Published and distributed

Document Sample
Published and distributed Powered By Docstoc
					Catalogue      Catalogue Section                              ISBN             ISBN-13


Engineering    Mechanical engineering and general materials    0 85709 017 8   978 0 85709 017 1
Engineering    Mechanical engineering and general materials    0 85709 162 X   978 0 85709 162 8
Engineering    Mechanical engineering and general materials    0 85709 154 9   978 0 85709 154 3
Materials      High temperature materials and power generation 0 85709 415 7   978 0 85709 415 5
Materials      High temperature materials and power generation 0 85709 116 6   978 0 85709 116 1
Engineering    Fatigue, fracture and failure                   0 85709 531 5   978 0 85709 531 2
Materials      Transport materials and technologies            0 85709 522 6   978 0 85709 522 0
Environment    Renewable power generation                      0 85709 521 8   978 0 85709 521 3
Materials      High temperature materials and power generation 0 85709 498 X   978 0 85709 498 8
Materials      High temperature materials and power generation 0 85709 435 1   978 0 85709 435 3
Materials      High temperature materials and power generation 0 85709 431 9   978 0 85709 431 5
Materials      High temperature materials and power generation 0 85709 427 0   978 0 85709 427 8
Materials      High temperature materials and power generation 0 85709 426 2   978 0 85709 426 1
Food Science   Quality                                         0 85709 106 9   978 0 85709 106 2
Materials      High temperature materials and power generation 0 85709 422 X   978 0 85709 422 3
Textile        Clothing                                        0 85709 105 0   978 0 85709 105 5
Materials      High temperature materials and power generation 0 85709 414 9   978 0 85709 414 8
Materials      High temperature materials and power generation 0 85709 411 4   978 0 85709 411 7
Materials      High temperature materials and power generation 0 85709 398 3   978 0 85709 398 1

Food Science   Ingredients                                     0 85709 343 6   978 0 85709 343 1
Food Science   Quality                                         0 85709 274 X   978 0 85709 274 8
Materials      High temperature materials and power generation 0 85709 238 3   978 0 85709 238 0
Materials      High temperature materials and power generation 0 85709 239 1   978 0 85709 239 7
Food Science   Fruit and vegetables                            0 85709 266 9   978 0 85709 266 3
Materials      High temperature materials and power generation 0 85709 243 X   978 0 85709 243 4
Materials      High temperature materials and power generation 0 85709 131 X   978 0 85709 131 4
Materials      High temperature materials and power generation 1 84569 783 9   978 1 84569 783 9
Food Science   Ingredients                                     0 85709 008 9   978 0 85709 008 9
Materials      High temperature materials and power generation 1 84569 784 7   978 1 84569 784 6
Engineering    Mechanical engineering and general materials    0 85709 211 1   978 0 85709 211 3
Textile        Fibre/fabric properties and testing             1 84569 791 X   978 1 84569 791 4
Textile        High performance/technical textiles             1 84569 790 1   978 1 84569 790 7
Materials      High temperature materials and power generation 1 84569 639 5   978 1 84569 639 9
Materials      Electronic and optical materials                1 84569 635 2   978 1 84569 635 1
Materials      Electronic and optical materials                0 85709 235 9   978 0 85709 235 9
Food Science   Technology                                      1 84569 665 4   978 1 84569 665 8
Textile        Colouration and finishing                       1 84569 627 1   978 1 84569 627 6
Materials      Biomaterials                                    1 84569 577 1   978 1 84569 577 4
Materials      Biomaterials                                    1 84569 799 5   978 1 84569 799 0
Materials      Biomaterials                                    1 84569 935 1   978 1 84569 935 2
Textile        Design and product development                  1 84569 939 4   978 1 84569 939 0
Materials      Biomaterials                                    0 85709 070 4   978 0 85709 070 6
Materials      High temperature materials and power generation 1 84569 967 X   978 1 84569 967 3
Materials      Biomaterials                                    0 85709 130 1   978 0 85709 130 7
Environment    Urban development                               0 85709 046 1   978 0 85709 046 1
Materials      Biomaterials                                    0 85709 233 2   978 0 85709 233 5
Materials      Biomaterials                                    0 85709 244 8   978 0 85709 244 1
Materials      Electronic and optical materials                0 85709 057 7   978 0 85709 057 7
Textile        Fabric technologies                            0 85709 027 5    978 0 85709 027 0
Textile        Fibre/fabric properties and testing            0 85709 029 1    978 0 85709 029 4
Materials      Electronic and optical materials               0 85709 118 2    978 0 85709 118 5
Materials      Electronic and optical materials               0 85709 065 8    978 0 85709 065 2
Materials      Biomaterials                                   0 85709 127 1    978 0 85709 127 7
Materials      Metals mining and processing                   0 85709 088 7    978 0 85709 088 1
Food Science   Functional foods and nutrition                 0 85709 124 7    978 0 85709 124 6

Materials      High temperature materials and power generation 0 85709 059 3   978 0 85709 059 1
Food Science   Safety                                          0 85709 058 5   978 0 85709 058 4
Materials      High temperature materials and power generation 0 85709 073 9   978 0 85709 073 7
Materials      Metals mining and processing                    0 85709 074 7   978 0 85709 074 4
Food Science   Ingredients                                     0 85709 038 0   978 0 85709 038 6
Food Science   Quality                                         0 85709 036 4   978 0 85709 036 2
Materials      High temperature materials and power generation 0 85709 011 9   978 0 85709 011 9
Materials      Electronic and optical materials                0 85709 121 2   978 0 85709 121 5
Materials      Electronic and optical materials                1 84569 989 0   978 1 84569 989 5
Materials      Biomaterials                                    1 84569 932 7   978 1 84569 932 1
Food Science   Quality                                         1 84569 801 0   978 1 84569 801 0
Textile        Fabric technologies                             1 84569 931 9   978 1 84569 931 4
Materials      Electronic and optical materials                0 85709 089 5   978 0 85709 089 8
Engineering    Mechanical engineering and general materials    1 84569 570 4   978 1 84569 570 5
Textile        Colouration and finishing                       0 85709 133 6   978 0 85709 133 8
Materials      High temperature materials and power generation 0 85709 263 4   978 0 85709 263 2
Textile        Intelligent and medical textiles                1 84569 439 2   978 1 84569 439 5
Materials      Electronic and optical materials                0 85709 232 4   978 0 85709 232 8
Materials      Biomaterials                                    0 85709 129 8   978 0 85709 129 1
Materials      Polymer composites                              1 84569 940 8   978 1 84569 940 6
Materials      Biomaterials                                    1 84569 987 4   978 1 84569 987 1
Materials      High temperature materials and power generation 0 85709 132 8   978 0 85709 132 1
Materials      Biomaterials                                    1 84569 929 7   978 1 84569 929 1
Materials      Composites                                      0 85709 067 4   978 0 85709 067 6
Textile        High performance/technical textiles             0 85709 069 0   978 0 85709 069 0
Engineering    Welding technologies                            0 85709 423 8   978 0 85709 423 0
Materials      Electronic and optical materials                1 84569 936 X   978 1 84569 936 9
Materials      Biomaterials                                    1 84569 948 3   978 1 84569 948 2
Materials      High temperature materials and power generation 1 84569 769 3   978 1 84569 769 3
Textile        Fabric technologies                             1 84569 930 0   978 1 84569 930 7
Textile        High performance/technical textiles             1 84569 699 9   978 1 84569 699 3
Food Science   Technology                                      0 85709 085 2   978 0 85709 085 0
Materials      Metals mining and processing                    0 85709 066 6   978 0 85709 066 9
Materials      Adhesives                                       1 84569 452 X   978 1 84569 452 4
Materials      Transport materials and technologies            1 84569 550 X   978 1 84569 550 7
Food Science   Meat, fish and eggs                             0 85709 016 X   978 0 85709 016 4
Engineering    Mechanical engineering and general materials    0 85709 078 X   978 0 85709 078 2
Engineering    Mechanical engineering and general materials    1 84569 996 3   978 1 84569 996 3
Textile        Natural textile fibres                          1 84569 698 0   978 1 84569 698 6
Materials      Electronic and optical materials                1 84569 988 2   978 1 84569 988 8
Materials      High temperature materials and power generation 1 84569 728 6   978 1 84569 728 0
Textile        Natural textile fibres                          1 84569 697 2   978 1 84569 697 9
Food Science   Technology                                      1 84569 809 6   978 1 84569 809 6
Engineering    Mechanical engineering and general materials    0 85709 206 5   978 0 85709 206 9
Engineering    Mechanical engineering and general materials   0 85709 209 X    978 0 85709 209 0
Materials      Biomaterials                                   0 85709 128 X    978 0 85709 128 4
Food Science   Ingredients                                    0 85709 039 9    978 0 85709 039 3
Engineering    Mechanical engineering and general materials   1 84569 982 3    978 1 84569 982 6

Engineering Civil engineering                                 0 85709 026 7 978 0 85709 026 3
Materials   Steel                                             1 84569 970 X 978 1 84569 970 3
Materials   Steel                                             1 84569 971 8 978 1 84569 971 0

Food Science   Ingredients                                     0 85709 040 2   978 0 85709 040 9
Food Science   Safety                                          1 84569 725 1   978 1 84569 725 9
Engineering    Mechanical engineering and general materials    1 84569 991 2   978 1 84569 991 8
Food Science   Meat, fish and eggs                             1 84569 751 0   978 1 84569 751 8
Food Science   Functional foods and nutrition                  0 85709 037 2   978 0 85709 037 9
Materials      Biomaterials                                    1 84569 800 2   978 1 84569 800 3
Food Science   Ingredients                                     1 84569 811 8   978 1 84569 811 9
Textile        Colouration and finishing                       0 85709 134 4   978 0 85709 134 5
Materials      Metals mining and processing                    1 84569 968 8   978 1 84569 968 0
Food Science   Cereal products and snack foods                 0 85709 060 7   978 0 85709 060 7
Materials      High temperature materials and power generation 0 85709 013 5   978 0 85709 013 3
Food Science   Technology                                      1 84569 739 1   978 1 84569 739 6
Textile        Yarn technologies                               1 84569 933 5   978 1 84569 933 8
Materials      Biomaterials                                    1 84569 984 X   978 1 84569 984 0
Textile        Colouration and finishing                       1 84569 972 6   978 1 84569 972 7
Materials      Biomaterials                                    1 84569 986 6   978 1 84569 986 4
Materials      Corrosion and surface engineering               0 85709 015 1   978 0 85709 015 7
Textile        Yarn technologies                               0 85709 104 2   978 0 85709 104 8
Engineering    Mechanical engineering and general materials    0 85709 156 5   978 0 85709 156 7
Materials      Transport materials and technologies            1 84569 561 5   978 1 84569 561 3
Engineering    Mechanical engineering and general materials    0 85709 094 1   978 0 85709 094 2
Materials      High temperature materials and power generation 1 84569 773 1   978 1 84569 773 0
Materials      Electronic and optical materials                0 85709 511 0   978 0 85709 511 4
Materials      High temperature materials and power generation 0 85709 117 4   978 0 85709 117 8
Materials      Corrosion and surface engineering               0 85709 151 4   978 0 85709 151 2
Materials      Biomaterials                                    1 84569 568 2   978 1 84569 568 2
Materials      High temperature materials and power generation 1 84569 774 X   978 1 84569 774 7
Materials      Composites                                      1 84569 750 2   978 1 84569 750 1
Materials      High temperature materials and power generation 1 84569 765 0   978 1 84569 765 5
Materials      High temperature materials and power generation 0 85709 115 8   978 0 85709 115 4
Materials      Corrosion and surface engineering               1 84569 949 1   978 1 84569 949 9
Materials      High temperature materials and power generation 0 85709 012 7   978 0 85709 012 6
Textile        Clothing                                        0 85709 002 X   978 0 85709 002 7
Materials      High temperature materials and power generation 1 84569 973 4   978 1 84569 973 4
Textile        Clothing                                        0 85709 582 X   978 0 85709 582 4
Materials      Metals mining and processing                    0 85709 061 5   978 0 85709 061 4
Engineering    Civil engineering                               0 85709 028 3   978 0 85709 028 7
Engineering    Mechanical engineering and general materials    0 85709 150 6   978 0 85709 150 5
Food Science   Beverages                                       0 85709 051 8   978 0 85709 051 5
Materials      High temperature materials and power generation 0 85709 536 6   978 0 85709 536 7
Materials      Transport materials and technologies            1 85573 946 1   978 1 85573 946 8
Engineering    Welding technologies                            1 84569 532 1   978 1 84569 532 3
Textile        Design and product development                  1 84569 538 0   978 1 84569 538 5
Materials      High temperature materials and power generation 1 84569 677 8   978 1 84569 677 1
Engineering    Mechanical engineering and general materials    0 85709 205 7   978 0 85709 205 2
Food Science   Technology                                      1 84569 664 6   978 1 84569 664 1
Engineering    Mechanical engineering and general materials    0 85709 093 3   978 0 85709 093 5
Engineering    Welding technologies                            0 85709 510 2   978 0 85709 510 7
Materials      Composites                                      0 85709 030 5   978 0 85709 030 0
Textile        Fabric technologies                             0 85709 108 5   978 0 85709 108 6
Textile        Fabric technologies                             0 85709 581 1   978 0 85709 581 7
Textile        Clothing                                        0 85709 107 7   978 0 85709 107 9
Food Science   Safety                                          1 84569 564 X   978 1 84569 564 4
Textile        Colouration and finishing                       1 84569 695 6   978 1 84569 695 5
Textile        Colouration and finishing                       1 84569 696 4   978 1 84569 696 2
Engineering    Mechanical engineering and general materials    1 84569 756 1   978 1 84569 756 3
Engineering    Mechanical engineering and general materials    0 85709 213 8   978 0 85709 213 7
Engineering    Mechanical engineering and general materials    0 85709 099 2   978 0 85709 099 7
Materials      Composites                                      1 84569 990 4   978 1 84569 990 1
Materials      Corrosion and surface engineering               1 84569 966 1   978 1 84569 966 6
Materials      Electronic and optical materials                1 84569 934 3   978 1 84569 934 5
Engineering    Mechanical engineering and general materials    0 85709 054 2   978 0 85709 054 6
Engineering    Mechanical engineering and general materials    1 84569 992 0   978 1 84569 992 5
Food Science   Cereal products and snack foods                 1 84569 770 7   978 1 84569 770 9
Materials      High temperature materials and power generation 1 84569 726 X   978 1 84569 726 6
Materials      Composites                                      1 84569 965 3   978 1 84569 965 9
Materials      High temperature materials and power generation 1 84569 727 8   978 1 84569 727 3
Engineering    Fatigue, fracture and failure                   1 84569 673 5   978 1 84569 673 3
Food Science   Fruit and vegetables                            1 84569 733 2   978 1 84569 733 4
Engineering    Mechanical engineering and general materials    0 85709 077 1   978 0 85709 077 5
Engineering    Civil engineering                               0 85709 048 8   978 0 85709 048 5
Materials      Corrosion and surface engineering               1 84569 812 6   978 1 84569 812 6
Textile        Yarn technologies                               1 84569 757 X   978 1 84569 757 0
Food Science   Ingredients                                     1 84569 758 8   978 1 84569 758 7
Engineering    Mechanical engineering and general materials    0 85709 208 1   978 0 85709 208 3
Materials      Electronic and optical materials                1 84569 937 8   978 1 84569 937 6
Materials      High temperature materials and power generation 1 84569 969 6   978 1 84569 969 7

Food Science   Meat, fish and eggs                            1 84569 754 5    978 1 84569 754 9
Food Science   Meat, fish and eggs                            0 85709 072 0    978 0 85709 072 0
Textile        Intelligent and medical textiles               1 84569 691 3    978 1 84569 691 7
Food Science   Nestlé functional foods and nutrition series   3 8055 9779 7    978 3 8055 9779 1
Food Science   Functional foods and nutrition                 0 85709 004 6    978 0 85709 004 1
Materials      Biomaterials                                   1 84569 768 5    978 1 84569 768 6
Materials      Metals mining and processing                   1 84569 704 9    978 1 84569 704 4
Textile        Intelligent and medical textiles               1 84569 636 0    978 1 84569 636 8
Materials      Polymers and biopolymers                       1 84569 675 1    978 1 84569 675 7
Materials      Electronic and optical materials               1 84569 736 7    978 1 84569 736 5
Textile        Fabric technologies                            1 84569 729 4    978 1 84569 729 7
Food Science   Functional foods and nutrition                 1 84569 752 9    978 1 84569 752 5
Materials      Polymer composites                             0 85709 221 9    978 0 85709 221 2
Food Science   Meat, fish and eggs                            1 84569 466 X    978 1 84569 466 1
Engineering    Mechanical engineering and general materials   0 85709 053 4    978 0 85709 053 9
Food Science   Fruit and vegetables                           0 85709 090 9    978 0 85709 090 4
Food Science   Fruit and vegetables                           1 84569 735 9    978 1 84569 735 8
Materials      Metals mining and processing                    1 84569 753 7   978 1 84569 753 2
Textile        Environmental technology and management         0 85709 136 0   978 0 85709 136 9
Food Science   Fruit and vegetables                            1 84569 734 0   978 1 84569 734 1
Food Science   Cereal products and snack foods                 1 84569 485 6   978 1 84569 485 2
Materials      Biomaterials                                    1 84569 700 6   978 1 84569 700 6
Materials      Biomaterials                                    1 84569 741 3   978 1 84569 741 9
Textile        Intelligent and medical textiles                1 84569 723 5   978 1 84569 723 5
Materials      Metals mining and processing                    0 85709 100 X   978 0 85709 100 0
Mathematics    Statistics                                      0 85709 109 3   978 0 85709 109 3
Materials      Transport materials and technologies            1 84569 715 4   978 1 84569 715 0
Engineering    Fatigue, fracture and failure                   1 84569 662 X   978 1 84569 662 7
Materials      Electronic and optical materials                1 84569 576 3   978 1 84569 576 7
Materials      Biomaterials                                    1 84569 624 7   978 1 84569 624 5
Engineering    Civil engineering                               0 85709 257 X   978 0 85709 257 1
Engineering    Civil engineering                               1 84569 955 6   978 1 84569 955 0
Materials      Polymers and biopolymers                        1 84569 738 3   978 1 84569 738 9
Engineering    Mechanical engineering and general materials    0 85709 172 7   978 0 85709 172 7
Materials      Metals mining and processing                    1 84569 707 3   978 1 84569 707 5
Food Science   Functional foods and nutrition                  1 84569 690 5   978 1 84569 690 0
Materials      High temperature materials and power generation 1 84569 795 2   978 1 84569 795 2
Engineering    Marine engineering and underwater welding       0 85709 248 0   978 0 85709 248 9
Materials      Composites                                      1 84569 762 6   978 1 84569 762 4
Food Science   Functional foods and nutrition                  1 84569 740 5   978 1 84569 740 2
Engineering    Fatigue, fracture and failure                   1 84569 513 5   978 1 84569 513 2
Textile        High performance/technical textiles             1 84569 558 5   978 1 84569 558 3
Textile        Design and product development                  1 84569 646 8   978 1 84569 646 7
Food Science   Beverages                                       0 85709 009 7   978 0 85709 009 6
Textile        Yarn technologies                               0 85709 006 2   978 0 85709 006 5
Food Science   Quality                                         1 84569 701 4   978 1 84569 701 3
Materials      Electronic and optical materials                1 84569 578 X   978 1 84569 578 1
Materials      Biomaterials                                    1 84569 589 5   978 1 84569 589 7
Materials      Composites                                      1 84569 761 8   978 1 84569 761 7
Materials      Corrosion and surface engineering               1 84569 708 1   978 1 84569 708 2
Materials      Metals mining and processing                    1 84569 670 0   978 1 84569 670 2
Food Science   Safety                                          0 85709 068 2   978 0 85709 068 3
Materials      High temperature materials and power generation 1 84569 501 1   978 1 84569 501 9

Materials      Composites                                      1 84569 742 1   978 1 84569 742 6
Materials      Electronic and optical materials                1 84569 689 1   978 1 84569 689 4
Materials      Biomaterials                                    1 84569 590 9   978 1 84569 590 3
Engineering    Computing and electrical engineering            0 85709 225 1   978 0 85709 225 0
Materials      High temperature materials and power generation 1 84569 671 9   978 1 84569 671 9
Textile        Fabric technologies                             1 84569 372 8   978 1 84569 372 5
Food Science   Food consumers and product development          1 84569 431 7   978 1 84569 431 9
Food Science   Nestlé functional foods and nutrition series    3 8055 9586 7   978 3 8055 9586 5
Food Science   Safety                                          1 84569 674 3   978 1 84569 674 0
Engineering    Mechanical engineering and general materials    0 85709 114 X   978 0 85709 114 7
Materials      High temperature materials and power generation 1 84569 626 3   978 1 84569 626 9
Materials      Biomaterials                                    1 84569 588 7   978 1 84569 588 0
Textile        Clothing                                        1 84569 539 9   978 1 84569 539 2
Materials      Corrosion and surface engineering               1 84569 658 1   978 1 84569 658 0
Materials      Corrosion and surface engineering               1 84569 808 8   978 1 84569 808 9
Materials      Chemistry and general science                   0 85709 240 5   978 0 85709 240 3
Engineering    Civil engineering                               1 84569 398 1   978 1 84569 398 5
Materials      High temperature materials and power generation 1 84569 580 1   978 1 84569 580 4
Materials      Biomaterials                                    1 84569 653 0   978 1 84569 653 5
Engineering    Mechanical engineering and general materials    1 84569 786 3   978 1 84569 786 0
Finance        Commodities                                     0 85709 125 5   978 0 85709 125 3
Food Science   Safety                                          1 84569 669 7   978 1 84569 669 6

Textile        Fabric technologies                             1 84569 663 8   978 1 84569 663 4
Materials      Composites                                      1 84569 656 5   978 1 84569 656 6
Materials      Biomaterials                                    1 84569 640 9   978 1 84569 640 5
Materials      High temperature materials and power generation 1 84569 679 4   978 1 84569 679 5
Materials      Metals mining and processing                    1 84569 654 9   978 1 84569 654 2
Food Science   Safety                                          1 84569 496 1   978 1 84569 496 8
Materials      Metals mining and processing                    0 85709 010 0   978 0 85709 010 2
Materials      Composites                                      1 84569 672 7   978 1 84569 672 6
Materials      Biomaterials                                    1 84569 464 3   978 1 84569 464 7
Materials      Electronic and optical materials                1 84569 579 8   978 1 84569 579 8
Materials      Metals mining and processing                    1 84569 692 1   978 1 84569 692 4
Food Science   Technology                                      1 84569 551 8   978 1 84569 551 4
Food Science   Technology                                      1 84569 645 X   978 1 84569 645 0

Materials      High temperature materials and power generation 1 84569 511 9   978 1 84569 511 8
Engineering    Mechanical engineering and general materials    1 84569 755 3   978 1 84569 755 6
Mathematics    General mathematics                             0 85709 223 5   978 0 85709 223 6
Food Science   Environmental technology and management         1 84569 552 6   978 1 84569 552 1
Food Science   Beverages                                       1 84569 798 7   978 1 84569 798 3
Materials      Transport materials and technologies            1 84569 361 2   978 1 84569 361 9
Textile        Yarn technologies                               1 84569 444 9   978 1 84569 444 9
Materials      Electronic and optical materials                1 84569 534 8   978 1 84569 534 7
Textile        High performance/technical textiles             1 84569 397 3   978 1 84569 397 8
Food Science   Quality                                         1 84569 648 4   978 1 84569 648 1
Materials      Ceramics                                        1 84569 562 3   978 1 84569 562 0
Textile        Clothing                                        0 85709 005 4   978 0 85709 005 8
Food Science   Quality                                         1 84569 983 1   978 1 84569 983 3
Materials      Transport materials and technologies            1 84569 713 8   978 1 84569 713 6
Textile        Colouration and finishing                       1 84569 625 5   978 1 84569 625 2
Materials      High temperature materials and power generation 0 85709 079 8   978 0 85709 079 9
Textile        Colouration and finishing                       1 84569 559 3   978 1 84569 559 0
Materials      Electronic and optical materials                1 84569 772 3   978 1 84569 772 3
Food Science   Food consumers and product development          1 84569 567 4   978 1 84569 567 5
Food Science   Technology                                      1 84569 746 4   978 1 84569 746 4
Materials      High temperature materials and power generation 1 84569 542 9   978 1 84569 542 2

Materials      High temperature materials and power generation 1 84569 527 5   978 1 84569 527 9
Materials      Composites                                      1 84569 525 9   978 1 84569 525 5
Materials      Corrosion and surface engineering               1 84569 474 0   978 1 84569 474 6
Engineering    Civil engineering                               1 84569 950 5   978 1 84569 950 5
Food Science   Beverages                                       1 84569 475 9   978 1 84569 475 3
Engineering    Fatigue, fracture and failure                   1 84569 536 4   978 1 84569 536 1
Textile        Intelligent and medical textiles                1 84569 224 1   978 1 84569 224 7
Materials      High temperature materials and power generation 1 84569 797 9   978 1 84569 797 6
Materials      Biomaterials                                    1 84569 509 7   978 1 84569 509 5
Textile        Yarn technologies                               1 84569 549 6   978 1 84569 549 1
Materials      High temperature materials and power generation 1 84569 533 X   978 1 84569 533 0
Textile        Fabric technologies                             1 84569 437 6   978 1 84569 437 1
Engineering    Civil engineering                               1 84569 560 7   978 1 84569 560 6
Food Science   Lipids (Including the Oily Press Series)        0 9552512 4 9   978 0 9552512 4 5
Materials      High temperature materials and power generation 1 84569 510 0   978 1 84569 510 1
Materials      High temperature materials and power generation 1 84569 515 1   978 1 84569 515 6
Materials      Ceramics                                        1 84569 531 3   978 1 84569 531 6
Food Science   Quality                                         1 84569 476 7   978 1 84569 476 0
Materials      Corrosion and surface engineering               1 84569 537 2   978 1 84569 537 8
Food Science   Cereal products and snack foods                 1 84569 563 1   978 1 84569 563 7
Textile        Yarn technologies                               0 85709 000 3   978 0 85709 000 3
Textile        High performance/technical textiles             0 85709 007 0   978 0 85709 007 2
Textile        Design and product development                  0 85709 001 1   978 0 85709 001 0
Food Science   Nestlé functional foods and nutrition series    3 8055 9427 5   978 3 8055 9427 1
Food Science   Beverages                                       1 84569 484 8   978 1 84569 484 5
Food Science   Quality                                         1 84569 495 3   978 1 84569 495 1
Engineering    Civil engineering                               1 84569 526 7   978 1 84569 526 2
Food Science   Chilled/frozen and dairy products               1 84569 806 1   978 1 84569 806 5
Engineering    Mechanical engineering and general materials    1 84569 712 X   978 1 84569 712 9
Food Science   Chilled/frozen and dairy products               1 84569 438 4   978 1 84569 438 8
Materials      Biomaterials                                    1 84569 434 1   978 1 84569 434 0
Engineering    Adhesives                                       1 84569 435 X   978 1 84569 435 7
Materials      Composites                                      1 84569 399 X   978 1 84569 399 2
Materials      Transport materials and technologies            1 84569 497 X   978 1 84569 497 5
Materials      Fire retardant materials                        1 84569 502 X   978 1 84569 502 6
Textile        Fabric technologies                             1 84569 514 3   978 1 84569 514 9
Materials      Transport materials and technologies            1 84569 463 5   978 1 84569 463 0
Textile        Natural textile fibres                          1 84569 954 8   978 1 84569 954 3
Materials      High temperature materials and power generation 1 84569 591 7   978 1 84569 591 0
Materials      Polymers and biopolymers                        1 84569 185 7   978 1 84569 185 1
Food Science   Nestlé functional foods and nutrition series    3 8055 9304 X   978 3 8055 9304 5
Food Science   Nestlé functional foods and nutrition series    3 8055 9454 2   978 3 8055 9454 7
Textile        Clothing                                        1 84569 789 8   978 1 84569 789 1
Textile        Colouration and finishing                       1 84569 379 5   978 1 84569 379 4
Food Science   Quality                                         1 84569 471 6   978 1 84569 471 5
Materials      Biomaterials                                    1 84569 417 1   978 1 84569 417 3
Food Science   Nestlé functional foods and nutrition series    3 8055 9300 7   978 3 8055 9300 7
Engineering    Welding technologies                            1 84569 450 3   978 1 84569 450 0
Materials      Biomaterials                                    1 84569 443 0   978 1 84569 443 2
Materials      Composites                                      1 84569 462 7   978 1 84569 462 3
Materials      Transport materials and technologies            1 84569 744 8   978 1 84569 744 0
Food Science   Quality                                         1 84569 676 X   978 1 84569 676 4
Materials      Biomaterials                                    1 84569 470 8   978 1 84569 470 8
Food Science   Nestlé functional foods and nutrition series    3 8055 9019 9   978 3 8055 9019 8
Textile        Fibre/fabric properties and testing             1 84569 416 3   978 1 84569 416 6
Textile        Colouration and finishing                       1 84569 788 X   978 1 84569 788 4
Materials      Composites                                      1 84569 775 8   978 1 84569 775 4
Materials      Biomaterials                                    1 84569 436 8   978 1 84569 436 4
Food Science   Environmental technology and management         1 84569 391 4   978 1 84569 391 6
Materials      Steel                                           1 84569 686 7   978 1 84569 686 3
Engineering    Civil engineering                              1 84569 408 2    978 1 84569 408 1
Food Science   Chilled/frozen and dairy products              1 84569 465 1    978 1 84569 465 4
Materials      Transport materials and technologies           1 84569 389 2    978 1 84569 389 3
Materials      Electronic and optical materials               1 84569 632 8    978 1 84569 632 0
Textile        Fibre/fabric properties and testing            1 84569 730 8    978 1 84569 730 3
Engineering    Inspection and testing                         1 84569 641 7    978 1 84569 641 2
Textile        Fibre/fabric properties and testing            1 84569 380 9    978 1 84569 380 0
Textile        Environmental technology and management        1 84569 453 8    978 1 84569 453 1
Textile        Fibre/fabric properties and testing            1 84569 387 6    978 1 84569 387 9
Environment    Atmospheric pollution, toxins and wastes       1 904275 42 7    978 1 904275 42 8
Materials      Chemistry and general science                  1 904275 36 2    978 1 904275 36 7
Materials      Chemistry and general science                  1 904275 44 3    978 1 904275 44 2
Textile        Clothing                                       1 84569 411 2    978 1 84569 411 1
Materials      Composites                                     1 84569 217 9    978 1 84569 217 9
Materials      Transport materials and technologies           1 84569 412 0    978 1 84569 412 8
Textile        High performance/technical textiles            1 84569 351 5    978 1 84569 351 0
Food Science   Nestlé functional foods and nutrition series   3 8055 9296 5    978 3 8055 9296 3
Food Science   Safety                                         1 84569 477 5    978 1 84569 477 7
Engineering    Civil engineering                              1 84569 369 8    978 1 84569 369 5
Textile        Clothing                                       81 908001 3 2    978 81 908001 3 6
Textile        Design and product development                 81 908001 2 4    978 81 908001 2 9
Food Science   Beverages                                      1 84569 326 4    978 1 84569 326 8
Textile        Colouration and finishing                      1 84569 419 8    978 1 84569 419 7
Materials      Biomaterials                                   1 84569 385 X    978 1 84569 385 5
Food Science   Cereal products and snack foods                1 84569 382 5    978 1 84569 382 4
Food Science   Nestlé functional foods and nutrition series   3 8055 9167 5    978 3 8055 9167 6
Engineering    Civil engineering                              1 84569 392 2    978 1 84569 392 3
Engineering    Fatigue, fracture and failure                  1 85573 740 X    978 1 85573 740 2
Food Science   Nestlé functional foods and nutrition series   3 8055 9224 8    978 3 8055 9224 6
Food Science   Functional foods and nutrition                 1 84569 432 5    978 1 84569 432 6

Materials      High temperature materials and power generation 1 84569 628 X   978 1 84569 628 3
Food Science   Meat, fish and eggs                             1 84569 384 1   978 1 84569 384 8
Materials      Polymers and biopolymers                        1 84569 420 1   978 1 84569 420 3
Materials      Composites                                      1 84569 269 1   978 1 84569 269 8
Food Science   Safety                                          1 84569 362 0   978 1 84569 362 6
Food Science   Food consumers and product development          1 84569 718 9   978 1 84569 718 1
Engineering    Welding technologies                            1 84569 370 1   978 1 84569 370 1
Food Science   Chocolate and confectionery                     1 84569 390 6   978 1 84569 390 9

Food Science   Technology                                     1 84569 216 0    978 1 84569 216 2
Engineering    Civil engineering                              1 84569 449 X    978 1 84569 449 4
Engineering    Fatigue, fracture and failure                  1 84569 530 5    978 1 84569 530 9
Food Science   Lipids (Including the Oily Press Series)       0 9552512 3 0    978 0 9552512 3 8
Textile        Clothing                                       1 84569 134 2    978 1 84569 134 9
Engineering    Civil engineering                              1 84569 518 6    978 1 84569 518 7
Materials      Polymers and biopolymers                       1 84569 396 5    978 1 84569 396 1
Food Science   Ingredients                                    1 84569 414 7    978 1 84569 414 2
Engineering    Marine engineering and underwater welding      1 84569 386 8    978 1 84569 386 2
Engineering    Mechanical engineering and general materials   1 84569 569 0    978 1 84569 569 9
Textile        Intelligent and medical textiles               1 84569 271 3    978 1 84569 271 1
Mathematics    General mathematics                            1 904275 40 0    978 1 904275 40 4
Food Science   Functional foods and nutrition                  1 84569 418 X   978 1 84569 418 0
Engineering    Civil engineering                               1 84569 349 3   978 1 84569 349 7
Materials      Biomaterials                                    1 84569 402 3   978 1 84569 402 9
Materials      Metals mining and processing                    1 84569 375 2   978 1 84569 375 6
Materials      Biomaterials                                    1 84569 529 1   978 1 84569 529 3
Environment    Water management                                1 85573 834 1   978 1 85573 834 8
Food Science   Nestlé functional foods and nutrition series    3 8055 9097 0   978 3 8055 9097 6
Textile        Fibre/fabric properties and testing             1 84569 327 2   978 1 84569 327 5
Mathematics    Applied mathematics                             1 904275 39 7   978 1 904275 39 8
Food Science   Safety                                          1 84569 218 7   978 1 84569 218 6
Food Science   Functional foods and nutrition                  1 84569 592 5   978 1 84569 592 7
Food Science   Food consumers and product development          1 84569 403 1   978 1 84569 403 6
Textile        High performance/technical textiles             1 84569 333 7   978 1 84569 333 6
Engineering    Fatigue, fracture and failure                   1 84569 582 8   978 1 84569 582 8
Food Science   Nestlé functional foods and nutrition series    3 8055 9009 1   978 3 8055 9009 9
Textile        Yarn technologies                               81 908001 1 6   978 81 908001 1 2
Textile        Design and product development                  81 908001 0 8   978 81 908001 0 5
Textile        Clothing                                        1 84569 357 4   978 1 84569 357 2
Textile        Fibre/fabric properties and testing             1 84569 266 7   978 1 84569 266 7
Food Science   Beverages                                       1 84569 342 6   978 1 84569 342 8
Food Science   Meat, fish and eggs                             1 84569 152 0   978 1 84569 152 3
Textile        Synthetic fibres                                1 84569 207 1   978 1 84569 207 0
Materials      Biomaterials                                    1 84569 363 9   978 1 84569 363 3
Food Science   Meat, fish and eggs                             1 84569 343 4   978 1 84569 343 5
Materials      Corrosion and surface engineering               1 84569 345 0   978 1 84569 345 9
Materials      Biomaterials                                    1 84569 358 2   978 1 84569 358 9
Textile        Natural textile fibres                          1 84569 332 9   978 1 84569 332 9
Food Science   Functional foods and nutrition                  1 84569 193 8   978 1 84569 193 6
Engineering    Fatigue, fracture and failure                   1 84569 300 0   978 1 84569 300 8
Textile        Design and product development                  1 84569 048 6   978 1 84569 048 9
Materials      Biomaterials                                    1 84569 344 2   978 1 84569 344 2
Materials      High temperature materials and power generation 1 84569 330 2   978 1 84569 330 5
Materials      Composites                                      1 84569 244 6   978 1 84569 244 5
Engineering    Civil engineering                               1 84569 334 5   978 1 84569 334 3
Textile        High performance/technical textiles             1 84569 331 0   978 1 84569 331 2
Materials      Biomaterials                                    1 84569 376 0   978 1 84569 376 3
Materials      Composites                                      1 84569 393 0   978 1 84569 393 0
Textile        Fibre/fabric properties and testing             1 84569 220 9   978 1 84569 220 9
Textile        Fibre/fabric properties and testing             1 84569 135 0   978 1 84569 135 6
Textile        Intelligent and medical textiles                1 84569 247 0   978 1 84569 247 6
Materials      High temperature materials and power generation 1 84569 270 5   978 1 84569 270 4
Materials      Biomaterials                                    1 84569 329 9   978 1 84569 329 9
Food Science   Chilled/frozen and dairy products               1 84569 243 8   978 1 84569 243 8
Materials      Transport materials and technologies            1 84569 325 6   978 1 84569 325 1
Food Science   Ingredients                                     1 84569 519 4   978 1 84569 519 4
Textile        High performance/technical textiles             1 84569 262 4   978 1 84569 262 9
Textile        Fibre/fabric properties and testing             1 84569 297 7   978 1 84569 297 1
Textile        Fabric technologies                             1 84569 377 9   978 1 84569 377 0

Materials    Composites                                       1 84569 352 3 978 1 84569 352 7
Food Science Meat, fish and eggs                              1 84569 299 3 978 1 84569 299 5
Materials    Biomaterials                                     1 84569 264 0 978 1 84569 264 3
Food Science   Nestlé functional foods and nutrition series   3 8055 8530 6    978 3 8055 8530 9
Food Science   Nestlé functional foods and nutrition series   3 8055 8553 5    978 3 8055 8553 8
Food Science   Chocolate and confectionery                    0 95580 853 7    978 0 95580 853 1
Materials      Metals mining and processing                   1 84569 407 4    978 1 84569 407 4
Food Science   Technology                                     1 84569 194 6    978 1 84569 194 3
Engineering    Civil engineering                              1 84569 448 1    978 1 84569 448 7

Materials      Corrosion and surface engineering               1 84569 265 9   978 1 84569 265 0
Materials      Biomaterials                                    1 84569 245 4   978 1 84569 245 2
Food Science   Environmental technology and management         1 84569 195 4   978 1 84569 195 0
Materials      Composites                                      1 84569 267 5   978 1 84569 267 4
Textile        Synthetic fibres                                1 84569 298 5   978 1 84569 298 8
Food Science   Technology                                      1 84569 246 2   978 1 84569 246 9
Engineering    Civil engineering                               1 84569 263 2   978 1 84569 263 6
Textile        Fibre/fabric properties and testing             1 85573 920 8   978 1 85573 920 8
Food Science   Lipids (Including the Oily Press Series)        0 9552512 2 2   978 0 9552512 2 1
Materials      Metals mining and processing                    1 84569 406 6   978 1 84569 406 7
Materials      Corrosion and surface engineering               1 84569 238 1   978 1 84569 238 4
Materials      Polymer composites                              1 84569 272 1   978 1 84569 272 8
Textile        Clothing                                        1 84569 295 0   978 1 84569 295 7
Textile        High performance/technical textiles             1 84569 206 3   978 1 84569 206 3
Engineering    Mechanical engineering and general materials    1 84569 499 6   978 1 84569 499 9
Food Science   Meat, fish and eggs                             1 84569 019 2   978 1 84569 019 9
Food Science   Cereal products and snack foods                 0 95580 850 2   978 0 95580 850 0
Engineering    Mechanical engineering and general materials    1 84569 328 0   978 1 84569 328 2
Materials      High temperature materials and power generation 1 84569 433 3   978 1 84569 433 3
Food Science   Fruit and vegetables                            1 84569 184 9   978 1 84569 184 4
Engineering    Inspection and testing                          1 84569 268 3   978 1 84569 268 1
Materials      High temperature materials and power generation 1 84569 219 5   978 1 84569 219 3
Engineering    Civil engineering                               1 904275 28 1   978 1 904275 28 2
Engineering    Civil engineering                               1 904275 29 X   978 1 904275 29 9
Materials      Polymers and biopolymers                        1 84735 089 5   978 1 84735 089 3
Food Science   Functional foods and nutrition                  1 84569 144 X   978 1 84569 144 8
Engineering    Welding technologies                            1 84569 179 2   978 1 84569 179 0
Engineering    Mechanical engineering and general materials    1 84569 490 2   978 1 84569 490 6
Materials      Biomaterials                                    1 84569 296 9   978 1 84569 296 4
Materials      Biomaterials                                    1 84569 204 7   978 1 84569 204 9
Materials      Corrosion and surface engineering               1 84569 423 6   978 1 84569 423 4
Materials      Ceramics                                        1 84569 186 5   978 1 84569 186 8
Materials      High temperature materials and power generation 1 84569 178 4   978 1 84569 178 3
Materials      Plastics and rubber                             1 84735 088 7   978 1 84735 088 6
Engineering    Computing and electrical engineering            1 904275 32 X   978 1 904275 32 9
Food Science   Fruit and vegetables                            1 84569 183 0   978 1 84569 183 7
Materials      Chemistry and general science                   1 904275 33 8   978 1 904275 33 6
Food Science   Nestlé functional foods and nutrition series    3 8055 8387 7   978 3 8055 8387 9
Materials      Corrosion and surface engineering               1 84569 187 3   978 1 84569 187 5
Materials      Metals mining and processing                    1 84569 230 6   978 1 84569 230 8
Materials      Metallurgy                                      1 84569 215 2   978 1 84569 215 5
Food Science   Technology                                      1 84569 145 8   978 1 84569 145 5
Mathematics    Mathematics for engineers                       1 898563 65 9   978 1 898563 65 5
Materials      Steel                                           3 514 00745 4   978 3 514 00745 1
Mathematics    Mathematics for engineers                       1 904275 31 1   978 1 904275 31 2
Food Science   Chocolate and confectionery                     0 95580 851 0   978 0 95580 851 7
Mathematics    Applied mathematics                             1 904275 34 6   978 1 904275 34 3
Food Science   Food consumers and product development          1 84569 260 8   978 1 84569 260 5
Materials      Plastics and rubber                             1 84735 081 X   978 1 84735 081 7
Food Science   Cereal products and snack foods                 1 84569 177 6   978 1 84569 177 6
Materials      Polymers and biopolymers                        1 84735 083 6   978 1 84735 083 1
Materials      High temperature materials and power generation 1 84569 205 5   978 1 84569 205 6
Materials      Biomaterials                                    1 84569 176 8   978 1 84569 176 9
Food Science   Technology                                      1 84569 058 3   978 1 84569 058 8
Textile        Fabric technologies                             1 84569 105 9   978 1 84569 105 9
Materials      Composites                                      1 84735 062 3   978 1 84735 062 6
Food Science   Safety                                          1 84735 079 8   978 1 84735 079 4
Food Science   Technology                                      1 84569 132 6   978 1 84569 132 5
Materials      Corrosion and surface engineering               1 84569 181 4   978 1 84569 181 3
Materials      Plastics and rubber                             1 84569 131 8   978 1 84569 131 8
Food Science   Quality                                         1 84569 151 2   978 1 84569 151 6
Materials      High temperature materials and power generation 1 84569 231 4   978 1 84569 231 5
Materials      Corrosion and surface engineering               1 84569 365 5   978 1 84569 365 7
Materials      Biomaterials                                    1 84569 070 2   978 1 84569 070 0
Materials      Transport materials and technologies            1 84569 128 8   978 1 84569 128 8
Materials      Polymer composites                              1 84735 065 8   978 1 84735 065 7
Mathematics    Mathematical modelling and scientific computing 1 904275 20 6   978 1 904275 20 6
Food Science   Safety                                          1 84569 010 9   978 1 84569 010 6
Engineering    Welding technologies                            1 84569 221 7   978 1 84569 221 6
Engineering    Civil engineering                               1 84569 035 4   978 1 84569 035 9
Materials      Corrosion and surface engineering               1 84569 233 0   978 1 84569 233 9
Materials      Corrosion and surface engineering               1 84569 273 X   978 1 84569 273 5
Mathematics    General mathematics                             1 904275 25 7   978 1 904275 25 1
Engineering    Civil engineering                               1 85573 940 2   978 1 85573 940 6
Food Science   Nestlé functional foods and nutrition series    3 8055 8216 1   978 3 8055 8216 2

Food Science   Food consumers and product development         1 84569 072 9    978 1 84569 072 4
Food Science   Nestlé functional foods and nutrition series   3 8055 8283 8    978 3 8055 8283 4
Food Science   Chilled/frozen and dairy products              1 84569 060 5    978 1 84569 060 1
Materials      Corrosion and surface engineering              1 84569 242 X    978 1 84569 242 1
Materials      Chemistry and general science                  1 904275 30 3    978 1 904275 30 5
Materials      Corrosion and surface engineering              1 84569 232 2    978 1 84569 232 2
Food Science   Quality                                        1 84569 074 5    978 1 84569 074 8
Engineering    Computing and electrical engineering           1 904275 24 9    978 1 904275 24 4
Food Science   Lipids (Including Oily Press Series)           0 9552512 0 6    978 0 9552512 0 7
Food Science   Lipids (Including the Oily Press Series)       0 9552512 1 4    978 0 9552512 1 4
Materials      Polymers and biopolymers                       1 84735 058 5    978 1 84735 058 9
Food Science   Nestlé functional foods and nutrition series   3 8055 8194 7    978 3 8055 8194 3
Food Science   Nestlé functional foods and nutrition series   3 8055 8179 3    978 3 8055 8179 0
Food Science   Chilled/frozen and dairy products              1 84569 153 9    978 1 84569 153 0
Materials      Biomaterials                                   1 84569 036 2    978 1 84569 036 6
Engineering    Civil engineering                              1 84569 071 0    978 1 84569 071 7
Materials      Corrosion and surface engineering              1 84569 241 1    978 1 84569 241 4
Textile        Environmental technology and management        1 84569 115 6    978 1 84569 115 8
Food Science   Functional foods and nutrition                 1 84569 030 3    978 1 84569 030 4
Food Science   Chilled/frozen and dairy products              1 84569 007 9    978 1 84569 007 6
Engineering    Computing and electrical engineering           1 904275 21 4    978 1 904275 21 3
Materials      Corrosion and surface engineering              1 84569 240 3   978 1 84569 240 7
Textile        Intelligent and medical textiles               1 84569 047 8   978 1 84569 047 2
Materials      Corrosion and surface engineering              1 84569 237 3   978 1 84569 237 7
Textile        Clothing                                       1 84569 034 6   978 1 84569 034 2
Food Science   Ingredients                                    1 904275 27 3   978 1 904275 27 5
Food Science   Environmental technology and management        1 84569 025 7   978 1 84569 025 0
Food Science   Chilled/frozen and dairy products              1 84569 213 6   978 1 84569 213 1
Materials      Corrosion and surface engineering              1 84569 239 X   978 1 84569 239 1
Food Science   Safety                                         1 84569 006 0   978 1 84569 006 9
Materials      Polymers and biopolymers                       1 84735 000 3   978 1 84735 000 8
Materials      Corrosion and surface engineering              1 84569 236 5   978 1 84569 236 0
Textile        Colouration and finishing                      1 84569 073 7   978 1 84569 073 1
Textile        Intelligent and medical textiles               1 84569 027 3   978 1 84569 027 4
Materials      Metals mining and processing                   1 84569 175 X   978 1 84569 175 2
Engineering    Civil engineering                              1 84569 116 4   978 1 84569 116 5
Food Science   Ingredients                                    1 84569 018 4   978 1 84569 018 2
Textile        Environmental technology and management        1 84569 214 4   978 1 84569 214 8
Textile        High performance/technical textiles            1 84569 033 8   978 1 84569 033 5
Materials      Plastics and rubber                            1 84735 004 6   978 1 84735 004 6
Materials      Electronic and optical materials               1 84735 009 7   978 1 84735 009 1
Food Science   Nestlé functional foods and nutrition series   3 8055 8219 6   978 3 8055 8219 3
Materials      Plastics and rubber                            1 84735 078 X   978 1 84735 078 7
Food Science   Food consumers and product development         1 84569 009 5   978 1 84569 009 0
Food Science   Safety                                         1 84569 029 X   978 1 84569 029 8
Textile        Natural textile fibres                         1 84569 026 5   978 1 84569 026 7
Textile        Fabric technologies                            1 85573 603 9   978 1 85573 603 0
Textile        High performance/technical textiles            1 85573 607 1   978 1 85573 607 8
Materials      Corrosion and surface engineering              1 84569 235 7   978 1 84569 235 3
Engineering    Civil engineering                              1 84569 234 9   978 1 84569 234 6

Food Science   Meat, fish and eggs                            1 84569 059 1   978 1 84569 059 5
Engineering    Civil engineering                              1 84569 210 1   978 1 84569 210 0
Food Science   Meat, fish and eggs                            1 84569 013 3   978 1 84569 013 7
Food Science   Safety                                         1 84569 028 1   978 1 84569 028 1
Materials      Plastics and rubber                            1 84569 100 8   978 1 84569 100 4
Textile        Fibre/fabric properties and testing            1 84569 057 5   978 1 84569 057 1
Engineering    Fatigue, fracture and failure                  1 85573 948 8   978 1 85573 948 2
Food Science   Safety                                         1 84569 011 7   978 1 84569 011 3
Textile        Yarn technologies                              1 84569 292 6   978 1 84569 292 6
Food Science   Safety                                         1 84569 012 5   978 1 84569 012 0
Engineering    Welding technologies                           1 84569 130 X   978 1 84569 130 1
Food Science   Meat, fish and eggs                            1 84569 050 8   978 1 84569 050 2
Food Science   Ingredients                                    1 85573 971 2   978 1 85573 971 0
Materials      Biomaterials                                   1 84569 138 5   978 1 84569 138 7

Engineering    Fatigue, fracture and failure                  1 84569 124 5   978 1 84569 124 0
Food Science   Meat, fish and eggs                            1 84569 159 8   978 1 84569 159 2
Engineering    Fatigue, fracture and failure                  1 85573 938 0   978 1 85573 938 3
Food Science   Ingredients                                    1 84569 017 6   978 1 84569 017 5
Textile        Clothing                                       1 84569 046 X   978 1 84569 046 5
Food Science   Beverages                                      1 84569 003 6   978 1 84569 003 8
Materials      Polymers and biopolymers                       1 84735 006 2   978 1 84735 006 0
Textile        Intelligent and medical textiles               1 84569 005 2   978 1 84569 005 2
Food Science   Quality                                        1 84569 008 7   978 1 84569 008 3
Materials      Adhesives                                      1 85957 524 2   978 1 85957 524 6
Materials      Transport materials and technologies           1 84569 136 9   978 1 84569 136 3
Materials      Polymer composites                             1 85573 941 0   978 1 85573 941 3
Food Science   Safety                                         1 85957 527 7   978 1 85957 527 7
Materials      Polymers and biopolymers                       1 85957 519 6   978 1 85957 519 2
Materials      Transport materials and technologies           1 84569 197 0   978 1 84569 197 4
Food Science   Functional foods and nutrition                 1 84569 051 6   978 1 84569 051 9
Food Science   Nestlé functional foods and nutrition series   3 8055 8124 6   978 3 8055 8124 0
Food Science   Nestlé functional foods and nutrition series   3 8055 8081 9   978 3 8055 8081 6
Food Science   Nestlé functional foods and nutrition series   3 8055 8095 9   978 3 8055 8095 3
Materials      Plastics and rubber                            1 85957 580 3   978 1 85957 580 2
Materials      Plastics and rubber                            1 84735 002 X   978 1 84735 002 2
Food Science   Lipids (Including the Oily Press Series)       0 9531949 9 X   978 0 9531949 9 5
Food Science   Nestlé functional foods and nutrition series   3 8055 7978 0   978 3 8055 7978 0
Materials      Transport materials and technologies           1 84569 174 1   978 1 84569 174 5
Food Science   Safety                                         1 85573 963 1   978 1 85573 963 5
Materials      Corrosion and surface engineering              1 85573 767 1   978 1 85573 767 9
Engineering    Welding technologies                           1 85573 947 X   978 1 85573 947 5
Engineering    Civil engineering                              1 85573 967 4   978 1 85573 967 3
Engineering    Mechanical engineering and general materials   1 84569 157 1   978 1 84569 157 8
Textile        Colouration and finishing                      1 85573 951 8   978 1 85573 951 2
Textile        Clothing                                       1 84569 052 4   978 1 84569 052 6
Engineering    Civil engineering                              1 85573 943 7   978 1 85573 943 7
Textile        Clothing                                       1 85573 925 9   978 1 85573 925 3
Finance        Metals                                         1 84569 154 7   978 1 84569 154 7
Materials      Plastics and rubber                            1 85957 570 6   978 1 85957 570 3
Materials      Polymers and biopolymers                       1 85957 492 0   978 1 85957 492 8
Materials      Metals mining and processing                   1 84569 049 4   978 1 84569 049 6
Food Science   Cereal products and snack foods                1 85573 962 3   978 1 85573 962 8
Food Science   Quality                                        1 85573 966 6   978 1 85573 966 6
Textile        Environmental technology and management        1 85573 952 6   978 1 85573 952 9
Food Science   Quality                                        1 85573 960 7   978 1 85573 960 4
Food Science   Quality                                        1 85573 959 3   978 1 85573 959 8
Engineering    Computing and electrical engineering           1 904275 26 5   978 1 904275 26 8

Engineering    Mechanical engineering and general materials   1 85573 933 X   978 1 85573 933 8
Materials      Polymer composites                             1 85573 969 0   978 1 85573 969 7
Materials      Plastics and rubber                            1 85957 555 2   978 1 85957 555 0
Materials      Fire retardant materials                       1 85573 935 6   978 1 85573 935 2
Textile        Colouration and finishing                      1 85573 923 2   978 1 85573 923 9
Engineering    Mechanical engineering and general materials   1 84569 110 5   978 1 84569 110 3
Food Science   Quality                                        1 85573 965 8   978 1 85573 965 9
Food Science   Chocolate and confectionery                    0 95580 852 9   978 0 95580 852 4
Materials      Ceramics                                       1 85573 942 9   978 1 85573 942 0
Food Science   Safety                                         1 85573 728 0   978 1 85573 728 0
Materials      Corrosion and surface engineering              1 85573 929 1   978 1 85573 929 1
Materials      Plastics and rubber                            1 85957 513 7   978 1 85957 513 0
Engineering    Mechanical engineering and general materials   1 84569 119 9   978 1 84569 119 6
Engineering    Civil engineering                              1 85957 491 2   978 1 85957 491 1
Textile        Environmental technology and management        1 85573 916 X   978 1 85573 916 1
Textile        Intelligent and medical textiles               1 85573 683 7   978 1 85573 683 2
Engineering    Computing and electrical engineering           1 898563 49 7   978 1 898563 49 5
Materials      Metallurgy                                     1 84569 101 6   978 1 84569 101 1
Textile        Fibre/fabric properties and testing            1 85573 918 6   978 1 85573 918 5
Food Science   Safety                                         1 85573 957 7   978 1 85573 957 4
Materials      Ceramics                                       1 85573 932 1   978 1 85573 932 1
Textile        High performance/technical textiles            1 85573 921 6   978 1 85573 921 5
Finance        Commodities                                    1 85573 439 7   978 1 85573 439 5
Food Science   Functional foods and nutrition                 1 85573 958 5   978 1 85573 958 1
Engineering    Fatigue, fracture and failure                  1 85573 771 X   978 1 85573 771 6
Materials      Metallurgy                                     1 85573 927 5   978 1 85573 927 7
Materials      Electronic and optical materials               1 85573 931 3   978 1 85573 931 4
Engineering    Welding technologies                           1 85573 970 4   978 1 85573 970 3
Textile        Fibre/fabric properties and testing            1 85573 917 8   978 1 85573 917 8
Materials      Biomaterials                                   1 85573 737 X   978 1 85573 737 2
Engineering    Civil engineering                              1 85573 939 9   978 1 85573 939 0
Textile        Fibre/fabric properties and testing            1 85573 919 4   978 1 85573 919 2
Materials      Composites                                     1 85573 936 4   978 1 85573 936 9
Textile        High performance/technical textiles            1 85573 922 4   978 1 85573 922 2
Materials      Transport materials and technologies           1 85573 742 6   978 1 85573 742 6
Food Science   Safety                                         1 85573 956 9   978 1 85573 956 7
Food Science   Safety                                         1 85573 954 2   978 1 85573 954 3
Textile        Fabric technologies                            1 84569 056 7   978 1 84569 056 4
Food Science   Safety                                         1 85573 955 0   978 1 85573 955 0
Textile        High performance/technical textiles            1 85573 744 2   978 1 85573 744 0
Food Science   Safety                                         1 85573 953 4   978 1 85573 953 6
Food Science   Technology                                     1 85573 964 X   978 1 85573 964 2
Engineering    Fatigue, fracture and failure                  1 84569 016 8   978 1 84569 016 8
Materials      Biomaterials                                   1 85573 928 3   978 1 85573 928 4
Materials      Plastics and rubber                            1 85957 512 9   978 1 85957 512 3
Food Science   Lipids (Including the Oily Press Series)       0 9531949 8 1   978 0 9531949 8 8
Food Science   Nestlé functional foods and nutrition series   3 8055 7872 5   978 3 8055 7872 1

Materials      Polymers and biopolymers                       1 85957 468 8   978 1 85957 468 3
Food Science   Nestlé functional foods and nutrition series   3 8055 7780 X   978 3 8055 7780 9
Food Science   Nestlé functional foods and nutrition series   3 8055 7850 4   978 3 8055 7850 9
Food Science   Nestlé functional foods and nutrition series   3 8055 7906 3   978 3 8055 7906 3
Food Science   Nestlé functional foods and nutrition series   3 8055 7944 6   978 3 8055 7944 5
Food Science   Nestlé functional foods and nutrition series   3 8055 7945 4   978 3 8055 7945 2

Food Science   Nestlé functional foods and nutrition series   3 8055 7905 5   978 3 8055 7905 6
Materials      Biomaterials                                   1 85957 490 4   978 1 85957 490 4
Materials      Biomaterials                                   1 85573 930 5   978 1 85573 930 7
Textile        Synthetic fibres                               1 85573 601 2   978 1 85573 601 6
Engineering    Civil engineering                              1 85573 738 8   978 1 85573 738 9
Materials      Biomaterials                                   1 85573 838 4   978 1 85573 838 6
Materials      Polymers and biopolymers                       1 85573 934 8   978 1 85573 934 5
Materials      Plastics and rubber                            1 85957 510 2   978 1 85957 510 9
Textile        Intelligent and medical textiles               1 85573 605 5   978 1 85573 605 4
Textile        Natural textile fibres                         1 85573 684 5   978 1 85573 684 9
Mathematics    Statistics                                     1 904275 19 2   978 1 904275 19 0
Materials      Adhesives                                      1 85573 741 8   978 1 85573 741 9
Engineering    Weld design                                    1 85573 589 X   978 1 85573 589 7
Materials      Adhesives                                      1 85957 495 5   978 1 85957 495 9
Engineering    Civil engineering                              1 85573 768 X   978 1 85573 768 6
Food Science   Cereal products and snack foods                1 84569 479 1   978 1 84569 479 1

Mathematics    General mathematics                            1 898563 98 5   978 1 898563 98 3
Materials      Polymers and biopolymers                       1 85957 389 4   978 1 85957 389 1
Mathematics    Applied mathematics                            1 904275 01 X   978 1 904275 01 5
Textile        Synthetic fibres                               1 85573 588 1   978 1 85573 588 0
Textile        Fibre/fabric properties and testing            1 85573 904 6   978 1 85573 904 8
Environment    Water management                               1 904275 17 6   978 1 904275 17 6

Materials      Polymers and biopolymers                       1 85957 449 1   978 1 85957 449 2
Food Science   Beverages                                      1 85573 490 7   978 1 85573 490 6
Textile        Clothing                                       1 85573 745 0   978 1 85573 745 7
Environment    Sustainable production                         1 85573 739 6   978 1 85573 739 6
Food Science   Functional foods and nutrition                 1 85573 735 3   978 1 85573 735 8
Food Science   Safety                                         1 85573 734 5   978 1 85573 734 1
Textile        Colouration and finishing                      1 85573 905 4   978 1 85573 905 5
Food Science   Ingredients                                    1 85573 731 0   978 1 85573 731 0
Food Science   Safety                                         1 85573 733 7   978 1 85573 733 4
Food Science   Technology                                     1 85573 730 2   978 1 85573 730 3
Materials      Steel                                          1 85573 766 3   978 1 85573 766 2
Finance        Commodities                                    1 85573 472 9   978 1 85573 472 2
Food Science   Functional foods and nutrition                 1 85573 725 6   978 1 85573 725 9
Food Science   Lipids (Including the Oily Press Series)       0 9531949 7 3   978 0 9531949 7 1
Food Science   Nestlé functional foods and nutrition series   3 8055 7720 6   978 3 8055 7720 5
Textile        Colouration and finishing                      0 90195 682 1   978 0 90195 682 8
Food Science   Nestlé functional foods and nutrition series   3 8055 7649 8   978 3 8055 7649 9
Food Science   Nestlé functional foods and nutrition series   3 8055 7756 7   978 3 8055 7756 4
Materials      Adhesives                                      1 85957 436 X   978 1 85957 436 2
Materials      Polymer composites                             1 85957 487 4   978 1 85957 487 4
Materials      Polymers and biopolymers                       1 85957 446 7   978 1 85957 446 1
Food Science   Meat, fish and eggs                            1 85573 727 2   978 1 85573 727 3
Materials      Composites                                     1 85573 831 7   978 1 85573 831 7

Food Science   Nestlé functional foods and nutrition series   3 8055 7782 6   978 3 8055 7782 3
Food Science   Quality                                        1 85573 732 9   978 1 85573 732 7
Mathematics    General mathematics                            1 898563 99 3   978 1 898563 99 0
Materials      Steel                                          1 84265 129 3   978 1 84265 129 2
Food Science   Safety                                         1 898563 96 9   978 1 898563 96 9
Engineering    Civil engineering                              1 85573 736 1   978 1 85573 736 5
Food Science   Ingredients                                    1 85573 723 X   978 1 85573 723 5
Textile        High performance/technical textiles            1 85573 606 3   978 1 85573 606 1
Food Science   Safety                                         1 85573 729 9   978 1 85573 729 7
Food Science   Quality                                        1 85573 724 8   978 1 85573 724 2
Food Science   Ingredients                                    1 85573 721 3   978 1 85573 721 1
Materials      Plastics and rubber                            1 85957 435 1   978 1 85957 435 5
Food Science   Safety                                         1 85573 722 1   978 1 85573 722 8
Textile        Design and product development                 1 85573 743 4   978 1 85573 743 3
Materials      Corrosion and surface engineering              1 898563 11 X   978 1 898563 11 2
Engineering    Marine engineering and underwater welding      1 89929 399 X   978 1 89929 399 5
Mathematics    Geometry and topology                             1 898563 97 7   978 1 898563 97 6
Materials      Composites                                        1 85573 608 X   978 1 85573 608 5
Engineering    Inspection and testing                            1 85573 688 8   978 1 85573 688 7
Food Science   Technology                                        1 85573 530 X   978 1 85573 530 9
Food Science   Quality                                           1 85573 526 1   978 1 85573 526 2
Materials      Composites                                        1 85573 769 8   978 1 85573 769 3
Materials      Steel                                             1 85573 719 1   978 1 85573 719 8
Food Science   Environmental technology and management           1 85573 677 2   978 1 85573 677 1
Textile        Colouration and finishing                         1 85573 610 1   978 1 85573 610 8
Food Science   Meat, fish and eggs                               1 85573 715 9   978 1 85573 715 0
Food Science   Cereal products and snack foods                   1 85573 553 9   978 1 85573 553 8
Engineering    Civil engineering                                 1 85573 695 0   978 1 85573 695 5
Food Science   Quality                                           1 85573 674 8   978 1 85573 674 0
Environment    Transport planning                                1 85573 614 4   978 1 85573 614 6
Engineering    Welding technologies                              1 85573 687 X   978 1 85573 687 0
Food Science   Chilled/frozen and dairy products                 1 85573 676 4   978 1 85573 676 4
Finance        Commodities                                       1 85573 456 7   978 1 85573 456 2
Food Science   Safety                                            1 85573 466 4   978 1 85573 466 1
Environment    Sustainable production                            1 85573 713 2   978 1 85573 713 6
Materials      Plastics and rubber                               1 85573 599 7   978 1 85573 599 6
Textile        Yarn technologies                                 1 85573 696 9   978 1 85573 696 2
Engineering    Welding technologies                              1 85573 689 6   978 1 85573 689 4
Food Science   Quality                                           1 85573 673 X   978 1 85573 673 3
Textile        Colouration and finishing                         0 901956 81 3   978 0 901956 81 1
Environment    Water management                                  1 898563 81 0   978 1 898563 81 5
Mathematics    General mathematics                               1 904275 04 4   978 1 904275 04 6
Food Science   Ingredients                                       1 85573 669 1   978 1 85573 669 6
Food Science   Safety                                            1 85573 670 5   978 1 85573 670 2
Food Science   Technology                                        1 85573 675 6   978 1 85573 675 7
Textile        Environmental technology and management           1 85573 541 5   978 1 85573 541 5
Food Science   Nestlé functional foods and nutrition series      3 8055 7554 8   978 3 8055 7554 6
Mathematics    Mathematical modelling and scientific computing   1 904275 03 6   978 1 904275 03 9
Food Science   Nestlé functional foods and nutrition series      3 8055 7540 8   978 3 8055 7540 9
Food Science   Lipids (Including the Oily Press Series)          0 9531949 4 9   978 0 9531949 4 0
Food Science   Lipids (Including the Oily Press Series)          0 9531949 3 0   978 0 9531949 3 3
Food Science   Nestlé functional foods and nutrition series      3 8055 7559 9   978 3 8055 7559 1
Food Science   Nestlé functional foods and nutrition series      3 8055 7640 4   978 3 8055 7640 6
Food Science   Lipids (Including the Oily Press Series)          0 9531949 6 5   978 0 9531949 6 4
Food Science   Functional foods and nutrition                    1 85573 672 1   978 1 85573 672 6
Food Science   Ingredients                                       1 85573 706 X   978 1 85573 706 8
Mathematics    Mathematical modelling and scientific computing   1 904275 05 2   978 1 904275 05 3
Textile        Design and product development                    1 85573 694 2   978 1 85573 694 8
Textile        Design and product development                    1 85573 693 4   978 1 85573 693 1
Food Science   Quality                                           1 85573 449 4   978 1 85573 449 4
Mathematics    Mathematics for engineers                         1 904275 10 9   978 1 904275 10 7
Food Science   Functional foods and nutrition                    1 85573 584 9   978 1 85573 584 2
Environment    Urban development                                 1 85573 685 3   978 1 85573 685 6
Food Science   Functional foods and nutrition                    1 85573 671 3   978 1 85573 671 9
Finance        Commodities                                       1 85573 534 2   978 1 85573 534 7
Textile        Environmental technology and management           0 901956 80 5   978 0 901956 80 4
Textile        Colouration and finishing                         0 901956 79 1   978 0 901956 79 8
Materials      Fire retardant materials                          1 85957 385 1   978 1 85957 385 3
Engineering    Welding technologies                             3 87155 791 9   978 3 87155 791 0
Mathematics    Applied mathematics                              1 898563 91 8   978 1 898563 91 4
Engineering    Civil engineering                                1 898563 85 3   978 1 898563 85 3
Materials      Chemistry and general science                    1 898563 83 7   978 1 898563 83 9
Finance        Financial markets                                1 85573 596 2   978 1 85573 596 5
Engineering    Inspection and testing                           1 85573 587 3   978 1 85573 587 3
Materials      Corrosion and surface engineering                1 85573 613 6   978 1 85573 613 9
Textile        Yarn technologies                                1 85573 577 6   978 1 85573 577 4
Materials      Biomaterials                                     1 85573 570 9   978 1 85573 570 5

Food Science   Safety                                           1 898563 87 X   978 1 898563 87 7
Materials      Chemistry and general science                    1 898563 71 3   978 1 898563 71 6
Food Science   Safety                                           1 85573 585 7   978 1 85573 585 9
Engineering    Welding technologies                             1 85573 567 9   978 1 85573 567 5
Materials      Electronic and optical materials                 1 85573 612 8   978 1 85573 612 2
Environment    Transport planning                               1 85573 581 4   978 1 85573 581 1
Food Science   Meat, fish and eggs                              1 85573 583 0   978 1 85573 583 5
Engineering    Civil engineering                                1 898563 94 2   978 1 898563 94 5
Mathematics    Geometry and topology                            1 904275 00 1   978 1 904275 00 8
Food Science   Quality                                          1 85573 590 3   978 1 85573 590 3
Food Science   Quality                                          1 85573 464 8   978 1 85573 464 7
Food Science   Fruit and vegetables                             1 85573 548 2   978 1 85573 548 4
Food Science   Technology                                       1 85573 547 4   978 1 85573 547 7
Food Science   Meat, fish and eggs                              1 85573 552 0   978 1 85573 552 1
Finance        Metals                                           1 85573 071 5   978 1 85573 071 7
Food Science   Fruit and vegetables                             1 85573 549 0   978 1 85573 549 1
Textile        High performance/technical textiles              0 90897 425 6   978 0 90897 425 2
Textile        Colouration and finishing                        1 84569 126 1   978 1 84569 126 4
Food Science   Nestlé functional foods and nutrition series     3 8055 7419 3   978 3 8055 7419 8
Textile        Natural textile fibres                           1 85573 574 1   978 1 85573 574 3
Textile        Colouration and finishing                        1 85573 576 8   978 1 85573 576 7
Food Science   Technology                                       1 904007 29 5   978 1 904007 29 6
Materials      Metallurgy                                       1 85573 569 5   978 1 85573 569 9
Food Science   Meat, fish and eggs                              1 85573 442 7   978 1 85573 442 5
Mathematics    General mathematics                              1 898563 04 7   978 1 898563 04 4
Materials      Chemistry and general science                    1 898563 76 4   978 1 898563 76 1
Engineering    Welding practice (including health and safety)   1 85573 538 5   978 1 85573 538 5
Finance        Metals                                           1 85573 592 X   978 1 85573 592 7
Finance        Metals                                           1 85573 593 8   978 1 85573 593 4
Finance        Metals                                           1 85573 594 6   978 1 85573 594 1
Finance        Metals                                           1 85573 591 1   978 1 85573 591 0
Mathematics    General mathematics                              1 898563 79 9   978 1 898563 79 2
Engineering    Civil engineering                                1 898563 86 1   978 1 898563 86 0
Food Science   Fruit and vegetables                             1 85573 467 2   978 1 85573 467 8
Mathematics    Applied mathematics                              1 898563 84 5   978 1 898563 84 6
Environment    Urban development                                1 85573 531 8   978 1 85573 531 6
Food Science   Safety                                           1 85573 563 6   978 1 85573 563 7
Environment    Atmospheric pollution, toxins and wastes         1 898563 93 4   978 1 898563 93 8
Textile        Design and product development                   1 87037 239 5   978 1 87037 239 8
Materials      Metallurgy                                       3 514 00648 2   978 3 514 00648 5
Textile        High performance/technical textiles              1 85957 277 4   978 1 85957 277 1
Textile        Colouration and finishing                        0 901956 77 5   978 0 901956 77 4
Materials      Plastics and rubber                               1 85957 312 6   978 1 85957 312 9
Textile        Colouration and finishing                         0 901956 78 3   978 0 901956 78 1
Textile        Yarn technologies                                 1 87037 249 2   978 1 87037 249 7
Textile        Clothing                                          1 87037 250 6   978 1 87037 250 3
Textile        Design and product development                    1 87037 248 4   978 1 87037 248 0
Textile        Design and product development                    1 87037 244 1   978 1 87037 244 2
Textile        Design and product development                    1 87037 237 9   978 1 87037 237 4
Food Science   Quality                                           1 84569 600 X   978 1 84569 600 9
Finance        Commodities                                       1 85573 465 6   978 1 85573 465 4
Mathematics    Mathematics for engineers                         1 898563 89 6   978 1 898563 89 1
Mathematics    Mathematical modelling and scientific computing   1 898563 66 7   978 1 898563 66 2
Materials      Polymers and biopolymers                          1 85573 421 4   978 1 85573 421 0
Textile        Natural textile fibres                            1 85573 540 7   978 1 85573 540 8
Materials      Polymers and biopolymers                          1 85573 545 8   978 1 85573 545 3
Textile        High performance/technical textiles               1 85573 539 3   978 1 85573 539 2
Textile        Yarn technologies                                 1 85573 575 X   978 1 85573 575 0
Textile        Intelligent and medical textiles                  1 85573 546 6   978 1 85573 546 0
Food Science   Quality                                           1 85573 560 1   978 1 85573 560 6
Textile        Design and product development                    1 85573 573 3   978 1 85573 573 6
Food Science   Food consumers and product development            1 84569 722 7   978 1 84569 722 8
Food Science   Technology                                        1 904007 08 2   978 1 904007 08 1
Food Science   Ingredients                                       1 85573 562 8   978 1 85573 562 0
Materials      Plastics and rubber                               1 85573 379 X   978 1 85573 379 4
Food Science   Chilled/frozen and dairy products                 0 905748 83 2   978 0 905748 83 2
Finance        Commodities                                       1 85573 190 8   978 1 85573 190 5
Finance        Energy                                            1 85573 446 X   978 1 85573 446 3
Finance        E-commerce law and environmental reporting        1 85573 471 0   978 1 85573 471 5
Food Science   Quality                                           1 85573 450 8   978 1 85573 450 0
Finance        Financial services                                1 85573 512 1   978 1 85573 512 5
Finance        Financial services                                1 85573 372 2   978 1 85573 372 5
Finance        Financial services                                1 85573 544 X   978 1 85573 544 6
Food Science   Technology                                        1 85573 559 8   978 1 85573 559 0
Finance        Metals                                            1 85573 248 3   978 1 85573 248 3
Food Science   Quality                                           1 85573 557 1   978 1 85573 557 6
Food Science   Quality                                           1 85573 565 2   978 1 85573 565 1
Mathematics    Geometry and topology                             1 898563 77 2   978 1 898563 77 8
Textile        Colouration and finishing                         1 84569 065 6   978 1 84569 065 6
Food Science   Nestlé functional foods and nutrition series      3 8055 7073 2   978 3 8055 7073 2
Finance        Commodities                                       1 85573 511 3   978 1 85573 511 8
Food Science   Safety                                            1 85573 504 0   978 1 85573 504 0
Engineering    Welding technologies                              1 85573 578 4   978 1 85573 578 1
Food Science   Safety                                            1 85573 462 1   978 1 85573 462 3
Textile        Natural textile fibres                            1 85573 459 1   978 1 85573 459 3
Finance        E-commerce law and environmental reporting        1 85573 580 6   978 1 85573 580 4
Textile        Fabric technologies                               1 85573 333 1   978 1 85573 333 6
Food Science   Technology                                        1 85573 556 3   978 1 85573 556 9
Food Science   Technology                                        1 85573 558 X   978 1 85573 558 3
Food Science   Cereal products and snack foods                   1 85573 564 4   978 1 85573 564 4
Materials      Chemistry and general science                     1 898563 80 2   978 1 898563 80 8
Finance        Commodities                                       1 85573 461 3   978 1 85573 461 6
Finance        Treasury management, futures and options          1 85573 247 5   978 1 85573 247 6
Food Science   Cereal products and snack foods                   1 85573 561 X   978 1 85573 561 3
Food Science Functional foods and nutrition                     1 85573 463 X 978 1 85573 463 0
Textile      Intelligent and medical textiles                   1 85573 494 X 978 1 85573 494 4

Finance        Metals                                           1 85573 151 7   978 1 85573 151 6
Textile        High performance/technical textiles              1 85573 419 2   978 1 85573 419 7
Food Science   Cereal products and snack foods                  1 85573 543 1   978 1 85573 543 9
Engineering    Welding practice (including health and safety)   3 87155 790 0   978 3 87155 790 3
Textile        Colouration and finishing                        0 901956 76 7   978 0 901956 76 7
Materials      Plastics and rubber                              1 85957 208 1   978 1 85957 208 5
Mathematics    Geometry and topology                            1 898563 69 1   978 1 898563 69 3
Materials      Composites                                       1 85957 263 4   978 1 85957 263 4
Textile        Clothing                                         1 87037 238 7   978 1 87037 238 1
Engineering    Welding technologies                             1 85573 597 0   978 1 85573 597 2
Mathematics    Applied mathematics                              1 898563 14 4   978 1 898563 14 3
Textile        High performance/technical textiles              1 85573 493 1   978 1 85573 493 7
Engineering    Weld design                                      1 85573 537 7   978 1 85573 537 8
Textile        High performance/technical textiles              1 85573 385 4   978 1 85573 385 5
Materials      Composites                                       1 85573 422 2   978 1 85573 422 7
Materials      Composites                                       1 85573 312 9   978 1 85573 312 1
Textile        Design and product development                   1 85573 492 3   978 1 85573 492 0
Materials      Composites                                       1 85573 423 0   978 1 85573 423 4
Food Science   Functional foods and nutrition                   1 85573 777 9   978 1 85573 777 8
Finance        Commodities                                      1 85573 542 3   978 1 85573 542 2
Materials      Electronic and optical materials                 1 85573 488 5   978 1 85573 488 3
Food Science   Safety                                           1 85573 448 6   978 1 85573 448 7
Finance        Metals                                           1 85573 345 5   978 1 85573 345 9
Materials      Composites                                       1 85573 550 4   978 1 85573 550 7

Engineering    Civil engineering                                1 898563 70 5   978 1 898563 70 9
Food Science   Quality                                          1 85573 500 8   978 1 85573 500 2
Food Science   Safety                                           1 85573 497 4   978 1 85573 497 5
Finance        Energy                                           1 85573 105 3   978 1 85573 105 9
Food Science   Cereal products and snack foods                  1 85573 498 2   978 1 85573 498 2
Food Science   Quality                                          1 85573 496 6   978 1 85573 496 8
Materials      Composites                                       1 85573 425 7   978 1 85573 425 8
Food Science   Chilled/frozen and dairy products                1 85573 412 5   978 1 85573 412 8
Materials      Polymer composites                               1 85573 453 2   978 1 85573 453 1
Finance        Investment                                       1 85573 451 6   978 1 85573 451 7

Finance        Investment                                       1 85573 458 3 978 1 85573 458 6

Finance        Commodities                                      1 85573 373 0   978 1 85573 373 2
Finance        E-commerce law and environmental reporting       1 85573 470 2   978 1 85573 470 8
Food Science   Lipids (Including the Oily Press Series)         0 9531949 2 2   978 0 9531949 2 6
Finance        Commodities                                      1 85573 457 5   978 1 85573 457 9
Engineering    Fatigue, fracture and failure                    1 85573 522 9   978 1 85573 522 4
Finance        Metals                                           1 85573 346 3   978 1 85573 346 6
Engineering    Marine engineering and underwater welding        1 85573 239 4   978 1 85573 239 1
Food Science   Ingredients                                      1 85573 788 4   978 1 85573 788 4
Finance        Treasury management, futures and options         1 85573 491 5   978 1 85573 491 3
Materials      Chemistry and general science                    1 898563 41 1   978 1 898563 41 9
Engineering    Welding practice (including health and safety)   1 85573 445 1   978 1 85573 445 6
Engineering    Inspection and testing                           1 85573 516 4   978 1 85573 516 3
Engineering    Welding practice (including health and safety)   1 85573 519 9   978 1 85573 519 4
Engineering    Welding practice (including health and safety)   1 85573 515 6   978 1 85573 515 6
Materials      Corrosion and surface engineering                1 85573 517 2   978 1 85573 517 0
Engineering    Fatigue, fracture and failure                    1 85573 520 2   978 1 85573 520 0
Engineering    Fatigue, fracture and failure                    1 85573 521 0   978 1 85573 521 7
Engineering    Welding technologies                             1 85573 518 0   978 1 85573 518 7
Engineering    Inspection and testing                           1 84265 005 X   978 1 84265 005 9
Materials      Polymers and biopolymers                         1 85957 191 3   978 1 85957 191 0
Materials      Plastics and rubber                              1 85957 222 7   978 1 85957 222 1
Materials      Metals mining and processing                     3 514 00640 7   978 3 514 00640 9
Environment    Soil and pesticides                              1 85573 807 4   978 1 85573 807 2
Finance        E-commerce law and environmental reporting       1 85573 469 9   978 1 85573 469 2
Textile        Colouration and finishing                        0 901956 75 9   978 0 901956 75 0
Materials      Chemistry and general science                    1 898563 47 0   978 1 898563 47 1
Engineering    Welding practice (including health and safety)   1 85573 429 X   978 1 85573 429 6
Engineering    Civil engineering                                1 898563 67 5   978 1 898563 67 9
Engineering    Computing and electrical engineering             1 898563 56 X   978 1 898563 56 3
Materials      Chemistry and general science                    1 898563 50 0   978 1 898563 50 1
Engineering    Weld design                                      1 85573 417 6   978 1 85573 417 3
Engineering    Weld design                                      1 85573 386 2   978 1 85573 386 2
Engineering    Welding practice (including health and safety)   1 85573 495 8   978 1 85573 495 1
Food Science   Ingredients                                      1 85573 443 5   978 1 85573 443 2
Engineering    Fatigue, fracture and failure                    1 85573 444 3   978 1 85573 444 9
Finance        Banking                                          1 85573 436 2   978 1 85573 436 4
Materials      Corrosion and surface engineering                1 85573 348 X   978 1 85573 348 0
Engineering    Welding practice (including health and safety)   1 85573 420 6   978 1 85573 420 3
Finance        Financial services                               1 85573 438 9   978 1 85573 438 8
Textile        High performance/technical textiles              1 85573 376 5   978 1 85573 376 3
Engineering    Civil engineering                                1 898563 55 1   978 1 898563 55 6
Materials      Composites                                       1 85573 473 7   978 1 85573 473 9
Food Science   Fruit and vegetables                             1 84569 597 6   978 1 84569 597 2
Finance        Investment                                       1 85573 435 4   978 1 85573 435 7

Finance     Financial services                                  1 85573 437 0 978 1 85573 437 1
Materials   Chemistry and general science                       1 898563 63 2 978 1 898563 63 1
Mathematics Applied mathematics                                 1 898563 57 8 978 1 898563 57 0

Food Science   Lipids (Including the Oily Press Series)         0 9531949 1 4   978 0 9531949 1 9
Materials      Chemistry and general science                    1 898563 60 8   978 1 898563 60 0
Materials      Metallurgy                                       1 85573 428 1   978 1 85573 428 9
Finance        Financial services                               1 85573 431 1   978 1 85573 431 9
Finance        Financial services                               1 85573 433 8   978 1 85573 433 3
Finance        Financial services                               1 85573 432 X   978 1 85573 432 6
Engineering    Marine engineering and underwater welding        1 85573 427 3   978 1 85573 427 2
Food Science   Ingredients                                      0 905748 32 8   978 0 905748 32 0
Food Science   Quality                                          1 85573 773 6   978 1 85573 773 0
Finance        Treasury management, futures and options         1 85573 336 6   978 1 85573 336 7
Engineering    Inspection and testing                           1 85573 430 3   978 1 85573 430 2
Engineering    Civil engineering                                1 85573 378 1   978 1 85573 378 7

Engineering Fatigue, fracture and failure                       1 85573 424 9 978 1 85573 424 1
Finance        Financial services                               1 85573 413 3   978 1 85573 413 5
Food Science   Fruit and vegetables                             1 85573 774 4   978 1 85573 774 7
Textile        Fibre/fabric properties and testing              1 85573 367 6   978 1 85573 367 1
Finance        Treasury management, futures and options         1 85573 327 7   978 1 85573 327 5
Food Science   Functional foods and nutrition                   1 85573 790 6   978 1 85573 790 7
Food Science   Functional foods and nutrition                   1 85573 793 0   978 1 85573 793 8
Engineering    Welding technologies                             1 85573 416 8   978 1 85573 416 6
Materials      Polymers and biopolymers                         1 85573 824 4   978 1 85573 824 9
Environment    Soil and pesticides                              1 85573 815 5   978 1 85573 815 7
Textile        Yarn technologies                                1 87037 235 2   978 1 87037 235 0
Food Science   Safety                                           1 85573 808 2   978 1 85573 808 9
Textile        Fabric technologies                              1 87037 225 5   978 1 87037 225 1
Engineering    Dictionaries and standards                       3 514 00622 9   978 3 514 00622 5
Materials      Corrosion and surface engineering                1 85573 822 8   978 1 85573 822 5
Textile        Yarn technologies                                1 87037 203 4   978 1 87037 203 9
Materials      Steel                                            3 514 00637 7   978 3 514 00637 9
Engineering    Dictionaries and standards                       3 87260 134 2   978 3 87260 134 6
Food Science   Safety                                           1 85573 803 1   978 1 85573 803 4
Textile        High performance/technical textiles              1 87037 221 2   978 1 87037 221 3
Food Science   Safety                                           1 85573 810 4   978 1 85573 810 2
Textile        Environmental technology and management          1 85573 426 5   978 1 85573 426 5
Finance        Metals                                           1 85573 347 1   978 1 85573 347 3
Materials      Plastics and rubber                              1 85573 320 X   978 1 85573 320 6
Finance        Commodities                                      1 85573 405 2   978 1 85573 405 0
Engineering    Civil engineering                                1 898563 59 4   978 1 898563 59 4
Finance        Investment                                       1 85573 411 7   978 1 85573 411 1
Engineering    Marine engineering and underwater welding        1 85573 825 2   978 1 85573 825 6
Engineering    Computing and electrical engineering             1 898563 58 6   978 1 898563 58 7
Engineering    Welding practice (including health and safety)   1 85573 415 X   978 1 85573 415 9
Finance        Treasury management, futures and options         1 85573 387 0   978 1 85573 387 9
Materials      Chemistry and general science                    1 898563 39 X   978 1 898563 39 6
Engineering    Computing and electrical engineering             1 898563 52 7   978 1 898563 52 5
Mathematics    Mathematics for engineers                        1 898563 51 9   978 1 898563 51 8
Finance        Investment                                       1 85573 404 4   978 1 85573 404 3
Materials      Corrosion and surface engineering                1 85573 369 2   978 1 85573 369 5
Engineering    Marine engineering and underwater welding        1 85573 388 9   978 1 85573 388 6
Textile        Fibre/fabric properties and testing              1 85573 319 6   978 1 85573 319 0
Materials      Composites                                       1 85573 240 8   978 1 85573 240 7
Finance        Financial services                               1 85573 331 5   978 1 85573 331 2
Food Science   Ingredients                                      1 85573 789 2   978 1 85573 789 1
Finance        Treasury management, futures and options         1 85573 253 X   978 1 85573 253 7
Food Science   Technology                                       1 85573 394 3   978 1 85573 394 7
Food Science   Quality                                          1 85573 791 4   978 1 85573 791 4
Materials      Composites                                       1 85573 406 0   978 1 85573 406 7
Finance        Commodities                                      1 85573 252 1   978 1 85573 252 0
Food Science   Cereal products and snack foods                  1 85573 292 0   978 1 85573 292 6
Food Science   Cereal products and snack foods                  1 85573 295 5   978 1 85573 295 7
Food Science   Cereal products and snack foods                  1 85573 296 3   978 1 85573 296 4
Food Science   Cereal products and snack foods                  1 85573 297 1   978 1 85573 297 1
Food Science   Cereal products and snack foods                  1 85573 293 9   978 1 85573 293 3
Food Science   Cereal products and snack foods                  1 85573 294 7   978 1 85573 294 0
Finance        Financial markets                                1 85573 340 4   978 1 85573 340 4
Textile        Yarn technologies                                1 87081 298 0   978 1 87081 298 6
Food Science   Quality                                          1 85573 792 2   978 1 85573 792 1
Textile        Fibre/fabric properties and testing              1 87037 219 0   978 1 87037 219 0
Mathematics    Statistics                                       1 898563 35 7   978 1 898563 35 8
Finance        Commodities                                      1 85573 322 6   978 1 85573 322 0
Textile        Clothing                                         1 87081 273 5   978 1 87081 273 3
Textile        Design and product development                   1 87037 216 6   978 1 87037 216 9
Textile        Fibre/fabric properties and testing              1 87037 215 8   978 1 87037 215 2
Engineering    Computing and electrical engineering             1 904275 37 0   978 1 904275 37 4
Textile        Colouration and finishing                        0 901956 74 0   978 0 901956 74 3
Environment    Atmospheric pollution, toxins and wastes         1 85573 801 5   978 1 85573 801 0
Materials      Metals mining and processing                     3 514 00620 2   978 3 514 00620 1
Materials      Adhesives                                        1 85573 259 9   978 1 85573 259 9
Environment    Soil and pesticides                              1 85573 806 6   978 1 85573 806 5
Materials      Fire retardant materials                         1 85573 804 X   978 1 85573 804 1
Food Science   Technology                                       1 85573 823 6   978 1 85573 823 2
Food Science   Quality                                          1 85573 776 0   978 1 85573 776 1
Textile        Design and product development                   1 87037 201 8   978 1 87037 201 5
Engineering    Computing and electrical engineering             1 898563 40 3   978 1 898563 40 2
Finance        Banking                                          1 85573 329 3   978 1 85573 329 9

Finance        Banking                                          1 85573 328 5   978 1 85573 328 2
Finance        Banking                                          1 85573 330 7   978 1 85573 330 5
Materials      Composites                                       1 85573 254 8   978 1 85573 254 4
Materials      Steel                                            1 85573 318 8   978 1 85573 318 3
Finance        Banking                                          1 85573 177 0   978 1 85573 177 6
Materials      Chemistry and general science                    1 898563 38 1   978 1 898563 38 9
Finance        Treasury management, futures and options         1 85573 344 7   978 1 85573 344 2
Finance        Treasury management, futures and options         1 85573 335 8   978 1 85573 335 0
Finance        Treasury management, futures and options         1 85573 323 4   978 1 85573 323 7
Engineering    Welding practice (including health and safety)   1 85573 343 9   978 1 85573 343 5

Materials      Metallurgy                                       1 85573 243 2   978 1 85573 243 8
Food Science   Quality                                          1 85573 299 8   978 1 85573 299 5
Engineering    Fatigue, fracture and failure                    1 85573 338 2   978 1 85573 338 1
Finance        Banking                                          1 85573 206 8   978 1 85573 206 3
Food Science   Lipids (Including the Oily Press Series)         0 9514171 7 7   978 0 9514171 7 1
Engineering    Civil engineering                                1 898563 33 0   978 1 898563 33 4
Mathematics    Mathematics for engineers                        1 898563 34 9   978 1 898563 34 1
Mathematics    Applied mathematics                              1 898563 12 8   978 1 898563 12 9
Food Science   Technology                                       1 84569 594 1   978 1 84569 594 1
Engineering    Computing and electrical engineering             1 898563 30 6   978 1 898563 30 3
Food Science   Ingredients                                      1 898563 31 4   978 1 898563 31 0
Textile        Colouration and finishing                        0 901956 70 8   978 0 901956 70 5
Materials      Chemistry and general science                    1 85573 828 7   978 1 85573 828 7
Materials      Chemistry and general science                    1 898563 37 3   978 1 898563 37 2
Food Science   Quality                                          1 85573 783 3   978 1 85573 783 9
Textile        Synthetic fibres                                 1 85573 334 X   978 1 85573 334 3
Environment    Soil and pesticides                              1 85573 805 8   978 1 85573 805 8
Materials      Plastics and rubber                              1 85573 242 4   978 1 85573 242 1

Food Science Quality                                            1 85573 780 9 978 1 85573 780 8
Finance        Treasury management, futures and options         1 85573 326 9   978 1 85573 326 8
Food Science   Quality                                          1 85573 779 5   978 1 85573 779 2
Environment    Atmospheric pollution, toxins and wastes         1 85573 800 7   978 1 85573 800 3
Engineering    Inspection and testing                           1 85573 314 5   978 1 85573 314 5
Materials      Chemistry and general science                    1 898563 16 0   978 1 898563 16 7
Materials      Metals mining and processing                     3 514 00590 7   978 3 514 00590 7
Engineering    Fatigue, fracture and failure                    1 85573 315 3   978 1 85573 315 2
Engineering    Welding practice (including health and safety)   1 85573 016 2   978 1 85573 016 8
Materials      Polymer composites                               1 85573 220 3   978 1 85573 220 9
Finance        Banking                                          1 85573 244 0   978 1 85573 244 5
Finance        Banking                                          1 85573 250 5   978 1 85573 250 6
Food Science   Technology                                       1 84569 605 0   978 1 84569 605 4
Food Science   Technology                                       1 84569 603 4   978 1 84569 603 0
Food Science   Safety                                           1 85573 274 2   978 1 85573 274 2
Food Science   Lipids (Including the Oily Press Series)         0 9514171 6 9   978 0 9514171 6 4
Food Science   Technology                                       1 84569 604 2   978 1 84569 604 7
Food Science   Technology                                       1 84569 606 9   978 1 84569 606 1
Engineering    Welding practice (including health and safety)   1 85573 219 X   978 1 85573 219 3
Materials      Composites                                       1 85573 304 8   978 1 85573 304 6
Finance        Banking                                          1 85573 246 7   978 1 85573 246 9
Engineering    Fatigue, fracture and failure                    1 85573 264 5   978 1 85573 264 3
Finance        Investment                                       1 85573 245 9   978 1 85573 245 2
Finance        Investment                                       1 85573 339 0   978 1 85573 339 8
Materials      Corrosion and surface engineering                1 85573 260 2   978 1 85573 260 5
Textile        Environmental technology and management          1 85573 306 4   978 1 85573 306 0
Materials      Polymers and biopolymers                         1 85573 305 6   978 1 85573 305 3
Finance        Commodities                                      1 85573 069 3   978 1 85573 069 4
Mathematics    Applied mathematics                              1 898563 27 6   978 1 898563 27 3
Food Science   Technology                                       1 85573 359 5   978 1 85573 359 6
Engineering    Civil engineering                                1 898563 25 X   978 1 898563 25 9
Food Science   Technology                                       1 85573 287 4   978 1 85573 287 2
Materials      Composites                                       1 85573 208 4   978 1 85573 208 7
Food Science   Functional foods and nutrition                   1 85573 794 9   978 1 85573 794 5
Food Science   Cereal products and snack foods                  1 85573 797 3   978 1 85573 797 6
Engineering    Civil engineering                                1 898563 28 4   978 1 898563 28 0
Engineering    Fatigue, fracture and failure                    1 85573 261 0   978 1 85573 261 2
Finance        Banking                                          1 85573 156 8   978 1 85573 156 1
Finance        Treasury management, futures and options         1 85573 180 0   978 1 85573 180 6
Materials      Polymers and biopolymers                         1 85573 212 2   978 1 85573 212 4

Finance        Commodities                                      1 85573 191 6   978 1 85573 191 2
Textile        Colouration and finishing                        1 84569 066 4   978 1 84569 066 3
Finance        Commodities                                      1 85573 215 7   978 1 85573 215 5
Finance        Metals                                           1 85573 043 X   978 1 85573 043 4
Food Science   Technology                                       1 84569 602 6   978 1 84569 602 3
Finance        Commodities                                      1 85573 202 5   978 1 85573 202 5
Textile        Colouration and finishing                        0 901956 69 4   978 0 901956 69 9
Engineering    Fatigue, fracture and failure                    1 85573 213 0   978 1 85573 213 1
Food Science   Dictionaries and other references                1 84569 595 X   978 1 84569 595 8
Finance        Banking                                          1 85573 184 3   978 1 85573 184 4
Materials      Composites                                       1 85573 155 X   978 1 85573 155 4
Finance        Financial markets                                1 85573 116 9   978 1 85573 116 5
Finance        Metals                                           1 85573 100 2   978 1 85573 100 4
Textile        Fabric technologies                              1 87081 276 X   978 1 87081 276 4
Materials      Metals mining and processing                     3 514 00457 9   978 3 514 00457 3
Mathematics    Applied mathematics                              1 898563 06 3   978 1 898563 06 8
Textile        High performance/technical textiles              1 87081 274 3   978 1 87081 274 0
Environment    Atmospheric pollution, toxins and wastes         1 898563 08 X   978 1 898563 08 2
Finance        Investment                                       1 85573 194 0   978 1 85573 194 3
Food Science   Safety                                           1 85573 811 2   978 1 85573 811 9
Textile        Colouration and finishing                        0 901956 68 6   978 0 901956 68 2
Finance        Commodities                                      1 85573 179 7   978 1 85573 179 0

Textile        Fabric technologies                              1 87081 278 6   978 1 87081 278 8
Finance        Energy                                           1 85573 074 X   978 1 85573 074 8
Mathematics    Applied mathematics                              1 898563 21 7   978 1 898563 21 1
Finance        Metals                                           1 85573 103 7   978 1 85573 103 5
Environment    Atmospheric pollution, toxins and wastes         1 898563 03 9   978 1 898563 03 7
Finance        Banking                                          1 85573 176 2   978 1 85573 176 9
Food Science   Chilled/frozen and dairy products                1 85573 775 2   978 1 85573 775 4
Engineering    Welding technologies                             1 85573 088 X   978 1 85573 088 5
Engineering    Welding practice (including health and safety)   1 85573 092 8   978 1 85573 092 2
Food Science   Dictionaries and other references                1 84569 596 8   978 1 84569 596 5
Finance        Commodities                                      1 85573 104 5   978 1 85573 104 2
Materials      Transport materials and technologies             1 85573 039 1   978 1 85573 039 7
Finance        Investment                                       1 85573 109 6   978 1 85573 109 7
Finance        Metals                                           1 85573 301 3   978 1 85573 301 5
Environment    Atmospheric pollution, toxins and wastes         1 85573 799 X   978 1 85573 799 0
Environment    Atmospheric pollution, toxins and wastes         1 85573 816 3   978 1 85573 816 4
Food Science   Technology                                       1 85573 360 9   978 1 85573 360 2
Textile        Synthetic fibres                                 1 87081 261 1   978 1 87081 261 0
Food Science   Safety                                           1 85573 802 3   978 1 85573 802 7
Materials      Polymer composites                               1 85573 129 0   978 1 85573 129 5
Food Science   Cereal products and snack foods                  1 85573 361 7   978 1 85573 361 9
Materials      Composites                                       1 85573 051 0   978 1 85573 051 9
Materials      Corrosion and surface engineering                1 85573 127 4   978 1 85573 127 1
Materials      Chemistry and general science                    1 898563 00 4   978 1 898563 00 6
Finance        Treasury management, futures and options         1 85573 256 4   978 1 85573 256 8
Engineering    Welding technologies                             1 85573 050 2   978 1 85573 050 2
Textile        Yarn technologies                                1 87081 218 2   978 1 87081 218 4
Textile        Yarn technologies                                1 85573 182 7   978 1 85573 182 0
Textile        Colouration and finishing                        0 901956 56 2   978 0 901956 56 9
Materials      Corrosion and surface engineering                1 85573 081 2   978 1 85573 081 6
Finance        Metals                                           1 85573 131 2   978 1 85573 131 8
Engineering    Welding practice (including health and safety)   1 85573 014 6   978 1 85573 014 4
Food Science   Quality                                          1 85573 782 5   978 1 85573 782 2
Finance        Commodities                                      1 85573 098 7   978 1 85573 098 4
Finance        Metals                                           1 85573 072 3   978 1 85573 072 4
Materials      Steel                                            3 514 00378 5   978 3 514 00378 1
Food Science   Functional foods and nutrition                   1 85573 781 7   978 1 85573 781 5
Food Science   Safety                                           1 85573 362 5   978 1 85573 362 6
Materials      Steel                                            1 85573 132 0   978 1 85573 132 5
Textile        Colouration and finishing                        0 901956 54 6   978 0 901956 54 5
Textile        Yarn technologies                                1 87081 255 7   978 1 87081 255 9
Food Science Technology                                         1 85573 820 1 978 1 85573 820 1
Engineering Welding technologies                                1 85573 034 0 978 1 85573 034 2
Engineering Inspection and testing                              1 85573 097 9 978 1 85573 097 7

Engineering    Welding technologies                             1 85573 063 4   978 1 85573 063 2
Finance        Metals                                           1 85573 067 7   978 1 85573 067 0
Food Science   Quality                                          1 84569 601 8   978 1 84569 601 6
Textile        Colouration and finishing                        0 901956 53 8   978 0 901956 53 8
Engineering    Fatigue, fracture and failure                    1 85573 122 3   978 1 85573 122 6
Environment    Atmospheric pollution, toxins and wastes         1 85573 812 0   978 1 85573 812 6
Finance        Metals                                           1 85573 049 9   978 1 85573 049 6
Materials      Polymer composites                               1 85573 086 3   978 1 85573 086 1
Materials      Steel                                            3 514 00377 7   978 3 514 00377 4
Food Science   Fruit and vegetables                             1 84569 599 2   978 1 84569 599 6
Food Science   Cereal products and snack foods                  1 85573 269 6   978 1 85573 269 8
Finance        Treasury management, futures and options         1 85573 075 8   978 1 85573 075 5
Engineering    Welding technologies                             1 85573 020 0   978 1 85573 020 5
Engineering    Weld design                                      1 85573 024 3   978 1 85573 024 3
Engineering    Weld design                                      1 85573 025 1   978 1 85573 025 0
Food Science   Safety                                           1 85573 784 1   978 1 85573 784 6
Materials      Metallurgy                                       1 85573 019 7   978 1 85573 019 9
Food Science   Food consumers and product development           1 84569 598 4   978 1 84569 598 9
Engineering    Welding practice (including health and safety)   1 85573 012 X   978 1 85573 012 0

Engineering    Fatigue, fracture and failure                    1 85573 066 9   978 1 85573 066 3
Food Science   Safety                                           1 85573 814 7   978 1 85573 814 0
Food Science   Quality                                          1 85573 273 4   978 1 85573 273 5
Materials      Polymers and biopolymers                         1 85573 817 1   978 1 85573 817 1
Food Science   Quality                                          1 85573 284 X   978 1 85573 284 1
Environment    Soil and pesticides                              1 85573 813 9   978 1 85573 813 3
Food Science   Safety                                           1 85573 282 3   978 1 85573 282 7
Food Science   Chilled/frozen and dairy products                1 85573 278 5   978 1 85573 278 0
Food Science   Safety                                           1 85573 341 2   978 1 85573 341 1
Food Science   Quality                                          1 85573 787 6   978 1 85573 787 7
Engineering    Fatigue, fracture and failure                    1 85573 013 8   978 1 85573 013 7
Food Science   Functional foods and nutrition                   1 85573 778 7   978 1 85573 778 5
Engineering    Marine engineering and underwater welding        1 85573 006 5   978 1 85573 006 9
Engineering    Welding technologies                             1 85573 005 7   978 1 85573 005 2
Engineering    Welding technologies                             1 85573 027 8   978 1 85573 027 4
Engineering    Welding technologies                             1 85573 008 1   978 1 85573 008 3
Engineering    Fatigue, fracture and failure                    1 85573 004 9   978 1 85573 004 5
Engineering    Weld design                                      1 85573 003 0   978 1 85573 003 8
Food Science   Functional foods and nutrition                   1 85573 277 7   978 1 85573 277 3
Engineering    Welding technologies                             1 85573 002 2   978 1 85573 002 1
Food Science   Technology                                       1 85573 272 6   978 1 85573 272 8
Textile        Colouration and finishing                        0 901956 49 X   978 0 901956 49 1
Textile        Colouration and finishing                        0 901956 48 1   978 0 901956 48 4
Engineering    Inspection and testing                           1 85573 566 0   978 1 85573 566 8
Food Science   Quality                                          1 85573 785 X   978 1 85573 785 3
Food Science   Quality                                          1 85573 795 7   978 1 85573 795 2
Food Science   Quality                                          1 85573 396 X   978 1 85573 396 1
Textile        Synthetic fibres                                 1 85573 485 0   978 1 85573 485 2
Textile     Natural textile fibres           1 85573 484 2   978 1 85573 484 5
Textile     Colouration and finishing        0 901956 31 7   978 0 901956 31 6
Materials   Metals mining and processing     3 514 00298 3   978 3 514 00298 2
Textile     Fabric technologies              1 85573 483 4   978 1 85573 483 8
Materials   Polymers and biopolymers         1 85573 198 3   978 1 85573 198 1
Textile     Design and product development   1 85573 996 8   978 1 85573 996 3
Textile     Design and product development   1 85573 995 X   978 1 85573 995 6
Materials   Metals mining and processing     3 514 00134 0   978 3 514 00134 3
Title


Biomaterials and medical tribology
Ultra precision bearings
Machining and Machine-Tools
Handbook of membrane reactors
Ultra-supercritical coal power plant
Fundamentals of the evaluation and diagnosis of welded structures
Alternative fuels and advanced vehicle technologies
Advances in biorefineries
The biogas handbook
Radioactive waste management and contaminated site clean-up
Coal power plant materials and life assessment
Geoscience of carbon dioxide (CO2) storage
Wind turbine blade design and materials
Fundamentals in food chemistry
Coal utilization in industry
Functional textiles and clothing
Handbook of membrane reactors
Handbook of microalgal bioprocess engineering
Probabilistic safety assessment for optimum nuclear power plant life management (PLiM)

Microbial production of food ingredients, enzymes and nutraceuticals
New analytical approaches for verifying the origin of food
Structural alloys for power plants
Materials ageing and degradation in light water reactors
Improving the safety and quality of nuts
Chemical looping technology for power generation and carbon dioxide (CO2) capture
Biomass combustion science, technology and engineering
Direct-drive renewable energy systems
Handbook of food safety in spices
Electricity transmission, distribution and storage systems
Anti-abrasive nanocoatings
Theory of structure and mechanics of fibrous assemblies and yarns
Modification of fibres for technical applications
Nuclear reactor safety systems
Computer design of diffractive optics
Handbook of Terahertz Technology for Imaging, Sensing, and Communications
Packaging technology
Joining textiles
Joining and assembly of medical materials and devices
Biomaterials for breast implants
Biosensors for medical applications
The global textile and clothing industry
Biocompatibility and performance of medical devices
Irradiation embrittlement of reactor pressure vessels in nuclear power plants
Medical robotics
Handbook of metropolitan sustainability
Nanomedicine
Non-metallic biomaterials for tooth repair and replacement
Metallic films for electronic, optical and magnetic applications
Process control in textile manufacturing
Simulation in textile technology
MEMS for automotive and aerospace applications
Applications of ATILA FEM software to smart materials
Biomedical imaging
Fundamentals of magnesium alloy metallurgy
Encapsulation technologies and delivery systems for food ingredients and nutraceuticals

Functional materials for energy applications
Chemical contaminants and residues in foods
Nuclear fuel cycle science and engineering
Microstructure evolution in metal forming processes
Fibre-rich and wholegrain foods
Computer vision technologies in the food and beverage industries
Waste to energy (WTE) conversion technology
Semiconductor lasers
Ultrasonic transducers
Sterilisation of biomaterials
Robotics and automation in the food industry
Textiles and fashion
Waste electrical and electronic equipment (WEEE) handbook
A quick guide to fitness for service (FFS) assessment of pressure equipment
Modelling, simulation and control of the dyeing process
Biolubricants
Biotextiles as medical implants
Quantum optics with semiconductor nanostructures
MEMs for biomedical applications
Advances in polymer nanocomposites
Intelligent implantable sensor systems for medical applications
Radionuclide behaviour in the natural environment
Durability and reliability of medical polymers
Manufacturing polymer matrix composites
Functional nanofibres and their applications
Advances in brazing
Laser growth and processing of photonic devices
The hip resurfacing handbook
Concentrating solar power (CSP) technology
Woven textiles
Advances in military textiles and personal equipment
Microbial decontamination in the food industry
Handbook of metal injection molding
Adhesives in marine engineering
Innovation in aeronautics
Infectious disease in aquaculture
Modelling and simulation of integrated systems in engineering
Spacecraft thermal control
Handbook of natural fibres
Printed films
Modern gas turbine systems
Handbook of natural fibres
Emerging food packaging technologies
Defect structure in nanomaterials
10th International Conference on Turbochargers and Turbocharging
Wear of orthopaedic implants and artificial joints
Handbook of herbs and spices
Leveraging information technology for optimal aircraft maintenance, repair and overhaul
(MRO)
Modern earth buildings
Phase transformations in steel
Phase transformations in steel

Handbook of herbs and spices
Animal feed contamination
Advances in science and technology of Mn+1AXn phases
Advances in meat, poultry and seafood packaging
Diet, immunity and inflammation
Minimized cardiopulmonary bypass techniques and technologies
Natural food additives, ingredients and flavourings
Industrial cutting of textile materials
Advances in wrought magnesium alloys
Breadmaking
Combined cycle systems for near-zero emission power generation
Nanotechnology in the food, beverage and nutraceutical industries
False twist textured yarns
Progenitor and stem cell technologies and therapies
Colour design
Biomaterials for spinal surgery
Laser surface modification of alloys for erosion and corrosion resistance
Mechanics of textile machinery
Dynamics of tethered satellite systems
Advanced materials in automotive engineering
Rubber-pad forming processes
Polymer electrolyte membrane and direct methanol fuel cell technology
Introduction to the physics of nanoelectronics
Advances in biodiesel production
Materials and Surface Engineering
Coatings for biomedical applications
Polymer electrolyte membrane and direct methanol fuel cell technology
Failure mechanisms in polymer matrix composites
Nuclear corrosion science and engineering
Nuclear decommissioning
Corrosion protection and control using nanomaterials
High temperature superconductors (HTS) for energy applications
Statistics for textile and apparel management
Infrastructure and methodologies for the justification of nuclear power programmes
Strategic management in garment industry
Metal working fluids (MWF) for cutting and grinding
Understanding the rheology of concrete
Mechatronics and manufacturing engineering
Alcoholic beverages
Gaseous hydrogen embrittlement of materials in energy technologies
Introduction to aerospace materials
Welding and joining of aerospace materials
New product development in textiles
Gaseous hydrogen embrittlement of materials in energy technologies
Internal Combustion Engines
Extrusion problems solved
Advanced engineering design
Welding processes handbook
Machining technology for composite materials
Fundamentals and advances in knitting technology
Training and development of technical staff in the textile industry
Industrial engineering in apparel production
Hygienic design of food factories
Handbook of textile and industrial dyeing
Handbook of textile and industrial dyeing
A quick guide to API 653 certified storage tank inspector syllabus
Innovations in Fuel Economy and Sustainable Road Transport
Modern machining technology
Composite joints and connections
Tribocorrosion of passive metals and coatings
In situ characterization of thin film growth
Orbital mechanics and formation flying
Aerodynamic measurements
Manley’s technology of biscuits, crackers and cookies
Power plant life management and performance improvement
Composite reinforcements for optimum performance
Advances in clean hydrocarbon fuel processing
Stress corrosion cracking
Postharvest biology and technology of tropical and subtropical fruits
Electrical motor products
Polymer modified bitumen
Nanocoatings and ultra-thin films
Specialist yarn and fabric structures
Handbook of food proteins
7th International Conference on Compressors and their Systems 2011
Electromigration in thin films and electronic devices
Advanced membrane science and technology for sustainable energy and environmental
applications
Improving the safety and quality of eggs and egg products
Improving the safety and quality of eggs and egg products
Handbook of medical textiles
Healthy agriculture, healthy nutrition, healthy people
Public health nutrition in developing countries
Bioactive glasses
Tailor welded blanks for advanced manufacturing
Textiles for hygiene and infection control
Biaxial stretching of film
Thin film growth
Computer technology for textiles and apparel
Lifetime nutritional influences on cognition, behaviour and psychiatric illness
Polymer matrix composites and technology
Processed meats
Collaborative product assembly design and assembly planning
Postharvest biology and technology of tropical and subtropical fruits
Postharvest biology and technology of tropical and subtropical fruits
Superplastic forming of advanced metallic materials
Handbook of sustainable textile production
Postharvest biology and technology of tropical and subtropical fruits
Rice quality
Advanced wound repair therapies
Electrospinning for tissue regeneration
Functional textiles for improved performance, protection and health
Superplasticity and grain boundaries in ultrafine-grained materials
Statistical data analysis
Diesel engine system design
Minimization of welding distortion and buckling
Advanced adhesives in electronics
Bioactive materials in medicine
Building decorative materials
Building materials in civil engineering
Multifunctional and nanoreinforced polymers for food packaging
Vehicle Thermal Management Systems Conference and Exhibition (VTMS10)
Shape memory and superelastic alloys
Functional foods
Small and micro combined heat and power (CHP) systems
Pressure vessels
Non-crimp fabric composites
Reducing saturated fats in foods
Fracture and fatigue of welded joints and structures
Fibrous and composite materials for civil engineering applications
Textile design
Recent trends in soft beverages
A practical guide to quality management in spinning
Food and beverage stability and shelf life
High-temperature superconductors
Preprosthetic and maxillofacial surgery
Polymer-carbon nanotube composites
Corrosion of magnesium alloys
Nanostructured metals and alloys
Food chain integrity
Advanced separation techniques for nuclear fuel reprocessing and radioactive waste
treatment
Interface engineering of natural fibre composites for maximum performance
Silicon-germanium (SiGe) nanostructures
Biomedical hydrogels
Practical scientific computing
Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture
Advances in knitting technology
Developing children’s food products
Milk and milk products in human nutrition
Determining mycotoxins and mycotoxigenic fungi in food and feed
Tribology for engineers
Handbook of advanced radioactive waste conditioning technologies
Injectable biomaterials
Improving comfort in clothing
Thermal barrier coatings
Electroless copper and nickel-phosphorus plating
Group theory for chemists
Service life estimation and extension of civil engineering structures
Wind energy systems
Biomaterials for artificial organs
Using robots in hazardous environments
The international cocoa trade
Protective cultures, antimicrobial metabolites and bacteriophages for food and beverage
biopreservation
Soft computing in textile engineering
Creep and fatigue in polymer matrix composites
Surface modification of biomaterials
Handbook of biofuels production
Fundamentals of aluminium metallurgy
Tracing pathogens in the food chain
Managing wastes from aluminium smelter plants
Physical properties and applications of polymer nanocomposites
Biomaterials and devices for the circulatory system
Optical switches
Welding and joining of magnesium alloys
Case studies in novel food processing technologies
Separation, extraction and concentration processes in the food, beverage and
nutraceutical industries
Understanding and mitigating ageing in nuclear power plants
A quick guide to API 510 certified pressure vessel inspector syllabus
Fundamentals of university mathematics
Environmental assessment and management in the food industry
Managing wine quality
Tribology and dynamics of engine and powertrain
Advances in yarn spinning technology
Advanced piezoelectric materials
Textiles, polymers and composites for buildings
Oxidation in foods and beverages and antioxidant applications
Sintering of advanced materials
Management of technology systems in garment industry
Oxidation in foods and beverages and antioxidant applications
The independent airport planning manual
Advances in textile biotechnology
High temperature deformation and fracture of materials
Colour measurement
Polymer electrolytes
Consumer-driven innovation in food and personal care products
Freeze-drying of pharmaceutical and food products
Geological repository systems for safe disposal of spent nuclear fuels and radioactive
waste
Stand-alone and hybrid wind energy systems
Fatigue life prediction of composites and composite structures
Advances in laser materials processing technology
Non-destructive evaluation of reinforced concrete structures
Winemaking problems solved
Failure mechanisms of advanced welding processes
Medical and healthcare textiles
Developments and innovation in carbon dioxide (CO2) capture and storage technology
Biointegration of medical implant materials
Technical textile yarns
Developments and innovation in carbon dioxide (CO2) capture and storage technology
Applications of nonwovens in technical textiles
Non-destructive evaluation of reinforced concrete structures
Lipid analysis
Bioalcohol production
Advanced power plant materials, design and technology
High-energy ball milling
Sensory analysis for food and beverage quality control
Surface engineering of light alloys
Cereal grains
Modern approach to maintenance in spinning
Performance of home textiles
Effective implementation of quality management systems
Personalized nutrition
Managing wine quality
Chemical deterioration and physical instability of food and beverages
Materials for energy efficiency and thermal comfort in buildings
Improving the safety and quality of milk
The risk management of safety and dependability
Improving the safety and quality of milk
Metals for biomedical devices
Advances in structural adhesive bonding
Blast protection of civil infrastructures and vehicles using composites
Vehicle noise and vibration refinement
Fire toxicity
Woven textile structure
Materials, design and manufacturing for lightweight vehicles
Handbook of worsted wool and blended suiting process
Biodiesel science and technology
Forensic polymer engineering
Importance of growth for health and development
Drivers of innovation in pediatric nutrition
Science in clothing comfort
Smart textile coatings and laminates
Delivering performance in food supply chains
Regenerative medicine and biomaterials for the repair of connective tissues
Frontiers in eating and weight regulation
Friction stir welding
Biomaterials and regenerative medicine in ophthalmology
Management, recycling and reuse of waste composites
Advanced direct injection combustion engine technologies and development
Innovations in food labelling
Drug-device combination products
Omega-3 fatty acids, the brain and retina
Modelling and predicting textile behaviour
Fundamentals and practices in colouration of textiles
Brittle matrix composites 9
Biomedical composites
Handbook of waste management and co-product recovery in food processing
Maraging steels
Failure, distress and repair of concrete structures
Dairy-derived ingredients
Advanced direct injection combustion engine technologies and development
Laser cooling of solids
Handbook of textile fibre structure
A quick guide to welding and weld inspection
Handbook of textile fibre structure
Sustainable textiles
Handbook of tensile properties of textile and technical fibres
Air
Watchers of the stars
Watchers of the stars
Textiles for cold weather apparel
Failure analysis and fractography of polymer composites
Wheel/rail interface handbook
Interior textiles
European nutrition and health report 2009
Biofilms in the food and beverage industries
Architectural glass to resist seismic and extreme climatic events
Quality characterisation of apparel
Humidification and ventilation management in textile industry
Soft drink and fruit juice problems solved
Surface modification of textiles
Bone repair biomaterials
More baking problems solved
Microbial host-interaction
Structural health monitoring of civil infrastructure systems
Fatigue in railway infrastructure
A balanced omega-6/omega-3 fatty acid ratio, cholesterol and coronary heart disease
Designing functional foods

Solid oxide fuel cell technology
New technologies in aquaculture
Development of packaging and products for use in microwave ovens
Science and engineering of short fibre reinforced polymer composites
Foodborne pathogens
Wennström's Four factors of success
Hybrid laser-arc welding
Science and technology of enrobed and filled chocolate, confectionery and bakery
products
Food processing technology
Geopolymers
Fatal accidents
Trans fatty acids in human nutrition
Engineering apparel fabrics and garments
Structural dynamics of earthquake engineering
Advances in polymer processing
Handbook of hydrocolloids
Advances in marine antifouling coatings and technologies
A quick guide to API 570 certified pipework inspector syllabus
Advanced textiles for wound care
Mathematical analysis and proof
Food constituents and oral health
Sustainability of construction materials
Biomaterials and tissue engineering in urology
Titanium alloys
Materials science for dentistry
Functional assessment of wetlands
Food factors for health promotion
Fatigue failure of textile fibres
Delta functions
Endocrine-disrupting chemicals in food
Functional foods
Meals in science and practice
Advances in carpet manufacture
Multiaxial notch fatigue
Emerging societies - coexistence of childhood malnutrition and obesity
High speed spinning of polyester and its blends with viscose
Fundamentals of designing for textiles and other end uses
Smart clothes and wearable technology
Identification of textile fibers
Functional and speciality beverage technology
Shellfish safety and quality
Polyolefin fibres
Biomaterials for treating skin loss
Improving the sensory and nutritional quality of fresh meat
Corrosion control in the aerospace industry
Cellular response to biomaterials
Advances in wool technology
Food for the ageing population
Weld cracking in ferrous alloys
Engineering textiles
Shape memory alloys for biomedical applications
Materials for fuel cells
Delamination behaviour of composites
Condition assessment of aged structures
Textile advances in the automotive industry
Orthopaedic bone cements
Tribology of natural fiber polymer composites
Physical properties of textile fibres
Structure and mechanics of textile fibre assemblies
Biologically inspired textiles
Solid-state hydrogen storage
Degradation rate of bioresorbable materials
Chilled foods
The air transport system
Carbohydrate-active enzymes
Advances in fire retardant materials
Fabric testing
3-D fibrous assemblies

Ageing of composites
Improving farmed fish quality and safety
Natural-based polymers for biomedical applications
Nutrition and fitness
Personalized nutrition for the diverse needs of infants and children
Application of fats in confectionery
Hydrometallurgy
Environmentally compatible food packaging
Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer
(FRP) composites
High-performance organic coatings
Joint replacement technology
Handbook of water and energy management in food processing
Properties and performance of natural-fibre composites
Polyesters and polyamides
In-pack processed foods
Developments in the formulation and reinforcement of concrete
Friction in textile materials
Phospholipid technology and applications
Mineral wool
Novel approaches to improving high temperature corrosion resistance
Wood-polymer composites
Advances in apparel production
Military textiles
A quick guide to health and safety
Improving seafood products for the consumer
Industrial manufacture of snack foods
Hydroforming for advanced manufacturing
Generating power at high efficiency
Improving the health-promoting properties of fruit and vegetable products
Real-time weld process monitoring
Developments in high temperature corrosion and protection of materials
Design, fabrication and economy of welded structures
Design and optimization of metal structures
Degradation and stabilisation of polyamides
Food fortification and supplementation
Microjoining and nanojoining
A quick guide to pipeline engineering
Dental biomaterials
Bioceramics and their clinical applications
Corrosion under insulation (CUI) guidelines
Handbook of advanced dielectric, piezoelectric and ferroelectric materials
Creep-resistant steels
The mould design guide
Essentials of scientific computing
Fruit and vegetable flavour
State estimation in chemometrics
The window of opportunity
Techniques for corrosion monitoring
Belt conveying of minerals
The SGTE casebook
Delivery and controlled release of bioactives in foods and nutraceuticals
Fundamental engineering mathematics
Steel manual
Concise thermodynamics
Making chocolates in the factory
Stochastic differential equations and applications
Case studies in food product development
Plastics, rubber and health
Technology of functional cereal products
Nucleating agents
Industrial gas turbines
Tissue engineering using ceramics and polymers
Food preservation by pulsed electric fields
Nanofibers and nanotechnology in textiles
Thermoset nanocomposites for engineering applications
Coatings and inks for food contact materials
Novel enzyme technology for food applications
The cold spray materials deposition process
Materials in sports equipment
Understanding and controlling the microstructure of complex foods
The air engine
Innovative pre-treatment techniques to prevent corrosion of metallic surfaces
Biomedical polymers
HCCI and CAI engines for the automotive industry
Epoxy composites
Mathematical modelling
Handbook of organic food safety and quality
Computational welding mechanics
Durability of composites for civil structural applications
Corrosion in refineries
Standardisation of thermal cycling exposure testing
Complex numbers
Durability of concrete and cement composites
Nutrigenomics - opportunities in Asia

Consumer-led food product development
Issues in complementary feeding
Cheese problems solved
Corrosion issues in light water reactors
Exploding a myth
Corrosion by carbon and nitrogen
Modifying flavour in food
Computational functional analysis
Antioxidants in food and biology
Long-chain omega-3 specialty oils
Practical guide to polyimides
Nutrition support for infants and children at risk
Prevention of coronary heart disease
Functional dairy products
Artificial cells, cell engineering and therapy
Multiscale materials modelling
Corrosion behaviour and protection of copper and aluminium alloys in seawater
Environmental aspects of textile dyeing
Novel food ingredients for weight control
Improving the flavour of cheese
Machine learning and data mining
Electrochemistry in light water reactors
Shape memory polymers and textiles
Amine unit corrosion in refineries
Sizing in clothing
Enzymes
Handbook of waste management and co-product recovery in food processing
Tamime and Robinson's Yoghurt
Corrosion of metallic heritage artefacts
Modelling microorganisms in food
Determination of additives in polymers and rubbers
Local probe techniques for corrosion research
Plasma technologies for textiles
Smart textiles for medicine and healthcare
Handbook of gold exploration and evaluation
Analysis and design of plated structures
Reducing salt in foods
Ecotextiles
Composites forming technologies
TPE 2006
Polymers in electronics 2007
More on mediterranean diets
Introduction to plastic recycling
Understanding consumers of food products
Chemical migration and food contact materials
Cotton
Handbook of nonwovens
Geosynthetics in civil engineering
The use of electrochemical scanning tunnel microscopy (EC-STM) in corrosion analysis
The electrochemistry and characteristics of embeddable reference electrodes for
concrete structural engineering
Microbiological analysis of red meat, poultry and eggs
Corrosion of reinforcement in concrete
Maximising the value of marine by-products
Managing allergens in food
Elastomers and components
Thermal and moisture transport in fibrous materials
Fatigue assessment of welded joints by local approaches
Acrylamide and other hazardous compounds in heat-treated foods
Hybrid yarns and textile preforming for thermoplastic composites
Food consumption and disease risk
Advanced welding processes
Meat products handbook
Modifying lipids for use in food
Medical modelling

Fatigue analysis of welded components
Lawrie’s meat science
Cumulative damage of welded joints
Handbook of herbs and spices
Innovation and technology of women's intimate apparel
Brewing
Polymers in electronics
Intelligent textiles and clothing
Optimising sweet taste in foods
Adhesion to fluoropolymers
Aircraft system safety
Lightweight ballistic composites
Assessing food safety of polymer packaging
Biodegradable polymers
IPDS 2006 Integrated powertrain and driveline systems 2006
Benders’ dictionary of nutrition and food technology
Local mediterranean food plants and nutraceuticals
Protein and energy requirements in infancy and childhood
Nutritional management of diabetes mellitus and dysmetabolic syndrome
Medical polymers 2006
Silicone elastomers 2006
Lipids
Primary prevention by nutrition intervention in infancy and childhood
8th International Conference on Turbochargers and Turbocharging
Emerging foodborne pathogens
Surface coatings for protection against wear
MIG welding guide
Analysis and design of plated structures
Materials for engineering
Digital printing of textiles
Biomechanical engineering of textiles and clothing
Advanced civil infrastructure materials
Clothing biosensory engineering
Base Metals Handbook
Joining plastics 2006
Polymer reference book
Direct strip casting of metals and alloys
The Chorleywood Bread Process
Food spoilage microorganisms
Recycling in textiles
Flavour in food
Improving traceability in food processing and distribution
Digital signal processing

Nanostructure control of materials
Polymer nanocomposites
Rubber bonding 2006
Flammability testing of materials used in construction, transport and mining
Total colour management in textiles
Solving tribology problems in rotating machines
Improving the fat content of foods
Formulation and production of chewing and bubble gum
Ceramic-matrix composites
Detecting allergens in food
Laser shock peening
Practical guide to blow moulding
Structural shear joints
Polymers in cementitious materials
Biodegradable and sustainable fibres
Medical textiles and biomaterials for healthcare
Digital image processing
The Hatfield memorial lectures
Effect of mechanical and physical properties on fabric hand
Handbook of hygiene control in the food industry
Materials for energy conversion devices
Textiles for protection
Cotton Trading Manual
Food diet and obesity
Processes and mechanisms of welding residual stress and distortion
Fundamentals of metallurgy
Nanolithography and patterning techniques in microelectronics
New developments in advanced welding
Chemical testing of textiles
Biomaterials, artificial organs and tissue engineering
Inspection and monitoring techniques for bridges and civil structures
Analytical electrochemistry in textiles
Multi-scale modelling of composite material systems
Textiles in sport
The science and technology of materials in automotive engines
Improving the safety of fresh fruit and vegetables
Food safety control in the poultry industry
Innovation in linen manufacture
Improving the safety of fresh meat
Design and manufacture of textile composites
Understanding pathogen behaviour
The microwave processing of foods
Engineering catastrophes
Molecular interfacial phenomena of polymers and biopolymers
Biocides in plastics
Lipid oxidation
Diet diversification and health promotion

Polymers in construction
The impact of maternal nutrition on the offspring
Home care enteral feeding
Feeding during late infancy and early childhood: Impact on health
Nutrition and fitness
Nutrition and fitness

European nutrition and health report 2004
Sterilisation of polymer healthcare products
Surfaces and interfaces for biomaterials
New millennium fibers
The deformation and processing of structural materials
Sterilisation of tissues using ionising radiations
Biodegradable polymers for industrial applications
High performance and speciality elastomers 2005
Wearable electronics and photonics
Bast and other plant fibres
Probability and random variables
Adhesive bonding
Welding symbols on drawings
Bonding elastomers
Corrosion in reinforced concrete structures
Using cereal science and technology for the benefit of consumers

Theories of generalised functions
Handbook of biodegradable polymers
Control and optimal control theories with applications
Synthetic fibres
Structure and mechanics of woven fabrics
Secrets of the tide

Polymers in aggressive and corrosive environments 2004 (PACE 2004)
Brewing
Clothing appearance and fit
Green composites
Functional foods, cardiovascular disease and diabetes
Pesticide, veterinary and other residues in food
Chemical finishing of textiles
Starch in food
Mycotoxins in food
Improving the thermal processing of foods
The alloy tree
The world sugar market
Functional foods, ageing and degenerative disease
Bioactive lipids
Micronutrient deficiencies during the weaning period and the first years of life
Synthetic fibre dyeing
Allergic diseases and the environment
Metabolic issues of clinical nutrition
Engineering and structural adhesives
Clay-containing polymeric nanocomposites
Polymer bonding 2004
Poultry meat processing and quality
Composite technologies for 2020

Nutrigenetics and nutrigenomics
Understanding and measuring the shelf-life of food
Infinitesimal methods of mathematical analysis
High nitrogen steels and stainless steels
Staphylococcus aureus
Advanced polymer composites for structural applications in construction
Proteins in food processing
Handbook of fibre rope technology
Detecting foreign bodies in food
Texture in food
Handbook of herbs and spices
Plastic flame retardants
Analytical methods for food additives
Woollen and worsted woven fabric design
Engineering materials science
Underwater wet welding
Geometric computations with interval and new robust methods
Fatigue in composites
Energy absorption of structures and materials
Food preservation techniques
Food authenticity and traceability
Brittle matrix composites 7
Buyer's guide to sourcing castings from India
Environmentally-friendly food processing
Textile processing with enzymes
Sausage manufacture
Bread making
Durability of engineering structures
Rapid and on-line instrumentation for food quality assurance
Sustainable transport
Arc welding control
Dairy processing
The international seafood trade
Hygiene in food processing
The automotive industry and the environment
Materials in sports equipment
Handbook of yarn production
Welding processes handbook
Texture in food
Textile finishing
Wind over waves
Measure theory and integration
Natural antimicrobials for the minimal processing of foods
Detecting pathogens in food
Novel food packaging techniques
Environmental impact of textiles
Plants in human health and nutrition policy
Mathematical modelling
Nutrition and critical care
Confectionery fats handbook
Lipids for functional foods and nutraceuticals
Micronutrient deficiencies in the first months of life
Omega-6/omega-3 essential fatty acid ratio
Advances in lipid methodology
Phytochemical functional foods
Yeasts in food
Mathematical modelling in education and culture
The China and Hong Kong denim industry
The World Trade Organization and international denim trading
Taints and off-flavours in foods
Mathematical methods for mathematicians, physical scientists and engineers
Functional dairy products
Local environmental sustainability
Performance functional foods
The international meat trade
Water recycling in textile wet processing
Textile printing
Flame retardants for plastic
Welding residual stresses and distortion
Networks and graphs
Applied elasticity
Practical sonochemistry
Japanese financial markets
Microscopy techniques for materials science
Corrosion of austenitic stainless steel
Fancy yarns
Hyaluronan

Prion diseases and copper metabolism
Concise chemistry of the elements
Microbiological risk assessment in food processing
The welding of aluminium and its alloys
Designing a structured cabling system to ISO 11801
Planning for cycling
Meat processing
Introduction to structures
Fractal geometry
Colour in food
The nutrition handbook for food processors
Fruit and vegetable processing
Minimal processing technologies in the food industries
Safety and quality issues in fish processing
The international copper industry
Lockhart and Wiseman’s crop husbandry including grassland
Carpet manufacture
Dictionary of textile finishing
Clinical nutrition
Wool
Coated and laminated textiles
Ready meals technology
Recommended values of thermophysical properties for selected commercial alloys
Meat refrigeration
Mathematics
Topology in chemistry
Health and safety in welding and allied processes
Copper
Lead and zinc
Nickel
Aluminium
Mathematics teaching practice
Elastic beams and frames
Fruit and vegetable biotechnology
Manifold theory
Building the ecological city
Food chemical safety
Air pollution meteorology
Structural design of woven fabrics
Secondary metallurgy
Application of textiles in rubber
Colorants and auxiliaries
Practical guide to the assessment of the useful life of plastics
Colorants and auxiliaries
Yarn hairiness: A further update
Apparel sizing and fit
Quality management in the clothing and textile industry
Textile terms and definitions
The textile/clothing pipeline and quick response management
Total quality assurance for the food industries
The international potato industry
Statistical mechanics
Modelling and mathematics education
Cellulosic pulps, fibres and materials
Silk, mohair, cashmere and other luxury fibres
Recent advances in environmentally compatible polymers
High performance fibres
Yarn texturing technology
Smart fibres, fabrics and clothing
Instrumentation and sensors for the food industry
Handbook of textile design
Food product development
Microencapsulation of food ingredients
Handbook of herbs and spices
Mechanical evaluation strategies for plastics
Advances in food refrigeration
The international timber trade
Gas Trading Manual
Current practice in environmental reporting
Auditing in the food industry
Cross-border exposures and country risk
Transfer pricing for financial institutions
Structured trade and commodity finance
Extrusion cooking
The international scrap and recycling industry handbook
EU food law
Food process modelling
Surface topology
Encyclopedia of textile finishing
Functions of vitamins beyond recommended dietary allowances
The international spirits industry
Making the most of HACCP
Welding and cutting
Food chemical safety
Regenerated cellulose fibres
E-commerce law and practice in Europe
Knitting technology
Frying
Thermal technologies in food processing
Baking problems solved
Instrumental methods in electrochemistry
The fertilizer industry
Balance sheet structures
Cereals processing technology
Antioxidants in food
Medical textiles

The aluminium industry
Fire retardant materials
Biscuit, cracker and cookie recipes for the food industry
Welding processes and thermal cutting
Basic principles of textile coloration
Hot runners in injection moulds
Geometry with trigonometry
Handbook of composite fabrication
Sewing threads
Aluminium welding
Game theory
Textiles in automotive engineering
Welded design
Handbook of technical textiles
Finite element modelling of composite materials and structures
Mechanical testing of advanced fibre composites
Geometric symmetry in patterns and tilings
Impact behaviour of fibre-reinforced composite materials and structures
Dietary anticarcinogens and antimutagens
The international wine trade
Cable engineering for local area networks
HACCP in the meat industry
The zinc industry
FRC 2000 – Composites for the millennium

Plasticity for engineers
The stability and shelf-life of food
Food intolerance and the food industry
The coal industry
Cereal biotechnology
Food labelling
Pultrusion for engineers
Managing frozen foods
Integrated design and manufacture using fibre-reinforced polymeric composites
Valuing oil and gas companies

Valuing pharmaceutical companies

The tea industry
Current practice in environmental reporting
Lipid glossary 2
Sugar Trading Manual
Fatigue design procedure for welded hollow section joints
The platinum group metals industry
Underwater repair technology
Gums and stabilisers for the food industry 10
Managing currency risk using foreign exchange options
Reaction mechanisms of metal complexes
The welding workplace
Power generation
Welding of plastics
The automotive industry
Surfacing
Fatigue
Fracture
Laser welding
Non-destructive testing of welds
Polystyrene
Plastic products recycling
Surface defects on electrolytically coated steel sheet
Humic substances
Digital signatures
Reactive dyes for textile fibres
Experimental inorganic/physical chemistry
Handbook of mould, tool and die repair welding
Mechanics of solids
Object-oriented technology and computing systems re-engineering
Ions in solution
Joints in aluminium – INALCO ’98
Welded joint design
Thermal welding of polymers
New ingredients in food processing
Predictive formulae for weld distortion
Environmental risk management and corporate lending
Paint and surface coatings
Project management: getting it right
Maximising performance in insurance operations
3-D textile reinforcements in composite materials
Analysis of engineering structures
Composite materials
Potato production, processing and technology
Valuing mining companies

Directors’ and Officers’ liability insurance
Crystal structures
Ordinary differential equations and applications

Lipids in nutrition and health
Fundamental chemical kinetics
Metallurgy of welding
Driving strategic change in financial services
Achieving transformation and renewal in financial services
Developing people and the corporate culture in financial services
Non-destructive examination of underwater welded structures
Mineral fortification of food
Advances in magnetic resonance in food science
Electronic banking and treasury security
NDE in relation to structural integrity for nuclear and pressurised components
Strengthening of reinforced concrete structures

Local strain and temperature measurement
Offshore financial services handbook
Agri-food quality II
Physical testing of textiles
ACT companion to treasury management
Lipids in health and nutrition
Natural antioxidants and anticarcinogens in nutrition, health and disease
Exploiting advances in arc welding technology
Industrial applications of surfactants IV
Understanding humic substances
Progression air-jet spinning
Managing risks of nitrates to humans and the environment
Air-jet weft insertion
Iron and steel dictionary
Fundamental and applied aspects of chemically modified surfaces
Yarn production
Melting and mixing of alloying agents in steel melts
Foundry dictionary
Disinfection by-products in drinking water
Automotive textiles
Pesticide chemistry and bioscience
Ecotextile ’98
Metals trading handbook
Reinforced plastics durability
The international banana trade
Macro-engineering and the earth
Money and the global economy
Developments in marine corrosion
Digital filters and signal processing in electronic engineering
Computer technology in welding
Trading in oil futures and options
Symmetry and group theory in chemistry
Pattern recognition and image processing
Advanced applied finite element methods
Forecasting company profits
Engineering coatings
Underwater wet welding and cutting
Atlas of fibre fracture and damage to textiles
Microstructural characterisation of fibre-reinforced composites
Competitor analysis in financial services
Gums and stabilisers for the food industry 9
Foreign exchange options
Practical dehydration
The Maillard reaction in foods and medicine
Thermoset resins for composites
The international paper trade
Biscuit, cookie and cracker manufacturing manuals
Biscuit, cookie and cracker manufacturing manuals
Biscuit, cookie and cracker manufacturing manuals
Biscuit, cookie and cracker manufacturing manuals
Biscuit, cookie and cracker manufacturing manuals
Biscuit, cookie and cracker manufacturing manuals
Financial markets of Eastern Europe and the Former Soviet Union
The technology of short-staple spinning
Maillard reactions in chemistry, food and health
Monitoring and testing of manufactured fibres
Experimental design techniques in statistical practice
Swiss wine market report
Stitches and seams
Computer integrated manufacturing and total quality management
Pilling
Missile guidance and pursuit
Blends dyeing
Chemistry, energy and the environment
Surface defects on hot-dip metal coated steel sheet
Quality assurance in adhesive technology
Humic substances
Fire retardancy of polymers
High pressure food science, bioscience and chemistry
Biosensors for food analysis
The design logic of textile products
Circuit analysis
Offshore lending and financing

Private banking
Law relating to international banking
Flow-induced alignment in composite materials
Duplex stainless steels
Intellectual property rights
Fundamentals of inorganic chemistry
Corporate cash management
Managing liquidity
Introduction to futures and options
Handbook of structural welding

Metallurgy of basic weld metal
Handbook of indices of food quality and authenticity
Fatigue of thin walled joints under complex loading
Managing banking risks
Advances in lipid methodology
Macro-engineering
Dynamics of mechanical systems
Linear differential and difference equations
Fundamentals of food processing and technology
Signal processing in electronic communications
Antioxidants in science, technology, medicine and nutrition
Colour physics for industry
Progress in ion exchange
Organic chemistry
Food colloids
New fibers
Humic substances, peats and sludges
Liquid moulding technologies

Flavours and fragrances
Managing banking relationships
Flavour science
Carcinogenicity of inorganic substances
Introduction to the non-destructive testing of welded joints
Mossbauer spectroscopy
Surface defects in hot rolled flat steel products
Fatigue design of welded joints and components
Heat treatment of welded steel structures
Short fibre-polymer composites
Psychology of relationship banking
Commercial contracts
A complete course in canning and related processes
A complete course in canning and related processes
Food science reviews
Advances in lipid methodology
A complete course in canning and related processes
A complete course in canning and related processes
Welding mechanisation and automation in shipbuilding worldwide
ECCM 7
Insolvency
Crack arrest concepts for failure prevention and life extension
How charts can make you money
Investment performance measurement
Surface engineering casebook
Recycling textile and plastic waste
The chemistry and processing of wood and plant fibrous material
The international sugar trade
Decision and discrete mathematics
Food irradiation
Finite element techniques in structural mechanics
Separation processes in the food and biotechnology industries
Optimisation of composite structures design
Natural antioxidants and food quality in atherosclerosis and cancer prevention
Wheat structure
Finite element programs in structural engineering and continuum mechanics
The ‘local approach’ to cleavage fracture
Financial management information and analysis for retail banks
Property futures and securitisation - the way ahead
Cellulose and cellulose derivatives

The international wool trade
Encyclopedia of textile finishing
Cocoa cycles
The international tin trade
Unit operations for the food industries
The international grain trade
Colour in dyehouse effluent
Stress determination for fatigue analysis of welded components
Glossary for the food industries
The banking systems of the EU member states
Ultra high temperature mechanical testing
French financial markets
The international steel trade
Weaving
Slag atlas
Calculus
Barrier fabrics for protection against aerosols
Landfill waste pollution and control
Media equities
Pesticides
Cellulosics dyeing
Rise and demise of commodity agreements

Thermal bonding of nonwoven fabrics
Oil Trading Manual
A mathematical kaleidoscope
The international lead trade
Chemistry in your environment
Banking and finance
Biochemistry of milk products
Tubular wire welding
Weldability of ferritic steels
Human resource development
The international cotton trade
Plastics in the automotive industry
Construction equities
The living rock
Carbon dioxide chemistry
Waste minimisation
Food dehydration
Man-made fibres and their processing
Detection methods for cynobacterial toxins
Handbook of polymer composites for engineers
Kent’s technology of cereals
Design and manufacture of composite structures
Microbiologically influenced corrosion handbook
Practical astronomy
The ACT guide to ethical conflicts in finance
Electron beam welding
Woollen yarn manufacture
Advanced fiber spinning technology
Colour for textiles
Nickel and chromium plating
Mining in the Americas
Welding steels without hydrogen cracking
Food colloids and polymers
The international rice trade
The international gold trade
Steel – a handbook for materials research and engineering
Food and cancer prevention
Principles and practices for the safe processing of foods
Toughness requirements for steels
Instrumental colour formulation
New spinning systems
Encapsulation and controlled release
Laser welding
Handbook of crack opening data

Self-shielded arc welding
The international silver trade
Total quality management for the food industries
Wool dyeing
Shallow crack fracture mechanics toughness tests and applications
Risk management of chemicals
The international nickel trade
Thermoplastic aromatic polymer composites
Steel – a handbook for materials research and engineering
Tomato production, processing and technology
Food machinery
Agricultural futures and options
A practical guide to TIG (GTA) welding
Total quality management for engineers
Creative techniques in product and engineering design
Food contaminants
Fundamentals of welding metallurgy
Research and development guidelines for the food industries
Process pipe and tube welding

The fatigue strength of transverse fillet welded joints
Toxic substances in crop plants
Education and training in food science
The chemistry of wood preservation
Food policy trends in Europe
Advances in soil organic matter research
Nitrates and nitrites in food and water
Feta and related cheeses
Determination of veterinary residues in food
Food polymers, gels and colloids
Fatigue strength of welded structures
Dietary fibre
Professional diver’s manual on wet-welding
TIG and plasma welding
Pulsed arc welding
Which process?
Design and analysis of fatigue resistant welded structures
A guide to designing welds
Vitamins and minerals in health and nutrition
Submerged-arc welding
Physical properties of foods and food processing systems
Giles's laboratory course in dyeing
The theory of coloration of textiles
NDE handbook
Food emulsions and foams
Plant polymeric carbohydrates
Food structure
Handbook of textile fibres
Handbook of textile fibres
Engineering in textile coloration
Faults in hot dip galvanising
Weaving
Polymer melt rheology
Watson’s advanced textile design
Watson’s textile design and colour
Wire rod defects
Subtitle                                                                 Volume     Edition


Research and development

Research and development
Industrial applications and economics                                    Volume 2
Materials, technologies and optimisation

Towards zero carbon transportation
Biomass and waste supply chain exploitation
Science, production and applications
Processes, technologies and international experience
Developments and applications




Fundamental materials science, design and optimisation                   Volume 1

Theory and application of reliability analysis methods for major power
plant components


Operational challenges and high-temperature materials
Mechanisms, modelling and mitigation

Solid oxygen- and CO2-carriers




Current and future applications




Fundamentals, materials and processes
Principles and applications




Technological advances and future challenges




Understanding and improving the urban environment
Technologies and applications

Structure, processing and properties
Theory and applications

Case studies in designing devices
Applications and advances




Modelling and applications
Improving quality


Fundamentals and applications
Materials and design for sensors, actuators and medical applications

Current and future technologies
Materials, design and technologies




Science and technology




Types and applications

Science, implications and lessons for the nuclear industry

Moulding and processing techniques

Science, technology and applications

A practical guide for the use and management of modern hip resurfacings

Principles, technologies and applications

Novel methods and applications




Prevention and control
Issues of methodology, quality, testing and applications

Processing and applications                                                Volume 2
Materials science and applications in sensors, electronics and photonics
High efficiency, low emission, fuel flexible power generation
Types, properties and factors affecting breeding and cultivation           Volume 1
Principles and practice
                                                                         Volume 1 Second edition


Materials, engineering, constructions and applications
Fundamentals and diffusion controlled transformations                       Volume 1
Diffusionless transformations, high strength steels, modelling and advanced Volume 2
analytical techniques
                                                                            Volume 2 Second edition
Effects on livestock and food safety




Properties, processing and applications
Improving quality                                                                   Second edition


Principles, processing and applications

Theories and application




Technology and applications
Fundamentals and performance of low temperature fuel cells               Volume 1

Processes and technologies
Research and development

In situ characterisation techniques for low temperature fuel cells       Volume 2
Criteria, testing and industrial applications

Planning, execution and international experience




Fundamentals and recent advances

Research and development
Sensory evaluation and consumer research
Mechanisms, modelling and future developments                            Volume 2


Innovation and production
The problem, its characterisation and effects on particular alloy classes   Volume 1
Improving performance, fuel economy and emissions
Food, pet food and feed
An integrated approach
                                                                                       Second edition
Principles and practice




Principles, processes and types of dyes                                     Volume 1
Applications of dyes                                                        Volume 2
Example questions and worked answers

A practical guide
Principles, modelling and testing


A digital control perspective
From physical principles to turnkey instrumentation
                                                                                       Fourth edition


Science and technology
Theory and practice
Fundamental issues                                                          Volume 1
International energy-efficiency standards and testing methods
Properties and characterisation
Technologies and applications
Developments and applications


Materials and reliability


Egg chemistry, production and consumption                                   Volume 1
Egg safety and nutritional quality                                          Volume 2


(Two volume set)
Materials, properties and applications


Principles and applications
Physics, materials science and applications




Improving safety, nutrition and quality
Methodologies and applications
Mangosteen to white sapote                                                  Volume 4
Cocona to mango                                                             Volume 3
Methods and applications

Açai to citrus                                                               Volume 2
A guide to rice properties and analysis




A practical guide

Modelling and implementation
Materials, properties and applications
Design and applications




Applications and technologies
Concept to product                                                                      Second edition
Advanced design, performance, materials and applications
External pressure technology                                                            Second edition
Manufacturing, properties and applications




Principles, advances and applications




Biomaterials, bone grafting and tissue engineering
Preparation, properties and applications

Processing, microstructure, mechanical properties and applications
A holistic approach to food traceability, safety, quality and authenticity




Production, properties and applications in electronics
Biochemistry, manufacture and medical applications




A practical guide

Science and applications


Processing, characterisation and modelling
Fundamental theory and applications                                             Second edition

Optimising design and construction for safe and reliable operation

Landmine detection, de-mining and other applications
                                                                                Third edition




Methods analysis and applications
Processes and technologies
Production, processing and applications




Materials and design

Innovations in processing, packaging, and predictive modelling


Materials and operational aspects of plant life management (PLiM)
Example questions and worked answers
                                                                                Third edition
Life cycle assessment and related approaches
Oenology and wine quality                                            Volume 2
Fundamentals, applications and future trends

Science and technology

Understanding mechanisms of oxidation and antioxidant activity       Volume 1


Management in different industry sectors                             Volume 2




Principles, advances and industrial applications
Fundamentals and applications




Technology, energy storage and applications

Technology, research and application
Non-destructive testing methods                                      Volume 2




Carbon dioxide (CO2) storage and utilisation                         Volume 2
Science and design

Carbon dioxide (CO2) capture, transport and industrial applications      Volume 1

Deterioration processes and standard test methods                        Volume 1
Isolation, separation, identification and lipidomic analysis                        Fourth edition
Biochemical conversion of lignocellulosic biomass

Mechanochemical processing of nanopowders
A practical guide
Aluminium, magnesium and titanium alloys
Assessing and managing quality




Translating nutrigenetic/nutrigenomic research into dietary guidelines
Viticulture and wine quality                                             Volume 1


Improving quality in milk products                                       Volume 2

Milk production and processing                                           Volume 1




Theory and applications


From soil to oil
Why polymer products fail in service




From basics to applications


Diesel engines                                                           Volume 2

Delivery technologies and applications




                                                                         Volume 2
Modelling of microstructure, properties and applications
Food and nutraceutical uses
Gasoline and gas engines                                                Volume 1

Natural, regenerated, inorganic and specialist fibres                   Volume 2

Fundamentals and manufactured polymer fibres                            Volume 1
Life cycle and environmental impact

The excellent canopy
The story of a revolution                                                          Third edition
The story of a revolution                                                          Third edition




Design and developments




Tolerance versus allergy




Measuring and controlling food structure breakdown and nutrient
absorption
Principles, performance and operations
Improving production efficiency, quality and environmental management


Hazards, risk analysis and control                                                 Second edition
A simple tool to innovate healthy brands




Principles and practice                                                            Third edition
Structures, processing, properties and industrial applications
How prosperity and safety are linked
                                                                                   Second edition

Theory and application using Mathematica and Matlab
From macro- to nano- scales
                                                                                   Second edition

Example questions and worked answers

                                                                                   Second edition
Current status and future prospects


Modelling of microstructure, properties and applications
                                                                      Ninth edition
Towards evaluation of ecosystem services


Introduction to generalised functions                                 Second edition

Principles and technology
Interdisciplinary research and business applications




Industrial and medical applications




Integrating the design and manufacture of textile products




                                                                      Fourth edition


Materials and chemistry
Prediction and evaluation
A comprehensive guide                                                 Third edition

Structure, function and applications


Properties, applications and modelling of three-dimensional textile
structures
Cultural, genetic and metabolic aspects


Principles and applications




Improving quality




Production and properties




Combined cycle technology for sustainable energy production




International conference proceedings, 2008

Rapra Review Reports, Vol. 16, No. 9, Report 189
Technological, safety and regulatory aspects


Imaging, testing and modelling


Synthesis, properties and applications


Numerical methods for science and engineering
Recent advances and future prospects
The Kalman filter and beyond
Pre-pregnancy to 24 months of age


Thermodynamics at work                                            Second edition

A student friendly workbook
                                                                  Third edition
Principles and applications in physical science and engineering   Second edition
                                                                                     Second edition




Performance and operability

From research to application




Fundamentals and applications
                                                                          Volume 2

Stirling cycle power for a sustainable future




Impact resistance and flame retardancy
Education, engineering and economics - ICTMA 12




Lattice simulation and zeta function applications

1st ILSI International conference on nutrigenomics, Singapore, December
2005




Stress corrosion cracking
Conventional wisdom or scientific truth?
Metal dusting, carburisation and nitridation

                                                                                     Second edition
Facts and fiction




                                                                          Volume 2

Fundamentals and applications
Reference electrodes, measurement, corrosion and tribocorrosion issues




Biochemistry, biotechnology, clinical chemistry                                     Second edition
                                                                         Volume 1
Science and technology                                                              Third edition
Investigation, conservation and prediction of long term behaviour




Materials, systems and applications

Dynamics                                                                 Volume 2
Practical strategies
The way forward for sustainable development in textiles


Munich, Germany, 30-31 January 2007

                                                                                    2nd edition


Science and technology


Reference material and procedural guidelines




Monitoring, prevention and rehabilitation techniques


Service life prediction - progress and challenges

                                                                                    Second edition

Textile Progress Vol. 38 No. 4
Consumer-pathogen interactions

Practical science and technology

The application of advanced design and development techniques in
medicine
Designer's guide to the structural hot-spot stress approach
                                                                                    Seventh edition

                                                                         Volume 3 1st edition

New technologies
Military and civil aeronautical applications
Military and law-enforcement applications




                                                                              Eighth edition




Cologne, Germany, 6-7 June 2006
Frankfurt, Germany, 19-20 September 2006
Structure, physical properties and functionality




Stability                                                          Volume 1
                                                                              Third edition


Science, mechanics and applications


London, England, 25-26 April 2006




Mathematical and computational methods, software development and              Second edition
applications


Düsseldorf, Germany, 21-22 February 2006




Microstructure, properties and applications

Performance and process simulation

Analysis, properties and design for repeated loading
Mathematical and computational methods
                                                                          Volume 3




The art of predictive damage modelling




Textile Progress Vol. 37 No. 3


Virulence, stress response and resistance

Causes and effects of major accidents                                                Third edition


                                                                                     Second edition
European Academy of Nutritional Sciences (EANS) Conference, Vienna, May
2004




Obesity, the metabolic syndrome, cardiovascular disease, and cancer
Mental health, aging, and the implementation of a healthy diet and
physical activity lifestyle




20-21 April 2005, Geneva, Switzerland




Science, technology and applications
A review of adhesives and processes

Proceedings of the 12th International ICC Cereal and Bread Congress, 24-
26th May, 2004, Harrogate, UK
Distributions, ultradistributions and other generalised functions


Nylon, polyester, acrylic, polyolefin

Tide and tidal current analysis and predictions, storm surges and sea level
trends

Science and practice
Science and technology
Polymer composites and the environment




Structure, function and applications
Detection and control

A guide to low-alloy steels, stainless steels and nickel-base alloys




                                                                              Two volume set


Proceedings of the fourth Asian-Australasian conference on composite
materials (ACCM 4)




Manufacturing, properties and applications
Molecular and clinical aspects
ACIC 2004




Solid foods                                                                   Volume 2
                                                                              Volume 2
Technology and current developments


Properties, uses, degradation, remediation
A welder's mate
Applications in computer graphics, GIS and computational geometry
Science and technology of the fatigue response of fibre-reinforced plastics




Principles and practice
Improving quality
Design, repair and maintenance




Improving quality

Principles and practice

                                                                              Volume 1
Technology, science and economics

Semi-solid foods                                                              Volume 1

Forecasting and fundamentals of applications                                  Volume 2
                                                                                         Second edition




Production, processes and protection

A way of life - ICTMA 11




The scientific evidence
                                                                              Volume 5


ICTMA 10




                                                                              Volume 1




                                                                                         Second Edition
Calculation and measurement
Techniques and Computational Methods
Matrix and tensor analysis of elastic continua                                   Second edition
Power ultrasound uses and applications                                           Second edition
                                                                                 Second edition

Mechanism, mitigation and monitoring
Their manufacture and application
Proceedings of an international meeting, September 2000, North East
Wales Institute, UK
BSE, scrapie and CJD research




Cross-referenced to European CENELEC and American Standards                      Second edition
Principles, practice and solutions for urban planners
Improving quality

Mathematical methods, algorithms, applications
Improving quality

Improving quality




                                                                                 Eighth edition

Deutsch/Englisch, English/German
Early intervention
Science and technology




A second start                                                                   Second edition
Discrete mathematics of molecules
                                                                                 Fifth edition
A material for the new millennium
Threats and opportunities in the years ahead
An industry on the brink of expansion
The challenges ahead
Guide for university and college lecturers
                                                                                 Second edition

An introduction for mathematical physicists

Additives                                                             Volume 2

Theory and practice                                                   Textile Progress Vol. 31 No. 3
Fundamentals, processes, applications

Colorants                                                             Volume 1
Auxiliaries                                                  Volume 2
Textile Progress Vol. 31 No. 4
Textile Progress Vol. 32 No. 1




                                                                        Third edition

An introduction
ICTMA 9 - Applications in science and technology
Cellucon ’98 proceedings

Cellucon ’99 proceedings


Fundamentals and applications
                                                                        Second edition

Maximising success

                                                             Volume 1




A comprehensive guide to the gas markets                                Second edition
The chemicals industry
From safety and quality to environmental and other audits
Assessment and monitoring

What can go wrong and how to avoid it
Technologies and applications

A practical guide

                                                                       Third edition
English Version                                              3 Volume set


Learning from others' experience
A guide to fusion welding and associated cutting processes
Contaminants                                                 Volume 1


                                                                        Third edition
Improving quality
Practical applications
Proceedings of the 2nd International Conference, 24th & 25th August 1999,
Bolton Institute, UK




Textile Progress Vol. 30 Nos. 3/4

Mathematical models of conflict

Theory and practice




Chemical and biological aspects
                                                                            Second edition




Proceedings from the Eighth International Conference on Fibre Reinforced
Composites, 13-15 September 2000, University of Newcastle upon Tyne, UK
Theory and applications




A guide to the assessment and evaluation of assets, performance and
prospects
A guide to the assessment and evaluation of assets, performance and
prospects

The pulp and paper industry


Recommendations of IIW subcommission XV-E




Technology change and work management for a global welding industry
Core research from TWI
Core research from TWI
Core research from TWI
Core research from TWI
Core research from TWI
Core research from TWI
Core research from TWI

Synthesis, production and applications
Technology and market trends

Versatile components of plants, soils and water
A survey of law and practice in the European Union

An investigative, integrated approach to practical project work




Basic principles of chemical interactions
Seventh international conference
                                                                             Third edition

Biochemistry and agriculture
A critical review
A global perspective
Theory and practice                                                          Second edition
Planning and cost manager’s guide




Engineering and science

A guide to the assessment and evaluation of assets, performance and
prospects
                                                                             Second edition
Lattices and solids in stereoview
Mathematical methods for applied mathematicians, physicists, engineers
and bioscientists
A reappraisal
An explanatory introduction to the concepts
                                                                             Sixth edition




                                                                             Second edition
Proceedings of the first international conference
Using externally-bonded FRP composites in structural and civil engineering
                                                                   Second edition
Quality management of fruit and vegetables




Advanced methods, properties and applications
Textile Progress Vol. 29 No. 3

Textile Progress Vol. 29 No. 4
German-English/English-German                                      Seventh edition

Theoretical aspects

German-English/English-German                                      Third edition
Current issues
Textile Progress Vol. 29 Nos. 1/2
The food-environment challenge
Sustainable development
A market companion for users of the London Metal Exchange


World projects for year 2000 and beyond


Theory, applications, architecture, code
Eighth international conference
                                                                   Second edition




Design and application                                             Second edition

                                                                   Second edition




An international guide to currency options, trading and practice   Second edition
                                                                   Second edition

Directory and databook                                             Second edition

Manual 1: Ingredients
Manual 4: Baking and cooling of biscuits
Manual 5: Secondary processing in biscuit manufacturing
Manual 6: Biscuit packaging and storage
Manual 2: Biscuit doughs
Manual 3: Biscuit dough piece forming
                                                                              Volume 1 2nd edition

Textile Progress Vol. 28 No. 2
A practical software-based approach


Textile Progress Vol. 27 No. 4
Textile Progress Vol. 28 No.3
Kinematics, dynamics and control


Quadrilingual: German-English-French-Spanish
EUREKA Project EU 716
Structures, properties and uses
The use of intumescence


Textile Progress Vol. 27 No. 3

A practical and legal handbook for lenders, borrowers, investors and their
professional advisers
A global perspective


Microstructure, properties and applications
A handbook for bankers, companies and their advisers
An introductory text for degree studies
Strategy and practice                                                                    Second edition
                                                                                         Second edition

Processes, materials and methods used in the welding of major structures,
pipelines and process plant




                                                                              Volume 4
MIT Brunel lectures on global infrastructure

A systems approach for mathematicians and engineers

For engineers and mathematicians

                                                                                         2nd Edition
Advances and applications
A comprehensive degree text and source book
Proteins, lipids and polysaccharides
                                                                                         Second edition
Health and environmental aspects
Resin transfer moulding, structural reaction injection moulding and related
processing techniques
Recent developments
Risks from occupational exposure
                                                                              Second edition
Principles and applications
Trilingual: German-English-French                                             Second edition
Recommendations of IIW Joint Working Group XIII - XV


Profiting from the psyche
A practical guide to deals, contracts, agreements and promises
Microbiology, packaging, HACCP and ingredients                      Volume 2 Thirteenth edition
                                                                              Thirteenth edition
                                                                    3 Volume set
Food Hygiene and Safety                                             Volume 1
                                                                    Volume 3
Fundamental information on canning                                  Volume 1 Thirteenth edition
Processing procedures for canned food products                      Volume 3 Thirteenth edition
Production methods and trends based on yard capacity
7th European Conference on Composite Materials, London, UK, 1996
A practical legal handbook for managers

An investor’s guide to technical analysis                                     Third edition

Solutions to corrosion and wear-related failures

Cellucon ’94 proceedings

Maths for decision-making in business and industry
A reference guide

Principles and applications


Biochemistry and functionality

Concepts and applications


Cellucon ’93 proceedings: Physico-chemical aspects and industrial
applications

German Version                                                      3 Volume set
The economics of cocoa supply


                                                                              Second edition


                                                                              Second edition
Technology and operations
                                                                                       Second edition
Introductory theory and applications in physical and life science
Textile Progress Vol. 26 No. 1

Evaluation and trading
Developments, impacts and controls

An investigation into the breakdown of international commodity
agreements
Textile Progress Vol. 26 No. 2
A comprehensive guide to the oil markets
Applications in industry, business and science

User-friendly, simplified science
Managing the moral dimension




For the food industries


Evaluation and trading
The story of metals since earliest times and their impact on civilization
Environmental issues
A chemist’s approach
A dictionary and guide
                                                                            Volume 6


An introduction for students of food science and agriculture                           Fourth edition


A user-friendly handbook for skywatchers




A user's handbook
                                                                                       Third edition
Stories and history
                                                                                       Second edition
Stability and mechanical properties


Applications                                                                Volume 2
Chemical and biological aspects

An international compendium
A practical guide
                                                                            Volume 5
A practical guide
A compendium of equations, graphs, computer software and references for
opening profiles of cracks in loaded components and structures




First International Conference




Fundamentals                                                               Volume 1
                                                                                      Third edition
For the production of cereal foods, snack foods and confectionery
A guide to using North American and European markets


A practical workbook
Sources and surveillance


A guide to welding process options, techniques, equipment, NDT and codes
of practice
A study of the influence of joint geometry




Nutrition, technology, analysis and safety
The impact on agriculture and the environment




                                                                                      Second edition
Chemical and biological aspects

Process techniques, recommended practices and applications
An introduction
A guide to the selection of welding and related processes




                                                                                      Fourth edition
                                                                                      Second edition
Non-destructive examination methods for condition monitoring


Creation and evaluation
Man-made fibres                                                            Volume 2
Natural fibres                          Volume 1

Trilingual: German-English-French                  Second edition
Conversion of yarn to fabric                       Second edition
A guide for industrial practice
Compound woven structures
Elementary weaves and figured fabrics              Seventh edition
Trilingual: German-English-French
Series name                                                                Series   Edited By
                                                                           Number

                                                                                    Yes
                                                                                    No
Woodhead Publishing Reviews: Mechanical Engineering Series No.             3        Yes
Woodhead Publishing Series in Energy No.                                   56       Yes
Woodhead Publishing Series in Energy No.                                   41       Yes
                                                                                    No
Woodhead Publishing Series in Energy No.                                   57       Yes
Woodhead Publishing Series in Energy No.                                   53       Yes
Woodhead Publishing Series in Energy No.                                   52       Yes
Woodhead Publishing Series in Energy No.                                   48       Yes
Woodhead Publishing Series in Energy No.                                   51       Yes
Woodhead Publishing Series in Energy No.                                   54       Yes
Woodhead Publishing Series in Energy No.                                   47       Yes
                                                                                    No
Woodhead Publishing Series in Energy No.                                   50       Yes
                                                                                    No
Woodhead Publishing Series in Energy No.                                   55       Yes
Woodhead Publishing Series in Energy No.                                   58       No
Woodhead Publishing Series in Energy No.                                   49       No

Woodhead Publishing Series in Food Science, Technology and Nutrition No.            Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.            Yes
Woodhead Publishing Series in Energy No.                                   45       Yes
Woodhead Publishing Series in Energy No.                                   44       Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.            Yes
Woodhead Publishing Series in Energy No.                                   43       No
Woodhead Publishing Series in Energy No.                                   40       Yes
Woodhead Publishing Series in Energy No.                                   24       Yes
                                                                                    No
Woodhead Publishing Series in Energy No.                                   38       Yes
                                                                                    No
                                                                                    No
                                                                                    No
Woodhead Publishing Series in Energy No.                                   13       Yes
                                                                                    No
                                                                                    Yes
                                                                                    Yes
Woodhead Publishing Series in Textiles No.                                 110      Yes
                                                                                    Yes
                                                                                    Yes
                                                                                    Yes
Woodhead Publishing Series in Textiles No.                                 129      Yes
                                                                                    Yes
Woodhead Publishing Series in Energy No.                                   26       Yes
                                                                                    Yes
Woodhead Publishing Series in Energy No.                                   34       Yes
                                                                                    Yes
                                                                                    Yes
                                                                                    Yes
Woodhead Publishing Series in Textiles No.                                 127   Yes
Woodhead Publishing Series in Textiles No.                                 136   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   239   Yes

Woodhead Publishing Series in Energy No.                                   35    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   235   Yes
Woodhead Publishing Series in Energy No.                                   37    Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   237   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   238   No
Woodhead Publishing Series in Energy No.                                   29    Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   236   Yes
Woodhead Publishing Series in Textiles No.                                 126   Yes
                                                                                 Yes
                                                                                 No
Woodhead Publishing Series in Textiles No.                                 132   No
Woodhead Publishing Series in Energy No.                                   46    No
Woodhead Publishing Series in Textiles No.                                 113   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   42    Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Textiles No.                                 129   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   21    Yes
Woodhead Publishing Series in Textiles No.                                 125   Yes
Woodhead Publishing Series in Textiles No.                                 122   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   234   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   231   Yes
                                                                                 No
                                                                                 No
Woodhead Publishing Series in Textiles No.                                 119   Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   20    Yes
Woodhead Publishing Series in Textiles No.                                 118   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   230   Yes
                                                                                 No
                                                                                 No
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   227   Yes
                                                                                 No

Woodhead Publishing Series in Energy No.                                   33    Yes
                                                                                 Yes
                                                                                 Yes

Woodhead Publishing Series in Food Science, Technology and Nutrition No.   228   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   215   Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   220   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   232   Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   233   Yes
Woodhead Publishing Series in Textiles No.                                 109   No
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   229   Yes
Woodhead Publishing Series in Energy No.                                   32    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   218   Yes
Woodhead Publishing Series in Textiles No.                                 114   No
                                                                                 Yes
Woodhead Publishing Series in Textiles No.                                 128   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 No
                                                                                 No
                                                                                 Yes
                                                                                 No
Woodhead Publishing Series in Energy No.                                   30    Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   39    Yes
Woodhead Publishing Reviews: Mechanical Engineering Series No.             2     Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   31    Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   22    Yes
Woodhead Publishing Series in Energy No.                                   36    Yes
                                                                                 Yes
Woodhead Publishing Series in Energy No.                                   27    Yes
                                                                                 No
Woodhead Publishing Series in Energy No.                                   28    Yes
                                                                                 No
                                                                                 Yes
                                                                                 No
Woodhead Publishing Reviews: Mechanical Engineering Series No.             1     Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   225   Yes
                                                                                 No
                                                                                 No
                                                                                 Yes
Woodhead Publishing Series in Textiles No.                                 105   Yes
                                                                                           Yes
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   226   No
                                                                                           No
Second edition                                                                             No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   216   Yes
          Woodhead Publishing Series in Textiles No.                                 116   Yes
          Woodhead Publishing Series in Textiles No.                                 117   Yes
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           No
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   217   Yes
          Woodhead Publishing Series in Energy No.                                   23    Yes
                                                                                           Yes
          Woodhead Publishing Series in Energy No.                                   19    Yes
                                                                                           Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   206   Yes
                                                                                           No
                                                                                           Yes
                                                                                           Yes
          Woodhead Publishing Series in Textiles No.                                 123   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   222   Yes
                                                                                           No
                                                                                           Yes
          Woodhead Publishing Series in Energy No.                                   25    Yes

          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   213   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   214   Yes
          Woodhead Publishing Series in Textiles No.                                 100   Yes
          World Review of Nutrition and Dietetics Series No.                         102   Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
          Woodhead Publishing Series in Textiles No.                                 108   Yes
                                                                                           Yes
                                                                                           Yes
          Woodhead Publishing Series in Textiles No.                                 121   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   223   Yes
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   211   Yes
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   209   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   208   Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  124   No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    207   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    219   No
                                                                                            Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  120   Yes
                                                                                            No
                                                                                            No
                                                                                            No
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   205   Yes
           Woodhead Publishing Series in Energy No.                                   18    Yes
Second edition                                                                              No
                                                                                            Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    221   Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  104   Yes
          Woodhead Publishing Series in Textiles No.                                  112   Yes
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    210   Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    212   Yes
          Woodhead Publishing Series in Energy No.                                    2     Yes

                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            No
          Woodhead Publishing Series in Energy No.                                    17    Yes
          Woodhead Publishing Series in Textiles No.                                  89    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    204   Yes
          Nestlé Nutrition Workshop Series: Pediatric program Series No.              67    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    203   Yes
                                                                                            Yes
          Woodhead Publishing Series in Energy No.                                    12    Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  106   Yes
                                                                                            Yes
                                                                                            No
Second edition                                                                               No
                                                                                             Yes
           Woodhead Publishing Series in Energy No.                                    10    Yes
                                                                                             Yes
                                                                                             Yes
Third edition                                                                                No
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.   201   Yes

           Woodhead Publishing Series in Textiles No.                                  111   Yes
                                                                                             Yes
                                                                                             Yes
           Woodhead Publishing Series in Energy No.                                    15    Yes
                                                                                             Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    196   Yes
                                                                                             No
                                                                                             Yes
                                                                                             Yes
                                                                                             Yes
                                                                                             Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    197   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    202   Yes

           Woodhead Publishing Series in Energy No.                                    4     Yes
                                                                                             No
Third edition                                                                                No
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.   194   Yes
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.   192   Yes
                                                                                             Yes
           Woodhead Publishing Series in Textiles No.                                  99    Yes
                                                                                             Yes
           Woodhead Publishing Series in Textiles No.                                  95    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    199   Yes
                                                                                             Yes
                                                                                             No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    200   Yes
                                                                                             No
           Woodhead Publishing Series in Textiles No.                                  107   Yes
                                                                                             No
           Woodhead Publishing Series in Textiles No.                                  103   Yes
                                                                                             Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    195   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    198   No
           Woodhead Publishing Series in Energy No.                                    9     Yes

           Woodhead Publishing Series in Energy No.                                    6     Yes
                                                                                             Yes
                                                                                             Yes
                                                                                             Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    193   Yes
                                                                                             Yes
           Woodhead Publishing Series in Textiles No.                                  75    Yes
           Woodhead Publishing Series in Energy No.                                    16    Yes
                                                                                 Yes
Woodhead Publishing Series in Textiles No.                                 101   Yes
Woodhead Publishing Series in Energy No.                                   8     Yes
Woodhead Publishing Series in Textiles No.                                 102   Yes
                                                                                 Yes
The Oily Press Lipid Library Series No.                                    24    No
Woodhead Publishing Series in Energy No.                                   3     Yes
Woodhead Publishing Series in Energy No.                                   5     Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   191   Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   190   Yes
                                                                                 No
                                                                                 No
                                                                                 No
World Review of Nutrition and Dietetics Series No.                         101   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   187   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   186   Yes
Woodhead Publishing Series in Energy No.                                   14    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   189   Yes
                                                                                 No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   188   Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Textiles No.                                 115   No
                                                                                 Yes
                                                                                 No
Woodhead Publishing Series in Energy No.                                   7     No
                                                                                 No
Nestlé Nutrition Workshop Series: Pediatric program Series No.             65    Yes
Nestlé Nutrition Workshop Series: Pediatric program Series No.             66    Yes
                                                                                 No
Woodhead Publishing Series in Textiles No.                                 90    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   185   Yes
                                                                                 Yes
Forum of Nutrition Series No.                                              63    Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   184   Yes
                                                                                 Yes
World Review of Nutrition and Dietetics Series No.                         99    Yes
Woodhead Publishing Series in Textiles No.                                 94    Yes
                                                                                 No
                                                                                 Yes
                                                                                 Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.   183   Yes
                                                                                 No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   182   Yes
                                                                                            Yes
                                                                                            No
           Woodhead Publishing Series in Textiles No.                                 88b   Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 88a   Yes
           Woodhead Publishing Series in Textiles No.                                 98    Yes
           Woodhead Publishing Series in Textiles No.                                 91    Yes
                                                                                            No
Third edition                                                                               No
Third edition                                                                               No
            Woodhead Publishing Series in Textiles No.                                93    Yes
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 92    Yes
           Forum of Nutrition Series No.                                              62    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   181   Yes
                                                                                            Yes
                                                                                            No
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   180   No
           Woodhead Publishing Series in Textiles No.                                 97    Yes
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   179   No
           Nestlé Nutrition Workshop Series: Pediatric program Series No.             64    Yes
                                                                                            Yes
                                                                                            Yes
           World Review of Nutrition and Dietetics Series No.                         100   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   177   Yes

           Woodhead Publishing Series in Energy No.                                   11    No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   178   Yes
                                                                                            Yes
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   176   Yes
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   175   Yes

           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   174   No
                                                                                            Yes
                                                                                            No
           The Oily Press Lipid Library Series No.                                    23    Yes
           Woodhead Publishing Series in Textiles No.                                 96    No
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   173   Yes
                                                                                            Yes
                                                                                            No
           Woodhead Publishing Series in Textiles No.                                 85    Yes
Second edition                                                                              No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   172   Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            No
Ninth edition                                                                               No
                                                                                            Yes
           Forum of Nutrition Series No.                                              61    Yes
           Woodhead Publishing Series in Textiles No.                                 86    Yes
Second edition                                                                              No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   170   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   169   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   171   Yes
           Woodhead Publishing Series in Textiles No.                                 87    Yes
                                                                                            No
           Nestlé Nutrition Workshop Series: Pediatric program Series No.             63    Yes
                                                                                            No
                                                                                            No
           Woodhead Publishing Series in Textiles No.                                 83    Yes
           Woodhead Publishing Series in Textiles No.                                 84    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   168   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   167   Yes
           Woodhead Publishing Series in Textiles No.                                 82    Yes
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   166   Yes
                                                                                            Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 72    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   165   Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 81    No
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 79    Yes
                                                                                            Yes
                                                                                            No
           Woodhead Publishing Series in Textiles No.                                 68    No
           Woodhead Publishing Series in Textiles No.                                 80    Yes
           Woodhead Publishing Series in Textiles No.                                 77    Yes
                                                                                            Yes
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   164   Yes
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   163   Yes
           Woodhead Publishing Series in Textiles No.                                 70    Yes
           Woodhead Publishing Series in Textiles No.                                 76    Yes
           Woodhead Publishing Series in Textiles No.                                 74    No

                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   162   Yes
                                                                                            No
          World Review of Nutrition and Dietetics Series No.                          98    Yes
          Nestlé Nutrition Workshop Series: Pediatric program Series No.              62    Yes
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    161   Yes
                                                                                            Yes

                                                                                            Yes
                                                                                            Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    160   Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  71    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    159   Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  78    Yes
          The Oily Press Lipid Library Series No.                                     22    Yes
                                                                                            No
          European Federation of Corrosion (EFC) Series No.                           47    Yes
                                                                                            Yes
          Woodhead Publishing Series in Textiles No.                                  69    Yes
          Woodhead Publishing Series in Textiles No.                                  73    Yes
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    158   Yes
                                                                                            Yes
                                                                                            Yes
          Woodhead Publishing Series in Energy No.                                    1     No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    157   Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            No
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    156   Yes
                                                                                            Yes
                                                                                            No
                                                                                            Yes
                                                                                            Yes
          European Federation of Corrosion (EFC) Series No.                           55    Yes
                                                                                            Yes
                                                                                            Yes
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    155   Yes
                                                                                            No
          Nestlé Nutrition Workshop Series: Pediatric program Series No.              61    Yes
                                                                                            Yes
                                                                                            No
Second edition                                                                              Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   154   Yes
                                                                                            No
Third edition                                                                               No
Second edition                                                                              No
                                                                                            No
Second edition                                                                              No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   153   Yes
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    152   Yes
                                                                                            No
                                                                                            No
                                                                                            Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    151   Yes
          Woodhead Publishing Series in Textiles No.                                  67    Yes
                                                                                            Yes
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    150   Yes
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    149   Yes
                                                                                            No
          European Federation of Corrosion (EFC) Series No.                           54    Yes
                                                                                            Yes
                                                                                            No
                                                                                            No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    148   Yes
                                                                                            No
                                                                                            Yes
          European Federation of Corrosion (EFC) Series No.                           42    No
          European Federation of Corrosion (EFC) Series No.                           53    Yes
                                                                                            No
                                                                                            Yes
          Forum of Nutrition Series No.                                               60    Yes

          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    144   Yes
          Nestlé Nutrition Workshop Series: Pediatric program Series No.              60    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    147   Yes
          European Federation of Corrosion (EFC) Series No.                           51    Yes
                                                                                            No
           European Federation of Corrosion (EFC) Series No.                          41    No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   146   Yes
Second edition                                                                              No
           The Oily Press Lipid Library Series No.                                    20    No
           The Oily Press Lipid Library Series No.                                    21    No
                                                                                            No
          Nestlé Nutrition Workshop Series: Pediatric program Series No.              59    Yes
          World Review of Nutrition and Dietetics Series No.                          96    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    145   Yes
                                                                                            Yes
                                                                                            Yes
          European Federation of Corrosion (EFC) Series No.                           50    No
          Woodhead Publishing Series in Textiles No.                                  66    No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    143   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    142   Yes
                                                                                            No
           European Federation of Corrosion (EFC) Series No.                          49    No
           Woodhead Publishing Series in Textiles No.                                 65    No
           European Federation of Corrosion (EFC) Series No.                          46    No
           Woodhead Publishing Series in Textiles No.                                 64    Yes
Second edition                                                                              No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   141   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   140   No
           European Federation of Corrosion (EFC) Series No.                          48    No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   139   Yes
                                                                                            No
          European Federation of Corrosion (EFC) Series No.                           45    Yes
          Woodhead Publishing Series in Textiles No.                                  62    Yes
          Woodhead Publishing Series in Textiles No.                                  63    Yes
                                                                                            No
                                                                                            Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    138   Yes
          Woodhead Publishing Series in Textiles No.                                  60    Yes
          Woodhead Publishing Series in Textiles No.                                  61    Yes
                                                                                            No
                                                                                            No
           World Review of Nutrition and Dietetics Series No.                         97    Yes
2nd edition                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   137   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   136   Yes
           Woodhead Publishing Series in Textiles No.                                 59    Yes
           Woodhead Publishing Series in Textiles No.                                 58    Yes
           Woodhead Publishing Series in Textiles No.                                 57    Yes
           European Federation of Corrosion (EFC) Series No.                          44    No
           European Federation of Corrosion (EFC) Series No.                          43    No

          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    134   Yes
          European Federation of Corrosion (EFC) Series No.                           38    Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    135   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    133   Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                 56    Yes
Second edition                                                                              No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   132   Yes
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    131   Yes
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    130   No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    129   Yes
                                                                                            No

                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    128   No
                                                                                            No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    127   Yes
          Woodhead Publishing Series in Textiles No.                                  55    No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    126   Yes
                                                                                            No
           Woodhead Publishing Series in Textiles No.                                      54    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        125   Yes
                                                                                                 No
                                                                                                 No
                                                                                                 Yes
                                                                                                 No
                                                                                                 Yes
                                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        124   No
           Forum of Nutrition Series No.                                                   59    Yes
           Nestlé Nutrition Workshop Series: Pediatric program Series No.                  58    Yes
           Nestlé Nutrition Workshop Series: Clinical and performance program Series No.   11    Yes
                                                                                                 No
                                                                                                 No
           The Oily Press Lipid Library Series No.                                         19    No
           Nestlé Nutrition Workshop Series: Pediatric program Series No.                  57    Yes
                                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        123   Yes
                                                                                                 Yes
                                                                                                 Yes
                                                                                                 Yes
Third edition                                                                                    No
            Woodhead Publishing Series in Textiles No.                                     53    Yes
            Woodhead Publishing Series in Textiles No.                                     52    Yes
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      51    No
                                                                                                 Yes
                                                                                                 No
                                                                                                 No
                                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        121   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        122   Yes
           Woodhead Publishing Series in Textiles No.                                      50    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        120   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        119   Yes
Second edition                                                                                   No

                                                                                                 Yes
                                                                                                 No
                                                                                                 No
                                                                                                 No
           Woodhead Publishing Series in Textiles No.                                      49    Yes
                                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        118   Yes
                                                                                                 Yes
                                                                                                 Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        117   Yes
                                                                                                 No
                                                                                                 No
                                                                                                 No
                                                                                                 No
           Woodhead Publishing Series in Textiles No.                                      47    Yes
           Woodhead Publishing Series in Textiles No.                                      48    Yes
                                                                                                 Yes
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      42    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        116   Yes
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      44    Yes
                                                                                                 Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        115   Yes
                                                                                                 Yes
                                                                                                 Yes
                                                                                                 Yes
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      40    Yes
                                                                                                 Yes
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      38    No
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      45    Yes
                                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        114   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.        113   Yes
                                                                                                 No
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.       110   Yes
            Woodhead Publishing Series in Textiles No.                                     41    Yes
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.       111   Yes
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.       112   Yes
Third edition                                                                                    No
                                                                                                 Yes
                                                                                                 Yes
           The Oily Press Lipid Library Series No.                                         18    No
           Forum of Nutrition Series No.                                                   57    Yes

                                                                                                 Yes
           Nestlé Nutrition Workshop Series: Pediatric program Series No.                  55    Yes
           Nestlé Nutrition Workshop Series: Clinical and performance program Series No.   10    Yes
           Nestlé Nutrition Workshop Series: Pediatric program Series No.                  56    Yes
           World Review of Nutrition and Dietetics Series No.                              94    Yes
           World Review of Nutrition and Dietetics Series No.                              95    Yes

           Forum of Nutrition Series No.                                                   58    Yes
                                                                                                 No
                                                                                                 Yes
           Woodhead Publishing Series in Textiles No.                                      43    No
                                                                                                 Yes
                                                                                                 Yes
                                                                                                 Yes
                                                                                                 No
           Woodhead Publishing Series in Textiles No.                                      46    Yes
           Woodhead Publishing Series in Textiles No.                                      39    Yes
                                                                                                 No
                                                                                                 Yes
                                                                                   No
                                                                                   No
                                                                                   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     109   Yes

                                                                                   No
                                                                                   Yes
                                                                                   No
Woodhead Publishing Series in Textiles No.                                   36    Yes
Woodhead Publishing Series in Textiles No.                                   35    No
                                                                                   No

                                                                                   No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     108   No
Woodhead Publishing Series in Textiles No.                                   33    No
                                                                                   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     107   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     105   Yes
Woodhead Publishing Series in Textiles No.                                   32    No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     106   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     103   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     104   Yes
                                                                                   No
                                                                                   No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     102   Yes
The Oily Press Lipid Library Series No.                                      17    Yes
Nestlé Nutrition Workshop Series: Pediatric program Series No.               54    Yes
                                                                                   Yes
Nestlé Nutrition Workshop Series: Pediatric program Series No.                53   Yes
Nestlé Nutrition Workshop Series: Clinical and performance program Series No. 9    Yes
                                                                                   No
                                                                                   No
                                                                                   No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     101   Yes
                                                                                   Yes

World Review of Nutrition and Dietetics Series No.                           93    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     100   Yes
                                                                                   No
                                                                                   Yes
                                                                                   No
                                                                                   Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     98    Yes
Woodhead Publishing Series in Textiles No.                                   34    No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     99    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     97    Yes
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     96    Yes
                                                                                   No
Woodhead Publishing Series in Food Science, Technology and Nutrition No.     95    No
Woodhead Publishing Series in Textiles No.                                   37    No
                                                                                   No
                                                                                   No
                                                                                               No
                                                                                               Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        93   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        94   Yes
                                                                                               Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        91   Yes
          Woodhead Publishing Series in Textiles No.                                      29   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        90   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        92   Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        89   Yes
                                                                                               Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        87   Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        88   Yes
                                                                                               No
                                                                                               Yes
          Woodhead Publishing Series in Textiles No.                                      28   No
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        86   Yes
                                                                                               No
                                                                                               No
Second edition                                                                                 No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.       85   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.       84   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.       83   Yes
           Woodhead Publishing Series in Textiles No.                                     27   No
           World Review of Nutrition and Dietetics Series No.                             91   Yes
                                                                                               No
          Nestlé Nutrition Workshop Series: Clinical and performance program Series No.   8    Yes
          The Oily Press Lipid Library Series No.                                         14   No
          The Oily Press Lipid Library Series No.                                         13   Yes
          Nestlé Nutrition Workshop Series: Pediatric program Series No.                  52   Yes
          World Review of Nutrition and Dietetics Series No.                              92   Yes
          The Oily Press Lipid Library Series No.                                         16   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        82   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        81   Yes
                                                                                               No
          Woodhead Publishing Series in Textiles No.                                      30   No
          Woodhead Publishing Series in Textiles No.                                      31   No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        80   Yes
                                                                                               No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        79   Yes
                                                                                               Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.        78   Yes
                                                                                               No
                                                                                               No
Second Edition                                                                                 Yes
                                                                                               No
                                                                                                   No
                                                                                                   No
  Second edition                                                                                   No
  Second edition                                                                                   No
  Second edition                                                                                   Yes
                                                                                                   No
                                                                                                   Yes
              Woodhead Publishing Series in Textiles No.                                      24   No
                                                                                                   Yes

                                                                                                   No
                                                                                                   No
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        77   Yes
                                                                                                   No
  Second edition                                                                                   No
                                                                                                   Yes
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        76   Yes
                                                                                                   No
                                                                                                   No
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        75   Yes
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        74   Yes
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        73   Yes
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        72   Yes
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        71   Yes
                                                                                                   No
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        70   No
                                                                                                   No
              Woodhead Publishing Series in Textiles No.                                      26   No
              Nestlé Nutrition Workshop Series: Clinical and performance program Series No.   7    Yes
              Woodhead Publishing Series in Textiles No.                                      25   Yes
              Woodhead Publishing Series in Textiles No.                                      23   No
                                                                                                   Yes
                                                                                                   No
             Woodhead Publishing Series in Food Science, Technology and Nutrition No.         69   No
  Second edition                                                                                   No
                                                                                                   No
  Fifth edition                                                                                    No
                                                                                                   No
                                                                                                   No
                                                                                                   No
                                                                                                   No
                                                                                                   No
  Second edition                                                                                   No
             Woodhead Publishing Series in Food Science, Technology and Nutrition No.         67   Yes
                                                                                                   No
                                                                                                   No
              Woodhead Publishing Series in Food Science, Technology and Nutrition No.        66   Yes
                                                                                                   No
ogress Vol. 31 No. 3                                                                               No
                                                                                                   No
                                                                                                   No
                                                                                                   Yes
                                                                                            No
                                                                                            Yes
                                                                                            No
                                                                                            No
                                                                                            No
                                                                                            No
                                                                                            No
Third edition                                                                               No
                                                                                            No
                                                                                            No
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                  19   Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                  15   Yes
           Woodhead Publishing Series in Textiles No.                                  21   No
           Woodhead Publishing Series in Textiles No.                                  20   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    65   Yes
           Woodhead Publishing Series in Textiles No.                                  14   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    64   No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    63   Yes
                                                                                            No
                                                                                            Yes
                                                                                            No
Second edition                                                                              Yes
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    62   Yes
                                                                                            No
                                                                                            No
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    61   Yes
                                                                                            Yes
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.   60   Yes
            Woodhead Publishing Series in Food Science, Technology and Nutrition No.   59   Yes
Third edition                                                                               No
            Woodhead Publishing Series in Textiles No.                                 22   No
            Forum of Nutrition Series No.                                              55   Yes
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    58   Yes
                                                                                            No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    57   Yes
           Woodhead Publishing Series in Textiles No.                                  18   Yes
                                                                                            Yes
           Woodhead Publishing Series in Textiles No.                                  16   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    56   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    55   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    54   No
                                                                                            No
                                                                                            No
                                                                                            Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.    53   Yes
                                                                                          Yes
          Woodhead Publishing Series in Textiles No.                                 17   Yes

                                                                                          No
                                                                                          Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   52   No
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                          Yes
                                                                                          No
                                                                                          No
                                                                                          No
          Woodhead Publishing Series in Textiles No.                                 13   No
                                                                                          No
          Woodhead Publishing Series in Textiles No.                                 12   Yes
                                                                                          No
                                                                                          Yes
          Woodhead Publishing Series in Textiles No.                                 11   No
                                                                                          Yes
                                                                                          No
Second edition                                                                            No
                                                                                          No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   51   Yes
                                                                                          No
                                                                                          Yes

                                                                                          No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   48   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   47   Yes
                                                                                          No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   46   Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   45   Yes
                                                                                          Yes
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.   43   Yes
                                                                                          Yes
                                                                                          No

                                                                                          No

                                                                                          No
                                                                                          No
          The Oily Press Lipid Library Series No.                                    12   No
                                                                                          Yes
                                                                                          Yes
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                          No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
Third edition                                                                              No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   39   Yes
                                                                                           No
                                                                                           No
Second edition                                                                             Yes
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No

Second edition                                                                             No
                                                                                           No
                                                                                           No

           The Oily Press Lipid Library Series No.                                    11   No
                                                                                           No
Sixth edition                                                                              No
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
Second edition                                                                             Yes
                                                                                           No
                                                                                           Yes

                                                                                           Yes
Second edition                                                                             No
                                                                                           No
           Woodhead Publishing Series in Textiles No.                                 10   No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           No
                                                                                           Yes
                                                                                           No
Seventh edition                                                                            No
                                                                                           Yes
                                                                                           No
                                                                                           No
Third edition                                                                              No
                                                                                           Yes
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   8    Yes
           Woodhead Publishing Series in Textiles No.                                 9    Yes
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
Second edition                                                                             No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
Second edition                                                                             No
                                                                                           No
           Woodhead Publishing Series in Textiles No.                                 8    No
                                                                                           Yes
                                                                                           No
                                                                                           No
Second edition                                                                             No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   36   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   18   Yes
Second edition                                                                             No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   30   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   33   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   34   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   35   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   31   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   32   No
                                                                                           No
2nd edition                                                                                No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   17   Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    26   No
                                                                                           No
                                                                                           No
                                                                                           No

                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           No
                                                                                           No
Second edition                                                                             No
Second edition                                                                             No
                                                                                           Yes
                                                                                           No

                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    28   Yes
                                                                                           No
                                                                                           No
          The Oily Press Lipid Library Series No.                                     8    No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
2nd Edition                                                                                Yes
                                                                                           Yes
                                                                                           No
          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    15   Yes
          Woodhead Publishing Series in Textiles No.                                  7    No
                                                                                           Yes
                                                                                           No

          Woodhead Publishing Series in Food Science, Technology and Nutrition No.    20   Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
Second edition                                                                             No
                                                                                           No
Second edition                                                                             No
                                                                                           Yes
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
Thirteenth edition                                                                         Yes
Thirteenth edition                                                                         No
                                                                                           Yes
           The Oily Press Lipid Library Series No.                                    7    No
Thirteenth edition                                                                         Yes
Thirteenth edition                                                                         Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
Third edition                                                                              No
                                                                                           No
                                                                                           Yes
           Woodhead Publishing Series in Textiles No.                                 6    Yes
                                                                                           Yes
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   24   No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   27   Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes

                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
Second edition                                                                             No
                                                                                           No
                                                                                           Yes
Second edition                                                                             No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
Second edition                                                                             No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   9    Yes
                                                                                           Yes
                                                                                           No

                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   22   No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   25   No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
Third edition                                                                              No
                                                                                           No
Second edition                                                                             No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   14   No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   29   Yes
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   19   No
                                                                                           No
                                                                                           No

                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
Third edition                                                                              No
                                                                                           No
                                                                                           Yes
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   6    Yes
                                                                                           No
                                                                                           No
                                                                                           Yes

                                                                                           No
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
                                                                                           Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   7    Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   21   Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   5    No
                                                                                           Yes
Second edition                                                                             No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   10   No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
                                                                                           No
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   11   No
                                                                                           Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   23   No
Fourth edition                                                                             No
Second edition                                                                             No
                                                                                           Yes
           Woodhead Publishing Series in Food Science, Technology and Nutrition No.   16   Yes
                                                                                           Yes
                                                                                           Yes
           Woodhead Publishing Series in Textiles No.                                 5    No
           Woodhead Publishing Series in Textiles No.   4   No
                                                            Yes
Second edition                                              No
           Woodhead Publishing Series in Textiles No.   3   No
                                                            No
           Woodhead Publishing Series in Textiles No.   2   Yes
           Woodhead Publishing Series in Textiles No.   1   Yes
                                                            No
Lead author initials Lead author surname Binding   Extent   Publication   Publicatio Price GBP Price USD
                                                            Date          n Year

J                  Paulo Davim          hardback   200      2/27/2014     Q1 2014    135.00   230.00
F                  Wardle               hardback   200      5/31/2013     Q2 2013    115.00   195.00
JP                 Davim                hardback   368      5/31/2013     Q2 2013    135.00   230.00
A                  Basile               hardback   570      3/31/2013     Q1 2013    155.00   265.00
D                  Zhang                hardback   450      3/31/2013     Q1 2013    145.00   245.00
A                  Nedoseka             hardback   750      3/31/2013     Q1 2013    170.00   290.00
R                  Folkson              hardback   810      3/31/2013     Q1 2013    180.00   305.00
KW                 Waldron              hardback   810      3/31/2013     Q1 2013    180.00   305.00
A                  Wellinger            hardback   690      3/31/2013     Q1 2013    165.00   280.00
B                  Lee                  hardback   690      3/31/2013     Q1 2013    165.00   280.00
A                  Shibli               hardback   630      3/31/2013     Q1 2013    160.00   270.00
J                  Gluyas               hardback   450      3/31/2013     Q1 2013    145.00   245.00
P                  Brøndsted            hardback   750      3/31/2013     Q1 2013    170.00   290.00
B                  Mann                 hardback   300      3/31/2013     Q1 2013    105.00   180.00
D                  Osborne              hardback   690      3/31/2013     Q1 2013    165.00   280.00
G                  Thilagavathi         hardback   350      3/31/2013     Q1 2013    105.00   180.00
A                  Basile               hardback   630      3/31/2013     Q1 2013    160.00   270.00
C                  Lan                  hardback   390      3/31/2013     Q1 2013    135.00   230.00
GV                 Arkadov              hardback   432      3/31/2013     Q1 2013    145.00   245.00

B                  McNeil               hardback   630      3/31/2013     Q1 2013    160.00   270.00
P                  Brereton             hardback   450      3/31/2013     Q1 2013    145.00   245.00
A                  Shirzadi             hardback   690      3/31/2013     Q1 2013    165.00   280.00
KL                 Murty                hardback   570      3/31/2013     Q1 2013    155.00   265.00
L                  Harris               hardback   690      3/31/2013     Q1 2013    165.00   280.00
P                  Fennell              hardback   390      3/31/2013     Q1 2013    135.00   230.00
L                  Rosendahl            hardback   450      3/31/2013     Q1 2013    145.00   245.00
M                  Mueller              hardback   300      3/31/2013     Q1 2013    125.00   210.00
KJ                 Venugopal            hardback   300      3/31/2013     Q1 2013    105.00   180.00
Z                  Melhem               hardback   450      3/31/2013     Q1 2013    145.00   245.00
M                  Aliofkhazraei        hardback   250      3/31/2013     Q1 2013    115.00   195.00
B                  Necká?               hardback   300      3/31/2013     Q1 2013    105.00   180.00
S                  Mukhopadhyay         hardback   200      3/31/2013     Q1 2013    95.00    160.00
DG                 Cacuci               hardback   270      3/31/2013     Q1 2013    115.00   195.00
VA                 Soifer               hardback   750      3/31/2013     Q1 2013    170.00   290.00
D                  Saeedkia             hardback   900      10/31/2012    Q4 2012    200.00   325.00
A                  Emblem               hardback   500      10/31/2012    Q4 2012    150.00   255.00
I                  Jones                hardback   480      10/31/2012    Q4 2012    155.00   265.00
YN                 Zhou                 hardback   510      10/31/2012    Q4 2012    150.00   255.00
H                  Brandon              hardback   270      10/31/2012    Q4 2012    115.00   195.00
S                  Higson               hardback   568      10/31/2012    Q4 2012    155.00   265.00
R                  Shishoo              hardback   270      10/31/2012    Q4 2012    120.00   205.00
J-P                Boutrand             hardback   510      10/31/2012    Q4 2012    150.00   255.00
N                  Soneda               hardback   510      10/31/2012    Q4 2012    150.00   255.00
P                  Gomes                hardback   448      10/31/2012    Q4 2012    145.00   245.00
F                  Zeman                hardback   840      10/31/2012    Q4 2012    190.00   325.00
T                  Webster              hardback   688      10/31/2012    Q4 2012    165.00   280.00
P                  Vallittu             hardback   448      10/31/2012    Q4 2012    145.00   245.00
K                  Barmak               hardback   750      10/31/2012    Q4 2012    180.00   305.00
A     Majumdar       hardback    300    10/31/2012   Q4 2012   130.00   220.00
D     Veit           hardback    300    10/31/2012   Q4 2012   130.00   220.00
M     Kraft          hardback    390    10/31/2012   Q4 2012   140.00   240.00
K     Uchino         hardback    450    10/31/2012   Q4 2012   155.00   265.00
P     Morris         hardback    448    10/31/2012   Q4 2012   145.00   245.00
M     Pekguleryuz    hardback    300    10/31/2012   Q4 2012   125.00   210.00
N     Garti          hardback    810    10/30/2012   Q4 2012   180.00   305.00

J     Kilner         hardback    660    9/30/2012    Q3 2012   165.00   280.00
D     Schrenk        hardback    690    9/30/2012    Q3 2012   165.00   280.00
I     Crossland      hardback    630    9/30/2012    Q3 2012   160.00   270.00
J     Lin            hardback    448    9/30/2012    Q3 2012   145.00   245.00
J     Delcour        hardback    750    9/30/2012    Q3 2012   170.00   290.00
D-W   Sun            hardback    510    9/30/2012    Q3 2012   150.00   255.00
M     Castaldi       hardback    420    9/30/2012    Q3 2012   145.00   245.00
A     Baranov        hardback    510    9/30/2012    Q3 2012   155.00   265.00
K     Nakamura       hardback    690    8/31/2012    Q3 2012   175.00   300.00
S     Le Rouge       hardback    390    8/31/2012    Q3 2012   135.00   230.00
D     Caldwell       hardback    630    8/31/2012    Q3 2012   160.00   270.00
R     Sinclair       hardback    700    8/31/2012    Q3 2012   45.00    75.00
V     Goodship       hardback    1020   8/31/2012    Q3 2012   235.00   400.00
D     Alkazraji      paperback   176    8/31/2012    Q3 2012   40.00    70.00
R     Shamey         hardback    300    8/31/2012    Q3 2012   125.00   210.00
JCJ   Bart           hardback    450    8/31/2012    Q3 2012   145.00   245.00
MW    King           hardback    350    8/31/2012    Q3 2012   140.00   240.00
F     Jahnke         hardback    510    7/31/2012    Q3 2012   155.00   265.00
S     Bhansali       hardback    624    7/31/2012    Q3 2012   160.00   270.00
F     Gao            hardback    448    7/31/2012    Q3 2012   145.00   245.00
A     Inmann         hardback    504    7/31/2012    Q3 2012   150.00   255.00
Ch    Poinssot       hardback    510    7/31/2012    Q3 2012   155.00   265.00
M     Jenkins        hardback    250    7/31/2012    Q3 2012   120.00   205.00
S     Advani         hardback    450    7/31/2012    Q3 2012   145.00   245.00
Q     Wei            hardback    390    7/31/2012    Q3 2012   140.00   240.00
DP    Sekulic        hardback    570    7/31/2012    Q3 2012   155.00   265.00
N     Vainos         hardback    450    7/30/2012    Q3 2012   150.00   255.00
K     De Smet        hardback    624    7/30/2012    Q3 2012   175.00   300.00
K     Lovegrove      hardback    600    7/30/2012    Q3 2012   160.00   270.00
K     Gandhi         hardback    320    7/30/2012    Q3 2012   140.00   240.00
E     Sparks         hardback    390    7/30/2012    Q3 2012   140.00   240.00
A     Demirci        hardback    750    6/30/2012    Q2 2012   180.00   305.00
D     Heaney         hardback    600    6/30/2012    Q2 2012   165.00   180.00
J     Weitzenböck    hardback    250    6/30/2012    Q2 2012   120.00   205.00
T     Young          hardback    400    6/30/2012    Q2 2012   145.00   245.00
B     Austin         hardback    570    6/30/2012    Q2 2012   155.00   265.00
D     Murray-Smith   hardback    200    6/30/2012    2012      115.00   195.00
J     Meseguer       hardback    200    6/30/2012    2012      115.00   195.00
R     Kozlowski      hardback    448    6/30/2012    Q2 2012   145.00   245.00
M     Prudenziati    hardback    570    6/30/2012    Q2 2012   165.00   280.00
P     Jansohn        hardback    640    6/30/2012    Q2 2012   160.00   270.00
R     Kozlowski      hardback    390    6/30/2012    Q2 2012   135.00   230.00
KL    Yam            hardback    480    5/31/2012    2012      155.00   265.00
J     Gubicza        hardback    200    5/31/2012    2012      115.00   195.00
                           paperback   380   5/31/2012    Q2 2012   315.00   535.00
S          Affatato        hardback    450   5/31/2012    Q2 2012   145.00   245.00
KV         Peter           hardback    560   5/31/2012    Q2 2012   160.00   270.00
A          Sahay           hardback    200   5/31/2012    2012      115.00   195.00

M          Hall            hardback 810      5/30/2012    Q2 2012   180.00   305.00
E          Pereloma        hardback 720      5/30/2012    Q2 2012   170.00   290.00
E          Pereloma        hardback 784      5/30/2012    Q2 2012   180.00   305.00

KV         Peter           hardback    540   5/30/2012    Q2 2012   160.00   270.00
J          Fink-Gremmels   hardback    750   5/30/2012    Q2 2012   170.00   290.00
IM         Low             hardback    350   5/30/2012    2012      145.00   245.00
JP         Kerry           hardback    690   5/30/2012    Q2 2012   165.00   280.00
PC         Calder          hardback    960   5/30/2012    Q2 2012   225.00   385.00
T          Gourlay         hardback    256   4/30/2012    2012      120.00   205.00
D          Baines          hardback    512   4/30/2012    2012      150.00   255.00
I          Vilumsone       hardback    250   4/30/2012    2012      115.00   195.00
C          Bettles         hardback    400   4/30/2012    2012      135.00   230.00
S          Cauvain         hardback    832   4/30/2012    2012      225.00   385.00
A          Rao             hardback    300   4/30/2012    2012      125.00   210.00
Q          Huang           hardback    510   4/30/2012    2012      150.00   255.00
C          Atkinson        hardback    208   4/30/2012    2012      120.00   205.00
A          Atala           hardback    536   3/31/2012    2012      165.00   280.00
J          Best            hardback    640   3/31/2012    2012      175.00   300.00
L          Ambrosio        hardback    640   3/31/2012    2012      170.00   290.00
CT         Kwok            hardback    408   3/31/2012    2012      150.00   255.00
N          Gokarneshan     hardback    200   3/31/2012    Q1 2012   95.00    160.00
VS         Aslanov         hardback    275   3/31/2012    2012      115.00   195.00
J          Rowe            hardback    352   3/31/2012    2012      140.00   240.00
M          Ramezani        hardback    200   3/31/2012    2012      125.00   210.00
C          Hartnig         hardback    416   3/31/2012    2012      135.00   230.00
SG         Tan             hardback    280   3/31/2012    2012      120.00   205.00
R          Luque           hardback    272   3/31/2012    2012      125.00   210.00
J. Paulo   Davim           hardback    200   3/30/2012    2012      135.00   230.00
M          Driver          hardback    352   2/29/2012    2012      135.00   230.00
C          Hartnig         hardback    544   2/29/2012    2012      165.00   280.00
P          Robinson        hardback    472   2/29/2012    2012      155.00   265.00
D          Féron           hardback    992   2/29/2012    2012      225.00   385.00
M          Laraia          hardback    752   2/29/2012    2012      180.00   305.00
VS         Saji            hardback    416   2/28/2012    2012      150.00   255.00
Z          Melhem          hardback    432   1/31/2012    2012      150.00   255.00
J          Hayavadana      hardback    350   1/31/2012    Q1 2012   105.00   180.00
A          Alonso          hardback    872   1/31/2012    2012      190.00   325.00
G          Colovic         hardback    200   1/31/2012    Q1 2012   90.00    155.00
VP         Astakhov        hardback    424   1/31/2012    2012      150.00   255.00
N          Roussel         hardback    384   1/31/2012    2012      140.00   240.00
JP         Davim           hardback    386   1/30/2012    2012      145.00   245.00
J          Piggott         hardback    520   12/31/2011   2011      155.00   265.00
RP         Gangloff        hardback    520   12/31/2011   2011      160.00   270.00
A          Mouritz         paperback   624   12/31/2011   2011      45.00    75.00
MC         Chaturvedi      hardback    448   12/31/2011   2011      155.00   265.00
L          Horne           hardback    224   12/31/2011   2011      125.00   210.00
RP    Gangloff        hardback    864        12/31/2011    2011         195.00     330.00
                      paperback   300        11/30/2011    2011         300.00     510.00
MN    Riaz            hardback    184        11/30/2011    2011         125.00     210.00
EM    Benavides       hardback    282        11/30/2011    2011         130.00     220.00
K     Weman           paperback   280        11/30/2011    2011         69.00      115.00
H     Hocheng         hardback    488        11/30/2011    2011         155.00     265.00
SC    Ray             hardback    368        11/1/2011     2011         105.00     180.00
B     Purushothama    hardback    270        11/1/2011     2011         95.00      160.00
V     Ramesh Babu     hardback    200        11/1/2011     2011         95.00      160.00
J     Holah           hardback    824        10/26/2011    2011         195.00     330.00
M     Clark           hardback    680        10/25/2011    2011         175.00     300.00
M     Clark           hardback    336        10/25/2011    2011         135.00     230.00
C     Matthews        paperback   352        10/25/2011    2011         40.00      70.00
                      paperback   240        10/19/2011    2011         195.00     330.00
JP    Davim           hardback    412        10/18/2011    2011         135.00     230.00
P     Camanho         hardback    544        10/12/2011    2011         165.00     280.00
D     Landolt         hardback    584        10/12/2011    2011         165.00     280.00
G     Koster          hardback    296        10/5/2011     2011         130.00     220.00
PA    Capó-Lugo       hardback    438        10/4/2011     2011         145.00     245.00
GP    Russo           hardback    282        10/4/2011     2011         125.00     210.00
D     Manley          hardback    632        9/28/2011     2011         175.00     300.00
JE    Oakey           hardback    704        9/28/2011     2011         175.00     300.00
P     Boisse          hardback    704        9/28/2011     2011         175.00     300.00
MR    Khan            hardback    584        9/23/2011     2011         165.00     280.00
VS    Raja            hardback    816        9/22/2011     2011         190.00     325.00
E     Yahia           hardback    584        9/19/2011     2011         165.00     280.00
J     Yu              hardback    192        9/16/2011     2011         115.00     195.00
T     McNally         hardback    424        9/15/2011     2011         150.00     255.00
ASH   Makhlouf        hardback    448        9/14/2011     2011         150.00     255.00
RH    Gong            hardback    384        9/14/2011     2011         145.00     245.00
GO    Phillips        hardback    464        9/9/2011      2011         155.00     265.00
                      paperback   504        9/2/2011      2011         315.00     535.00
C-U   Kim             hardback    352        8/28/2011     2011         140.00     240.00
A     Basile          hardback    848        8/24/2011     2011         195.00     330.00

Y     Nys             hardback    632        8/19/2011 2011             160.00     270.00
F     Van Immerseel   hardback    448        8/19/2011 2011             155.00     265.00
V     Bartels         hardback    608        8/19/2011 2011             175.00     300.00
AP    Simopoulos      hardback    274        8/8/2011      2011         140.00     240.00
S     Vir             hardback               8/5/2011      2011         195.00
                                  2 volumes (vol 1: 646 pages, vol 2: 678 pages)   330.00
HO    Ylänen          hardback    288        7/26/2011 2011             125.00     210.00
B     Kinsey          hardback    240        7/26/2011 2011             125.00     210.00
BJ    McCarthy        hardback    240        7/26/2011 2011             130.00     220.00
MT    DeMeuse         hardback    288        7/18/2011 2011             135.00     230.00
Z     Cao             hardback    432        7/18/2011 2011             145.00     245.00
J     Hu              hardback    392        7/14/2011 2011             145.00     245.00
D     Benton          hardback    592        7/14/2011 2011             160.00     270.00
R     Wang            hardback    568        7/14/2011 2011             165.00     280.00
JP    Kerry           hardback    752        7/14/2011 2011             180.00     305.00
C     Lu              hardback    220        7/12/2011 2011             115.00     195.00
E     Yahia           hardback    568        6/30/2011 2011             165.00     280.00
E     Yahia           hardback    624        6/30/2011 2011             165.00     280.00
G     Giuliano        hardback 384        6/27/2011   2011   135.00   230.00
MI    Tobler-Rohr     hardback 520        6/27/2011   2011   155.00   265.00
E     Yahia           hardback 584        6/27/2011   2011   165.00   280.00
KR    Bhattacharya    hardback 608        6/27/2011   2011   160.00   270.00
D     Farrar          hardback 672        6/21/2011   2011   165.00   280.00
L     Bosworth        hardback 424        6/21/2011   2011   135.00   230.00
N     Pan             hardback 552        6/21/2011   2011   155.00   265.00
AL    Zhilyaev        hardback 328        5/31/2011   2011   135.00   230.00
M     Meloun                     CD-ROM
                      hardback + 800      5/31/2011   2011   155.00   265.00
Q     Xin             hardback 1088       5/26/2011   2011   225.00   380.00
P     Michaleris      hardback 316        5/25/2011   2011   130.00   220.00
MO    Alam            hardback 280        5/25/2011   2011   125.00   210.00
X     Zhao            hardback 288        5/25/2011   2011   125.00   210.00
Y     Li              hardback 420        5/9/2011    2011   145.00   245.00
H     Zhang           hardback 440        5/9/2011    2011   145.00   245.00
JM    Lagarón         hardback 736        5/9/2011    2011   175.00   300.00
                      paperback 676       5/5/2011    2011   350.00   595.00
K     Yamauchi        hardback 232        4/30/2011   2011   125.00   210.00
M     Saarela         hardback 672        4/30/2011   2011   165.00   280.00
R     Beith           hardback 560        4/30/2011   2011   160.00   270.00
CTF   Ross            hardback 488        4/30/2011   2011   150.00   255.00
SV    Lomov           hardback 552        4/19/2011   2011   155.00   265.00
G     Talbot          hardback 416        4/19/2011   2011   145.00   245.00
K     Macdonald       hardback 360        4/19/2011   2011   135.00   230.00
R     Fangueiro       hardback 400        4/19/2011   2011   145.00   245.00
A     Briggs-Goode    hardback 424        4/15/2011   2011   145.00   245.00
LJM   Rao             hardback 276        4/12/2011   2011   95.00    160.00
B     Purushothama    hardback 254        4/12/2011   2011   95.00    160.00
K     Kilcast         hardback 864        4/8/2011    2011   190.00   325.00
XG    Qiu             hardback 452        3/28/2011   2011   145.00   245.00
J     Ferri           hardback 400        3/28/2011   2011   140.00   240.00
T     McNally         hardback 848        3/28/2011   2011   180.00   305.00
GL    Song            hardback 656        3/25/2011   2011   160.00   270.00
SH    Whang           hardback 840        3/22/2011   2011   180.00   305.00
J     Hoorfar         hardback 384        3/15/2011   2011   135.00   230.00
KL    Nash            hardback 512        3/15/2011   2011   150.00   255.00

NE    Zafeiropoulos   hardback    416     2/26/2011   2011   145.00   245.00
Y     Shiraki         hardback    656     2/26/2011   2011   165.00   280.00
S     Rimmer          hardback    288     2/26/2011   2011   125.00   210.00
A     Muhammad        paperback   208     2/26/2011   2011   55.00    95.00
L     Zheng           hardback    400     2/26/2011   2011   145.00   245.00
KF    Au              hardback    346     2/26/2011   2011   135.00   230.00
D     Kilcast         hardback    264     2/16/2011   2011   125.00   210.00
RA    Clemens         hardback    220     2/15/2011   2011   140.00   240.00
S     De Saeger       hardback    456     2/7/2011    2011   145.00   245.00
JP    Davim           hardback    320     1/24/2011   2011   130.00   220.00
MI    Ojovan          hardback    512     1/24/2011   2011   155.00   265.00
B     Vernon          hardback    432     1/24/2011   2011   145.00   245.00
G     Song            hardback    496     1/20/2011   2011   150.00   255.00
H     Xu              hardback    360     1/14/2011   2011   135.00   230.00
W     Sha             hardback    304     1/1/2011    2011   125.00   210.00
KC      Molloy          paperback   232    12/21/2010   2011   35.00    60.00
VM      Karbhari        hardback    312    12/20/2010   2011   125.00   210.00
JD      Sørensen        hardback    628    12/20/2010   2011   160.00   270.00
M       Lysaght         hardback    320    12/20/2010   2011   135.00   230.00
Y       Baudoin         hardback    704    12/20/2010   2011   190.00   325.00
Robin   Dand            hardback    656    12/7/2010    2011   160.00   270.00
C       Lacroix         hardback    536    11/29/2010   2011   155.00   265.00

A       Majumdar        hardback    560    11/29/2010   2011   155.00   265.00
RM      Guedes          hardback    612    11/29/2010   2011   160.00   270.00
R       Williams        hardback    436    11/25/2010   2011   145.00   245.00
R       Luque           hardback    688    11/25/2010   2011   165.00   280.00
R       Lumley          hardback    864    11/25/2010   2011   190.00   325.00
S       Brul            hardback    640    11/23/2010   2011   160.00   270.00
B       Mazumder        hardback    140    10/29/2010   2010   85.00    145.00
SC      Tjong           hardback    952    10/29/2010   2010   210.00   355.00
T       Gourlay         hardback    400    10/28/2010   2010   145.00   245.00
SJ      Chua            hardback    352    10/28/2010   2010   145.00   245.00
L       Liu             hardback    422    10/28/2010   2010   155.00   265.00
CJ      Doona           hardback    560    10/28/2010   2010   170.00   290.00
S       Rizvi           hardback    698    10/28/2010   2010   175.00   300.00

Ph G    Tipping         hardback    944    10/26/2010   2010   210.00   355.00
C       Matthews        paperback   336    10/22/2010   2010   40.00    70.00
CM      McGregor        paperback   568    10/20/2010   2010   45.00    75.00
U       Sonesson        hardback    432    9/30/2010    2010   155.00   265.00
A       Reynolds        hardback    672    9/30/2010    2010   170.00   290.00
H       Rahnejat        hardback    1056   9/30/2010    2010   240.00   410.00
CA      Lawrence        hardback    464    9/27/2010    2010   155.00   265.00
K       Uchino          hardback    696    9/27/2010    2010   180.00   305.00
G       Pohl            hardback    524    9/27/2010    2010   160.00   270.00
E       Decker          hardback    432    9/27/2010    2010   155.00   265.00
ZZ      Fang            hardback    506    9/27/2010    2010   160.00   270.00
G       Colovic         hardback    212    9/27/2010    2010   95.00    160.00
E       Decker          hardback    552    9/22/2010    2010   160.00   270.00
ALW     Bradley         hardback    184    9/22/2010    2010   160.00   270.00
V       Nierstrasz      hardback    360    9/1/2010     2010   145.00   245.00
J-S     Zhang           hardback    384    9/1/2010     2010   145.00   245.00
ML      Gulrajani       hardback    432    8/31/2010    2010   155.00   265.00
CAC     Sequeira        hardback    632    8/30/2010    2010   170.00   290.00
SR      Jaeger          hardback    704    8/30/2010    2010   180.00   305.00
T-C     Hua             hardback    280    7/30/2010    2010   120.00   205.00
J       Ahn             hardback    792    7/27/2010    2010   190.00   325.00

JK      Kaldellis       hardback    576    7/27/2010    2010   165.00   280.00
AP      Vassilopoulos   hardback    576    7/27/2010    2010   165.00   280.00
J       Lawrence        hardback    848    7/27/2010    2010   190.00   325.00
C       Maierhofer      hardback    624    7/27/2010    2010   170.00   290.00
C       Butzke          hardback    432    7/19/2010    2010   145.00   245.00
X       Sun             hardback    336    7/15/2010    2010   145.00   245.00
SC      Anand           hardback    560    7/15/2010    2010   165.00   280.00
MM      Maroto-Valer    hardback    544    7/13/2010    2010   165.00   280.00
CP    Sharma          hardback   424   7/13/2010    2010   155.00   265.00
R     Alagirusamy     hardback   634   6/30/2010    2010   170.00   290.00
MM    Maroto-Valer    hardback   560   6/21/2010    2010   165.00   280.00
R     Chapman         hardback   224   6/15/2010    2010   120.00   205.00
C     Maierhofer      hardback   264   6/4/2010     2010   120.00   205.00
WW    Christie        hardback   446   6/1/2010     2010   145.00   245.00
KW    Waldron         hardback   496   5/24/2010    2010   165.00   280.00
D     Roddy           hardback   448   5/24/2010    2010   160.00   270.00
M     Sopicka-Lizer   hardback   440   5/24/2010    2010   155.00   265.00
D     Kilcast         hardback   400   5/24/2010    2010   145.00   245.00
H     Dong            hardback   680   5/24/2010    2010   170.00   290.00
C     Wrigley         hardback   552   5/20/2010    2010   165.00   280.00
N     Nijjawan        hardback   464   5/10/2010    2010   115.00   195.00
S     Das             hardback   244   5/10/2010    2010   85.00    145.00
B     Purushothama    hardback   168   5/10/2010    2010   95.00    160.00
AP    Simopoulos      hardback   180   5/3/2010     2010   135.00   230.00
A     Reynolds        hardback   624   4/28/2010    2010   170.00   290.00
LH    Skibsted        hardback   824   4/23/2010    2010   185.00   315.00
M     Hall            hardback   760   4/21/2010    2010   180.00   305.00
M     Griffiths       hardback   528   4/21/2010    2010   165.00   280.00
W     Wong            hardback   312   4/16/2010    2010   135.00   230.00
M     Griffiths       hardback   520   4/8/2010     2010   165.00   280.00
M     Niinomi         hardback   432   3/31/2010    2010   155.00   265.00
D     Dillard         hardback   656   3/31/2010    2010   170.00   290.00
N     Uddin           hardback   448   3/12/2010    2010   150.00   255.00
Xu    Wang            hardback   452   3/12/2010    2010   160.00   270.00
AA    Stec            hardback   728   3/12/2010    2010   180.00   305.00
BK    Behera          hardback   472   3/1/2010     2010   155.00   265.00
PK    Mallick         hardback   384   3/1/2010     2010   145.00   245.00
RS    Tomar           hardback   152   2/26/2010    2010   85.00    145.00
JCJ   Bart            hardback   864   2/19/2010    2010   190.00   325.00
PR    Lewis           hardback   496   2/18/2010    2010   165.00   280.00
A     Lucas           hardback   252   2/11/2010    2010   135.00   230.00
B     Koletzko        hardback   228   2/11/2010    2010   140.00   240.00
A     Das             hardback   250   1/30/2010    2010   95.00    160.00
WC    Smith           hardback   320   1/28/2010    2010   130.00   220.00
C     Mena            hardback   576   1/28/2010    2010   165.00   280.00
C     Archer          hardback   504   1/12/2010    2010   160.00   270.00
LW    Schwerzenbach   hardback   208   1/1/2010     2010   115.00   195.00
D     Lohwasser       hardback   436   12/18/2009   2010   155.00   265.00
TV    Chirila         hardback   560   12/18/2009   2010   165.00   280.00
V     Goodship        hardback   624   12/18/2009   2010   170.00   290.00
H     Zhao            hardback   756   12/18/2009   2010   180.00   305.00
J     Albert          hardback   184   12/18/2009   2010   120.00   205.00
A     Lewis           hardback   560   12/15/2009   2010   165.00   280.00
AP    Simopoulos      hardback   164   12/9/2009    2009   130.00   220.00
X     Chen            hardback   560   11/30/2009   2010   165.00   280.00
JN    Chakraborty     hardback   400   11/30/2009   2010   115.00   195.00
AM    Brandt          hardback   600   11/30/2009   2010   170.00   290.00
L     Ambrosio        hardback   648   11/23/2009   2010   170.00   290.00
KW    Waldron         hardback   680   10/26/2009   2009   180.00   305.00
W     Sha             hardback   216   10/26/2009   2009   130.00   220.00
N             Delatte              hardback    352    10/26/2009   2009   145.00   245.00
M             Corredig             hardback    712    10/26/2009   2009   180.00   305.00
H             Zhao                 hardback    324    10/26/2009   2009   145.00   245.00
SV            Petrushkin           hardback    236    10/26/2009   2009   120.00   205.00
S             Eichhorn             hardback    536    10/26/2009   2009   170.00   290.00
SE            Hughes               paperback   160    10/20/2009   2009   40.00    70.00
S             Eichhorn             hardback    528    10/19/2009   2009   170.00   290.00
RS            Blackburn            hardback    416    10/19/2009   2009   155.00   265.00
AR            Bunsell              hardback    696    10/19/2009   2009   180.00   305.00
F             Fahy                 paperback   136    10/15/2009   2009   20.00    35.00
Sir Patrick   Moore, CBE, DSc, FRAShardback    200    9/30/2009    2009   40.00    70.00
Sir Patrick   Moore, CBE, DSc, FRASpaperback   200    9/30/2009    2009   20.00    35.00
JT            Williams             hardback    432    9/29/2009    2009   155.00   265.00
ES            Greenhalgh           hardback    608    9/28/2009    2009   170.00   290.00
R             Lewis                hardback    856    9/25/2009    2009   210.00   355.00
T             Rowe                 hardback    304    9/25/2009    2009   145.00   245.00
I             Elmadfa              hardback    412    9/23/2009    2009   135.00   230.00
PM            Fratamico            hardback    600    9/22/2009    2009   170.00   290.00
RA            Behr                 hardback    272    9/14/2009    2009   130.00   220.00
S             Das                  hardback    200    9/8/2009     2009   95.00    160.00
B             Purushothama         hardback    416    9/8/2009     2009   115.00   195.00
P             Ashurst              hardback    208    8/26/2009    2009   130.00   220.00
Q             Wei                  hardback    352    8/26/2009    2009   145.00   245.00
JA            Planell              hardback    496    8/26/2009    2009   160.00   270.00
SP            Cauvain              hardback    252    8/26/2009    2009   145.00   245.00
P             Brandtzaeg           hardback    272    8/25/2009    2009   135.00   230.00
VM            Karbhari             hardback    552    8/25/2009    2009   165.00   280.00
AM            Robinson             hardback    128    8/20/2009    2009   120.00   205.00
AP            Simopoulos           hardback    126    8/12/2009    2009   90.00    155.00
DJ            McClements           hardback    744    7/30/2009    2009   180.00   305.00

K             Huang               hardback     340    7/30/2009    2009   145.00   245.00
G             Burnell             hardback     1232   7/30/2009    2009   240.00   410.00
MW            Lorence             hardback     408    7/30/2009    2009   160.00   270.00
S-Y           Fu                  hardback     364    7/6/2009     2009   150.00   255.00
C de W        Blackburn           hardback     1232   6/30/2009    2009   240.00   410.00
P             Wennström           paperback    146    6/30/2009    2009   40.50    65.00
FO            Olsen               hardback     336    6/26/2009    2009   145.00   245.00
G             Talbot              hardback     468    6/26/2009    2009   160.00   270.00

PJ            Fellows             paperback    928    6/22/2009    2009   50.00    85.00
JL            Provis              hardback     464    6/22/2009    2009   160.00   270.00
JF            Lancaster           hardback     144    6/22/2009    2009   120.00   205.00
F             Destaillats         hardback     440    6/1/2009     2009   145.00   245.00
J             Fan                 hardback     416    5/30/2009    2009   155.00   265.00
S             Rajasekaran         hardback     896    5/30/2009    2009   210.00   355.00
S             Thomas              hardback     752    5/30/2009    2009   190.00   325.00
GO            Phillips            hardback     948    5/28/2009    2009   225.00   380.00
C             Hellio              hardback     784    5/22/2009    2009   190.00   325.00
C             Matthews            paperback    232    5/22/2009    2009   40.00    70.00
S             Rajendran           hardback     360    4/30/2009    2009   145.00   245.00
D             Stirling            paperback    262    4/30/2009    2009   40.00    70.00
M        Wilson       hardback 568        4/29/2009    2009   165.00   280.00
J        Khatib       hardback 312        4/29/2009    2009   145.00   245.00
J        Denstedt     hardback 592        4/29/2009    2009   170.00   290.00
W        Sha          hardback 588        4/29/2009    2009   170.00   290.00
BW       Darvell      paperback 688       4/29/2009    2009   49.00    85.00
Edward   Maltby                  Free     4/27/2009
                      hardback + 712 CD-ROM            2009   210.00   355.00
T        Yoshikawa    hardback 224        4/27/2009    2009   115.00   195.00
M        Miraftab     hardback 264        4/21/2009    2009   120.00   205.00
RF       Hoskins      paperback 280       3/31/2009    2009   50.00    85.00
I        Shaw         hardback 608        3/31/2009    2009   170.00   290.00
M        Guo          hardback 368        3/30/2009    2009   145.00   245.00
HL       Meiselman    hardback 704        3/26/2009    2009   180.00   305.00
KK       Goswami      hardback 336        3/24/2009    2009   145.00   245.00
L        Susmel       hardback 588        3/20/2009    2009   170.00   290.00
SC       Kalhan       hardback 274        3/17/2009    2009   135.00   230.00
SY       Nanal        hardback 134        2/28/2009    2009   75.00    130.00
JW       Parchure     hardback 80         2/28/2009    2009   50.00    85.00
J        McCann       hardback 484        2/27/2009    2009   160.00   270.00
MM       Houck        hardback 396        1/30/2009    2009   155.00   265.00
P        Paquin       hardback 512        1/29/2009    2009   165.00   280.00
SE       Shumway      hardback 608        1/28/2009    2009   170.00   290.00
SCO      Ugbolue      hardback 428        1/28/2009    2009   155.00   265.00
DP       Orgill       hardback 256        1/28/2009    2009   130.00   220.00
JP       Kerry        hardback 680        1/22/2009    2009   185.00   315.00
S        Benavides    hardback 320        1/21/2009    2009   145.00   245.00
L        Di Silvio    hardback 648        12/22/2008   2009   185.00   315.00
NAG      Johnson      hardback 368        12/22/2008   2009   150.00   255.00
MM       Raats        hardback 652        12/17/2008   2009   190.00   325.00
R        Singh        hardback 576        12/12/2008   2009   170.00   290.00
Y        El Mogahzy   hardback 560        11/25/2008   2009   165.00   280.00
T        Yoneyama     hardback 352        11/21/2008   2009   150.00   255.00
M        Gasik        hardback 512        10/27/2008   2008   170.00   290.00
S        Sridharan    hardback 788        10/21/2008   2008   190.00   325.00
JK       Paik         hardback 552        10/20/2008   2008   170.00   290.00
R        Shishoo      hardback 384        10/20/2008   2008   150.00   255.00
S        Deb          hardback 424        10/16/2008   2008   160.00   270.00
N        Chand        hardback 220        10/14/2008   2008   135.00   230.00
JWS      Hearle       hardback 796        10/10/2008   2008   210.00   355.00
P        Schwartz     hardback 264        10/7/2008    2008   135.00   230.00
A        Abbott       hardback 244        9/30/2008    2008   130.00   220.00
G        Walker       hardback 600        9/30/2008    2008   170.00   290.00
FJ       Buchanan     hardback 424        9/26/2008    2008   155.00   265.00
M        Brown        hardback 688        9/24/2008    2008   185.00   315.00
M        Hirst        hardback 352        9/24/2008    2008   90.00    155.00
K-H      Park         hardback 312        9/23/2008    2008   150.00   255.00
AR       Horrocks     hardback 632        9/19/2008    2008   185.00   315.00
J        Hu           hardback 424        9/9/2008     2008   155.00   265.00
J        Hu           hardback 280        9/9/2008     2008   130.00   220.00

R        Martin       hardback 544       8/29/2008     2008   165.00   280.00
Ø        Lie          hardback 648       8/20/2008     2008   185.00   315.00
RL       Reis         hardback 832       8/15/2008     2008   200.00   340.00
AP    Simopoulos       hardback    260    8/12/2008   2008   135.00   230.00
DM    Bier             hardback    262    8/12/2008   2008   135.00   230.00
G     Talbot           hardback    220    8/1/2008    2008   98.00    165.00
T     Havlik           hardback    552    7/29/2008   2008   165.00   280.00
E     Chiellini        hardback    592    7/24/2008   2008   180.00   305.00
LC    Hollaway         hardback    416    7/18/2008   2008   155.00   265.00

AS    Khanna           hardback    472    7/9/2008    2008   160.00   270.00
PA    Revell           hardback    696    7/9/2008    2008   190.00   325.00
J     Klemeš           hardback    1056   6/30/2008   2008   240.00   410.00
K     Pickering        hardback    576    6/23/2008   2008   170.00   290.00
BL    Deopura          hardback    632    6/17/2008   2008   175.00   300.00
P     Richardson       hardback    432    6/13/2008   2008   160.00   270.00
S     Mindess          hardback    308    6/12/2008   2008   150.00   255.00
BS    Gupta            hardback    488    6/2/2008    2008   160.00   270.00
FD    Gunstone         hardback    216    6/1/2008    2008   125.00   210.00
B     Sirok            hardback    192    5/29/2008   2008   125.00   210.00
M     Schütze          hardback    648    5/29/2008   2008   180.00   305.00
KO    Niska            hardback    384    5/29/2008   2008   150.00   255.00
C     Fairhurst        hardback    328    5/28/2008   2008   145.00   245.00
E     Wilusz           hardback    384    5/21/2008   2008   150.00   255.00
R     Gilbert          paperback   192    5/20/2008   2008   40.00    70.00
T     Børresen         hardback    612    5/9/2008    2008   175.00   300.00
SO    Serna-Saldivar   hardback    440    4/30/2008   2008   125.00   210.00
M     Koç              hardback    412    4/25/2008   2008   155.00   265.00
E     Jeffs            hardback    216    4/24/2008   2008   130.00   220.00
FA    Tomás-Barberán   hardback    584    4/23/2008   2008   170.00   290.00
YM    Zhang            hardback    312    4/17/2008   2008   135.00   230.00
W     Gao              hardback    672    4/9/2008    2008   180.00   305.00
K     Jarmai           hardback    592    4/1/2008    2008   80.00    135.00
J     Farkas           hardback    328    4/1/2008    2008   80.00    135.00
S     Fairgrieve       paperback   128    4/1/2008    2008   85.00    145.00
P     Berry Ottaway    hardback    296    3/31/2008   2008   135.00   230.00
YN    Zhou             hardback    832    3/27/2008   2008   200.00   340.00
D     Alkazraji        paperback   176    3/26/2008   2008   40.00    70.00
RV    Curtis           hardback    528    3/25/2008   2008   170.00   290.00
T     Kokubo           hardback    784    3/25/2008   2008   195.00   330.00
S     Winnik           hardback    176    3/20/2008   2008   125.00   210.00
Z-G   Ye               hardback    1096   3/20/2008   2008   235.00   400.00
F     Abe              hardback    700    3/14/2008   2008   185.00   315.00
P     Jones            paperback   556    3/1/2008    2008   125.00   210.00
V     Zalizniak        paperback   212    3/1/2008    2008   60.00    100.00
B     Brückner         hardback    336    2/29/2008   2008   145.00   245.00
PC    Thijssen         paperback   132    2/28/2008   2008   55.00    95.00
DJP   Barker           hardback    266    2/6/2008    2008   135.00   230.00
L     Yang             hardback    712    2/1/2008    2008   185.00   315.00
ED    Yardley          hardback    200    2/1/2008    2008   135.00   230.00
K     Hack             hardback    488    1/25/2008   2008   160.00   270.00
N     Garti            hardback    496    1/25/2008   2008   160.00   270.00
N     Challis          paperback   288    1/1/2008    2008   40.00    70.00
                       paperback   186    1/1/2008    2008   25.00    40.00
J     Dunning-Davies   paperback   152    1/1/2008    2008   30.00    50.00
R         Whitefield       hardback 154        1/1/2008     2008   49.00    85.00
X         Mao              paperback 440       12/30/2007   2008   50.00    85.00
M         Earle            hardback 440        12/18/2007   2008   160.00   270.00
G         Akovali          paperback 310       12/1/2007    2007   95.00    160.00
BR        Hamaker          hardback 568        11/8/2007    2008   170.00   290.00
S         Fairgrieve       paperback 132       11/1/2007    2008   85.00    145.00
AMY       Razak                       Free     10/31/2007
                           hardback + 624 CD-ROM            2007   180.00   305.00
AR        Boccaccini       hardback 624        10/31/2007   2007   185.00   315.00
HLM       Lelieveld        hardback 384        10/25/2007   2007   160.00   270.00
P         Brown            hardback 544        10/17/2007   2007   170.00   290.00
R         Kotsilkova       paperback 326       10/1/2007    2007   95.00    160.00
MJ        Forrest          paperback 122       10/1/2007    2007   85.00    145.00
R         Rastall          hardback 336        9/21/2007    2007   145.00   245.00
VK        Champagne        hardback 376        9/21/2007    2007   155.00   265.00
A         Subic            hardback 376        9/5/2007     2007   155.00   265.00
DJ        McClements       hardback 792        8/30/2007    2007   200.00   340.00
Allan J   Organ            hardback 306        8/28/2007    2007   155.00   265.00
L         Fedrizzi         hardback 248        8/16/2007    2007   130.00   220.00
M         Jenkins          hardback 236        8/6/2007     2007   130.00   220.00
H         Zhao             hardback 544        8/2/2007     2007   180.00   305.00
D         Ratna            paperback 118       8/1/2007     2007   85.00    145.00
C         Haines           paperback 510       8/1/2007     2007   70.00    120.00
J         Cooper           hardback 544        7/26/2007    2007   170.00   290.00
L-E       Lindgren         hardback 248        7/25/2007    2007   130.00   220.00
VM        Karbhari         hardback 384        7/25/2007    2007   155.00   265.00
J         Harston          hardback 128        7/12/2007    2007   115.00   195.00
M         Schütze          hardback 296        7/10/2007    2007   145.00   245.00
SC        Roy              paperback 144       7/1/2007     2007   40.00    70.00
CL        Page             hardback 416        6/30/2007    2007   155.00   265.00
ES        Tai              hardback 248        6/30/2007    2007   150.00   255.00

H         MacFie           hardback    624    6/30/2007     2007   180.00   305.00
C         Agostoni         hardback    264    6/30/2007     2007   135.00   230.00
PLH       McSweeney        hardback    424    6/30/2007     2007   155.00   265.00
D         Féron            hardback    368    6/22/2007     2007   155.00   265.00
J         Dunning-Davies   paperback   256    6/15/2007     2007   40.00    70.00
H         Grabke           hardback    332    6/8/2007      2007   135.00   230.00
AJ        Taylor           hardback    296    6/8/2007      2007   145.00   245.00
RE        Moore            paperback   212    6/1/2007      2007   50.00    85.00
EN        Frankel          hardback    266    6/1/2007      2007   130.00   220.00
H         Breivik          hardback    296    6/1/2007      2007   130.00   220.00
MJM       Abadie           paperback   88     6/1/2007      2007   50.00    85.00
RJ        Cooke            hardback    236    6/1/2007      2007   135.00   230.00
H         Okuyama          hardback    168    6/1/2007      2007   135.00   230.00
M         Saarela          hardback    560    5/31/2007     2007   170.00   290.00
S         Prakash          hardback    544    5/31/2007     2007   170.00   290.00
ZX        Guo              hardback    312    5/31/2007     2007   155.00   265.00
D         Féron            hardback    220    5/17/2007     2007   130.00   220.00
R         Christie         hardback    256    5/11/2007     2007   145.00   245.00
CJK       Henry            hardback    376    4/30/2007     2007   155.00   265.00
B         Weimer           hardback    600    4/30/2007     2007   180.00   305.00
I         Kononenko        paperback   480    4/30/2007     2007   60.00    100.00
R-W   Bosch            hardback    240         4/30/2007    2007   130.00   220.00
J     Hu               hardback    360         4/30/2007    2007   150.00   255.00
J     Harston          paperback   56          4/18/2007    2007   60.00    100.00
S     Ashdown          hardback    408         4/11/2007    2007   155.00   265.00
T     Palmer           paperback   432         4/4/2007     2007   50.00    85.00
KW    Waldron          hardback    680         3/31/2007    2007   185.00   315.00
AY    Tamime           hardback    808         3/22/2007    2007   225.00   380.00
P     Dillmann         hardback    416         3/21/2007    2007   160.00   270.00
S     Brul             hardback    320         3/12/2007    2007   150.00   255.00
TR    Crompton         paperback   450         3/1/2007     2007   100.00   170.00
R     Oltra            hardback    208         2/21/2007    2007   130.00   220.00
R     Shishoo          hardback    360         2/21/2007    2007   155.00   265.00
L     Van Langenhove   hardback    336         2/21/2007    2007   155.00   265.00
E     Macdonald        hardback    664         2/21/2007    2007   210.00   355.00
NE    Shanmugam        hardback    508         2/14/2007    2007   165.00   280.00
D     Kilcast          hardback    384         2/14/2007    2007   155.00   265.00
M     Miraftab         hardback    208         1/30/2007    2007   130.00   220.00
AC    Long             hardback    344         1/30/2007    2007   155.00   265.00
                       paperback   17 papers   1/5/2007     2007   100.00   170.00
                       paperback   21 papers   1/1/2007     2007   100.00   170.00
AP    Simopoulos       hardback    236         1/1/2007     2007   135.00   230.00
V     Goodship         hardback    174         1/1/2007     2007   50.00    85.00
L     Frewer           hardback    696         12/22/2006   2007   185.00   315.00
K     Barnes           hardback    480         12/22/2006   2007   170.00   290.00
S     Gordon           hardback    568         12/22/2006   2007   175.00   300.00
S     Russell          hardback    544         12/22/2006   2007   175.00   300.00
RW    Sarsby           hardback    312         12/22/2006   2007   155.00   265.00
R     Lindstrom        paperback   48          11/30/2006   2007   60.00    100.00
R     Myrdal           paperback   40          11/30/2006   2007   60.00    100.00

G     Mead             hardback    364         11/30/2006   2007   155.00   265.00
M     Raupach          hardback    336         11/30/2006   2007   155.00   265.00
F     Shahidi          hardback    560         11/30/2006   2007   170.00   290.00
C     Mills            hardback    336         11/30/2006   2007   155.00   265.00
V     Coveney          hardback    248         10/30/2006   2006   135.00   230.00
N     Pan              hardback    632         10/30/2006   2006   175.00   300.00
D     Radaj            hardback    660         10/30/2006   2006   185.00   315.00
K     Skog             hardback    536         10/30/2006   2006   170.00   290.00
R     Alagirusamy      paperback   76          10/30/2006   2006   65.00    110.00
M     Potter           hardback    472         10/16/2006   2006   160.00   270.00
J     Norrish          hardback    304         10/11/2006   2006   145.00   245.00
G     Feiner           hardback    672         9/29/2006    2006   180.00   305.00
F     Gunstone         hardback    624         9/28/2006    2006   175.00   300.00
R     Bibb             hardback    312         9/28/2006    2006   145.00   245.00

E     Niemi            paperback   56          9/27/2006    2006   110.00   185.00
RA    Lawrie           paperback   464         9/25/2006    2006   60.00    100.00
TR    Gurney           hardback    464         8/25/2006    2006   170.00   290.00
KV    Peter            hardback    568         8/25/2006    2006   175.00   300.00
W     Yu               hardback    264         8/9/2006     2006   145.00   245.00
C     Bamforth         hardback    500         8/9/2006     2006   160.00   270.00
K     Cousins          paperback   120         8/1/2006     2006   300.00   510.00
H        Mattila      hardback 528         7/28/2006       2006   170.00   290.00
WJ       Spillane     hardback 448         7/17/2006       2006   155.00   265.00
D        Brewis       paperback 124        7/1/2006        2006   85.00    145.00
DE       Kritzinger   hardback 376         6/30/2006       2006   150.00   255.00
A        Bhatnagar    hardback 448         6/30/2006       2006   165.00   280.00
J-M      Vernaud      paperback 290        6/30/2006       2006   90.00    155.00
D        Platt        paperback 166        6/30/2006       2006   300.00   510.00
                                 208       6/12/2006
                      paperback + Free CD-ROM              2006   155.00   265.00
DA       Bender       hardback 552         6/9/2006        2006   85.00    145.00
M        Heinrich     hardback 186         6/1/2006        2006   135.00   230.00
J        Rigo         hardback 230         6/1/2006        2006   135.00   230.00
JP       Bantle       hardback 224         6/1/2006        2006   135.00   230.00
                      paperback 25 papers 6/1/2006         2006   100.00   170.00
                      paperback 20 papers 6/1/2006         2006   100.00   170.00
K        Larsson      hardback 280         6/1/2006        2006   130.00   220.00
A        Lucas        hardback 274         6/1/2006        2006   135.00   230.00
                                 Free
                      hardback + 376 CD-ROM5/31/2006       2006   155.00   265.00
Y        Motarjemi    hardback 656         5/30/2006       2006   180.00   305.00
BG       Mellor       hardback 448         5/30/2006       2006   160.00   270.00
K        Weman        hardback 320         4/30/2006       2006   150.00   255.00
NE       Shanmugam    hardback 508         4/28/2006       2006   170.00   290.00
J        Martin       paperback 256        4/28/2006       2006   50.00    85.00
H        Ujiie        hardback 384         4/28/2006       2006   160.00   270.00
Y        Li           hardback 428         4/28/2006       2006   165.00   280.00
H        Wu           hardback 376         4/26/2006       2006   155.00   265.00
Y        Li           hardback 408         4/24/2006       2006   160.00   270.00
Martin   Thompson     looseleaf 466        4/10/2006       2006   825.00   1400.00
                      paperback 24 papers 4/1/2006         2006   100.00   170.00
R        Crompton     paperback 704        3/30/2006       2006   110.00   185.00
M        Ferry        hardback 296         3/24/2006       2006   145.00   245.00
SP       Cauvain      hardback 192         3/24/2006       2006   130.00   220.00
C        Blackburn    hardback 736         3/21/2006       2006   190.00   325.00
Y        Wang         hardback 248         3/20/2006       2006   145.00   245.00
A        Voilley      hardback 320         3/8/2006        2006   155.00   265.00
I        Smith        hardback 272         3/8/2006        2006   145.00   245.00
JM       Blackledge   paperback 840        3/1/2006        2006   80.00    135.00

RHJ      Hannink      hardback    368         2/28/2006    2006   155.00   265.00
Y-W      Mai          hardback    608         2/28/2006    2006   185.00   315.00
                      paperback   16 Papers   2/1/2006     2006   100.00   170.00
V        Apte         hardback    480         1/31/2006    2006   170.00   290.00
J        Xin          hardback    248         1/31/2006    2006   145.00   245.00
H        Prashad      hardback    264         1/31/2006    2006   150.00   255.00
C        Williams     hardback    560         1/31/2006    2006   175.00   300.00
D        Fritz        hardback    340         1/30/2006    2006   115.00   195.00
IM       Low          hardback    632         1/25/2006    2006   195.00   330.00
S        Koppelman    hardback    428         1/23/2006    2006   160.00   270.00
K        Ding         hardback    172         1/16/2006    2006   135.00   230.00
NC       Lee          paperback   204         1/1/2006     2006   50.00    85.00
GT       Hahn         hardback    280         12/6/2005    2006   115.00   195.00
M        Miller       paperback   192         12/1/2005    2006   95.00    160.00
RS       Blackburn    hardback    464         11/30/2005   2006   165.00   280.00
SC      Anand         hardback 520         11/30/2005   2006   175.00   300.00
JM      Blackledge    paperback 824        11/30/2005   2006   80.00    135.00
PR      Beeley        hardback 264         10/31/2005   2005   130.00   220.00
H       Behery        hardback 496         10/31/2005   2005   165.00   280.00
HLM     Lelieveld     hardback 744         10/30/2005   2005   195.00   330.00
CC      Sorrell       hardback 428         10/30/2005   2005   165.00   280.00
RA      Scott         hardback 784         10/30/2005   2005   215.00   365.00
Terry   Townsend      looseleaf 510        10/30/2005   2005   670.00   1140.00
D       Mela          hardback 544         10/14/2005   2005   175.00   300.00
Z       Feng          hardback 364         10/10/2005   2005   160.00   270.00
S       Seetharaman   hardback 576         10/10/2005   2005   180.00   305.00
D       Bucknall      hardback 424         9/30/2005    2005   165.00   280.00
N       Ahmed         hardback 308         9/30/2005    2005   160.00   270.00
Q       Fan           hardback 336         9/28/2005    2005   155.00   265.00
L       Hench                   304
                      paperback + CD-ROM   9/27/2005    2005   50.00    85.00
G       Fu            hardback 288         9/20/2005    2005   150.00   255.00
P       Westbroek     hardback 356         8/30/2005    2005   150.00   255.00
C       Soutis        hardback 528         8/29/2005    2005   175.00   300.00
R       Shishoo       hardback 376         8/29/2005    2005   155.00   265.00
H       Yamagata      hardback 328         8/29/2005    2005   160.00   270.00
W       Jongen        hardback 656         8/29/2005    2005   185.00   315.00
G       Mead          hardback 576         8/8/2005     2005   180.00   305.00
MA      Hann          paperback 48         7/31/2005    2005   60.00    100.00
J       Sofos         hardback 808         7/30/2005    2005   195.00   330.00
AC      Long          hardback 492         7/30/2005    2005   165.00   280.00
M       Griffiths     hardback 624         7/30/2005    2005   180.00   305.00
H       Schubert      hardback 360         7/27/2005    2005   155.00   265.00
JF      Lancaster     hardback 288         7/22/2005    2005   130.00   220.00
P       Chen          hardback 712         7/22/2005    2005   210.00   355.00
D       Nichols       paperback 126        7/1/2005     2005   85.00    145.00
EN      Frankel       hardback 486         6/1/2005     2005   150.00   255.00
I       Elmadfa       hardback 174         6/1/2005     2005   135.00   230.00

G       Akovali       paperback   526      6/1/2005     2005   95.00    160.00
G       Hornstra      hardback    256      6/1/2005     2005   135.00   230.00
H       Lochs         hardback    256      6/1/2005     2005   135.00   230.00
O       Hernell       hardback    238      6/1/2005     2005   135.00   230.00
AP      Simopoulos    hardback    196      6/1/2005     2005   135.00   230.00
AP      Simopoulos    hardback    182      6/1/2005     2005   120.00   205.00

I       Elmadfa       hardback    224      6/1/2005     2005   135.00   230.00
W       Rogers        paperback   326      5/30/2005    2005   95.00    160.00
P       Vadgama       hardback    824      5/27/2005    2005   210.00   355.00
T       Hongu         hardback    312      5/25/2005    2005   155.00   265.00
Z       Xiao Guo      hardback    352      5/25/2005    2005   155.00   265.00
JF      Kennedy       hardback    352      5/6/2005     2005   175.00   300.00
R       Smith         hardback    552      5/6/2005     2005   170.00   290.00
                      paperback   214      5/1/2005     2005   100.00   170.00
XM      Tao           hardback    256      3/29/2005    2005   155.00   265.00
RR      Franck        hardback    432      3/28/2005    2005   165.00   280.00
GP      Beaumont      paperback   344      3/15/2005    2005   40.00    70.00
RD      Adams         hardback    560      3/8/2005     2005   170.00   290.00
EN       Gregory       paperback   72     2/28/2005    2005   80.00    135.00
G        Polaski       paperback   140    2/1/2005     2005   85.00    145.00
H        Böhni         hardback    264    1/20/2005    2005   145.00   245.00
SP       Cauvain       paperback   592    1/10/2005    2005   195.00   330.00

RF       Hoskins       paperback   306    1/1/2005     2005   55.00    95.00
C        Bastioli      paperback   534    1/1/2005     2005   110.00   185.00
DN       Burghes       paperback   400    12/1/2004    2005   50.00    85.00
JE       McIntyre      hardback    308    10/29/2004   2004   145.00   245.00
J        Hu            hardback    320    10/18/2004   2004   160.00   270.00
JD       Boon          paperback   224    10/12/2004   2004   50.00    85.00

                       paperback   226    10/1/2004    2004   100.00   170.00
DE       Briggs        hardback    900    9/28/2004    2004   225.00   380.00
J        Fan           hardback    260    9/20/2004    2004   145.00   245.00
C        Baillie       hardback    320    9/1/2004     2004   155.00   265.00
A        Arnoldi       hardback    504    8/26/2004    2004   175.00   300.00
D        Watson        hardback    704    8/19/2004    2004   185.00   315.00
WD       Schindler     hardback    224    8/10/2004    2004   145.00   245.00
A-C      Eliasson      hardback    624    8/1/2004     2004   180.00   305.00
N        Magan         hardback    488    7/16/2004    2004   170.00   290.00
P        Richardson    hardback    520    7/16/2004    2004   175.00   300.00
C        Farrar        hardback    208    7/15/2004    2004   130.00   220.00
Sergey   Gudoshnikov   hardback    336    7/1/2004     2004   155.00   265.00
C        Remacle       hardback    792    6/9/2004     2004   195.00   330.00
A        Nicolaou      hardback    294    6/1/2004     2004   130.00   220.00
JM       Pettifor      hardback    274    6/1/2004     2004   135.00   230.00
C        Hawkyard      paperback   396    6/1/2004     2004   110.00   185.00
E        Isoluri       hardback    324    6/1/2004     2004   135.00   230.00
SP       Allison       hardback    272    6/1/2004     2004   120.00   205.00
D        Dunn          paperback   138    6/1/2004     2004   85.00    145.00
LA       Utracki       paperback   786    6/1/2004     2004   100.00   170.00
                       paperback   160    6/1/2004     2004   100.00   170.00
G        Mead          hardback    400    6/1/2004     2004   160.00   270.00
L        Ye            hardback    1120   6/1/2004     2004   295.00   500.00

AP       Simopoulos    hardback    324    6/1/2004     2004   135.00   230.00
R        Steele        hardback    448    5/10/2004    2004   165.00   280.00
JS       Pinto         paperback   270    5/1/2004     2004   50.00    85.00
B        Raj           hardback    224    5/1/2004     2004   60.00    100.00
DA       Aldeen        paperback   288    5/1/2004     2004   70.00    120.00
LC       Hollaway      hardback    784    4/22/2004    2004   200.00   340.00
R        Yada          hardback    704    4/22/2004    2004   185.00   315.00
HA       McKenna       hardback    432    4/22/2004    2004   170.00   290.00
M        Edwards       hardback    328    4/22/2004    2004   150.00   255.00
D        Kilcast       hardback    560    4/14/2004    2004   175.00   300.00
KV       Peter         hardback    376    3/23/2004    2004   170.00   290.00
J        Innes         paperback   148    2/1/2004     2004   85.00    145.00
R        Wood          hardback    320    1/15/2004    2004   160.00   270.00
EG       Gilligan      hardback    140    1/5/2004     2004   135.00   230.00
H        McArthur      paperback   608    1/1/2004     2004   60.00    100.00
D        Keats         paperback   300    1/1/2004     2004   85.00    145.00
H          Ratschek           paperback   336   12/1/2003    2004   50.00     85.00
B          Harris             hardback    768   10/31/2003   2003   200.00    340.00
G          Lu                 hardback    424   10/31/2003   2003   170.00    290.00
P          Zeuthen            hardback    400   10/30/2003   2003   175.00    300.00
M          Lees               hardback    400   10/22/2003   2003   175.00    300.00
AM         Brandt             hardback    564   10/1/2003    2003   180.00    305.00
                              paperback   738   9/30/2003    2003   1050.00   1785.00
B          Mattsson           hardback    256   9/30/2003    2003   145.00    245.00
A          Cavaco-Paulo       hardback    240   8/31/2003    2003   160.00    270.00
E          Essien             hardback    104   8/31/2003    2003   110.00    185.00
SP         Cauvain            hardback    608   8/31/2003    2003   180.00    305.00
J          Bijen              hardback    280   8/31/2003    2003   150.00    255.00
I          Tothill            hardback    424   8/31/2003    2003   160.00    270.00
R          Tolley             hardback    740   8/29/2003    2003   180.00    305.00
P          Jiluan             hardback    624   7/30/2003    2003   185.00    315.00
G          Smit               hardback    536   7/29/2003    2003   175.00    300.00
James      Anderson           hardback    240   7/28/2003    2003   155.00    265.00
HLM        Lelieveld          hardback    408   7/25/2003    2003   165.00    280.00
P          Nieuwenhuis        hardback    272   7/25/2003    2003   150.00    255.00
M          Jenkins            hardback    424   7/23/2003    2003   165.00    280.00
PR         Lord               hardback    504   7/11/2003    2003   170.00    290.00
K          Weman              paperback   208   7/11/2003    2003   60.00     100.00
BM         McKenna            hardback    448   7/3/2003     2003   165.00    280.00
D          Heywood            hardback    544   7/1/2003     2003   150.00    255.00
SG         Sajjadi            paperback   250   7/1/2003     2003   70.00     120.00
G          De Barra           paperback   240   7/1/2003     2003   50.00     85.00
S          Roller             hardback    320   7/1/2003     2003   155.00    265.00
TA         McMeekin           hardback    384   6/23/2003    2003   160.00    270.00
R          Ahvenainen         hardback    400   6/10/2003    2003   175.00    300.00
K          Slater             hardback    240   6/9/2003     2003   150.00    255.00
AP         Simopoulos         hardback    138   6/1/2003     2003   135.00    230.00
SJ         Lamon              paperback   288   6/1/2003     2003   55.00     95.00
L          Cynober            hardback    308   6/1/2003     2003   135.00    230.00
RE         Timms              hardback    440   6/1/2003     2003   145.00    245.00
FD         Gunstone           hardback    320   6/1/2003     2003   135.00    230.00
FM         Delange            hardback    370   6/1/2003     2003   135.00    230.00
AP         Simopoulos         hardback    174   6/1/2003     2003   135.00    230.00
RO         Adlof              hardback    384   6/1/2003     2003   140.00    240.00
I          Johnson            hardback    400   5/12/2003    2003   155.00    265.00
T          Boekhout           hardback    512   5/7/2003     2003   160.00    270.00
Q-X        Ye                 hardback    342   5/1/2003     2003   55.00     95.00
Y          Li                 paperback   152   4/15/2003    2003   775.00    1320.00
Y          Li                 paperback   260   4/15/2003    2003   1050.00   1785.00
B          Baigrie            hardback    216   4/2/2003     2003   150.00    255.00
J          Dunning-Davies     paperback   416   3/1/2003     2003   50.00     85.00
T          Mattila-Sandholm   hardback    416   2/24/2003    2003   165.00    280.00
S          Buckingham         hardback    264   2/17/2003    2003   150.00    255.00
D          Watson             hardback    216   2/3/2003     2003   150.00    255.00
Jennifer   Spencer            looseleaf   208   1/14/2003    2003   450.00    765.00
JK         Skelly             hardback    256   1/1/2003     2003   110.00    185.00
LWC        Miles              hardback    352   1/1/2003     2003   65.00     110.00
PW         Dufton             paperback   148   1/1/2003     2003   300.00    510.00
D         Radaj        hardback    416        1/1/2003      2003         125.00     210.00
DK        Smith        hardback    204        1/1/2003      2003         50.00      85.00
JD        Renton       paperback   212        12/30/2002 2003            70.00      120.00
TJ        Mason        paperback   166        11/1/2002 2003             50.00      85.00
Junichi   Ujiie        hardback    496        10/31/2002 2002            160.00     270.00
A         Clarke       hardback    456        10/29/2002 2002            180.00     305.00
HS        Khatak       hardback    400        10/14/2002 2002            150.00     255.00
RH        Gong         hardback    172        10/11/2002 2002            150.00     255.00
JF        Kennedy      hardback               10/4/2002 2002             445.00
                                   2 volumes (vol 1: 600 pages, vol 2: 552 pages)   755.00

D         Brown        paperback   266        10/1/2002     2002         70.00      120.00
SC        Siekierski   paperback   208        10/1/2002     2002         30.00      50.00
M         Brown        hardback    320        9/26/2002     2002         155.00     265.00
G         Mathers      hardback    248        9/24/2002     2002         135.00     230.00
BJ        Elliott      hardback    336        9/20/2002     2002         115.00     195.00
H         McClintock   hardback    344        9/17/2002     2002         155.00     265.00
JP        Kerry        hardback    480        9/6/2002      2002         170.00     290.00
WR        Spillers     hardback    256        9/1/2002      2002         50.00      85.00
JM        Blackledge   paperback   244        9/1/2002      2002         55.00      95.00
D         MacDougall   hardback    392        8/16/2002     2002         160.00     270.00
CJK       Henry        hardback    504        8/16/2002     2002         175.00     300.00
W         Jongen       hardback    408        8/13/2002     2002         165.00     280.00
T         Ohlsson      hardback    304        7/26/2002     2002         150.00     255.00
HA        Bremner      hardback    520        7/25/2002     2002         165.00     280.00
John      Jessop       looseleaf   240        7/24/2002     2002         495.00     840.00
HJS       Finch        paperback   528        6/5/2002      2002         50.00      85.00
G         Crawshaw     hardback    400        6/1/2002      2002         120.00     205.00
H-K       Rouette      hardback    396        6/1/2002      2002         90.00      155.00
D         Labadarios   hardback    316        6/1/2002      2002         135.00     230.00
WS        Simpson      hardback    384        5/9/2002      2002         160.00     270.00
W         Fung         hardback    416        5/9/2002      2002         160.00     270.00
A         Menlove      hardback    246        5/1/2002      2002         85.00      145.00
KC        Mills        hardback    234        4/22/2002     2002         620.00     1055.00
SJ        James        hardback    360        4/19/2002     2002         165.00     280.00
S         Page         paperback   480        4/1/2002      2002         40.00      70.00
DH        Rouvray      hardback    400        4/1/2002      2002         80.00      135.00
J         Blunt        hardback    272        3/28/2002     2002         145.00     245.00
Nnamdi    Anyadike     paperback   168        3/15/2002     2002         495.00     840.00
Nnamdi    Anyadike     paperback   158        3/15/2002     2002         495.00     840.00
Nnamdi    Anyadike     paperback   146        3/15/2002     2002         495.00     840.00
Nnamdi    Anyadike     paperback   166        3/15/2002     2002         495.00     840.00
JH        Mason        paperback   230        3/1/2002      2002         40.00      70.00
JD        Renton       paperback   416        3/1/2002      2002         80.00      135.00
V         Valpuesta    hardback    352        3/1/2002      2002         155.00     265.00
D         Martin       paperback   424        3/1/2002      2002         55.00      95.00
RR        White        hardback    256        2/22/2002     2002         150.00     255.00
D         Watson       hardback    324        2/22/2002     2002         165.00     280.00
RR        Scorer       paperback   160        2/1/2002      2002         50.00      85.00
AM        Seyam        paperback   36         1/1/2002      2002         25.00      40.00
G         Stolte       hardback    216        1/1/2002      2002         60.00      100.00
DB        Wootton      hardback    248        1/1/2002      2002         110.00     185.00
J         Shore        hardback    480        1/1/2002      2002         115.00     195.00
RP          Brown          hardback    180    1/1/2002     2002   185.00   315.00
J           Shore          hardback    480    1/1/2002     2002   115.00   195.00
A           Barella        paperback   42     1/1/2002     2002   25.00    40.00
B           Le Pechoux     paperback   60     1/1/2002     2002   25.00    40.00
AJ          Chuter         hardback    324    1/1/2002     2002   50.00    85.00
MJ          Denton         hardback    408    1/1/2002     2002   50.00    85.00
R           Lowson         hardback    244    1/1/2002     2002   85.00    145.00
WA          Gould          hardback    452    11/1/2001    2002   130.00   220.00
Joseph      Guenthner      hardback    312    11/1/2001    2002   155.00   265.00
DH          Trevena        paperback   160    11/1/2001    2002   30.00    50.00
JF          Matos          hardback    432    11/1/2001    2002   55.00    95.00
JF          Kennedy        hardback    352    10/31/2001   2001   175.00   300.00
RR          Franck         hardback    264    10/29/2001   2001   165.00   280.00
JF          Kennedy        hardback    448    10/26/2001   2001   190.00   325.00
JWS         Hearle         hardback    344    10/26/2001   2001   155.00   265.00
JWS         Hearle         hardback    320    10/9/2001    2001   170.00   290.00
XM          Tao            hardback    336    10/4/2001    2001   160.00   270.00
E           Kress-Rogers   hardback    872    10/3/2001    2001   210.00   355.00
J           Wilson         paperback   160    9/21/2001    2001   75.00    130.00
M           Earle          paperback   392    9/18/2001    2001   50.00    85.00
P           Vistrup        hardback    472    9/1/2001     2001   85.00    145.00
KV          Peter          hardback    336    8/17/2001    2001   170.00   290.00
DR          Moore          hardback    352    8/10/2001    2001   155.00   265.00
D-W         Sun            hardback    496    8/1/2001     2001   100.00   170.00
Tim         Peck           hardback    344    7/31/2001    2001   150.00   255.00
David       Long           looseleaf   600    7/20/2001    2003   825.00   1400.00
Bob         Ceurstemont    looseleaf   406    7/20/2001    2001   775.00   1320.00
M           Dillon         hardback    232    7/12/2001    2001   150.00   255.00
Thomas      Krayenbuehl    paperback   216    7/3/2001     2001   335.00   570.00
John        Smullen        paperback   160    7/3/2001     2001   660.00   1120.00
John        MacNamara      paperback   194    7/3/2001     2001   335.00   570.00
R           Guy            hardback    216    6/25/2001    2001   150.00   255.00
Vincent     Rich           looseleaf   314    6/22/2001    2001   440.00   750.00
K           Goodburn       hardback    256    6/14/2001    2001   150.00   255.00
LMM         Tijskens       hardback    512    6/14/2001    2001   175.00   300.00
PA          Firby          hardback    270    6/1/2001     2001   50.00    85.00
H-K         Rouette        hardback    2766   6/1/2001     2001   795.00   1350.00
D           Hornig         hardback    214    6/1/2001     2001   135.00   230.00
John        Wakely         hardback    192    5/25/2001    2001   145.00   245.00
T           Mayes          hardback    304    5/17/2001    2001   155.00   265.00
PT          Houldcroft     hardback    240    5/11/2001    2001   130.00   220.00
D           Watson         hardback    336    5/2/2001     2001   165.00   280.00
C           Woodings       hardback    352    4/30/2001    2001   155.00   265.00
Ian         Walden         looseleaf   686    4/27/2001    2001   525.00   890.00
DJ          Spencer        paperback   416    4/27/2001    2001   55.00    95.00
JB          Rossell        hardback    382    4/25/2001    2001   165.00   280.00
P           Richardson     hardback    312    4/24/2001    2001   155.00   265.00
SP          Cauvain        hardback    304    4/23/2001    2001   150.00   255.00
D           Pletcher       paperback   442    4/1/2001     2001   60.00    100.00
Murray      Park           looseleaf   232    3/30/2001    2001   450.00   765.00
Anthony N   Birts          hardback    192    3/20/2001    2001   110.00   185.00
G           Owens          hardback    248    3/20/2001    2001   150.00   255.00
J          Pokorný       hardback 400      3/20/2001    2001   155.00   265.00
SC         Anand         hardback 256      2/28/2001    2001   150.00   255.00

James      King          looseleaf   340   2/23/2001    2001   450.00   765.00
AR         Horrocks      hardback    448   2/16/2001    2001   165.00   280.00
D          Manley        hardback    208   1/29/2001    2001   155.00   265.00
R          Killing       hardback    200   1/1/2001     2001   95.00    160.00
AD         Broadbent     hardback    592   1/1/2001     2001   65.00    110.00
D          Frenkler      hardback    360   1/1/2001     2001   125.00   210.00
PD         Barry         hardback    256   1/1/2001     2001   50.00    85.00
G          Akovali       hardback    196   1/1/2001     2001   95.00    160.00
JO         Ukponmwan     paperback   94    1/1/2001     2001   50.00    85.00
NR         Mandal        hardback    160   1/1/2001     2001   115.00   195.00
AJ         Jones         paperback   300   12/1/2000    2001   55.00    95.00
W          Fung          hardback    384   11/28/2000   2001   160.00   270.00
J          Hicks         hardback    160   10/31/2000   2000   90.00    155.00
AR         Horrocks      hardback    576   10/31/2000   2000   200.00   340.00
FL         Matthews      hardback    224   10/27/2000   2000   150.00   255.00
JM         Hodgkinson    hardback    384   10/27/2000   2000   155.00   265.00
CE         Horne         hardback    256   10/23/2000   2000   150.00   255.00
SR         Reid          hardback    320   10/12/2000   2000   155.00   265.00
IT         Johnson       hardback    438   9/28/2000    2000   175.00   300.00
Pierre     Spahni        hardback    416   9/27/2000    2000   155.00   265.00
BJ         Elliott       hardback    320   9/27/2000    2000   115.00   195.00
M          Brown         hardback    344   9/22/2000    2000   160.00   270.00
Ken        Hewitt        looseleaf   218   9/19/2000    2000   450.00   765.00
AG         Gibson        paperback   656   9/11/2000    2000   195.00   330.00

CR         Calladine     paperback   328   9/1/2000     2000   80.00    135.00
D          Kilcast       hardback    352   8/24/2000    2000   160.00   270.00
T          Dean          hardback    240   8/11/2000    2000   150.00   255.00
Charles    Kernot        looseleaf   320   7/31/2000    2000   440.00   750.00
PC         Morris        hardback    264   7/26/2000    2000   150.00   255.00
JR         Blanchfield   hardback    320   7/25/2000    2000   155.00   265.00
T          Starr         hardback    336   7/25/2000    2000   155.00   265.00
CJ         Kennedy       hardback    304   6/27/2000    2000   150.00   255.00
MJ         Owen          hardback    416   6/19/2000    2000   160.00   270.00
Nick       Antill        hardback    300   6/19/2000    2000   165.00   280.00

Karen      Beynon        hardback 192      6/19/2000    2000   160.00   270.00

Nick       Hall          looseleaf   610   6/2/2000     2000   450.00   765.00
Tom        Bolton        looseleaf   350   5/31/2000    2000   545.00   925.00
FD         Gunstone      hardback    250   5/30/2000    2000   50.00    85.00
Jonathan   Kingsman      looseleaf   754   5/26/2000    2008   825.00   1400.00
X-L        Zhao          paperback   96    5/8/2000     2000   150.00   255.00
William    Black         looseleaf   240   5/8/2000     2000   495.00   840.00
J          Nixon         hardback    128   4/28/2000    2000   100.00   170.00
PA         Williams      hardback    470   4/28/2000    2000   180.00   305.00
Alan       Hicks         hardback    352   3/29/2000    2000   155.00   265.00
RW         Hay           paperback   176   3/1/2000     2000   40.00    70.00
R          Boekholt      hardback    224   2/11/2000    2000   150.00   255.00
                       paperback   124    1/18/2000    2000   150.00   255.00
                       paperback   160    1/18/2000    2000   150.00   255.00
                       paperback   158    1/18/2000    2000   150.00   255.00
                       paperback   166    1/18/2000    2000   150.00   255.00
                       paperback   210    1/18/2000    2000   150.00   255.00
                       paperback   208    1/18/2000    2000   150.00   255.00
                       paperback   108    1/18/2000    2000   150.00   255.00
B         Raj          hardback    260    1/1/2000     2000   50.00    85.00
JR        Wünsch       paperback   176    1/1/2000     2000   80.00    135.00
S         Hulse        paperback   138    1/1/2000     2000   255.00   435.00
                       paperback   108    1/1/2000     2000   35.00    60.00
EA        Ghabbour     hardback    352    1/1/2000     2000   155.00   265.00
                       paperback   466    12/13/1999   2000   195.00   330.00
A         Hunter       hardback    224    12/1/1999    1999   90.00    155.00
MA        Malati       paperback   376    10/30/1999   1999   60.00    100.00
S         Thompson     hardback    224    10/15/1999   1999   155.00   265.00
CTF       Ross         paperback   480    10/3/1999    1999   50.00    85.00
HSM       Zedan        hardback    208    10/1/1999    1999   50.00    85.00
J         Burgess      paperback   232    10/1/1999    1999   40.00    70.00
MH        Ogle         paperback   516    9/30/1999    1999   215.00   365.00
J         Hicks        paperback   160    9/30/1999    1999   60.00    100.00
RJ        Wise         paperback   104    9/30/1999    1999   150.00   255.00
G         Linden       hardback    384    9/24/1999    1999   165.00   280.00
G         Verhaeghe    paperback   102    9/7/1999     1999   150.00   255.00
Phil      Case         hardback    304    8/26/1999    1999   155.00   265.00
R         Lambourne    hardback    800    8/23/1999    1999   200.00   340.00
A         Reid         hardback    176    8/9/1999     1999   30.00    50.00
Julia     Prichard     hardback    224    8/9/1999     1999   155.00   265.00
A         Miravete     hardback    336    8/9/1999     1999   155.00   265.00
B         Bedenik      hardback    392    8/1/1999     1999   50.00    85.00
FL        Matthews     paperback   480    7/16/1999    1999   50.00    85.00
WA        Gould        hardback    290    7/1/1999     1999   120.00   205.00
Charles   Kernot       hardback    256    6/4/1999     1999   165.00   280.00

Ian       Youngman     hardback 256       6/4/1999     1999   145.00   245.00
M         Ladd         paperback 192      6/1/1999     1999   50.00    85.00
WS        Weiglhofer   paperback 216      6/1/1999     1999   35.00    60.00

MI        Gurr         hardback    224    6/1/1999     1999   85.00    145.00
MR        Wright       hardback    310    6/1/1999     1999   40.00    70.00
JF        Lancaster    paperback   464    5/25/1999    1999   60.00    100.00
Bernard   Taylor       paperback   224    5/20/1999    1999   55.00    95.00
Rohit     Talwar       paperback   256    5/20/1999    1999   55.00    95.00
Vlad      Stanic       paperback   192    5/20/1999    1999   55.00    95.00
VS        Davey        paperback   84     5/15/1999    1999   135.00   230.00
R         Hurrell      hardback    320    5/1/1999     1999   85.00    145.00
PS        Belton       hardback    304    4/1/1999     1999   145.00   245.00
Brian     Welch        hardback    304    3/26/1999    1999   110.00   185.00
                       hardback    1000   3/12/1999    1999   160.00   270.00
LC        Hollaway     hardback    352    3/5/1999     1999   155.00   265.00

J         Ziebs        paperback 342      2/19/1999    1999   175.00   300.00
Bill        Brown          hardback    352   2/5/1999     1999   150.00   255.00
M           Hagg           hardback    378   2/1/1999     1999   170.00   290.00
BP          Saville        hardback    336   1/8/1999     1999   150.00   255.00
Valerie     Hawkes         hardback    192   1/8/1999     1999   110.00   185.00
JHP         Tyman          hardback    156   1/1/1999     1999   145.00   245.00
JT          Kumpulainen    hardback    466   1/1/1999     1999   175.00   300.00
                           paperback   238   1/1/1999     1999   175.00   300.00
DR          Karsa          hardback    286   1/1/1999     1999   150.00   255.00
EA          Ghabbour       hardback    302   1/1/1999     1999   155.00   265.00
A           Basu           paperback   40    1/1/1999     1999   20.00    35.00
WS          Wilson         hardback    348   1/1/1999     1999   155.00   265.00
L           Vangheluwe     paperback   64    1/1/1999     1999   20.00    35.00
                           paperback   632   1/1/1999     1999   35.00    60.00
JP          Blitz          hardback    400   1/1/1999     1999   170.00   290.00
P           Grosberg       paperback   210   1/1/1999     1999   65.00    110.00
L           Zhang          paperback   114   1/1/1999     1999   25.00    40.00
                           paperback   556   1/1/1999     1999   45.00    75.00
M           Fielding       hardback    228   1/1/1999     1999   145.00   245.00
S           Mukhopadhyay   paperback   128   1/1/1999     1999   40.00    70.00
GT          Brooks         hardback    438   1/1/1999     1999   170.00   290.00
AR          Horrocks       paperback   316   11/17/1998   1999   170.00   290.00
Paddy       Crabbe         hardback    400   11/12/1998   1999   105.00   180.00
G           Pritchard      hardback    384   11/10/1998   1999   160.00   270.00
Julian      Roche          hardback    288   11/3/1998    1999   155.00   265.00
UW          Kitzinger      hardback    290   11/1/1998    1999   70.00    120.00
Alexander   Reed           hardback    320   10/5/1998    1998   130.00   220.00
SA          Campbell       hardback    230   10/1/1998    1998   150.00   255.00
SM          Bozic          hardback    256   10/1/1998    1998   50.00    85.00
                           paperback   332   9/25/1998    1998   210.00   355.00
Sally       Clubley        hardback    160   9/14/1998    1998   75.00    130.00
M           Ladd           paperback   432   9/1/1998     1998   50.00    85.00
D           Luo            hardback    256   9/1/1998     1998   60.00    100.00
CTF         Ross           hardback    480   9/1/1998     1998   50.00    85.00
Fred        Wellings       paperback   224   8/24/1998    1998   75.00    130.00
S           Grainger       hardback    336   8/24/1998    1998   155.00   265.00
                           paperback   118   7/29/1998    1998   135.00   230.00
JWS         Hearle         hardback    468   7/14/1998    1998   390.00   665.00
J           Summerscales   hardback    336   7/10/1998    1998   155.00   265.00
Ian         Youngman       hardback    224   7/3/1998     1998   145.00   245.00
PA          Williams       hardback    434   7/1/1998     1998   180.00   305.00
Alan        Hicks          hardback    560   5/29/1998    1998   170.00   290.00
M           Greensmith     hardback    288   4/14/1998    1998   145.00   245.00
J           O'Brien        hardback    480   4/1/1998     1998   170.00   290.00
                           paperback   384   4/1/1998     1998   170.00   290.00
Tom         Bolton         hardback    192   3/23/1998    1998   150.00   255.00
D           Manley         paperback   96    3/10/1998    1998   40.00    70.00
D           Manley         paperback   96    3/10/1998    1998   40.00    70.00
D           Manley         paperback   88    3/10/1998    1998   40.00    70.00
D           Manley         paperback   88    3/10/1998    1998   40.00    70.00
D           Manley         paperback   80    3/10/1998    1998   40.00    70.00
D           Manley         paperback   104   3/10/1998    1998   40.00    70.00
François    Perquel        hardback    160   1/9/1998     1998   145.00   245.00
W          Klein          paperback   48         1/1/1998     1998   20.00    35.00
TP         Labuza         hardback    458        1/1/1998     1998   170.00   290.00
DK         Wilson         paperback   40         1/1/1998     1998   20.00    35.00
WP         Gardiner       paperback   416        1/1/1998     1998   55.00    95.00
Pierre     Spahni         paperback   192        1/1/1998     1998   145.00   245.00
RM         Laing          hardback    148        1/1/1998     1998   35.00    60.00
DM         Sigmon         paperback   58         1/1/1998     1998   20.00    35.00
JO         Ukponmwan      paperback   60         1/1/1998     1998   20.00    35.00
NA         Shneydor       paperback   266        1/1/1998     1998   60.00    100.00
J          Shore          hardback    236        1/1/1998     1998   50.00    85.00
CAC        Sequeira       hardback    550        1/1/1998     1998   180.00   305.00
                          paperback   118        1/1/1998     1998   35.00    60.00
AW         Espie          paperback              1/1/1998
                                      176 pages + disk        1998   135.00   230.00
EA         Ghabbour       hardback    272        1/1/1998     1998   150.00   255.00
M          Le Bras        hardback    466        1/1/1998     1998   170.00   290.00
NS         Isaacs         hardback    514        1/1/1998     1998   170.00   290.00
AO         Scott          hardback    200        1/1/1998     1998   145.00   245.00
T          Matsuo         paperback   92         1/1/1998     1998   20.00    35.00
JE         Whitehouse     hardback    200        12/30/1997   1998   40.00    70.00
Vaumini    Amin           hardback    320        12/5/1997    1998   145.00   245.00

Lucy       Weldon         hardback    224       11/26/1997    1998   145.00   245.00
Graham     Roberts        hardback    360       11/26/1997    1998   150.00   255.00
TD         Papthanasiou   hardback    384       10/21/1997    1997   155.00   265.00
R          Gunn           hardback    216       10/21/1997    1997   150.00   255.00
Peter      Groves         hardback    256       10/9/1997     1997   145.00   245.00
J          Barrett        paperback   320       10/1/1997     1997   40.00    70.00
Philippa   Foster Back    hardback    208       9/26/1997     1997   75.00    130.00
Lance      Moir           paperback   208       9/23/1997     1997   75.00    130.00
Donald     Spence         hardback    216       8/27/1997     1997   45.00    75.00
JF         Lancaster      paperback   448       8/7/1997      1997   60.00    100.00

GM         Evans          hardback    448       7/29/1997     1997   185.00   315.00
RS         Singhal        hardback    560       7/17/1997     1997   175.00   300.00
TR         Gurney         paperback   222       7/7/1997      1997   175.00   300.00
Eddie      Cade           hardback    256       6/24/1997     1997   145.00   245.00
WW         Christie       hardback    296       6/1/1997      1997   85.00    145.00
FP         Davidson       hardback    210       6/1/1997      1997   70.00    120.00
CTF        Ross           paperback   320       6/1/1997      1997   40.00    70.00
RM         Johnson        paperback   176       6/1/1997      1997   40.00    70.00
WA         Gould          hardback    128       6/1/1997      1997   50.00    85.00
MJ         Chapman        paperback   310       6/1/1997      1997   50.00    85.00
G          Scott          hardback    348       5/1/1997      1997   70.00    120.00
R          McDonald       hardback    534       3/1/1997      1997   65.00    110.00
A          Dyer           hardback    510       2/1/1997      1997   180.00   305.00
H          Beyer          paperback   1066      2/1/1997      1997   80.00    135.00
E          Dickinson      hardback    418       1/1/1997      1997   170.00   290.00
T          Hongu          hardback    224       1/1/1997      1997   150.00   255.00
MHB        Hayes          hardback    506       1/1/1997      1997   175.00   300.00
CD         Rudd           hardback    304       1/1/1997      1997   150.00   255.00

AD         Swift          hardback 242          1/1/1997      1997   155.00   265.00
Gerald     Leahy          hardback 160        1/1/1997   1997        75.00      130.00
AJ         Taylor         hardback 476        1/1/1997   1997        180.00     305.00
JH         Duffus         hardback 296        1/1/1997   1997        150.00     255.00
R          Halmshaw       hardback 128        1/1/1997   1997        130.00     220.00
AG         Maddock        paperback 272       1/1/1997   1997        55.00      95.00
                          paperback 70        1/1/1997   1997        35.00      60.00
A          Hobbacher      paperback 128       10/31/1996 1996        135.00     230.00
D          Croft          hardback 128        10/31/1996 1996        130.00     220.00
SK         De             hardback 272        10/31/1996 1996        150.00     255.00
James      Lynch          hardback 240        7/31/1996 1996         75.00      130.00
Chris      Thorpe         hardback 272        7/31/1996 1996         75.00      130.00
DL         Downing        hardback 512        6/1/1996   1996        160.00     270.00
DL         Downing                            560 pages, 1996        pages,     635.00
                          hardback (Volume 1: 6/1/1996 Volume 2: 512 375.00 Volume 3: 624 pages)
D          Watson         hardback 88         6/1/1996   1996        40.00      70.00
WW         Christie       hardback 376        6/1/1996   1996        85.00      145.00
DL         Downing        hardback 560        6/1/1996   1996        160.00     270.00
DL         Downing        hardback 624        6/1/1996   1996        160.00     270.00
R          Boekholt       paperback 352       5/31/1996 1996         145.00     245.00
                          hardback 816        5/31/1996 1996         60.00      100.00
Peter      Eales          hardback 224        5/31/1996 1996         70.00      120.00
                          paperback 328       4/30/1996 1996         150.00     255.00
TH         Stewart        hardback 224        2/28/1996 1996         75.00      130.00
William    Bain           paperback 224       2/28/1996 1996         75.00      130.00
JS         Burnell-Gray   hardback 352        1/30/1996 1996         155.00     265.00
AR         Horrocks       paperback 192       1/1/1996   1996        150.00     255.00
JF         Kennedy        hardback 448        1/1/1996   1996        170.00     290.00
Tony       Hannah         hardback 256        1/1/1996   1996        145.00     245.00
I          Hardwick       paperback 264       1/1/1996   1996        30.00      50.00
VM         Wilkinson      hardback 180        1/1/1996   1996        145.00     245.00
CTF        Ross           paperback 220       1/1/1996   1996        50.00      85.00
AS         Grandison      hardback 304        1/1/1996   1996        155.00     265.00
A          Miravete       spiralbound256      1/1/1996   1996        195.00     330.00
JT         Kumpulainen    hardback 450        1/1/1996   1996        180.00     305.00
JD         Schofield      hardback 402        1/1/1996   1996        165.00     280.00
CTF        Ross           hardback 624        1/1/1996   1996        60.00      100.00
CS         Wiesner        paperback 70        11/30/1995 1996        130.00     220.00
John       Smullen        hardback 224        10/31/1995 1995        145.00     245.00
Julian     Roche          hardback 208        9/30/1995 1995         145.00     245.00
JF         Kennedy        hardback 608        9/30/1995 1995         175.00     300.00

Julian     Roche          hardback    240     7/31/1995    1995       150.00    255.00
H-K        Rouette        hardback    2766    7/1/1995     1995       235.00    400.00
François   Ruf            paperback   400     6/30/1995    1995       155.00    265.00
Peter      Roddy          hardback    336     6/30/1995    1995       145.00    245.00
WA         Gould          hardback    182     6/3/1995     1995       100.00    170.00
Michael    Atkin          hardback    192     5/31/1995    1995       155.00    265.00
P          Cooper         paperback   210     5/1/1995     1995       65.00     110.00
E          Niemi          paperback   80      4/30/1995    1995       130.00    220.00
WA         Gould          hardback    190     4/1/1995     1995       55.00     95.00
Dietmar    Klein          paperback   150     3/31/1995    1995       45.00     75.00
RD         Lohr           hardback    240     3/31/1995    1995       145.00    245.00
Gilbert    Durieux        hardback    288     2/28/1995    1995       145.00    245.00
Peter         Fish            hardback    144   2/28/1995    1995   145.00   245.00
A             Ormerod         hardback    376   1/1/1995     1995   40.00    70.00
                              hardback    640   1/1/1995     1995   160.00   270.00
RM            Johnson         paperback   336   1/1/1995     1995   35.00    60.00
SM            Maini           paperback   44    1/1/1995     1995   20.00    35.00
K             Westlake        paperback   160   1/1/1995     1995   50.00    85.00
Christopher   Gasson          hardback    224   1/1/1995     1995   145.00   245.00
GA            Best            hardback    180   1/1/1995     1995   145.00   245.00
J             Shore           hardback    418   1/1/1995     1995   55.00    95.00
Marcelo       Raffaelli       hardback    256   1/1/1995     1995   145.00   245.00

RK            Dharmadhikary   paperback   40    1/1/1995     1995   20.00    35.00
David         Long            looseleaf   825   1/1/1995     2003   935.00   1590.00
B             Conolly         paperback   272   1/1/1995     1995   40.00    70.00
Vincent       Rich            hardback    336   11/30/1994   1995   150.00   255.00
J             Barrett         paperback   250   11/1/1994    1995   50.00    85.00
James         Lynch           hardback    272   10/31/1994   1994   75.00    130.00
AT            Andrews         hardback    182   9/1/1994     1994   145.00   245.00
D             Widgery         hardback    160   7/31/1994    1994   105.00   180.00
N             Bailey          hardback    304   5/31/1994    1994   150.00   255.00
WA            Gould           hardback    208   5/1/1994     1994   55.00    95.00
Julian        Roche           hardback    384   4/30/1994    1994   150.00   255.00
J             Maxwell         hardback    192   3/31/1994    1994   150.00   255.00
Fred          Wellings        hardback    208   2/28/1994    1994   145.00   245.00
Arthur        Wilson          paperback   272   2/28/1994    1994   60.00    100.00
JP            Pradier         hardback    418   1/1/1994     1994   170.00   290.00
K             Martin          hardback    164   1/1/1994     1994   150.00   255.00
JG            Brennan         hardback    196   1/1/1994     1994   145.00   245.00
W             Klein           paperback   40    1/1/1994     1994   20.00    35.00
GA            Codd            hardback    202   1/1/1994     1994   145.00   245.00
LC            Hollaway        hardback    352   1/1/1994     1994   155.00   265.00
NL            Kent            paperback   352   1/1/1994     1994   50.00    85.00
GC            Eckold          hardback    400   1/1/1994     1994   155.00   265.00
S             Borenstein      hardback    304   1/1/1994     1994   150.00   255.00
HR            Mills           paperback   240   1/1/1994     1994   30.00    50.00
Andreas       Prindl          paperback   272   1/1/1994     1994   75.00    130.00
H             Schultz         hardback    240   1/1/1994     1994   155.00   265.00
RTD           Richards        paperback   78    1/1/1994     1994   35.00    60.00
T             Nakajima        hardback    256   1/1/1994     1994   135.00   230.00
W             Ingamells       hardback    192   12/1/1993    1993   20.00    35.00
JK            Dennis          hardback    464   10/31/1993   1993   160.00   270.00
Helmut        Waszkis         hardback    304   10/31/1993   1993   65.00    110.00
N             Bailey          hardback    160   8/3/1993     1993   135.00   230.00
E             Dickinson       hardback    428   3/1/1993     1993   170.00   290.00
Julian        Roche           hardback    240   2/28/1993    1993   150.00   255.00
Tony          Warwick-Ching   hardback    304   2/28/1993    1993   145.00   245.00
                              hardback    864   2/1/1993     1993   135.00   230.00
KW            Waldron         hardback    462   1/1/1993     1993   180.00   305.00
DA            Shapton         paperback   472   1/1/1993     1993   50.00    85.00
R             Phaal           paperback   176   1/1/1993     1993   145.00   245.00
J             Park            paperback   58    1/1/1993     1993   20.00    35.00
W             Klein           paperback   50    1/1/1993     1993   20.00    35.00
DR        Karsa           hardback 178      1/1/1993   1993     145.00   245.00
CT        Dawes           hardback 272      10/31/1992 1992     145.00   245.00
TGF       Gray            paperback 96      10/1/1992 1992      145.00   245.00

T         Boniszewski     paperback   240   9/30/1992    1992   145.00   245.00
Thomas    Mohide          hardback    192   7/31/1992    1992   145.00   245.00
WA        Gould           hardback    165   5/1/1992     1992   100.00   170.00
DM        Lewis           hardback    384   4/1/1992     1992   60.00    100.00
                          paperback   304   1/1/1992     1992   55.00    95.00
ML        Richardson      hardback    414   1/1/1992     1992   170.00   290.00
Simon     Clow            hardback    160   1/1/1992     1992   145.00   245.00
FN        Cogswell        hardback    288   1/1/1992     1992   155.00   265.00
                          hardback    752   1/1/1992     1992   135.00   230.00
WA        Gould           hardback    550   1/1/1992     1992   145.00   245.00
LM        Cheng           hardback    312   1/1/1992     1992   145.00   245.00
Richard   Duncan          hardback    240   1/1/1992     1992   45.00    75.00
PW        Muncaster       hardback    144   10/31/1991   1991   115.00   195.00
M         Zairi           hardback    192   10/30/1991   1991   70.00    120.00
DJ        Walker          paperback   176   10/30/1991   1991   60.00    100.00
C         Creaser         hardback    204   10/1/1991    1991   145.00   245.00
H         Granjon         hardback    240   7/31/1991    1991   145.00   245.00
WA        Gould           hardback    172   7/1/1991     1991   50.00    85.00
W         Lucas           hardback    160   5/31/1991    1991   135.00   230.00

TR        Gurney          paperback 112     1/3/1991     1991   115.00   195.00
JP        Felix D'Mello   hardback 340      1/1/1991     1991   155.00   265.00
ID        Morton          hardback 240      1/1/1991     1991   145.00   245.00
R         Thompson        hardback 316      1/1/1991     1991   155.00   265.00
H         Deelstra        hardback 248      1/1/1991     1991   145.00   245.00
WS        Wilson          hardback 410      1/1/1991     1991   170.00   290.00
MJ        Hill            hardback 208      1/1/1991     1991   145.00   245.00
AY        Tamime          hardback 258      1/1/1991     1991   145.00   245.00
NT        Crosby          hardback 240      1/1/1991     1991   145.00   245.00
E         Dickinson       hardback 588      1/1/1991     1991   175.00   300.00
SJ        Maddox          hardback 208      1/1/1991     1991   145.00   245.00
DAT       Southgate       hardback 386      11/1/1990    1991   170.00   290.00
D         Keats           paperback 80      10/31/1990   1990   45.00    75.00
W         Lucas           paperback 112     10/31/1990   1990   85.00    145.00
JA        Street          paperback 64      8/31/1990    1990   105.00   180.00
PT        Houldcroft      hardback 96       6/30/1990    1990   80.00    135.00
D         Radaj           hardback 378      1/3/1990     1990   155.00   265.00
J         Hicks           paperback 64      1/2/1990     1990   60.00    100.00
M         Tolonen         paperback 240     1/1/1990     1990   145.00   245.00
PT        Houldcroft      paperback 112     1/1/1990     1990   80.00    135.00
MJ        Lewis           paperback 480     1/1/1990     1990   50.00    85.00
DG        Dugg            spiralbound182    12/1/1989    1989   20.00    35.00
A         Johnson         hardback 564      9/1/1989     1989   60.00    100.00
K         Bøving          hardback 432      1/1/1989     1989   160.00   270.00
E         Dickinson       hardback 290      2/1/1987     1987   150.00   255.00
F         Meuser          hardback 296      1/1/1987     1987   150.00   255.00
JR        Mitchell        hardback 400      1/1/1987     1987   180.00   305.00
J         Gordon Cook     paperback 760     1/1/1984     1984   55.00    95.00
J    Gordon Cook   paperback   240   1/1/1984   1984   45.00    75.00
C    Duckworth     paperback   588   3/1/1983   1983   40.00    70.00
D    Horstmann     paperback   80    1/1/1983   1983   35.00    60.00
PR   Lord          paperback   408   1/1/1982   1982   40.00    70.00
FN   Cogswell      hardback    176   1/1/1981   1981   135.00   230.00
Z    Grosicki      hardback    436   1/1/1977   1977   135.00   230.00
Z    Grosicki      hardback    388   1/1/1975   1975   135.00   230.00
                   paperback   48    1/1/1973   1973   30.00    50.00
Price EUR Short Description


160.00    This book publishes high quality articles (full research articles, review articles and cases studies) with a special emphasis on rese
140.00    This book is focussed on the types of bearing that can achieve extreme accuracy of rotation and the properties of most interest
160.00    The third book in the Woodhead Publishing Reviews: Mechanical Engineering Series publishing high quality articles (full researc
185.00    Membrane reactors (MRs) exploit advanced membrane materials, design and manufacturing to replace conventional industrial
175.00    The need for more efficient, cleaner and higher output coal power plants means that new materials and designs must be develo
205.00
215.00    This book provides comprehensive and systematic coverage of advanced fuels and vehicle technologies that will be instrumenta
215.00    This book provides a comprehensive and systematic reference on the range of biomass and waste recovery and conversion pro
200.00    This book provides a comprehensive and systematic reference on the development and deployment of biogas supply chains an
200.00    Radioactive waste management is critical to the use of nuclear power, the use of radioisotopes in research, medicine and indus
190.00    This book provides a comprehensive reference on coal power plant materials, their behaviour under operational loads, and app
175.00    With the development and application of CO2 capture and storage (CCS) technology in industry, questions are being asked of h
205.00    The size of wind turbines blades continues to increase in pursuit of higher efficiency energy conversion. This presents materials
125.00    This comprehensive text is an essential guide to the fundamentals of food chemistry in specific food groups. The book is divided
200.00    This book presents a systematic and comprehensive review of coal utilization in industrial applications, from power plants to st
125.00    Functional textiles and clothing examines the concepts of clothing design and development and looks at material and structura
190.00    Membrane reactors (MRs) exploit advanced membrane materials, design and manufacturing to replace conventional industrial
160.00    Microalgal bioprocesses employ microalgae as cellular bioreactors for processing raw materials for the production of valuable p
175.00    This book reviews the theory and application of probabilistic safety assessment methods used to calculate nuclear power plant

190.00    Bacteria, yeast and microalgae can acts as producers (or catalysts for the production) of food ingredients, enzymes and nutrace
175.00    Food and beverage labels often specify a product’s geographical origin, species, variety and method of production. These claim
200.00    Current fleets of conventional and nuclear power plant face increasing hostile environmental conditions due to increasingly hig
185.00    Light water reactors (LWRs) are the predominant class of nuclear power reactors in operation today, including designs such as t
200.00    Tree nuts and peanuts are popular foods that are increasingly recognised for their health-promoting properties. They are also w
160.00    This book critically reviews the fundamental principles, systems, oxygen carriers and carbon dioxide carriers relevant to chemic
175.00    Biomass utilisation represents an increasingly important source of low or zero carbon power generation. Developments in the f
150.00    Wind turbine gearboxes are one of the major reliability issues for wind energy operators, presenting expensive maintenance an
125.00    The book details food safety in spices and provides guidelines for a food safety management system in the spice and herb manu
175.00    Advanced electricity transmission and distribution network technologies are required to reduce losses, sustain higher network e
140.00    This book provides an overview of the fabrication methods for anti-abrasive nanocoatings. The connections among fabrication
125.00    This book discusses fiber structure and its effect on yarn structure and mechanical properties. The first part of the book discuss
115.00    Modification of fibres for technical applications reviews the physical and chemical modification of natural and synthetic fibres f
140.00    This book comprehensively examines the fundamental safety requirements and safety systems for nuclear power plants. Funda
205.00    This book reviews the computer synthesis of diffractive optical elements (DOE) used for transforming laser radiation and invest
230.00    The recent development of easy-to-use sources and detectors of terahertz radiation has enabled a growth in applications of ter
180.00    Packaging technology: Fundamentals, materials and processes provides a comprehensive introduction to packaging. The book t
185.00    For any fabric structure, the ability to understand how to join fabrics together and maintain the integrity of the join is critical. A
180.00    Medical devices are becoming more intricate with the use of a wide range of materials and components which must be joined e
140.00    Breast implants are one of the most regularly used prosthesis (both for cosmetic and reconstructive purposes) in plastic surgery
185.00    Biomedical sensors play an important role in the detection and monitoring of a range of critical medical conditions. This publica
145.00    The textile and clothing industry is going through rapid change. This important book reviews these changes and their implicatio
180.00    Implant and device manufacturers are increasingly being faced with the challenge of proving that their implants or devices are
180.00    The reactor pressure vessel (RPV) is central to a nuclear reactor, and is therefore a life-determining structural component, i.e. R
175.00    Medical robotics are becoming a reality and they are increasingly used in a range of medical applications such as diagnostics, su
230.00    Population levels have grown rapidly in recent decades, with an attendant increase in urbanisation, and higher density urban p
200.00    Nanotechnology is being increasingly utilised and the majority of fields within medicine are likely to be affected. Tissue enginee
175.00    Methods and materials for dental repair and restoration are becoming more and more advanced as the demand for attractive a
215.00    Metallic films play an important role in modern technologies such as integrated circuits, information storage, displays, sensors a
155.00   Process control is an integral stage of textile manufacture. If used well, it reduces defects, waste, costs and environmental impa
155.00   Simulation and modelling can be used to analyse complex phenomena in the textile industry such as fibre and fabric structure.
170.00   Micro-Electro-Mechanical-Systems (MEMS) are miniature devices or machines which integrate elements such as actuators, sen
185.00   The Finite Element Method (FEM) is a modelling technique that allows entire designs to be constructed, refined and optimized
175.00   The development of imaging techniques is of great importance for the monitoring of medical implants, diagnosis of disease and
150.00   Given such properties as strength and low weight, magnesium is finding a wide range of applications. As a result, there has bee
215.00   Encapsulation technologies play a key role in the stabilisation and protection of sensitive nutrients and food ingredients. Delive

200.00   Functional materials are a class of advanced energy conversion materials of use in photoelectric, thermoelectric, electrochemic
200.00   Chemical contaminants such as pesticide residues, environmental organic contaminants, heavy metals and fungal toxins are a m
190.00   The nuclear fuel cycle is a very broad subject that includes mining, milling and smelting of ores, enrichment, fuel element fabric
175.00   Metal forming processes involve varying degrees of deformation to the metal substrate. This deformation results in changes to
205.00   Consumers are increasingly seeking foods that are rich in dietary fibre and wholegrains, but are often unwilling to compromise
180.00   The supply of safe, high quality products is a fundamental food industry objective, yet quality testing processes can be slow and
175.00   Increasing global consumerism and population has led to an increase in the levels of waste produced. Energy recovery represen
185.00   Semiconductor laser diodes are the backbone of the optical telecommunications infrastructure that supports the Internet. They
210.00   Ultrasonic transducers are key devices for important applications such as medical treatments, non-destructive testing and prec
160.00   It is vital that all materials and devices that are implanted in, or come into contact with, the human body are safely and effectiv
190.00   The cost of electronics has significantly reduced in recent years and investment in robotics and automation in the food sector is
55.00    This textbook is intended for those studying A-levels, diplomas or undergraduate programs that focus on textiles and fashion. It
280.00   Electronic waste is a growing problem. The EU directive on waste electrical and electronic equipment (WEEE) aims to minimise
50.00    The book provides a concise and quick reference to fitness for service techniques used for pressure vessel and piping applicatio
150.00   With increased environmental awareness and rising costs, manufacturers are investing in real time monitoring and control of d
175.00   The book offers chemists and engineers an interdisciplinary and comprehensive reference on biolubricant base stocks, develop
170.00   Textiles play a vital role in the manufacture of various medical implants including the replacement of diseased or non-functionin
185.00   Quantum optics are studied in order to understand how light and matter interact on a quantum level. This knowledge can then
190.00   Medical technology is becoming increasingly sophisticated, particularly in the area of Micro Electro Mechanical Systems (MEMS
175.00   Polymer composites consist of a polymer matrix with the addition of fillers to enhance strength and other properties. This book
180.00   Intelligent sensor systems for medical applications can greatly improve quality of life and medical care. This book discusses the
185.00   Understanding radionuclide behaviour in the environment, either in the biosphere or in subsoil, is key to the assessment of the
145.00   Given the rapid development and use of polymers within medicine, the durability and reliability of polymer biomaterials and de
175.00   Polymer matrix composites are widely used within many different industries and applications from the automotive industry to m
170.00   Increasing interest in nanofibre materials, particularly functional nanofibers with special properties for technical applications, c
185.00   Brazing is a fast growing area of joining in metals. Advances in brazing reviews current research in the area summarized by som
180.00   The use of lasers for the deposition and processing of electronic and photonic materials is becoming increasingly widespread an
210.00   Surface arthroplasty (surface replacement) of the hip with metal-on-metal bearings is one of the fastest growing areas within th
190.00   This book provides an integrated and comprehensive reference on concentrating solar power (CSP) systems and technology, fro
170.00   Woven fabrics are used in a wide range of applications from apparel to automotive interiors. Part I reviews types of fibres and y
170.00   This authoritative book reviews the highly important area of military clothing, armour and associated equipment for the develo
215.00   The provision of microbiologically-safe food with an acceptable shelf life is a central preoccupation of the food industry. Foods
200.00   Metal Injection Molding (MIM) is an important technology for the manufacture of small and intricate components with a high l
145.00   Bonding is an important joining technology in marine engineering, particularly for materials such as composites. The first part o
175.00   Aerospace engineering is a very competitive environment and yet highly regulated, so innovation and change, while essential, m
185.00   Experts estimate that demand for seafood will most probably increase in the future. As a substantial increase in production from
140.00   This book places particular emphasis on issues of model quality and ideas of model testing and validation. Mathematical and co
140.00   Spacecraft thermal control covers the necessary material required for engineers to perform the design and qualification of a sp
175.00   As a consequence of the growing awareness of environmental issues, the use of natural fibres is increasing. This important two-
200.00   Printed films are used in sensors, actuators, circuit components, heaters and solar cells. This book covers developments in print
190.00   This book provides a comprehensive review of gas turbine science and engineering. Coverage includes large-scale power genera
160.00   As a consequence of the growing awareness of environmental issues, the use of natural fibres is increasing. This important two-
185.00   Packaging technologies remain a key area of interest for the food industry. When they are successfully employed, product safet
140.00   This book provides a detailed overview of the processing methods of nanomaterials and the relationships between processing c
380.00   This book presents the papers from the latest international conference, following on from the highly successful previous confer
175.00   Implant wear is a major problem facing the long-term success of orthopaedic implants and joints. Wear particles produced by t
190.00   Herbs and spices are among the most versatile and widely-used ingredients in food processing. As well as their traditional roles
140.00   Aimed at professionals in the aviation industry and students of aircraft maintenance, this book covers the use and managemen

215.00   Earth has been used as a building material for centuries, providing local communities with a sustainable and durable material to
205.00   Edited by two leading experts in the field, and with contributions from some of the most distinguished figures in steel research,
215.00   Edited by two leading experts in the field, and with contributions from some of the most distinguished figures in steel research,

190.00   Herbs and spices are among the most versatile and widely-used ingredients in food processing. As well as their traditional roles
205.00   Chemical and microbiological contaminants can be transferred from feedstuffs into food-producing animals, negatively affectin
175.00   MAX phases presents a comprehensive review of synthesis, microstructures, properties, ab-initio calculations and applications o
200.00   Muscle foods are generally highly perishable and must be stored under carefully controlled conditions to limit undesired microb
270.00   In recent decades much research has been carried out into the effects of dietary constituents on human immune responses. On
145.00   Traditional cardiopulmonary bypass techniques have suffered from a number of disadvantages including haemodilution, inflam
180.00   Many customers prefer foods containing natural, rather than synthetic additives and ingredients. Formulating a successful food
140.00   A key area of clothing and apparel manufacturer is garment cutting. This book provides a detailed review of fabric cutting as we
160.00   Wrought magnesium alloys are alloys that have been mechanically worked after casting. Wrought alloys possess higher strengt
270.00   The complex changes that take place during breadmaking and their influences on the traits consumers use to define quality are
150.00   Combined cycle power plants are one of the most promising and flexible approaches to conventional, fossil-fuel and biomass-fi
180.00   The food industry’s interest in nanotechnology is growing. This book examines a wide range of nanoscale materials and nanote
145.00   A textured yarn is a continuous filament yarn that has been processed to introduce crimps, coils, loops or other fine distortions
200.00   Progenitor and stem cells found in all multi-cellular organisms have the ability to renew themselves and change into a variety o
210.00   This important book summarises the wealth of recent research on colour and its use in design. The first part of the book review
205.00   Developments in spinal surgery have led to an increased demand for bone stock. However, the demand for bone stock often ou
180.00   Laser surface modification (LSM) offers many advantages over conventional surface engineering technologies. LSM can selectiv
115.00   This book deals with the mechanics and dynamics of textile machines. The first chapter examines various types of power drives
140.00   Aimed at engineering students and professionals working in the field of mechanics of space flight, this book examines space tet
170.00   Automotive materials need to meet increasingly demanding challenges in such areas as safety and fuel economy. With contribu
150.00   This book describes different types of rubber-pad forming processes currently being studied for their experimental and numeric
160.00   PEMFCs and DMFCs represent promising low-temperature electrochemical power generation technologies that operate on hyd
145.00   This book provides an introduction to the physics of nanoelectronics which encompasses spintronics, electronics, Hall effects, s
150.00   Biodiesel is one of the main biofuels capable of substituting fossil fuel usage in compression ignition vehicles, and is used in a va
160.00   This book, the second in the Woodhead Publishing Reviews: Mechanical Engineering Series, will present, high quality articles (fu
160.00   The biomaterials sector is rapidly expanding due to the increase in healthcare spending worldwide. Coatings and surface modifi
200.00   PEMFCs and DMFCs represent promising low-temperature electrochemical power generation technologies that operate on hyd
185.00   Polymer matrix composites are increasingly replacing traditional materials, such as metals, for applications in the aerospace, au
270.00   Understanding corrosion mechanisms, the systems and materials they affect, and the methods necessary for accurately measur
215.00   Over the course of their operational life, a variety of components in both nuclear power plants and other civilian nuclear faciliti
180.00   The book covers the use of nanomaterials to prevent corrosion. The first section deals with the fundamentals of corrosion prev
180.00   High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high e
125.00   Statistics for textile and apparel management deals with the fundamental principles of statistical methods and their application
230.00   The potential development of any nuclear power programme requires a rigorous justification process built upon an objective in
110.00   Strategy implementation in the garment industry requires a special kind of expertise. Formulating a strategy requires an entrep
180.00   Metal working fluids (MWFs) provide important functions such as lubrication and cooling in the machining of metals. This book
170.00   The properties of concrete before it has set can have a significant impact on performance. This important book reviews method
175.00   This book, the first in the Woodhead Publishing Reviews: Mechanical Engineering Series, will publish high quality articles (full re
185.00   Sensory evaluation methods are extensively used in the wine, beer and distilled spirits industries for product development and
190.00   This important two-volume book reviews the problem of degradation of metals and other materials exposed to hydrogen. The
55.00    The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft. This es
185.00   Welding and joining techniques play an essential role in both the manufacture and in-service repair of aerospace vehicles and c
150.00   This book not only provides a fascinating overview of how products are launched, but also offers a source of practical guidance
235.00   This important two-volume book reviews the problem of degradation of metals and other materials exposed to hydrogen. The
360.00   This book contains the papers of the Internal Combustion Engines: Performance fuel economy and emissions conference, in the
150.00   Authored by two leading experts, this book provides responses to over 300 of the most frequently-asked questions about extru
155.00   This book provides engineers and students with a general framework focusing on the processes of designing new engineering p
85.00    Written by a leading expert in the field, the first edition established itself as a standard introduction to the range of available w
185.00   Machining processes play an important role in the manufacture of a variety of composite materials for use in a number of indus
125.00   This book looks at the history of knitting and how the process has evolved to the present. Chapters discuss the principles involv
115.00   There are number of books and articles available dealing with technology and management separately, but explaining how thes
115.00   This book focuses on the industrial engineering aspects in apparel production. Garment fashion technology students, researche
235.00   Food safety is vital for consumer confidence and the sanitary design of food processing facilities is central to the manufacture o
210.00   Dyeing is one of the most effective and popular methods for colouring textiles and other materials. This two volume collection p
160.00   Dyeing is one of the most effective and popular methods for colouring textiles and other materials. This two volume collection p
50.00    The API Individual Certification Programs (ICP) are well established in the oil/gas/petroleum industries. This guide reviews one o
235.00   This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune,
160.00   This forward-thinking, practical book provides essential information on modern machining technology for industry with empha
200.00   The growing use of composites for structural applications in sectors such as aerospace demands that engineers have a thorough
200.00   Metals can become less reactive to corrosion processes (i.e. they become passive) because of protection by a self-healing surfa
155.00   Recent advances in techniques to characterise thin films in situ during deposition could lead to an improved understanding of d
175.00   Aimed at students, faculty and professionals in the aerospace field, this book provides practical information on the developmen
150.00   Aerodynamic measurements presents a comprehensive review of the theoretical bases which experimental techniques used in
210.00   Eight expert authors have joined Duncan Manley to produce the new edition of this standard industry reference. Substantially r
210.00   Coal- and gas-based power plants currently supply the largest proportion of the world’s power generation capacity. This book c
210.00   Reinforcements are an integral part of all composites and the quality and performance of the composite can be optimised by m
200.00   Conventional coal, oil and gas resources used worldwide for power production and transportation are limited and unsustainabl
230.00   Stress corrosion cracking (SCC) causes sudden failure of metals and other materials subjected to stress in a corrosive environme
200.00   While products such as bananas, pineapples and kiwifruit have long been available to consumers in temperate zones, novel fru
140.00   Electrical motor products discusses reviews the energy efficiency management laws for electrical motor products in United Stat
180.00   This book, the first of its type, provides a comprehensive and in-depth coverage of the science and technology of polymer modi
180.00   Nanocoatings and ultra-thin films gives a comprehensive account of the state-of-the-art of nanocoatings and ultra-thin films. Th
175.00   This book reviews specialist yarn and fabric structures. Written by an international team of contributors, the text discusses the
185.00   This handbook is a convenient one-volume guide to the major proteins used in the food industry. The chapters, written by spec
380.00   This book contains the papers presented at the 7th International Conference on Compressors and their Systems at City Univers
170.00   Electromigration is a significant problem affecting the reliability of microelectronic devices such as integrated circuits. Recent re
235.00   Progress in membrane materials, selective membrane design, and computer modelling and simulation have contributed greatly

190.00   The 2 volumes review essential research and best practice in the production and processing of eggs with particular emphasis on
185.00   The opening chapters in Volume 2 of this essential collection address aspects of egg contamination, with particular emphasis on
210.00   With a rising population and the increasing range of textiles for medical products, the need to understand and improve medica
170.00   Healthy agriculture, healthy nutrition, healthy people contains selected papers from the Inaugural Conference Healthy Agricult
235.00   These books provide public health experts, nutritionists, students, scientists, development professionals and policy makers with
150.00   Due to their biocompatibility and bioactivity, bioactive glasses are used extensively as implant materials throughout the human
150.00   Tailor welded blanks are sheets made from different strengths and thicknesses of steel pre-welded together being pressed and
155.00   With issues such as a rising population and increasing concerns surrounding the environment and infection prevention, the nee
160.00   Biaxial stretching of film is used for a range of applications. Many products ranging from food packaging to packages for fresh c
175.00   Thin-film technology is used in the application of microelectronics, optics, magnetics, hard and corrosion resistant coatings and
175.00   Computer technology has transformed textiles from their design through to their manufacture. This book reflects the significan
190.00   There is emerging evidence that nutrition in early life can influence later mental performance and that diet in later life can redu
200.00   Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the
215.00   Consumers seek meat products that are nutritionally-balanced, contain fewer added ingredients and have excellent sensory ch
140.00   Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applicatio
200.00   Chapters in Volume 4 review factors affecting the quality of different tropical and subtropical fruits, concentrating on postharve
200.00   Chapters in Volume 3 review factors affecting the quality of different tropical and subtropical fruits, concentrating on postharve
160.00   Superplastic forming is an advanced metalworking process that can form high-quality, complex components in one operation. S
185.00   This authoritative reference work provides a detailed study of sustainable development of textiles. The book opens with an intr
200.00   Chapters in Volume 2 of this important collection review the factors affecting the quality of different tropical and subtropical fr
190.00   Rice varieties differ greatly in their physicochemical properties and eating quality. Other factors such as milling, ageing and parb
200.00   Wound repair is an important and lucrative sector of the medical industry. Consequently significant and increasingly sophisticat
160.00   Electrospinning is most commonly associated with textile manufacturing. However recent research and development have prov
185.00   The textile industry is increasingly based on on-going innovation and development of higher performance products. This book e
160.00   Superplasticity and grain boundaries in ultrafine-grained materials discusses a number of problems associated with grain bound
185.00   Over the past decade, computer supported data analysis by statistical methods has been one of the fastest growth areas in che
270.00   Diesel engine system design links everything diesel engineers need to know about engine performance and system design in or
155.00   Weld distortion and buckling is caused by expansion and contraction of the weld and base metal during the heating and cooling
150.00   Adhesives are widely used in the manufacture of electronic devices to act as passive and active components. Recently there has
150.00   Bioactive materials in medicine provides readers with information on the current status and developments in bioactive materia
175.00   The book begins by considering the main types of decorative material and the physical, mechanical and other properties they r
175.00   The construction of buildings and structures relies on having a thorough understanding of building materials. Building materials
210.00   Multifunctional and nanoreinforced polymers for food packaging provides a comprehensive review of polymers for use in packa
420.00   This book contains the papers presented at the IMechE and SAE International, Vehicle Thermal Management Systems Conferen
150.00   This book reviews the wealth of research into shape memory and superelastic alloys that has resulted in a wide range of new in
200.00   The first edition of Functional foods quickly established itself as an essential and authoritative guide to this area. The book sets
190.00   This book provides a systematic and comprehensive reference on small- and micro-CHP (combined heat and power) systems su
180.00   This book provides theoretical and experimental investigations on vessels under external pressure together with design hints. H
185.00   Non-crimp fabric (NCF) composites are composites that are reinforced with woven mats of straight (non-crimped) fibres. Straig
175.00   Diets high in saturated fats may raise blood cholesterol and increase the risk of heart disease, but reducing saturated fats in foo
160.00   Fatigue is often a precursor to the fracture of a welded joint. This book summarises the latest research in understanding fatigue
175.00   The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geo
175.00   This collection provides a broad overview of textile design ranging from woven and knitted fabric design through to the dyeing,
115.00   This book discusses recent trends in soft beverages. Chapters discuss chemical composition, health benefits and by-products. R
115.00   This book provides an introduction to quality management in spinning operations. Chapters discuss the impact of yarn paramet
230.00   The stability and shelf life of foods and beverages are critical to their success in the market place, yet companies can experience
175.00   High-temperature superconductors reviews growth techniques, properties and applications of key high-temperature supercond
170.00   One of the most important factors in ensuring successful osseointegration is the stability of the implant after its insertion. In or
215.00   Polymer-carbon nanotube composites reviews the use of carbon nanotubes as reinforcements in a polymer matrix, creating a n
190.00   The use of magnesium alloys is increasing in a range of applications wherever lightweight materials are needed. As a result, the
215.00   Nanostructured metals and alloys have enhanced tensile strength, fatigue strength and ductility and are suitable for use in app
160.00   Issues related to food integrity are becoming increasingly important. Guaranteeing the authenticity, geographical origin, tracea
180.00   Advanced separation technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of rad

175.00   There is a growing trend towards the use of natural (sustainable) fibres as reinforcements in composites. One of the major mec
200.00   Nanostructured silicon-germanium (SiGe) provides the prospect of novel and enhanced electronic device performance. This boo
150.00   Hydrogels are a type of polymer which, through a range of chemistries, can be manipulated to alter and control the hydrogel’s
65.00    Scientific computing is about developing mathematical models, numerical methods and computer implementations to study an
175.00   Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power pla
160.00   This book is an important text for designers, engineers and technicians involved in the manufacture and use of knitted textiles a
150.00   Children’s growth, development and health potentials are dependent on the nutrient quantity and quality of their diet, yet man
170.00   Milk and milk products in human nutrition presents the discussions from the Nestlé Nutrition Institute Workshop held in Marra
175.00   Mycotoxin contamination remains a significant concern for both the food processing and animal feed industries. With contribu
155.00   Tribology for engineers discusses recent research and applications of principles of friction, wear and lubrication, and provides th
185.00   Radioactive wastes are generated from a wide range of sources presenting a variety of challenges in dealing with a diverse set o
175.00   The development of novel injectable biomaterials to be used in non-invasive surgical procedures has attracted much attention
180.00   Wear comfort is one of the most important properties of clothing demanded by consumers. Part one of this book reviews the f
160.00   Thermal barrier coatings are used to counteract the effects of high temperature corrosion and degradation of materials expose
150.00   Compared with electroplating, electroless plating allows uniform deposits over different surfaces. Electroless copper and nickel
40.00    This undergraduate text deals with the basics of group theory and its application to the analysis of vibrational spectra, and a mo
150.00   Service life estimation and extension of civil engineering structures reviews ways of rehabilitating ageing reinforced concrete st
190.00   Large-scale wind power generation as a renewable energy source makes substantial contributions to power grids in many coun
160.00   Demand for organ transplants far exceeds available donor organs. As a result some patients may die whilst waiting for a transp
230.00   There have been major recent advances in robotic systems that can replace humans in undertaking hazardous activities in dem
190.00   Now in its third edition, this book is widely regarded as the standard reference on the cocoa trade. It provides an authoritative
185.00   Consumers favour foods and beverages with fewer synthetic additives, but products must also be safe to eat and have a sufficie

185.00   Soft computing refers to a collection of computational techniques which study, model and analyse complex phenomena. As ma
190.00   Creep and fatigue in polymer matrix composites reviews ways of modelling creep and fatigue in polymer matrix composites wit
175.00   Surface modification of biomaterials plays a significant role in determining the outcome of biological-material interactions. With
200.00   The global increase in the use of biofuels as substitute transportation fuels has prompted research and development into advan
230.00   This book provides a comprehensive overview of the production, properties and processing of aluminium and its applications in
190.00   Understanding the epidemiology of pathogens in production chains and processing environments is highly important for food s
100.00   Managing wastes from aluminium smelter plants discusses major environmental polluting waste material from aluminum indus
250.00   Polymer nanocomposites are polymer matrices reinforced with nano-scale fillers. Understanding the physical properties of poly
175.00   Heart disease is one of the leading causes of death in the USA and Europe and with increasingly obese populations within the d
175.00   Optical communication using optical fibres as the transmission medium is essential to handling the massive growth of both tele
185.00   The use of magnesium and its alloys is increasing due to their light weight and other useful properties. This book covers all aspe
205.00   Novel processing technologies can bring benefits in terms of product quality and process efficiency, but the commercialisation o
210.00   Separation, extraction and concentration processes are essential for the preparation of ingredients and quality optimisation of

250.00   Plant life management (PLiM) is a safety-based methodology for the management of nuclear power plants over their entire life
50.00    The API Individual Certification Programs (ICPs) are well established worldwide in the oil, gas, and petroleum industries. This Qu
55.00    Provides, in a single volume, a unified treatment of first year topics fundamental to university mathematics. Successfully bridge
185.00   The agriculture and food sectors have a significant impact on the environment. Producers and processors are increasingly aimin
205.00   Experts from major winemaking centres worldwide review oenology and wine quality in the second volume of this important co
290.00   Tribology is one element of many interacting within a vehicle engine and powertrain. In adopting a detailed, theoretical, compo
185.00   This book provides an invaluable single source of information on the advances that have been made in yarn spinning technolog
215.00   Piezoelectric materials produce electric charges on their surfaces as a consequence of applying mechanical stress. They are use
190.00   Textiles, polymers and composites are increasingly being utilised within the building industry. This pioneering text provides a co
185.00   The two volumes of Oxidation in foods and beverages and antioxidant applications review food quality deterioration due to oxi
190.00   This book explores sintering, the method of manufacturing components from ceramic or metal powders by heating the materia
115.00   This book examines advances in production management in the garment industry. Chapters analyse layout and planning of pro
190.00   Oxidative rancidity is a major cause of food quality deterioration, leading to the formation of undesirable off-flavours as well as
190.00   This independent manual provides airport planners and architects with an essential planning guide and reference tool, based o
175.00   Biotechnology has impacted the textiles industry through the development of more efficient and environmentally friendly man
175.00   The energy, petrochemical, aerospace and other industries all require materials able to withstand high temperatures. High tem
185.00   The measurement of colour is important in many commercial operations such as the textile, paint and food industries. This boo
205.00   The development of high-performance polymer electrolytes is key to improving a number of devices such as batteries and fuel
215.00   Sensory and consumer scientists require a range of knowledge and skills to contribute successfully to the innovation process. W
145.00   Freeze-drying is an important preservation technique for heat-sensitive pharmaceuticals and foods. Products are first frozen th
230.00   The long term safety of spent nuclear fuel and radioactive waste materials must be assured without active human oversight, ba

200.00   Wind power generation is fast becoming one of the leading renewable energy sources worldwide, with increasing penetration o
200.00   Fatigue is the progressive and localised structural damage that occurs when a material is subjected to cyclic loading. The use of
230.00   This comprehensively relays the state-of-the-art in laser materials processing technology and applications. Starting with laser cu
205.00   This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinf
175.00   Arranged in practical question and answer format, Winemaking problems solved provides brief, quickly accessible solutions to i
175.00   Many new, or relatively new, welding processes such as friction stir welding, resistance spot welding and laser welding are bein
200.00   Medical textiles remain one of the most dynamic areas of research in textiles. Medical and healthcare textiles is the fourth in a
200.00   Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do
185.00   Biointegration is essential for the successful performance of implanted materials and devices within the human body. With an i
205.00   Technical yarns are produced for the manufacture of technical textiles. As the range of technical textiles is rapidly increasing, an
200.00   Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do
145.00   The nonwoven fabrics industry is one of the fastest growing sectors of the textile business. Such fabrics have a broad spectrum
145.00   This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinf
175.00   This well-known and highly successful book was first published in 1973 and has been completely re-written in subsequent editio
200.00   Bioethanol is one of the main biofuels used as a petroleum-substitute in transportation. Second generation bioalcohol producti
190.00   Fossil-fuel power plants generate the majority of the world's power, but many plants are ageing and cannot meet rising global e
185.00   Mechanochemical processing is a novel and cost effective method of producing a wide range of nanopowders that are used in t
175.00   Producing products of reliable quality is vitally important to the food and beverage industries. In particular, companies often fa
205.00   Surface engineering of light alloys provides a comprehensive review of the various surface engineering techniques employed to
200.00   The quality of cereal products is dependent to a large extent on the suitability of the cereal grains processed. Therefore it is ess
140.00   Modern approach to maintenance in spinning is a simple and accessible guide to the knowledge required to fulfill the role of a m
100.00   This book provides an overview of the types of fibres used in home textiles and the key issues relating to product development,
115.00   Quality Management Systems play an increasingly important role in the textile industry, both from the point of view of industry
160.00   This book contains selected papers from the ‘3rd Congress of the International Society of Nutrigenetics/Nutrigenomics’ held in
205.00   Many aspects of both grape production and winemaking influence wine flavour, aroma, colour and mouthfeel. Factors affecting
220.00   For a food product to be a success in the marketplace it must be stable throughout its shelf-life. Changes due to food chemical
215.00   Achieving a sustainable level of energy efficiency in buildings, while maintaining occupant comfort, would both substantially red
200.00   The second volume of this comprehensive reference opens with chapters on nutritional aspects of milk. Part two focuses on im
160.00   The issue of risk should be embedded into the mind set of every engineer and manager to improve safety and dependability. Co
200.00   Consumers demand quality milk with a reasonable shelf life, a requirement that can be met more successfully by the milk indus
185.00   Despite recent advances in medical devices using other materials, metallic implants are still one of the most commercially signif
205.00   Adhesive bonding is often regarded as a cost effective and effectual way to join mechanical structures. This important book rev
180.00   Blast protection of civil infrastructures and vehicles using composites provides a thorough understanding of the science and app
190.00   High standards of noise, vibration and harshness performance are expected in vehicle design. Refinement is therefore one of th
215.00   Interest in the toxic effects of fires has been rapidly increasingly. This book raises the important issues of the types of toxic efflu
185.00   This book is an invaluable source of information on woven textiles and their production. The book is divided into different secti
175.00   Research programs into the manufacture of lightweight automobiles have led to the consideration of a variety of materials, suc
100.00   Because worsted wool is so durable, it wears well and drapes easily. Such qualities make it an ideal fabric for all sorts of garmen
230.00   Biodiesel fuel is increasingly being used in diesel supplies worldwide, as it provides both an environmentally preferable option a
200.00   Given the infinite number of applications of polymeric materials in everyday life, especially applications where a failure in servic
160.00   This publication explores in some detail the relationship between early growth patterns and later neurodevelopment, obesity, c
170.00   This book addresses and tries to identify forces that potentially drive innovation in pediatric nutrition, an endeavor which surpa
115.00   Clothing comfort is one of the most important attributes of textile materials. This book starts with an introduction to clothing c
155.00   Coatings and laminates allow the introduction of smart functionalities for textile products. They are suitable for a wide range of
200.00   Many factors, including increasing internationalisation and the need to secure consumer confidence, are driving innovation in f
190.00   This important book summarises the wealth of research on methods for repairing soft tissue. Part one discusses cartilage repair
140.00   Fifteen leading experts present brief descriptions of some of the latest developments of the physiology of eating and weight reg
185.00   Friction stir welding (FSW) is a solid-state welding process that is gaining wide acceptance in industry, especially the shipbuildin
200.00   With an increasingly aged population, eye diseases are becoming more widespread. Biomaterials have contributed in recent ye
205.00   This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composit
215.00   Volume 2 of the two-volume set Advanced direct injection combustion engine technologies and development investigates diese
145.00   Increasingly, consumers desire information about the health, safety, environmental and socio-economic characteristics of food
200.00   Drug delivery systems represent a vast area of research and development within biomaterials and medicine and the demand fo
155.00   Featuring contributions by leading scientists in the field, this book discusses not only the role of omega-3 fatty acids in maintain
200.00   This book provides an overview of how modelling can be used within the textile industry, including case studies of the use of m
140.00   As the name suggests, this book discusses in detail the fundamentals and practices of dyeing and colouration of textiles. It cove
205.00   The subjects of the Symposia are on composite materials with matrices behaving as brittle in normal or special conditions. Britt
205.00   Biomedical composites provides a thorough review of the current status, recent progress and future trends in composites for b
215.00   Food processors are under pressure, both from consumers and legislation, to reduce the amount of waste they produce and to
155.00   Maraging steels are high-strength steels which possess excellent toughness. Maraging refers to the ageing of martensite, a hard
175.00   Many concrete structures around the world have reached or exceeded their design life and are showing signs of deteriorating.
215.00   Advances in technologies for the extraction and modification of valuable milk components have opened up new opportunities f
175.00   Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel econo
145.00   Laser cooling of solids provides a timely review of this promising field of research. Particular attention is given to the physics of
205.00   Volume 2 begins by reviewing natural fibres such as cellulosic, cotton, protein, wool and silk fibres. Part two considers regenera
50.00    A concise and accessible guide to the knowledge required to fulfil the role of a welding inspector. In covering both European an
205.00   With its distinguished editors and international team of contributors, this authoritative collection examines the structure of ma
185.00   The global textile industry, like many others, is inherently unsustainable and has a high impact upon the environment. The cott
215.00   Tensile failure is the resistance of a material to rupture when subjected to tension. Many fibres offer great flexibility, this chara
25.00    We take it for granted, but without it we perish and if we continue to abuse it, it may kill us in the end. This fascinating text pro
50.00    To commemorate the 400th anniversary of Galileo’s historic first recorded astronomical observations and to coincide with the U
25.00    To commemorate the 400th anniversary of Galileo’s historic first recorded astronomical observations and to coincide with the U
185.00   Cold weather can be a potential hazard to human health, adversely affecting physiological functions, work performance and we
205.00   The growing use of polymer composites is leading to an increasing demand for fractographic expertise. Fractography is the stud
250.00   Many of the engineering problems of particular importance to railways arise at interfaces and the safety-critical role of the whe
175.00   This book provides an overview of the advances that have occurred within the interior textile sector. The reader will gain an un
160.00   The broad scope of the subjects covered and the improved quality of the data collected make the European Nutrition and Heal
205.00   Biofilms in the food and beverage industries may form when bacteria attach to and colonise the surfaces of food handling and p
155.00   Glass is increasingly being used as a structural material in new buildings and the building envelope may consist entirely of glass
115.00   Significant features of different testing protocols for apparel and related accessories are examined alongside various essential s
140.00   The need to control the temperature and humidity in a textile mill is essential to successful spinning. This book explains the prin
155.00   This convenient reference provides answers and solutions to a wide variety of queries and difficulties commonly encountered b
175.00   The surface of textiles offers an important platform for functional modifications in order to meet special requirements for a var
190.00   Bone repair is a fundamental part of the rapidly expanding medical care sector and has benefited from many recent technologi
175.00   When things go wrong in the bakery, the pressures of production do not allow time for research into the solution. Solving these
160.00   Microbial host-interaction deals with the relationship between the gut microbiota as well as altered pattern of early microbial c
200.00   Structural health monitoring (SHM) has been defined as the use of in-situ, non-destructive sensing and analysis of structural cha
145.00   Fatigue is a major issue affecting safety and quality of service in the railway industry. This book reviews key aspects of this impo
110.00   A panel of international experts in genetics, nutrition, fatty acid, cholesterol, metabolism and coronary heart disease has contri
215.00   The breakdown of food structures in the GI tract and subsequent availability of food constituents has a significant effect on foo

175.00   High temperature solid oxide fuel cell (SOFC) technology is a promising power generation option, which features high electrical
290.00   With wild stocks declining due to over-fishing, aquaculture will have a more significant role to play in meeting future demand fo
190.00   Improving the quality and safety of microwavable convenience food products is a priority for manufacturers. Development of p
180.00   In the past two decades injection molded short fibre reinforced polymers (SFRP) have become very common construction mate
290.00   Effective control of pathogens continues to be of great importance to the food industry. The first edition of Foodborne pathoge
50.00    Based on 20 years’ experience of product success and failure in healthy marketing, the Four factors of success are a practical ‘b
175.00   Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding. It overcomes some of the shortfalls of both
190.00   Enrobed and filled confectionery and bakery products (such as praline-style chocolates, confectionery bars and chocolate-coate

60.00    The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology
190.00   A ‘geopolymer’ is a solid aluminosilicate material usually formed by alkali hydroxide or alkali silicate activation of a solid precur
145.00   Accidents are generally regarded as unexpected events, which do not fall into any predictable pattern. A common assumption i
175.00   In this completely rewritten Second Edition of Trans Fatty Acids in Human Nutrition authors who are recognized international a
185.00   As consumer demands for specific attributes in their textiles increase and global competition intensifies, it is important that ind
250.00   This important book examines how structural dynamics can be applied to earthquake engineering of structures in theory and p
230.00   Processing techniques are critical to the performance of polymer products, which are used in a wide range of industries. This bo
270.00   The first edition of Handbook of Hydrocolloids provided professionals in the food industry with relevant practical information a
230.00   Antifouling coatings are essential for preventing unwanted growth of plants and animals on a ship or offshore structure’s under
50.00    The API Individual Certification Programs (ICPs) are well established worldwide in the oil, gas, and petroleum industries. This Qu
175.00   An important and growing area of the textile industry is the medical sector. The extent of the growth is due to constant improv
50.00    This fundamental and straightforward text addresses a weakness observed among present-day students, namely a lack of famil
200.00   Oral diseases can have a significant impact on self esteem and quality of life, are widespread and may be expensive to treat. Ne
175.00   Major concerns have been raised on the sustainability of construction activities, in particular the sustainability of construction m
205.00   Patients with urological disorders should greatly benefit from the recent improvements to the biomaterials used in devices and
205.00   Computer-based modelling of material properties and microstructure is a very fast growing area of research and the use of tita
60.00    Materials science for dentistry differs from all existing textbooks in the field, with the goal of insight into the way materials wor
250.00   This book together with its associated CD-ROM provides environmental managers and researchers with a system for evaluating
140.00   This book discusses genomics, proteomics, bioavailability and safety, antioxidants, life-style related diseases, chemoprevention
145.00   Fatigue behaviour of fibres is an important property and is often poorly understood. The action of fatigue in fibres and textiles
60.00    Delta Functions has now been updated, restructured and modernised into a second edition, to answer specific difficulties typic
205.00   The rise in the incidence of health problems such as reproductive disorders and testicular and breast cancer has been linked by
175.00   Foods with health-promoting properties over and beyond their nutritional value – products known as functional foods - have b
215.00   The meal is a key eating occasion, yet professionals and researchers frequently focus on single food products, rather than the c
175.00   Carpets remain an important sector for the textile industry. This comprehensive book provides an overview of recent developm
205.00   The book provides all the engineering information required for calculating the stress/strain quantities commonly used in multia
160.00   The first part of the book provides an epidemiological overview, including regional case studies from India, China and Africa. Th
90.00    As a product of the consultation experiences gained in the process of helping four mills that are running their ring frames at the
60.00    This book covers the essential aspects of textile designs and would be useful to students aspiring for a career in textile designin
190.00   Smart clothing and wearable technology is a relatively novel and emerging area within the fashion and textile industry. Part one
185.00   This book provides a review of how textile fibers can be identified, both in the context of forensic science and within the textile
200.00   As consumer demand for traditional carbonated drinks falls, the market for beverages with perceived health-promoting proper
205.00   Shellfish are a very popular and nutritious food source worldwide and their consumption has risen dramatically. Because of the
185.00   This book reviews the most important polyolefins, including polyethylene and polypropylene. This comprehensive review discu
155.00   The primary causes of wounds requiring skin replacement are severe burns and ulcers; materials must provide an effective tem
220.00   Understanding of the scientific basis of quality attributes in meat is becoming more advanced, providing more effective approa
175.00   Corrosion control in the aerospace industry is an issue that has always been important, but is becoming more so with the agein
220.00   The response of cells to biomaterials is critical in medical devices. Specific cell responses may be beneficial – encouraging adhes
180.00   Advanced research into wool science is leading to a better understanding of the properties of wool. Consequently wool is incre
230.00   The world’s ageing population is increasing. Food professionals will have to address the needs of older generations more closel
205.00   Weld cracks are unacceptable defects that can compromise the integrity of welded structures. Most cracks are the result of sol
200.00   With an increase in textile manufacturers relocating to developing countries with cheaper overheads the manufacturers that re
180.00   Shape memory metals are suitable for a wide range of biomedical devices including applications in dentistry, bone repair, urolo
205.00   This authoritative reference work provides a comprehensive review of the materials used in hydrogen fuel cells, which are pred
230.00   Delamination is a phenomenon that is of critical importance to the composite industry. It involves a breakdown in the bond bet
205.00   In-service structural systems are subject to age-related deterioration, leading to concerns regarding maintenance, health and sa
180.00   The demands placed on automotive textiles have increased significantly in recent years. This book provides a comprehensive re
190.00   Bone cements are widely used in orthopaedic applications to bond an implant to existing bone and remodelling following bone
160.00   Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fibre reinforced polymer
250.00   Written by one of the world’s leading authorities in the field, this book updates what has been a standard text since the first ed
160.00   Textile structure and mechanics are fundamental to the way textiles are designed, manufactured, tested and used. This importa
155.00   Biologically inspired textiles are those that take ideas from nature and implement them in new fibres and fabrics. Biomimetics a
205.00   The next several years will see an emergence of hydrogen fuel cells as an alternative energy option in both transportation and d
185.00   Bioresorbable materials can be employed to provide significant advances in drug delivery systems and medical implants. The ra
220.00   The key requirements for chilled food products are good quality and microbiological safety at the point of consumption. The fir
110.00   Major operational elements of the world air transport system are examined in this important book, which provides an invaluab
180.00   This comprehensive collection, the proceedings of an international symposium held in Seoul, Korea, summarises some of the m
220.00   This book is an important updated addition to Horrocks and Price’s Fire retardant materials. It provides the reader with a comp
185.00   The textile industry is becoming an increasingly competitive environment. Differentiating products is therefore important and t
155.00   This pioneering book presents exciting opportunities for the creation of new textiles through the use of three dimensional texti

200.00   This important book addresses the highly topical subject of composite ageing. An increasing proportion of composites are being
220.00   Fish farming enables greater control of product quality, but there have been concerns about the levels of contaminants found i
240.00   Natural origin biopolymers are attractive for use in biomedical applications, partly due to their biocompatibility and degradatio
160.00   This volume contains a selection of papers presented at the Nutrition and Fitness Conference in Shanghai, held in November 20
160.00   This publication focuses on the differences of humans as infants and children with respect to nutritional needs and responses to
120.00   The book is intended to help non-specialists and specialists alike understand the nature of fats and the appropriate analytical a
200.00   This book is concerned with the theoretical principles of hydrometallurgical processes and engineering aspects. The hydrometa
215.00   Food packaging performs an essential function, but packaging materials can have a negative impact on the environment. This c
185.00   The book discusses the mechanical and in-service properties, the relevant manufacturing techniques and aspects related to ext

190.00   This important book provides a comprehensive understanding of the principles underlying the technology of organic coatings a
230.00   Increasing numbers of joint revision and replacement operations drives the demand for improved prostheses. This book compr
290.00   Effective management of water and energy use in food processing is essential, not least for legislative compliance and cost redu
205.00   One of the major hurdles to widespread acceptance of natural fibre composites is a lack of information about their mechanical
210.00   Polyester and polyamide continue to account for the vast amount of synthetic fibre usage. Current developments are leading to
190.00   Developments in technology now enable the production of in-pack processed foods with improved sensory quality, as well as n
180.00   Developments in the formulation and reinforcement of concrete are of great topical interest to the construction industry world
190.00   The action of friction in fibers and textiles plays a major role in product performance, from the generation of the fiber through
150.00   Phospholipid Technology and Applications should be of special value to technologists developing food and cosmetics products,
150.00   Mineral wool has a unique range of properties combining high thermal resistance with long-term stability. It is made from molt
215.00   High-temperature corrosion is a major problem affecting sectors such as the power generation, aerospace and metal-working in
180.00   Wood-polymer composites are becoming more accepted in advanced engineering applications. The latest generation of wood-p
175.00   Recent technologies are dramatically changing the production of apparel. This technology is providing the industry with opport
180.00   Textiles and garments provide the barrier between the soldier and the surrounding environment. As the battlefield becomes in
50.00    Health and safety issues now impose upon almost every part of business life. The system of enforcement is managed and imple
210.00   Consumer health and well-being may potentially be improved by consumption of health promoting, safe seafood products of h
150.00   Industrial Manufacture of Snack Foods is destined to become the essential resource for the industry, particularly for technician
185.00   Hydroforming is a process where fluid pressure is applied to ductile metallic blanks (either tubes or sheet metal) to form compo
155.00   Combined cycle technology is used to generate power at one of the highest levels of efficiency of conventional power plants. It
205.00   Consumers are advised to increase fruit and vegetable consumption, but the health effects of increased intake are not fully und
160.00   Welding processes are being increasingly automated and are operating at higher speeds. Monitoring the quality of welds produ
215.00   High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas tu
95.00    These proceedings cover the fields of different materials and fatigue of welded joints, thin-walled structures,tubular structures,
95.00    An industrial book that analyses various theoretical problems, optimizes numerical applications and addresses industrial proble
100.00   This review is of interest to everyone who works with or studies polyamides. It is accompanied by around 400 abstracts compile
160.00   Fortified foods and food supplements remain popular with today’s health-conscious consumers and the range of bioactives add
240.00   Many important advances in technology have been associated with nanotechnology and the miniaturization of components, de
50.00    Pipeline engineering requires an understanding of a wide range of topics. Operators must take into account numerous pipeline
205.00   Dental biomaterials: Imaging, testing and modelling focuses on the techniques required to undertake research in dental biomat
235.00   Bioceramics are potentially suitable for a wide range of important applications within the medical device industry. Bioceramics
150.00   Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels fabricated from carbon manganese, low a
280.00   This comprehensive book covers recent developments in advanced dielectric, piezoelectric and ferroelectric materials. It presen
220.00   Creep resistant steels must be reliable over very long periods of time, at high temperatures and in severe environments. Their m
150.00   This book provides design engineers, toolmakers, moulding technicians and production engineers with an in depth guide to the
70.00    Essentials of scientific computing is as self-contained as possible and considers a variety of methods for each type of problem d
175.00   Consumer acceptance of food is highly dependent on flavour. This important collection reviews the chemical basis of fruit and v
65.00    This unique text blends together state estimation and chemometrics for the application of advanced data-processing technique
160.00   The papers presented in this publication thus focus on the impact of perinatal growth, nutrition, environmental microflora, and
220.00   This book provides a comprehensive analysis of the techniques of corrosion monitoring. It includes practical applications and ca
160.00   A comprehensive reference on the science and technology of belt conveyors, aimed at professionals and higher level students i
190.00   The Scientific Group Thermodata Europe (SGTE) is a consortium involved in the development and application of thermodynami
190.00   Active ingredients in foods must remain fully functional for as long as necessary and be transported and discharged appropriate
50.00    This student friendly workbook addresses mathematical topics using SONG - a combination of Symbolic, Oral, Numerical and Gr
30.00
35.00    This one-semester course text introduces basic principles of thermodynamics and considers a variety of applications in science
60.00
60.00    This advanced undergraduate and graduate text has now been revised and updated to cover the basic principles and applicatio
190.00   Product development is vital to the food industry but a successful outcome is often elusive. Many publications cover product de
115.00   This book presents the available information on the eternal triangle of plastics and rubber and health, to enable a better under
205.00   Cereal grains and their fractions contain many health-protecting compounds, such as phytochemicals, vitamins and indigestible
100.00   This report provides a succinct presentation of the initial and recent developments in the field of nucleating agents, on which fu
215.00   This important book provides operators of industrial gas turbines with a review of the principles of gas turbine operation and h
220.00   Tissue engineering is rapidly developing as a technique for the repair and regeneration of diseased tissue in the body. This auth
190.00   Pulsed electric field (PEF) food processing is a novel, non-thermal preservation method that has the potential to produce foods
205.00   Nanotechnology is revolutionising the world of materials. This important book reviews its impact in developing a new generatio
115.00   This book helps to answer questions related to the design of nanocomposites by controlling the processing technology and stru
100.00   This report has attempted to cover all of the coatings and inks products used in food contact scenarios. Hence, direct and non-d
175.00   The food industry is constantly seeking advanced technologies to produce value-added, nutritionally-balanced products for con
185.00   The cold spray process produces extremely dense, oxide-free coatings that make it ideal in such diverse applications as the con
185.00   Improvements in material strength, weight and flexibility have had a profound effect on the equipment used in many areas of s
240.00   Awareness of the interrelationship between the nanoscopic, microscopic and macroscopic features of foods and their bulk phys
185.00   The Stirling air engine is the core component of combined heat and power systems, and is becoming an important sustainable t
155.00   There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important vol
155.00   Biomedical polymers reviews the structure, processing and properties of biomedical polymers. It discusses the various groups o
215.00   HCCI / CAI has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and imp
100.00   Over the last three decades, the use of PMC, has increased tremendously and this dramatic growth is expected to continue in t
85.00    This book continues the ICTMA tradition of influencing teaching and learning in the application of mathematical modelling. Eac
205.00   With increased consumer pressure to reduce the use of pesticides, fertilizers, veterinary medicines and growth promoters in fo
155.00   This book begins by discussing the physics of welding before going on to review modelling methods and options as well as valid
185.00   This comprehensive book on durability of FRP composites will make it easier for the practicing civil engineer and designer to use
140.00   This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and con
175.00   The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion.
50.00    An informative and useful account of complex numbers that includes historical anecdotes, ideas for further research, outlines o
185.00   Concrete and other cement-based composites are by far the most widely used man-made construction materials in the world. H
180.00   Conceptualized as an introductory publication providing a general overview as well as specific examples of the applications of c

215.00   No matter how innovative or technologically advanced a new or reformulated food product may be, it will only be a success if i
160.00   This book provides pediatricians, neonatologists, nutritionists and dieticians with a complete update on what is known and wha
185.00   Arranged in practical question and answer format, Cheese problems solved provides responses to 200 or so of the most commo
185.00   Stress corrosion cracking is a major problem in light water nuclear reactors, whether pressurised water reactors (PWRs) or boili
50.00    In this book Jeremy Dunning-Davies deals with the influence that “conventional wisdom” has on science, scientific research and
160.00   Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles
175.00   Ingredients that improve the aroma and taste of foods have always played an important role in food formulation. With increasi
60.00    This course text fills a gap for first-year graduate-level students reading applied functional analysis or advanced engineering ana
155.00   The field of antioxidants has expanded over the last six decades into a wide variety of multi-disciplinary areas that impact foods
155.00   Unlike the many other books on omega-3 fatty acids, Long-Chain Omega-3 Specialty Oils is not concerned with nutrition but ins
60.00    This report covers the synthesis of polyimides from chloral and trinitrotoluene and reviews the production of new types of poly
160.00   Adequate nutrition is especially important during infancy and childhood, where even short periods of malnutrition have long-la
160.00   Prevention of coronary heart disease recommends new directions of lipid nutrition for the primary and secondary prevention o
205.00   Dairy products already constitute one of the most important types of functional food and with further knowledge about the he
205.00   This authoritative reference work provides a detailed study of recent developments in artificial cells, cell engineering and cell th
185.00   The survival and success of many future industries relies heavily on engineered materials and products with improved performa
155.00   Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cl
175.00   Textile dyeing produces significant levels of waste which is harmful to the environment and dangerous to health if not properly
185.00   In the Western world, obesity has risen at an epidemic rate in recent years. The scale of the problem is immense, with obesity p
215.00   Cheeses are complex microbial ecosystems and aspects of their flavour development remain poorly understood. The biochemis
70.00    Good data mining practice for business intelligence (the art of turning raw software into meaningful information) is demonstrat
155.00   There has long been a need for effective methods of measuring corrosion within light water nuclear reactors. This important vo
180.00   Shape memory polymers are a huge innovation which could transform the future of the textile and garment industry. Imagine n
70.00    The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochem
185.00   Most clothing sold in the world today is ready-to-wear, and production depends on the development and use of sizing systems.
60.00    In recent years, there have been considerable developments in techniques for the investigation and utilisation of enzymes. Wit
220.00   Millions of tonnes of waste are produced every year by the agri-food industry. Disposal by landfill or incineration is already exp
270.00   In its first edition, this book quickly established itself as the essential reference tool in its field for both industry professionals an
190.00   With its distinguished editors and contributors,Corrosion of metallic heritage artefacts improves our understanding of long term
180.00   While predictive microbiology has made a major contribution to food safety, there remain many uncertainties, e.g. growing evi
120.00   This book is designed as a practical text for use in the laboratories of the plastic producer and user industries and by others suc
155.00   The effective investigation of corrosion requires the use of methods that can probe material surfaces at the atomic or molecula
185.00   Plasma technology provides a versatile and environmentally-friendly way of treating textile surfaces, for example in improving w
185.00   Medical and smart textiles are two of the most exciting areas of research in textiles. This book combines the two by looking at h
250.00   This important book covers the nature and history of gold, the geology of gold ore deposits, gold deposition in the weathering e
200.00   This second of two volumes on plated structures reviews dynamics, particularly vibration. Chapters review the behaviour of com
185.00   Eating too much salt is a significant risk factor in developing high blood pressure, a condition often described as a ‘silent killer’ a
155.00   This volume contains the proceedings of the Ecotextiles 2004 Conference held at the University of Bolton. It includes expert rev
185.00   When forming composite materials with textiles there is always a degree of error when draping a fabric over the mould and add
120.00   Now in its ninth year, this international conference is firmly established as Europe’s premier event for the thermoplastic elastom
120.00   This conference saw presentations from all parts of the electronics industry’s materials supply chain, from raw materials to finis
160.00   This book aims to illustrate that the combination of a balanced ratio of omega-6: omega-3 fatty acids and antioxidants, along w
60.00    As in the successful first edition, this book provides straightforward information on plastic materials and technology, including t
220.00   It is very important for food businesses, scientists and policy makers to understand consumers of food products: in the case of b
205.00   Most food sold is packaged and although packaging has many positive benefits, constituents from it may migrate into the food,
210.00   Although cotton has been overtaken by some manmade fibres in its share of the textiles market, the increase in demand for su
210.00   Given their rapid development and diverse markets, understanding and developing nonwovens is becoming increasingly import
185.00   Geosynthetics are essential to civil engineering and have a multitude of applications. The first part of the book looks at design p
70.00    This report describes the reference material and procedural guidelines required to use this technique effectively. STM-users are
70.00    Using reference electrodes to monitor the electrochemical potential of steel reinforcement in concrete is a well established tec

185.00   Microbiological analysis has long been used to monitor the microbial quality and safety of red meat, poultry and eggs, whether
185.00   Corrosion of metal within reinforced concrete is one of the most important problems facing the construction industry. Key rese
205.00   Over-exploitation and declining fish stocks are creating an urgent need for better utilisation of seafood by-products. Currently a
185.00   Controlling allergens in food is a matter of increasing importance, especially in the light of recent legislation. Effective control o
160.00   Elastomeric components are widely used in engineering. Increasing demands are placed on them to withstand hostile condition
210.00   The transfer of heat and moisture through textiles is vital to the manufacture and design of clothing, technical and protective te
220.00   Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design a
205.00   Assessing the risks posed to consumers by acrylamide and other potentially carcinogenic and genotoxic compounds is a priority
80.00    This issue of Textile Progress reviews developments in polymer composites which are increasingly gaining importance as substit
190.00   This book reviews important issues in the relationship between consumers and foodborne bacteria, viruses and parasites. Part
175.00   This book introduces the range of advanced welding techniques currently in use. It covers gas tungsten arc welding (GTAW), ga
215.00   Based on over 20 years of experience, this is a comprehensive one-volume reference on the main types of meat products and th
210.00   Any oil or fat should have the optimum physical, chemical, and nutritional properties dictated by its end use. Modification of na
175.00   Medical modelling is an increasingly important tool in surgery and rehabilitative medicine. This authoritative book describes the

130.00   Provides practical guidance on the application of the structural hot-spot stress approach to promote wider use of the approach
70.00    Lawrie’s meat science has established itself as a standard work for both students and professionals in the meat industry. Its bas
205.00   Fatigue is a mechanism of failure that involves the formation of cracks under the action of different stresses. Stresses can be a w
210.00   The third volume of this comprehensive and authoritative reference continues coverage of key herbs and spices for the food ind
175.00   The intimate apparel business is undergoing major technological change. New measurement and design techniques, combined
190.00   This book comprehensively describes the the brewing of beer, from raw materials supply, through processing, to the final produ
360.00   This report provides a complete picture of the varied use of polymers in the manufacture of electronic components. It highlight
205.00   Intelligent textiles and clothing can be defined as those which react to exterior or physiological stimuli. This important book brin
185.00   Consumer acceptance or rejection of a food can often be due to its taste. Sweet taste is especially attractive to the consumer a
100.00   This Report comprises a concise, expert review, supported by an extensive bibliography compiled from the Rapra Abstracts dat
180.00   Demonstrating safety for the application of ever increasingly complex technologies is always a formidable task. In the event of a
200.00   Ballistic composites need to be lightweight and durable as well as exhibiting high impact resistance and damage tolerance. This
110.00   The packaging material has to both preserve the food and to protect it from deterioration, outside contamination or damage d
360.00   Four main classes of biodegradable polymers are analysed in this report, polylactic acid (PLA), starch-based polymers, synthetic
185.00   The holistic view of powertrain development that includes engine, transmission and driveline is now well accepted. Current tren
100.00   A revised edition of this classic reference work. Updated to reflect recent advances in food science (for example an increased nu
160.00   Those interested in an integrated approach to the identification of new and health beneficial foods will find this book a valuable
160.00   In this volume, world-renowned specialists review scientific information and recommendations for protein and energy requirem
160.00   Conceding that the optimal diet for diabetes has yet to be defined and that nutrition and lifestyle management must be individ
120.00   Medical technology is advancing rapidly and materials need to be developed to meet the demands. This 5th international confe
120.00   These proceedings from Rapra’s first international conference on Silicone Elastomers will be of interest to rubber manufacturer
155.00   In Lipids: Structure, physical properties and functionality, Professors Kåre Larsson, Peter Quinn, Kiyotaka Sato and Fredrik Tiber
160.00   The 57th Nestlé Pediatric Nutrition Workshop assembled a panel of leading international scientists in order to assess and exten
185.00   Building on the success of an established series of successful conferences held every four years since 1978, 8th International Co
215.00   Developments such as the increasing globalisation of the food industry, constant innovations in technologies and products, and
190.00   This authoritative book presents an overview of research in, and applications for, wear protective coatings. It concentrates on t
180.00   Gas metal arc welding (GMAW) also referred to as MIG (metal inert gas) is one of the key processes in industrial manufacturing
205.00   Steel plated structures are used in a variety of marine and land-based applications, such as ships, off-shore platforms, power an
60.00    This third edition of what has become a modern classic presents a lively overview of Materials Science which is ideal for studen
190.00   At present the textile industry produces the majority of its 34 billion square yards of printed textile fabric by screen printing. Ho
200.00   Biomechanical engineering of textiles and clothing addresses the issues of designing and producing textiles and clothing for opt
185.00   In recent decades, material development in response to the call for more durable infrastructures has led to many exciting adva
190.00   Clothing biosensory engineering is a systematic and integrative way of translating consumers’ biological and sensory responses
990.00   First published in looseleaf format in 1993, Base Metals Handbook has been described as the bible of the metals trading commu
120.00   Manufacturing with plastics often involves a bonding step from packaging, electronic and medical devices to large scale automo
130.00   This book describes the types of techniques now available to the polymer chemist and technician, and discusses their capabiliti
175.00   Direct strip casting is an important new technology in steelmaking. By eliminating rolling and reheating, it has both reduced cos
155.00   Developed in the 1960s, the Chorleywood Bread Process (CBP) marked a revolution in bread making. The CBP develops optimu
230.00   Action by microorganisms is a common means of food spoilage and ensuring that a product has a suitable shelf-life is a critical f
175.00   An increasing amount of waste is generated each year from textiles (including carpets and clothing) and their production. For e
185.00   The flavour of a food is one of its most important qualities. Edited by two leading authorities in the field, and with a distinguish
175.00   In the light of recent legislation and a number of food safety incidents, traceability of food products back from the consumer to
95.00    This book forms the first part of a complete MSc course in an area that is fundamental to the continuing revolution in informati

185.00   Nanotechnology is an area of science and technology where dimensions and tolerances in the range of 0.1nm to 100nm play a
220.00   Polymer nanocomposites are a class of reinforced polymers with low quantities of nanometric-sized clay particles which give th
120.00   This fifth international conference started with a session on rubber to metal bonding with an overview by R Del Vecchio on com
205.00   This authorative reference work provides a comprehensive source of information for regulators, researchers and all those conc
175.00   Managing colour from the design stage to the finished product can be a difficult activity as colour perception is subjective and c
180.00   Bearings are widely used in rotating machines. Understanding the factors affecting their reliability and service life is essential in
210.00   Dietary fats have long been recognised as having a major impact on health, negative in the case of consumers' excessive intake
140.00   Douglas Fritz has many years of experience in the chewing gum sector and this essential book contains everything readers need
235.00   Ceramic matrix composites (CMCs) combine a range of properties such as high hardness, low density and resistance to high tem
190.00   Allergens pose a serious risk to consumers, making effective detection methods a priority for the food industry. Bringing togeth
160.00   Laser shock peening (LSP) is a relatively new surface treatment for metallic materials. LSP is a process to induce compressive res
60.00    This book presents the basics of blow moulding as well as the latest state-of-the-art and science of the industry. A key feature is
140.00   Engineers employ shear connections - riveted and bolted butt and lap joints - in a wide range of structures and machines. Ordin
115.00   The title is intended to provide an insight into the uses of polymers within the construction industry. It describes the conception
200.00   With increasing concern about the effect the textile industry is having on the environment, more and more textile researchers,
210.00   Medical textiles and biomaterials are a significant and increasingly important part of the technical textiles industry. They cover
95.00    This authoritative text (the second part of a complete MSc course) provides mathematical methods required to describe images
155.00   This is the third volume in a series which brings together a selection of the currently available lectures based on broad subject g
200.00   This multiauthored collection addresses the effect of mechanical and physical properties on the way a fabric feels. It begins wit
235.00   Complementing the highly successful Hygiene in food processing, this book reviews recent research on improving hygiene in foo
200.00   The term electroceramic is used to describe ceramic materials that have been specially formulated with specific electrical, magn
260.00   In today’s climate there is an increasing requirement for protective textiles, whether for personal protection, protection agains
805.00   Cotton Trading Manual (CTM) is the first work to provide a comprehensive reference source to the conduct of the complex inte
210.00   Obesity is a global epidemic, with large proportions of adults and children overweight or obese in many developed and develop
190.00   Measurement techniques for characterisation of residual stress and distortion have improved significantly. More importantly th
215.00   An applied text on the fundamentals of metallurgy that will appeal to both the academic and steel-producing markets. Overall e
200.00   Currently surface patterning is achieved by means of optical lithographic techniques but with industry moving towards the fabr
190.00   Developments in high-technology areas have significantly transformed the welding industry. Automation, computers, process c
185.00   Chemical testing of textiles provides a full overview of the chemical testing area for both academics and industry. Providing a co
60.00    Biomaterials are materials and devices that are used to repair, replace or augment the living tissues and organs of the human b
180.00   The safety, maintenance and repair of bridges and buildings depend on effective inspection and monitoring techniques. These m
180.00   Analytical electrochemistry in textiles gives an overview of the synergy between the fields of electrochemistry and textiles. Kno
210.00   This important book focuses on the fundamental understanding of composite materials at the microscopic scale, from designin
185.00   The technical developments in the sports clothing industry has resulted in the use of functional textiles for highly-specialised pe
190.00   This authoritative book provides an introductory text on the science and technology of materials used in automotive engines. It
220.00   Consumers are increasingly demanding 'fresh' foods with fewer preservatives. Manufacturers have responded by developing ne
215.00   Consumers’ expectations about the safety of products such as poultry meat and eggs have never been higher. The need to impr
70.00    The Textile Progress monograph series provides a critical and comprehensive examination of the origination and application of
235.00   It is widely recognised that food safety depends on effective intervention at all stages in the food chain, including the productio
200.00   This book brings together the design, manufacture and applications of textile composites. The term 'textile composites' is often
215.00   Pathogens respond dynamically to their environment. Understanding pathogen behaviour is critical both because of evidence o
185.00   The impact of traditional thermal processing on the sensory quality of food has led to an interest in alternative technologies. A
155.00   There is much to be gained from the study of catastrophes. Likewise the records of accidents in industry and transport are of gr
250.00   This book combines three fundamental areas of interest to the science and engineering community, these being material scienc
100.00   This report examines the use of biocides in plastics with reference to material types and application requirements. The common
180.00   In his definitive book on lipid oxidation, Professor Frankel’s main objective is to develop the background necessary for a better
160.00   A comprehensive and highly valuable source of knowledge for all professionals interested in the underlying causes of today's m

115.00   This handbook is designed to provide a wealth of information on the use of plastics in construction. The chapters are all written
160.00   This workshop focused on the effects of maternal nutrition on fetal growth, metabolic programming, energy and nutrient requi
160.00   This book is a synthesis of state-of-the-art knowledge and expertise in this field of research and will be of high value for all med
160.00   This book focuses on a crucial moment in human life: the introduction of solid foods to the diet during late infancy and early ch
160.00   Recent studies of vascular biology using molecular biology techniques have started to reveal a previously unsuspected complex
145.00   Provides detailed critical reviews of the relationship between mood changes and the amount of protein, amino acids, carbohyd

160.00   This book provides a solid basis for the planning of future projects in nutrition and health and should be of great interest to all p
115.00   This book discusses the evaluation of candidate materials and components for compatibility with the different sterilisation met
250.00   This book presents our current level of understanding on the nature of a biomaterial surface, the adaptive response of the biom
185.00   This book reflects the ongoing interest in the production of sophisticated specialist textiles. These hi-tech fibres will have huge r
185.00   This study focuses on research on the performance of a wide range of materials used in the construction of structures particula
210.00   This volume contains the proceedings of the Cellucon Trust/International Atomic Energy Agency meeting on the use of ionising
205.00   The vast majority of plastic products are made from petroleum-based synthetic polymers that do not degrade in a landfill or in
120.00   There is an exciting mix in these proceedings from both material suppliers and end users, who have discussed test and formulat
185.00   Building electronics into clothing is a major new concept, which opens up a whole array of multi-functional, wearable electro-te
200.00   Environmental concerns have regenerated interest in the use of natural fibres for a much wider variety of products, including h
50.00    This undergraduate text distils the wisdom of an experienced teacher and yields, to the mutual advantage of students and their
205.00   This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and
95.00    This contemporary book provides an up-to-date review on the application of ISO and AWS standards and a comparison betwee
100.00   This review has been written as a practical approach to bonding various kinds of elastomers to substrates such as steel and plas
175.00   In this authoritative book the fundamental aspects of corrosion in concrete are analysed in detail. It provides an overview of cu
235.00   This comprehensive collection from one of the leading conferences in its field summarises some of the most important research

65.00    Explaining and comparing the various standard types of generalised functions which have been developed during the 20th Cent
130.00   Handbook of biodegradable polymers is a complete guide to the subject of biodegradable polymers and is ideal for those new t
60.00    This sound introduction to classical and modern control theory concentrates on fundamental concepts. Employing the minimum
175.00   A recent addition to the Woodhead Fibre Science Series, which has already covered wool, silk and luxury fibres, regenerated ce
190.00   Fabric mechanics are fundamental to the way textiles are designed, tested and manufactured and underpin the way woven fab
60.00    This postgraduate, comprehensive reference and source book introduces readers to tides, tidal currents, storm surges and sea

120.00   This two-day conference focused on the use of polymers (including thermoplastics, thermosets, rubbers, reinforced plastics and
270.00   Brewing: Science and practice updates and revises the previous work of this distinguished team of authors, producing what is th
175.00   This comprehensive book provides a critical appreciation of the technological developments and scientific understanding relate
185.00   There is an increasing movement of scientists and engineers dedicated to minimising the environmental impact of polymer com
210.00   Cardiovascular disease and diabetes pose a serious and growing risk to the health of the population in the developed world. Th
220.00   This wide-ranging text sums up the wealth of recent research on assessing the risks from pesticides, veterinary and other residu
175.00   The role of the textile finisher has become increasingly demanding and now requires a careful balance between the compatibili
215.00   Starch is both a major component of plant foods and an important ingredient for the food industry. Starch in food reviews starc
205.00   Mycotoxins are toxic compounds produced by fungi. They are produced in foods of plant origin and pose a significant contamin
210.00   Thermal technologies must ensure the safety of food without compromising its quality. This important book summarises key re
155.00   The alloy tree is a user-friendly, logical guide to the major metal alloys and their variants. Introductory chapters present a diagr
185.00   The world sugar market focuses on identifying, describing and assessing the key industry drivers and their future potential impa
235.00   This important collection reviews the role of functional foods in helping to prevent a number of degenerative conditions, from o
155.00   Bioactive Lipids brings together an international team of authors to discuss the nomenclature, structures, biochemistry, pharma
160.00   Written by leading investigators and clinicians, this publication begins with a review of the epidemiology of micronutrient defic
130.00   In the 21st century polyester has taken over from cotton as the most heavily used fibre. Polypropylene has moved ahead too, w
160.00   This workshop was held to consider in depth the environmental factors that influence the changing pattern of worldwide childh
145.00   This book will be an interesting source of knowledge for internists, family physicians, pediatricians, dieticians, endocrinologists,
100.00   The book examines the types of adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly w
120.00   There is extensive data in this text including numerous tables and graphs illustrating property changes, processing attributes, ch
120.00   Topics covered at Polymer Bonding 2004 included: latest material advances, new processing technologies, analysis of bonding t
190.00   This important book provides an authoritative review of the key issues in poultry processing. Part one discusses good practice d
355.00   The Asian-Australasian Association for Composite Materials (AACM) has been playing a leading role in the field of composite sci

160.00   This book provides the latest data on genetic variation and dietary response, nutrients and gene expression, and the contributio
200.00   The shelf-life of a product is critical in determining both its quality and profitability. This important collection reviews the key fa
60.00    This modern introduction to infinitesimal methods is a translation of the book Métodos Infinitesimais de Análise Matemática by
70.00    This authoritative book covers manufacturing methods for and the key properties of these important steels and their alloys.
85.00    Staphylococcus aureus is resident in skin and nasal membranes with a formidable pathogenic potential to cause a variety of com
240.00   Following the success of ACIC 2002, this is the 2nd International Conference focused on the application and further exploitation
220.00   Proteins are essential dietary components and have a significant effect on food quality. Edited by a leading expert in the field a
205.00   Fibre rope has undergone dramatic technological changes over the last few decades with such advances as the development of
180.00   A foreign body is any undesirable solid object in a food. Foreign bodies range from external matter such as metal fragments or
210.00   Texture is one of the most important attributes used by consumers to assess food quality. With its distinguished editor and inte
205.00   Together with its companion volumes, Handbook of herbs and spices: Volume 2 provides a comprehensive and authoritative co
100.00   This review provides a clear overview of the state-of-the-art of flame retardancy for plastics. It highlights the new development
190.00   This volume discusses methods of analysis for 30 major additives where methods are incomplete or deficient. In each case the a
160.00   Today it is as essential as ever to design, develop and produce saleable and commercially sound woven fabrics within considera
70.00    Exhaustive, authoritative and comprehensive, using 160 statistical tables, this book addresses the fundamental structure of ma
100.00   This manual contains step-by-step procedures for performing successful underwater wet-stick welding operations. It will aid all
60.00     This undergraduate and postgraduate text will familiarise readers with interval arithmetic and related tools to gain reliable and
240.00    This major handbook is the first authoritative survey of current knowledge of fatigue behaviour of composites. It deals in detail
205.00    This important study focuses on the way in which structures and materials can be best designed to absorb kinetic energy in a co
210.00    Extending the shelf-life of foods whilst maintaining safety and quality is a critical issue for the food industry. As a result there ha
210.00    With recent problems such as the use of genetically modified ingredients and BSE, the need to trace and authenticate the conte
215.00    The International Symposium in Brittle Matrix Composites October 13-15, 2003 covers a wide spectrum of topics including cem
1260.00   This market survey provides a detailed and independent analysis of 184 Indian foundries offering specialised casting and foundr
175.00    With increasing regulation and consumer pressure, the food industry needs to ensure that its production methods are sustaina
190.00    With the increasingly-important requirement for reducing pollution in textile production, the use of enzymes in the chemical pr
130.00    Sausage manufacture: Principles and practice provides a concise and authoritative guide to manufacturing high-quality product
215.00    Edited by one of the world’s leading authorities in the field, and with a distinguished international team of contributors, Bread
180.00    Structures often deteriorate because not enough attention is given during the design stage. Designing for durability is often left
190.00    With its high volumes of production, the food industry has an urgent need for instrumentation that can be used on-line and wh
215.00    This important and wide-reaching study provides a comprehensive guide to the implementation of sustainable transport initiat
220.00    This book examines recent developments in modern arc welding. The book is essentially divided into five main parts. The first p
210.00    With its distinguished international team of contributors, Dairy processing summarises key developments in the field and how t
185.00    The rapid growth in seafood trade in the past three decades has created a truly global market for fish. Written by one of the wo
200.00    Drawing on the expertise of the prestigious European Hygienic Equipment Design Group (EHEDG) and other experts in the field
180.00    The future of car manufacturing may be very different to the current practice of large scale, large assembly plant construction m
200.00    Improvements in materials technology have produced a significant impact on sporting performance in recent years. The relatio
205.00    Written by one of the world's leading experts, this handbook is an authoritative and comprehensive guide to textile yarn manu
70.00     This handbook is a concise, explanatory textbook for the main commercially significant and commonly used welding processes.
200.00    Understanding and controlling the texture of semi-solid foods such as yoghurt and ice cream is a complex process. With a distin
180.00    This volume has brought together a number of authors who are expert in their particular field. The information in each chapter
85.00     This book records the proceedings of the Wind Over Waves conference of the Institute of Mathematics and its applications at C
60.00     This text approaches integration via measure theory as opposed to measure theory via integration, an approach which makes it
185.00    Consumers demand food products with fewer synthetic additives but increased safety and shelf-life. These demands have incre
190.00    Methods for detecting pathogens need to balance accuracy, specificity and speed. There have been major advances in techniqu
210.00    With its distinguished international team of contributors, Novel food packaging techniques summarises the key developments i
180.00    This comprehensive book examines the effects that all phases of textile production and use have on the environment, from gro
160.00    Results from research provide data on the composition of indigenous plants from various areas of the world and show that con
65.00     Mathematical modelling is often spoken of as a way of life, referring to habits of mind and to dependence on the power of mat
160.00    A complete manual on nutritional support for ICU patients, the book, written by internationally renowned specialists, addresse
175.00    Fat is the most expensive component in confectionery such as chocolate. It may comprise cocoa butter, milk fat, palm oil, lauric
160.00    The active ingredients and components of functional foods and nutraceuticals often include lipids. This is the first book to addre
160.00    This publication, written by leading investigators and clinicians, offers a review of micronutrient requirements and the assessme
160.00    Improving the dietary ratio by decreasing the omega–6 fatty acids and increasing the omega–3 fatty acids is essential for brain
170.00    The Advances in Lipid Methodology series was launched and edited by William W. Christie. Now, after a break of six years and w
185.00    Phytochemicals are non-nutritive components that provide plants with colour, flavour and toxicity to pests. There is now a grow
190.00    Yeasts play a crucial role in the sensory quality of a wide range of foods. This book provides a comprehensive review of the met
65.00     The mathematical modelling movement in mathematics education at school and university level has been influencing curricula
930.00    This specialist market report on the growing denim industries of China and Hong Kong is designed to complement and elaborat
1260.00   This important market research report and its companion volume, The China and Hong Kong denim industry together form a un
180.00    Taints and off-flavours are a major problem for the food industry. Part one of this important collection reviews the major cause
60.00     This practical introduction encapsulates the entire content of teaching material for UK honours degree courses in mathematics,
200.00    Dairy products constitute one of the most important types of functional food. Edited by two of the leading authorities in this ar
180.00    The importance of local programmes in driving sustainable development has been enshrined in Local Agenda 21, arguably the m
180.00    Some of the newest and most exciting developments in functional foods are products that claim to influence mood and enhanc
540.00    With various crises experienced in the meat supply chain in the UK and elsewhere, seldom has the international meat industry
130.00    Water recycling presents a global challenge to the textile wet processing industry, which, like many industries using large volum
80.00     This book introduces the reader to all the technical considerations that are important in textile printing. At the same time the a
360.00    This technical market report highlights the work on flame retardants by different companies and for different resins; it describe
150.00   This title deals with the computational simulation of temperature fields, residual stresses and distortion occuring during and aft
60.00    Dr Smith here presents essential mathematical and computational ideas of network optimisation for senior undergraduate and
85.00    Emphasises 3-dimensional elasticity, concisely covering this important subject by filling the gap between a mathematical and en
60.00    This updated version of Practical Sonochemistry for advanced students and teachers in chemistry and chemical engineering con
190.00   The first edition of Japanese financial markets established itself as a standard work on one of the most important financial cent
215.00   This comprehensive reference work provides an overview of, and practical guide to, the various computer-aided microscopical
180.00   This comprehensive study covers all types of corrosion of austenitic stainless steel. It also covers methods for detecting corrosio
180.00   Fancy yarns are those produced with some deliberate discontinuity, introduced either into the colour or form of the article, wit
535.00   Hyaluronan and its derivatives have developed very quickly in recent years from a scientific novelty into an important new mate

85.00    International authorities here investigate recent research into the prion diseases which include scrapie of sheep, BSE the “Mad
35.00    Two experienced chemists encapsulate their knowledge and teaching experience in this succinct text, containing 63 useful diag
185.00   Microbiological risk assessment is one of the most important recent developments in improving food safety management. Edite
160.00   The welding of aluminium and its alloys is a practical user’s guide to all aspects of welding aluminium and aluminium alloys, givi
140.00   Designing a structured cabling system to ISO 11801 second edition is the first book to be published which is a commentary on t
185.00   Creating an effective policy for cycling is now an essential part of developing a sustainable transport strategy for both local and
205.00   This major collection summarises key developments in research, from improving raw meat quality and safety issues to developm
60.00    This book focuses on the changes made in building science and practice by the advent of computers. It explains many more too
65.00    An introduction to fractal geometry and the best practices in software, theoretical mathematical algorithms and analysis. With
190.00   The colour of a food is central to consumer perceptions of quality. This important collection reviews key issues in controlling co
210.00   Over the past decade there has been an explosion of research on the relationship between nutrition and health. Given the curr
200.00   Fruit and vegetables are both major food products in their own right and key ingredients in many processed foods. This book pr
180.00   The emergence of ‘minimal’ processing techniques, which have a limited impact on a food’s nutritional and sensory properties,
200.00   Edited by a leading authority on quality issues, and with a distinguished international team of contributors, this recent book sum
595.00   Written by two leading experts in the copper industry, the late John Jessop and Martin Thompson, formerly of RTZ, this additio
60.00    Lockhart and Wiseman’s crop husbandry including grassland is widely recognised as the standard introduction to its subject for
145.00   Carpet manufacture has undergone huge changes over the past few decades: a wider range of carpet fibres has become availab
110.00   In the Dictionary of textile finishing the textile engineer will find the correct technical terms for 16,000 keywords within their fie
160.00   This publication focuses on new findings regarding nutritional implications in metabolic alterations during inflammation, immun
190.00   In this book, leading experts within the industry come together to give one of the first comprehensive treatments of the science
190.00   Coating and laminating offer methods of improving and modifying the physical properties and appearance of fabrics and scope
100.00   The market for ready meals is growing, as market analysts acknowledge that an increase in fragmented family eating patterns h
745.00   The work contained in this critical review was carried out as part of the National Physical Laboratory’s MTS programme on Proc
200.00   Based on the work of the internationally-renowned Food Refrigeration and Process Engineering Research Centre (FRPERC) at th
50.00    Provides less mathematically minded students with a gentle introduction to basic mathematics and some more advanced topic
95.00    This volume addresses a number of topological themes of direct relevance to chemists. Topological concepts are now regularly
175.00   This edition of Health and safety in welding and allied processes has been revised to take into account advances in technology a
595.00   A report examining the supply and demand outlook for copper across its key producers and end-users. It provides a detailed an
595.00   This report provides a detailed overview of the market position and outlook in these two closely related metals, looking at supp
595.00   Nnamdi Anyadike provides a thorough and insightful look into the dynamics and prospects of the nickel marketplace, addressin
595.00   This report analyses the state of the aluminium market at the beginning of the 21st century, looking at the aftermath of the Mo
50.00    Mathematics; Clarifying the distinction between mathematical research and mathematics education, this book offers hundreds
95.00    Provides an introduction to more advanced ideas on the theory of structures and contains additional material that is not readil
185.00   The genetic modification of foods is one of the most significant developments in food processing, and one of the most controve
65.00    A comprehensive account of basic manifold theory for post graduate students. Contains more than 130 exercises, with helpful h
180.00   This book provides a comprehensive review of perhaps the most exciting and important area of urban planning – changing citie
200.00   The use of additives in foods remains both widespread and, for some consumers, controversial. Additives are used for a wide ra
60.00    Written by a distinguished international scientist, who has made fundamental contributions on the climatic relationship betwee
30.00    Reviews developments in the theory and practice of woven fabric structure.
70.00    Using modern technology the process of producing steel can be divided into two steps. All further steps required to produce a h
130.00   This book explores the history of and recent developments in the use of textiles in rubber composites, from the technology of y
140.00   Concentrates on the chemical characteristics of dyes and pigments, with emphasis on attempts to interpret their colouring and
220.00   Provides practical guidance on assessing the service life of plastics. It describes test procedures and extrapolation techniques to
140.00   Collects together a remarkable quantity and variety of factual information linking the application properties of auxiliary produc
30.00    This review follows on from Yarn hairiness update (Textile progress Vo. 26 No. 4) and covers the period from 1997 onwards. Sub
30.00    Covering the topics of sizing issues, anthropometric data, development of sizing systems, hosiery sizing, testing for fit and futur
60.00
60.00    Contains almost 4,000 definitions including clothing terms. The 11th Edition is a major update to earlier editions. Used through
100.00   This book presents the results of recent research on quick response.
155.00   This revision of total quality assurance brings useful up-to-date methods used to assure product and process quality of food pro
185.00   This is the first book to provide a comprehensive overview of the world trade in one of the most important of our basic foodstu
35.00    Thirty years teaching experience have been condensed into this concise introductory book on Statistical Mechanics. Ideal for se
65.00    The articles included in this book are from the ICTMA 9 conference held in Lisbon, attended by delegates from about 30 countr
210.00   A comprehensive overview of research undertaken in all aspects of cellulosic pulps, fibres and materials including the productio
200.00   Although none of the luxury fibres, including silk, is produced in large quantities, their particular and unique qualities of finenes
230.00   The proceedings of the eleventh international Cellucon conference deal with natural and synthetic polymer materials and show
185.00   This important handbook looks at how high-performance fibres are designed and manufactured and covers their capabilities an
205.00   This book covers all the major techniques including twist texturing, jet-screen texturing, false-twist process, BCF processes and
190.00   This important book provides a guide to the fundamentals and latest developments in smart technology for textiles and clothin
250.00   The first edition of this book quickly established itself as the standard reference in its field, and the second edition consolidates
90.00    This thoroughly practical book deals not only with the textile design process itself but also with the development and day-to-da
60.00    Product development, from refining an established product range to developing completely new products, is the lifeblood of th
100.00   Microencapsulation is a useful technique in protecting the integrity of food ingredients such as flavours, vitamins, salts and wa
205.00   Herbs and spices are among the most versatile and widely used ingredients in food processing. As well as their traditional role i
185.00   Thermoplastics, being non-linear viscoelastic, impose constraints on testing which are absent in elastic and plastic materials. En
120.00   Food refrigeration is one of the most important technologies for extending the shelf life and preserving the quality and safety o
180.00   Wood and wood products are essential to large areas of the world economy, yet until now there has been no single definitive r
990.00   Since its launch in 2001, Gas Trading Manual (GTM) has established itself as the leading information source on the internationa
930.00   This groundbreaking report brings together, analyses and compares many of the top chemical companies' corporate environme
180.00   The food industry currently faces an unprecedented level of scrutiny. Consumers are concerned not just about the safety and q
400.00   This thoroughly revised edition of Thomas Krayenbuehl’s classic handbook confirms its reputation as the standard work on this
790.00   A cutting-edge study of transfer pricing in the increasingly competitive financial services sector. It examines the many issues inv
400.00   John MacNamara’s timely report looks at the principles and practice of structured trade and commodity finance deals and wha
180.00   Extrusion cooking is the ideal method for manufacturing a number of food products from snacks and breakfast cereals to baby
530.00   This title is an updateable looseleaf and the definitive reference source for the scrap and recycling industry worldwide. It covers
180.00   This book is an ideal introduction to this complex field for the non-specialist. The book opens with an introduction to the key pr
210.00   Food process modelling provides an authoritative review of one of the most exciting and influential developments in the food in
60.00    This updated and revised edition of a widely acclaimed and successful text for undergraduates examines topology of recent com
955.00   The Encyclopedia of textile finishing is designed to bring some order into the confusion of technical terms in this sector. The en
160.00   This publication highlights the relations between the scientific evidence for selected functions and the respective vitamin intake
175.00   Although consumption of spirits on a global scale is vast, the spirits industry derives its profits from a relatively small number of
185.00   The Hazard Analysis and Critical Control Point (HACCP) system has now become generally accepted as the key safety managem
155.00   An authoritative source of reference on every aspect of thermal welding and associated cutting processes. Each process is exam
200.00   Chemical contaminants in food, from pesticides and veterinary drug residues to contamination from food packaging, are a majo
185.00   This book contains information on the chemistry, physics, process technology, applications and markets for man-made cellulosi
630.00   This series of cutting-edge reviews examines and evaluates the special rules designed to regulate the internet, both in Europe a
65.00    This latest edition of the definitive knitting technology textbook is an essential reference for all textiles students, textile enginee
200.00   Edited by a leading authority in the field, and with a distinguished international team of contributors, Frying provides an author
185.00   Thermal technologies have long been at the heart of food processing. The application of heat is both an important method of p
180.00   When things go wrong in the bakery, the pressures of production do not allow time for research into the solution. Solving these
70.00    Using 372 references and 211 illustrations, this book underlines the fundamentals of electrochemistry essential to the understa
540.00   This is the first comprehensive guide to the workings of an industry of crucial importance to the world’s agricultural economy. P
130.00   Balance sheet structures is a practical and comprehensive guide to balance sheet issues. The book begins by covering the financ
180.00   Cereals processing is one of the oldest and most important of all food technologies. Written by a distinguished international tea
185.00   Antioxidants are an increasingly important ingredient in food processing, as they inhibit the development of oxidative rancidity
180.00   Medical textiles are one of the major growth areas within technical textiles. This book comprises 29 original edited papers and g

540.00   The aluminium industry provides an in-depth overview of the international aluminium trade at the turn of the millennium. Its c
200.00   This authoritative reference work provides a comprehensive source of information for readers concerned with all aspects of fire
185.00   This book provides a comprehensive collection of over 150 standard commercial biscuit recipes and provides the ideal compani
115.00   This practical handbook is concerned with the different processes in welding technology, their selection, and utilisation. Proces
80.00    The dyeing of natural and synthetic fibres by methods based on modern chemical technology is increasingly becoming an intern
150.00   This authoritative book enables the designer and the user of hot runner moulds, confronted by the increase in available system
60.00    Addresses a neglected mathematical area of which geometry and trigonometry form an important core component, as they un
115.00   This reference allows someone who has just started working in the composites field to gain knowledge of both basic principles
60.00    Examines developments in the construction, production and testing of various types of sewing threads.
140.00   This publication is a comprehensive book on the welding of aluminium, aimed primarily at practising engineers and students of
65.00    This modern, still relevant text is suitable for senior undergraduate and graduate students, teachers and professionals in mathe
190.00   This book presents a comprehensive treatment of both functional and decorative textiles used in the automotive industry. Writ
110.00   A thoroughly practical text, but with sufficient theory to aid understanding of the welding parameters of strength, fatigue and f
240.00   This major handbook looks at the manufacture, processing and applications of hi-tech textiles for a huge range of applications i
180.00   Performance prediction is an important factor in ensuring the correct design specification of composite materials. This practica
185.00   This book is concerned with the often very complex problems composite materials can present in the testing of their structural
180.00   This book covers a wide range of mathematical concepts as they are applied to regularly repeating surface decoration for textile
185.00   This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures.
210.00   Comprehensive and international in content, Dietary anticarcinogens and antimutagens: Chemical and biological aspects includ
185.00   This is the second edition of the definitive analysis of the international wine trade. This invaluable update focuses on individual
140.00   This textbook provides a complete guide to the design, procurement, installation and testing procedures for local area network
190.00   Following the crises involving BSE and E.coli the meat industry has been left with an enormous consumer confidence problem. I
540.00   This looseleaf industry handbook provides a comprehensive and practical guide to the workings of the international zinc indust
235.00   This volume presents the papers from the eighth in this successful series of conferences organised by the Centre for Composite

95.00    Focusing on the plastic property of materials and the behaviour of structures under load, this book presents perfect plasticity m
190.00   The stability and shelf-life of a food product are critical to its success in the market place, yet companies experience considerab
180.00   Food intolerance and the food industry approaches the issue of food intolerance from an industry rather than a clinical perspec
530.00   The coal industry is the first publication to provide a definitive overview of the structure and workings of the international coal
180.00   Genetic modification is one of the most important and controversial issues facing the food industry, nowhere more so than in c
185.00   J Ralph Blanchfield has brought together a distinguished panel of European and American experts from industry and academia.
185.00   Pultrusion for engineers provides an authoritative guide to this emerging technology and in its detailed case studies shows how
180.00   This book examines the key quality factors from raw material selection through processing and storage to retail display. It is a u
190.00   This book shows how fibre-reinforced polymers can be exploited in the design and production of engineering components to pr
200.00   This unique book analyses all the commercial aspects of oil companies, taking into account the significant structural changes wi

190.00   This practical guide gives investors all the tools they need to assess the financial and business opportunities offered by the finan

540.00   This major looseleaf is a guide to the complex and multifaceted tea industry. The history and origins of tea are explained initiall
655.00   This is the first in a series of looseleaf surveys reviewing the state of corporate environmental reporting in a number of key indu
60.00    Lipid Glossary 2 is a handy reference for a wide range of lipid scientists and technologists, as well as for those involved in the tra
990.00   Since its launch, Sugar Trading Manual (STM) has established itself as the definitive information source for the sugar market wo
180.00   Provides recommendations for the fatigue design of directly welded, unstiffened joints (or connections) between structural ste
595.00   This looseleaf manual provides a wealth of information on an industry that, until recently, was highly secretive. Unlike tradition
120.00   This book presents a survey of techniques available for the fabrication, repair and modification of structures underwater. Brief
215.00   The tenth volume of "Gums and Stabilisers for the Food Industry" provides an up-to-date account of the latest research develop
185.00   Building on the success of his bestselling Foreign Exchange Options, Alan Hicks has produced this new and invaluable guide to t
50.00    This advanced undergraduate text with research applications in metallurgy is of interest to biochemists, biologists, organic, and
180.00   As it moves towards the next century, the welding industry is facing major and rapid technological development. New processe
180.00   Contains the following reports: A review of techniques to manage penetration variability during TIG welding; An appraisal of me
180.00   Research reports carried out by TWI staff for The Welding Institute’s industrial members. Title includes: Structural integrity of b
180.00   Research reports carried out by TWI staff for their industrial members.
180.00   Research reports carried out by TWI staff for The Welding Institute’s industrial members.
180.00   Research reports originally prepared for TWI’s Industrial Members.
180.00   Research reports originally prepared by TWI for their Industrial Members.
180.00   Research carried out by TWI staff for The Welding Institute’s industrial members. This title includes diffractive optical elements
60.00    This book emphasises the need for non-destructive testing and evaluation of welded components, with due coverage of various
95.00    A Rapra Review Report which describes the production of styrene polymers in detail, and then goes on to describe the mechan
305.00   This report responds to the growing involvement of companies that make virgin plastics with the business of collecting and pro
40.00    Compiled by a working group from the German Iron & Steel Institute, this catalogue of surface defects on electrically coated str
185.00   This volume uses a molecular approach to bring the reader up to date with research into the structure and properties of these u
235.00   The exponential growth of e-commerce has intensified the requirement for secure electronic verification systems. This groundb
110.00   The chemistry and application of reactive dyes comprise an enormous subject. In this textbook the author gives a detailed acco
70.00    This unusually extensive overview combines instrumental and radiochemical techniques with qualitative and quantitative (volu
185.00   In an overlooked area of welding, this book is an extremely practical and down-to-earth money-saving guide to repair of mould
60.00    This textbook introduces the fundamental concepts and principles of statics and stress analysis and then applies these concepts
60.00    This advanced undergraduate and post-graduate level text addresses developments in object technology and their impact in co
50.00    Inorganic solution chemistry is treated more thoroughly in this text book than many of its contemporaries. Some basic knowled
260.00   The proceedings of the 7th INALCO conference which was held at TWI, Cambridge in April 1998.
70.00    Based on the European Welding Engineer (EWF) syllabus part three – Construction and Design – this book provides a clear, high
180.00   This report reviews the literature in the field of thermal welding and goes on to identify the theories for the mechanism of ther
200.00   This major text is an essential reference offering a comprehensive guide to the range of IFPs (Intermediate Food Products) avail
180.00   This research report, previously restricted to subscribing members of TWI, is now being published generally. It concentrates on
185.00   Environmental issues continue to influence political, business and social agendas around the world, spawning opportunities for
240.00   An updated version of a respected and established text. This edition contains two completely new chapters dealing with the us
35.00    The author brings to this book many years of essentially practical, real life experience in setting up and running very large offsh
185.00   Maximising performance in insurance operations is a practical guide to managing successful change programmes within the insu
185.00   3-D textile reinforced composite materials are obtained by applying highly productive textile technologies in the manufacture o
60.00    A fundamental text for advanced undergraduates and postgraduates of structural engineering. Provides understanding of struc
60.00    The purpose of this wide-ranging introductory textbook is to provide a basic understanding of the underlying science as well as
145.00   This compilation focuses on the events of growing, processing, quality control, color, as well as freezing, canning, chip, and drie
200.00   This book gives a perspective on the international mining and metals industry, from historical details of mines and mining to the

175.00   Directors’ and officers’ liability insurance is one of the fastest growing areas in the world insurance market. Company directors
60.00    This book presents and discusses those common crystal structures that would be encountered by students takingchemistry, or a
40.00    This introductory text presents ordinary differential equations with a modern approach to mathematical modelling in a one sem

100.00   Since 80% of the global production of oils and fats is consumed as food and a further 6% is eaten by animals to produce more h
50.00    The unusual approach of this text gives final honours and post-graduate students a clear and explanatory account of one of the
70.00    The most recent edition of an established textbook used in undergraduate courses on metallurgy and in specialised welding cou
65.00    Driving strategic change in financial services outlines the important trends and political decisions which have transformed the f
65.00    The rules for survival and success have never been so unclear, the choice of strategies so uncertain and the pressure to act quic
65.00    Developing people and the corporate culture in financial services describes the personal views and direct experience of practiti
160.00   Revision of Document IIS/IIW – 1033-89 ‘Information on practices for underwater non-destructive testing’ Prepared by Working
100.00   The addition of minerals to food and drink products is used in many countries as a public health measure, whilst food industries
175.00   The highly versatile nature of magnetic resonance techniques in dealing with problems arising in many areas in food science is d
130.00   This edition takes into account the very latest advances in electronic banking and treasury security. The electronic transmission
190.00   The proceedings of a conference organised by the European Commission Joint Research Centre Institute of Advanced Materials
185.00   This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre re

210.00   The proceedings of a symposium held in Berlin in March 1996, drawing together practical expertise in measurement techniques
180.00   Based on his own wide-ranging experience in several offshore centres, Bill Penman Brown comprehensively reviews the develop
205.00   Agri-food quality II addresses the quality management of plant-based food materials throughout the production chain, from fie
180.00   This book examines the physical testing of textiles in the form of fibre, yarn and fabric, the emphasis throughout eing on standa
130.00   ACT companion to treasury management is more than just an update of the classic forst edition. It has been completely rewritt
175.00   Lipids have a variety of functions in the human body which have increasingly been under the spotlight in recent years. A multid
210.00   Natural antioxidants and anticarcinogens in nutrition, health and disease represents the most recent information and state-of-t
210.00   Proceedings of an international conference organised by the TWI.
180.00   Environmental considerations are increasingly shaping the development of many industries. This is an overview of surfactants a
185.00   Reporting on front-line research into these natural materials, this volume focuses on the use of chemical and physical methodo
25.00    This review in the Textile Progress series covers the history and development of air-jet spinning technology, the economic aspec
185.00   This volume concentrates on research information on the beneficial effects of nitrates and their fate in the environment. Adopt
25.00    This review in the Textile Progress series traces the history of air-jet weft insertion and provides an analysis of weft insertion ele
40.00    Since it was first published in 1958, this dictionary has been continually adapted to include the rapid advances in the iron and s
205.00   The field of chemically modified particle surfaces has seen many significant developments. This text covers analytical and synth
80.00    This title collects together in a co-ordinated form the large number of theoretical and experimental studies on the technology o
30.00    This title includes: The shell period; Melting and dissolution of the particle core; Determination of heat and mass transfer coeffi
55.00    This revised and updated edition now contains around 18,000 terms in each language. The dictionary covers foundry practice, p
175.00   This volume brings together contributors from water regulators, and water suppliers in Europe and North America to discuss th
50.00    This title in the Textile Progress series reviews developments in automotive textiles, one of the most important markets in the t
205.00   This volume, with contributions from leading international experts, reports on the need to produce high quality food whilst sat
205.00   The edited papers which comprise this book were presented at the international conference, Ecotextile ’98, which was organise
125.00   A practical guide to every aspect of metal trading on one of the world’s largest metals markets, the London Metal Exchange. Dr
190.00   Reinforced plastics composites are increasingly in demand for a huge range of long-term applications – unsurprisingly, as they a
185.00   This book provides a comprehensive guide to the trade in the world's most popular fruit. Covering all aspects of the trade from
85.00    This work delivers ideas, comments and projects on energy, communications, transport, management, human resources, and fi
155.00   In the global economy, goods, services, investments, loans, information and people move across national borders with growing
180.00   The diversity of subjects involved in marine corrosion and fouling processes are evident in the approaches and techniques desc
60.00    An unusual blend of theory and practice of digital signal processing (DSP) for advanced undergraduate and postgraduate electr
250.00   The papers presented at this conference reflect the significant advances that have been made in emerging technologies, exper
90.00    Trading in oil futures and options is an introduction to price risk management in the worldwide oil industry. With numerous pra
60.00    A comprehensive discussion of group theory in the context of molecular and crystal symmetry, this book covers both point-grou
70.00    This book delivers a course module for advanced undergraduates, postgraduates and researchers of electronics, computing scie
60.00    This book is aimed at senior undergraduates, graduates and engineers. It fills the gap between the numerous textbooks on trad
90.00    In the first book to look from a thoroughly practical perspective on the crucial business of profits forecasting, Fred Wellings pro
185.00   This latest edition of Stan Grainger’s original 1989 handbook reflects the many advances in surfacing technology since that time
160.00   The proceedings of an international seminar organised by TWI in conjunction with the Paton Welding Institute, Ukraine and hel
470.00   This remarkable book is based on over 25 years of research at UMIST, and contains over 1500 scanning electron micrographs an
185.00   Fibre-reinforced composites are generally manufactured using filaments with microscopic diameters. Commercial applications u
175.00   This is the first comprehensive professional guide to the strategies and techniques of competitor analysis for the financial servic
215.00   This work contains the proceedings of a conference on gums and stabilisers for the food industry. Contributions are concerned
205.00   Since the first edition of Foreign Exchange Options in 1993, trading in foreign exchange options has undergone rapid expansion
175.00   Practical dehydration has long been recognised as a standard text for the industry. In the second edition the author provides a
205.00   This collection of papers are devoted to a single chemical reaction, The Maillard reaction. They look at various different topics,
205.00   The continuing expansion world-wide of the composites industry ensures a warm welcome for the second edition of this popula
180.00   The international paper trade discusses the whole spectrum of the pulp and paper industry and is designed for busy readers in
50.00    This manual identifies the quality parameters and describes each ingredient by type, function, handling and storage.
50.00    This manual explains the principles and machinery involved in baking and post-baking processes, and the key issues in maintain
50.00    This manual takes readers through such secondary processes as coating, sandwiching and icing, concentrating on common prod
50.00    The final manual describes the range of packaging options available together with storage and handling, highlighting the key iss
50.00    This manual describes the various types of biscuit dough, the key stages in dough mixing and handling, and identifies potential
50.00    This stage in biscuit production is often a source of problems. The author identifies what these problems are at each stage, exp
175.00   The banking systems of eastern Europe and the states of the former Soviet Union have undergone dramatic change in recent ye
25.00    This revised edition updates essential principles to be followed in modern short-staple spinning and considers materials and eq
205.00   The Maillard reaction was originally studied due to its importance in foods. Lately, it has been found to play a key role in many
25.00    This title in the Textile Progress series, concentrates on reviewing published work and articles since 1985. It is divided into testin
65.00    Provides an introduction to the diverse subject area of experimental design, with many practical and applicable exercises to hel
175.00   This report is written by one of the world’s leading experts on the international wine trade. It provides a detailed examination o
40.00    This major study provides a detailed analysis of the fundamentals of different types of stitches, seams, and sewing threads and
25.00    Covers the history and development of computer integrated manufacturing and total quality management, and their implemen
25.00    This review includes pill formation; the measurement of pills; different factors affecting pilling, including fibre, yarn and fabric c
70.00    The continuing evolving capability of guided weapons demands ever more knowledge of their development. This modern and c
60.00    Blending of two or more different types of fibres is of crucial significance to the textile industry. The yarns and fabrics produced
215.00   Focuses on key developments in the environmentally-friendly production of energy and its conservation through an enhanced u
40.00    An expanded edition of a defects catalogue first produced in the late 1980s. The catalogue covers specialist materials and impro
160.00   This special report with user-friendly software has been produces following a collaboration between the Centre for Adhesives t
180.00   The properties of humic substances (HSs) in plants, soils and sediments regulate the environment and affect all aspects of like, y
205.00   Covers the following topics: Strategies; Intumescence: Mechanism studies; New intumescent polymetric materials; Flame retard
205.00   The application of high pressures to serve scientific ends is an ever-growing area of research. With sections on chemistry, food s
175.00   This work reviews the current status of research and commercial developments in the field of biosensors used for food analysis
25.00    This review covers the various types of design logic applied to different types of products. Sections cover the types of design an
50.00    This introductory text on circuit analysis for undergraduate courses follows a logical development of topics. Thetopology of netw
175.00   Written for the international banking and financial services community, their advisors and offshore companies, this is the first b

175.00   The first comprehensive professional guide to the workings and structure of the international private banking marketplace, this
180.00   The author has provided an analysis of the principles of private international law as applicable to banking. This is the first book
185.00   The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting comp
180.00   Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s.
175.00   This book is designed to provide an introduction to an area of the law which even now remains a closed book to the majority of
50.00    This work is a foundation course text for first and second year undergraduates in which description and understanding of inorg
90.00    Management of cash resources is crucial to smooth operation of all companies. This book offers a practical guide to intricacies o
90.00    Managing cash flow, interest rates and relations with the bank are fundamentally issues for every business. This clear and conc
55.00    This is a comprehensive guide to the workings of the world’s commodity and financial futures and options markets. For all thos
70.00    This handbook provides a comprehensive analysis of the current state of welding technology as applied to large structures and

220.00   The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufa
210.00   The area of food adulteration is one of increasing concern for all those in the food industry. This book compares and evaluates
210.00   A report containing the results of a TWI Group Sponsored Project beneficial to designers of thin walled structures, especially th
175.00   This book fills a gap in banking literature by providing a professional and sophisticated 'risk' primer for bank directors, executive
100.00   This is the fourth volume of an occasional series of review volumes dealing with aspects of lipid methodology. As with the first t
85.00    This volume makes available the latest reflection on large-scale engineering for building a better world for tomorrow. Internatio
50.00    Adopting a step by step methodical approach, the book is aimed at first and second year undergraduates andaddresses the mat
50.00    This text for advanced undergraduates and graduates reading applied mathematics, electrical, mechanical, or control engineeri
60.00    This book was written to summarize some of the fundamentals to be considered in the food processing and technology area. It
60.00    This text for advanced undergraduates reading electrical engineering, applied mathematics, and branches of computer science
85.00    This book demonstrates the relevance of antioxidant mechanisms to studies of antioxidants in both technology and biology and
80.00    Since the first edition of this book was published in 1987, there has been a revolution in information technology and computing
215.00   This volume is a record of a conference, which was the fourth in a series held at NWEI, in Wrexham. It brought together scientis
95.00    This book deals with purification methods, chemical bonding theory and spectroscopic methods and is a reference book for che
205.00   The field of food colloids is concerned with the structural and dynamic aspects of multi-phase food systems - dispersions, emuls
180.00   Since the first edition of New fibers was published in 1990, new research and development has produced fibers with high tenac
210.00   Based on the contributions given at a leading international conference, this volume concentrates on developments in the envir
180.00   Provides a unique insight into the development and use of liquid moulding processes, with a comprehensive description of the

185.00   This is a compilation of papers presented at the 1997 Flavours and Fragrances conference. The subject matter is intentionally b
90.00    Managing banking relationships is the first publication to look at the principles and practice governing relationships between bu
215.00   This volume contains the 86 lectures, posters and workshop presentations made at the 8th Weurman Flavour Research Sympos
180.00   Focuses on the state of scientific knowledge about the carcinogenicity of metals, their compounds and other inorganic substanc
155.00   This second edition builds on the success of the first and covers the widespread introduction of computer technology, particula
65.00    Mössbauer Spectroscopy has an extraordinary variety of applications throughout science and industry in physics, chemistry, bio
40.00
160.00   These recommendations present general methods for the assessment of fatigue damage in welded components, which may aff
155.00   An updated, revised and expanded version of Professor Burdekin's earlier work of the same title, this book explains this branch
180.00   Provides a detailed insight into short fibres of different types (metallic and organic) in a polymer matrix, as well as reporting on
90.00    Jim Lynch’s latest book focuses on one of the major threats to the banking industry - customer defection. The tradition of custo
90.00    This book aims to explain the principles of contract law for the businessman, and to put those principles into their commercial c
190.00   This thirteenth edition has been totally revised and expanded over previous editions, having new sections, new products and p
450.00   This thirteenth edition has been totally revised and expanded over previous editions, having new sections, new products and p
50.00    Bridging the gap between journal articles and specialised books, Food Science Reviews provides expert coverage of key areas of
100.00
190.00   This thirteenth edition has been totally revised and expanded over previous editions, having new sections, new products and p
190.00   This thirteenth edition has been totally revised and expanded over previous editions, having new sections, new products and p
175.00   This report contains information from more than sixty shipyards from around the world, and gives a unique inventory of the dif
70.00    Proceedings from the 7th European Conference on Composite Materials, London, UK, 1996
85.00    This book is intended to provide a middle road between the basic student text and the heavy practitioner’s manual. It covers al
180.00   The proceedings of a seminar held at TWI in September, 1995, focusing on crack arrest philosophy which aknowledges that a br
90.00    The author has provided an introductory guide to technical analysis for investors. Whereas most books on the subject start som
90.00    This book is split into four distinct sections to provide a complete account of investment performance measurement. The first s
185.00   This book concisely and uniquely encompasses the principles of corrosion and wear as manifested in industrial failures and the
180.00   Edited papers from the 1995 conference Ecotextile – Wealth for Waste in Textiles, organised by Bolton Institute and the British
205.00   This book covers the production, management and changing patterns of global wood and fibre resources, with emphasis on the
175.00   This is the first book to cover in a comprehensive way, the conduct and structure of the international sugar industry from cultiva
35.00    A complete coverage of decision mathematics (discrete or business mathematics) module for A-level examination syllabuses an
175.00   Food irradiation is an area of food technology that has been poorly documented and consequently has provoked much confusio
60.00    This advanced undergraduate and postgraduate text will serve for courses in many engineering disciplines and professionals in
185.00   This book reviews methods and techniques for separating food components and products of the biotechnology industry. The in
235.00   In the book, Professor Miravete demonstrates the optimisation of beams, plates and sandwich constructions in the designs of a
215.00   The book presents important information on the presence of various flavonoids found in berries, vegetables and fruits and thei
200.00   Understanding the structural, compositional and physicochemical properties of the wheat used in bread, biscuits, pasta and oth
70.00    Bridges the gap between theoretical texts with little software support and the giant finite element software packages, this mod
155.00   This report assesses the current state of knowledge of the 'local approach' to cleavage fracture, reviews application to ferritic st
175.00   This book fills a gap in the market by providing practical advice on financial management information systems for banks and wi
175.00   This book provides an analysis of the attempts in both US and UK to chase the 'Holy Grail' of liquid property; the buying and sel
210.00   The proceedings of the Cellucon Trust conference held in Lund, Sweden, in 1993. The latest scientific advances are covered, env

180.00   This is a comprehensive guide the wool industry and the trading mechanisms involved in this vital business. The supply chain is
280.00   The textile processing industry is complexly structured - just as complex, even impenetrable is the know-how that an expert in t
185.00   The cyclical boom-to-recession nature of the economics of cocoa supply is a major problem for the international cocoa industry
175.00   A practical and authoritative book covering every aspect of the tin trade beginning with its origins and history including the trau
120.00   This compilation brings to the surface technologies that have emerged over the years, making an impact on the industry and th
185.00   In the second edition of this book, Michael Atkin examines the political and economic dynamics of the international trade, expl
80.00    This book provides a forum for discussion of issues relating to the management of colour in effluents. A team of authors repres
155.00   A Special Report from the International Institute of Welding which introduces definitions of the terminology relevant to stress d
65.00    This work is a definitive list of food abbreviations, terms and acronyms compiled and edited by Wilbur A. Gould, Ph.D., who has
55.00    This practical pocket handbook provides the essential information on the financial markets of twelve member states of the Euro
175.00   Based on the edited proceedings of a meeting held in Petten, The Netherlands in September 1992, this book deals with test me
175.00   The author's have provided a clear vision of the French financial sector, which is often underestimated by the international com
175.00    This book provides a basic guide to the iron and steel industry in a single convenient reference source. The origins of steel and i
50.00     This is an advanced text book and reference manual which completely revises, updates, and enlarges Allan Ormerod’s Modern
190.00    A comprehensive review and evaluation of slag data was begun in 1989 in an international multi-partner research project initia
40.00     This lucid and balanced introduction for first year engineers and applied mathematicians conveys the clearunderstanding of the
25.00     The authors review the behaviour and control of aerosols as they influence their penetration through fabrics together with the
60.00     This text addresses a worldwide problem of pollution hazards, with an understanding of scientific and technical control of the la
175.00    This book provides an invaluable insight into one of the most influential global industries. It covers: publishing; broadcasting; ne
175.00    This volume covers the latest developments in pesticide usage, with particular emphasis on the regulations that safeguard user
65.00     The most thorough book available for those interested or involved in the dyeing of cellulosic fibres. It gives detailed coverage o
175.00    A detailed examination is provided of the circumstances which led to the negotiation of each of the international commodity ag

25.00     Reviews the key literature relating to thermal bonding in the production of nonwoven fabrics. Consideration is given to the pro
1120.00   This comprehensively updated edition of Oil Trading Manual (OTM) covers all the major oil trading instruments and their applic
50.00     This text embodies at advanced and postgraduate level the professional and technical experience of two experienced mathema
180.00    The author has gathered information about all aspects of the industry and produced a concise review which covers everything f
60.00     This book is a discussion of the impact of the science of chemistry upon our quality of life, as it is experienced in our current env
90.00     Jim Lynch provides a fresh in-depth study of the moral pressures experienced by bankers and shows how to tackle them realisti
175.00    Biochemistry of milk products documents advances in the field and focuses on the two most active areas of research areas, whi
125.00    The use of tubular, or as it is often known, flux-cored wire has grown dramatically in the last thirty years. It is a versatile and pro
180.00    This book is chiefly concerned with the conventional fusion welding processes and their problems and will be of value to practic
65.00     This title covers a full range of dealing with people, beginning with the changes in the food industry that necessitate treating Hu
180.00    This book includes every aspect of the cotton trade, starting with the history and background, its growth and production patter
180.00    A survey of the role of plastics materials in the motor industry. It discusses progress in the different sectors of automotive engin
175.00    The construction and housing markets have an importance in the economy which goes beyond the confines of the FTA Index su
70.00     This book concentrates on the social and economic effects that metals have had on community life and on wider historical deve
205.00    This book derives from a workshop held in Sweden to examine the environmental implications of the dramatic increase in carbo
180.00    This book looks at the technical advances in the limitation of waste such as that produced by current computing processes and
175.00    This authoritative guide examines the background and principles of food dehydration as well as providing a complete dictionary
25.00     Covers man-made fibres as a group, their manufacture and properties, fibre characteristics and their effects on spinning, and p
175.00    Cyanobacteria, or blue-green algae, commonly occur in a variety of water types throughout the world. A high proportion of the
185.00    This book introduces the engineer to fibres and polymer matrices, which are the components of the polymer composites for str
60.00     This well-established textbook provides students of food science with an authoritative and comprehensive study of cereal techn
185.00    A practical book of value to those in the automotive, chemical, aerospace and offshore industries. Case studies are included and
180.00    MIC (microbiologically influenced corrosion) is the deterioration of metal by corrosion processes that occur either directly or in
35.00     This practical manual provides essential material for the extensive world-wide community of non-professional astronomers. Eve
90.00     This book provides, for the first time, a broad analysis of the whole range of potential conflicts in finance, based on both academ
185.00    Translated from the German, this is a practical book for engineers which explains the trials, development and manufacturing pr
40.00     Published as part of the Manual of textile technology series, Woollen yarn manufacture provides a complete account of the wo
160.00    Translated from Japanese, this book details some of the most interesting developments of the last few decades in the field of fi
25.00     This book is designed to bridge the gap between publications that deal with textile coloration on the craft level, and others that
190.00    During the last decade the engineering applications for nickel and chromium coatings have gained in importance. In this third e
80.00     Twenty years of work went into the writing of this: the first book to cover the history of mines and mining in North and South A
160.00    A comprehensive guide to avoiding hydrogen cracking which serves as an essential problem-solver for anyone involved in the w
205.00    This overview describes ideas and techniques for the study of structure and dynamics of direct relevance to food. It pays particu
180.00    Written for those involved in the markets who have always found that there was never one central source on which to on for a
175.00    Activity in the gold markets has focused investors' attention on this unique commodity. To provide the reader with a better und
160.00    The greater part of this volume deals with matters under the heading "Steels with characterizing properties for specific fields of
215.00    Food and cancer prevention: Chemical and biological aspects covers a topic which is attracting considerable attention and aims
60.00     This food industry handbook is a practical, science-based guide to food safety in food processing operations.
175.00    This compendium, compiled by two senior engineers from TWI, draws together information from more than 150 individual spe
25.00     Based on James Park's well known basic guide to setting up and operating commercial colour matching systems, this book is ful
25.00     Covers a wide range of newer spinning processes - electrostatic, air-vortex, friction, disc, double-roving, self-twist, wrap, false-t
175.00   Encapsulation and controlled release combines basic information on the subject with details of the latest research, making it su
175.00   Enables the reader both to understand and to use, in a practical manner, laser welding. The author explains the principles of las
175.00   Written mainly for specialists in non-destructive examination and fracture mechanics, this book provides means to estimate the

175.00   A detailed original perspective from a leading expert on welding metallurgy of the self-shielded arc welding process and its app
175.00   Thomas Mohide, one of the world's acknowledged silver authorities has produced a panoramic study of this remarkable commo
120.00   This is the complete interactive instruction book, easily followed, yet technically complete for the advanced food manager, by a
70.00    The most comprehensive treatment by leading experts of all the topics necessary for a full understanding of wool dyeing and pr
65.00    Within the last decade there has been an increasing awareness that use of standards deeply notched fracture mechanics test sp
205.00   This volume of proceedings reviews the current status of risks entailed in the manufacture, handling, use and disposal of the ch
175.00   Nickel is an internationally traded commodity and the smallest of the LME's six base metals contracts. Its unique characteristics
185.00   A study of the structure, processing and properties of carbon fibre reinforced polyetheretherketone and related materials.
160.00   The book is divided into two parts: Part A discusses the metallurgical and physical interactions by which microstructures are gen
175.00   A complete guide to the tomato industry, including over 50 full colour photos on tomato diseases and other vital elements. It is
175.00   This book provides a general technical and mechanical background for the basic processing machinery now used for making sna
55.00    Agricultural futures and options has been written for the potential and actual users of agricultural futures markets but should a
140.00   Comprehensive advice on applications, techniques and the best available equipment is given in clear, straightforward language
85.00    Written for practitioners and students with an engineering background, this book bridges the gap between their understanding
70.00    Intended for those who have to apply or teach design skills in a technical or engineering context, this resource book defines and
175.00   This book contains contributions based on the proceedings of two symposia on food contamination held in London in April 198
175.00   This book describes all the metallurgical phenomena involved in the different welding processes. Practical examples of a wide v
60.00    This title is a How to do it and why to do it educational and reference guide. It is a compilation of all the R&D principles and obj
160.00   This title includes Process options and manual techniques for welding pipework fabrications; Mechanised arc welding process o

140.00   This report is the result of a major study on the influence of both main plate thickness and of attachment size on the fatigue str
185.00   This volume reviews current knowledge of toxic substances in crop plants with particular reference to their anti-nutritional effe
175.00   This book reviews the need for increased training in the food industry in order to bridge the gap between Eastern and Western
185.00   Contributors from the wood preservation industry address a range of needs associated with cost, safety and performance effica
175.00   This book provides a review of developments in food science and technology that have taken place over the years and have pro
205.00   The papers in this volume provide a balanced account of developments in soil organic matter research. It focuses on compositio
175.00   Nitrate and nitrite are potentially dangerous substances which can have a detrimental effect on the ecological balance of rivers
175.00   This book provides a detailed guide to white brined cheeses: raw materials, processes, manufacture, equipment and packaging
175.00   Most of the information regarding veterinary residues is scattered throughout a multitude of scientific journals aimed at specia
210.00   Manufactured foodstuffs typically exist in the form of complex, multi-phase, multi-component, colloidal systems. One way to tr
175.00   Part one of the book provides a concise description of the fatigue behaviour of welded joints and factors which influence their f
205.00   Advances made in the last two decades have provided increasing insights into the chemical complexity of dietary fibre and this
55.00    Versatility, speed and low cost make wet-stick welding an attractive method for use in underwater repair and construction. Thi
100.00   This book provides designers, welding engineers and metallurgists with the essential information for understanding the welding
125.00   Various forms of thermal pulsing in TIG and MIG welding, and droplet pulsing in the MIG process, are described in detail. The au
95.00    The author presents a unique scheme for selecting processes at the drawing board stage where a need for a connection is usua
185.00   An English version of a sucessful German book. Both traditional and modern concepts are described.
70.00    A practical 'how to do it' book written with the design and welding interface in mind. It informs designers not only of what they
175.00   This book is an excellent introduction to the increasingly complex field of nutrition and health for food technologists and health
95.00    This title includes: Origins and development: The process, The first twenty years; Development after 1955; Principles: Equipmen
60.00    This book is an invaluable introduction to the physical properties of foods and the physics involved in food processing. It provid
25.00    This new edition has been fully updated, reorganised and rewritten, taking into account recent developments in coloration tech
70.00    This book covers the theoretical aspects of the science of textile coloration, extensively revised and enlarged from the original e
190.00   Interest in the use of non-destructive examination for monitoring the performance of materials and components continues to g
180.00   This text explains how properties of the system are affected by such factors as the crystallisation of the fat, the surface behavio
180.00   The International Symposium on Plant Polymeric Carbohydrates, which was held as a satellite symposium of the International C
215.00   The book considers fundamental concepts and discusses dispersed food systems such as gels, emulsions and foams and chemic
65.00    This book offers a comprehensive survey of the man-made fibres, including rayons and other natural polymer fibres, and the tru
55.00    A comprehensive survey of the natural fibres animal, vegetable and mineral on which we depended for our textiles until compa
50.00    This wide-ranging work provides a unique combination of theoretical exposition and wealth of practical experience. It is invalua
40.00    Defines the most common defects in hot dip galvanized products on the basis of their external appearance, the structure of the
50.00    In this book, the authors consider not only the design and operation of the loom itself, but also the preparation of yarns and pa
160.00   This book explores the ways in which melt flow behaviour can be exploited by the plastics engineer and technician for increased
160.00   Watson’s advanced textile design: Compound woven structures is a companion volume to Watson’s textile design and colour. I
160.00   Watson’s textile design and colour: Elementary weaves and figured fabrics was first published in 1912 and has been revised sev
35.00    The characteristic illustrations and descriptions of defects in the three “Defect Catalogues” provide information on the possible
              Short Contents


              Metals and alloys) Polymers Ceramics; Composites; Tribology of natural synovial joints and artificial replacements; Wear of screws and plat
              Introduction: Definition of ultra precision bearings; Motion error; Static stiffness; Damping; Thermal characteristics; Bearing – Shaft system
              Advanced controls for machine tools; Artificial intelligence applied in machining; Composites machining; Cutting forces and cutting temper
              Part 1 Membrane reactor plant and integrated process design for industrial applications. Part 2 Energy and environmental applications of m
              Part 1 Operating environments, materials and engineering of ultra-supercritical coal power plant. Part 2 Improving ultra-supercritical coal p
              The temperature field in welding; Welding stresses and strains; Load-carrying capacity of welded structures; Diagnosis and prediction of th
              Part 1 Fundamentals of advanced vehicle technologies. Part 2 Advanced and alternative transportation fuels. Part 3 Internal combustion en
              Part 1 Introduction and socioeconomic drivers. Part 2 Development of biorefining processing techniques and technology. Part 3 Biofuels pr
              Part 1 Biogas for energy and environmental protection. Part 2 Feedstock treatment and biogas production processes. Part 3 Biogas plant d
              Part 1 Introduction to radioactive waste management and contaminated site clean-up. Part 2 International experience in radioactive waste
              Part 1 Coal power plant materials. Part 2 Life assessment of defect-free components. Part 3 Life assessment of components containing defe
              Part 1 Fundamentals of geoscience and geological storage of carbon dioxide (CO2). Part 2 International case studies/lessons learned.
              Part 1 Wind turbine blade design challenges and developments. Part 2 Wind turbine blade materials challenges and developments. Part 3 W
n specific food groups. The book is divided into sections of important food constituents including proteins, lipids, carbohydrates, minerals, and water. Th
              Part 1 Coal resources, social and environmental issues, and economic analysis. Part 2 Coal characterisation, chemistry and utilization param
              Introduction; Scope for process and quality control in spinning; Statistical techniques in quality control; Cotton fibre selection and bale ma
              Part 1 Polymeric, composite and novel membrane reactor materials. Part 2 Inorganic membrane reactor materials. Part 3 Membrane react
              Microalgae; Metabolic pathways of microalgae; Genetics of microalgae; Cell growth kinetics; Photobioreactor; Transport phenomenon in p
              Part 1 Probabilistic methods for predicting the reliability of equipment: Terminology, concepts and definitions; Formal-statistical methods;

                Part 1 Systems biology and metabolic engineering of industrial microorganisms. Part 2 Advances in fermentation technology. Part 3 Use of
                Part 1 Food origin: introductory issues. Part 2 Analytical approaches for verifying the origin of foods. Part 3 Using new analytical approache
                Part 1 Operational challenges and structural alloy requirements. Part 2 Structural alloys and their development. Part 3 Use of advanced str
                Part 1 Fundamental ageing issues and degradation mechanisms in light water reactor (LWR) materials. Part 2 Materials ageing and degrada
                Part 1 Production and processing practices and their influence on the microbial load of nuts. Part 2 Non-microbial contaminants of nuts. Pa
                Part 1 Introduction to calcium and chemical looping technology. Part 2 Fundamentals of calcium (Ca) looping technology. Part 3 Fundamen
                Part 1 Fundamental issues, science and engineering of biomass combustion, conversion and utilisation. Part 2 Biomass combustion and co-
                Part 1 Design, development and systems integration. Part 2 Systems control, performance & optimisation. Part 3 Construction, operation a
 ement system in the spice and herb manufacturing process. It provides step-by-step details on aspects of hazard management, risk assessment, food sa
                Part 1 Fundamentals of electricity transmission, distribution and storage systems. Part 2 Development and application of electricity transm
                Synthesis and processing of modern nanocoatings; Introduction to new methods for wear protection; Characterization of nanocoatings; Cl
operties. The first part of the book discusses models of fiber and yarn structure. Problems such as packing, density, porosity, pores, fiber orientation, ten
 dification of natural and synthetic fibres for technical applications. Problems such as the high level of moisture absorption of natural fibres, poor wettab
                Part 1 Introduction: Fundamental nuclear safety issues; Current methodologies and technological developments; Safety assessment, analy
                Main equations of diffraction theory; Diffractive optical transformations; Calculation of diffractive optical elements (DOE) in the geometric
                Part 1 Fundamentals of terahertz technology for imaging and sensing: Optoelectronic techniques for generation and detection of terahertz
                Part 1 Packaging fundamentals: Packaging and society; The packaging supply chain; Packaging functions; Packaging and legislation; Packagi
                Part I Sewing of textiles: Stitching and sewing methods; Automated sewing technologies; Seaming failures; Factors affecting ssewn seam pe
                Part 1 Fundamentals of joining and assembly: Overview of joining methods in medical applications;Testing bond strength; Adhesives in bon
                Part 1 Types of breast implants: History of biomaterials used for breast augmentation; The development of breast implants; The chemistry
                Part 1 Principles and transduction approaches: Introduction to biosensors; Optical biosensors; Electro-chemical biosensors; Piezoelectric se
                Part 1 Market trends: The current structure of the global textile industry; Trends in textile markets and their implications for textile produc
                Biocompatibility of current materials; The concept of biocompatibility; New materials for the future; A process for the evaluation and selec
                Part 1 Embrittlement in operational nuclear power plants: RPV fabrication; RPV embrittlement management. Part 2 RPV embrittlement da
                Overview and history. Part 1 Core technologies: Registration; Software; Human-computer interface. Part 2 Applications: General surgery; C
                Part 1 Fundamental issues: A sustainable metropolis; Limits to growth; Separation processes; Sustainable economics; Quantifying sustainab
                Part 1 Properties and considerations: Nano-porous materials/biomaterials; Nano-crystalline materials/biomaterials; Nano-reinforced mate
                Part 1 Natural structure of tooth and related tissues and their modification: Synthetic tooth enamel; Enamel matrix proteins for regenerati
                Part 1 Structure and characterization of metallic films: X-ray diffraction of metallic films; Scanning electron microscopy and crystal orientat
Part 1 Process control in fibre and yarn manufacture: Process and quality control in cutivating plant-based textile fibres; Process control in
Part 1 Types of model: Neural networks; Genetic algorithms; Evolution strategy; Fuzzy control; Computational fluid dynamics (CFD); Finite
Part 1 MEMS for automotive applications: MEMS for automotive passenger safety; MEMS for automotive vehicle stability control; MEMS f
Part 1 Introduction to ATILA finite element modelling: Overview of the ATILA finite element modelling software code; The capacity of the n
Part 1 Medical applications: Brain imaging; neural activation imaging; Ophthalmic imaging; Cardiovascular imaging; Musculoskeletal imagin
Part 1 Properties: Physical metallurgy; Thermodynamics; Kinetics and phase transformations. Part 2 Processing: Primary production; Alloyin
Part 1 Requirements for food ingredient and nutraceutical delivery systems: Introduction; Components carried and the difficulties they pre

Part 1 Solar power: Silicon PV; Thin film PV; Thermophotovoltaics; Photoelectrochemical solar cells. Part 2 Hydrogen production and storag
Part 1 Analytical methods and risk assessment: Gas chromatography and mass spectroscopy techniques for the detection of chemical cont
Part 1 Introduction: Overview of the nuclear fuel cycle; Radiological protection; Security; Public acceptability; Economics and sustainability
Part 1 General principles: Modelling techniques; Texture evolution; Damage evolution; Recrystallisation and grain growth; Dynamic recryst
Part 1 Introductory issues: Definitions, regulations, health claims associated with dietary fibre and wholegrain foods; Dietary fibre analysis
Part 1 An introduction to computer vision in the food and beverage industries: Image acquisition; Hyperspectral and multispectral imaging
Part 1 Introduction: Role of waste to energy; WTE systems; Environmental issues and regulation; Life cycle assessment (LCA) and sustainab
Part 1 Fundamentals of semiconductor lasers: Principles of semiconductor lasers; Growth of semiconductor laser structures; Photonic cryst
Part 1 Theory and modelling of ultrasonic transducers: Introduction; Basic theory of elastic vibrations in solids; Piezoelectricity and basic co
Introduction: definition and challenges of sterilisation. Part 1 Sterilisation techniques: Steam and dry heat sterilisation; Radiation sterilisati
Part 1 Introduction: Automatic process control for the food industry; Robotics in the food industry; SCADA and related systems. Part 2 Inst
Part 1 Fibre types: Understanding textile fibres and their properties; Natural fibres: vegetable fibres; Natural fibres: animal fibres and silk; S
Part 1 Management of waste electronics: EU legislation relating to electronic waste: the WEEE and RoHS directives; The present recast of t
Principles of fitness for purpose; Pressure vessel design requirements (PD 5500/BS EN 13445); Pressure vessel design requirements (ASME
Introduction to dyeing and dyehouse automation; Principles underlying the dyeing process; Dye transport in fluid systems; Development o
Renewable lubricants; Principles of lubrication; Lubricant properties and characteristics; Transition from fossil to bio; Renewable feedstock
Part I Technologies: Biotextile fibres, yarn and fabric production; Nanofibers for biotextile applications; Surface modification of textiles; Ste
Part 1 Single quantum dot systems: Microscopic theory of single quantum-dot lasers; Resonance fluorescence from a coherently driven qu
Part 1 Introduction: Introduction; Soft fabrication; Review of sensor and actuator mechanisms. Part 2 Applications: Electrochemical and im
Part 1 Types of polymer nanocomposite according to filler: Carbon nanotube based nanocomposites; Graphite sheets as fillers in polymer n
Part 1 Core technologies: Materials; Micro-electrodes and nano-electronics; Micro-assembly and micro-packaging techniques; Biofuel cells
Part 1 Radionuclide chemistry in natural environment: Fundamentals of aquatic chemistry; Aquatic chemistry of the actinides; Aquatic che
Part 1 Types and properties of medical polymers: Types of biodegradable and bioresorbable polymers for biomedical applications; The effe
Part 1 Short fiber based processing: Injection moulding; Compression moulding; Extrusion. Part 2 Thermoplastic based processing: Sheet fo
Part 1 Types and processing: An overview of functional nanofibers; Types of nanofiber reinforcement in polymer matrix composites; Carbo
Part 1 Fundamentals: Wetting in brazing; Safety of brazed joints; Modelling of brazing process. Part 2 Materials: Brazing of alloys; Brazing o
Overview of laser processing techniques. Part 1 Laser deposition: Laser-induced self-assembly of semiconductors for photonic devices; Eme
Part 1 Hip resurfacing designs: The ACCIS prosthesis for hip resurfacing arthroplasty; The ADEPT prosthesis for hip resurfacing arthroplasty;
Part 1 Key technology issues: Fundamental principles; Solar resource and siting; Techno-economic assessment. Part 2 CSP system developm
Part I Yarns and weaving technology: Types and properties of fibres and yarns for weaving; Yarn preparation for weaving: winding and war
Part I Design issues in military clothing and equipment: key issues in body armour; Assessing military equipment requirements; Anthropom
Part 1 Microbial decontamination of different food products: Microbial decontamination of fresh produce; Microbial decontamination of r
Introduction: key trends and markets for MIM. Part 1 Processing: Designing for MIM; Powders for metal injection molding; Powder binder
Part 1 Design and analysis: Selecting adhesives for marine environments; Designing adhesively-bonded joints for ship applications; Designin
Part 1 Concepts: Introduction to innovation in aeronautics; Biologically inspired techonologies for aeronautics; Morphing concepts and tec
Part 1 Breeding, drug and vaccine development: Fish immune responses and implications for disease control; Crustacean immune response
The principles of system modelling; Integrated systems and their significance for system modelling; Problem organisation; Methods and ap
Space systems: The space mission; Space environment; Orbits; Spacecraft subsystems; Space payloads; Fundamentals of heat transfer for s
Part 1 Processing techniques for natural fibres: Silk: production and future trends; Improving the flame retardancy of natural fibres; Improv
Part 1 Materials and properties of printed films: Technologies for printed films; Materials for printed films; Materials science concepts for p
Part 1 Overview: Why gas turbines; Gas turbine types; Gas turbine cycles. Part 2 Modern gas turbine systems and components: Compresso
Part 1 Types of fibre and properties: Cotton fibres; Bast fibres; Silk fibres; Wool fibres; Mohair, cashmere and other hair fibres. Part 2 Impro
Emerging food packaging technologies: an overview. Part 1 Developments in active food and beverage packaging: Controlled release packa
Processing methods of nanomaterials; Effect of processing techniques on defect structure; Evolution of microstructure during consolidatio
High-speed engines: Novel turbocharging system-boosting solutions for SI and CI engine downsizing with impact on specific power, emissio
Part 1 Fundamentals of implant wear: Introduction to wear phenomena of orthopaedic implants; Biology of implant wear; Biomechanics o
Quality specifications for herbs and spices; Basil; Bay leaves; Black pepper; Capiscum, chillies, paprika and cayenne pepper; Cardamom; Ch
Overview of Aircraft Maintenance; The business of maintaining aircraft; Aircraft Maintenance Paradigm; Aviation MRO’s challenge to the IT

Part 1 Introduction: Overview of modern earth building; Environmental design and energy efficiency; Hygrothermal behaviour and occupan
Part 1 Fundamentals of phase transformations: The historical development of understanding of phase transformations in ferrous alloys; Th
Part 1 Diffusionless transformations: Crystallography of martensite transformations in steels; Morphology and substructure of martensite i

Herbs, spices and their active components as natural antimicrobials in foods; Effect of natural antioxidants in herbs and spices on shelf life
Animal feeds, feeding practices and contamination opportunities. Part 1 Contamination by microorganisms and animal by-products: Ecolog
Part 1 Methods of MAX phase synthesis: Powders, solids and thin films. Part 2 Electrical, elastic and thermal properties: Solids and thin film
Part 1 Safety and quality of packaged meat, poultry and seafood: Sensory and quality issues associated with meat, poultry and seafood pac
Part 1 Introduction to immunity and inflammation: Innate and acquired immunity; The gut-associated immune system; Inflammation and c
Part 1 Introduction to minimized cardiopulmonary bypass: Historical development of minimized cardiopulmonary bypass (MCPB); Anticoag
Defining the term natural in the context of food products. Part 1 Natural additives, ingredients and flavourings: Natural food and beverage
Part 1 Textile spreading and associated preparatory processes: General characteristics of the cutting room; Preparation and quality control
Part 1 Types and properties of magnesium alloys: Developments in types of magnesium alloy; Deformation mechanisms; Deformation twin
Introduction to breadmaking; Breadmaking: an overview. Part 1 Wheat and flour quality: The chemistry and biochemistry of wheat; Techn
Combined cycle power plants; Advanced gas turbines; Natural gas fired combined cycles; Integrated gasification combined cycles; Humid a
Part 1 Processes, material characterization, risks and regulation: Development and applications of nanoscale materials in the food industry
The development of textured yarns; Basic principles of false twist texturing; Yarn texturing machine design; Yarn twist application methods
Part 1 Introduction: Cell therapies- future perspectives; Basic principles for Cell Culture. Part 2 Basic principles of stem cells: Basic principle
Part 1 Colour and colour perception: What is colour? Variability in normal and defective colour vision: consequences for occupational envir
Introduction to biomaterials for spinal surgery. Part 1 Fundamentals of biomaterials for spinal surgery: The challenges of bringing a medica
Part 1 Improving corrosion and cracking resistance: Laser surface modification of steel and cast iron for corrosion resistance; Laser surface
Belt and rope drives; Gears; Design of cone drums in spinning; Types of cams in textile and their design; Equations of motion and textile ap
Space tether systems in an astronautics; Mathematical models of space tether systems; Motion of a satellite with an attached tether syste
Introduction: advanced materials and vehicle lightweighting; Advanced materials for automotive applications: an overview; Advanced met
Introduction to sheet metal forming processes; Principles of rubber pad forming; Characteristics of elastomer materials; Forming of shallow
Part 1 Fundamentals: Overview of proton exchange membrane fuel cells; Fuels; Catalyst materials; Membrane materials; Gas diffusion med
Physics and mathematics for nanoscale systems; Nanoscale physics and electronics; Electron dynamics in nanoscale device; Spin dynamics
Part 1 Fundamental issues and assessment in advanced biodiesel production: Introduction to advanced biodiesel production; Life cycle sus
Study of the scratch resistance of Polymethylmethacrylate-single walled carbon nanotubes nanocomposites: Effect of modification by a roo
Part 1 Coating types and applications: Hydrophilic coatings for biomedical applications in and ex vivo; Mineral coatings for orthopaedic app
Part 1 Advanced characterisation techniques for polymer electrolyte membrane and direct methanol fuel cells: Extended X-ray absorption
Part 1 Failure mechanisms: Progress in failure criteria for polymer matrix composites: A view from the first World-Wide failure exercise (WW
Part 1 Introduction to corrosion in nuclear power applications: Overview of corrosion engineering, science and technology; Overview of nu
Introduction to nuclear decommissioning: definitions and history. Part 1 Planning: Fundamental issues in starting a nuclear decommissioni
Part 1 Corrosion behaviour and manufacture of nanocrystalline materials: The impact of nanotechnology in reducing corrosion cost; Corros
Part 1 Fundamental science and engineering of high temperature superconductor (HTS) materials and components: Fundamental issues in
Introduction to statistics; Treatment of data and construction of frequency distribution; Measures of central tendency; Measure of “disper
Overview of infrastructure and methodologies for the justification of nuclear power programmes. Part 1 Infrastructure of nuclear power pr
Strategic management; Garment industry; Strategic marketing in garment industry; Strategic management in garment industry; Strategic m
Mechanisms of action of metal working fluids in metal cutting; Selection and testing of metal working fluids; Delivery of metal working fluid
Part 1 Measuring the rheological behaviour of concrete: Introduction to the rheology of complex fluids; Introduction to the rheometry of c
Agent-based manufacturing systems; Artificial intelligence applied in manufacturing; Advanced manufacturing systems; Automated guided
Part 1 Sensory evaluation: Principles and application to alcoholic beverages: Overview of sensory perception; Sensory quality control and a
Part 1 Mechanisms of hydrogen interactions with metals: Hydrogen adsorption on the surface of metals; Analysing hydrogen in metals: bu
Introduction to aerospace materials; Aerospace materials: past, present and future; Materials and material requirements for aerospace str
Part 1 Welding techniques: New welding techniques for aerospace engineering; Inertia friction welding (IFW) for aerospace applications; La
Part 1 General overview of innovation and textile product development: Innovation: concepts and developments in the 21st Century; Pract
Part 1 The hydrogen embrittlement problem: Hydrogen production and containment; Hydrogen-induced disbonding and embrittlement of
Compression and spark ignition engines for light and heavy duty applications, automotive and other markets; Internal combustion engines
Introduction to food and feed extrusion and related terminology; Components of a food or feed extrusion system; Selecting the right type
The design process; Information, entropy, and its relationship to design; Axiomatic design; Metric design; Reliability-based design; Entropy
Introduction to welding; Gas welding; Basics of electricity in welding; Arc welding: An overview; Power sources for arc welding; TIG welding
Part 1 Traditional methods for machining composite materials: Turning processes for metal matrix composites; Drilling processes for comp
Knitting at a glance; Classification of knitting; Weft knitting elements and loop formation; General terms in weft knitting; Basic weft-knitted
Technical staff development; Technical staff – the middle management; Policy deployment and middle management; Leadership and self d
Concepts of production and productivity; Role of apparel engineering; Method analysis; Motion economy; Apparel production systems and
Business case assessment and design essentials for food factory building projects; Determining equipment and process needs and how this
Part 1 General aspects of dyeing: Fundamental principles of dyeing; Structure and properties of textile materials; Pre-treatment and prepa
Part 1 Textile applications: The coloration of wool; Dyeing of synthetic fibres; Dyeing of cellulosic fibres; Dyeing of textile fibre blends. Part
Interpreting API and ASME Codes; An introduction to API 653: 2009 and its related codes; An introduction to API RP 575; Reasons for inspe
Papers cover the following areas: Hybrid and electric vehicles; Fuels; Advances in powertrain; Fuels and emissions.
Turning; Drilling; Milling; Grinding and finishing processes; Thermal advanced machining processes.
Part 1 Bolted joints: Reinforcement of composite bolted joints by local metal hybridization; Bolted joints in glass-reinforced aluminium (Gla
Part 1 Fundamentals of tribocorrosion: Corrosion and passivity of metals and coatings; Adsorption layers and passive oxide films on metals
Part 1 Electron diffraction techniques for studying thin film growth in situ: Reflection high-energy electron diffraction (RHEED) for in situ ch
Introduction; Two body orbital motion; Orbital perturbations in the two body motion; Frame rotations and quaternions; Rigid body motion
Pressure sensors; Velocity and mass flow by pressure measurements; Hot wire anemometer; Laser anemometry; Temperature measureme
Part 1 Management of technology in biscuit manufacture: The role of the technical department; Quality management systems and HACCP;
Part 1 Power plant fuel flexibility, condition monitoring and performance assessment: Solid fuel composition and power plant fuel-flexibilit
Part 1 Materials for reinforcements in composites: Fibres for composite reinforcements: properties and microstructures; Carbon nanotube
Part 1 Overview and assessment of hydrocarbon fuel conversion processes: Characterisation and preparation of biomass, oil shale and coa
Part 1 fundamental aspects of stress corrosion cracking (SCC) and hydrogen embrittlement: Mechanistic and fractographic aspects of stres
Economic importance of tropical and subtropical fruits; Nutritional and health-promoting properties of tropical and subtropical fruits; Post
Introduction: the importance of energy-efficiency for electrical motor products; Classification: electric motors, pumps, fans; Energy-efficien
Introduction to polymer modified bitumen (PMB). Part 1 Types of polymer modified bitumen: Polymer modified bitumen emulsions (PMBE
Part 1 Technologies: Current and advanced coating technologies for industrial applications; Nanostructured thin films from amphiphilic mo
Compound yarns (core-spun yarns); Developments in hybrid yarns; Developments in rope structures and technology; Developments in fanc
Introduction to food proteins; Caseins; Whey proteins; Meat protein ingredients; Gelatin; Seafood proteins; Egg proteins; Soy proteins; Pea
Introductory papers; Turbo compressors; Heat pump and refrigeration; Reciprocating compressors (valves); Refrigeration; Reciprocating an
Part 1 Introduction: Modelling of electromigration phenomena; Modeling electromigration using the peridynamics approach; Modeling, sim
Part 1 Introduction to membrane science and engineering: Fundamental membrane processes, science and engineering; Fundamental scie

Part 1 Egg production and consumption: Egg and egg product production and consumption in Europe and the rest of the world; Social econ
Part 1 Microbial and chemical contamination of eggs: Microbiology and safety of table eggs; Foodborne disease associated with eggs: micr
Part 1 Types and properties of medical textiles: Modern textiles and biomaterials for healthcare; Hi-tech textiles for interactive wound ther
Action plan for a healthy agriculture, healthy nutrition, healthy people; Keynote; Importance of the omega-6/omega-3 balance in health an
Section 1 Epidemiology. Section 2 Malnutrition in women and children. Section 3 Micronutrient deficiency disorders: A. Vitamin a deficienc
Part 1 Materials and mechanical properties of bioactive glass: Melt-derived bioactive glasses; Surface modification of bioactive glasses; Cel
Part 1 Processing and modeling: Weld integrity of tailor welded blanks; Deformation of tailor welded blanks during forming; Mechanics bas
Part 1 Design and production techniques for hygiene textiles: The design of novel hygiene textile products; Nanotechnology and its applica
Part 1 Fundamental principles of biaxial stretching: Fundamentals of biaxial stretching and definitions of terms; Equipment design and requ
Part 1 Theory of thin film growth: Measuring nucleation and growth processes in thin films; Quantum electronic stability of atomically unif
Part 1 Computer-based technology for textile materials: Digital technology for yarn structure and appearance analysis; Digital-based techn
Part 1 Nutritional influences on brain development: The effects of early diet on cognition and the brain; Influence of long-chain polyunsatu
Introduction to polymer matrix composites. Part 1 Component materials: Reinforced materials; Matrix materials; Interface of polymer mat
Part 1 Processed meats: Market-driven changes, legislative issues and product development: consumer demands and regional preferences
Introduction; Literature survey; Collaborative assembly design; Evaluation of product assemblability in different assembly sequences; Adva
Mangosteen (Garcinia mangostana L.); Melon (Cucumis melo L.); Nance (Byrsonima crassifolia (L.) Kunth); Noni (Morinda citrifolia L.); Olive
Cocona (Solanum sessiliflorum Dunal); Coconut (Cocos nucifera L.); Dabai (Canarium odontophyllum Miq.); Date (Phoenix dactylifera L.); D
Part 1 Superplastic forming methods: Metals for superplastic forming; Standards for superplastic forming of metals; Processes and equipm
Sustainable development (SD) as a goal in production, marketing and trade; The supply chain of textiles; Product specification function and
Açai (Euterpe oleracea Mart.); Acerola (Malpighia emarginata DC.); Achachairú (Garcinia humilis (Vahl) C. D. Adam); Ackee fruit (Blighia sap
An introduction to rice: Its qualities and mysteries; Physical properties of rice; Milling quality of rice; Degree of milling of rice and its effect;
Part 1 Introduction to chronic wounds: Dysfunctional wound healing in chronic wounds; The role of micro-organisms and biofilms in dysfun
Part 1 Fundamentals of electrospinning: Introduction to electrospinning; Polymer chemistry; The electrospinning process, conditions and c
Part 1 Functional textiles and clothing for improved performance and protection: Improved textile functionality through surface modificati
Structural superplasticity of polycrystalline materials; Characteristics of grain boundary enesembles; Orientation-distributed parameters of
Errors in instrumental measurements; The exploratory and confirmatory analysis of univariate data; Statistical analysis of univariate data; S
Part 1 Fundamental concepts in diesel engine system design – analytical design process, durability, reliability, and optimization: The analyt
Part 1 Understanding welding residual stress and distortion: Introduction to welding residual stress and distortion; Understanding welding
Introduction to adhesive joining technology for electronics. Part 1 Types of adhesive: Thermally conductive adhesives in electronics; Anisot
Introduction to bioactive materials in medicine. Part 1 Designing bioactive materials for use in medicine: Molecular design of bioactive mat
Introduction; Basic properties of building decorative material; Building decorative stone; Gypsum decorative material; Building decorative
Introduction; The basic properties of building materials; Air hardening binding materials; Cement; Concrete; Building mortar; Wall and roof
Multifunctional and nanoreinforced polymers for food packaging. Part 1 Nanofillers for plastics in food packaging: Multifunctional nanocla
Papers cover the following areas: Heat and A/C; Heat exchange/manufacture; Engines; Alternative powertrain; Engines/emissions; Externa
Part 1 Properties and processing: Mechanisms and properties of the shape memory effect and superelasticity in alloys and other materials
Part 1 General issues with functional foods: Defining functional foods and associated claims; EU legislation and functional foods: A case stu
Part 1 Introduction to small and micro combined heat and power (CHP) systems: Overview of small and micro CHP systems; Techno-econo
An overview of pressure vessels under external pressure; Axisymmetric deformation of pressure vessels; Shell instability of pressure vessels
Part 1 Manufacturing of non-crimp fabrics: Production of non-crimp fabrics for composites; Standardisation of production technologies for
Part 1 Saturated fats in foods: Functional and nutritional aspects: Saturated fats in foods and strategies for their replacement: an introduct
Part 1 Analysing fracture of welded joints and structures: Constraint-based fracture mechanics in predicting the failure of welded joints; Co
Part 1 Types of fibrous textiles and structures: Natural and man-made fibres: Physical properties; Yarns: Production, processability and pro
Part 1 Principles: Fabric construction approaches to textile design: Fibres, yarns and fabrics: Fundamental principles for the textile designer
Part 1 Recent trends in coffee: Introduction to coffee; Health benefits; Recent trends in value addition; Value-added by-products. Part 2 Re
Introduction to quality management; Product quality objectives; Impact of yarn parameters at customer’s end; Reasons for poor quality in
Part 1 Deteriorative processes and factors influencing shelf life: Microbiological spoilage of foods and beverages; Chemical deterioration an
Part 1 Fundamentals of high temperature superconductors: Deposition technologies, growth and properties of high TC films; Transport pro
Bone tissue engineering. Part 1 Bone reconstruction in implantology and reconstructive preprosthetic surgery: Fundamentals of bone graft
An introduction to polymer carbon nanotube composites. Part 1 Preparation and processing of polymer carbon nanotube composites: Poly
Part 1 Fundamentals: Corrosion electrochemistry of magnesium (Mg) and its alloys; Activity and passivity of magnesium (Mg) and its alloys
Part 1 Processing of bulk nanostructured metals and alloys: Production of bulk nanostructured metals and alloys by severe plastic deforma
Part 1 Tracing and tracking in the food chain: The role of service orientation in future web-based food traceability systems; Biotracing: A ne
Part 1 Fundamentals of radioactive materials separations processes: Chemistry, engineering and safeguards: Chemistry of radioactive mate

Part 1 Processing and surface treatments to compose the interface in natural fibre composites: Modifying cellulose fiber surfaces in the ma
Part 1 Introduction: Structural properties of silicon-germanium (SiGe) nanostructures; Electronic band structures of SiGe alloys. Part 2 Form
Part 1 Processing of hydrogels: Hydrogel swelling behaviour and its biomedical applications; Superabsorbent cellulose-based hydrogels for
Part 1 Introduction: Expressions; Statements; Programming; Architecture; Plotting. Part 2 Solving non-linear equations: Solving systems of
Overview of oxy-fuel combustion technology for carbon dioxide (CO2) capture. Part 1 Introduction to oxy-fuel combustion: Economic comp
Part 1 Introduction: Fundamentals of knitting: Types and suitability of yarns for knitting; The physical properties of weft knitted structures;
Part 1 Pre-adult nutrition and health: Children’s dietary needs: nutrients, interactions and their role in health; Fluids and children’s health;
Milk intake, calcium and vitamin d in pregnancy and lactation: Effects on maternal, fetal and infant bone in low- and high-income countries
Part 1 Determining mycotoxins in food and feed: Sampling strategies to control mycotoxins; Sample preparation and clean up for mycotox
Surface topography; Friction and wear; Lubrication and roughness; Micro/nano tribology; Tribology in manufacturing; Bio and medical trib
Radioactive waste characterisation. Part 1 Radioactive waste treatment processes and conditioning technologies: Compaction processes; In
Part 1 Materials and properties: Designing clinically useful substitutes for the extracellular matrix; Designing ceramics for injectable bone g
Part 1 Fundamentals of comfort and assessment: Factors affecting comfort: Human physiology and the role of clothing; Properties of fibres
Part 1 Materials and structure: Thermal barrier coatings prepared by electron beam physical vapor deposition (EB-PVD); Ceramic thermal b
Introduction to electroless copper and nickel-phosphorus (Ni-P) depositions. Part 1 Electroless copper depositions: Surface morphology ev
Part 1 Symmetry and groups: Symmetry; Groups and representations. Part 2 Application of group theory to vibrational spectroscopy: Redu
Part 1 Using fibre reinforced polymer (FRP) composites to extend the service-life of civil engineering structures: Key issues in the use of FRP
Part 1 Fundamental resources, design, safety and reliability: Meteorology and wind resource assessment; Site investigation, characterisatio
Part 1 Commodity biomaterials: Membranes for oxygenators and plasmafilters: Titanium and cobalt-chromium alloys for hips and knees; P
Part 1 Humanitarian demining: The evolution of robots and the challenges: Introduction: Mobile robotics systems for humanitarian de-min
History and origins of the international cocoa trade; Agronomics of international cocoa production; Environmental and other factors affect
Part 1 Food biopreservation: Identifying new protective cultures and culture components; Antifungal lactic acid bacteria and propionibacte

Part 1 Introduction to soft computing: Introduction to soft computing techniques: artificial neural networks, fuzzy logic and genetic algorith
Part 1 Viscoelastic and viscoplastic modelling: Viscoelastic constitutive modeling of creep and stress relaxation in polymers and polymer ma
Part 1 Surface modification techniques: Surface modification of biomaterials by plasma polymerisation; Surface modification of biomateria
Part 1 Key issues of biofuels production: Introduction and overview; Multiple objectives policy: Life cycle sustainability assessment; Vegeta
Introduction to aluminium metallurgy. Part 1 Production and casting of aluminium and its alloys: Production of alumina; Production of prim
Part 1 Foodborne pathogen surveillance and outbreak investigation: Surveillance for foodborne pathogens in humans; Systems for real-tim
Introduction; Wastes generated by aluminum smelter plants; Treatment of the wastes and quality of byproducts; Utilisation of wastes (byp
Part 1 Polymer/nanoparticle composites: Synthesis and optical properties of cadmium sulfide/polymer nanocomposite particles; Conductiv
Part 1 Physiological responses to biomaterials: Tissue responses to implanted materials; Blood interface biomaterials; Biocompatibility of c
Electro-optical switches; Thermo-optical switches; Magneto-optical switches; MEMs-based optical switches; SOA-based optical switches; Sw
Part 1 General: Introduction to the welding and joining of magnesium; Welding metallurgy of magnesium alloys; Preparation for welding o
Introduction to non-thermal food pasteurisation processes. Part 1 Case studies in HPP and PEF processing of food: Commercial HPP of ham
Part 1 Developments in food and nutraceutical separation, extraction and concentration techniques: Supercritical fluid extraction; Pressuri

Part 1 Introduction to PLiM: Nuclear energy, materials and operations; Key elements of PLiM for long-term operation; Safety regulations an
Interpreting ASME and API Codes; An Introduction to API 510 (Sections 1–4); API 510 Inspection Practices (Section 5); API 510 Frequency an
Functions and inverse functions; Polynomials and rational functions; Induction and the binomial theorem; Trigonometry; Complex number
Part 1 Environmental impacts of food production and processing: Improving nutrient management in agriculture to reduce eutrophication,
Part 1 Winemaking technologies and wine quality: Yeast and fermentation management for improved wine quality; Metabolic engineering
Part 1 Introduction to multi-physics and tribology within the multi-physics environment: An introduction to the multi-physics mutli-scale ap
Part 1 Introduction to yarn spinning and structure: Overview of developments in yarn spinning technology; Fundamental principles of ring
The development of piezoelectric materials and the new perspective. Part 1 Piezoelectric materials: Lead zirconate titanate-based piezo-ce
Part 1 Main types of textiles and polymers used in building and construction: Types and production of textiles used for building and constru
Part 1 Oxidation in foods and beverages: Understanding oxidation processes in foods; Metals and food oxidation; The impact of singlet oxy
Part 1 Fundamentals of sintering: Thermodynamics of sintering; Kinetics and mechanisms of densification; Path and kinetics of microstruct
Technology; Technological system; Determining time of technological operations in clothing production; Ergonomic workplace; Analysis of
Part 1 Oxidation in animal products: Oxidation and protection of red meat; Oxidation and protection of poultry and eggs; Oxidation and pr
The brief to airport planners; Outline airport planning principles; Airport terminal and pier/satellite planning; Airport baggage handling des
Part 1 Technologies involved in textile biotechnology: Design and engineering of novel enzymes for textile applications; Developments in p
Part 1 High temperature deformation: Creep behaviour of materials; Evolution of dislocation substructures during creep; Dislocation motio
Part 1 Theories, principles and methods of measuring colour: Colour vision: theories and principles; Scales for communicating colour; Expre
Part 1 Types and development of polymer electrolytes: Introduction to polymer electrolyte materials; Ceramic polymer electrolytes; Polym
Part 1 New product development head-on: Trends, processes and perspectives: Consumer-oriented innovation in the food and personal ca
Introduction; Fundamentals of freeze drying; Heat-mass transfer analyses and modeling for drying process; Equipment of freeze drying; Fre
Part 1 Introduction: Multiple-barrier geological repository design and operation strategies; Spent nuclear fuel recycling practices and impa

Part 1 Fundamental science and engineering: Overview of stand-alone and hybrid wind energy systems; Overview of energy storage techno
Introduction to the fatigue life prediction of composite materials and structures: Past, present and future. Part 1 Fatigue life modeling: Phe
Part 1 Overview and challenges for the future: ‘Light’ industry: an introduction to laser processing and its industrial applications; The challe
Part 1 Planning and implementing non-destructive testing of reinforced concrete structures: Planning a non-destructive test programme fo
Questions are presented under the following headings: Grape analysis in winemaking; Juice and must preparation in winemaking; Yeast fer
Mechanics modeling of spot welds under general loading conditions and applications to fatigue life predictions; Resistance spot weld failur
Part 1 Infection control and barrier materials. Part 2 Healthcare and hygiene products. Part 3 Wound care materials. Part 4 Bandaging and
Overview of CCS technology. Part 1 Geological sequestration: Screening and selection criteria and characterisation technique; CO2 sequest
              Biointegration: An introduction. Part 1 Soft tissue biointegration: Biocompatibility of engineered soft tissue created by stem cells; Replacem
              Part 1 Advances in textile yarn production: Introduction: types of technical textile yarn; Advances in yarn spinning and texturising; Modifica
              Overview of CCS technology. Part 1 CCS economics, regulation and planning: Techno-economic analysis and modeling; Regulatory and soci
              Part 1 Fundamental principles of nonwovens: The formation of dry, wet, spun-laid and other types of nonwovens; The influence of fibre an
              Part 1 Deterioration of reinforced concrete and testing problems: Testing problems of infrastructure with particular emphasis on the exper
              Part 1 introducing lipids and their analysis: Lipids: Their structures and occurrence; Chromatographic analysis of lipids: general principles; L
              Part 1 Pretreatment and fractionation: Hydrothermal pretreatment; Thermochemical pretreatment; Key features of pretreated biomass so
              Part 1 Advanced power plant materials and designs: Gas turbine technology; Gas-fired combined-cycle technology; Integrated gasification
              Introduction to mechanochemical processing. Part 1 Basic science of mechanochemistry: Mechanism and kinetics of mechanochemical pro
              Part 1 Designing a sensory quality control program: Designing a sensory quality control program; Selection and management of staff for se
              Part 1 Surface degradation of light alloys: Corrosion behaviour of magnesium alloys and protection techniques; Wear properties of alumini
              Part 1 Cereal grain quality: An introduction: An introduction to the cereal grains: major providers for mankind’s food needs; Cereal-grain m
              Need of maintenance; Role of maintenance; Proactive maintenance; Planning and scheduling; Maintenance audit; Role of manpower in ma
              Introduction; Key home textiles market; Fibres and fabrics used in home textiles; Performance specifications of different home textiles; Lab
              Sustaining business; Understanding and implementation of ISO 9001:2008; Internal quality audits: A strong tool for quality management; M
              Opportunities and challenges in nutrigenetics/nutrigenomics and health; Genome-wide association studies and diet; Copy number variatio
              Part 1 Understanding grape and wine sensory attributes: Volatile aroma compounds and wine sensory attributes; Wine taste and mouthfe
              Part 1 Understanding and measuring chemical deterioration of foods and beverages: Oxidative rancidity; Protein oxidation; The Maillard re
              Part 1 Fundamental issues and building physics: Heat and mass transport; Hygrothermal behaviour and simulation; Ventilation, air quality
              Part 1 Nutritional aspects of milk: The role of milk in the diet; The health aspects of milk; ‘Designer’ milks: functional foods from milk. Part
              Ever-present danger: Introduction to the principles of risk management; Ignorance is no defence: Legislation and the corporate role in man
              Part 1 Key requirements for milk quality and safety: Milk biochemistry; The microbiological safety of raw milk; Key requirements for milk qu
              Part 1 General introduction: Overview of metals and biomedical applications; Metal selection for biomedical devices. Part 2 Mechanical be
              Part 1 Adhesive selection: Key issues in selecting the right adhesive; Advances in epoxy adhesives; Advances in polyurethane structural adh
              Part 1 Introduction: Blast threats and blast loading; Standards and specifications for composite blast protection materials; Processing polym
              Part 1 Introduction: Rationale and history of vehicle noise and vibration refinement; Target setting and benchmarking for vehicle noise and
              Part 1 Introduction: Introduction to fire toxicity; Fire scenarios and combustion conditions. Part 2 Harmful effects of fire effluents: Hazards
              Part 1 Fundamentals of woven fabric structure: The basics of woven fabric structure; Geometrical modeling of woven fabric structure; Usin
              Introduction. Part 1 Materials for lightweight automotive structures: Advanced steels for lightweight automotive structures; Aluminium all
              Introduction to different fibres; Fibre to fabric; Weaves and colour effects; Finishes; Fabric defects; Testing procedures.
              Biodiesel as a renewable energy source; Development of non-food agricultural industries for biofuel applications; Oleochemical sources: Ba
              Introduction; Examination and analysis of failed components; Polymer medical devices; Polymer storage tanks; Small polymeric containers
              Growth and later health: A general perspective; Early infancy as a critical period for development of obesity and related conditions; Leptin,
              Innovations in infant milk feeding: From the past to the future; Novel insights into human lactation as a driver of infant formula developme
              Introduction to clothing comfort; Psychology and comfort; Neurophysiological processes in clothing comfort; Tactile aspects of clothing com
              Part 1 Fundamentals of textile coatings and laminates: Overview of textile coating and lamination; Coating and laminating processes and te
              Delivering performance in food supply chains: an introduction. Part 1 Managing relationships in the food supply chain: Performance measu
              Structure and regenerative capacity of synovial joint tissues; The myofibroblast in connective tissue repair and regeneration. Part 1 Cartilag
              Introduction: Obesity and food intake: Basic and blinical approaches; Overview of the physiological control of eating; Therapeutic potentia
              Introduction. Part 1 General issues: The friction stir welding process: An overview; Material deformation and joint formation in friction stir
              An introduction to ophthalmic biomaterials and their application through tissue engineering and regenerative medicine. Part 1 Application
              Part 1 Management of waste composites: An introduction to composites recycling; Legislation for recycling waste composites; Waste mana
              Part 1 Light-duty direct injection diesel engines: Overview of high-speed direct injection diesel engines; Fuel injection systems for high-spee
              Introduction to innovations in food labelling; The Codex Alimentarius and food labelling: delivering consumer protection; International lega
              Part 1 Overview: Drug-device combination products; Enabling drug delivery from combination products; Nanomedical drug-device combin
              Omega–6/omega–3 essential fatty acids: Biological effects; Depression, suicide and deficiencies of omega–3 essential fatty acids in modern
              Part 1 Modelling the structure and behaviour of textiles: Structural hierarchy in textile materials: an overview; Fundamental modelling of t
              Introduction to dyeing of textiles; Colouring materials; Dye–Fibre interaction; Dyeing with direct dye; Dyeing with sulphur dye; Dyeing with
rittle in normal or special conditions. Brittle matrix composites are applied in various domains (civil engineering, mechanical equipment and machinery,
              Part 1 Introduction to biocomposites: Natural composites: structure-property relationships in bone, cartilage, ligament and tendons; Desig
              Part 1 Economic and legislative drivers for waste management and co-product recovery: Sustainable value stream mapping in the food ind
              Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations
Part 1 Failure mechanisms in concrete: Causes and mechanisms of deterioration in reinforced concrete; Types of damage in concrete struc
Part 1 Modern approaches to the separation of dairy components and manufacture of dairy ingredients: Novel approaches for the separat
Overview of gasoline direct injection engines; Stratified charge combustion in direct injection gasoline engines; The turbocharged direct inj
Thermodynamic fundamentals of fluorescent cooling; Theory of laser cooling; Experimental investigations and fundamental restrictions; Se
Part 1 Natural fibres: An introduction to cellulosic fibres; The structure of cotton and other plant fibres; An introduction to protein fibres; T
Terminology, abbreviations and symbols; Duties of a welding inspector; Analysis of a fusion weld; Materials and weldability; Welding proce
Part 1 Introduction: Fibre structure: its formation and relation to performance; Spectroscopic characterisation of polymer fibres; X-ray ana
Part 1 Sustainability through the supply chain: Achieving sustainable textiles: a designer’s perspective; Sustainable cotton production and p
Introduction to fibre tensile properties and failure; Tensile testing of textile fibres. Part 1 Tensile properties and failure of natural fibres: Te
Origin, nature and properties; Air: the supporter of life; Aerodynamics and flight; Sound; Meteorological phenomena; Air technology: Uses
The earth in space; The questioners; Copernicus – the doubter; The wandering scholar; De revolutionibus…; The master of heaven; Circles o
The earth in space; The questioners; Copernicus – the doubter; The wandering scholar; De revolutionibus…; The master of heaven; Circles o
Part 1 Fundamentals of cold weather clothing comfort: Achieving comfort and thermoregulation in cold weather clothing. Part 2 Materials
Introduction to failure analysis and fractography of polymer composites; Methodology and tools for failure analysis of polymer composites
Part 1 State-of-the-art research: Introduction to wheel-rail interface research; Basic tribology of the wheel-rail contact; Wheel-rail contact
Part 1 Fundamental principles of interior textiles: Natural fibres for interior textiles; Synthetic fibres for interior textiles; The use of knitted,
Executive summary; Outlook; Project background and methodological aspects; Trends of average food supply in the European Union; Food
Part 1 Biofilms in the food and beverage industries: Biofilms in the food and beverage industries: an introduction; Molecular mechanisms in
Building code seismic requirements for architectural glass: The United States; Glazing and curtain wall systems to resist earthquakes; Snow
Introduction; Quality protocols and performance standards of apparels and related accessories; Benchmarking of quality in apparel; Impor
Need for maintaining humidity; A glance at the developments; Different types of humidification; Air handling units in textile industry; Hum
Questions are presented under the following headings: Product development of new soft drinks and fruit juices: Initial issues affecting prod
Surface modification and preparation techniques for textile materials; Textile surface characterization methods; Textile surface functionaliz
Part 1 Introduction: Challenges of bone repair; Bone anatomy, physiology and adaptation to mechanical loading; Bone repair and regenera
Questions are presented under the following headings: Problem solving: A guide; Flours and grains; Other bakery ingredients; Bread and fe
A paradigm for commensalism: The role of a specific microbial polysaccharide in health and disease; The hygiene hypothesis: Do we still be
Structural health monitoring: applications and data analysis. Part 1 Structural health monitoring technologies: Piezoelectric impedence tra
Fatigue in railways: An overview; Fatigue in railway and tramway track; Fatigue in railway bridges; Safety and reliability issues affecting esc
Evolutionary aspects of the dietary omega–6: Omega–3 fatty acid ratio: Medical implications; Measuring blood fatty acids as a surrogate in
Part 1 Digestion and adsorption of food components: Oral physiology, mastication and food perception; Gut microbial ecology; Digestion a

Introduction to solid oxide fuel cells (SOFCs); Thermodynamics of the SOFC; Electronic properties of solids for SOFCs; Transport of charged
Part 1 Genetic improvement and reproduction: Genome-based technologies for aquaculture research and genetic improvement of aquacu
Part 1 Principles: Electromagnetic basis of microwave heating; Influence of food geometry and dielectric properties on heating performanc
Introduction to short fibre reinforced polymer composites; Extrusion compounding and injection moulding; Major factors on performance
Part 1 Risk assessment and management in the food chain: Introduction; Detecting pathogens in food; Modeling the growth, survival and d
Introduction. Part 1 The Four Factors: Why Four Factors?; Factor 1 Need the product; Factor 2 Accept the ingredient; Factor 3 Understand
Part 1 Characteristics of hybrid laser-arc welding: Advantages and disadvantages of arc and laser welding; Fundamentals of hybrid laser-arc
Part 1 Formulation: Chocolate manufacture; Formulation of chocolate for industrial applications; Fats for confectionery coatings and filling

Part 1 Basic principles: Properties of foods. Part 2 Ambient-temperature processing: Raw material preparation; Size reduction; Mixing and
Introduction to geopolymers. Part 1 Geopolymer synthesis and characterisation: Fly ash glass chemistry and inorganic polymer cements; G
How fatal accidents happen; Fatality and loss rates in transport and industry; Mortality from all causes; Economic growth; Analysing histor
Biosynthesis of TFA in ruminants; Formation of TFA during catalytic hydrogenation of edible oils; Formation of TFA during deodorisation of
Handle and making-up performance of fabrics and garments; Wrinkling of fabrics and garments; Pilling of fabrics and garments; Bagging of
Introduction to dynamics. Part 1 Structural dynamics in relation to earthquakes: Free vibration of single-degree-of-freedom systems (unda
Part 1 Introduction: Recent advances in polymer processing: the state of the art, new challenges and opportunities; Non-Newtonian fluid m
Introduction to food hydrocolloids; Hydrocolloids and emulsion stability; The health aspects of hydrocolloids; Agar; Starch; Gelatin; Carrage
Introduction. Part 1 Marine fouling organisms and their impact: The battle against marine biofouling: a historical review; Surface colonisati
How to use this book; Introduction – the API ICPs; Interpreting API codes; An introduction to API 570; More advanced API 570; API 574; AP
Part 1 The use of textiles in particular aspects of wound care: Wound management and dressings; Testing dressings and wound manageme
Setting the scene; Logic and deduction; Mathematical induction; Sets and numbers; Order and inequalities; Decimals; Limits; Infinite series
Part 1 The nature of the problem – oral diseases and the impact of nutrition: Diseases caused by oral bacteria; Viral and fungal infections o
Sustainability of aggregates in construction; Sustainability of timber, wood and bamboo in construction; Sustainability of vegetable fibres in
Part 1 Fundamentals: Introduction to biofilms in urology: In vivo models for ureteral stents; Models for the assessment of biofilm and encr
Introduction to titanium alloys. Part 1 Experimental techniques: Microscopy; Synchrotron radiation X-ray diffraction; Differential scanning
Mechanical testing; Gypsum materials; Polymers; Rheology; Acrylic; Resin restorative materials; Flexible impression materials; Composition
Section 1 Introduction: Introduction to wetlands and functional assessment. Section 2 Wetland database establishment: Introduction; Field
Genomics for food functionality and palatability; Lipid metabolism and nutrigenomics – impact of sesame lignans on gene expression profil
Part 1 Principles and types of fatigue in textile fibres: Basic principles of fatigue; Tensile fatigue of textile fibres; Flex fatigue of textile fibres
Results from elementary analysis; The Dirac delta function; Properties of the delta function and its derivatives; Time-invariant linear system
Part 1 Endocrine disruptors, health and behaviour: The effect of dietary endocrine disruptors on the developing fetus; Human epidemiolog
Antioxidants and antioxidant rich foods; Dietary fiber and dietary fiber rich foods; Prebiotics and probiotics; Lipids and lipid related functio
Part 1 Introduction: Dimensions of the meal: A summary; Meals in science and practice: An overview and summary. Part 2 Defining meals:
Carpet types and requirements; Structure and properties of carpet fibres and yarns; Advances in carpet weaving; Developments in wool ca
Useful stress quantities used in fatigue problems; Fundamentals of fatigue assessment; The modified Wöhler curve method in fatigue asses
Global changes in diet and activity patterns as drivers of the nutrition transition; Regional case studies – India; Regional case studies – Chin
Concept of high speed spinning; Historical perspective; Getting ready to go for high speed spinning; Control on processing parameters; Eco
Introduction; Collection of references as raw material; Materials you need; Differences between textile and other designs; Percentage of co
Part 1 The design of smart clothing and wearable technology: The emergence of wearable computing; Types of smart clothes and wearable
Part 1 Textile fiber structure and characteristics: Introduction to textile fiber identification; Ways of identifying textile fibers and materials;
Part 1 Beverage ingredients and technology: Ingredient selection for stabilization and texture optimization of functional beverages and the
Part 1 Shellfish safety: an introduction: Microbial contamination and shellfish safety; Biotoxin contamination and shellfish safety. Part 2 Im
Part 1 Properties and applications of polyolefin fibres: Types of polyolefin fibres; The structural and chemical properties of polyolefin fibres
Part 1 Introduction: Development of skin substitutes; Skin replacement products and markets; Biomechanics of skin; The pathophysiologic
Part 1 Understanding meat quality: Trends in meat consumption and the need for fresh meat and meat products of improved quality: Biolo
Corrosion in the aerospace industry. Part 1 Corrosion fundamentals and cost of corrosion: Assessing the cost of corrosion to the aerospace
Part 1 Cell responses to biomaterials using polymers and ceramics: Biocompatible 3-D scaffolds for tendon tissue engineering using electro
Part 1 Advances in wool fibre and fabric production: Improvement of wool quality through genetic engineering; The objective measuremen
Part 1 Understanding older people as consumers of food and beverages: Older people, food and satisfaction with life; Demographic and cu
Part 1 Welding technology and design to prevent weld cracking: Selection of weld-crack resistant stainless steels; Robust welding technolo
Part 1 Concepts of fabric engineering, product development and design: Introduction: Textile fiber-to-fabric engineering; Textile engineerin
Part 1 Materials: The shape memory effect and superelasticity in Ti-Ni alloys; Mechanical properties of shape memory alloys; Thermodynam
Introduction: Materials challenges in fuel cells: Materials basics for fuel cells; Alkaline fuel cells; Polymer electrolyte fuel cells; Direct metha
Part 1 Delamination as a mode of failure and testing of delamination resistance: Fracture mechanics concepts, stress fields, strain energy re
Part 1 Current practices: Current practices in condition assessment of aged ships and floating offshore structures; Current practices in cond
Part 1 General: Requirements for automotive textiles - A car producer’s view; Mapping the automotive textile supply chain; Woven and kn
Part 1 Bone cements in medicine: Bone disease; Hip replacements; Knee replacements; Vertebroplasty and kyphoplasty; Antibiotic-impreg
Natural fibers and their composites; Introduction to tribology of polymer composites; Sisal reinforced polymer composites; Jute reinforced
Introduction to fibre structure; Testing and sampling; Fibre fineness and transverse dimensions; Fibre length; Fibre density; Thermal prope
Characterization and measurement of textile fabric properties; Structure and mechanics of woven fabrics; Structure and mechanics of knitt
Part 1 Biomimetic principles, production and properties: Recombinant DNA methods applied to the production of protein-based fibers as b
Part 1 Introduction: Hydrogen storage technologies; Hydrogen futures: Emerging technologies for hydrogen storage and transport; Hydrog
Part 1 Introduction: An overview of bioresorbable materials; The biological environment for bioresorbable materials. Part 2 Degradation m
Part 1 Raw materials and products: Raw material selection: fruit, vegetables and cereals; Raw material selection: dairy ingredients; Raw ma
Part 1 System objectives and environments: More than one answer? The natural environment; The regulatory environment; Operational e
Part 1 Structure-function relationship of carbohydrate-active enzymes: Biosynthesis of polysaccharides; a-amylase. Interaction with polysa
Part 1 Advances in fire retardant materials: Flame retardancy of textiles: New approaches; Developments in phosphorus flame retardants;
Introduction to fabric testing; Sampling and statistical analysis in textile testing; Fabric composition testing; Physical and mechanical testing
Introduction to three-dimensional fibrous assemblies; Applications of three-dimensional textiles; Multi-axial warp-knitted (MWK) fabrics; M

Part 1 Ageing of composites: Processes and modelling: The physical and chemical ageing of polymeric composites; Ageing of glass-ceramic
Part 1 Chemical contaminants, chemical use in aquaculture and farmed fish safety: The risks and benefits of consumption of farmed fish; E
Part 1 Sources, properties, modification and processing of natural-based polymers: Polysaccharides as carriers of bioactive agents for medi
Nutrition and fitness from the first Olympiad in 776 bc to the 21st Century and the concept of positive health; Historical perspective: The a
Developmental perspectives on individual variation: Implications for understanding nutritional needs; Factors influencing the establishmen
Organic, physical and analytical chemistry of fats; Oils and fats used in confectionery; Processing of oils and fats; Chocolate; Compound coa
Current state of copper production; Ore minerals; Phase equilibrium of copper and iron sulphides; Equilibrium in aqueous solutions; Therm
Part 1 Biobased food packaging materials: new directions: State-of-the-art biobased food packaging materials; Types, production and asses
Structurally deficient civil engineering infrastructure: Concrete, metallic, masonry and timber structures; Fibre-reinforced polymer compos

Part 1 General issues: Key issues in applying organic paint coatings; Surface preparation for organic paint coatings; Techniques for applying
Part 1 Introduction: Biomechanics of joints; Tribology in joint replacement; Biomaterials and the chemical environment of the body; Mater
Part 1 Key drivers to improve water and energy management in food processing: legislation and economic issues regarding water and ener
Part 1 Natural-fibre composites: Natural fibres for composite applications: Types and properties; Matrices for natural-fibre reinforced com
Part 1 Polyester and polyamide fundamentals: Polyester resins; Polyamide fibres; Manufacture of polyester fibres; Manufacture of polyam
Part 1 Advances in packaging formats for in-pack processed foods: Advances in can design and the impact of sterilisation systems on conta
Autoclaved aerated concrete; High density and radiation-shielding concrete; High strength concrete; Sprayed concrete (Shotcrete); Hot we
Part 1 Understanding friction in textiles: Textile fiber morphology, structure and properties in relation to friction; Fundamental concepts of
Chemical structure and biological function; Major sources, composition and processing; Enzymatic modification of phospholipids and relat
Melting the raw materials; Multiple regression; Physical characteristics of mineral wool melts; Dimensional analysis; Fiberisation process; V
Part 1 Alloy modification: Designing oxidation-resistant alloys; Performance of gas turbine seal materials in high temperature conditions; T
Raw materials for wood-polymer composites; Additives for wood-polymer composites; Interactions between wood and synthetic polymers
Part 1 Advances in apparel design: Measuring and predicting fabric and garment drape; Computer aided colour matching of apparel fabric;
Part 1 General requirements for military textiles: Future soldier requirements: Dealing with complexity; Non-woven fabrics for military app
Introduction – how to use this book; Your 10 minute a–z guide to health and safety; Health and safety legislation – how much is there? Enf
Part 1 Consumers and seafood: Introduction to Part 1, Consumers and seafood; Consumer attitudes and seafood consumption in Europe; I
The snack food industry; Manufacturing of cereal-based dry-milled fractions, potato flour, dry masa flour and starches; Properties and man
Introduction and state-of-the-art of hydroforming. Part 1 Principles of hydroforming: Hydroforming systems, equipment, controls and tool
Introduction; Brief history of development; Some early schemes; Gas turbine developments; Steam generator concepts; The single shaft bl
Part 1 Introductory issues: Overview of health-promoting compounds in fruits and vegetables; Consumer attitudes towards fruit and veget
An analysis of welding process monitoring and control. Part 1 Monitoring technologies: Arc sensors in weld monitoring; Optical sensors in w
Part 1 Developments in high temperature corrosion: Diffusion and solid state reactions; Transition between external and internal oxidation
Introductory paper; Structural optimization I; Structural optimization II; Fatigue design; Frames; Hollow sections; Plated structures; Residua
Newer mathematical optimization methods; Cost calculations; Seismic resistant design; Fire resistant design; Large-span suspended roof m
Background; Degradation; Stabilisation; Comments; Additional references; Abbreviations and acronyms.
Principles of food fortification and supplementation. Part 1 Technological aspects: Forms of food supplements; Vitamin and mineral fortific
Part 1 Basics of microjoining: Mechanisms of solid-state bonding; Mechanisms of soldering and brazing; Mechanisms of fusion microweldin
Principles of pipeline design; Design approach; Pipeline construction and risk assessment techniques; Pressure testing and commissioning;
Characterizing the performance of dental air-turbine handpieces; Optical imaging techniques for dental biomaterials interfaces; Electron m
Part 1 Fundamentals of bioceramics: The structure and mechanical properties of bone; Fabrication processes for bioceramics; The microstr
Introduction. Economic consideration; Ownership and responsibility; The risk-based inspection (RBI) methodology for CUI; Inspection activ
Part 1 High strain high performance piezo- and ferroelectric single crystals: Bridgman growth and properties of PMN-PT single crystals; Flux
Part 1 General: Introduction; The development of creep-resistant steels; Specifications for creep-resistant steels: Europe; Specifications for
The injection moulding process; Plastics materials; Good design practice; Design checklist; Determining the right number of impressions; St
Errors in computer arithmetic operations; Solving equations of the form f(x)=0; Solving systems of linear equations; Computational eigenva
Part 1 Introduction: Flavour quality of fruit and vegetables: are we on the brink of major advances? Consumer acceptance of fruit and vege
Introduction; Classical estimation; State estimation; Statistics; Non-linear estimation; The multi-component system; The calibration system
Human growth and cardiovascular disease; The role of growth in heart development; Growth and bone development; The role of genes in
Corrosion fundamentals and evaluation techniques. Part 1 Electrochemical techniques for corrosion monitoring: Electrochemical polarizati
Introduction; History and economics of conveyor applications; Design of belt conveyors 1 – Power requirements and belt tensions; Design
Part 1 Theoretical background: Basic thermochemical relationships; Models and data; Phase diagrams; Summarising mathematical relation
Part 1 The effectiveness of controlled release and delivery systems: Assessing the bioavailability of nutraceuticals; Structure of the gastroin
Numbers, graphics and algebra; Linking algebra and graphics; Other essential functions; Combining and applying mathematics tools; Comp

Introduction; The Zeroth law; The first law; The second law; Non-stochastic processes; The third law; Extension to open and non-equilibriu
Who this book is for, what is not in it? Why chocolate? Popularity; What products? Available ingredients; The factory; Equipment; Packagin
Brownian motion and stochastic integrals; Stochastic differential equations; Linear stochastic differential equations; Stability of stochastic d
Part 1 Introduction: New product development: systematic industrial technology. Part 2 Product development strategy and management:
Introduction; Some basic concepts and definitions; General issues of toxicity for plastics and rubber; Toxicity of rubber and plastics due to t
Part 1 Introductory issues: Consumers and functional cereal products; Labeling and regulatory issues related to functional cereal products;
Background; Introduction; Additives; Inorganics, Polymers and oligomers, Organic acid derivatives - Early developments, Sorbitol derivative
Part 1 Principles of gas turbine performance: Introduction; The gas turbine; Thermodynamics of gas turbine cycles; Complex gas turbine cy
Part 1 General issues: Ceramic biomaterials; Polymeric biomaterials; Bioactive ceramics and glasses; Biodegradable and bioactive polymer/
Preservation of food by pulsed electric fields: an introduction; History of pulsed electric field treatment. Part 1 Technology: Circuitry and pu
Part 1 Nanofiber production: Electrospinning of nanofibers; Producing nanofibre structures by electrospinning for tissue engineering; Cont
Introduction; Rheological approach to nanocomposite design; Formation of thermoset nanocomposites; Structure and morphology of epo
Coating and ink products for food contact materials; Coatings and inks used in the food chain; Application techniques for inks; Regulations
Part 1 Principles of industrial enzyme technology: Discovering new industrial enzymes for food applications; Improving enzyme performanc
Part 1 General issues: The development of the cold spray process; Comparing cold spray with thermal spray coating technologies; The adva
Part 1 General issues: Modelling of materials for sports equipment; Non-destructive testing of sports equipment: The use of infrared therm
Part 1 Microstructural elements and their interactions: Polysaccharides: their role in food microstructure; Proteins in food microstructure f
Part 1 A long overdue re-appraisal: The famous engine that never was; What Carnot efficiency? The counter-flow spiral heat exchanger – S
Silane films for pre-treatment of aluminium: Film formation and curing; EIS investigation of the behaviour in 0.1 M NaCl of a double layer c
Introduction to polymeric scaffolds for tissue engineering; Introduction to polymeric drug delivery systems; Hydrogels in cell encapsulation
Part 1 Overview: Motivation, definition, and history of HCCI/CAI engines. Part 2 Gasoline HCCI/CAI combustion engines: Overview of CAI/H
Thermosetting composites. Epoxy resins. Epoxy composites. Impact resistant epoxy composites. Modification of epoxy matrix. Nanoreinfor
Section 1 Models and modelling in reality; Section 2 Modelling constructs in education; Section 3 Recognising modelling competencies; Sec
Part 1 Organic food safety and quality: introduction and overview: History and concepts of food quality and safety in organic food producti
The multi-physics of welding; Couplings and reference frames; Thermo-mechanics of welding; Nonlinear heat flow; Nonlinear deformation;
Introduction: The use of composites in civil structural applications. Part 1 Aspects of composite durability: Fabrication, quality and service l
Carburisation and metal dusting of steels and high temperature alloys by hydrocarbons; Integrity and life assessment of catalytic reformer
Part 1 Methods and procedures in thermal cycling oxidation testing prior to COTEST: Survey of existing test procedures and experimental f
Introduction; Theory; The Riemann Zeta function; Ewald lattice summation; Appendix 1 Using the real space formula; Appendix 2 Integratio
Physical and chemical characteristics of cement composites; Dimensional stability and cracking processes in concrete; Chemical degradatio
Nutrition in the ‘Omics’ era; Nutrigenetics; Epigenomics and nutrition; Early nutrition: Impact on epigenetics; Nutrition and genome health

Part 1 Understanding consumer food choice and acceptance: Integrating consumer responses to food products; Sensory perception as a ba
Breastfeeding and complementary feeding of children up to 2 years of age; Does breastfeeding protect from growth acceleration and later
Questions are presented under the following headings: Milk; Preparation of cheesemilk; Ultrafiltration of cheesemilk; Acidification; Conver
Part 1 Overviews: An overview of materials degradation by stress corrosion in PWRs; Corrosion potential monitoring in nuclear power envi
Einstein’s biggest blunder? Einstein’s theories of relativity; Big bang theory – controversial or not? The Schwartzchild solution and black ho
Metal dusting; The metal dusting corrosion of steels with varying concentrations of chromium; Microprocesses of metal dusting on iron-nic
Modifying flavour: an introduction; Flavouring substances: from chemistry and carriers to legislation; Extraction of flavourings from natura
Linear spaces; Topological spaces; Metric spaces; Normed linear spaces and Banach spaces; Inner product spaces and Hilbert spaces; Linea
Introduction to antioxidants; Chemistry of antioxidation; Antioxidant action in multi-phase systems; Antioxidant protocols for foods and bi
Omega-3 fatty acids: Introduction; Fish oil sources; Microbial oils: Production, processing and markets for specialty long-chain omega-3 po
Introduction; Chloral-derived monomers; Polyimides based on chloral derivatives; TNT-based aromatic diamines; Polyimides based on TNT
The development of atopic phenotypes: Genetic and environmental determinants; Food allergy to proteins; Hypoallergenicity: A principle f
The cholesterol hypothesis – its basis and its faults; Association of high total cholesterol with coronary heart disease mortality differs amon
Part 1 The health benefits of functional dairy products: Dairy components in weight management: a broad perspective; The effects of dairy
Part 1 The artificial cell: Introduction to artificial cells: concept, history, design, current status and future; Polymeric hydrophilic polymers in
The role of ab initio electronic structure calculations in multiscale modelling of materials; Modelling dislocation behaviour at the continuum
Part 1 Overview on copper and aluminium alloys: Corrosion behaviour of non-ferrous alloys in sea water in Polish marine industry; Erosion
European legislation relating to textile dyeing; US legislation relating to textile dyeing; Toxicology of textile dyes; Environmentally responsib
Part 1 Food and obesity: Lipid metabolism: its role in energy regulation and obesity; Hunger and satiety: relation to body weight control; G
Cheese manufacture and ripening and their influence on cheese flavour; Compounds associated with cheese flavour. Part 1 Microbial phys
Introduction; Learning and intelligence; Machine learning basics; Knowledge representation; Learning as search; Attribute quality measure
Part 1 Measurements and reference electrodes: Current state-of-the-art in reference electrode technology for use in high subcritical and su
Preparation of shape memory polymers; Characterization technique for shape memory polymer; Structure and properties of shape memor
Technical background; Experience from 10 plants using methyl diethanolamine (MDEA); Experience from 21 plants using diethanolamine (D
History of sizing systems and ready-to-wear; Creating sizing systems; Sizing standardisation; Sizing systems, fit models and target markets;
Part 1 Structure and function of enzymes: Structure of proteins; Biosynthesis and properties of proteins; Specificity of enzyme action; Mon
Part 1 Key drivers for waste management and co-product recovery in food processing: Waste minimisation, management and co-product r
Historical background; Background to manufacturing practice; Processing plants and equipment; Plant cleaning, hygiene and effluent treat
Examination and conservation of historic and archaeological metal artefacts: A European overview; Corrosion behaviour of low alloy steels
Part 1 Building models for predictive microbiology: Predictive microbiology: past, present and future; Experimental design, data processing
Direct determination of additives in polymers and rubbers; Extraction techniques for additives in polymers; Liquid chromatography; Gas ch
Local electrochemical methods in corrosion research; Observation of self-healing functions on the cut edge of galvanised steel using SVET a
Part 1 Plasma science and technology: The physics and chemistry of plasmas for processing textiles and other materials; The diagnosis of p
Part 1 Types of smart medical textile: Trends in smart medical textiles; Smart woundcare materials; Textile-based drug release systems; Ap
Nature and history of gold; Geology of gold ore deposits; Gold deposition in the weathering environment; Sedimentation and detrital gold;
Dynamic behaviour of tapered beams; GBT-based local and global vibration analysis of thin-walled members; Dynamics of non-prismatic th
Part 1 Dietary salt, health and the consumer: Dietary salt intake: sources and targets for reduction; Dietary salt, high blood pressure and ot
Part 1 Recycling and use of waste as raw materials: Perception towards clothes with recycled content and environmental awareness, the d
Composite forming mechanisms and materials characterisation; Constitutive modelling for composite-forming; Finite element analysis of c
Commercial aspects of TPEs; Styrenic TPEs; TPVS for automotive applications; TPV Developments; Thermoplastic polyurethane (TPU); Copo
Trends and growth; Conductive polymers; New developments in flame retarded polymers for electronics; Polymers in substrates, assembly
Modified Cretan Mediterranean diet in the prevention of coronary heart disease and cancer: an update; Endothelial nitric oxide synthase a
Back to basics; The effects of processing on thermoplastics; Why plastics need to be sorted; Reprocessing of thermoplastic recyclates; Proc
Part 1 Key influences on consumer food choice: Overview of issues to do with food choice; Sensory qualities and food preference; The impa
Chemical migration in food. Part 1 Regulation and quality control of chemical migration into food: Regulation of food contact materials in U
Part 1 The structure and properties of cotton: Chemical structure and properties of cotton; Physical structure and properties of cotton; Cot
Development of the nonwovens industry; Dry-laid web formation; Wet-laid formation; Polymer-laid web formation; Mechanical bonding; T
Part 1 General issues: Design principles of geosynthetics; Material properties of geosynthetics; The durability of geosynthetics; National an
Background to the copper system; Surface preparation; Experiment preparation; Setting the microscope; Running the microscope; Moire p
Reference electrodes in general: Basic concepts; Types of reference electrodes; Potential scales and potential conversion; Reference electr

Microbiological testing in food safety and quality management; Legislation for red meat, poultry and eggs: which way forward? Escherichia
Corrosion of metals in contact with mineral building materials; Corrosion and electrochemistry of zinc in alkaline solution and in cement m
Part 1 Marine by-products characterisation, recovery and processing: Physical and chemical properties of protein by-products from seafoo
Part 1 What are food allergens and allergies?: Food allergy: diagnosis and management; The immune system and allergic responses to food
Part 1 Ageing behaviour and life prediction methods for elastomeric materials: The five year accelerated ageing project for thermoset and
Part 1 Textile structure and moisture transport: Characterising the structure and geometry of fibrous materials; Understanding the three-d
Introduction; Nominal stress approach for welded joints; Structural stress or strain approach for seam-welded joints; Notch stress approac
Part 1 Formation and analysis of hazardous compounds in heat-treated foods: The Maillard reaction and its role in the formation of acrylam
Types of hybrid yarns; Characterization of hybrid yarns; Textile performing; Manufacture of thermoplastic composites with hybrid yarns an
Part 1 Factors that influence interactions between foodborne pathogenic agents and consumers: Introduction to foodborne illness: public
An introduction to welding; Advanced process development trends; Welding power source technology; Filler materials for arc welding; Gas
Part 1 Meat composition and additives: The protein and fat content of meat; The biochemistry of meat; The tenderness of fresh meat; Defi
Introduction - Modifying lipids – why and how? Part 1 Understanding food lipid structure and composition: Vegetable sources of lipids; Lip
Basic human anatomy; Computed tomography scanning; Magnetic resonance scanning; Non contact surface scanning; Export data format

Introduction; The structural hot-spot approach to fatigue analysis; Experimental determination of the structural hot-spot stress; Structural
Factors influencing the growth and development of meat animals; Structure and growth of muscle; Chemical and biochemical constitution
The constant amplitude database; Residual stresses; Variable amplitude loading and testing; Tests under two and three level loading; The i
Part 1 Improving the safety of herbs and spices: Detecting and controlling mycotoxin contamination of herbs and spices; Controlling pestic
Assessment of women’s body beauty; Breast measurement and sizing; Innovations in bras; Bra pattern technology; Innovations in girdles; P
New brewing technologies: setting the scene; Providing cereals for brewing; Developments in the supply of adjunct materials for brewing;
Introduction; Executive Summary; Review of Materials and Properties; Overview of European Electronic Component Markets; Key Trends a
Intelligent textiles and clothing – a part of our intelligent ambience; Methods and models for intelligent garment design. Part 1 Phase chan
Part 1 Factors affecting sweet taste perception: Stimulation of taste cells by sweet taste compounds; Genetic differences in sweet taste per
Principles; Methods used to study surfaces; Adhesion without pretreatment; Pretreatments.
Safety within the legal framework; The safety concept; Standards and regulations; Risk based approach; Goal based approach; Hazards; Th
Part 1 Material requirements and testing: Bullets, bullet fragments and deformation; Material responses to ballistic impact; Modelling balli
A theoretical approach to experimental data; Mass transfer through multi-layer packages alone; Process of co-extrusion of multi-layer film
Overview of biodegradable polymers; The global biodegradable polymers market; The starch-based biodegradable polymer market; The po
Section 1 Transmissions: The investigation of automotive transmission error characteristics subject to operating conditions; Comparison of
A note on food composition; List of figures; Dictionary; Appendix: Table 1 Units of physical quantities and multiples and submultiples of un
‘Local food-nutraceuticals’: Bridging the gap between local knowledge and global needs; Gathered Mediterranean food plants – ethnobota
Long-term consequences of early feeding on later obesity risk; Energy requirements of infants and children; Protein requirements of infant
The dysmetabolic syndrome: Epidemiology and etiology; Traditional Chinese medicine in the treatment of diabetes; Pharmacological and s
Developments in medical thermoplastics; PVC in healthcare; Anti-bacterial polymers for medical devices; Bonding medical plastics; Textiles
Trends and growth in silicone elastomers; Food contact studies; Silicone elastomer materials; Liquid silicone rubber; Pocessing silicone elas
Basic concepts; Solid-state behaviour of polymorphic fats and fatty acids; Liquid- crystalline lipidwater phases; The liquid state; Lipids at th
Infant nutrition and primary prevention: Current and future perspectives; Nutritional interventions in infancy and childhood for prevention
Compressors and novel intake systems; Improved models for cycle simulation; Electro boost systems; Turbines; Mechanical aspects; Additi
Part 1 Identification issues: How bacterial pathogens evolve; Surveillance for emerging pathogens in the United States; Surveillance of eme
Understanding surface wear in engineering materials; Mechanic testing of coatings; The range of surface coating methods; Chemical vapou
Part 1 Technologies: The MIG welding process; Equipment for MIG welding; Shielding gases in MIG welding; Consumables in MIG welding;
Lateral buckling of tapered steel members; Buckling of plates with variable inplane forces; Finite element formulation for plate stability ana
Part 1 Characterisation of engineering materials: The structure of engineering materials; The determination of mechanical properties. Part
The evolution and progression of digital printing of textiles; A designer’s perspective – digital versus traditional. Part 1 Printer / print head:
Part 1 Theoretical background: Fiber mechanics; Yarn mechanics; Fabric mechanics; Clothing mechanics; Human body; Mechanics of huma
Advanced concrete for use in civil engineering; Advanced steel for use in civil engineering; Advanced cement composites for use in civil eng
Psychology and sensory comfort; Neurophysiology and sensory comfort; Physiology of sensory comfort; Physics of thermal comfort; Therm
The base metals markets: History and background; The LME: development and structure; The current position and the future. Aluminium:
Adhesives; Adhesive testing; Infrared welding, resistance welding and hot plate welding. Composite joints; Resistance welding; Pretreatme
Determination of metals; Non-metallic elements; Functional groups and polymer structure; Examination of polymer surfaces and defects; V
Metallurgy of alloys suitable for direct strip casting; Overview of solidification processing; Continuous casting processes and the emergence
The basic principles of breadmaking; A brief history of the Chorleywood Bread Process; Chorleywood Bread Process fundamentals; Ingredie
Part 1 Detection and analysis of food spoilage: Quantitative detection and identification methods for microbial spoilage; Detection, identifi
Part 1 General textile recycling issues and technology: Textile recycling: A system perspective; The design of easy to recycle textile products
Part 1 Characterisation of aroma compounds: The human perception of taste compounds; Processing information about flavour; Sensory a
Part 1 Traceability, safety and quality: Developing traceability systems across the food supply chain: an overview; Using traceability system
Part 1 Signal analysis: Complex analysis; The delta function; The Fourier series; The Fourier transform; Other integral transforms. Part 2 Com

Introduction: Special properties resulting from nanodimensionality; Nanoparticle technologies and applications; Nanometric architectures:
Part 1 Layered silicates: Polyamide/clay nanocomposites; Epoxy nanocomposites based on layered silicates and other nanostructured filler
Rubber to metal bonding; Bonding thermoplastic elastomers; Bonding anti-vibration systems; Innovative rubber bonding systems; Bonding
Understanding materials flammability; Fundamental measurement techniques. Part 1 Flammability tests for buildings and their contents: F
Part 1 Measuring colour: Colour perception; Colour description/specification systems; Instrumental colour measurement; Colour quality ev
Reliability analysis of rolling-element bearings; Functional performance of rolling-element bearings for acceptance in routine applications;
Part 1 Dietary fats and health: Health problems associated with saturated fatty acid intake; Dietary fatty acids, insulin resistance and diabe
The history of chewing gum, 1848–2004; Modern chewing gum; Evaluation and shelf-life; Gum base; Bulk sweeteners used in sugar chewin
Part 1 Fibre, whisker and particulate-reinforced ceramic composites: Fibrous monolithic ceramics; Whisker reinforced silicon nitride ceram
Part 1 The basics of food allergy: The nature of food allergy; Classifying food allergens. Part 2 Types of detection method: The use of antibo
General introduction; Physical and mechanical mechanisms of LSP; Simulation methodology; 2-D simulation of single and multiple LSP; 3-D
What is blow moulding? Design and engineering; Mould design and engineering; The extrusion blow moulding system; Extrusion blow mou
Part 1 Mechanical behaviour of shear joints and design considerations: Basic features; Shear joints in the bearing mode; Clamping, interfer
History of cementitious and polymer technology and their unison; Common polymers used in the formation of concrete and cementitious
Microbial processes in the degradation of fibres; Bast fibres (flax, hemp, jute, ramie, kenaf, abaca); Alginate fibres; Cellulosic fibres and fab
              Basic biomaterials; Healthcare and hygiene products; Infection control and barrier materials; Bandaging and pressure garments; Woundcar
              Part 1 Mathematical and computational background: Vector fields; 2D Fourier theory; The 2D DFT, FFT and FIR filter; Field and wave equat
              Part 1 Process technology and research: Basic knowledge discovery and invention in the birth of new metallurgical processes; Twenty five y
              Part 1 Understanding and evaluating fabric hand: Concepts and understanding of fabric hand; Development in measurement and evaluatio
              Part 1 Risks: Range of microbial risks in food processing; Biofilm risks; Pathogen resistance to sanitisers; Aerosols as a contamination risk; C
              Materials for photoelectrochemical devices; Photosensitive materials; Materials for solar cells; Defect chemistry of ternary oxides; Introduc
              Part 1 Materials and design: Overview of protective clothing; Standards for protective textiles; Fashion and function – factors affecting the
              Part 1 The cotton trade: history and background: History of the cotton trade from origin to the twentieth century; The cotton trade today.
              Global trends in obesity. Part 1 Contributing factors: Nutrient–gene interactions contributing to the development of obesity; Energy metab
              Part 1 Principles: Understanding residual stress and distortion in welds: An overview; Welding heat transfer; Thermal–metallurgical–mecha
              Part 1 Understanding the effects of processing on the properties of metals: The behaviour of metals during high-temperature processing; T
              Copolymer ordering; Templated synthesis for controlled 3D structural control; Surface-induced structure formation of polymer blends; Rap
              Gas metal arc welding; Tubular cored wire welding; Gas tungsten arc welding; Laser beam welding; Nd: YAG laser welding; New developme
              Fiber and yarn identifications; Chemical analysis of feather and down textile materials; Chemical analysis of leather; Analysis of common ch
              Part 1 Introduction to materials (living and non-living): Metals; Ceramics; Polymers; Biocomposites; Cells and tissues; Inflammation and wo
              Testing steel corrosion in reinforced concrete; Alkali-silica reaction (ASR) testing of corrosion in concrete; Acoustic testing of concrete; Elec
              Part 1 Theoretical considerations: Fundamentals in electrochemistry; Electrochemical methods. Part 2 Electrochemistry in textile finishing:
              Molecular modelling of composite matrix properties; Interfacial damage modelling of composites; Multi-scale predictive modelling of crack
              Part 1 Current sportswear market: Market overview; Key trends in sportswear design; Material requirements for the design of performanc
              Preface; Engines; The piston; The piston ring; The cylinder; The camshaft; The valve and valve seat; The valve spring; The crankshaft; Conne
              Part 1 Identifying risks: Pathogens in vegetables; Pathogens in fruit; Measuring microbiological contamination in fruit and vegetables; Pesti
              Bacterial infection of eggs; Pathogen contamination risks in poultry as a risk to human health; Detecting and controlling veterinary drug res
              Flax fibre and its cultivation; Fibre extraction; Yarn formation and winding; Fabric formation; Bleaching; The dyeing of linen; The printing of
              Part 1 Identifying and controlling hazards on the farm and feedlot: Biological pathogens in animals; Detecting pathogens in cattle and mea
              Manufacturing and internal geometry of textiles; Mechanical analysis of textiles; Rheological behaviour of pre-impregnated textile compos
              Part 1 Understanding virulence, stress response and resistance mechanisms: Understanding the behaviour of pathogenic cells: proteome a
              Part 1 Principles: Introducing microwave processing of food: Principles and technologies; Dielectric properties of foods; Measuring the diel
              Analysing casualty records; Accident and all-cause mortality: Economic growth; Supercatastrophes; The technical background; How techno
              Part 1 Fundamentals: Thermodynamics and kinetics of protein/surfactant mixtures at liquid interfaces; Non-Fickian diffusion in systems wit
              The need for biocides in plastics and basic microbiology; Plastic materials requiring biocides; Test methods; Available active ingredients; Le
              Free radical oxidation; Hydroperoxide formation; Photooxidation of unsaturated fats; Hydroperoxide decomposition; Methods to determin
              Fat intake, diet variety and health promotion; Mixed diet in Europe; Influences on food choice and dietary behavior; Age and gender depen

              The use of polymers in construction: Past and future trends; The use of plastics in building construction; Systems for condensation control;
              Maternal nutrition and adverse pregnancy outcomes: Lessons from epidemiology; Metabolic disease: Evolutionary, developmental and tra
              Malnutrition in the developing world: The lack of food scenario; Are older people starving to death in a world of plenty? Physiological vs. p
              The role of immune tolerance in allergy prevention; Prevention of food allergy during late infancy and early childhood; Celiac disease: Effec
              Criteria and classification of obesity in Japan and Asia-Oceania; Exercise and obesity in China; Obesity in childhood: The Greek experience;
              Psychiatric disorders, mood and cognitive function: The influence of nutrients and physical activity; Nutrition and schizophrenia; Managing

             Trends of average food supply in the European Union; Food availability at the household level in the European Union; Energy and nutrient
             Sterilisation qualities and science; General overview of control sterilisation and related methods for healthcare products and polymers; Ste
             Part 1 Forming methods: Fundamental properties of surfaces; Control of polymeric biomaterial surfaces; Organic thin film architectures: fa
             Searching the root of fibers; The new frontier fibers? Superfibers; Carbon fiber expands toward twenty-first century; High-function fiber; Fr
             Aluminium and its alloys; High temperature deformation, Alloys and processing of magnesium alloys; Thermomechanical processing of ferr
             Part 1 Standards for tissue banks and for radiation sterilisation of tissues. Part 2 Methodology in the sterilisation and preservation of tissue
             Part 1 Classification and development: Classification of biodegradable polymers; Polyhydroxyalkanoates; Oxo-biodegradable polyolefins; N
ers, who have discussed test and formulation data. There is an overview paper on the markets for rubbers from the International Rubber Study Group. T
             Electrostatically generated nanofibres for wearable electronics; Electroceramic fibres and composites for intelligent apparel applications; E
             Jute; Flax; Hemp; Ramie; Sisal and Henequen; Coir; Abaca; Pineapple, Curaua; Craua (Caroa), Macambira; Nettle; Sunn Hemp; Mauritius he
             Probability; Conditional probability and independence; Random variables; Continuous distributions; Distribution function; Functions of ran
             Part 1 Fundamentals of adhesive bonding: History of adhesive bonding; What are adhesives and sealants and how do they work? Surfaces:
              The standards; Scope; Terminology; The need to specify welds; The advantages of symbols; Welding symbols: Butt/groove welds; Welding
              Adhesive application; Moulding; Environmentally preferred adhesives; Aqueous adhesives; Troubleshooting; Testing; Markets; Future trend
              Corrosion in reinforced concrete: processes and mechanisms; Monitoring of corrosion in reinforced concrete structures; Numerical modell
              Wheat breeding strategies and end-use requirements for farmers, millers, bakers and other users of cereal products; Using cereals other th

              Introduction to distributions; Further properties of distributions; Generalised functions and fourier analysis; Analytic representation; Multi
              Biodegradability of polymers: Mechanisms and evaluation methods; Biodegradation behaviour of polymers in liquid environments; Biodeg
              Systems dynamics and differential equations; Transfer functions and block diagrams; State-space formulation; Transient and steady state r
              Historical introduction; Nylon fibres; Polyester fibres; Acrylic fibres; Polyolefin fibres.
              Objective measurement technology of woven fabrics; Fabric structural properties; The tensile properties of woven fabrics; The bending pro
              Tidewater; A tug of war over the ocean; Are tides waves? Harmonic constituents: Building blocks of tides; Tidal datums: Finding the appare

ermosets, rubbers, reinforced plastics and coatings) in aggressive and/or corrosive environments.
             An outline of brewing; Malts, adjuncts and enzymes, Water, effluents and wastes; Biochemistry of mashing; Grist preparation; Mashing an
             Perception of body appearance and its relation to clothing; Subjective assessment of clothing appearance; Subjective assessment of clothin
             Why green composites? An introduction; Designing green composites: Traditional and future trends; Life cycle assessment (LCA); Natural fi
             The potential and limits of functional foods in preventing cardiovascular disease; Assessing health claims for functional foods. Part 1 Diet, c
             Introduction to food toxicology. Part 1 Assessing and managing risks: Genetic susceptibility to dietary carincogens; Assessing the mutageni
             Introduction to chemical finishing; Chemical finishing processes; Softening finishes; Hand building finishes; Easy-care and durable press fini
             Part 1 Analysing and modifying starch: Plant starch synthesis; Analysing starch structure; Starch bioengineering; Starch-acting enzymes; Un
             Part 1 Measuring risks: Risk assessment; Modelling exposure; Current mycotoxin limits in food; Sampling for mycotoxins; Mycotoxin analys
             Part 1 Developments in retort technology: Developments in packaging formats for retort processing; Improving rotary thermal processing;
             Introduction: the alloy tree; Group A: Creep resisting low alloy steels; Group B: Cryogenic, nickel low alloy steels; Group C: Martensitic and
             Part 1 Overview: History and cultivation; The world sugar economy today; World sugar prices; Futures markets; Alternative sweeteners. Pa
             Regulatory context in the EU; Diet and the prevention of disease; Functional foods and age-related diseases. Part 1 Bone and oral health: D
             Fatty acids; Diacylglycerols; Phosphoinositides; Lysolipids: sphingosine 1-phosphate and lysophosphatidic acid; Plasmalogens, PAF and othe
             Role for micronutrient interactions in the epidemiology of micronutrient deficiencies: Interactions of iron, iodine and vitamin A; The epidem
             Fibre production: Dyeing of polyester fibres; Nylon dyeing; Acrylic and modacrylic fibres; Dyeing of acetate and triacetate fibres; Mass pigm
             Clinical overview: The changing pattern of clinical aspects of allergic diseases; Changing definitions of allergy; The changing prevalence and
             Metabolic issues of clinical nutrition; Under- and overnutrition: A global perspective; Environmental influences on diseases in later life; Insu
             Types of structural adhesives; Applications for adhesives; Advances in adhesives; Durability of adhesively bonded structures; Applying and
             Part 1 Introduction: General; NCs with ceramic or metallic matrix: NCs with polymeric matrix. Part 2 Basic elements of polymetric nanocom
essing technologies, analysis of bonding techniques, progress in application technology, formulation advancement and business and industry issue.
             Part 1 Processing: Breeding and quality; Husbandry techniques; Stunning and slaughter; Secondary processing; Processing of turkey, geese
             Part 1 Bio/eco composites. Part 2 Characterisation. Part 3 Composite structures. Part 4 Delamination. Part 5 Design and optimisation. Part

              Genetic variation: Nutritional implications; Gene: environment interactions and coronary heart disease risk; Genes, diet and plasma lipids:
              Part 1 Factors affecting shelf-life and spoilage: The major types of food spoilage: an overview; Shelf-life and moisture management; Tempe
              Calculus and infinitesimals; Standard infinitesimal methods; Introduction to non-standard analysis; Applications to elementary real analysis
              Historical evolution of HNS alloys; Production of high-nitrogen bearing steels and stainless steels; Microstructural aspects and thermodyna
              Staphylococcal infection: Emerging clinical syndrome; Epidemiology of MRSA and MSSA; The staphylococcus aureus genome; Virulence gen
              Part 1 Keynote papers. Part 2 FRP strengthening of concrete and masonry structures. Part 3 FRP strengthening of metallic and timber struc
              Introduction: properties of proteins in food systems. Part 1 Sources of proteins: The caseins; Whey proteins; Muscle proteins; Soy proteins
              Introduction to fibre ropes; Rope-making materials; Rope structures; Properties of rope; Rope mechanics; Rope production; Terminations;
              Part 1 Management issues: Identifying potential sources of foreign bodies in the supply chain; GMP, HACCP and the prevention of foreign b
              Part 1 Consumers, texture and food quality: Measuring consumer perceptions of texture: an overview; Consumers and texture: understand
              Part 1 General issues: The functional role of herbal spices; Herbs and spices and antimicrobials; Screening for health effects of herbs; Unde
              Key performance standards; Halogen flame retardants; Metal hydrate flame retardants; Phosphorus flame retardants; Smoke suppressants
              Sunset Yellow; Azorubine (Carmoisine); Copper complexes of chlorophylls and chlorophyllins; Caramel class III; Annatto extracts; Sorbic aci
              Woollen and worsted weaving yarns; Woven fabric construction; Woven fabric design; Design and fabric development.
              Structure of materials; States of matter and physical constants; Mechanical properties and testing; Water; Moisture effects in buildings; M
wet-stick welding operations. It will aid all those seeking to better understand the parameters involved in wet welding, but it also includes many other re
              Numerical computations, geometric computations and arithmetic filters; Interval analysis; Interval Newton methods; The exact sign of sum
              Part 1 Introduction to fatigue in composites: A historical review of the fatigue behaviour of fibre-reinforced plastics; Fatigue test methods,
              Methodology for analysing energy absorbing capacities; Dimensional analysis and experimental techniques; Rings and ring systems; Thin-w
              Part 1 Ingredients: The use of natural antimicrobials; Natural antioxidants; Antimicrobial enzymes; Combining natural antimicrobial system
              Part 1 Methods for authentication and traceability: Advanced PCR techniques in identifying food components; DNA methods for identifyin
s a wide spectrum of topics including cement based composites, ceramic composites and brittle polymer matrix composites. In the papers various topics
              Preface; Executive summary; About KPL; How to use the buyer's guide; Section A: India an overview. Section B: Why source castings from I
              Part 1 Assessing the environmental impact of food processing operations: Life cycle assement (LCA): an introduction; LCA of vegetable prod
              Enzymes; Substrates and their structure; Catalysis and processing; Process engineering and industrial enzyme applications; Practical aspect
              Definition of sausages; Sausage market trends; Product formulation; Production stages; Sausage quality and safety management; Novel pro
              Bread making: an overview. Part 1 Wheat and flour quality: The chemistry and biochemistry of wheat; Assessing grain quality; Techniques
              Metals: Corrosion mechanisms; Corrosion types; Corrosion of some metals in practice; Protection of metals. Concrete: Chemical degradatio
              Part 1 Product safety: On-line detection of contaminants; On-line immunochemical assays for contaminant analysis; Using bioassays in con
              Part 1 Principles: Ecological footprints and urban transportation; The relevance of climate change to future policy on walking and cycling; T
              Part 1 Dynamic behaviour of arc welding: Theoretical analysis; Dynamic characteristics of power sources; Experimental study. Part 2 Weldin
              Part 1 Dairy product safety and quality: The major constituents of milk; Influences on raw milk quality; Good hygienic practice in milk proce
              Trends in aquaculture and captive production; Trends in international seafood trade; Trade by major seafood group; Fundamental principl
              Part 1 Hygiene regulation: The regulation of hygiene in food processing: an introduction; Hygiene regulation in the EU; Hygiene regulation
              The structure of the automotive industry; Markets and the demand for cars; From manufacturers to responsible mobility providers; Sector
              Part 1 General uses: Foam protection in sport; Performance of sports surfaces; Running shoe materials; Balls and ballistics. Part 2 Particula
              Review of yarn production; Textile products and fiber production; Common principles; Filament yarn production; Carding and prior process
              Arc welding - an overview; Gas welding; TIG welding; Plasma welding; MIG/MAG welding; Metal arc welding with coated electrodes; Subm
              Part 1 Food structure and texture: The rheology of emulsion-based food products; Phase transitions, food texture and structure; Phase sep
              Mercerisation and liquid ammonia treatment; Drying and setting; Application methods; Mechanical finishing - traditional and modern; Wa
              INI water waves conference opening remarks; Water wave theory; Logarithmic wind law validity; Accuracy of ocean winds and wind stress;
              Measure on the real line; Integration of functions of a real variable; Differentiation; Abstract measure spaces; Inequalities and the Lp space
              Nisin in multifactorial food preservation; Nisin in the decontamination of animal products; Bacteriocins other than nisin: the pediocin-like c
              Part 1 General issues: Microbiological analysis and food safety management; GMP and HACCP systems; Sampling techniques; Separation an
              Part 1 Types and roles of active and intelligent packaging: active and intelligent packaging: an introduction; Oxygen, ethylene and other sca
              Structure and stability of the ecosystem; The health of our planet; The nature of textiles; Textile fibre production; Yarn production; Fabric p
              Nutritional composition of molokhia (Corchorus olitorius) and stamnagathi (Cichorium spinosum); Nutritional composition of selected wild
              Mathematical modelling in the elementary school; Modelling with middle and secondary students; Post-secondary modelling; Research; Pe
              Overview on metabolic adaptation to stress; Genetic polymorphisms, functional genomics and the host inflammatory response to injury an
              Introduction; Physical chemistry; Analytical methods; Raw materials; Processing of raw materials; Production and properties; Applications;
              Introduction; Carotenoids; Tocopherols, tocotrienols and vitamin E; Other natural antioxidants; Diacylglycerols; Lipase-catalysed synthesis
              Assessment of micronutrient status in mothers and young infants; Setting dietary reference intakes for micronutrients for healthy north Am
              Importance of the ratio of omega-6/omega-3 essential fatty acids: evolutionary aspects; The importance of omega-6/omega-3 fatty acid ra
              Analysis of edible oils by differential scanning calorimetry; Lipid analysis by silver ion chromatography; Analysis of genetically modified oils
              Part 1 The health benefits of phytochemicals: Nutritional phenolics and cardiovascular disease; Phytochemicals and cancer: an overview; F
              Yeast biodiversity; Detection, enumeration and isolation of yeasts; Methods to identify yeasts; PCR methods for tracing and detection of ye
              Section A Research in teaching, learning and assessment; Section B Mathematical modelling competitions; Section C Using technology in th
              Part 1 The Chinese denim industry: Yarn manufacturing in China; Denim fabric manufacturing in China; China denim apparel industry; Distr
              International textile and apparel trading; China’s WTO entry and its impact upon the international textile and apparel trade; USA denim pr
              Sensory analytical methods in detecting taints and off-flavours in food; Instrumental methods in detecting taints and off-flavours; Packagin
              Functions of one variable; Complex numbers; Integration; Infinite series; Matrices and determinants; Vector algebra; Functions of several v
              Introduction: classifying functional dairy products. Part 1 The health benefits of functional dairy products: Cancer; Coronary heart disease;
              Building alliances for local environmental sustainability; Skeletal frameworks: Regional sustainable development frameworks and the issue
              Interactions between stress, food and mood; Mood, cognitive function and nutritional and other supplements; The range of medicinal plan
              Part 1 Policy and support measures: World Trade Organisation; EU Mid-Term Review; US Farm Bill. Part 2 Production: Beef; Sheep meat; Pi
              General considerations in reuse of water: reuse from coloration processes; Reuse of synthetic sizes and water from sizing processes; Reuse
              Traditional methods; Screen printing; Transfer printing; Carpet and yarn printing; Direct print coloration; Discharge, resist and special style
              Summary and conclusions; Flame retardants; Products and their markets; Polymer families and their flame retardancy; End-user market se
             Description of phenomena; Structuring of the contents and general literature references; Modelling of welding temperature fields; Modell
             Ideas and definitions; Trees; Shortest paths; Maximum flows; How to store a network; More about shortest paths; Advanced maximal flow
             Matrix methods; Cartesian tensors; Curvilinear tensors; Large deformation theory; Appendices: A1: Formulae for orthogonal co-ordinate sy
             An introduction to uses of power ultrasound in chemistry; The ultrasonic bath; The ultrasonic probe; Scale-up and flow systems; Sonochem
             Part 1 Overview: The historical performance of Japan’s financial markets; The financial system crisis and the financial Big Bang in Japan. Par
             Part 1 Basic principles: Interaction of EM radiation with materials; Digital imaging and processing. Part 2 2D Optical reflection and confocal
             Introduction to austenitic stainless steels; Uniform corrosion of austenitic stainless steels; Pitting corrosion; Crevice corrosion; Sensitization
             Historical development; The size of the market for fancy yarns; Manufacturing attitudes and the applications of fancy yarns; Introduction t
             <B>Volume 1:</B> Chemistry, biochemistry and cell biology – Overview of the history and development of hyaluronan; Characterization an

              Copper – prion protein, molecular interactions; Effects of copper on the cellular trafficking and biochemical properties of the prion protein
              Part 1 Many-electron atoms: Shell filling in many-electron atoms; Radii and their changes in the main-group elements; Orbital energies and
              The evolution of microbiological risk assessment (MRA). Part 1 The methodology of MRA: MRA: an introduction; Hazard identification; Haz
              Welding of aluminium; Welding metallurgy; Material standards, designations and alloys; Preparation for welding; Welding design; TIG weld
              First pick your standards; Topology or architecture of structured cabling systems; Building blocks of structured cabling systems; Ensuring en
              The mainstreaming of cycling policy; Development of UK cycling policy; Promoting cycling through ‘soft’ (non-infrastructural) measures; Ma
              Defining meat quality. Part 1 Analysing meat quality: Factors affecting the quality of raw meat; Nutritional quality of meat; Lipid-derived fla
              Introduction and review; Statically determinate structures; Deflections of structures; Statically indeterminate structures; Plastic analysis; U
              Chaotic dynamics in a simple aeromechanical system; Random walks with fluctuating step number, scale invariant behaviour, and self-orga
              Part 1 Perceiving and measuring colour: The perception and sensory measurement of colour; Colour measurement of food: principles and
              Part 1 Nutrition and consumers: What consumers eat; Vitamins; Minerals; Measuring intake of nutrients and their effects: the case of copp
              Part 1 Fruit, vegetables and health: Health benefits of increased fruit and vegetable consumption; Antioxidants in fruits, berries and vegeta
              Minimal processing of foods with thermal methods; Minimal processing of foods with non-thermal methods; Modified atmosphere packag
              Part 1 Ensuring safe products: HACCP in the fisheries industry; HACCP in practice: the Thai fisheries industry; HACCP in the fish canning ind
              History and background; Origins and location of copper; Exploration, mining and refining of copper; Fabrication of copper and its alloys; M
              Part 1 Conditions for crop growth: Plants; Soils and soil management; Fertilisers and manures; Climate and weather; Weeds; Pests of farm
              Historical background; Pile fibres; Pile yarns; Yarn processing; Backing materials; The principles of tufting; Patterning systems for tufted; Cr
terms for 16,000 keywords within their field of activity in the German language and vice versa. The dictionary is the link between the Encyclopedia of Te
              Genotypic influences on metabolic alterations during inflammation and the nutritional outcome; Fatty acids and gene expression related to
              Wool production and fibre marketing; Wool scouring, carbonising and effluent treatment; Fibre morphology; Physical properties of wool; W
              General survey; Materials and their properties; Production methods; Products from coated and laminated fabrics; Testing, quality and prod
              What is a ready meal? The development process; Sourcing a raw material; Designing the process; HACCP; Maintaining a clean working envi
              Sources of data; Methods; Some words of caution; Property values for the mushy region; Symbols, abbreviations, units: Aluminium; Cobalt
              Part 1 Refrigeration and meat quality: Microbiology of refrigerated meat; Drip production in meat refrigeration; Effect of refrigeration on t
              Using a scientific calculator; The set of real numbers; Number skills; Algebra: A basic toolkit; Algebra: More tools; Products; Factors; Equati
              Life and times of Harry Wiener; The rich legacy of half a century of the Wiener index; Mathematical and chemical analysis of Wiener’s pola
              Part 1 Risks and their control: Setting up the workplace; First aid and accident reporting; Fire; Compressed and liquefied gases; Fume, dust
              Executive summary; Background: key issues; The supply outlook; Demand outlook; The transport market; Building and construction; Electr
              Executive summary. Part 1 Lead: Key issues: an overview; Supply; Demand; Lead and the environment. Part 2 Zinc: Key issues: an overview
              Executive summary; A background to the key issues; Supply outlook; Demand outlook; The scrap market: stainless steel and nickel; Nickel a
              Executive summary; Historical background: 1990s and the MoU; The developed market economies; The developing market economies; Tra
              Student difficulties with mathematics; Lecturing; Tutoring; Constructing tasks; Marking and commenting; Making use of history; Issues and
              Introduction; Statics; Elasticity; Beams with axial stresses; Torsion of beams; Shear of beams; Energy methods; General theory of beams; St
              Tools of genetic engineering in plants. Part 1 Targets for transformation: Genetic modification of agronomic traits in fruit crops; Genes invo
              Vector spaces; Tensor algebra; Differential manifolds; Vector and tensor fields on a manifold; Exterior differential forms; Differentiation on
              Part 1 Introduction: Cities for the new millennium. Part 2 Metabolism: how urban ecosystems work: It isn’t waste until you waste it; Energy
              Part 1 General issues: Regulation of additives in the EU; Regulation of additives in the USA. Part 2 Analysing additives: Risk analysis of food
              The meteorological scene; Chimneys: purpose and design; Dispersal in theory and practice; Acid rain and development of gas washing; Env
              Introduction; Weave factor and yarn diameter; Maximum construction theories; Standard fabric and degree of tightness applications of fab
              Historical survey; Secondary metallurgy – what does it mean? Secondary metallurgical processes using vacuum technology; Secondary met
              Historical background; Production and properties of textile yarns; Yarn and cord processes; Fabric formation and design of fabrics; Heat-se
              Classification and general properties of colorants; Organic and inorganic pigments; Dye structure and application properties; Chemistry of
              Definition of the polymer; What is failure? Agents and mechanisms of degradation; Real and simulated service conditions; Accelerated test
              Functions and properties of dyeing and printing auxiliaries; The chemistry and properties of surfactants; Classification of dyeing and printin
covers the period from 1997 onwards. Subjects covered include: hairiness measurement; the spinning processes – including DREF, ring, rotor, and worst
ms, hosiery sizing, testing for fit and future expectations.
              Containing chapters on conventional quality management, Zero defects – How not to produce bad work; Inspection, measuring and testing
r update to earlier editions. Used throughout the world in courts of law, customs offices and consumer protection departments. It is the internationally r
              Clothing pipeline fundamentals; Meeting consumer demand; What is QR?; Elements and fundamentals of QR; QR and the retailer - partner
              Part 1 Fundamentals: Introduction to total quality assurance; Modern concepts of quality assurance; Quality control and the use of CEDAC
              Part 1 Introduction: History and background; Potato properties, types and use. Part 2 Economics of the global potato economy: Supply; De
              Historical introduction; Some basic ideas; The Boltzmann distribution and related topics; The approach to gases; More detailed treatment
              Section A Mathematical modelling revisited; Section B Mathematical aspects of modelling; Section C Mathematical modelling and technolo
              New sources, structure and properties of cellulose; Application of enzymes to pulp, fibres and cellulose; Pulp production and processing; S
              Silk; Mohair; Cashmere, camelhair and other hair fibres. Appendices: International trade rules for raw silk and other products of silk; Spide
              The sessions covered the following topics: Gels; Polysaccharide hydrogels; Junction zone formation; Pulp and paper; New pulping methods
              Aramids; Gel-spun high-performance polyethylene fibres; Other high modulus-high tenacity (HM-HT) fibres; Carbon fibres; Glass fibres; Cer
              The origins of texturing; Scientific and engineering principles in twist-texturing; Scientific and engineering principles in other texturing proc
              Smart technology for textiles and clothing; Electrically active polymer materials; Application of nonionic polymer gel and elastomers for art
              Instrumentation for food quality assurance; Instrumental measurements and sensory parameters. Part 1 In-line measurement for control o
              Part 1 What does a textile designer do? An overview of textiles and textile design from fibre to product purchase; The different design disc
              Part 1 Success in developing new food products: Innovation; Society and markets; Management. Part 2 Key requirements: Innovation strat
              Microencapsulation: what it is and its purpose; Microcapsule characterisation: release kinetics/mechanism; Legal aspects; Single core enca
              Quality specifications for herbs and spices; Quality indices for spice essential oils; Organic spices; Aniseed; Bay leaves; Black pepper; Capisic
              General comments on modulus, ductility, stiffness and toughness; General principles of modulus and stiffness; Modulus from constant def
              Novel refrigeration cycles; Thermophysical properties of foods; Cooling/freezing/thawing time and heat load; CFD simulation of cool stores
              Historical perspective; Global forest and wood reserves; Production and consumption of wood products; The place of wood industries and
              Part 1 Introduction to gas trading: Changing nature of the gas trade; Fundamentals of the gas market; The geography of gas; The different
              Executive Summary. Section A: Review of global environmental reporting: Introduction; Background to environmental reporting; Current s
              Part 1 The auditing process: Food standards and auditing; What auditors look for: a retailer’s perspective; Regulatory verification of safety
              Overview; The need for capital; Risks in cross-border exposures and their assessment; Monitoring of cross-border exposures and hedging o
              Part 1 An introduction to transfer pricing in financial institutions: What is transfer pricing? The general theory of transfer pricing; Transfer p
              Introduction: what is structured trade and commodity finance? Impact of different lending rationales on the prospects of repayment; Typic
              Part 1 General influences on quality: Raw materials for extrusion cooking; Selecting the right extruder; Optimised thermal performance in e
              Part 1 Ferrous and non-ferrous metals: Aluminium; Copper; Lead; Iron and steel. Part 2 Precious metals: Gold; Silver; Platinum group meta
              Development of EU law; EU institutions and the legislative process. Part 1 Food safety: Hygiene; Additives; Contaminants; Food contact ma
              Part 1 Principles of modelling: Fundamental approaches: Power and pitfalls of deductive modelling; Problem decomposition; Kinetic mode
              Intuitive ideas; Plane models of surfaces; Surfaces as plane diagrams; Distinguishing surfaces; Patterns on surfaces; Maps and graphs; Vecto
              Encyclopedic from A to Z covering - among others - the following subjects of textile engineering: Environmental protection; Colorimetry; Fi
              A conceptual approach for scientifically based guidelines; Dietary reference intakes: A new approach to setting nutrition standards in the U
              The big picture; The production of spirits; Distribution and regulation; Consumption; Company profiles; Industry profitability; The future; A
              Development of HACCP. Part 1 Small and medium-sized enterprises (SMEs), retailers and HACCP systems: HACCP planning and implementa
              Background and scope; Principles of arc welding; Procedures for specific materials; Manual metal arc process; MIG processes; Cored wire w
              Part 1 Analytical methods: Risk analysis; Quality control and selection; Standardised methods of analysis for contaminants; Future direction
              A brief history of regenerated cellulosic fibres; Industrial cellulose; The viscose process; Lyocell; The cuprammonium processes; Fibres relat
              Electronic commerce and law; How to regulate the internet; Contract law; The content of web contracts; Intellectual property – Copyright;
              An introduction to textile technology; From hand knitting to frame knitting; General terms and principles of knitting technology; Basic mec
              Part 1 General issues: Markets for fried food: the UK, other European countries; Regulation: in the European Union, in the United States; H
              Part 1 Conventional technologies: Retort technology; Continuous heat processing – indirect and direct. Part 2 Measurement and control: P
              Questions are presented under the following headings: Problem solving: A guide; Flours; Fats; Improvers; Other bakery ingredients; Bread;
              Introduction to the fundamental concepts of electrochemistry; Steady state and potential step techniques; Electron transfer; Convective d
              Part 1 Overview: Fertilizers and the environment; A brief history; Fertilizers in the world economy; Overview of manufacturing processes. P
              Debt versus equity; Setting optimum debt/equity ratios: theory and practice; Elements of a group's capital structure; Developing a capital s
              Part 1 Cereal and flour production: Cereal production methods; Wheat, corn and coarse grains milling; Biotechnology. Part 2 Cereal produc
             Part 1 Antioxidants and food stability: The development of oxidative rancidity in foods; Inhibiting oxidation; Measuring antioxidant activity
             Papers are presented under the following headings: Modern materials and processes; Compression and bandaging; Healthcare and hygien

             The metal and its history; Bauxite; Alumina; Primary aluminium; Secondary aluminium; Aluminium products; Applications of aluminium pro
             Polymer combustion, condensed phase pyrolysis and smoke formation; Mechanisms and modes of action in flame retardancy of polymers;
             Classification of biscuits; Dough consistency; Baking techniques; Recipes for hard doughs; Recipes for short doughs; Recipes for extruded a
             Classification of welding processes; Gas welding; Fundamentals of arc welding; Metal-arc welding (Process no. 101); Gas-shielded welding w
             An introduction to textiles, dyes and dyeing; Fibres and textiles: properties and processing; Fibrous polymers; Synthetic fibres; Natural cellu
             Types of hot runner system; Conditions for use of hot runner; Links with technology; Structure of a hot runner; Thermal balance and tempe
             Preliminaries; Basic shapes of geometry; Distance; Degree-measure of angles; Congruence of triangles; Parallel lines; The parallel axiom; Eu
             Constituent materials; Open mould processes; Closed mould (matched die) processes; Filament winding; Pultrusion and other shaping proc
             Basis of thread construction; Characteristics of sewing threads; Thread-production methods’ types of thread package; Thread storage and
             General characteristics of aluminium; Surface preparation guidelines; Joint design and edge preparation; ARC welding power sources; Weld
             The name of the game; Non-co-operative games; Linear programming and matrix games; Co-operative games; Bargaining models; Append
             Interior design; Fabric structures and production methods; Yarn and fabric processing; Quality assurance and testing; Product engineering
             The engineer; Metals; Fabrication processes; Considerations in designing a welded joint; Static strength; Fatigue cracking; Brittle fracture; S
             Technical textiles market - an overview; Technical fibres; Technical yarns; Technical fabric structures – 1; Woven fabrics; Technical fabric st
             Part 1 Review of composite materials: Overview; Fundamentals of composites. Part 2 Fundamentals of finite element analysis. Part 3 Finite
             General principles and perspectives; Specimen preparation; Tension; Compression; Shear; Flexure; Through-thickness testing; Interlaminar
             Classification of designs by symmetry group; Classification of designs by symmetry group and design unit; Classification of discrete patterns
             Impact behaviour of fibre-reinforced composites; Recent developments in impact damage assessment of fibre composites; Modelling impa
             Anticarcinogens and mutagens in the human diet: Epidemiology; Bioavailability of dietary anticarcinogens and mutagens; DNA damage and
             Production; Consumption; Prices and other trade determinants; The major import markets; Exporter’s profiles; Transition economies; Brav
             Basic applied mathematics; Basic physics – electrical; Basic physics – optical; Communications theory; Local area networking and associated
             Part 1 General issues: Regulatory context in the EU; HACCP in the US: regulation and implementation. Part 2 HACCP on the farm and in prim
             Part 1 Origins and production: History; Industry characteristics; Occurrence; Exploration; Mining and concentration; Extraction and refining
             The papers are arranged under the following headings: Applications and new developments; Composite processing; Composite properties;

             Introduction; Specification of an ideal plastic material; Features of the behaviour of structures made of idealised elastic-plastic material; Th
             Part 1 Analysing shelf-life: Glass transition and microbial stability; Modelling shelf-life; Sensory evaluation methods for shelf-life assessmen
             The legal context: due diligence; Diagnostic tests; Symptoms of food intolerance; The treatment of food intolerance; Sources of informatio
             Coal from the earliest times; International discoveries; What is coal? Exploration, mining and production; Treatments and quality assurance
             Genetic transformation of wheat and barley; Genetic transformation of rice and maize; Product development in cereal biotechnology; Usin
             Labelling requirements: EU; Legal labelling requirements: USA; Declaration of ingredients and additives: EU; Declaration of ingredients and
             Composites and pultrusion; The pultrusion process; Profile design, specification, properties and related matters; Thermoset resins for pultr
             Maintaining safety in the food chain; Fruit and vegetables: the quality of raw material in relation to freezing; Pre-treatment of fruit and veg
             Part 1 Materials and processes: Fibres for thermosetting FRP; Thermosetting resins; Moulding processes for thermosetting FRP; Design and
             The development of the oil industry; Economic assumptions; Oil industry accounts; Exploration and production companies; Integrated oil c

             Part 1 The global pharmaceutical industry: Pharmaceuticals and the treatment of disease; Structure and internationalisation of the industr

               The history and origins of tea; Cultivation; Processing; Value added tea; World production; World consumption; Export and import; Market
               Section A Review of global environmental reporting: Introduction; Background to environmental reporting; Current status of environmenta
sts, as well as for those involved in the trading of these materials. The major part of the book is the glossary which contains brief and simple definitions,
               Part 1 The history of sugar: Early history; Sugar in the twentieth century. Part 2 The global picture: The current world picture; Costs of prod
               Part 1 Recommendations: Scope and general; Fatigue design procedures; Fatigue strength; SCF Calculations for CHS Joints; SCF Calculation
               The metals and their history; Mineral deposits; Extraction methods; Metal production; Metal demand and applications; Platinum group me
               Offshore structures, materials and standards; Joining of underwater structures without the use of underwater welding; Underwater engine
               Polysaccharide characterisation; Polysaccharide gelation; Mixed biopolymer systems; High solid systems; Proteins and emulsions; Recent d
               Short history of foreign exchange options; The basics; Option characteristics; The market-place; Put-call parity; Option pricing; Using option
               Introduction to the field; The kinetic background; Substitution reactions of octahedral complexes; Substitution reactions in four- and five-c
               Mechanization and automation systems in the welding workplace; Production organization in advanced workplaces; Work conditions and
              A review of techniques to manage penetration variability during TIG welding; An appraisal of methods for quantifying the performance of u
              Structural integrity of butt fusion welded polyethylene pipes – a review; Ultrasonic and radiographic NDT of butt fusion welded polyethyle
              Guide to high average power Nd:YAG laser processing with fibre optic beam delivery for metals; Durability of structural adhesives and adhe
              The preparation of graded metal ceramic coatings by high velocity oxyfuel (HVOF) spraying – a feasibility study; Design of electromagnets f
              The stress magnification effect of angular misalignment at butt welds; Stress interaction effects in fatigue – a compendium of experimenta
              Behaviour of semi-elliptical cracks in welds with yield strength mismatch; An analysis of fracture under biaxial loading using the finite elem
              Diffractive optical elements for manipulation of CO2 laser radiation – a feasibility study; A review of joint tracking systems for laser welding
              Visual inspection; Liquid penetrant testing; Magnetic particle testing; Eddy current testing; Ultrasonic testing; Radiography testing; Acousti
and then goes on to describe the mechanical properties of styrenic polymers, their electrical properties, and their behaviour in fire. Discussion of key ap
              The consumption of plastics in Europe: How much waste plastic is produced? A summary of recent legislation; Methods of dealing with pla
              Coating defects; Galvanised substrate defects; Post treatment; General defects/handling marks.
nto the structure and properties of these unusual materials. Agricultural and environmental scientists will find its coverage of HS use for soil remediation
              Executive summary Report; The digital signature: technical and legal issues Report; Main practical usages of and emerging implementation
              The chemistry of activated pi-bonds as reactive groups; Activated pi-bonds as reactive groups; Synthesis of (masked) Michael acceptor inte
              Good, safe laboratory practice; Techniques; The s block metals; Boron and aluminium; The carbon group; The nitrogen group; The sulphur
              How to use this book; Writing your weld procedure; Identification of material; Choosing your filler wire; Heat control; Weld techniques; Eq
              Statics; Stress and strain; Geometrical properties of symmetrical sections; Bending stresses in beams; Beam deflections due to bending; To
              O-O design methodology for hybrid systems; Design patterns and formal development; Devising coexistence strategies for objects with leg
              Introduction; Solvation numbers; Ion-solvent distances; Ion-solvent interactions; Acid-base behaviour: Hydrolysis and polymerisation; Stab
              Over 40 papers were presented at the following sessions: Welding and brazing processes; Bonded and mechanically fastened joints; Frictio
              Fundamentals of the strength of materials; Stresses in some common types of structures; Elementary theories of bending and torsion; Basi
              Thermal welding techniques; Early research on welding polymers – introduction to tack; Recent research on the theory of welding thermop
              Growth and functional properties of intermediate foodstuffs; Manufacturing processes; Vegetable-based intermediate foodstuffs; Milk and
              Objectives; Types of distortion; Factors affecting distortion; Prediction of distortion; Discussion; Conclusions and recommendations; Future
              The environment and business - opportunity and threat; Developing an effective strategy for environmental risk management; The legal po
              Paint composition and applications – a general introduction; Organic film formers; Pigments for paints; Solvents, thinners and dilutents; Ad
              Project need; Feasibility study; Contract plan; Project definition; Project functions; Project programming and support information; Planning
              Recognising the need for change; Improving profitability; Preparing for change; Realising all available benefits; Mobilising the rest of the or
              Why are 3-D textile technologies applied to composite materials? 3-D textile reinforcements in composite materials; 3-D textile reinforced
              Introduction; Definitions and basic concepts; Statically determinate structures; Kinematics of structures; Basic concepts of structural analys
              Reinforcements and the reinforcement-matrix interface; Composites with metallic matrices; Ceramic matrix composites; Polymer matrix co
              Introduction and history; Potato production; Potato diseases; Potato variety/cultivars; Receiving and grading for quality; Specific gravity of
              Part 1 The development of the mining company: The history of mining; The development of mining companies - the early years; The develo

              The need; The cover; Links with other insurances; Variations; Pension trustee; Non-profit institutions; Environmental; Relationship to comp
              Lattices and their properties; Ionic structures; Covalent structures; Metallic structures; Molecular structures; Problem solving: Programs on
              Differential equations of first order; Modelling applications; Linear differential equations of second order; Miscellaneous solution techniqu

              Influence of dietary fats on the concentrations of lipids carried in the blood and the significance for health; Dietary fats and cardiovascular
              Introduction: historical developments and modern kinetics; Basic transition state theory; Advanced transition state theory; Basic unimolec
              Solid-phase welding; The use of adhesives for making structural joints; Soldering and brazing; The joining of ceramics: microjoining; Fusion
              Part 1 The driving forces for change: The Darwinian shake-out in financial services; Deregulation and re-regulation; Changing needs and exp
              Key management tools and techniques; Managing change at Abbey National; Building stronger customer relationships through the custom
              Achieving success in services through cultural change; Using vision and mission statements to increase motivation; Mobilising the organiza
              Components of examination; Personnel, qualifications and QA; Procedures; Pre-inspection activities; Inspection for flaws; Inspection for co
              Concepts of fortification; Calcium; Iron; Iodine; Selenium; Copper; Zinc; Magnesium; Mineral fortification in developing countries; Mineral
              Magnetic resonance in food: The developing scene; Water, ions and small molecules in food; Functional constituents of food; Signal treatm
              Part 1 Electronic banking: Backgroud and history; Function of APACS; Global cash management; BACS: practical control issues; Electronic b
              Over 100 papers were presented at the following sessions: Advances in non-UT methods; Structural integrity and NDE; Austenitic compone
              Review of materials and techniques for plate bonding; Materials; Structural strengthening of concrete beams using unstressed composite p

ical expertise in measurement techniques, with typical applications ranging from in situ measurements of strain and rotation on small specimens throug
                Selection of an offshore financial centre; Features of offshore financial centres; Banking; Taxation and offshore centres; Regulation and sup
                Quality challenges; Consumer attitudes to improving crop and food quality; Sustainable production; Effects of post-harvest practice on qua
                Textiles and moisture; Fibre dimensions; Yarn tests; Strength and elongation tests; Dimensional stability; Serviceability; Comfort; Colour fas
rst edition. It has been completely rewritten to incorporate all that has changed in international treasury management since the first edition was written
                Lipids: Global resources and consumption; Studying lipid metabolism; Trans unsaturated fat in health and disease; Dietary fatty acids and c
                Oxidative stress in cardiovascular dieases, cancer and ageing; Oxidative stress and antioxidants in type II diabetes; Dietary intake, bioavaila
                Process developments – TIG welding; Process developments – MIG welding; Consumable developments; Developments in process automat
                Synthesis, analysis, properties and application of common and novel surfactants/emulsifiers; Industrial and substrate application: food, tex
 he use of chemical and physical methodology in seeking an explanation of the structures of humic substances (HSs) and their relation to their microscop
  spinning technology, the economic aspects, and the properties of yarns and fabics produced by this technology.
                Part 1 The nitrate problem in agriculture: Nitrogen dynamics in natural and agricultural ecosystems; Predicting nitrate losses from agricultu
d provides an analysis of weft insertion elements, including a comparison between water-jet and air-jet weaving. Subjects covered include test rigs; air fl
clude the rapid advances in the iron and steel industry.
                Material substrates: Polymers, composites and inorganic surfaces; Established and novel surface modification techniques; Characterisation
 experimental studies on the technology of yarn production and provides an essential guide to this large body of literature. After an introductory chapte
                The shell period; Melting and dissolution of the particle core; Determination of heat and mass transfer coefficients; Calculation and dissolu
. The dictionary covers foundry practice, production and research terminology together with related commercial and industrial management terms.
                DBP formation and occurrence in treatment and distribution; Standards and regulations; Balancing chemical and microbiological risk; Cont
ne of the most important markets in the technical textiles sector. Subjects covered include fibres for automotive textiles; upholstery; carpeting; pre-form
                Mode of action and resistance; Metabolism; Residues in food and the environment; Regulation and risk assessment.
                Waste minimisation; Process optimisation; Recovery, recycling and re-use; New products and processes; Environmental impact analysis.
                Part 1 The LME today: Background, recent history and developments; Roles, clientele and other uses of LME; Market place and daily routin
                An introduction to plastics for non-specialists; Fabrication, inspection and durability; Durability of reinforced plastics in liquid environment
                Bananas; Production; History of the world trade; Banana imports and consumption; International companies; Production in individual coun
                Secton 1 Energy: Turbines with a twist; Power from space; Electricity development. Section 2 Environment: Saving the earth – The whole e
                What money is; Where the world's money is; Who moves the world's money - financial centers and their banks; Who moves the world's m
                Biocorrosion and microbiological influenced corrosion; Metal corrosion; Established and novel methodologies for corrosion monitoring; Co
                Basic concepts and analytical tools; Fundamental features of DSP; Practical DSP devices; Discrete Fourier transform; DSP implementations o
                Thirty-four papers were presented at the following sessions: Sensors/vision – process techniques; Modelling and control; Modelling proces
                The development of the world oil industry; Oil refining; The markets; Entering the futures market; Strategies in futures trading; Options; Ov
                Symmetry everywhere; Symmetry operations and symmetry elements; Group theory and point groups; Representations and character tab
                Introduction; Object detection; Shape analysis; Analysis of roundness/sharpness; Orientation analysis; Arrangement analysis; Conclusions;
                Matrix algebra; Basic structural concepts and energy theorems; The discrete system; Static analysis of pin-jointed trusses; Static analysis of
                Part 1 The industry: The outsider’s challenge; Long term trends and the growth industry; Playing the cycle. Part 2 The company: Market sha
                Mechanisms of wear and corrosion; Weld surfacing; Thermal spray processes; Electrodeposited coatings; Physical and chemical vapour dep
                PWI activities in the field of underwater welding and cutting technologies; Study of physico-metallurgical peculiarities of wet arc welding o
                Tensile failures; Fatigue; Other fibre studies; Textile processing and testing; Case studies – clothing and domestic uses; Case studies – indus
                Flexible textile composite microscopy; 3-D confocal microscopy of glass fibre-reinforced composites; Geometric modelling of yarn and fibre
                The need for competitor analysis; Who are your competitors? Establishing the corporate framework; Establishing the strategic framework;
                Structural and functional properties of polysaccharides; Protein systems; Functional interactions in mixed biopolymer systems; Processing
                The basics; The marketplace; Option characteristics; Put-call parity; Option combinations; Option pricing; Option trading risk; Hedging and
                Origins, growth and potential of dehydration; Factory organisation; Preparation plant; Dryers; Dehydration of potato products; Dehydratio
                Reaction mechanisms; Food technology; Kinetics and analytical aspects; Flavour chemistry; Toxilogical and antioxidants; Health and disease
                Part 1 Directory of manufacturers, agents, suppliers and distributors. Part 2 Databook: Thermoset resins; Comprehensive review; Key to ta
                Overview of the paper industry; Manufacturing and conversion; World consumption; Production, import and export; Forestry; Raw materia
                Background to the biscuit industry; Hygiene and safety aspects; Wheat, flour and other cereals; Sugars and syrups; Fats oils and butter; Da
                Background to the biscuit industry; Hygiene and safety aspects; Problem solving; Types of oven and baking bands; Principles of baking; Pos
                Background to the biscuit industry; Hygiene and safety aspects; Problem solving; Chocolate and chocolate flavoured coatings; Cream sandw
                Background to the biscuit industry; Hygiene and safety aspects; Problem solving; The function of biscuit packs; Types of packaging materia
                Background to the biscuit industry; Hygiene and safety aspects; Problem solving; Types of biscuit dough; Types of dough mixer; Mixing the
                Background to the biscuit industry; Hygiene and safety aspects; Sheeting, gauging and cutting; Laminating; Rotary moulding; Extruding, wir
e undergone dramatic change in recent years. This is the first book to provide a practical overview of the banking systems in the region. It describes the
e spinning and considers materials and equipment available for producing the various types of yarn. Contents include spinning, opening, cleaning, blendi
                Chemistry; Maillard reactions in food; Maillard reaction and health.
 articles since 1985. It is divided into testing of yarns during production i.e. on-line monitoring, the testing of yarn packages prior to packing, and laborat
                Introduction; Inferential data analysis for simple experiments; One-factor designs; One-factor blocking designs; Factorial experimental desi
                Political situation and economic outlook; Trends in wine consumption; The market for reds; The market for whites; Retail channels; Wholes
  stitches, seams, and sewing threads and explains how they are produced, and examines their optimum design, performance, and modes of failure. The
 quality management, and their implementation and utilisation within the textile industry. Ways are suggested of combining them, synergistically, into a
 g pilling, including fibre, yarn and fabric characteristics; the effects of the dyeing and finishing process on pilling; methods of controlling pilling. There ar
                Terminology and definitions; Line of sight guidance; Pure pursuit; Parallel navigation; Proportional navigation; Mechanisation of proportion
                Why blending is necessary; Classification of fibre types and their blends; Dynamic competition between fibre types in the dyeing of blends;
nd its conservation through an enhanced understanding of the chemical processes involved.
ogue covers specialist materials and improves understanding between manufacturers and users when discussing the appearance of surface anomalies. I
                Introduction to quasiat; Quality management; Quality management applied to adhesive technology; Quality management model, PC based
 nvironment and affect all aspects of like, yet they are only very imprecisely understood. This volume presents work on HSs including instruments and tec
                Fire retardancy of polymetric materials: Strategies; Intumescence: Mechanism studies; New intumescent polymetric materials; Flame retar
                Food chemistry under high hydrostatic pressure; Pressure-treated raw milk; HP-treated egg components; High-pressure processed apple an
                Types of biosensors; Application of biosensors to food industry requirements; Development of biosensors.
 cts. Sections cover the types of design and the potential for CAD; simulation of properties and functions; mechanics of textiles; the databases developed
                Fundamentals; Network equations; Network theorems; Networks with inductors and capacitors; Network analysis using phasors; The Lapla
                Part 1 Offshore centres: an introduction; Offshore centres: foreign law concepts and terms; The legal personality of the borrower; Conside

              Wealth: a worldwide perspective; International private banking: a worldwide perspective; Asia-Pacific; The Americas; The Middle East; Dom
              Conflicts of laws; Jurisdiction and forum; Enforcement of foreign judgements; Sovereign risk; Term loan agreements; Loan transfers; Syndic
              Flow-induced alignment in composite materials: current applications and future prospects; Fiber-fiber and fiber-wall interactions during th
              Developments, grades and specifications; Alloy design; Microstructure; Forming and machining; Physical and mechanical properties; Corro
              What is intellectual property? Patents and inventions; Trademarks; Designs; Copyright; Confidentiality; Enforcing intellectual property righ
              Introduction; Nuclear and radiochemistry; Electronic configurations of atoms; Molecular symmetry and group theory; Covalent bonding in
              Organisational structure; Objectives; Information systems; Forecasting systems; Situations management; Managing cash cycle exposure; M
              What is liquidity and how does it arise? Forecasting liquidity; The management of uncertainty; Money transmission and bank services; The
              Part 1 Markets, instruments and trading: History of the markets; The 24-hour market; The exchanges and their contracts; Using exchange-t
              Processes; The metallurgical effects of fusion welding; The behaviour of welds in service; Structures; Pipeline and process plant; The reliabi

             Experimental techniques. Part 1 C-Mn weld metals: Manganese and carbon; Effects of welding process variables; Effects of heat treatment
             Food quality and authenticity indicators; Cereal grains; Fruit and vegetables; Dairy products; Meat, fish and poultry; Oils and fats; Spices, fl
             Management summary; Thinness effect: Constant amplitude fatigue tests on 6mm and 2mm thick specimens; Investigation of ‘hot-spot str
             Risk and reward; What are the banking risks? Solvency risk; Liquidity risk; Credit risk, policy overview; Credit risk, analysing the portfolio; Cr
             Analysis of plant lipoxygenase metabolites; Separations of molecular species of phospholipids by high-performance liquid chromatography
             The Suez canal revisited: 19th century global infrastructure; Operation Mulberry: A floating transportable harbour for World-war II norman
             Introduction; Kinematics of particles; Kinetics of particles: Force, mass, acceleration; Kinetics of particles: Work, energy, power; Kinetics of
             Part 1 Continuous systems: An approach to the laplace transform; Solution of linear-differential equations; Steady state oscillations; Piece-
             Understanding our past; The significance of microorganisms; Some basic chemical differences in foods; Food plant location; Food plant equ
             Signals and linear system fundamentals; System responses; Fourier methods; Analogue filters; Discrete-time signals and systems; Discrete-
             Peroxidation in chemistry and chemical technology; The biological effects of peroxidation; Chain-breaking antioxidants; Preventative antio
             Light, light sources and light interactions; The measurement of colour; Colorimetry and the CIE system; Colour order systems, colour space
             Novel materials and novel applications; Ion chromatography and electrophoresis; Resin as biosorbents; Ion exchange for environmental cle
             Aliphatic compounds; Alicyclic compounds; Carbohydrates aromatic compounds – derivatives of benzene; Isoprenoids (terpenes and stero
             Colloidal properties and sensory perception; Association of emulsifiers; Aggregation phenomena; Interactions between and within interfac
             Birth of new fibers; The super fiber with new performance; High touch fibers; Biomimetic chemistry and fibers; Biopolymer frontiers; Progr
oncentrates on developments in the environmentally-friendly disposal of sludges and on the reawakened interest in composting which has emerged as a
             Process fundamentals; Resin systems; Reinforcement materials; LCM equipment; Preform design and manufacture; Materials characterisat

              Chemoreception and structure-activity relationship; Essential oils and flavour; Creating flavours.
            On banks; Relationships in commercial banking; Relationships in investment banking; Legal and regulatory aspects of banking; The place of
            Flavour of biological origin; Biotechnological production of flavour; Chirality and flavour; Thermally generated flavour; Novel methods of fla
 compounds and other inorganic substances. It provides a valuable guide for chemists involved in risk assessment, health and safety and toxicology.
            Visual methods: Radiographic methods; Ultrasonic methods; Magnetic methods; Penetrant methods; Electrical methods; Other methods.
            Basis of Mössbauer spectroscopy; Practical aspects of the technique; Further consideration of principles; Mössbauer spectroscopy in tin ch
            Gas inclusions; Shell-like defects; Crack-like defects; Massive ruptures/holes; Rolled-in scale; Mechanical damage; Edge defects; Other defe
            General; Fatigue actions (loading); Fatigue resistance; Fatigue assessment; Safety considerations; Appendices; References.
            The welding process and its effects; Types of heat treatment; Effects of heat treatment; Non-compliance in heat treatment practice and po
            Survey of short fibre-polymer composites; Short fibre filled thermoplastics; Thermosetting short fibre-reinforced composites; Short fibre-th
            The changing anatomy of banking relationships; The new realities of relationship banking; Rethinking the role of psychology in banking; Psy
            What is a contract? Parties; Entering in to a contract; The terms of a contract; Standard terms and conditions; The interpretation of a contr
            Microbiology of canned foods; Heat penetration in determinations and thermal process calculations; Metal containers for canned foods; G
having new sections, new products and processes, and covers subjects from creating a business plan and planning a food processing operation, through
            Part 1 Microbiological safety of food: Hazard analysis critical control point system: application in the food industry for microbial safety; Esc
            Analysis of positional isomers of glycerolipids by non-enzymatic methods; 31P Nuclear magnetic resonance profiling of phospholipids; Sepa
            Creating a business plan; Plant location and construction; Food laws, regulations and standards; Kosher and Halal food regulations; A food
            Canning of vegetables; Canning of fruits; Canning of juices, fruit drinks and water; Canning of dry pack products; Canning of marine produc
            Introduction to the project; Building methods, ship structures and welding methods; Welding systems and processes used in the fabricatio

             Part 1 Overview: Development of insolvency law and practice; Insolvency definitions. Part 2 Insolvency of the individual: Causes of insolven
             Section 1 Introduction to crack arrest concepts; Section 2 Recent trends in crack arrest research; Section 3 Application of crack arrest conce
             Part 1 Types of charts: Defining terms; Trends; Reversals: the commoner patterns; Continuation patterns; Volume and open interest; Bar ch
             Section 1 What is performance measurement? History of performance measurement; The benchmarks; Performance analysis; Managemen
             Overview of surface engineering technologies; Electroless nickel coatings: Case study; Thermal spraying: Overview and case studies; Aqueo
             Part 1 Introduction: Recycling and recovery strategies; Municipal waste. Part 2 Waste minimisation: Turning environmental concern into re
             The fibre and non fibre resources; Pulping; Physical and chemical processing of fibre and fibrous products; Physical and chemical processin
             Part 1 Origins, background and production: A brief history; Cultivation; Sugar in its political sociological context. Part 2 The world economy
             Introduction to networks; Recursion; Shortest route; Dynamic Programming; Network flows; Critical path analysis; Linear programming: Gr
             Introduction: Trends in food spoilage and safety, food preservation technologies, the use of ionising radiation; Food irradiation topics from
             Introduction to matrix algebra; The matrix displacement method; Finite element method; Vibration of structures; Non-linear structural me
             Separation processes – an overview; Supercritical fluid extraction and its application in the food industry; Pressure-activated membrane pr
             Design optimisation of constant thickness composite structures; Shells; Constant thickness plates; Constant thickness sandwiches; Design o
             Role of oxidative stress in atherosclerosis and cancers; Role of antioxidative vitamins and carotenoids in cardiovascular disease and cancers
             Grain structure and quality; Wheat protein structure and quality; Nature and functionality of wheat lipids; Rheological properties and func
             Forces in plane pin-jointed trusses; Bending moments in beams; Bending moments in rigid-jointed plane frames; Forces in pin-jointed spac
             Micromechanisms of cleavage fracture; Methodology of the ‘local approach’ to cleavage fracture; Application of the ‘local approach’ to cle
             Part 1 The overview: The overview of the problem; The nature and objectives of retail banks. Part 2 The analysis: The limitations of financia
             The concept of commodity, a market and a derivative; The physical property market; Derivative markets; Approaches to the creation of liq
             Biosynthesis and biodegredation of cellulose; Structure and reactivity of cellulose; Derivatives of cellulose and their properties; Association

             The history of wool production; The production of wool; Wool consumption; World wool supply; Wool prices; The wool trade; The working
             Encyclopedic from A to Z covering - among others - the following subjects of textile engineering: Environmental protection; Colorimetry; Fi
             From ‘Forest Rent’ to ‘Tree Capital’ basic ‘laws’ of cocoa supply; The role of speculative activity in determining international cocoa prices in
             The history of tin; International control, the tin crisis and the free market; Consumption and production; Mining; Smelting and refining; Ref
             Materials handling, including receiving; Cleaning; Quality separation; Peeling; Disintegration - little change in form; Disintegration - conside
             Part 1 Introduction: Grain; A brief history of the grain trade; Grain in the global political economy. Part 2 Production, consumption, trade a
             Part 1 The problem of colour. Part 2 The search for solutions. Part 3 Currently available technologies . Part 4 Novel technologies.
             Scope and field of application; Stresses considered in fatigue analysis; Stress raisers; Fatigue analysis approaches; Guidelines for the choice
             Included are 26 handy reference tables and charts for the food industry, some of which are: Avoirdupois to metric; Moisture content of fre
             Germany; France; The Netherlands; Belgium; Luxembourg; United Kingdom; Ireland; Denmark; Italy; Spain; Portugal; Greece.
             Keynote presentation: Alignment and gripping; Temperature measurement and calibration; Heating equipment and control; Extensometry
             The organisation of banking functions in France; Money and foreign currency markets; French bonds and securities; Derivative markets; Ta
                Background and origins of steel; Properties and applications of steel; Steel products and manufacturing process; Production of iron and ste
 s, and enlarges Allan Ormerod’s Modern preparation and weaving machinery. The book covers all aspects of weaving technology from winding and yarn
 onal multi-partner research project initiated by the European Coal and Steel Community. The significant research results together with newly available d
                Prerequisites from algebra, geometry and trigonometry; Limits and differentiation; Differentiation of products and quotients; Higher-order
 tration through fabrics together with the key parameters that affect their performance - such as porosity, tortuosity, and pressure drop. The theories of
                Landfill and sustainable development; Principles of landfill practice; Biological, Physical and chemical processes within landfill; Landfill gas;
 ies. It covers: publishing; broadcasting; newspapers and journals; advertising and public relations. Each section provides the reader with an analysis of p
                Analysis of exposure to pesticides; Pesticides in foodstuffs; Pesticides in freshwater; Pesticides in groundwater; The removal of pesticides d
                Cellulose – structure, properties and behaviour in the dyeing process; Preparation; Dyeing with direct dyes; Dyeing with reactive dyes; Dye
                The pre-UNCTAD period; Developments since 1964; Factors bearing on the birth and life of commodity agreements; Coffee; Sugar; Cocoa;

  fabrics. Consideration is given to the processes available, the effect of variables in the bonding process, and the influence of fibre structure on the prop
                Part 1 Characteristics: The trading of oil; Physical characteristics and refining; Oil pricing arrangements. Part 2 Instruments and markets: Cr
                Fantasies; Finance; Games; Mathematical programming; Search, pursuit and rational outguessing; Organization and management; Mathem
a concise review which covers everything from history and origins to future prospects. Written in six parts the book begins with a look at the scale and si
                Chemistry in everyday life; Chemistry explained; Radiation and radioactivity; Air: The earth’s atmosphere; The earth’s major metals; Fire an
                A new era of banking and finance; The moral dimension of personal behaviour in banking; The moral dimension of organisational behaviou
                Proteolysis; Protein engineering; Functionality; Pasteurisation.
                Why flux-cored wire? Types of wire; Planning for productivity; Planning for quality; Process economics; Equipment requirements; Standard
                Factors influencing weldability; Potential welding problem areas; Solidification cracking; Lamellar tearing; Hydrogen cracking; Reheat crack
                Improvement of human resources for the food industries; Changes in the food industries; Causes of variations in food manufacture; Differe
                History and background of cotton; The growing of cotton; The genetics of cotton; World cotton production; World cotton consumption.
                Materials for cars; Understanding plastics; Choosing plastics; Interiors; Exteriors; Engine, power train and chassis; Electrics; Recycling; Auto
                The development of the modern construction industry; The present structure of the construction industry; The contractor as developer; Ho
ommunity life and on wider historical developments. It gives a fascinating perspective proclaiming that the history of metals is the history of civilisation;
plications of the dramatic increase in carbon dioxide levels in the atmosphere in the last 50 years and to find ways of mitigating greenhouse gas emission
uced by current computing processes and the various industrial practices employed by major companies for waste disposal and minimization.
                Part 1 Historical background and general principles methods: Heated air; Heated surface; Radiant; Microwave and dielectric energy; Freeze
 istics and their effects on spinning, and processing in the short-staple mill, as well as subsidiary problems in the spinning mill, finishes, blending, and the
                Health problems from exposure to cyanobacteria and proposed safety guidelines for drinking and recreational water; An epidemiological c
                Fibre reinforced polymers; Techniques for manufacture of composites: Manufacturing processes; Finishing methods; Structural design of p
                Cereal crops (botany, chemistry, classification); Storage and pre-processing; Dry milling; Flour quality; Baking; Malting, brewing and distillin
                Materials and properties; Mechanics of material behaviour; Beams, plates and shells; Aspects of design; Manufacture; Metal and ceramic m
                Introduction to microbiologically influenced corrosion; Microbiology; Metallurgy; Electrochemistry; Case histories; Detection, diagnosis and
                The celestial sphere; The sun and sundials; Star positions, star maps, planispheres and nomograms; Light and basic optics; Miscellaneous ca
 conflicts in finance, based on both academic research and the views of professionals on how these issues are faced in practice. It will be essential readin
                Generation of the electron beam; The behaviour of the electron beam on penetrating metal; Welding parameters and advice on welding p
re provides a complete account of the woollen system of yarn production, together with valuable practical assistance, with particular emphasis placed o
                Fundamentals of spinning; Melt spinning; Solution spinning; Spinning for nonwovens; The spinning of highly aesthetic fibres; Fibre spinning
                Introduction and the role of testing; The colourist and colour quality; Chemical principles of colouration; The attributes of fibres; Selection,
                Metallurgical aspects of electrodeposition; Electroplating baths and anodes used for industrial nickel deposition; Engineering applications;
                Pre-Colombian origins; Early Spanish endeavours; Mexico; Central America; South of the Spanish Main; Peru; Bolivia; In praise of horses, lla
                Defining the problem; Guidance on safe welding procedures by graphical methods; Selecting values for graphical presentation; Welding pr
                Aggregation phenomena; Polymer-polymer interactions; Structure, rheology and fracture properties; Interfacial phenomena.
                Characteristics, composition and uses of rice; History of rice; Rise in the post-war world; Rice production; Rice consumption; The internatio
                Part 1 Markets and trade: The structure of the market; Bullion trading centres and transactions; Bullion offtake and international trade; Fu
 racterizing properties for specific fields of application". The remainder of the volume deals with the influence of production processes on the properties
                The relationship between diet and cancer; Occurrence and significance of carcinogens in foods; Diet and tumour initiation; Diet and suppre
                Assessment of an operation; Establishment and implementation of HACCP; Buildings; Sanitation; Personnel; Micro-organisms: An outline o
                General approaches for fracture control; Temperature transition effects; Toughness requirements in industry.
                Introduction; Light and colour; Basis of computer matching; Economic review and cost studies; Colour-measuring instruments; System sele
 sc, double-roving, self-twist, wrap, false-twist, and adhesive processes, together with a detailed consideration of open-end rotor spinning.
               Polymers for microcapsule walls; Microcapsules for multiple emulsions; Biodegradable microspheres; Encapsulation in softgels; Polymer en
               Light and lasers; Principles of laser welding and its characteristics; Industrial applications; Materials; Laser welding parameters and their eff
  this book provides means to estimate the opening profiles of cracks in loaded structures. Equations, non-dimensional graph plots, computer software, b

 -shielded arc welding process and its applications. The author explains the basic process metallurgy of the process and its relationship with other arc we
               Origins and history of silver; Exploration for minerals; Sources of silver; Mining; Extraction and refining of silver; Stocks and inventories of s
               Introduction to Total Quality Management (TQM); Philosophy of TQM; The management of TQM; People and team building; Variation; Sta
               The structure of wool; The theoretical basis for wool dyeing; The role of auxiliaries in wool dyeing; Ancillary processes in wool dyeing; Woo
               Fundamentals; Fracture toughness; Applied conditions; Fracture assessments.
 ture, handling, use and disposal of the chemicals on which we all depend and suggests further action for the protection of both the workplace and the n
               History of the nickel industry; The production of nickel; The consumption of nickel; Major Western nickel producers; The geography of wor
               Ingredients; Processing and microstructure; Materials into structures; Service properties; Applications; Recent research.
 ractions by which microstructures are generated. Part B describes the interdependence between these microstructures and chemical compositions.
               Part 1 Production: Introduction and history of the tomato industry; Tomato culture and production for processing; Genetics in breeding of
               Beating and mixing machines; Chinese snack-making machines; Bread-making machines; Biscuit-making machines; Cookie-making machine
               Part 1 The north American markets: Introduction to the Chicago agricultural futures markets; Definitions; Hedgers; Commodity trading adv
               The TIG welding process; Advantages and applications; Basic TIG welding requirements; TIG welding power sources; Unpulsed/pulsed TIG w
               The engineer and TQM: A positive link; The pioneers of TQM; Defining TQM: The Philosophy; Defining TQM: The systems; Defining TQM: To
               The nature of design; Design process; Design thinking; Creative design: What is the creative process? Techniques in creative design; Creativ
               Natural toxicants in food; Polycyclic aromatic hydrocarbons in food; Food production contaminants; Contaminants from food contact mate
               Metallurgical presentation of the general welding processes and characteristics; Thermal and thermochemical study of welding; Introductio
               R&D and its role in the food industries; The R&D department; Staffing the R&D department; The design and layout of the R&D facility; The
               Process options and manual techniques for welding pipework fabrications; Mechanised arc welding process options for pipework fabricatio

              Fracture mechanics calculations; Fatigue tests; Fatigue test results and discussion; Outcome of the work.
              Toxic amino acids; Lectins; Proteinase inhibitors; Antigenic proteins; Glucosinolates; Alkaloids; Condensed tannins; Cyanogens; Mycotoxins
              Part 1 The present picture: views from the European Commission and industry, comparative studies of food science education in Europe an
              Wood preservation: The biological challenge; Industrial wood preservatives: The history, development, uses, advantages, and future trends
              Nutrition: consumer and regulatory trends; Technology: perceptions of quality, ingredient innovation, new process opportunities; Food co
 matter research. It focuses on composition and structure, water quality, organic matter turnover, humus quality and fertility, and is essential reading fo
              Methods for the analysis of nitrate and nitrite in food and water; Nitrate in water; Origins of nitrate in water; Origin and significance of nitr
              Traditional Feta cheese; Manufacture of Feta cheese - industrial; Halloumi cheese – the product and its manufacture; Manufacture of Gypt
              Current trends in agricultural practice; Analytical methodology; Anthelmintics; Antibiotics; Coccidiostats; Growth promoters and hormones
              Aggregation mechanisms in food colloids; Stability of food emulsions; Protein-stabilised foams; Behaviour of low-calorie spreads; Oil-in-wa
              Part 1 Welded joints under fatigue loading: Fatigue failure; Significant features of welds in relation to fatigue; Factors which affect fatigue o
              Part 1 Dietary fibre, health and the consumer. Part 2 Chemistry of dietary fibre. Part 3 Analytical techniques. Part 4 effect of fibre on the sm
              Introduction to wet-stick welding; Equipment; Electrodes; Health and safety; Welding terminology; Metallurgy; Defects of underwater weld
              Process fundamentals; Applying the TIG process; Mechanised Orbital tube welding; Tube to template welding; Micro-TIG welding; Hot wire
MIG process, are described in detail. The author also discusses some disadvantages of pulsing in order to stress the importance of choosing an appropriat
              Basic joint types; Applicability of processes to joints; Principles of basic characteristics of welding and related processes.
              Fatigue strength for infinite life of welded joints in structural steel; Fatigue strength for finite life and service fatigue strength of welded joi
              Definitions; Indicating welds on drawings; Edge preparations; Distortion; Calculating the static strength of welded joints; Welding procedur
              Micronutrient therapy (including nutrition and cancer, heart disease, allergies and ageing); Diet and nutrition (including diet for children an
              Origins and development: The process, The first twenty years; Development after 1955. Principles: Equipment, Joint preparation and weldi
              Units and dimensions; Density and specific gravity; Fluids; Viscosity; Rheology and texture; Surface properties; Thermodynamics; Heat chan
              Practical considerations; Dyes for wool; Dyes for cellulosic fibres; Dyes for synthetic fibres; Dyeing of fibre blends; Natural dyes; Advanced e
              Physical chemistry essential to dyeing theory; Dye-fibre bonds and their investigation; The influence of fibre structure on dyeing; Thermod
              Acoustic cross correlation; Acoustic emission; Coating thickness; Dye penetrant examination; Eddy current testing; Emission spectroscopy;
              Food colloids in practice; Theory and practice of formation and stability of food foams; Colloidal properties of model oil-in-water food emu
              Part 1 Biosynthesis and chemical structure: Structural studies of plant cell-wall polysaccharides using enzymes; A new method of enzymic a
              The relevance of food structure; Mixed and filled gels; Gel structure of food biopolymers; The structure and stability of emulsions; Structur
              Fundamentals of fibre structure; Natural polymer fibres: Cellulose fibres; Rayons; Cellulose ester fibres; Protein fibres; Miscellaneous natur
              Fibres for clothes; Natural fibres of vegetable origin: The bast fibres: Flax; Jute; Hemp; Sunn; Kenaf; Urena; Ramie; Nettle; The leaf fibres: S
              Functional design of coloration machines; Fluid flow, heat transfer and mass transfer; Corrosion; Fabric transport and fabric control; Instru
 external appearance, the structure of the zinc coating and other characteristics. The development of the defect is described, and the possibilities of con
              An historical introduction to weaving; A technical introduction to weaving; An introduction to weaving preparation; Winding; Warping; Sla
              Fundamental concepts; Rheometry for polymer melts; Physical features and flow; Rheology and structure; Adventitious flow phenomena;
 e to Watson’s textile design and colour. It represents a continuation of the subject and deals with compound woven structures. This edition was revised
ublished in 1912 and has been revised several times by the original author and a number of other well respected textile experts. This edition revised by Z
gues” provide information on the possible causes of defects and their early detection and removal.
              Authors biography                                                                                               BIC


                                                                                                                             TGBF
               J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                                                                                                                             TBG
               Frank Wardle is Managing Director of UPM Ltd – a research and development company specialising in Ultra Precision equipment. He has m
                                                                                                                             TGB
               J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                                                                                                                             TDC
nergy and environmental applications of membrane reactors. Part 3 Biomedical and biochemical applications of membrane reactors. Part 4 Economics o
                                                                                                                             THF
 Part 2 Improving ultra-supercritical coal power plant performance: Materials degradation issues, emissions and process control. Part 3 Optimising ultra-
                                                                                                                             TGMD5
structures; Diagnosis and prediction of the residual life of welded structures; Acoustic emission techniques for testing welded structures; Processing test
                                                                                                                             TGBN
 ation fuels. Part 3 Internal combustion engines. Part 4 Powertrain, control technology and vehicle lightweighting. Part 5 Base engine development and h
                                                                                                                             THX
 niques and technology. Part 3 Biofuels production and biorefinery power engineering. Part 4 Chemicals, materials and high value products from total bio
                                                                                                                             TQSR
oduction processes. Part 3 Biogas plant design, engineering and process optimisation technologies. Part 4 Biogas utilisation, international experience and
                                                                                                                             THK
 rnational experience in radioactive waste management and contaminated site clean-up. Part 3 Non-power industry radioactive waste management and
ssessment of components containing defects. Part 4 Maintenance and operation of power plants.                                THF
tional case studies/lessons learned.                                                                                         THF
 als challenges and developments. Part 3 Wind turbine blade manufacturing, testing, operation and maintenance.               THX
                                                                                                                             TDCT
               Dr Bimlesh Mann is Principal Scientist (Livestock products Technology) at National Dairy Research Institute, Karnal, India
                                                                                                                             KNBC
 erisation, chemistry and utilization parameters. Part 3 Coal supply chain, mining, upgrading and handling. Part 4 Coal utilization and applications.
                                                                                                                             TDPH
               Dr. G. Thilagavathi, Professor and Head of the Department of Fashion Technology, PSG College of Technology. Mr. M. Parthiban and Mr. S.
 eactor materials. Part 3 Membrane reactor design, simulation and optimisation.                                              TDC
                                                                                                                              using
 obioreactor; Transport phenomenon in photobioreactors; Ocean, the ultimate carbon reservoir; Recycling CO2 to biofuelsTHX microalgae; Biodiesel pr
                                                                                                                             THK
               Dr Gennadij V. Arkadov and Prof. Alexander F. Getman of the All-Russia Scientific Research Institute for Nuclear Power Plants Operation (V

n fermentation technology. Part 3 Use of microorganisms for the production of natural food ingredients and nutraceuticals.    TDCT
ds. Part 3 Using new analytical approaches to verify the origin of certain commodities.                                       TDCT
 development. Part 3 Use of advanced structural alloys to mitigate critical materials degradation.                            THF
                                                                                                                              THK
rials. Part 2 Materials ageing and degradation in light water reactor (LWR) components. Part 3 Materials management strategies for light water reactors
2 Non-microbial contaminants of nuts. Part 3 Improving nut quality.                                                           TDCT
                                                                                                                               and
Ca) looping technology. Part 3 Fundamentals of chemical looping combustion (CLC) technology. Part 4 Advanced conceptsTHF developments in calcium
                                                                                                                              THX
ation. Part 2 Biomass combustion and co-firing: science, technology, optimisation, modelling. Part 3 Bioenergy plant engineering issues and applications.
misation. Part 3 Construction, operation and maintenance. Part 4 Economic analysis and conclusion.                            THX
                                                                                                                              TDCT
                Dr K.J. Venugopal is heading the Quality, R&D and Agro project functions of AVT McCormick at Cochin, Kerala. This company is a joint vent
                                                                                                                              THR
ment and application of electricity transmission and distribution networks and technology. Part 3 Development and application of electricity storage syst
                                                                                                                              TGB
                Mahmood Aliofkhazraei is a PhD researcher in the Corrosion and Surface Engineering Group at the Tarbiat Modares University in Tehran, Ir
                                                                                                                              TDH
                Bohuslav Necká? is professor, Dept. of Textile Technology, Technical University of Liberec, Czech Republic.Dipayan Das is assistant professor,
                                                                                                                               his
                Samrat Mukhopadhyay is assistant professor with the Department of Textile Technology, IIT Delhi. He has toTDHcredit 15 International refe
                                                                                                                              THK
 developments; Safety assessment, analysis, and modelling; Risk assessment. Part 2 Applications: Light water reactors; Heavy water reactors; Fast reacto
                                                                                                                              TTB
  optical elements (DOE) in the geometrical optics approximation; Calculation of DOE in the scalar approximation of diffraction theory; Multi-order DOE;
                                                                                                                              TTBM
for generation and detection of terahertz waves; Fundamental aspects of terahertz spectroscopy and sensing; Fundamental aspects of terahertz imaging
                                                                                                                              KNTR
 ctions; Packaging and legislation; Packaging and environmental sustainability; Packaging and marketing. Part 2 Packaging materials and components: Gla
                                                                                                                              TDH
  failures; Factors affecting ssewn seam performance. Part II Adhesive bonding of textiles: Types of adhesive and methods of application; Surface requirem
                                                                                                                              MBG
s;Testing bond strength; Adhesives in bonding and sealing of medical devices; Modeling joints in medical devices. Part 2 Processes: Microwelding in med
                                                                                                                              MNP
pment of breast implants; The chemistry and physical properties of silicones; Cohesive gel breast implants; Polyurethane foam breast implants; Other ty
                                                                                                                              R856
ctro-chemical biosensors; Piezoelectric sensors; Electronic nose technology; Catalytic sensors; Nano-wire arrays; Nano-sized biosensors; Ion channel bio
                                                                                                                              TDH
s and their implications for textile products and processes; The impact of environmental regulation on future textile products and processes. Part 2 Deve
                                                                                                                              TGM
re; A process for the evaluation and selection of biomaterials; Biological safety evaluation planning; Physio-chemical characterization of medical devices
                                                                                                                              THK
anagement. Part 2 RPV embrittlement database: PWR embrittlement; BWR embrittlement; Magnox embrittlement; VVER embrittlement. Part 3 Embrittl
                                                                                                                               and
 e. Part 2 Applications: General surgery; Cardiac Surgery; ENT and Eye surgery; Urology; Orthopaedic surgery. Part 3 EthicsMBGemerging applications: Et
 ainable economics; Quantifying sustainability. Part 2 Earth: Material balances; Urban agriculture; Brownfields; Urban heatTHX island. Part 3 Wind (air and lig
                                                                                                                              TGM
rials/biomaterials; Nano-reinforced materials/biomaterials; Coatings. Part 2 Drug delivery systems: Targeted nano delivery systems; Peptides for targete
                                                                                                                              MMD
 el; Enamel matrix proteins for regeneration of periodontal defects; Sol-gel derived glass ceramics; Enamel/dentin as substrate for adhering composite re
                                                                                                                               Part
 electron microscopy and crystal orientation mapping of metallic films; Transmission electron microscopy of metallic films.TJFD 2 Deposition and process
                                                                                                                              KNDD
nt-based textile fibres; Process control in blowroom an carding operations; Process control in drawing and combing of yarn; Process control in ring and r
                                                                                                                              TDH
mputational fluid dynamics (CFD); Finite element modelling. Part 2 Simulation and modelling of specific textiles: Yarn structures; Textile structures: wove
                                                                                                                              TJFD
omotive vehicle stability control; MEMS for automotive tire pressure monitoring; MEMS for automotive engine management; MEMS for active friction co
                                                                                                                              TTA
lling software code; The capacity of the new version of ATILA; Loss integration in ATILA software. Part 2 Case studies in designing devices: Thermal analy
                                                                                                                              MMP
vascular imaging; Musculoskeletal imaging; Whole body imaging; PET imaging; Intravascular MR; Imaging stem cell therapies. Part 2 Biomaterials and pr
                                                                                                                              TGXW
 2 Processing: Primary production; Alloying behaviour and alloy design; Deformation and forming; Corrosion and surface finishing; Powder metallurgy.
                                                                                                                              TDCT
nents carried and the difficulties they present; Building blocks for delivery systems; Interaction of delivery systems with the GI tract. Part 2 Processing te

                                                                                                                                  THX
 s. Part 2 Hydrogen production and storage: Hydrogen electrolysers; Hydrogen production; Hydrogen storage. Part 3 Fuel cells: Fuels; PEMFC membrane
                                                                                                                                  TDCT
niques for the detection of chemical contaminants and residues in foods; HPLC-MS techniques; Immunochemical-based screening techniques; Bioassays;
                                                                                                                                  THK
 ceptability; Economics and sustainability. Part 2 Uranium and thorium nuclear fuel cycle: Production of uranium and thorium; Uranium enrichment; Fue
sation and grain growth; Dynamic recrystallisation. Part 2 Microstructure evolution in the processing of particular metals: TGXW  Modelling phase transformatio
                                                                                                                                   range
  wholegrain foods; Dietary fibre analysis in foods; Health aspects of dietary fibre; Health aspects of wholegrain foods; TheTDCT of fibre dietary ingredie
                                                                                                                                  TDCT
 Hyperspectral and multispectral imaging; Other image acquisition methods; Image processing techniques. Part 2 Computer vision in different food and b
                                                                                                                                  THX
Life cycle assessment (LCA) and sustainability; Waste types, properties and analysis. Part 2 WTE systems, engineering and technology: Waste processing
                                                                                                                                  TTBL
               Alexei Baranov and Eric Tournie, CNRS Electronics Institute of the South (IES - CNRS UMR 5214) and the University of Montpellier 2, France
ons in solids; Piezoelectricity and basic configurations for piezoelectric transducers; Electromagnetic acoustic transducers TTA  (EMAT); Modelling ultrasonic t
                                                                                                                                  MBG
dry heat sterilisation; Radiation sterilisation; ETO sterilisation; Plasma sterilisation; Packaging for sterilized medical devices; Sterilisation techniques for p
                                                                                                                                  TDCT
y; SCADA and related systems. Part 2 Instrumentation and techniques for automated process control: Introduction to sensors; Optical sensors and online
                                                                                                                                  TDH
es; Natural fibres: animal fibres and silk; Synthetic fibres: regenerated cellulose fibres; Synthetic fibres: polyester, aramid and polyamide fibres; Synthetic
                                                                                                                                  RNH
d RoHS directives; The present recast of the WEEE directive; The WEEE forum and the LABEX project; Global trading in waste electronics; Refurbishment
                                                                                                                                  TGM
 ssure vessel design requirements (ASME VIII); Pipeline design requirements; Material information; Stress; BS7910 code; BS7910 example assessments; A
                                                                                                                                  TDCJ
ransport in fluid systems; Development of theoretical models; Numerical solution of dynamic equations; Principles of control; Control of dyeing processe
                                                                                                                                  THX
n from fossil to bio; Renewable feedstocks; Chemical transformations of feedstocks; Formulated lubricating oils; Quality assurance of biolubricants; Prod
                                                                                                                                  MBG
tions; Surface modification of textiles; Sterilisation techniques for biotextiles; Regulation of biotextiles for medical use; Assessing the effectiveness of bio
 luorescence from a coherently driven quantum dot in a microcavity. Part 2 Nanolasers with quantum dot emitters: Highly TTB        efficient quantum dot micropi
 rt 2 Applications: Electrochemical and impedance sensors for cell-based measurements; Smart microgripper for BioMEMSMBG           applications; Lab-on-chip devi
                                                                                                                                  TGM
tes; Graphite sheets as fillers in polymer nanocomposites; Calcium carbonate nanocomposites. Part 2 Types of polymer nanocomposite according to bas
                                                                                                                                  TGM
micro-packaging techniques; Biofuel cells - implantable power sources; Packaging and coating materials for devices; Implant interface; Micro electro mec
                                                                                                                                  RNQ
 c chemistry of the actinides; Aquatic chemistry of fission and activation products; Significance of natural organics; Microorganisms and radionuclide che
                                                                                                                                  TGM
mers for biomedical applications; The effect of molecular structure on the mechanical properties of biomedical polymers; Using biomedical polymers: the
                                                                                                                                  KND
Thermoplastic based processing: Sheet forming; Filament winding of thermoplastics; Thermoplastic tape replacement. Part 3 Thermoset based processin
                                                                                                                                  TDH
ent in polymer matrix composites; Carbon and polymer nanofiber reinforcements in polymer matrix composites; Inorganic functional nanofibers; Surfac
                                                                                                                                  TNC
rt 2 Materials: Brazing of alloys; Brazing of cutting materials; High temperature brazing; Brazing of diamonds; Brazing of oxide; Brazing of nickel; Alumini
                                                                                                                                  TJFD
 emiconductors for photonic devices; Emerging pulsed laser deposition techniques. Part 2 Laser patterning and lithography: Maskless laser lithography; 3
                                                                                                                                  MBGL
rosthesis for hip resurfacing arthroplasty; The design rationale for the Depuy ASR™ system; Conserve® Plus prosthesis for hip resurfacing arthroplasty; C
                                                                                                                                  THX
  assessment. Part 2 CSP system developments: Linear Fresnel; Parabolic trough; Central tower; Parabolic dish; Concentrated photovoltaics; Thermal ene
                                                                                                                                  TDH
 reparation for weaving: winding and warping; Yarn preparation for weaving: sizing; The fundamentals of weaving technology. Part II Woven structures: W
                                                                                                                                  TDH
ary equipment requirements; Anthropometric methods for design of military clothing; Psychological issues in military uniform design; Colour and camou
                                                                                                                                  TDCT
produce; Microbial decontamination of raw and ready-to-eat meats; Microbial decontamination of poultry carcasses; Microbial decontamination of sea
                                                                                                                                   in MIM;
  metal injection molding; Powder binder formulation and compound manufacture; Tooling for MIM; Molding componentsTGXW Debinding and sinter
                                                                                                                                  TDCP
nded joints for ship applications; Designing adhesively-bonded joints for wind turbines; Predicting the failure of bonded structural joints in marine engin
                                                                                                                                  TRP
  aeronautics; Morphing concepts and technologies to change the aerodynamic shape of aircraft to suit flight conditions; Jet engine design drivers: past, p
                                                                                                                                  TVT
ase control; Crustacean immune responses and implications for disease control; Mollusc immune responses and implications for disease control; Produc
                                                                                                                                  TGB
               Professor David Murray-Smith is Emeritus Professor and Honorary Senior Research Fellow at the School of Engineering at the University of
                                                                                                                                  TGB
               Professor José Meseguer is a Full Professor of Aerospace Engineering at the Universidad Politécnica de Madrid (UPM), and the Director of ID
                                                                                                                                  TDH
 lame retardancy of natural fibres; Improving the chemical properties of natural fibres; Ultraviolet blocking properties of natural fibres; Electrokinetic pro
                                                                                                                                  TJFD
 ed films; Materials science concepts for printed films; Properties of printed films as electrical components on ceramic substrates; Conduction mechanism
                                                                                                                                  THF
 ne systems and components: Compressors; Combustors; Turbines; Heat exchangers and heat recovery processes; Turbogenerators; Materials and coatin
                                                                                                                                  TDH
 hmere and other hair fibres. Part 2 Improving natural fibre production through breeding and cultivation: Developments in fibrous flax breeding and cult
                                                                                                                                  TDCT
 rage packaging: Controlled release packaging; Active antimicrobial packaging; Active nanocomposites for packaging; Edible chitosan coatings for fresh a
                                                                                                                                  TGM
               Jen? Gubicza is an associate professor at Eotvos Lorand University in Budapest, Hungary, Chairman of the Diffraction group of the Roland E
                                                                                                                           TG
             The Institution of Mechanical Engineers (IMechE) is one of the leading professional engineering institutions in the world.
                                                                                                                           MBG
Biology of implant wear; Biomechanics of the hip and knee; Anatomy of the hip and suitable prostheses; Anatomy of the knee and suitable prostheses; O
                                                                                                                           Ginger;
rika and cayenne pepper; Cardamom; Chives; Cinnamon; Clove; Coriander; Cumin; Curry leaf; Dill; Fenugreek seed; Garlic; TDCT Marjoram; Mint; Must
                                                                                                                           He has
             Anant Sahay is a highly experienced IT Professional working in the Commercial Aviation industry since 1982. TGB hands on experience in

                                                                                                                           TNK
ncy; Hygrothermal behaviour and occupant comfort; Acoustic behavior, cavity insulation and thermal bridging; Techno-economic analysis and environme
                                                                                                                           TDM
hase transformations in ferrous alloys; Thermodynamics of phase transformations in steels; Fundamentals of diffusion in phase transformations in steels
                                                                                                                           TDM
 phology and substructure of martensite in steels; Kinetics of martensite transformations in steels; Shape memory in steels; Tempering of martensite in c

                                                                                                                                TDCT
 oxidants in herbs and spices on shelf life of foods; Ajowan; Aniseed; Asafoetida; Allspice; Capers and caperberries; Caraway; Celery; Chervil; Fennel and
                                                                                                                                TDCT
organisms and animal by-products: Ecology and control of bacterial pathogens; Detection and enumeration of microbiological hazards; Microbiological ri
                                                                                                                                TGB
                Professor I. M. Low is the current WA Branch President and Federal Secretary of the Australian Ceramic Society. Since 2008, he has served
                                                                                                                                TDCT
 iated with meat, poultry and seafood packaging; Major microbiological hazards associated packaged meat, poultry and seafood; Sustainable packaging o
                                                                                                                                MBNH3
ated immune system; Inflammation and chronic inflammatory diseases; Chronic low grade inflammation. Part 2 Food constituents, immunity and inflam
                                                                                                                                MNB
ardiopulmonary bypass (MCPB); Anticoagulation protocols for minimized cardiopulmonary bypass; Minimized extracorporeal circulation: physiology and
                                                                                                                                TDCT
d flavourings: Natural food and beverage colourings; Natural low-calorie sweeteners; Natural food and beverage flavour enhancers; Natural antioxidant
                                                                                                                                TDH
 ng room; Preparation and quality control of textile materials prior to spreading; Lay planning and marker making; Principles and methods of textile spre
                                                                                                                                TDM
ormation mechanisms; Deformation twinning and procesing; Superplasticity; Dynamic recrystallisation. Part 2 Processing and applications of magnesium
                                                                                                                                TDCT
mistry and biochemistry of wheat; Techniques for analyzing wheat proteins; Wheat proteins and bread quality; Wheat starch structure and bread qualit
                                                                                                                                THF
ed gasification combined cycles; Humid air turbine cycles; Oxy-combustion turbine cycles; Pressurized coal combustion combined cycles; Externally fired
                                                                                                                                TDCT
  nanoscale materials in the food industry; Potential health risks of nanoparticles in foods, beverages and nutraceuticals; Detecting and characterizing na
                                                                                                                                TDH
                Dr Colin Atkinson is a leading consultant to the textile industry in issues affecting textured yarns with over 30 years experience. He is a form
                                                                                                                                TGM
 ic principles of stem cells: Basic principles of human embryonic stem cells; Basic principles of induced pluripotent stem cells; Basic principles of amniotic
                                                                                                                                TDCJ
 ion: consequences for occupational environments; Colour illusions and the human visual system; Colour psychology: the emotional effects of colour per
                                                                                                                                TGM
gery: The challenges of bringing a medical device to the spine market; Introduction to spinal pathologies and clinical problems of the spine; Forces on th
                                                                                                                                TDCK
on for corrosion resistance; Laser surface melting to repair stress corrosion cracking in weld metal; Laser surface melting of stainless steels for mitigating
                N Gokarneshan is principal at NIFT TEA College of Knitwear Fashion, tirupur, India                              TDH
                                                                                                                                TGB
                Professor Vladimir Aslanov is Head of the Theoretical Mechanics Department of Samara State Aerospace University in Russia. He is a Dr. Sc
                                                                                                                                TGM
applications: an overview; Advanced metal-forming technologies for automotive applications; Nanostructured steel for automotive body structures; Alum
                                                                                                                                TGB
                Dr. Maziar Ramezani is currently a Post Doctorate fellow at School of Mechanical Engineering, Universiti Sains Malaysia, Malaysia.Dr. Zaidi M
                                                                                                                                THX
                Dr Christoph Hartnig works at Chemetall GmbH and formerly headed research departments at both BASF Fuel Cell GmbH and the Center fo
                                                                                                                                TBN
 mics in nanoscale device; Spin dynamics in nanoelectronic devices; Spintronics and Spin Hall effects in nanoelectronics; Graphene and carbon nanostruc
                                                                                                                                THX
                Dr Rafael Luque is the Ramon y Cajal fellow at the University of Córdoba , Spain. Professor Juan Antonio Melero is an academic researcher a
                                                                                                                                TGB
                J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                Mike Driver is Biomaterials Business Director at Vertellus Specialties UK Ltd. He has been instrumental in theTGM development of new material
                                                                                                                                THX
                Dr Christoph Hartnig works at Chemetall GmbH and formerly headed research departments at both BASF Fuel Cell GmbH and the Center fo
                                                                                                                                TDCP
                Dr Paul Robinson, Dr Emile Greenhalgh and Dr Silvestre Pinho all work in the Department of Aeronautics at Imperial College London, UK. Th
                Dr Damien Féron is Director of Research at the Nuclear Energy Division of the Atomic Energy and AlternativeTHK    Energies Commission (CEA), a
                                                                                                                                THK
                Dr Michele (Mike) Laraia is a private consultant and a former Unit Leader, IAEA Waste Technology Section (1991-2011), responsible for nuc
                                                                                                                                TDCK
                Dr Viswanathan S. Saji works in the Department of Advanced Materials Chemistry in Korea University, South Korea.Dr. Ronald Cook works a
                Dr Ziad Melhem is Key Accounts Manager at Oxford Instruments (OI), UK. He is widely regarded for his work THR    in applied superconductivity, w
                                                                                                                                TDPH
                Dr J. Hayavadana is prof and head with Dept of Textile Technology, University College of Technology, Osmania University, India
                                                                                                                                THK
                Agustín Alonso is Emeritus Professor and Chair of Nuclear Technology at Madrid Polytechnic University, Spain, and serves on the IAEA’s Int
                                                                                                                                  has
                Dr Gordana Colovic is a professor at The College of Textile Design, Technology and Management, Serbia. SheTDH authored 3 books and sev
                                                                                                                                TGXW
                Professor Viktor P. Astakhov works in the General Motors Business Unit, USAStefan Joksch is the Technical Director at Oemeta Chemische W
                                                                                                                                TNK
                Dr Nicolas Roussel is a researcher at the Institut Français des Sciences et Technologies des Transport, de l’Aménagement et des Réseaux (IF
                                                                                                                                TG
                J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                                                                                                                                TDCT
                Dr John Piggott was until recently Reader in Food Science at University of Strathclyde, where he worked for many years on sensory analysis
                                                                                                                                TDM
                Richard P. Gangloff is the Ferman W. Perry Professor of Materials Science and Engineering at the University of Virginia, Charlottesville, VA, U
                Adrian P. Mouritz is Professor of Aerospace Materials at RMIT University, Australia.                            TGM
                                                                                                                                TGM
                Mahesh C. Chaturvedi is Professor Emeritus in the Department of Mechanical and Manufacturing Engineering at the University of Manitob
                                                                                                                                TDH
                Dr. Lena Horne is an Associate Professor in the Department of Textile Sciences at the University of Manitoba, Canada and is widely regarde
                                                                                                                            TDM
            Richard P. Gangloff is the Ferman W. Perry Professor of Materials Science and Engineering at the University of Virginia, Charlottesville, VA, U
                                                                                                                            TGBN
            The Institution of Mechanical Engineers (IMechE) is one of the leading professional engineering institutions in the world.
                                                                                                                            TDCT
            Mian N. Riaz is the Director of the Food Protein R&D Center and Head of the Extrusion Technology Program at Texas A&M University, USA. G
                                                                                                                            TGB
            Prof. Efrén M. Benavides is a lecturer at the School of Aeronautics (Universidad Politécnica de Madrid) in mechanical design, reciprocating
                                                                                                                            TGXW
            Professor Klas Weman currently works for WEMAB AB in Sweden. He has previously worked for ESAB Welding Equipment AB and in the W
                                                                                                                            TDCP
            Hong Hocheng is a University Chair Professor in the Department of Power Mechanical Engineering at the National Tsing Hua University, Ta
            Prof. (Dr.) Sadhan Chandra Ray is working as Professor in Fabric Manufacture at Institute of Jute Technology,TDH Kolkata.
                                                                                                                            TDH
            B. Purushothama, in his service of 40 years in the textile and garment industry, has worked in various capacities in Spinning, Maintenance,
                                                                                                                            TDPH
            V. Ramesh Babu is a Senior lecturer at Department of Apparel and Fashion Technology, Sona College of Technology. He holds a postgradua
                                                                                                                            TDCT
            John Holah is Head of Food Hygiene at Campden BRI, UK. Huub Lelieveld was President of the European Federation of Food Science and Tec
            Dr Matthew Clark is a lecturer in the Department of Colour Science at the University of Leeds.                  TDH
            Dr Matthew Clark is a lecturer in the Department of Colour Science at the University of Leeds.                  TDH
                                                                                                                            TGB
            Clifford Matthews CEng, FIMechE is Director of Matthews Engineering Training Limited, UK, which runs training courses in API 510/570/653
                                                                                                                            TG
            The Institution of Mechanical Engineers (IMechE) is one of the leading professional engineering institutions in the world.
                                                                                                                            TGB
            J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                                                                                                                            TDCP
            Pedro P. Camanho is a Professor in the Department of Mechanical Engineering at The University of Porto, Portugal.Liyong Tong is a Professo
                                                                                                                            TDCK
            Dieter Landolt and Stefano Mischler are Professor Emeritus and Senior Scientist, respectively, at the Swiss Federal Institute of Technology L
                                                                                                                            TJFD
            Gertjan Koster is Associate Professor and Guus Rijnders is Chairman of Inorganic Materials Science at the University of Twente, The Nether
            Dr. Pedro A. Capó-Lugo works as an Aerospace Engineer in the guidance, navigation, and control analysis andTGB   design group at NASA George
                                                                                                                            TGB
            Giuseppe Russo is a recently retired Aerospace Engineer. Since 1984 he has been Associate Professor of Experimental Aerodynamics at the
                                                                                                                            TDCT
            Duncan Manley is an internationally-renowned consultant to the biscuit and food industries, with over 40 years’ experience. He is the auth
                                                                                                                            THF
            Professor John E. Oakey is Head of the Energy Technology Centre at Cranfield University, UK, and is renowned for his work on advanced ma
                                                                                                                            TNC
            Philippe Boisse is Professor at Institut National des Sciences Appliquées (INSA) Lyon France. He is the President of the European Association
                                                                                                                            THF
            Dr M. Rashid Khan is the leader of Corporate Intellectual Assets Management in the Technology Management Division at Saudi Aramco, Sa
                                                                                                                            TGMT
             V. S. Raja is Professor at the Department of Metallurgical Engineering and Materials Science at the Indian Institute of Technology Bombay, I
                                                                                                                            TDCT
            Elhadi Yahia is a Professor in the Faculty of Natural Sciences at the Autonomous University of Querétaro, Mexico, and is a consultant to sev
                                                                                                                            TGB
            Dr Jianfeng Yu is Director of Technical Development at the Jiangsu Inspection and Quarantine Mechanical and Electrical Products Testing Ce
                                                                                                                            TDCP
            Tony McNally is a Faculty Member in the School of Mechanical and Aerospace Engineering at Queen’s University Belfast, UK. He is a Fellow
                                                                                                                            TDCK
            Dr Abel Salam Hamdy Makhlouf, Max Planck Institute of Colloids and Interfaces, Germany. Ion Tiginyanu is Professor of Electronic Engineeri
            Hugh Gong is a Reader in Yarn and Nonwovens Technology at the School of Materials, University of Manchester.    TDH
                                                                                                                            Glynd?r
            Glyn O. Phillips is Chairman of Phillips Hydrocolloids Research Ltd, UK and Peter A. Williams is a Professor at TDCT University, UK. Both e
                                                                                                                            TGB
            The Institution of Mechanical Engineers (IMechE) is one of the leading professional engineering institutions in the world.
            Choong-Un Kim is Professor of Materials Science and Engineering at the University of Texas at Arlington, USA.   TJFD
                                                                                                                            THX
            Professor Angelo Basile is a senior researcher at the Institute on Membrane Technology (ITM) of the Italian National Research Council (CNR

                                                                                                                          TDCT
           Dr Yves Nys is a Research Leader in the Poultry Research Unit at the Institut National de la Recherche Agronomique, France. Dr Maureen Ba
                                                                                                                          TDCT
           Prof. Filip Van Immerseel leads a research group in the Department of Pathology, Bacteriology and Poultry Diseases at the Ghent University
           Dr Volkmar T. Bartels is the founder and managing director of Bartels Scientific Consulting GmbH.              MBG
                                                                                                                          chronic
e omega-6/omega-3 balance in health and disease: Evolutionary aspects of diet; The omega-6/omega-3 fatty acid ratio in TDCT diseases: Animal mod
                                                                                                                           Centre,
           Sheila C. Vir is currently a senior nutrition consultant and Director, Public Health Nutrition and DevelopmentTDCT New Delhi. She is a po
           Heimo O. Ylänen is Professor of biomaterials science at Tampere University of Technology, Finland.             TGM
                                                                                                                          TGXW
           Professor Brad. L. Kinsey is Associate Professor in the Mechanical Engineering Department at the University of New Hampshire, USA. Profes
                                                                                                                          TDH
           Brian J. McCarthy is the managing director at TechniTex Faraday Limited in Manchester, UK. He is well-known for his research work into tec
                                                                                                                          TDCP
           Dr. Mark T. DeMeuse worked for Celgard LLC, USA and is now an independent consultant. He is widely regarded for his research and work
           Zexian Cao is a Professor at the Institute of Physics of the Chinese Academy of Sciences in Beijing, China.    TJFD5
           Jinlian Hu is a Professor at the Institute of Textiles and Clothing, The Hong Kong Polytechnic University.     TDH
                                                                                                                          TDCT
           David Benton is a Professor in the Department of Psychology, Swansea University, UK. He is widely renowned for his research into the effe
                                                                                                                          TGM
           Rumin Wang is Professor, Shuirong Zheng and Yaping Zheng are Vice-Professors in the School of Science at Northwestern Polytechnic Univ
                                                                                                                          TDCT
           Dr. Joseph P. Kerry is head of the Food Packaging Research Group at University College Cork, Ireland. He is renowned for his research expert
                                                                                                                          TGB
           Dr. Cong Lu is currently an associate Professor in the School of Mechatronics Engineering, University of Electronic Science and Technology o
                                                                                                                          TDCT
           Elhadi Yahia is a Professor in the Faculty of Natural Sciences at the Autonomous University of Querétaro, Mexico, and is a consultant to sev
                                                                                                                          TDCT
           Elhadi Yahia is a Professor in the Faculty of Natural Sciences at the Autonomous University of Querétaro, Mexico, and is a consultant to sev
                                                                                                                            TDM
              Gillo Giuliano works in the Department of Mechanics, Structures and Environment at the University of Cassino, Italy. Professor Giuliano is i
                                                                                                                            TQD
              Dr. Marion I. Tobler-Rohr served as a senior researcher at ETH Zurich, Switzerland from 1996 to 2007 and owns her own sustainable develo
                                                                                                                            TDCT
              Elhadi Yahia is a Professor in the Faculty of Natural Sciences at the Autonomous University of Querétaro, Mexico, and is a consultant to sev
                                                                                                                            TDCT
              Dr. Kshirod R Bhattacharya worked in the Central Food Technological Research Institute, Mysore, India. Currently he is Advisor to Tilda Ric
              David Farrar is Science Manager for Biomaterials at the Smith and Nephew Research Centre, York, UK            MBG
                                                                                                                            MBG
              Dr. Lucy A. Bosworth and Professor Sandra Downes both work in the Materials Science Centre at The University of Manchester, UK and are
                                                                                                                            TDH
              Ning Pan is a Professor of Fiber and Polymer Science at the Department of Biological and Agricultural Engineering, University of California a
              Dr Alexander Zhilyaev works at the Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, Spain. DrTDM A. Pshenichnyuk works at the
                                                                                                                            TDH
              Milan Meloun is Professor of Chemometrics at Department of Analytical Chemistry, Faculty of Chemical Technology, Technical University of
                                                                                                                            TGBN
              Dr Qianfan Xin (also known as Harry Xin) obtained his DSc degree from Washington University in St Louis, USA. He has been working at Nav
                                                                                                                            TGXW
              Pan Michaleris is an Associate Professor in the Department of Mechanical and Nuclear Engineering at the Pennsylvania State University, US
                                                                                                                            TJFD
              M. O. Alam is a Researcher and Christopher Bailey is a Professor in the School of Computing and Mathematical Sciences at the University o
                                                                                                                            TGM
              Professor Xiaobin Zhao is Director of the UK-China Research Academy of Bioactive Molecules and Materials (RABMM). Professor Jim Courtn
                                                                                                                            TNC
              The principal editors are Yan Li and Shuxia Ren. They have coordinated a team of authors who are leading experts involved in teaching the
                                                                                                                            TN
 Concrete; Building mortar; Wall and roof materials; Construction steel; Wood; Waterproof materials; Building plastic; Heat-insulating materials and sou
                                                                                                                             at the
              Professor Jose-Maria Lagarón is group leader and founder of the group Novel Materials and NanotechnologyTDCT Institute of Agrochemis
e powertrain; Engines/emissions; External and internal component flows; Underhood; Heat & A/C vehicle comfort.              TG
                                                                                                                            TDM
              Dr. Kiyoshi Yamauchi works in the Innovation of New Biomaterial Engineering Center at Tohoku University, Japan. Dr. Ichizo Ohkata works fo
                                                                                                                            TDCT
              Dr Maria Saarela is a Chief Research Scientist in Microbiology at the VTT Technical Research Centre of Finland and is widely regarded for he
                                                                                                                            THX
              Mr Robert Beith is Managing Director of Beith & Associates Limited, and is an experienced energy and environment consultant. He holds C
              Carl T. F. Ross is a Professor of Structural Dynamics at the University of Portsmouth.                        TTS
                                                                                                                            TDCP
              Stepan Lomov is a Professor in the Department of Metallurgy and Material Engineering at the Katholieke Universiteit Leuven, Belgium.
              Geoff Talbot is a freelance consultant specialising in all aspects of fats and oils in the food industry.     TDCT
                                                                                                                            Science
              Kenneth Macdonald is Professor in the Department of Mechanical and Structural Engineering and Materials TGXW at the University of Sta
                                                                                                                             Portugal.
              Raul Fangueiro is an Auxiliary Professor in the Department of Textile Engineering at the University of Minho,TNK
                                                                                                                            AKTX
              Dr Amanda Briggs-Goode is the Programme Leader for BA Textile Design at Nottingham Trent University. Dr Katherine Townsend is the Prog
                                                                                                                            TDCT
              Dr L. Jagan Mohan Rao is currently working as Senior Scientist at Plantation Products, Spices and Flavour Technology Department of Centra
                                                                                                                            TDH
              B. Purushothama, in his service of 40 years in the textile and garment industry, has worked in various capacities in Spinning, Maintenance,
                                                                                                                            TDCT
              David Kilcast is a consultant in food and beverage sensory quality and is well-known for his research expertise in sensory evaluation method
                                                                                                                             Physics,
              Xianggang Qiu is a Professor and Group Leader at the National Laboratory for Superconductivity, Institute ofTJFD5 Chinese Academy of S
                                                                                                                            MMDS
              Professor Joel Ferri is Professor and Head of the Department of Oral and Maxillofacial Surgery at the Roger Salengro Hospital in France. He
                                                                                                                            TDCP
              Tony McNally is a Faculty Member in the School of Mechanical and Aerospace Engineering at Queen’s University Belfast, UK. He is a Fellow
                                                                                                                            TDM
              Guang-Ling Song is currently a Research Scientist working for General Motors Global Research and Development, USA. He is also an Adjunc
              Sung H. Whang is Professor of Mechanical Engineering at the Polytechnic Institute of New York University. TDM
                                                                                                                            TDCT
              Jeffrey Hoorfar is a Professor and Research Manager at the Technical University of Denmark. Kieran Jordan works at the Teagasc Food Resea
                                                                                                                            THK
              Professor Kenneth L. Nash of Washington State University and Dr Gregg J. Lumetta of Pacific Northwest National Laboratory are both note

                                                                                                                               TDP
             Dr. Nikolaos E. Zafeiropoulos is Assistant Professor in the Department of Materials Science and Engineering at the University of Ioannina in
                                                                                                                               TJFD
             Yasuhiro Shiraki is X at Tokyo City University, Japan. Noritaka Usami is an Associate Professor at the Institute for Materials Research, Tohoku
             Steve Rimmer is a Senior Lecturer in the Department of Chemistry at Sheffield University.                         TGM
                                                                                                                               PBW
             Dr Ali Muhammad currently works at Yanbu University College, Saudi Arabia. He has previously held leading software development roles in
                                                                                                                               THF
             Dr Ligang Zheng is a Research Scientist at CanmetENERGY, Natural Resources Canada. He is noted for his research in energy system technic
                                                                                                                               TDPH
             Dr Kin-Fan Au is an Associate Professor at The Hong Kong Polytechnic University. He is a Fellow of The Textile Institute, a senior member of
                                                                                                                               TDCT         F
             David Kilcast is Business Head of the sensory and consumer science group at Leatherhead Food International, Surrey, UK. 
iona Angus is Sci
                                                                                                                               TDCT
t bone in low- and high-income countries; Human milk vs. Cow’s milk and the evolution of infant formulas; Whole cow’s milk in early life; Biological effe
                                                                                                                               TDCT
             Professor Sarah De Saeger is based in the Faculty of Pharmaceutical Sciences at Ghent University, Belgium. Her current research interests i
                                                                                                                               TGBF
             J. Paulo Davim received his PhD in Mechanical Engineering from the University of Porto in 1997 and the Aggregation from the University of
                                                                                                                               THK
             Dr Michael I. Ojovan is an Assistant Professor in Materials Science and Waste Immobilisation at the University of Sheffield, UK, a Fellow of t
             Brent Vernon is Associate Professor of Bioengineering at Arizona State University, USA.                           TGM
                                                                                                                               TDPH
             Dr Guowen Song lectures in human ecology at the University of Alberta, Canada. His research concentrates on the protection and comfort
                                                                                                                               TDCK
             Dr Huibin Xu is a Professor and Dr Hongbo Guo is an Associate Professor in the School of Material Science and Engineering at Beihang Univ
                                                                                                           D                   TDCK
             Professor Wei Sha is Professor of Materials Science at Queen’s University Belfast in the UK. 
 r. Xiaomin Wu works for the Materials innovati
             Kieran C Molloy is Professor of Inorganic Chemistry at the University of Bath.                                PNF
                                                                                                                           TNK
             Professor Vistasp M. Karbhari is the Provost and Executive Vice-President for Academic Affairs at the University of Alabama in Huntsville, US
                                                                                                                           THX
             Professor John Dalsgaard Sørensen is Head of Wind Energy Systems and Technologies (WEST) at Aalborg University (AAU), Denmark, and is
             Dr. Michael Lysaght was the Founder and Director Emeritus of Brown University, USA’s Center for Biomedical TCBEngineering, and a retired mem
                                                                                                                           TGB
             Professor Yvan Baudoin is Head of the Department of Mechanics at the Royal Military Academy, Belgium. Professor Baudoin is also Chair of
                                                                                                                           KNAC
             Robin Dand is Product Manager at NYSE Liffe. He has previously worked for Gill & Dufus Limited, Holco Trading Company and as Shipping M
                                                                                                                           TDCT
             Christophe Lacroix is Full Professor for Food Biotechnology at the Institute of Food Nutrition and Health, ETH Zurich, Switzerland. He is wel

                                                                                                                              TDH
             Abhijit Majumdar is an Assistant Professor at the Indian Institute of Technology, Delhi. His research focuses on yarn and fabric production,
                                                                                                                              TGM
             Dr Rui Miranda Guedes works within the Faculty of Engineering at the University of Porto, Portugal. Dr Guedes has an international reputa
                                                                                                                              TGM
             Dr. Rachel Williams is a reader in clinical engineering at the University of Liverpool, UK. She is well regarded for her biomaterials research p
             Dr Rafael Luque is a Ramon y Cajal Fellow, and Professor Juan Manuel Campelo is Head of the Department ofTHX      Organic Chemistry, at the Uni
                                                                                                                              TDM
             Dr Roger Lumley is Principal Research Scientist at CSIRO's Light Metals Flagship in Melbourne, Australia. He has internationally-recognised
                                                                                               P                              TDCT
             Stanley Brul is Professor of Molecular Biology at the University of Amsterdam. 
ina Fratamico is a Research Microbiologist at the US Depart
                                                                                                                              TGXW
             Dr B. Mazumder is an Emeritus Scientist, Council of Scientific & Industrial Research, at IMMT research laboratory, Bhubaneswar, Orissa. He
             Dr Sie Chin Tjong is Professor of Physics and Materials at the City University of Hong Kong. Dr Yu-Wing Mai is TBNProfessor of Mechanical Engin
                                                                                                                              TGM
             Professor Terence Gourlay and Dr. Richard Black are both faculty members of the Department of Bioengineering at the University of Strath
                                                                                                                              TTB
             Professor Baojun Li works in the State Key Laboratory of Optoelectronic Materials and Technologies in the School of Physics and Engineerin
                                                                                                                              TGXW
             Dr Liming Liu is a Professor in the School of Materials Science and Engineering at Dalian University of Technology, China.
                                                                                                                              TDCT
             Christopher Doona is a Senior Research Chemist at the US Army Natick Soldier RD&E Center, Warfighter Science, Technology & Applied Rese
                                                                                                                              TDCT
             Syed Rizvi is Professor of Food Process Engineering and International Professor of Food Science at the Institute of Food Science, Cornell Un

                                                                                                                             THK
             Dr Philip G. Tipping, is a Nuclear Energy and Materials Consultant, and was formerly a Senior Materials Specialist/Metallurgist at the Swiss
                                                                                                                             TGXW
             Clifford Matthews CEng, FIMechE is Director of Matthews Engineering Training Limited, UK, which runs training courses in API 510/570/653
                                                                                                                             PB
             Colin McGregor is an Honorary Research Fellow in the Department of Mathematics, University of Glasgow, UK, where Jonathan Nimmo is a
                                                                                                                             TDCT
             Dr Ulf Sonesson, Dr Johanna Berlin and Dr Friederike Ziegler are all researchers in sustainable food production at SIK - the Swedish Institute
                                                                                                                             TDCT2
             Dr. Andrew G. Reynolds is Professor of Viticulture at the Cool Climate Oenology and Viticulture Institute, Brock University, Canada. His care
                                                                                                                             TGBF
             Homer Rahnejat is Professor of Dynamics at the Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University,
                                                                                                                             TDH
             Carl Lawrence is a Professor of Textile Engineering at the University of Leeds. He has 12 years industrial experience, in materials research. T
                                                                                                                             TJFD
             Professor Kenji Uchino is Director of the International Center for Actuators and Transducers, and Professor of Electrical Engineering, at The
                                                                                                                             TNK
             Goeran Pohl is Professor at the School of Architecture, University of Applied Sciences Saarland and Guest Professor at the International Ma
                                                                                                                             TDCT
             Eric Decker and Julian McClements are Professors in the Department of Food Science at the University of Massachusetts, Amherst, where E
                                                                                                                             TGM
             Dr Zhigang Zak Fang is a Professor in the Powder Metallurgy Research Laboratory of the Faculty of Metallurgical Engineering at the Univers
                                                                                                                              has
             Dr Gordana Colovic is a professor at The College of Textile Design, Technology and Management, Serbia. SheTDH authored 3 books and sev
                                                                                                                             TDCT
             Eric Decker and Julian McClements are Professors in the Department of Food Science at the University of Massachusetts, Amherst, where E
                                                                                                                             KNGV1
             Alexandre Bradley BEng (Hons), CEng, MIMechE, MPhil/PhD in study, has previously been an employee of BAA (formerly British Airport Au
                                                                                                                             TDH
             Dr Vincent Nierstrasz is Senior Scientist at the Department of Textiles at Ghent University. His research focuses on biotechnological surface m
                                                                                                                             THK
tructures during creep; Dislocation motion at elevated temperatures; Recovery - creep theories of pure metals; Creep of solid solution alloys; Creep of se
                                                                                                                             TDCJ
             Dr M L Gulrajani is a Professor at the Indian Institute of Technology in Delhi. He has undertaken more than 50 consultancy projects from va
                                                                                                                              at the
             Dr César Sequeira and Dr Diogo Santos both work in the Department of Chemical and Biological EngineeringTJFD prestigious Instituto Su
                                                                                                                              and
             Dr Sara Jaeger is the leader of the sensory and consumer science team at the New Zealand Institute for PlantTDCTFood Research. She is exp
             Tse-Chao Hua and Bao-Lin Liu have studied in both China and the USA and are currently faculty members at TDCT   Shanghai University of Science
                                                                                                                             THK
             Professor Joonhong Ahn is a Professor of Nuclear Engineering at the University of California, Berkeley, USA.Dr Michael J. Apted is a Principa

                                                                                                                             THX
             Professor John K. Kaldellis is Head of the Soft Energy Applications & Environmental Protection Laboratory (SEALAB) at the Technological Ed
                                                                                                                             TGMD5
             Dr Anastasios P. Vassilopoulos is a Research and Teaching Associate in the Composite Construction Laboratory (CCLab) at the Ecole Polytec
                                                                                                                             TTBL
             Dr Jonathan Lawrence is a Senior Lecturer in the Wolfson School of Mechanical and Manufacturing Engineering at Loughborough University
             Dr Christiane Maierhofer is an expert in NDT at the BAM Federal Institute for Materials Research and Testing,TNK Germany. Hans-Wolf Reinhard
                                                                                                                             TDCT2
             Dr Christian Butzke is Enology Professor in the Department of Food Science, Purdue University, USA. An award-winning former commercial
                                                                                                                             in the
             Dr Xin Sun is a staff scientist at the Pacific Northwest National Laboratory in the United States. Dr Sun works TGXW Computational Sciences
                                                                                                                             MBG
             Professor Subhash Anand MBE is Professor of Technical Textiles at the University of Bolton, UK. He has published over 200 textile research
             Professor M. Mercedes Maroto-Valer is Director of the Centre for Innovation in Carbon Capture and StorageTHF    (CICCS), University of Nottingh
                                                                                                                                  TGM
               Dr. Chandra P. Sharma is Senior Scientist and Head of Biosurface Technology Division, Associate Head of Biomedical Technology Wing and
                                                                                                                                   Delhi,
               Dr Alagirusamy is Professor in the Department of Textile Technology, Indian Institute of Technology (IIT), NewTDH India. His main research
               Professor M M Maroto-Valer is Director of the Centre for Innovation in Carbon Capture and Storage (CICCS), THF     University of Nottingham, UK,
                                                                                                                                  TDH
               Roger Chapman is a Technical Consultant based in Warwickshire. His background is in innovation in fibres and fabrics, especially for technic
               Dr Christiane Maierhofer is an expert in NDT at the BAM Federal Institute for Materials Research and Testing,TNK    Germany. Hans-Wolf Reinhard
                                                                                                                                  TDCT
               William W. Christie, Scottish Crop Research Institute and Mylnefield Research Services,Scotland.Xianlin Han, Washington University School o
                                                                                                                                  THX
               Professor Keith W. Waldron is a Senior Scientist at the internationally renowned Institute of Food Research, UK where he is head of the “Su
                                                                                                                                  THF
               Dermot Roddy is the Science City Professor of Energy and Director of the Sir Joseph Swan Institute at Newcastle University, UK. He was pre
                                                                                                                                  TGM
               Dr Ma?gorzata Sopicka-Lizer is a lecturer at the Faculty of Materials Engineering and Metallurgy, Silesian University of Technology (Politech
               Dr David Kilcast, formerly of Leatherhead Food Research, is a consultant in food and beverage sensory quality.     TDCT
                                                                                                                                  TDCK
               Dr Hanshan Dong is a Reader in surface engineering in the School of Metallurgy and Materials at the University of Birmingham, UK
                                                                                                                                  TDCT
               A Research Fellow at CSIRO Food and Nutritional Sciences, Colin W. Wrigley has received international recognition for his 48 years in cereal
                                                                                                                                  TDH
               Neeraj Nijhawan is an industrial engineer with extensive hands-on, meticulous, bottom line-oriented experience of over 17 years in manag
                                                                                                                                  TDPF
               Dr Subrata Das is Scientist “D”, Central Silk Technological Research Institute, Central Silk Board, India. To date, he has published hundreds o
                                                                                                                                  TDH
               B. Purushothama is a Lead Auditor in ISO 9000 since 1994 and a certified Quality Analyst from Tata Quality Management Services. Being in
 n studies and diet; Copy number variation, eicosapentaenoic acid and neurological disorders. With particular reference toTDCT     huntington's disease and asso
                                                                                                                                  TDCT2
               Dr. Andrew G. Reynolds is Professor of Viticulture at the Cool Climate Oenology and Viticulture Institute, Brock University, Canada. His care
                                                                                                                                  TDCT
               Leif Skibsted is a Professor in the Department of Food Science at the University of Copenhagen, Denmark, where Jens Risbo and Mogens A
                                                                                                                                  TNK
               Dr Matthew R Hall is a Lecturer in civil engineering materials at the University of Nottingham, UK. He is an award winning researcher, noted
                                                                                                                                  TDCT
               Mansel Griffiths is Professor of Food Science at the University of Guelph, Canada and Director of the Canadian Research Institute for Food
                                                                                                                                  TGPR
               W Wong CEng, MSaRS, FIMechE, FIMarEST is an engineer and author with a wide experience in industry up to senior management level. Si
                                                                                                                                  TDCT
               Mansel Griffiths is Professor of Food Science at the University of Guelph, Canada and Director of the Canadian Research Institute for Food
                                                                                                                                  TGM
               Dr Niinomi is Professor of Department of Biomaterials Science, Institute for Materials Research, Tohoku University, Japan. Dr Niinomi is hig
                                                                                                                                  TDCP
               David A. Dillard is the Adhesive and Sealant Science Professor at Virginia Polytechnic Institute and State University, USA and is known for h
                                                                                                                                  TGM
               Dr Nasim Uddin is an Associate Professor of Civil Engineering in the School of Engineering at the University of Alabama at Birmingham.
                                                                                                                                  TGMD4
               Dr Xu Wang is a Senior Lecturer in the School of Aerospace, Mechanical and Manufacturing Engineering at the Royal Melbourne Institute o
                                                                                                                                  TNKF
               Dr. Stec and Prof. Hull have worked together on fire toxicity for the last 6 years, currently in the Centre for Fire and Hazard Science at Unive
                                                                                                                                  TDH
               Dr B. K. Behera is a professor in the Department of Textile Technology at the Indian Institute of Technology, Delhi. His research interests incl
                                                                                                                                  TGM
               Dr P K Mallick is the William E Stirton Professor in the Department of Mechanical Engineering and the director of Interdisciplinary Program
               R. S. Tomar is Deputy General Manager (Quality Assurance) with Raymond Ltd, India.                                 TDH
                                                                                                                                  THX
               Jan C J Bart is a Full Professor of Industrial Chemistry and Stefano Cavallaro is an Associated Professor of Industrial Chemistry at the Univer
                                                                                                                                  TGM
               Dr Peter Rhys Lewis is a Senior Lecturer in materials engineering at the Open University. Colin Gagg is a Project Officer in materials enginee
                                                                                                                                  and
of obesity and related conditions; Leptin, nutrition, and the programming of hypothalamic feeding circuits; Early gGrowthTDCTageing; Does early growth
                                                                                                                                  TDCT
n as a driver of infant formula development; The clinical challenge of preventing and treating malnutrition; Progress of enteral feeding practice over tim
                                                                                                                                   Delhi.
               Dr R. Alagirusamy is Professor in the Department of Textile Technology at Indian Institute of Technology, NewTDH He has completed his P
               William C. (Bill) Smith, President and founder, began the consulting firm Industrial Textile Associates in 1986TDCKto assist companies to enter a
               Carlos Mena is a Senior Research Fellow at the Centre for Logistics and Supply Chain Management, Cranfield KNDF    University School of Managem
                                                                                                                                  TGM
               Dr. Charles Archer is Professor of Reparative biology and tissue engineering at Cardiff University, UK. Dr. Jim Ralphs also works at Cardiff Un
                                                                                                                                  TDCT
al control of eating; Therapeutic potential of gut peptides; Roles of amylin in satiation; Adiposity and brain development; The enterocyte as an energy flo
                                                                                                                                  TGXW
               Daniela Lohwasser is a friction stir welding specialist with AIRBUS, Germany. Zhan W Chen is an Associate Professor in the School of Enginee
                                                                                                                                  TGM
               Professor Traian Chirila is a senior scientist at the Queensland Eye Institute, Australia. Professor Chirila has over thirty years experience in p
                                                                                                                                  RNH
               Dr Vannessa Goodship is a Principal Research Fellow in the International Automotive Research Centre, WMG, at The University of Warwick
                                                                                                                                  TRC
               Professor Hua Zhao leads a large research group on IC engines and their fuels at Brunel University West London. He has over 20 years’ rese
                                                                                                                                  TDCT
               Janice Albert is a Nutrition Officer in the Nutrition and Consumer Protection Division of the Food and Agriculture Organization of the Unite
                                                                                                                                  TGM
               Andrew Lewis is Research & Technology Director for Biocompatibles UK Ltd and Visiting Professor of Biomaterials & Drug Delivery at the Un
                                                                                                                                  TDCT
  omega–3 essential fatty acids in modern diets; Serial structural mri analysis and proton and 31pmr spectroscopy in the investigation of cerebral fatty ac
                                                                                                                                  TDH
               Dr Xiaogang Chen obtained his PhD in Textile Engineering from the University of Leeds in 1991. He is currently a reader in technical textiles
                                                                                                                                  TDH
               Dr J. N. Chakraborty is Professor and Present Head of Textile Technology Department at the National Institute of Technology, Jalandhar, In
                                                                                                                                  TGM
, mechanical equipment and machinery, vehicles, etc.) and in the last decades their importance is increasing together with their variety. Papers include:
                                                                                                                                  TGM
               Professor Luigi Ambrosio is Director of the Institute for Composite and Biomedical Materials, and Adjunct Professor of Biomaterials at Univ
                                                                                                                                  TDCT
               Professor Keith W Waldron is a Senior Scientist at the internationally renowned Institute of Food Research, UK where he is head of the “Su
                                                                                         D                                        TDM
               Wei Sha is Professor of Materials Science at Queen’s University Belfast 
 r Zhanli Guo is a Senior Materials Scientist at Sente Software, UK
              Dr Norbert Delatte is Professor of Civil Engineering at Cleveland State University, Ohio, USA.                   TNC
                                                                                                                               TDCT
              Milena Corredig is Professor in the Department of Food Science at the University of Guelph, Canada. She holds the Ontario Dairy Council/N
                                                                                                                               TRC
              Professor Hua Zhao leads a large research group on IC engines and their fuels at Brunel University West London. He has over 20 years’ rese
                                                                                                                               TGM
              Sergei Petrushkin and Vitaly Samartsev are internationally-known for their research in the field of laser cooling of solids.
                                                                                                                               TDH
              Dr Stephen Eichhorn is Senior Lecturer in Polymer Physics and Biomaterials in the Materials Science Centre at the University of Mancheste
                                                                                                                               TDM
 Materials and weldability; Welding processes; Non-destructive testing and mechanical testing; Welding defects and acceptance; Fracture modes; Codes,
                                                                                                                               TDH
              Dr Stephen Eichhorn is Senior Lecturer in Polymer Physics and Biomaterials in the Materials Science Centre at the University of Mancheste
              Dr Richard Blackburn is a Senior Lecturer in the School of Design at the University of Leeds, UK. Dr BlackburnTQD is well-known for his research
                                                                                                                               TDH
              Dr Anthony Bunsell is Research Professor responsible for studies in the fields of fibre reinforcements and fibre composites at the Materials
              Frank Fahy University of Southampton, UK                                                                         TQK
                                                                                                                               PNF
 ionibus…; The master of heaven; Circles or ellipses? Galileo – the experimenter; Telescopes and the sky; The storm gathers; The Dialogue; Confrontation
                                                                                                                               PNF
 ionibus…; The master of heaven; Circles or ellipses? Galileo – the experimenter; Telescopes and the sky; The storm gathers; The Dialogue; Confrontation
                                                                                                                               TDPH
              Dr John Williams is a Senior Lecturer in the Textiles Engineering and Materials (TEAM) group, De Montfort University, UK. He has published
                                                                                                                               TGMT
              Dr Emile S Greenhalgh is a Senior Lecturer in Aeronautics at Imperial College London, where he lectures on material selection, composite d
                                                                                                                               TBC
              Dr Roger Lewis is a Senior Lecturer in the Department of Mechanical Engineering, University of Sheffield, where his main research interests
                                                                                                                               TDPF
              Trevor Rowe is a Senior Lecturer in the School of the Built Environment and Engineering at the University of Bolton, UK.
                                                                                                                               TGB
 food supply in the European Union; Food availability at the household level in the European Union; Food consumption in adults on the basis of dietary s
                                                                                                                               TDCT
              Pina Fratamico and Bassam Annous are microbiologists in the Microbial Food Safety Research and Food Safety Intervention Technologies Re
                                                                                                                               TGMT
              Dr Richard A. Behr P.E. is the Charles and Elinor Matts Professor of Architectural Engineering in the Department of Architectural Engineerin
                                                                                                                               TDH
              Dr Subrata Das is Scientist “D”, Central Silk Technological Research Institute, Central Silk Board, India. To date, he has published hundreds o
                                                                                                                               TDH
              B. Purushothama, in his service of 40 years in the textile and garment industry, has worked in various capacities in Spinning, Maintenance,
                                                                                                                               TDCT
              Philip Ashurst has been involved in the beverage, brewing, flavour and extract industries in both technical and general management roles fo
                                                                                                                               TDCK
              Dr Qufu Wei is Professor of Textiles Science and Engineering at Jiangnan University in China. He is the recipient of the 2006 Award for New
              Professor Josep A. Planell and Professor Damien Lacroix are highly regarded for their biomedical research at MBG Universitat Politècnica de Cata
                                                                                                                               TDCT
              Stanley Cauvain and Linda Young are Directors of BakeTran, a provider of knowledge and solutions for the baking industry. Now Vice-Presid
se; The hygiene hypothesis: Do we still believe in it? ‘ABC’ of mucosal immunology; Innate and adaptive immune pathwaysTDCT     to tolerance; Hitting the muco
              Professor Vistasp M. Karbhari is Provost and Executive Vice-President of Academic Affairs at The University ofTNC Alabama in Huntsville, USA w
                                                                                                                               TBC
              Dr Mark Robinson is Professor of Rail Systems Engineering in the School of Mechanical and Systems Engineering at Newcastle University, UK
                                                                                                                               of fatty
asuring blood fatty acids as a surrogate indicator for coronary heart disease risk in population studies; Fast determination TDCT acids in whole blood c
                                                                                                                               TDCT
              David Julian McClements and Eric Andrew Decker are Professors in the Department of Food Science at the University of Massachusetts. Th

                                                                                                                             THX
              Kevin Huang is a Fellow Engineer at Siemens Energy, Inc., USA. Dr John B. Goodenough holds the Virginia H. Cockrell Centennial Chair in En
                                                                                                                             TDCT
              Gavin Burnell is Professor at University College Cork, Ireland, and Editor-in-Chief of Aquaculture International. Geoff Allan is Research Leade
                                                                                                                             TGM
              Matthew Lorence and Peter Pesheck, of General Mills, each have over 25 years of experience working on microwave products focused on i
                                                                                                                             TDCP
              Professor Shao-Yun Fu is Division Head, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China. Dr Bernd
                                                                                                                             TDCT
              Clive Blackburn and Peter McClure both work in the Safety and Environmental Assurance Centre (SEAC), Unilever Colworth, UK. They have
                                                                                                                             TDCT
cept the ingredient; Factor 3 Understand the health benefit; Factor 4 Trust the brand. Part 2 Case studies – the Four factors applied.
              Professor Flemming Ove Olsen works in the Department of Manufacturing Engineering and Management at TGXW       the Technical University of Den
                                                                                                                             TDCT
              Formerly Senior Applications and Technical Service Manager for Loders Croklaan, Geoff Talbot is now a freelance consultant. He is widely in

                                                                                                                                years,
              Dr Peter Fellows is a senior consultant in food processing, working mostly in Africa and Asia. Over the last 30TDCT he has worked extensiv
                                                                                                                               TDCP
              Dr John Provis is a Senior Research Fellow at the University of Melbourne, Australia. Professor Jannie van Deventer is Professor of Mineral a
                                                                                                                               TGMT
              John Lancaster is the respected author of Engineering Catastrophes, now in its third edition. In his working life he was concerned as a meta
                                                                                                                               TDCT
              Frédéric Destaillats, Nestlé, Switzerland Jean-Louis Sébédio, INRA, FranceFabiola Dionisi, Nestlé, SwitzerlandJean-Michel Chardigny, INRA, F
                                                                                                                               TDPH
              Professor Fan was awarded a PhD from the University of Leeds in 1989 and is now Professor at the prestigious Institute of Textiles and Cloth
              Dr S. Rajasekaran is Professor of Infrastructure Engineering at the PSG College of Technology, India.            TNC
                                                                                                                               TDCP
              Dr Sabu Thomas is Professor of Polymer Technology at the Mahatma Gandhi University, India, and is highly regarded for his research in the
                                                                                                                               TDCT
              Professors G O Phillips and P A Williams are internationally-recognised experts on hydrocolloids. They are founders of the international jou
                                                                                                                               Diego
              Dr Claire Hellio is Senior Lecturer in the School of Biological Sciences at the University of Portsmouth, UK. Dr TDCK M Yebra works for Pintu
                                                                                                                               TGM
              Clifford Matthews CEng, FIMechE is Director of Matthews Engineering Training Limited, UK, which runs training courses in API 510/570/653
                                                                                                                               MBG
              Dr Subbiyan Rajendran is a Senior Scientist and researcher at the University of Bolton, UK. He has an impressive international research and
              David Stirling, formerly, University of Reading, UK                                                              PB
               Michael Wilson is Professor of Microbiology at UCL Eastman Dental Institute, University College London and TDCT      Honorary Clinical Microbiologi
                                                                                                                                    TNC
               Dr Jamal Khatib is a Reader in Civil Engineering Materials in the School of Engineering and the Built Environment, University of Wolverham
                                                                                                                                    MBG
               Dr. John Denstedt is Professor of Urology at The University of Western Ontario, Canada and is highly regarded for his research in endourolo
                                                                                                                                    TDM
               Professor Wei Sha is Professor of Materials Science at The Queen’s University of Belfast, UK. Dr Savko Malinov is a Lecturer in Mechanical a
                                                                                                                                    is now
               Dr Brian W. Darvell DSc CChem CSci FRSC FIM FSS FADM, formerly University of Hong Kong, Hong Kong and TDC Professor in Dental Mat
                                                                                                                                    TQD
               Edward Maltby is Professor of Wetland Science, Water and Ecosystem Management and Director of the Institute for Sustainable Water, In
                                                                                                                                    TDCT
 sesame lignans on gene expression profiles and fatty acid oxidation in rat liver; Genome science of lipid metabolism and Obesity; Oxidative stress-induce
                                                                                                                                    TDH
               Dr Mohsen Miraftab is a Reader in Textiles at the University of Bolton, UK. He has interest in technical and medical textiles as well as textile
                                                                                                                                    PBW
s derivatives; Time-invariant linear systems; The Laplace Transform; Fourier Series and Fourier transforms; Other types of generalised functions; Introduc
                                                                                                                                    TDCT
               Professor Ian Shaw is Professor of Toxicology in the Department of Chemistry, University of Canterbury, New Zealand. He has published wi
                                                                                                                                    TDCT
               Dr Mingruo Guo is Professor in the Department of Food and Nutritional Sciences, University of Vermont, USA. He is highly regarded for his
                                                                                                                                    TDCT
               Dr Herb Meiselman, formerly a Senior Research Scientist at the US Army Natick Soldier Systems Center, has held Visiting Professorships at
                                                                                                                                    TDPF
               Professor (Dr) Kamal Kanti Goswami, C.Text, FTI is the Director of the Indian Institute of Carpet Technology (IICT), in India. He is inventor of
               Luca Susmel is an Associate Professor in Structural Integrity at the University of Ferrara, Italy.                   TNC
                                                                                                                                    TDCT
 dies – India; Regional case studies – China; Regional case studies – Africa; Obesity in emerging nations: Evolutionary origins and the impact of a rapid nu
                                                                                                                                    TDH
               Sharachchandra Yeshavant Nanal had been in the textile industry for more than 33 years. While in the industry, he developed a Point Ratin
                                                                                                                                    TDH
               J W Parchure, with more than 19 years of experience in Textile designing and 33 years in Commercial designing, is conversant with both. Be
                                                                                                                                    TDPH
               Jane McCann is Director of the Smart Clothes and Wearable Technologies (SCWT) Research Centre at University of Wales Newport, UK. Her
                                                                                                                                    TDH
               Max Houck is the Director of the Forensic Science Initiative and Director of Forensic Business Development at West Virginia University. He
                                                                                                                                    TDCT
               Professor Paul Paquin was Research Associate Dean of the Agriculture and Food Science Faculty, founder of the Nutraceuticals and Functio
                                                                                                                                    TDCT
               Dr Sandra E. Shumway is a Research Professor at the University of Connecticut, USA. She is Editor of the Journal of Shellfish Research and th
                                                                                                                                    TDH
               Samuel C O Ugbolue is a Professor of Polymer Science and Textile Technology with industrial and academic experiences in the UK and Nige
                                                                                                                                    MBG
               Dr Dennis P. Orgill is the Director of the Burn Center and leads the Wound Healing and Tissue Engineering at Brigham and Women’s Hospita
                                                                                                                                    TDCT
               Dr Joseph Kerry is a college lecturer at University College Cork and Head of the Food Packaging Research Group.Professor David Ledward is
               Samuel Benavides is a Senior Materials Engineer with the Aging Aircraft Branch of the US Coast Guard.                TDCK
                                                                                                                                     She
               Dr Lucy Di Silvio is a Senior Lecturer in Biomaterials and Biomimetics at the esteemed King's College London. TDM has over 20 years experie
                                                                                                                                    TDH
               Dr Nigel Johnson is Chief of the Division of Textile and Fibre Technology, at CSIRO, Australia. CSIRO is one of the world’s leading research cen
                                                                                                                                    TDCT
               Dr Monique Raats is Co-Director of the Food, Consumer Behaviour and Health Research Centre at the University of Surrey, UK. Professor W
                                                                                                                                    TGMT
               Dr Raman Singh is an Associate Professor in the Department of Chemical Engineering and Department of Mechanical and Aerospace Engine
                                                                                                                                    TDH
               Dr Yehia El Mogahzy is Professor of Polymer and Fiber Engineering at the College of Engineering, Auburn University, USA. To date, he has p
                                                                                                                                    TCB
               Professor Takayuki Yoneyama teaches at Nihon University School of Dentistry, Japan. He has studied the clinical applications of Ti-Ni and Ti
                                                                                                                                    TDCQ
               Professor Michael Gasik is Head of the Laboratory of Materials Processing and Powder Metallurgy at Helsinki University of Technology, Finl
                                                                                                                                    TGMT
               Dr Srinivasan Sridharan is Professor of Mechanical, Aerospace and Structural Engineering at Washington University of St Louis, USA. He has
                                                                                                                                    TNC
               J K Paik BE, ME, Dr Eng is Professor of Ship and Offshore Structural Mechanics at Pusan National University, Korea and Director of the Unive
                                                                                                                                    TDH
               Professor Roshan Shishoo was formerly Director of Research and Managing Director of the TEFO and IFP Research Institutes in Sweden. An
                                                                                                                                    MBG
               Dr Sanjukta Deb, of King's College London, is highly regarded for her expertise and ongoing research in the field of biomaterials, in particul
                                                                                                                                    TDC
               Dr Navin Chand is Head of the Polymer and Fiber Group at the Advanced Materials and Processes Research Institute, Bhopal, India (Former
                                                                                                                                    TDH
               J W S Hearle, M.A., Sc.D., Ph.D., C.Text F.T.I (Hon.), F.Inst.P, is Emeritus Professor of Textile Technology in the University of Manchester, UK.W
                                                                                                                                    TDH
               Professor Peter Schwartz is Head of the Polymer and Fiber Engineering Department at Auburn University, USA. He has published numerous
                                                                                                                                    He has
               Michael Ellison is a Professor in the School of Materials Science and Engineering at Clemson University, USA. TDH established a large inte
                                                                                                                                    TDCQ
               Dr Gavin Walker is a leading authority on hydrogen storage. He works at the University of Nottingham, is a partner in the UK Research Cou
                                                                                                                                    TDC
               Dr Fraser Buchanan is a Senior Lecturer in the School of Mechanical and Aerospace Engineering at Queens University Belfast. He is highly re
                                                                                                                                    TDCT
               Martyn Brown was formerly a Senior Microbiologist at Unilever Savoury Global Supply Chain and Technology Group, UK. Now a consultant
                                                                                                                                    KNGV
               Mike Hirst is a Senior Associate with Airport Planning and Development Ltd, Leeds, UK. He is a chartered engineer and aviation systems spe
                                                                                                                                    TDCT
               Professor Kwan-Hwa Park is Director of the Center for Agricultural Biomaterials and Professor in the Department of Food Science and Biote
                                                                                                                                    TGMT
               Richard Horrocks is currently Professor in Textile Science at the Centre for Materials Research and Innovation, University of Bolton. Professo
                                                                                                                                    TDH
               Jinlian Hu is a Professor at the Institute of Textiles and Clothing, Hong Kong Polytechnic University. A Fellow of the Textile Institute, she wa
                                                                                                                                    TDH
               Jinlian Hu is a Professor in the Institute of Textiles and Clothing at the Hong Kong Polytechnic University. A Fellow of the Textile Institute, sh

                                                                                                                           TGM
              Dr Rod Martin, Chief Executive Officer of MERL Ltd in Hitchin, UK, is a Chartered Engineer and Chartered Scientist. He has conducted resea
                                                                                                                           TDCT
              Professor Øyvind Lie, an internationally renowned expert on aquaculture nutrition and fish quality, is currently director of the National Ins
                                                                                                                           TCB
              Professor Rui L. Reis (Editor-in-Chief of the book), Dr Nuno M. Neves, Dr João F. Mano, Dr Manuela E. Gomes, Dr Alexandra P. Marques and
                                                                                                                                Omega-3 fatty acids, exercise,
 itive health; Historical perspective: The antiquity of exercise, exercise physiology and the exercise prescription for health; TDCT
                                                                                                                                TDCT
 eds; Factors influencing the establishment of the intestinal microbiota in infancy; Genetically determined variation in polyunsaturated fatty acid metabo
                                                                                                                                TDCT
                Geoff, now known as the Fat Consultant, is an internationally renowned specialist in confectionery fats and oils. He has been involved with
                                                                                                                                TDM
 ; Equilibrium in aqueous solutions; Thermodynamics of heterogeneous systems in aqueous media; Programs and databases for thermodynamic calculati
                                                                                                                                TDCT
                Professor Emo Chiellini holds the Chair in Fundamentals of Chemical Technology in the Faculty of Engineering at the University of Pisa and
                                                                                                                                TNC
                Professor Len C. Hollaway is Emeritus Professor of Composite Structures at the University of Surrey, UK. Professor Jin Guang Teng is Associa

                                                                                                                                TNC
                Professor A S Khanna works within the Department of Metallurgical Engineering and Materials Science at the prestigious Indian Institute o
                                                                                                                                MBG
                Dr Peter A. Revell is Emeritus Professor at University College London. Formerly Professor of Histopathology at the Royal Free and Universit
                                                                                                                                TDCT
                Professor Ji?í Klemeš holds an EC Marie Curie Chair at the University of Pannonia, Hungary. Professor Robin Smith is Director of, and Dr Jin
                                                                                                                                TDH
                Dr Kim Pickering is a Senior Lecturer in the Engineering Department at the University of Waikato, New Zealand. She is internationally-know
                                                                                                                                TDH
                Professor B L Deopura, Dr R Alagirusamy, Dr M Josh and Dr B Gupta all work within the Department of Textile Technology in the prestigiou
                                                                                                                                TDCT
                Professor Philip Richardson is Head of the Food Manufacturing Technologies Department at the internationally renowned Campden BRI, U
                                                                                                                                TNC
                Dr Sidney Mindess is Emeritus Professor of Civil Engineering at the University of British Columbia, Canada. He has an international reputati
                                                                                                                                TDH
                Dr Bhupender S Gupta is Professor of Textile Engineering, Chemistry and Science at North Carolina State University, USA. Professor Gupta i
                Frank D. Gunstone, Scottish Crop Research Institute, Dundee, Scotland                                           TDCT
                                                                                                                                TDCK
mensional analysis; Fiberisation process; Visualisation method in real production processes; Applying the visualisation method to measuring the thickness
                                                                                                                                TDCK
                Professor Dr-Ing Michael Schütze is Director of Karl-Winnacker-Institut der DECHEMA (The Society for Chemical Engineering and Biotechnol
                                                                                                                                TDH
                Professor Kristiina Oksman Niska works in the Division of Manufacturing and Design of Wood and Bionanocomposites, Luleå University of T
                                                                                                                                TDPH
                Dr Catherine Fairhurst is the Head of the Department of Clothing Design and Technology at Manchester Metropolitan University, UK. Dr Fa
                                                                                                                                TDH
                Dr Eugene Wilusz works in the world-famous US Army Natick Soldier Research, Development and Engineering Center in Natick, Massachus
                                                                                                                                TGXW
 fety legislation – how much is there? Enforcement and the legal situation; Health and safety – so what business are you in? HSAW act 1974 and what it
                                                                                                                                TDCT
                Professor Torger Børresen is Research Director of the Department of Seafood Research at the National Institute of Aquatic Resources, The
                                                                                                                                head
                Dr Sergio O. Serna-Saldivar is the world’s leading expert on the snacks sector. He is the professor and former TDCT of the Biotechnology and
                                                                                                                                TGM
                Dr Muammer Koç is Director of the NSFI/UCRC Center for Precision Forming and Associate Professor in the Department of Mechanical Engi
                                                                                                                                THF
                Eric Jeffs has written widely on a range of issues affecting the power industry, and from 1991 to 2005 was European Editor of Turbomachin
                                                                                                                                TVB
                Professor Francisco Tomás Barberán and Dr María Isabel Gil are both senior researchers in the Department of Food Science and Technolog
                                                                                                                                TGXW
                YiMing Zhang is James R Boyd Professor of Electrical Engineering at the University of Kentucky. Professor Zhang is internationally-known fo
                                                                                                                                TDCK
                Wei Gao is a Professor of Materials Science and Engineering and a Fellow of the Royal Society of New Zealand. He and his colleague Dr. Zhe
                Karoly Jarmai and Jozsef Farkas University of Miskolc, Hungary                                                  TNC
                Jozsef Farkas and Karoly Jarmai, University of Miskolc, Hungary                                                 TNC
                                                                                                                                TDH
                                                                                                                                TDCT
                Peter Berry Ottaway is a food scientist and technologist with over forty years experience in the food industry. He heads a consultancy spec
                                                                                                                                TBN
                Y (Norman) Zhou is the Canadian Research Council (CRC) Chair in Microjoining and Professor of mechanical and mechatronics engineering
                                                                                                                                TGM
ues; Pressure testing and commissioning; Pipeline operation; Pipeline maintenance; Pipeline condition monitoring and repair methods; Pipeline decomm
                                                                                                                                TDC
                Dr Richard Curtis is a senior lecturer at King's College London Dental Institute. He is the Superplasticity Committee Chair for the Institute of
                                                                                                                                TDCQ
                Tadashi Kokubo is a Professor at the College of Life and Health Sciences, Chubu University, Japan. He is a member of many academic institu
                Dr Stefan Winnik is a Materials and Corrosion Specialist with ExxonMobil chemical company in the UK.            TDCK
                                                                                                                                PNRH
                Zuo-Guang Ye is Professor of Chemistry at Simon Fraser University, Canada. He is recognized as a world leader in the growth and character
                                                                                                                                TDM
                Dr Fujio Abe is the Director of the Heat Resistant Design Group in the Steel Research Center at the National Institute for Materials Science (
                                                                                                                                TGM
                Peter Jones is a practising Consulting Engineer with over thirty five years experience within the plastics industry. He has wide experience of
                                                                                                                                TJF
                Dr. Victor Zalizniak was awarded his Masters in Physics at Krasnoyarsk State University, Russia before becoming a Research Fellow at the C
                                                                                                                                TVB
                S Grant Wyllie is a consultant scientist for ChromOil in Australia and Dr Bernhard Brückner is a senior researcher at the Institute of Vegetab
                                                                                                                                PNF
                Dr. Pierre Cornelis Thijssen studied chemistry at the Radboud University in the Netherlands, obtaining his Masters Degree in 1978. He then
                                                                                                                                TDCT
 bone development; The role of genes in growth and later health; Maternal nutrition before and during pregnancy; The diabetic pregnancy, macrosomia
                                                                                                                                TGM
                Dr Lietai Yang is a leading authority on corrosion monitoring. He works at the Southwest Research Institute in Texas, one of the major cent
                Dr E D Yardley C Eng, PhD, MIMMM, MIMechE is a retired Consultant Engineer, who has more than 30 years' TTU      experience of development, te
                                                                                                                                TDM
                Dr Klaus Hack is Managing Director of GTT Technologies (Gesellschaft für Technische Thermochemie und–physik mbH), one of the member
                                                                                                                                TDCT
                Nissim Garti is Professor of Chemistry and head of the Casali Institute of Applied Chemistry at The Hebrew University of Jerusalem. Profess
                                                                                                                                PBW
                Neil Challis was born in Cambridge, UK. He studied mathematics at the University of Bristol and subsequently worked for some years as a m
                                                                                                                                TGXW
                Jeremy Dunning-Davies, Hull University, UK                                                                      PBW
                                                                                                                                 TDCT
               Robert’s book is intended to help owners, managers and operators with practical advice on all aspects of running a factory and concentrate
               Xuerong Mao, Strathclyde University, UK                                                                           PBW
                                                                                                                                 TDCT
               Mary Earle and Richard Earle are both Emeritus Professors at Massey University, New Zealand. They have worked on numerous NPD proje
                                                                                                                                 TDCP
               Guneri AKOVALI is a Professor Emeritus, at the Middle East Technical University (METU) of Ankara. He is a Chemical Engineer, with an MSc a
                                                                                                                                 TDCT
               Dr Bruce R Hamaker is Director of the renowned Whistler Center for Carbohydrate Research at Purdue University, USA, where he is also Pr
                                                                                                                                 TDCP
               Stuart Fairgrieve entered the field of polymers and plastics with Nairn Floors, Kirkcaldy, working on PVC plastisols. Leaving to attend St. An
                                                                                                                                 TGBN
               A M Y Razak is director of Gas Path Analysis Ltd, UK which specialises in gas turbine and rotating equipment performance monitoring and o
                                                                                                                                 TDCQ
               Dr Aldo R Boccaccini is a Reader in Materials Science at Imperial College London, UK. Dr Boccaccini has published extensively in the area of
                                                                                                                                  was
               Huub Lelieveld was President of the European Federation of Food Science and Technology for four years, andTDCT President of the Europea
                                                                                                                                 TBN
               Dr Phil Brown is an Assistant Professor in the School of Materials Science and Engineering at Clemson University. Dr Kate Stevens is a Resea
                                                                                                                                 TGM
 osites; Structure and morphology of epoxy nanocomposites with clay, carbon and diamond; Molecular dynamics of thermoset nanocomposites; Perform
                                                                                                                                 TDCT
               Dr Martin Forrest started his career in 1977 with James Walkers & Co. Ltd, and during this time he progressed to the position of Rubber Te
                                                                                                                                 is highly regarded for his resea
               Professor R Rastall holds a senior post at the University of Reading. Professor Rastall is widely published and TDCT
                                                                                                                                 TDCK
               Victor K Champagne is the Technical Team Leader of the Advanced Materials and Processes Group within the Weapons and Materials Rese
                                                                                                                                 TDH
               Professor Aleksandar Subic is the Chair of Mechanical Design and Head of Mechanical and Automotive Engineering at RMIT University in M
                                                                                                                                 TDCT
               David Julian McClements is Professor of Food Physico-chemistry at the University of Massachusetts, Amherst. Professor McClements is wid
                                                                                                                                 TH
               Allan J Organ, PhD, DEng, ScD, FIMechE is known internationally for his work on Stirling engines. He is author of some 50 technical papers a
                                                                                                                                 TDCK
               Professor Lorenzo Fedrizzi is a Senior Professor in the Department of Chemical Science and Technology at the University of Udine, Italy. He
                                                                                                                                 TDH
               Dr Mike Jenkins is a Senior Lecturer in the School of Engineering at the University of Birmingham, UK. Dr Jenkins has published widely in th
                                                                                                                                 TRC
               Professor Hua Zhao leads a large research group on IC engines and their fuels at Brunel University West London. He has over 20 years’ rese
                                                                                                                                 TDCP
               Dr Debdatta Ratna has been working as a scientist in Naval Materials Research Laboratory, Ambernath, India, for last 14 years. He did his M
                                                                                                                                 PBT
               Christopher Haines, City University, UK. Peter Galbraith, University of Queensland, Australia. Werner Blum, University of Kassel, Germany.
                                                                                                                                 TDCT
               Julia Cooper is a Senior Research Fellow for the Nafferton Ecological Farming Group (NEFG) in the School of Agriculture, Food and Rural Dev
                                                                                                                                 TGX
               Lars-Erik Lindgren is Professor of Material Mechanics at Luleå University of Technology, Sweden. He has an international reputation for his
                                                                                                                                 TNC
               Professor Vistasp M. Karbhari is Provost and Executive Vice-President of Academic Affairs at The University of Alabama in Huntsville, USA w
                                                                                                                                 THFP
               Dr John Harston is an internationally-known expert on corrosion in refining operations. In 1996 he set up Working Party 15 (Corrosion in th
                                                                                                                                 TNC
               Professor Dr-Ing. Michael Schütze is Director of Karl-Winnacker-Institut der DECHEMA (The Society for Chemical Engineering and Biotechno
                                                                                                                                 PB
               Dr. Stephen Campbell Roy from the green and pleasant Scottish town of Maybole in Ayreshire, received his secondary education at the Car
                                                                                                                                 Birmingham.Dr Mary Page is H
               Dr Chris Page is Professor of Civil Engineering Materials in the School of Civil Engineering at the University of TNC
                                                                                                                                 TDCT
epigenetics; Nutrition and genome health; Nutrition: Ethics and social implications; Proteomics; Diet and genomic stability; High-throughput genotyping;

                                                                                                                             TDCT
               Dr Hal MacFie is an independent food consultant, visiting Professor at the University of Reading and editor of the journal Food Quality and
                                                                                                                             TDCT
 otect from growth acceleration and later obesity? Later effects of breastfeeding practice: The evidence; Traditional foods vs. Manufactured baby foods;
                                                                                                                             TDCT
               P L H McSweeney is Associate Professor in the Department of Food and Nutritional Sciences at University College Cork, Ireland. Dr McSwee
                                                                                                                             TGMD5
               Dr Damien Féron is Deputy Head of the Service de la Corrosion et du Comportement des Matériaux dans leur Environment at CEA-Saclay an
               Professor Jeremy Dunning-Davies is a distinguished lecturer and author who pioneered the thermodynamicsPNF     of anti-matter and is extreme
                                                                                                                             TNC
               Professor Dr Dr h.c. Hans Grabke is former Head of the Department of Physical Chemistry at the Max Planck Institut für Eisenforschung in D
                                                                                                                             TDCT
               Andrew Taylor and Joanne Hort are both established academics at the School of Biosciences, University of Nottingham. They both belong t
               Ramon E Moore, Ohio State University, USA. Michael J Cloud, Lawrence Technological University, USA            TJF
               Edwin N. Frankel, University of California, USA                                                               TDCT
               Harald Breivik                                                                                                TDCT
                                                                                                                              and
               Professor Marc JM ABADIE is professor at the Université Montpellier 2, Sciences et Techniques du LanguedocTDCPhead of Laboratory of Pol
                                                                                                                             TDCT
o proteins; Hypoallergenicity: A principle for the treatment of food allergy; The concept of hypoallergenicity for atopy prevention; The concept of oral to
                                                                                                                             TDCT
 nary heart disease mortality differs among subject populations – familial hypercholesterolemia as a key concept; Cancer and all-cause mortalities are low
                                                                                                                              published widely, particularly
               Dr Maria Saarela holds a senior position at VTT, one of the world's leading centres for food research. She hasTDCT
                                                                                                                             TDC
               Dr Satya Prakash is Director of the Biomedical Technology and Cell Therapy Research Laboratory and Associate Professor of Biomedical Eng
                                                                                                                             TGM
               Dr Z. Xiao Guo is Professor of Materials and Director of the Centre for Clean Energy in the Department of Materials at Queen Mary Univers
                                                                                                                             TNC
               Dr Damien Féron is Deputy Head of the Service de la Corrosion et du Comportement des Matériaux dans leur Environment at CEA-Saclay a
                                                                                                                             TDH
               Dr R M Christie is Reader in Colour Chemistry in the School of Textiles & Design at Heriot-Watt University, UK. Dr Christie is internationally
                                                                                                                             TDCT
               Dr Jeya Henry is Professor of Food Science and Nutrition at Oxford Brookes University and a Visiting Professor at the Chinese University of
                                                                                                                             TDCT
               Dr Bart Weimer is Professor at the Nutrition and Food Sciences Department and Director of the Center for Integrated BioSystems at Utah S
                                                                                                                             TJF
               Igor Kononenko studied computer science at the University of Ljubliana, Slovenia, receiving his BSc in 1982, MSc in 1985 and PhD in 1990. H
                                                                                                                              TNC
              Dr Rik-Wouter Bosch works at the Belgian Nuclear Research Centre (SCK-CEN). Dr Damien Féron is Deputy Head of the Service de la Corrosi
                                                                                                                              TDH
              Professor Jinlian Hu teaches at the prestigious Institute of Textiles and Clothing at the Hong Kong Polytechnic University. A Fellow of the Te
                                                                                                                              TDK
              Dr John Harston is an internationally-known expert on corrosion in refining operations. In 1996 he set up Working Party 15 (Corrosion in th
                                                                                                                              TDPH
              Dr S P Ashdown is the Human Ecology Helen G. Canoyer Professor in the Department of Fiber Science and Apparel Design at Cornell Univer
              Trevor Palmer and Philip L Bonner, Nottingham Trent University, UK                                              TDCT
                                                                                                                              where
              Professor Keith Waldron is a Senior Scientist at the internationally renowned Institute of Food Research, UK TDCT he is head of the “Susta
                                                                                                                              are internationally renowned s
              A Y Tamime, formerly of the Scottish Agricultural College, and R K Robinson, formerly of Reading University, TDCT
                                                                                                                              TDCK
              Dr Philippe Dillmann works for the Centre Nationale de la Recherche Scientifique (CNRS) and the Commissariat à l’Energie Atomique (CEA),
                                                                                                                              TDCT
              Professor Stanley Brul is Head of the Molecular Biology Department at the Institute for Life Sciences at the University of Amsterdam and Se
                                                                                                                              TDCP
              Roy Crompton was Head of the polymer analysis research department of a major international polymer producer for some 15 years. In the
                                                                                                                              TGM
              Dr Roland Oltra is Research Director at the Laboratoire de Recherches sur la Réactivité des Solides at the Université de Bourgogne, France. D
                                                                                                                              TDH
              Professor Roshan Shishoo is a consultant in Sweden focussing on R&D strategies and is internationally renowned for his research in the fiel
                                                                                                                              TDH
              Dr Lieva Van Langenhove is Professor of Textiles at the University of Gent, and is internationally acclaimed for her research on smart textile
                                                                                                                              TTU
              Eoin H Macdonald ME, FIEAust CP Eng has an international career spanning 65 years as a consulting mining engineer and is highly regarded
                                                                                                                              TBC
              N E Shanmugam is Professor of Civil Engineering at the Universiti Kebangsaan, MalaysiaC M Wang is Professor of Engineeering Science and
                                                                                                                               Food
              Dr David Kilcast consultant, formerly Leatherhead Food Research and Dr Fiona Angus works for LeatherheadTDCT Research, a highly regar
                                                                                                                              TDH
              Dr Mohsen Miraftab is Senior Lecturer in Textiles and Dr Richard Horrocks is Research Professor in Textiles at the Centre for Materials Rese
                                                                                                                              TGM
              Professor Andrew Long is Head of the innovative Polymer Composites Research Group and is the Course Director for Mechanical Engineeri
Thermoplastic polyurethane (TPU); Copolyester TPE; TPE Additives and finishing; Processing TPEs.                              TDCP
                                                                                                                              TDCP
tronics; Polymers in substrates, assembly and reliability; Polymer formulation and recycling for electronics applications; Polymers and printed electronic
                                                                                                                              TDCT
pdate; Endothelial nitric oxide synthase as a mediator of the positive health effects of Mediterranean diets and wine against metabolic syndrome; Effect
                                                                                                                              TDCP
              Dr Vannessa Goodship is a Senior Research Fellow at The University of Warwick. She worked in the plastics industry for fourteen years prio
                                                                                                                              TDCT
              Professor Lynn Frewer and Professor Hans van Trijp both work at the Marketing and Consumer Behaviour Group of the highly regarded Wa
                                                                                                                              TDCT
              Karen Barnes, Richard Sinclair all work for the highly regarded UK Food Standards Agency. David Watson formerly Food Standards Agency
                                                                                                                              TDH
              Professor You-Lo Hsieh is in the Department of Textiles and Clothing at the renowned University of California, Davis. Dr Stuart Gordon work
                                                                                                                              TDH
              Dr Stephen Russell is a Senior Lecturer in the Centre for Technical Textiles, University of Leeds and the Director of the Nonwovens Research
                                                                                                                              TGM
              Professor R W Sarsby is the Section Leader for Civil Engineering (SEBE) at the internationally acclaimed University of Wolverhampton, UK.
                                                                                                                              TGM
              Rakel Lindström, Vincent Maurice, Lorena H Kleinm and Philippe Marcus work at the Laboratoire de Physico-Chimie des Surfaces in the Ec
                                                                                                                              TGM
              Dr Roar Myrdal works for Rescon Mapei AS, Norway. He is a member of Task Group 5 of the European Federation of Corrosion Working Pa

                                                                                                                              TDCT
            Professor Geoff Mead is internationally renowned for his research on microbiological aspects of poultry production and processing.
                                                                                                                              TNC
            Professor Michael Raupach teaches and researches at Aachen University, GermanyDr Bernhard Elsener works for the University of Cagliari,
            Professor Fereidoon Shahidi is a University Research Professor at the Memorial University of Newfoundland,TDCT     Canada. He is highly respected
                                                                                                                              TDCT
            Dr Clare Mills works for the highly regarded Institute of Food Research, UK. Dr Harry Wichers works at Agrotechnology & Food Innovations,
                                                                                                                              TDCP
            Dr Vince Coveney is Director of the Engineering and Medicine Elastomers Research Centre at the University of the West of England. He is a
                                                                                                                              TDH
            Dr Ning Pan is a Professor at the University of California, Davis, in the Division of Textiles and Clothing and the Department of Biological/Agr
                                                                                                                              TGXW
            Dieter Radaj, Dr-Ing habil, is Professor of Mechanical Engineering at Braunschweig Technical University, and former Senior Research Manag
                                                                                                                              TDCT
            Kerstin Skog is a Senior Lecturer in Applied Nutrition and Professor in Food Chemistry at Lund University, Sweden. Jan Alexander is the Dire
                                                                                                                              TNC
oplastic composites with hybrid yarns and textile preforms; Compaction and consolidation of hybrid yarns; Hybrid yarn structure – composite property
                                                                                                                              TDCT
            Dr Morris Potter is the Lead Scientist for Epidemiology in the Center for Food Safety and Applied Nutrition of the United States Food and D
            John Norrish is Professor of Materials Welding and Joining at the University of Wollongong, Australia.            TGM
                                                                                                                              TDCT
            A qualified Master Butcher, Gerhard Feiner has worked in the meat industry for over twenty years. He has been a Factory and Production M
                                                                                                                              TDCT
            Frank D Gunstone is Emeritus Professor in the University of St Andrews and Honorary Research Professor at the Scottish Crop Research Ins
                                                                                                                               Design
            Richard Bibb BSc (Hons), PhD is Reader and Head of Medical Applications at The National Centre for ProductMGB & Development Resea

                                                                                                                            TGMT D
             Professor Erkki Niemi is Emeritus Professor of Steel Structures in Lappeenranta University of Technology, Finland. 
 r-Ing. Wolfgang Fricke is
                                                                                                                            TDCT
             Ralston Lawrie was one of the world’s leading authorities on meat science. Formerly Emeritus Professor of Food Science in the University o
                                                                                                                            TGXW
             Dr Gurney worked at TWI (formerly the British Welding Research Association) for over thirty years, during which time his primary interest w
                                                                                                                            TDCT
             Professor K V Peter is Vice-Chancellor and former Director of Research at Kerala Agricultural University, India. He was formerly Director of t
                                                                                                                            TDPH
             Dr Winnie Yu and Dr Jintu Fan are Associate Professor and Professor respectively in the prestigious Institute of Textiles and Clothing at Hon
                                                                                                                            TDCT1
             Dr Charles Bamforth is Anheuser-Busch Endowed Professor of Brewing Science at the University of California. He is also Visiting Professor o
             Keith Cousins graduated from Oxford University with an Engineering Science degree and followed a graduateTDCP   apprenticeship with one of th
               Dr Heikki Mattila is Professor of Textile and Clothing Technology at Tampere University of Technology, Finland. TDPH
                                                                                                                               TDCT
               Professor William J. Spillane works within the Chemistry Department of the National University of Ireland, Galway. He has published widely
                                                                                                                               TDC
               Dr Derek Brewis first became interested in adhesion when he joined the Petrochemical and Polymer Laboratory of ICI in 1964. From 1967 h
                                                                                                                               TGM
               Duane Kritzinger CEng, PrEng, MRAeS, MBA has been practicing aircraft system safety since 1994. A 13-year career in the South African Air
                                                                                                                               TGMT
ponses to ballistic impact; Modelling ballistic impact; Standards and specifications for lightweight ballistic; Testing lightweight ballistic materials. Part 2 T
               Jean-Maurice Vernaud gained his first degree in chemistry and physics in 1956 and before his retirement wasTDCT   a professor at the University o
                                                                                                                               TDCP
               David Platt graduated from the University of Nottingham with an Economics degree before completing an MBA at the University of Bradford
 t to operating conditions; Comparison of approximation methods applied to a complex non-linear analytical transmission TH      model; Gear teeth impacts in h
                                                                                                                               TDCT
               David Bender is Senior Lecturer in the Department of Biochemistry of University College London. The late Arnold Bender was Emeritus Prof
                                                                                                                                ‘local
d Mediterranean food plants – ethnobotanical investigations and historical development; Disseminating knowledge about TDCT food plants’ and ‘local p
                                                                                                                               TDCT
d children; Protein requirements of infants and children; Growth of breast-fed and formula-fed infants; Body composition during the first year of life; Die
                                                                                                                               TDCT
 ment of diabetes; Pharmacological and surgical intervention for the prevention of diabetes; The glycemic index: Methodology and use; The argument ag
 evices; Bonding medical plastics; Textiles in medical devices; Regulatory requirements in the medical industry; PolyolefinsMGB in healthcare; Polymer proces
                                                                                                                               TDCP
 id silicone rubber; Pocessing silicone elastomers; Additives and finishing for silicone elastomers; Medical applications of silicone elastomers.
               Kåre Larsson, Peter Quinn, Kiyotaka Sato and Fredrik Tiberg                                                     TDCT
                                                                                                                               TDCT
 s in infancy and childhood for prevention of atherosclerosis and the metabolic syndrome; Childhood obesity: Potential mechanisms for the developmen
 ms; Turbines; Mechanical aspects; Additional papers.                                                                          TGBN
                                                                                                                               TDCT
               Yasmine Motarjemi is Corporate Food Safety Manager in the Quality Department at Nestec Ltd, SwitzerlandMartin Adams is Professor of Fo
                                                                                                                               TDCK
               Brian Mellor works at the University of Southampton and is a member of the Institute of Materials and a chartered engineer. He has a num
                                                                                                                               TGXW
               Formerly at the Welding Technology Department of the Royal Institute of Technology in Stockholm, Professor Klas Weman has worked for E
                                                                                                                               TBC
               N E Shanmugam is Professor of Civil Engineering at Universiti Kebangsaan, Malaysia. C M Wang is Professor of Civil Engineering at the Natio
                                                                                                                               TGM
               John Martin is Emeritus Reader in Physical Metallurgy at the University of Oxford and a recipient of the Platinum Medal of the Institute of M
                                                                                                                                have
               Hitoshi Ujiie has over twenty years experience in high-end textile design and manufacture, his achievementsTDPP combined first hand indu
                                                                                                                               TDPH
               Dr Y Li is a Professor at The Institute of Textiles and Clothing at The Hong Kong Polytechnic University, Hong Kong. He is a Fellow of The Text
                                                                                                                               TNC
               H C Wu is a professor at Wayne State University, currently researching advanced construction materials, structural mechanics and infrastru
                                                                                                                               TDPH
               Dr Li is a Professor at The Institute of Textiles and Clothing at The Hong Kong Polytechnic University, Hong Kong. He is a Fellow of The Textile
                                                                                                                               KNJH
               Martin Thompson (Editor) – Martin Thompson retired as Commercial Adviser from Rio Tinto plc in 1999, having joined the company in 1968
                                                                                                                               TDCP
te joints; Resistance welding; Pretreatment; Bonding fluoropolymers; Ultrasonic welding and vibration welding; Heated tool welding; Laser welding.
                                                                                                                               TDCP
               Roy Crompton was Head of the polymer analysis research department of a major international polymer producer for some 15 years. In the
                                                                                                                               TGXW
               Professor Michael Ferry MIMMM, CEng, MIEAust, CPEng is in the School of Materials Science and Engineering in the University of New Sou
                                                                                                                               TDCT
               Stan Cauvain was formerly Director of the Cereals and Cereals Processing Division at Campden and Chorleywood Food Research Association
               Clive Blackburn works at Unilever Research Colworth, and has published widely on the control of foodborne TDCT   pathogens.
                                                                                                                               TDH
               Dr Youjiang Wang is a Professor of Polymer, Textile and Fiber Engineering at Georgia Institute of Technology. He is a fellow of the American
               Professor Andreé Voilley is a professor at Université de Bourgogne. Patrick Etiévant works at INRA, France. TDCT
                                                                                                                               TDCT
               Ian Smith is Managing Director of the UK Division of AIM (Association for Automatic Identification and Mobility), internationally-known for
               Jonathan M Blackledge, Loughborough University, UK                                                              TJF

                                                                                                                           TBN
             Dr Richard Hannink is an Honorary Fellow at CSIRO Manufacturing and Infrastructure Technology, Australia.Dr Anita Hill is a Research Scient
                                                                                                                           TDCP
             Dr Yiu-Wing Mai is Professor of Mechanical Engineering and Director of the Centre for Advanced Materials Technology at the University of S
ovative rubber bonding systems; Bonding rubber to plastics; Bonding silicones.                                             TDCP
                                                                                                                           TDCK
             Dr Vivek Apte is a Senior Research Scientist with CSIRO Manufacturing and Infrastructure Technology (CMIT), and has led a number of proj
                                                                                                                           TDH
             Dr John Xin is an associate professor in the Institute of Textiles and Clothing at The Hong Kong Polytechnic University. He is a Charted Colou
                                                                                                                           TGBF
             Dr Har Prashad works in the Research and Development Division of Bharat Heavy Electricals Limited (BHEL), one of the world’s leading man
                                                                                                                           TDCT
             Professor Christine Williams is Hugh Sinclair Professor of Human Nutrition and Head of the School of Food Biosciences at the University of R
                                                                                                                           TDCT
se; Bulk sweeteners used in sugar chewing gum; Polyols: their properties and applications in sugar-free chewing gum; High-intensity sweeteners in sugar
                                                                                                                           TDCQ
             Professor I M Low gained his B.Eng. And Ph.D. degrees in Materials Engineering from Monash University prior to taking up lecturer position
                                                                                                                           TDCT
             Dr Susan L Hefle is Associate Professor and Co-Director of the Food Allergy Research and Resource Program (FARRP) at the University of Ne
                                                                                                                           TBC
             Kan Ding is a Research Engineer at Comalco Research & Technical Support (CRTS) Comalco Aluminium Limited, Australia. Lin Ye is a Professo
                                                                                                                           TDCP
             Norman Lee has held various positions in the plastics industry in product and process design and development, in a career of over forty yea
                                                                                                                           TGMT
             George T Hahn (ScD, MIT, 1959) is Professor Emeritus of Mechanical Engineering and Materials Science at Vanderbilt University, Nashville, T
                                                                                                                           TGM
             After graduating with a 2.1 Honours Chemistry degree, Michelle Miller undertook a Ph.D. at University of Salford and the University of Kee
                                                                                                                           TDH
             Richard Blackburn is a Senior Lecturer in Textile and Colour Chemistry at the University of Leeds. His research interests include thermodyna
                                                                                                                             MGB
              Professor Subhash Anand is Professor of Technical Textiles at University of Bolton, has published widely in a number of areas of textiles and
              Jonathan M Blackledge, Loughborough University, UK                                                             TJF
                                                                                                                              From
 ew metallurgical processes; Twenty five years on; Electroslag remelting – A modern tool in metallurgy; Eurosteelresearch;TGXW invention to industrial d
                                                                                                                             TGB
              Hassan Behery is Emeritus Professor of Textile Science at Clemson University, USA. He earned his Ph.D. in textiles from Manchester Univers
                                                                                                                             TDCT
              Huub Lelieveld was President of the European Hygienic Engineering and Design Group (EHEDG) for over 12 years. Until his retirement he wa
fect chemistry of ternary oxides; Introduction to thermoelectricity; The measurement of thermoelectricity; Interface massTGM  transport in oxide materials; S
                                                                                                                             TDH
              Richard Scott worked as the Chief Scientist at the Research and Technology Group of the Defence Clothing and Textiles Agency (DCTA) at th
                                                                                                                             KNAC
              Cotton Trading Manual is edited by the Secretariat of The International Cotton Advisory Committee (ICAC). Formed in 1939, the ICAC is an
                                                                                                                             TDCT
              Dr David Mela is a senior scientist and leader of the Energy, Weight Control & Performance expertise group at the Unilever Health Institute
                                                                                                                             TGXW
              Dr Zhili Feng is a Senior R&D Staff Member of Materials Joining and NDE group of Metals and Ceramics Division. He has won numerous awa
                                                                                                                             TDM
              Seshadri Seetharaman is Professor of Materials Process Science at the prestigious Royal Institute of Technology in Stockholm, Sweden. Pro
                                                                                                                             TJF
              Dr David Bucknall is an Associate Professor at the Georgia Institute of Technology. He holds a joint appointment in the School of Polymers,
                                                                                                                             TGXW
              Dr Nasir Ahmed is a Consultant and an Honourary Fellow of Manufacturing & Infrastructure Technology, Division of the Commonwealth Sc
                                                                                                                             TDH
              Qinguo Fan is an Associate Professor of Textile Chemistry at University of Massachusetts Dartmouth. His research interests include textile c
                                                                                                                             TDC
              Larry L Hench is Professor of Ceramic Materials at Imperial College London and Co-Director of the Tissue Engineering and Regenerative Med
                                                                                                                             TNC
              Gongkang Fu is Professor of Structural Engineering at Wayne State University, USA. He is an internationally-recognised expert in bridge and
                                                                                                                             TDH
              Dr Philippe Westbroek is a Postdoctoral Researcher at the Ghent University, Belgium, in the department of Textiles.Prof Georgios Priniotakis
              Professor Costas Soutis is Head of Aerospace Engineering at The University of Sheffield. Dr Peter Beaumont isTGMReader in Engineering at the U
                                                                                                                             TEFO
              Roshan Shishoo PhD, Professor in Fibre Technology, formerly Director of Research and Managing Director ofTDH and IFP Research institu
                                                                                                                             TRC
              Professor Yamagata joined Yamaha Motor Co. Ltd, Japan, after obtaining his engineering doctorate from Tohoku University. He has receive
                                                                                                                              and
              Professor Wim Jongen holds the chair in Product Design and Quality Management at Wageningen UniversityTDCThas been scientific directo
                                                                                                                             TDCT
              Professor Geoffrey Mead was formerly at the Royal Veterinary College, University of London. Now a consultant, he has an international rep
              Professor M A Hann Chair of Design Theory at the University of Leeds and Director of the University of LeedsTDH International Textiles Archive
                                                                                                                             TDCT
              John N Sofos is Professor of Meat Microbiology at Colorado State University and a well-known authority on meat safety.
                                                                                                                             TGM
              Andrew Long has been at the School of Mechanical, Materials and Manufacturing Engineering at Nottingham University since 1990 and wa
                                                                                                                             TDCT
              Mansel Griffiths is Professor of Food Science at Guelph University and Director of the Canadian Research Institute for Food Safety. He has a
                                                                                                                             TDCT
              Professor Dr-Ing Helmar Schubert is the Emeritus Head of the Institute of Food Process Engineering of the University of Karlsruhe. Dr-Ing M
                                                                                                                             TGM
              John Lancaster has had wide experience of welded fabrication, firstly at the APV company which manufactured vessels and piping in stainle
              Dr Pu Chen holds the Canada Research Chair in Nano-Biomaterials at the University of Waterloo, Canada. TGM
              Dean Nichols has a BSc. (Hons.) degree in biology and has worked for THOR, a speciality chemicals company TDCP and leading biocide company,
              Edwin N. Frankel, University of California, USA                                                                TDCT
                                                                                                                             TDCT
d dietary behavior; Age and gender dependent profile of food choice; Diversification in indigenous and ethnic food culture; Organic foods: Do they have

                                                                                                                              TDCP
               Güneri Akovali received his bachelor and master degrees in chemical engineering from Ankara University, whereas his doctorate was compl
                                                                                                                              A and
ase: Evolutionary, developmental and transgenerational influences; Nutrient effects upon embryogenesis: Folate, vitamin TDCT iodine; Energy requirem
                                                                                                                              TDCT
h in a world of plenty? Physiological vs. pathological changes of nutritional status over life time; Home enteral nutrition; When does malnutrition becom
                                                                                                                               of age;
 and early childhood; Celiac disease: Effect of weaning on disease risk; Gut microbiota in infants between 6 and 24 monthsTDCT Malabsorption of carb
                                                                                                                              TDCT
sity in childhood: The Greek experience; Epidemiology of physical activity from adolescence to young adulthood; Adolescent obesity and physical activit
                                                                                                                              TDCT
y; Nutrition and schizophrenia; Managing obesity after menopause: The role of physical activity; Osteoporosis: A complex disorder of aging with multiple

                                                                                                                            TDCT
he European Union; Energy and nutrient intake in the European Union; Health indicators and status in the European Union; General discussion; Annexes
                                                                                                                            TCB
               Wayne Rogers interest in sterilisation and polymers began 34 years ago when he worked at the Castle Steriliser Research Laboratory on the
                                                                                                                            TDCK
               P Vadgama is Director of the Interdisciplinary Research Centre in Biomedical Materials at Queen Mary, University of London.
                                                                                                                            TDH
               Dr Tatsuya Hongu NEDO Working Group for Nano-fiber Technology Survey and Director of Suga Weathering Technology Foundation and vis
               Professor Xiao Guo currently works in the Materials Technology department of Queen Mary University, London   TNC
                                                                                                                            TCB
               John F Kennedy is a director of Birmingham Carbohydrate and Protein Technology Group, University of BirminghamGlyn O Phillips is the ch
               Dr Ray Smith is a senior lecturer in the Materials Department at Queen Mary University of London.            MGB
                                                                                                                            TDCP
 the International Rubber Study Group. There is also a new presentation on studies of food contact applications of high performance elastomers, with m
                                                                                                                            TDPH
               Xiaoming Tao is Head and Chair Professor at Hong Kong Polytechnic University. Prof. Xiaoming Tao is Chair Professor and Head of the Instit
                                                                                                                            TDH
               After graduating from the Scottish Woollen Technical College (now the Faculty of Textiles of Heriot-Watt University), Robert Franck started
                                                                                                                            PBT
ns; Distribution function; Functions of random variables; Bivariate distributions; Expectation of a random variable; Variance of a random variable; Mome
               Robert Adams is Professor of Applied Mechanics at University of Bristol                                      TDC
                                                                                                                       TGXW
ng symbols: Butt/groove welds; Welding symbols: Fillet weld; Welding symbols: Spot welds; Location of symbols 1: Butt welds; Location of symbols 2: Fil
eshooting; Testing; Markets; Future trends in rubber-to-metal bonding.                                                 TDC
             Professor Böhni worked at the Swiss Federal Institute of Technology (ETHZ), until his retirement in 2002. TNC
                                                                                                                       TDCT
             S P Cauvain has recently retired from Campden and Chorleywood Food Research Association, UK, where S Salmon and L S Young currently

                                                                                                                              PB
 r analysis; Analytic representation; Multiplication of generalised functions; Infinitesimal analysis; Non-standard theories; References and index.
                                                                                                                              TDH
               Catia Bastioli is the Managing Director and Research Manager of Novamont, a leading innovation company in the sector of bioplastics. She
               David N Burghes, University of Exeter, UK. Alexander Graham, The Open University, UK                           PBW
                                                                                                                              TDH
               Professor J E McIntyre graduated in Chemistry from the University of St Andrews and worked for ICI Fibres in research and research manag
                                                                                                                               and
               Dr Jinlian Hu was awarded a PhD from the University of Manchester Institute of Science and Technology, UK TDH went on to lecture at the
               John D Boon, Virginia School of Marine Science, USA                                                            TQ

                                                                                                                                TDCP
                                                                                                                                TDCT1
                Dennis Briggs was formerly Senior Lecturer in the British School of Malting and Brewing in the University of Birmingham. With Jim (J.S.) Hou
                                                                                                                                TDPH
                Dr Fan was awarded a PhD from the University of Leeds in 1989 and is now Associate Professor at the Institute of Textiles and Clothing at th
                Caroline Baillie is the Dupont Canada Chair of Engineering Education Research and Development at Queen’s TGM    University, Ontario. Her resear
                Dr Anna Arnoldi is Professor of Food Chemistry in the Faculty of Pharmacy at the University of Milan, Italy. TDCT
                                                                                                                                TDCT
                Dr D Watson is formerly Head of Branch 5 of the Chemical Safety and Toxicology Division of the UK Food Standards Agency. He has written
                                                                                                                                TDH
                Dr W D Schindler is Professor of Textile Chemistry and Textile Finishing at the University of Applied Sciences Hof, Germany. His main researc
                                                                                                                                TDCT
                Ann-Charlotte Eliasson is Head of the Department of Food Technology, Engineering and Nutrition and Professor of Cereal Technology at th
                Professor Naresh Magan is Head of the Applied Mycology Group at Cranfield University, UK. Dr Monica OlsenTDCT    is a Senior Biologist at the Nat
                                                                                                                                TDCT
                Professor Philip Richardson is Head of the Food Manufacturing Technologies Department at the internationally renowned Campden BRI, U
                                                                                                                                TGXW
                Dr Chris Farrar graduated from Cambridge University in 1966 and was later awarded a PhD from the University’s Department of Metallurgy
                                                                                                                                KNAC
                Sergey Gudoshnikov is a senior economist with the International Sugar Organization, London. He has been professionally involved in the glo
                                                                                                                                TDCT
                Professor Claude Remacle is Head of the Unit of Animal Biology at the internationally-renowned Université Catholique de Louvain, where D
                Anna Nicolaou, University of Bradford, UKGeorge Kokotos, University of Athens, Greece                           TDCT
                                                                                                                                TDCT
  of iron, iodine and vitamin A; The epidemiology of vitamin D and calcium deficiency; Epidemiology of micronutrient deficiencies in developing and deve
                                                                                                                                TDH
 f acetate and triacetate fibres; Mass pigmentation and solution dyeing of synthetic fibres; Dyeing of microfibres; Dyeing and finishing of fabrics containin
                                                                                                                                TDCT
s of allergy; The changing prevalence and clinical profile of food allergy in infancy; The hygiene hypothesis: Modulation of the atopic phenotype by envir
                                                                                                                                TDCT
tal influences on diseases in later life; Insulin sensitivity: Normal and abnormal; Insulin resistance in catabolic diseases; Mechanisms of insulin-induced al
                                                                                                                                TDC
                Dr Dave Dunn is President of FLD Enterprises Inc., a US based technical consulting firm, specialising in adhesives and sealants. He has traini
                                                                                                                                TDCP
                Dr Utracki is a Senior Research Officer, past Head of the Industrial Polymers Section at the SPE and past ‘adjoint au Directeur’ of the Nation
 ent and business and industry issue.                                                                                           TDCP
                                                                                                                                TDCT
                Professor Geoffrey Mead was formerly at the Royal Veterinary College, University of London. Now a consultant, he has an international rep
                                                                                                                                TGM
ion. Part 5 Design and optimisation. Part 6 Failure analysis. Part 7 FEM/simulation. Part 8 Fracture. Part 9 Impact. Part 10 Industrial application. Part 11 I

                                                                                                                              TDCT
sease risk; Genes, diet and plasma lipids: The evidence from observational studies; Dynamic relationships between the genome and exposures to environ
                Dr Bob Steele is Head of the Packaging Materials Development Section of Food Science Australia.               TDCT
                                                                                                                              PB
 ; Applications to elementary real analysis; Further developments; Foundations of nonstandard analysis; Hyperfinite analysis; Hyperfinite representation
                                                                                                                              TGXW
 Microstructural aspects and thermodynamics stability of nitrogen bearing stainless steels; Corrosion properties of nitrogen bearing stainless steels; Mec
                Dlawer Ala Aldeen, University Hospital, Nottingham, UK. Keiichi Hiramatsu, University Of Juntendo, Japan. TDCT
                                                                                                                              TNC
trengthening of metallic and timber structures. Part 4 Development of FRP materials and systems. Part 5 Analysis, design and testing. Part 6 Durability an
                                                                                                                              TDCT
                Rickey Yada is Professor of Food Science at the University of Guelph, Canada, where his main research interests are the structure-function
                                                                                                                              TDH
                Henry McKenna is President of Tension Technology International which is based in the USA and UK. He has extensive experience in rope ma
                Mike Edwards is Head of the Microscopy Section at the internationally renowned Campden BRI.                   TDCT
                                                                                                                              TDCT
                Dr David Kilcast is formerly Head of Sensory and Consumer Sciences at Leatherhead Food International. He is also past Chair of the Sensory
                                                                                                                              TDCT
                Professor K V Peter is Vice-Chancellor and former Director of Research at Kerala Agricultural University. He was formerly Director of the Ind
 us flame retardants; Smoke suppressants; Other flame retardants and recent FR technology advances.                           TDCP
                                                                                                                              TDCT
                Roger Wood, Lucy Foster, Andrew Damant and Pauline Key all work on additive analysis for the UK Food Standards Agency.
d fabric development.                                                                                                         TDH
                                                                                                                              TGM
                Hugh McArthur Corrosion Consultant to automotive and steel industries. Duncan Spalding, De Montfort University, UK
                                                                                                                               best
 elding, but it also includes many other relevant sections all closely connected to welding. It also shows how to achieve theTGXWresults with any particula
                 Helmut Ratschek, Heinrich Heine Universitat, Germany. Jon Rokne, University of Calgary, Canada                    PBM
                                                                                                                                   TGM
                 Professor Bryan Harris graduated in Industrial Metallurgy from the University of Birmingham, subsequently taking a PhD at Cambridge Univ
                                                                                                                                   TNC
                 Guoxing Lu is currently Professor at the School of Engineering and Science, Swinburne University of Technology, Melbourne, Australia. He o
                                                                                                                                   TDCT
                 Peter Zeuthen recently retired as Head of the Department Of Biotechnology and Food at the Technical University of Denmark. Leif Bogh-So
                                                                                                                                   TDCT
                 Dr Michele Lees is Director of Collaborative Research at Eurofins Scientific Laboratories, internationally known for its work on food analysis
                                                                                                                                   TGM
x composites. In the papers various topics and issues are considered such as: analytical and numerical studies related to the design of composites, predic
                                                                                                                                   TGXW
                                                                                                                                   TDCT
                 Berit Mattsson and Ulf Sonesson work for the internationally-renowned Swedish Institute for Food and Biotechnology (SIK). Both Dr Matts
                                                                                                                                    Msc
                 Artur Cavaco-Paulo graduated from the University of Lisbon with his first degree. He then went on to take hisTDH and PhD at the University
                                                                                                                                   TDCT
                 Effiong Essien is responsible for quality assurance and new product development at a leading manufacturer of processed meat products. H
                                                                                                                                   TDCT
                 Stan Cauvain is Director of Cereals and Cereals Processing at Campden and Chorleywood Food Research Association. He is widely acknowle
                                                                                                                                   TNC
                 Jan Bijen is Professor of Materials Science in the Civil Engineering Materials Section of the Faculty of Civil Engineering and Geosciences at D
                                                                                                                                   TDCT
                 Dr Ibitsam E. Tothill is Reader in Analytical Biochemistry and Course Director for the MSc in Environmental Diagnostics at Cranfield Biotech
                                                                                                                                   TQD
                 Rodney Tolley is an internationally known authority on green transport issues. He is Director of CAST (The Centre for Alternative and Susta
                                                                                                                                   TGXW
                 Pan Jiluan is Professor and Chair of the Department of Mechanical Engineering at Tsinghua University, Beijing and is also President of Nanc
                                                                                                                                   TDCT
                 Professor Gerrit Smit is Manager of the Flavour, Nutrition and Ingredients Department at NIZO Food Research, one of Europe's leading cen
                                                                                                                                   KNAF
                 James L Anderson is a professor and chair of the Department of Environmental and Natural Resource Economics at the University of Rhode
                                                                                                                                   TDCT
                 Huub Lelieveld was President of the European Hygienic Engineering and Design Group (EHEDG) for over 12 years and works at one of Europ
                                                                                                                                   TRC
                 Dr Nieuwenhuis and Dr Wells both work at the prestigious Centre for Automotive Industry Research (CAIR) at Cardiff University. Their man
                                                                                                                                   TDH
                 Mike Jenkins studied Chemistry before completing a PhD in Polymer Science at the University of Birmingham, UK. During a 3 year joint app
                 Peter R Lord is Abel Lineberger Professor of Textiles Emeritus at North Carolina State University. He was alsoTDH  President of Raltex Corporatio
                                                                                                                                   TGXW
                 Klas Weman is an engineer with great experience in the area of welding obtained both from his work at ESAB and as professor at Royal Ins
                                                                                                                                   TDCT
                 Professor Brian M. McKenna is Head of the Food Science Department at University College Dublin. He is the editor of the Journal of Food E
                                                                                                                                   TDH
 al finishing - traditional and modern; Water-repellency and waterproofing; Flame-retardant finishes and finishing; Chemical softening; Antistatic and soi
                                                                                                                                   TQ
Accuracy of ocean winds and wind stress; Wind over waves coupling; Sea surface roughness parameterization; Direction of wind stress vector over wave
                 Gar De Barra, University of London, UK                                                                            PB
                                                                                                                                   TDCT
                 Professor Sibel Roller is Head of Human Sciences at Thames Valley University. She is a leading expert in the field of natural antimicrobials, a
                                                                                                                                   TDCT
                 Professor Tom McMeekin is Director of the Centre for Food Safety and Quality at the University of Tasmania, Australia.
                                                                                                                                   TDCT
                 Raija Ahvenainen is Editor-in-Chief of the magazine Kehittyva elintarvike. She was formerly Manager of the Packaging and Food Group at V
                                                                                                                                   with
                 Professor Keith Slater is Adjunct Professor in the School of Engineering at the University of Guelph, Canada, TDH a specialisation in textile
                                                                                                                                   TDCT
  Nutritional composition of selected wild plants in the diet of Crete; Kanjero (Digera arvensis) and drumstick leaves (Moringa oleifera): Nutrient profile a
s; Post-secondary modelling; Research; Perspectives; Reflections on the 20th anniversary of ICTMA.                                 PBT
                                                                                                                                   TDCT
e host inflammatory response to injury and inflammation; Modulation of the post-burn hypermetabolic state; Nutrition support in critical illness: Amino
                 Ralph E. Timms                                                                                                    TDCT
                 Frank D. Gunstone, Scottish Crop Research Institute, Dundee, Scotland.                                            TDCT
                                                                                                                                   TDCT
es for micronutrients for healthy north American infants: A process of trials and errors; Assuring micronutrient adequacy in the diets of young infants; Io
                                                                                                                                   TDCT
 rtance of omega-6/omega-3 fatty acid ratio in cell function; Omega-6/omega-3 ratio and brain-related functions; Dietary prevention of coronary heart d
                 Richard O. Adlof, NCAUR, USDA-ARS, Peoria, USA                                                                    TDCT
                                                                                                                                   TDCT
                 Professor Ian Johnson works at the UK Institute of Food Research. Professor Gary Richardson is Head of Metabolic and Genetic Regulation
                                                                                                                                   TDCT
                 Teun Boekhout and Vincent Robert both work at the distinguished Centraalbureau voor Schimmelcultures (CBS) in The Netherlands, noted
 etitions; Section C Using technology in the teaching of modelling; Section D Models for use in teaching; Section E Teacher PBT    education; Section F Innovativ
                                                                                                                                   TDH
                 Y Li graduated from The North-West Institute of Textile Science and Technology with a Beng in Textile Engineering in 1982 and an Msc in 19
                                                                                                                                   TDH
                 Li Yi is Associate Professor at the Institute of Textiles and Clothing, Hong Kong Polytechnic University. He has produced numerous scientific p
                                                                                                                                   TDCT
                 Dr Brian Baigrie works for Reading Scientific Services Ltd, which has an international reputation for its work in identifying taints and off-flav
                 Jeremy Dunning-Davies, University of Hull, UK                                                                     PBW
                                                                                                                                   leading
                 Professor Tiina Mattila-Sandholm and Dr Maria Saarela both hold senior positions in VTT, one of the world's TDCT centres for food resea
                                                                                                                                   TQD
                 Susan Buckingham is a Senior Lecturer at the Department of Geography and Earth Sciences, Brunel University, UK. Kate Theobald is a Senio
                                                                                                                                   TDCT
                 David Watson is formerly Head of Branch 4 of the Chemical Safety and Toxicology Division of the UK Food Standards Agency. He has written
                                                                                                                                   KCLT
                 Jennifer Spencer has worked with the Meat and Livestock Commission in Milton Keynes, UK for nearly 25 years. From 1983 to 1988 she was
                                                                                                                                   RNH
 s and water from sizing processes; Reuse of water from scouring and bleaching processes; Options available for recycling effluent and operational consid
                                                                                                                                   TDH
 ration; Discharge, resist and special styles; Production and properties of printing pastes; Fixation and after treatment processes; The use of digital system
 eir flame retardancy; End-user market sectors; Fire testing; Environmental and regulatory matters.                                TGM
                                                                                                                              TGXW
ng of welding temperature fields; Modelling of welding residual stresses and distortion; Thermodynamic and thermomechanical material properties; Me
              David K Smith, University of Exeter, UK                                                                         PBW
                                                                                                                              TNC
1: Formulae for orthogonal co-ordinate systems; A2: Harmonic and biharmonic functions; A3: Equations in vector form; A4: Direct tensor notation; A5: P
              Timothy J Mason, University of Coventry, UK. Dietmar Peters, University of Rostock, Germany                     PNF
                                                                                                                              KMB
              Janichi Ujiie is the President and CEO of Nomura Holdings, Inc. He has held various senior management positions in the research and intern
                                                                                                                              TGMT
              Dr Ashley Clarke graduated from Imperial College, London in 1967 and gained his doctorate there in space physics in 1972. After a research
                                                                                                                              TDCK
corrosion; Crevice corrosion; Sensitization and testing for intergranular corrosion; Metallurgical influences on stress corrosion cracking; Stress corrosion
                                                                                                                              TDH
              Hugh Gong graduated from Dong Hua University in Shanghai in 1984 with a degree in mechanical engineering, and gained his doctorate in
                                                                                                                              TDCP
              John Kennedy is Director of the Birmingham Carbohydrate and Protein Tehcnology Group, School of Chemistry, University of Birmingham. H

               David Brown, University of Bath, UK                                                                             TDCT
                                                                                                                               PNF
               Slawomir C Siekierski, Institute of Chemistry and Nuclear Technology, Poland. John Burgess, University of Leicester, UK.
                                                                                                                               TDCT
               Martyn Brown was formerly a Senior Microbiologist, Unilever Savoury Global Supply Chain and Technology Group, UK. Now a consultant, h
                                                                                                                               TGXW
               Gene Mathers is currently employed as a Welding Engineering Consultant at TWI. He formerly held the position of Head of the School of W
                                                                                                                               TJK
               Barry Elliott has twenty years' experience in the telecommunications business. He started his career with the UK Civil Aviation Authority an
               Hugh McClintock, University of Nottingham, UK                                                                   TQD
                                                                                                                                 the
               Dr John Kerry and Dr Joseph Kerry both teach at University College, Cork. Professor David Ledward is Head ofTDCTFood Molecular Sciences
               William R Spillers, New Jersey Institute of Technology, USA                                                     TNC
                                                                                                                               PBM
r, scale invariant behaviour, and self-organised-criticality; Fractional integrals, singular measures and epsilon functions; Diffusion on fractals: Efficient alg
                                                                                                                                sensory
               Dr Douglas MacDougall retired recently from the University of Reading, where his research concentrated on TDCT analysis and the relati
                                                                                                                               TDCT
               Jeya Henry is Professor of Human Nutrition at Oxford Brookes University and a member of the Board of the UK Food Standards Agency. He
                                                                                                                               TDCT
               Professor Wim Jongen is Head of the Product Design and Quality Management Group at Wageningen Agricultural University. He is also Scie
                                                                                                                               TDCT
               Professor Thomas Ohlsson works within the internationally-renowned Swedish Institute for Food and Biotechnology (SIK) and is a well-know
                                                                                                                               TDCT
               Professor H Allan Bremner is an internationally-known authority on aspects of fish quality. He recently retired from the Danish Institute for
                                                                                                                                who
               John Jessop was a highly respected and well known figure throughout a 40 year career in the metals market, KNATsadly died before comple
                                                                                                                                is Senior Associate Lecturer in
               Steve Finch is Senior Lecturer in Crop Production at the Royal Agricultural College, Cirencester. Alison SamuelTDCT
                                                                                                                               TDH
 tufting; Patterning systems for tufted; Craft and related products; Axminster weaving; Wireloom weaving; Face-to-face weaving; Flat woven carpets; Pro
                                                                                                                               TDH
  the link between the Encyclopedia of Textile Finishing and the Lexikon der Textilveredelung from the same author. It is supplemented by a comprehens
                                                                                                                               TDCT
Fatty acids and gene expression related to inflammation; Nutritional modulation of gut inflammation; How valid is the concept of antioxidants and cell in
                                                                                                                               TDH
               Dr W S Simpson spent most of his working career with the Wool Research Organisation of New Zealand (WRONZ), and held the position of
                                                                                                                                was
               Walter Fung has worked in the textiles industry since 1965 when he joined Courtaulds Research Division. He TDH a technical specialist in dy
                                                                                                                               TDCT
HACCP; Maintaining a clean working environment; Determining the quality; Choosing the packaging; The UK ready meals market; The microbiological sa
                                                                                                                               TDM
                                                                                                                               TDCT
               Dr Stephen James is Director and Dr Christian James is a member of the prestigious Food Refrigeration and Process Engineering Centre (FR
                                                                                                                               PB
 ra: More tools; Products; Factors; Equations and inequalities; Manipulation of formulae; Quadratic equations; Simultaneous equations; Indices and loga
                                                                                                                               PNF
al and chemical analysis of Wiener’s polarity number; The wiener number: Some applications and new developments; A comparison between various to
                                                                                                                               TGXW
               Dr Jane Blunt is a materials engineer who spend several years at The Welding Institute (TWI) undertaking projects associated with a variety
                                                                                                                               KNJH
               This report is written by Nnamdi Anyadike, who has many years' experience of reporting and analysing the international metals markets an
                                                                                                                               KNJH
               This report is written by Nnamdi Anyadike, who has many years' experience of reporting and analysing the international metals markets an
                                                                                                                               KNJH
               This report is written by Nnamdi Anyadike, who has many years' experience of reporting and analysing the international metals markets an
                                                                                                                               KNJH
               This report is written by Nnamdi Anyadike, who has many years' experience of reporting and analysing the international metals markets an
               John H Mason, The Open University, UK                                                                           PB
               John D Renton, University of Oxford, UK                                                                         TNC
               V Valpuesta Universidad de Malaga, Spain                                                                        TDCT
               Daniel Martin, Glasgow University, UK                                                                           PBW
                                                                                                                               RNP
               Rodney R White is Professor of Geography and Director of the Institute for Environmental Studies at the University of Toronto.
                                                                                                                               TDCT
               Dr David Watson is formerly Head of Branch 4 of the Chemical Safety and Toxicology Division in the UK Food Standards Agency. He has writ
               Richard R Scorer, Imperial College, London University, UK                                                       RNP
 nd degree of tightness applications of fabric tightness; Conclusion; References; Appendices.                                  TDH
                                                                                                                               TDM
using vacuum technology; Secondary metallurgical processes not using vacuum technology; Cleanness of steel and slag management; Influence of ladle r
                                                                                                                               TDH
  formation and design of fabrics; Heat-setting and adhesive treatments; Basic rubber compounding and composite assembly; Assessment of adhesion; C
                                                                                                                               TDPH
and application properties; Chemistry of azo colorants; Chemistry and properties of metal-complex and mordant dyes; Chemistry of anthraquinoniod po
                                                                                                                                 TDCP
 lated service conditions; Accelerated tests; Parameters to monitor degradation; Prediction techniques; Limitations, pitfalls and uncertainties; Condition
                                                                                                                                 TDPH
ctants; Classification of dyeing and printing auxiliaries by function; Fluorescent brightening agents; Auxiliaries associated with main dye classes.
                                                                                                                                 TDH
 s – including DREF, ring, rotor, and worsted spinning; post-spinning systems and the effect of yarn hairiness in sizing, weaving, knitting and apparel man
                                                                                                                                 TDPH
                                                                                                                                 TDPH
d work; Inspection, measuring and testing – Inputs to correction; The ISO 9000 standard – A framework for good quality management; The road to total
on departments. It is the internationally recognised authority on textile terminology and is used world-wide in trademark TDH    registration, litigations and cus
                                                                                                                                 TDPH
entals