR WRITE YOUR ANSWERS CLEARLY IN THE BOXES PROVIDED.
ORDER FORMS THAT ARE NOT FILLED OUT CORRECTLY AND COMPLETELY, AND THOSE WITHOUT A SIGNATURE, WILL NOT BE PROCESSED.
1 2 3 4 5 6 7 8 9 10 11 12
Eyebrow Eyebrow
Shutter Right Side Left Side Bottom
Qty Slat Design Style Color Width Length Mount Frame Mount Length Length Rabbet Template
A STAR SUN I O N N Z X L Y N Y N
B STAR SUN I O N N Z X L Y N Y N
C STAR SUN I O N N Z X L Y N Y N
D STAR SUN I O N N Z X L Y N Y N
E STAR SUN I O N N Z X L Y N Y N
(13) Please draw a diagram of each Woodwinds Specialty in the corresponding box below. Be sure to include all details and measurements.
Special Instructions and Diagrams Please note: These illustrations DO NOT take the place of templates! See the Comfortex Shutter Price List for template information.
Specialty A Specialty B Specialty C Specialty D
Freight and Packaging Surcharge: Comfortex will ship all orders for panels via UPS Ground or other similar method for $10.00 per panel within the continental United States with a maximum
cost of $80.00 per order. This covers packaging and freight from a Comfortex fabrication facility. See Freight Policy on www.comfortexdealers.com for more details.
Customer Signature ___________________________________________ Date ____/____/____ Measured By______________________________________ Date ___/____/____
513100OF 6/08
(1) Quantity Quantity refers to the number of Woodwinds Specialties to be ordered with the same measurements and specifications. Indicate the number you wish to order.
(2) Slat Design Slat Design refers to the arrangement of the slats within the Woodwinds Specialty. See the Woodwinds Specialty Price List for information on which designs are compatible with each style.
Select one of the following: STAR Starburst SUN Sunset
(3) Style Style refers to shape of the Woodwinds Specialty. The following shapes are available. Please use the listed notations when filling in the (2) column on this.
Bullet Shaped Elongated Eyebrow Half Circle Hexagon Inserted Oval (also Full Quarter Circle Raked Top (Asym- Raked Top (Sym-
(also Octagon) Circle) metrical) metrical)
(4) Color Woodwinds Specialties may be ordered to match either Woodwinds Blinds or Woodwinds Plantation Shutters in the following colors. Please indicate the color number.
Blinds 7050 Flute, 7000 Oboe, 7005 Cornetta, 7010 Bassoon, 7020 Ocarina and 7030 Pan Pipe
Plantation Shutters 7004 Piccolo, 7008 Bolero and 7028 Clarinet
(5) Width Width is the horizontal measurement at the widest point of the Woodwinds Specialty. Indicate the width in inches.
(6) Length Length is the vertical measurement at the tallest point of the Woodwinds Specialty. Indicate the length in inches.
(7) Mount Mount refers to how the Woodwinds Specialty is installed in the window opening. Select one of the following:
I Inside mount with rabbet (This mount is for a drywall window opening without molding or for a specialty opening that does not abut a shutter or blind. The rabbet creates a
frame within the opening on all but the bottom edge.)
O Outside mount (This mount is for an application where the edges of the Woodwinds Specialty extend past the window opening to avoid molding or other obstructions.)
N Inside mount, no rabbet (This mount is for a window with molding around the perimeter of the opening. The Specialty is not framed.)
(8) Shutter Frame Mount This column only applies to Woodwinds Specialties that are paired with Woodwinds Plantation Shutters. By knowing the type of shutter framing used, Comfortex can make additions or
deductions to the original specialty measurements so the two treatments blend together seamlessly for a completely unified appearance.
Select one of the following:
N No shutter framing Z On top of Standard Z-Frame
X On top of Deluxe Z-Frame L On top of L-Frame
(9) Eyebrow Right Side Length Only used in Eyebrow Specialty measurement, the Eyebrow Right Side Length is the vertical measurement of the right side, which is perpendicular to the bottom horizontal window
edge. Indicate the length in inches.
(10) Eyebrow Left Side Length Only used in Eyebrow Specialty Measurement, the Eyebrow Left Side Length is the vertical measurement of the left side, which is perpendicular to the bottom horizontal window edge.
Indicate the length in inches.
(11) Bottom Rabbet Only used in when the mount type is “inside mount with rabbet” (I), the bottom rabbet completes the framed look when the Specialty does not abut a shutter or a blind.
Circle one: Y Yes N No
(12) Template Indicate whether your Woodwinds Specialty requires a template. See the Woodwinds Specialty Price List for complete template information. Templates are not required on perfect half
Circle Arches.
Select one: Y Yes N No
(13) Special Instructions “Special Instructions” allows you to outline any pertinent information that will help the assemble a Woodwinds Specialty. Space is provided for you to add written details, as well as
illustrations, to explain the measurements of the Specialty as clearly as possible. Comfortex encourages you to include an illustration of every Woodwinds Specialty ordered.
Comfortex Window Fashions
21 Elm Street • Maplewood, New York 12189
(800) 843-4151 (phone) • (800) 336-4580 (fax)
www.comfortex.com • www.comfortexdealers.com
511601PL
NEW FOR 2009
NEWPORT WOODS
BASSWOOD BLINDS
Woodwinds Wood Alloy Blinds
• Innovative Wood Alloy material resists warping, fading,
chipping and cracking for a lifetime of resilient beauty. Moisture and
high temperatures are no match for Woodwinds durability!
• Over 30 decorative tape colors and exclusive patterns personalize each blind.
• Woodwinds are offered with four distinct slat styles including the 2½" Beveled
profile.
• Woodwinds feature two standard upgrades which add functional elegance to each and every
blind: the elegant Crown Valance and the light-tight Trapezoidal Bottom Rail.
Newport Woods Basswood Blinds
• Blinds are expertly crafted from premium basswood in top selling painted and stained colors in
three slat sizes.
• Over 30 decorative tape colors and exclusive patterns personalize each blind.
• Cordless and Motorized hardware upgrades for a streamlined look and operation.
Woodwinds Specialty Shapes
• Specialty Shapes accent architectural windows of all different sizes.
• Ten geometric shapes feature movable or stationary louvers.
• Woodwinds Specialty Shapes coordinate with Woodwinds Wood Alloy Blinds or Plantation Shutters in
the white color palette.
