Docstoc

12492 Horizontal Louver Blinds

Document Sample
12492 Horizontal Louver Blinds Powered By Docstoc
					                                                                                                       EXHIBIT “F”

                                           Design Criteria Standard Specification

                                    SECTION 12492 – HORIZONTAL LOUVER BLINDS
PART 1 GENERAL
1.01 SECTION INCLUDES
    A.     Horizontal slat louver blinds and operating hardware.
1.02 PROJECT CONDITIONS
    A.     Take field measurements to determine sizes required and length of controls.
    B.     Vendor to determine type of mounting brackets needed and proper location for controls.
PART 2 PRODUCTS
2.01 MANUFACTURERS
    A.     Hunter Douglas Window Fashions; Product "Flexalum": www.hunterdouglas.com.
    B.     Levolor Home Fashions.; Product "Riviera": www.levolor.com.
2.02 BLINDS AND BLIND COMPONENTS
    A.     Blinds: Horizontal slat louvers hung from full-width headrail with full-width bottom rail; manual control of raising
           and lowering by cord with full range locking; blade angle adjustable by control wand.
    B.     Metal Slats: Spring tempered pre-finished aluminum; radiused slat corners, with manufacturing burrs removed.
           1. Width: 1 or 2 inch as indicated.
           2. Thickness: 0.006 inch.
           3. Color: "Alabaster".
    C.     Slat Support: Woven polypropylene cord, ladder configuration.
    D.     Head Rail: Pre-finished, formed aluminum box, with end caps; internally fitted with hardware, pulleys, and
           bearings for operation; same depth as width of slats
    E.     Bottom Rail: Pre-finished, formed aluminum with top side shaped to match slat curvature; with end caps. Color:
           Same as headrail.
    F.     Lift Cord: Braided nylon; continuous loop.
    G.     Control Wand: Extruded hollow plastic; round shape.
    H.     Length of Controls: Per industry standards and to comply with ADA regulations. All lift cords and control wands
           shall be of sufficient length to be accessible from a maximum of forty-eight inches (48") from the floor.
    I.     Valance shall be provided.
    J.     Accessory Hardware: Provide type recommended by blind manufacturer.

                                                      END OF SECTION




05/16/12                                                   12492 - 1                          HORIZONTAL LOUVER BLINDS

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:5
posted:5/16/2012
language:Latin
pages:1
fanzhongqing fanzhongqing http://
About