Docstoc

Book - GTU

Document Sample
Book - GTU Powered By Docstoc
					CompanyName          Semester SubjectName
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Engineering Graphics
Engineering-Degree   1   Computer Programming and Utilization
Engineering-Degree   1   Computer Programming and Utilization
Engineering-Degree   1   Computer Programming and Utilization
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   1   Communication Skills
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   MATHEMATICS II
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Workshop
Engineering-Degree   2   Workshop
Engineering-Degree   2   Workshop
Engineering-Degree   2   Workshop
SubjectCode Sequence Heading
      110008        1 Review of limits, continuity, differentiability
      110008        2 Mean value theorem, Taylors Theorem, Maxima and Minima
      110008        3 Riemann integrals, Fundamental theorem of Calculus, Improper integrals, applications to area, vo
      110008        4 Convergence of sequences and series, power series
      110008        5 Partial Derivatives, gradient and directional derivatives, chain rule, maxima and minima, Lagrange
      110008        6 Double and Triple integration, Jacobians and change of variables formula
      110008        7 Parametrization of curves and surfaces, vector Fields, line and surface integrals
      110008        8 Divergence and curl, Theorems of Green, Gauss, and Stokes
      110001        1 Water Technology
      110001        2 Metals and alloys
      110001        3 Corrosion and its inhibition
      110001        4 Fuels and Combustion
      110001        5 Lubricants
      110001        6 Cements
      110001        7 Polymers and Plastics
      110001        8 Multidisciplinary nature of Environment Study
      110001        9 Natural and Synthetic Fibers
      110001       10 Chemical aspect of Biotechnology
      110001       11 Protective Coatings
      110001       12 Renewable and Non-renewable energy of sources
      110001       13 Refractories, Abrasives and Insulators
      110001       14 Analytical Techniques
      110011        1 Architectural Acoustics
      110011        2 Ultrasonic
      110011        3 Crystal Physics
      110011        4 Band theory of Solids
      110011        5 LASERS
      110011        6 Optical
      110011        7 Conducting Materials
      110011        8 Super Conducting Materials
      110011        9 New Engineering Materials
      110011       10 Non-Destructive Testing
      110010        1 Introduction
      110010        2 Fundamentals of Statics
      110010        3 Truss
      110010        4 Distributed forces, center of gravity and moment of inertia
      110010        5 Friction
      110010        6 Simple Machines
      110010        7 Physical & Mechanical properties of structural materials
      110010        8 Simple stresses & strains
      110010        9 Beam
      110010       10 Stresses in beams
      110010       11 Principal stresses and strains
      110013        1 Introduction
      110013        2 Engineering Curves
      110013        3 Loci of Points
110013    4   Projections of Points & Lines
110013    5   Projections of Planes
110013    6   Projections of Solids & Section of Solids
110013    7   Development of Lateral Surfaces
110013    8   Orthographic Projections
110013    9   Isometric Projections and Isometric View or Drawing
110003    1   Introduction to Computer & Programming
110003    2   Introduction to C Language
110003    3   Introduction to C++ language
110002    1   Communication skills
110002    2   Verbal and non-verbal communication (kinesics)
110002    3   Listening skills
110002    4   Effective presentation strategies
110002    5   Interviews
110002    6   Group Discussions
110002    7   Paragraph Development
110002    8   Letter - Writing
110002    9   Technical reports
110002   10   Technical Proposals
110002   11   Technical Descriptions
110002   12   Effective Reading Skills
110002   13   Job application
110002   14   Grammar and Vocabulary
110009    1   Vectors in R^n
110009    2   Vector spaces
110009    3   System of linear equations
110009    4   Linear Transformations
110009    5   Inner Product Spaces
110009    6   Eigen values and Eigen vectors
110004    1   Scope of Civil Engineering
110004    2   Surveying
110004    3   Construction Materials
110004    4   Elements of Building Construction
110004    5   Water Resources Development
110004    6   Transportation Engineering
110005    1   D.C. Circuits
110005    2   Electrostatics & Capacitance
110005    3   Electromagnetics
110005    4   Single Phase A.C. Circuits
110005    5   Polyphase Circuits
110005    6   Batteries, Cables
110005    7   Electrical Wiring
110005    8   Illumination
110005    9   Safety & protection
110006    1   Introduction
110006    2   Fuels and Combustion
110006    3   Properties of gases
110006    4   Properties of Steam
110006    5   Heat Engines
110006    6   Steam Boilers
110006    7   Internal Combustion Engines
110006    8   Speed Control
110006    9   Pumps
110006   10   Air Compressors
110006   11   Refrigeration & Air Conditioning
110006   12   Couplings, Clutches and Brakes
110006   13   Transmission of Motion and Power
110006   14   Important Engineering Materials
110007    1   Introduction to Environment, Ecology and Ecosystem
110007    2   Ecology & Ecosystems
110007    3   Population & Natural Resources
110007    4   Environmental Pollution
110012    1   Objectives
110012    2   Demonstration
110012    3   Making Jobs
110012    4   Journal is to be prepared
              SubjectContent

xima and Minima
f Calculus, Improper integrals, applications to area, volume

 derivatives, chain rule, maxima and minima, Lagrange multipliers
d change of variables formula
 or Fields, line and surface integrals
auss, and Stokes
               Introduction, sources of water Impurities in water, hard and soft water, Degree of hardness, Types of hardness, Scale and slud
               Introduction, Physical properties of metals, cast iron, wrought iron, steel, Heat treatment of steel. Definition of alloy, purpose
               Introduction, Theories of corrosion, Types of corrosion, Protection of metals from corrosion – organic and inorganic materials
               Definition, types of fuel – solids, liquids, gaseous and Nucleon fuels. Calorifio Value, Characteristics of good fuel. Solid fuels –
               Definition : Types of lubrication, classification of lubricants and their properties. Functions of lubricants.
               Introduction Manufacturing of Lime, Gypsum and Cement and their properties. Manufacturing of Portland cement, chemical
               Introduction, Definition of Polymer. Types of Polymers, Types of Polymerization reactions and their mechanism. Plastics, Clas
               Introduction, Nature of environment and its problem due to over utilization of natural sources. Environmental degradation G
               Introduction Definition of Fiber, Types of fibers – Natural, semi synthetic, synthetic fibers. Physical properties of fibers. Essen
               Definition, Benefits through biotechnology – Agriculture, Food quality, Medicines etc. Fermentation, Fermentation processes
               Introduction, Types of protective coatings – metallic, chemical, organic, electroplating. Paints and varnishes – Ingredients, pro
               Resources of energy, Appraisal resources problems, classification of Natural and renewable resources. Destruction and Conse
               Definitions of refractories, Abrasives and insulators. Properties of refractories. Classification of refractories. Classification, pro
               Introduction Types of analysis – Physical, Chemical and instrumentation. Physical analysis – Specific gravity, Melting point, Bo
               Classification of Sound : Loudness – Weber – Fechner law Decibel – Absorption Coefficient – Reverberation – Saline’s formula
               Introduction, production, properties and detection of ultrasonics. Determination of velocity and application of ultrasonic in E
               Introduction and classification of solids-crystal structure – The crystal systems and Bravias Lattice – Space Lattices of cubic sys
               Based theory of Solids – Classification of solids – Energy band structure of conductors, insulator and semi conductions types o
               Introduction and properties of Lasers, Stimulated and instantaneous emersion – Relation between Ecienstein’s ‘A’ and ‘B’ Coe
               Fibre Communication Introduction – Fibre – Optic System – advantages of Fibre optics – Basic principle – Acceptance angle an
               Introduction – conduction in Metals, Electron theory Q.M. treatment – Free electrode theory of metals – Electrical Conductiv
               Introduction to super conductor – properties of super conductor Type I and Type II super conductor – Comparision between I
               Introduction – Metallic glasses, types, properties, preparation and its application – Introduction to nano technology – method
               Introduction – The objective of NDT – Types of Defects – Methods of NDT (Liquid Penetrate – Dye Penetrate Radiographic) x X
               Scalar and Vector Quantities, composition and resolution of vectors, system of units, definition of space, time, particle, rigid b
               Principles of statics, coplanar, concurrent and non-concurrent, parallel and non-parallel forces, composition and resolution of
               Simple determinate plane trusses and analysis for member forces using methods of joints and methods of sections.
               Center of gravity of lines, plane areas, volumes and bodies, Pappus – Guldinus theorems, moment of inertia, polar moment o
               Theory of friction, static and sliding friction, laws of friction, angle and coefficient of friction, inclined plane friction, ladder fric
               Velocity ratio, mechanical advantage, efficiency, reversibility of machines, simple machines such as levers, pulley and pulley b
               Properties related to axial, bending, and torsional & shear loading, Toughness, hardness, proof stress, factor of safety, workin
               Elastic, homogeneous, isotropic materials; limits of elasticity and proportionality, yield limit, ultimate strength, strain hardeni
               (a) Types of loads, Types of supports, Types of beams, Support reactions for statically determinate beams (b) Bending momen
               Theory of simple bending, bending stresses and their distribution, moment of resistance, modulus of sections, distribution of
               Compound stresses, analysis of principal planes and principal stresses, principal strains, angle of obliquity of resultant stress,
               Introduction to Engineering Graphics, Drawing instruments and accessories, BIS - SP 46. Use of plane scales and Representativ
               Classification of Engineering Curves, Construction of Conics, Cycloidal Curves, Involutes and Spirals.
               Path of the points moving on simple arrangements and simple mechanisms, slider crank mechanism, four bar chain mechanis
Introduction to principal planes of projections, Projections of the points located in same quadrant and different quadrants, Pr
Concept of different planes, Projections of planes with its inclination to one reference plane and with two reference planes. C
Classification of solids. Projections of solids like Cylinder, Cone, Pyramid and Prism with its inclination to one reference plane
Concept of development of the different surfaces. Parallel Line Development and Radial Line Development.
Principle of projection, Principal planes of projection, Projections from the pictorial view of the object on the principal planes
Isometric Scale, Conversion of orthographic views into isometric projection, isometric view or drawing.
Introduction, Basic block Diagram and functions of various components of computer. Concept of Hardware and Software. Con
I Fundamentals of ‘C’: Data types in ‘C’. Operators and their hierarchy, Concept of header files, I/O functions, control structur
(I) Principles of object oriented programming, Comparison with procedural languages, Tokens, expressions and control struct
Process, types and levels of communication. Technical Communication and General Communication. Factors to be considered
Components of Non-verbal Communication (Kinesics) Barriers to effective communication. (Noise in oral and written commu
Types of Listening Active Listening V/s Passive Listening Empathetic Listening. Traits of a good listener, barriers in effective lis
Defining purpose, analysis of audience and locate, organizing contents. Preparing an outline of the presentation. Visual aids, n
Introduction, General preparations for an interview, Types of questions generally asked at the interviews. Types of interviews
Introduction, Group discussions as a part of the selection process, guidelines for group discussion. Role functions in group dis
Paragraph Development, Introduction, Topic sentence and supporting sentences. Attributes of a good paragraph. Types of pa
Business Letters, Structure and types of a business letter, Letter of Inquiry, Letters of complaint, regret and adjustment.
Introduction, types of reports, structure of reports, objectives and characteristics of reports.
Definition, Purpose, Types, Characteristics, Structure, Style and appearance.
Introduction, Definition of an object or a process. Guidelines for writing good description - organization, content, structure.
Purpose of reading, skimming and scanning. Tips for improving comprehension skills.
Essential parts - Cover Letter and the ‘resume’. Types of ‘resumes’ (Curriculum Vitae) Chronological ‘resume’, functional ‘resu
Tense and the concept of Time. Passive Voice, Conditionals Prepositions, Concord. Idioms, Confusables, one-word substitutes
(I) Properties of R^n (II) Dot product, Norm and Distance properties in R^n (III) Pythagorean theorem in R^n
(I) Definition & Examples (II) Vector Subspaces of R^n (III) Linear Independence and dependence (IV) Linear Span of set of vec
(I) Matrices (a) Definition and Algebra of matrices (b) Types of Matrices (II) Methods to solve System of linear equations (a) G
(I) Definition and Basic properties (II) Types of Linear Transformations (Rotation, reflection, expansion, contraction, shear, pro
(I) Definition and properties (II) Angle and orthogonal basis, Orthogonormality of basis (III) Gram Schmidt’s Orthogonalisation
(I) (a) Definition (b) Characteristic Polynomials (II) Eigen values of Orthogonal , symmetric, skew symmetric, Hermitian , skew
Introduction: Impact of Infrastructural Development on the Economy of a Country, Role of Civil Engineers, Importance of Plan
Introduction: Surveying and levelling, Object and uses, Primary divisions, Fundamental principles, Classification of surveying, P
Requirement, types, uses, properties and importance of Civil Engineering materials like Stone, Bricks, Lime, Cement, Ferrous
Planning: Elementary principles and basic requirements of a building planning, layout of residential & industrial buildings. Con
Elementary Hydrology, Sources of water, Watershed Development, water requirements and its conservation, Hydraulic Struc
Role of Transportation in National development, Transportation Ways, Surface Transportation and Aviation, Elements of High
Effect Of Temperature Upon Resistance, Solutions Of series, parallel in brief, star-delta combination of Resistances, KVL & KC
Definitions of Electrostatic, types of capacitors, series, parallel combinations & related circuit calculations in brief charging &
Magnetic Circuit , Comparison Between Electric And Magnetic Circuits , Series/Parallel Magnetic Circuit Calculations , Magnet
Generation Of Alternating Voltages & Currents, Their Equations, Definitions , R.M.S. And Average Values , Vector Representat
Generation Of Polyphase Voltages , 3,Phase System , Phase Sequence, Inter Connection Of 3 Phases , Voltage, Current And Po
Battery, life of batteries, charging & discharging of battery. Cables, 2, 21/2, 3 and 4 core armored & unarmored cables.
Connectors & switches, system of wiring, domestic wiring installation, sub circuits in domestic wiring, simple control circuit in
Types of lamps, fixtures & reflectors, illumination schemes for domestic, industrial & commercial premises, Lumen requireme
Safety, electric shock, first aid for electric shock other hazards of electrical laboratories & safety rules, use of multimeters, gro
Prime movers, Sources of energy, Types of prime movers, Force and mass, Pressure, Work, Power, Energy, Heat, Temperatur
Introduction, Classification, Solid fuels, Liquid Fuels, Gaseous fuels, LPG,CNG and biofuels ,Calorific values.
Gas laws, Boyle's law, Charle's law, Combined gas law, Gas constant, Internal energy, Relation between Cp and Cv, Enthalpy, N
Introduction, Steam formation, Types of Steam, Enthalpy, Specific volume of steam and dryness fraction of steam , Internal e
Thermal prime movers, Elementary heat engines, Sources of heat, Working substances, Converting machines, Classification o
Introduction, Classification, Simple vertical boiler, Vertical multitubular boiler, Cochran type, Lancashire boiler, Locomotive bo
Introduction, Classification, Engine details, otto four-stroke cycle, Diesel-four-stroke cycle, Difference between otto cycle and
Introduction, Governors, I.C. Engine governing, Fly wheel.
Introduction, Reciprocating pump, types and operation, Bucket pump, Air Chamber, Centrifugal pumps, Types and Priming, R
Introduction, Uses of Compressed air, Reciprocating compressors, Operation of a compressor, Work for compression, Power
Introduction, Refrigerant, Types of refrigerators, Vapour compression refrigerating system, Window and split air conditioners
Introduction, Couplings, Clutches, Brakes, Types of brakes. Difference between a brake and a clutch.
Introduction, Methods of drive, Power transmission elements, shaft and axle, Belt-drive, Pulleys, Power transmitted by a belt
Properties of materials, Ferrous & Nonferrous materials and other important engineering materials such as Timber, Abrasive
Definition and Inter-relationships amongst and between them Components of Environment, Relationship between different c
Introduction: Ecology- Objectives and Classification Concepts of an ecosystem- structure & function of ecosystem Componen
Development of Habitation patterns and Environmental factors governing human settlement Population & Pollution , Reason
Types of Environmental Pollution Water Pollution : Introduction – Water Quality Standards , Sources of Water Pollution, Class
Exposure to Industrial environment, work culture, hand tools and general purpose machine. Developing Creativity, Craft man
Demonstration of Hand tools, Power tools, Machine tools, Processes, Materials, Marking, and Measurement in following sho
Making Jobs in Fitting, Carpentry, Smithy, Tin smithy and Welding shops
Journal is to be prepared covering the topics of demonstration and Report about Process / Methodology / Inspection for mak
hardness, Scale and sludge formation in boiler Boiler corrosion. Caustic embrittlements, Priming and Foaming, Softening of water. Potable
inition of alloy, purpose of making alloys. Classification of alloys. Alloys of steel and its applications. Non-Ferrous alloys and its industrial a
and inorganic materials, Inhibitors, Cathodic protection.
good fuel. Solid fuels – coal, coke. Analysis of coal – ultimate and proximate Liquid fuel – Petroleum. Refining of Petroleum by Fractional d

 land cement, chemical composition of cement chemical constituents of Portland cement, Setting and hardening of cement.
 echanism. Plastics, Classification of plastics – Thermo plastics and Thermo setting plastics. Molding constituents of plastics Engineering pr
 nmental degradation Green house effect, acid rain, Ozone depletion, Photochemical smog. Environmental problems in India, Environmen
 perties of fibers. Essential requirement for fiber for formation. Preparation, properties and uses of Cellulose acetic, Viscose Rayon, Nylon
 ermentation processes, Enzymes and its application in industries. Bio fuels and Bio membrane.
nishes – Ingredients, properties and uses, Enamels, Lacquers etc.
  Destruction and Conservation.
 ories. Classification, properties and uses of abrasives. Classification, properties and uses of Insulators.
 avity, Melting point, Boiling point, Crystallization. Purification of compounds etc. Chemical analysis – Quantitative and Qualitative analysis
 ation – Saline’s formula – Factors affecting acoustics of buildings and their remedies.
cation of ultrasonic in Engineering.
 ace Lattices of cubic systems – Miller Indices – Relation between Interplanner Distance and cubic Edge and Laws Formula.
emi conductions types of diodes (simple diode, Zener diode, varactor diode, LED Solar cells, photovoltaic cell, Photo Conductivity, Hall effe
 enstein’s ‘A’ and ‘B’ Coefficients-Population Inversion – Optical – Pumping – Nd-Yag Laser and CO2 Laser – Application of Laser in Materia
e – Acceptance angle and Numerical Aperture – Types of optics preparation through optical fibre
 s – Electrical Conductivity – Thermal Conductivity – Wildemann – Franz law – Drawbacks of classical free electrode theory
 Comparision between I and II – High T conductors – Application
no technology – method of producing, properties and its application – shape memory alloys – types – shape Memory effect – Pseudo elas
 etrate Radiographic) x X-ray Radiography – X-ray Fluoroscopy – Ultrasonic Inspection method – Pulse Echo System – Visual Display units.
ce, time, particle, rigid body, force.
 sition and resolution of forces, moments & couples - their properties, combination of coplanar couples and forces, equilibrant, equilibrium
ds of sections.
 nertia, polar moment of inertia & radius of gyration of areas, parallel & perpendicular axes theorems.
plane friction, ladder friction, wedges, belt and rope friction.
vers, pulley and pulley blocks, wheel and differential axle, Single purchase/double purchase crab, compound screw jacks.
 factor of safety, working stress, load factor.
strength, strain hardening, section of composite materials, prismatic and non-prismatic sections. Strains: Linear, shear, lateral, thermal an
ams (b) Bending moment and Shear force , Bending moment and shear force diagrams for statically determinate beams subjected to coup
 ections, distribution of shear stresses in different sections.
uity of resultant stress, principal stresses in beams.
 cales and Representative Fraction.

our bar chain mechanism etc.
 different quadrants, Projections of line with its inclination to one reference plane and with two reference planes. True length of the line
two reference planes. Concept of auxiliary plane method for projections of the plane.
to one reference plane and with two reference planes. Section of such solids and the true shape of the section.

 on the principal planes for View from Front, View from Top and View from Side using first angle projection method and third angle projec

ware and Software. Concept of basic types of software. Introduction to programming and programming languages. Flow charts and algori
 ctions, control structures in C, looping structures in C, arrays and strings. II Functions and recursion: Concepts of functions with various ty
sions and control structures Introduction to functions, classes, objects, constructors, destructors in C++. (II) Classes and Objects: Declaring
 actors to be considered in technical communication.
 ral and written communication) Communication across cultures.
  barriers in effective listening, Tips for effective listening.
 sentation. Visual aids, nuances of delivery, Body language and effective presentation.
 ws. Types of interviews, Importance of nonverbal aspects.
e functions in group discussion.
 paragraph. Types of paragraphs.
t and adjustment.


 n, content, structure.

esume’, functional ‘resume’.
s, one-word substitutes, homonyms, homophones eponyms.

inear Span of set of vectors (V) Basis of subspaces , Extension to Basis
 f linear equations (a) Gaussian Elimination (Row echelon form) (b) Gauss-Jordan method (Reduced row echelon form). (c) Inverse of matr
, contraction, shear, projection) (III) Matrix of Linear transformations (IV) Change of Basis and similarity (V) Rank Nullity Theorem ( Dimen
 idt’s Orthogonalisation process (IV) Projections theorem (V) Least squares approximations (linear system)
 etric, Hermitian , skew Hermitian, unitary, normal matrix (III) Algebraic and geometric multiplicity (IV) Diagonalisation by similarity transfo
eers, Importance of Planning, Scheduling and Construction Management.
sification of surveying, Plans and maps, Scales, Units of measure. Linear measurements: Methods, Instruments used in chaining; Chain sur
Lime, Cement, Ferrous and Non Ferrous Metals, Ceramic Materials, Timber, Sand, Aggregate, Mortar and Concrete, Paints and Varnishes,
 ndustrial buildings. Construction: Classification of buildings based upon occupancy and structure, Design Loads, Common building compo
rvation, Hydraulic Structures of Storage, Water Conveyance System: Canals; Water Conduits.
 ation, Elements of Highway materials properties and highway construction, BOT Projects for Highways, Elements of Traffic Engineering an
f Resistances, KVL & KCL.
 ons in brief charging & discharging of capacitor. Energy stored in capacitor.
 t Calculations , Magnetic Hysteresis, Hysteresis And Eddy Current Loss, Magnetic Materials, Electromagnetic induction, Statically And Dyn
 es , Vector Representation Of Alternating Quantities , Addition And Subtraction Of Vectors , Complex Algebra., Phasor Relations Between
Voltage, Current And Power Relationships In Balanced Three Phase Circuits , Power Measurement In Single Phase And 3 Phase Circuits.
narmored cables.
 simple control circuit in domestic installation, industrial electrification.
mises, Lumen requirements for different categories.
  use of multimeters, grounding, importance of grounding, equipment of grounding for safety. Circuit protection devices, fuses, MCB, ELCB
ergy, Heat, Temperature, Units of heat, Specific heat capacity, Interchange of heat, Change of state, Mechanical equivalent of heat, Intern

 n Cp and Cv, Enthalpy, Non flow process, Constant volume process, Constant pressure process, Isothermal process, Poly-tropic process, A
on of steam , Internal energy, Steam tables, Non-flow process. Measurement of dryness fraction, Throttling calorimeter, Separating calori
achines, Classification of heat engines, Heat engine cycles, Carnot cycle, , Rankine cycle, Ottocycle, Diesel cycle.
re boiler, Locomotive boiler, Babcock and Wilcox boiler, High pressure boilers, Boiler details, Boiler performance. Functioning of different
between otto cycle and Diesel cycle, Two-stroke cycle, Difference between two-stroke and four-stroke cycle, indicated power (ip), Brake P

s, Types and Priming, Rotary pumps.
or compression, Power required, Reciprocating compressor efficiency, Multistage reciprocating compressors, Rotary compressors.
nd split air conditioners.

er transmitted by a belt, Chain drive, Friction drive, Gear drive
 ch as Timber, Abrasive material, silica, ceramics, glass, graphite, diamond, plastic, polymer and composite material
 hip between different components Man-Environment relationship Impact of Technology on the environment Environmental Degradation
  ecosystem Components of ecosystem- Producers, Consumers, Decomposers Bio-Geo- Chemical Cycles- Hydrological Cycle, carbon cycle,
 on & Pollution , Reasons for overpopulation ,Population Growth, Demographic Projections and Population Structures ,Production of food
of Water Pollution, Classification of water pollutants, Effects of water pollutants , Eutrophication Gujarat Technological University. B.E Sem
ng Creativity, Craft man skill, approach to work and Planning capability
 ement in following shops:Carpentry, Pattern making, Foundry, Fitting, Smithy, Welding, Tin smithy,Plumbing, Machine shop and Electropl

 gy / Inspection for making jobs.
aming, Softening of water. Potable water, Break point of chlorination, Desalination of Brackish water etc.
 -Ferrous alloys and its industrial applications.

 ining of Petroleum by Fractional distillation. Gaseous fuel – coal-gas, bio gas produces gas and water gas. L.P.G. & CNG.

ardening of cement.
 tituents of plastics Engineering properties and uses of plastics. Definition of Rubber, Types of Rubber, Vulcanization of rubber. Application
 tal problems in India, Environment management and laws. Public awareness.
ulose acetic, Viscose Rayon, Nylon, Polyesters acrylic, Glass fibers etc. Differentiate between wool and silk fibers. Spinning processes – Me




antitative and Qualitative analysis of organic and inorganic compounds. Instrumental analysis – Spectroscopic, Chromatographic PH meas


and Laws Formula.
c cell, Photo Conductivity, Hall effects.
r – Application of Laser in Material Processing – Holography – Application of Lasers

e electrode theory

ape Memory effect – Pseudo elasticity – properties – application – Bio-materials – General information – Biomedical compatibly of Ti-Al-N
ho System – Visual Display units.

and forces, equilibrant, equilibrium, free body diagrams, analytical conditions of equilibrium for coplanar force systems.




 und screw jacks.

: Linear, shear, lateral, thermal and volumetric, Poisson’s ratio. Stresses: Normal stresses, axial – tensile & compressive, shear and comple
rminate beams subjected to couples, concentrated forces, uniformly distributed loadings, relation between bending moment, shear force
 ce planes. True length of the line and its inclination with the reference planes.




 ion method and third angle projection method, Full Sectional View.

  languages. Flow charts and algorithms.
ncepts of functions with various types of parameters. Various types of parameter passing mechanisms. Recursive functions and implemen
 (II) Classes and Objects: Declaring classes, defining member functions, Making an outside function inline, nesting of member functions, pr




 echelon form). (c) Inverse of matrices (i) By Gauss-Jordan method (ii) By Determinant method (d) Rank of Matrix (iii) By Row Echelon form
 (V) Rank Nullity Theorem ( Dimension Theorem )

 iagonalisation by similarity transformation (V) Spectral theorem for real symmetric matrices (VI) Application to Quadratic forms

uments used in chaining; Chain surveying, Ranging; Obstacles; Errors in chaining, Tape corrections, Conventional symbols Compass surveyi
d Concrete, Paints and Varnishes, Glass , Plastic, Conducting, Magnetic, and Miscellaneous Materials.
n Loads, Common building components, their functions, and nominal dimensions. Elements of building drawing. Introduction to building b

 Elements of Traffic Engineering and Traffic Control.


netic induction, Statically And Dynamically Induced E.M.F.S in brief, Fleming's Right hand rule-Left hand rule, Coefficients Of Self And Mut
gebra., Phasor Relations Between Voltage And Current In Each Of Resistance, Inductance And Capacitance , A.C. Series And Parallel Circuit
gle Phase And 3 Phase Circuits.




otection devices, fuses, MCB, ELCB & relays.
chanical equivalent of heat, Internal energy, Enthalpy,Entropy,Efficiency, Statements of Zeroth Law, First law and Second Law of Thermod

mal process, Poly-tropic process, Adiabatic process.
 ling calorimeter, Separating calorimeter, Combined calorimeter.

ormance. Functioning of different mountings and accessories.
 ycle, indicated power (ip), Brake Power (bp),Efficiencies.


 sors, Rotary compressors.




 ment Environmental Degradation
  Hydrological Cycle, carbon cycle, Oxygen Cycle, Nitrogen Cycle, Sulfur Cycle Energy Flow in Ecosystem Food Chains: Grazing, Detritus, & F
 on Structures ,Production of food Renewable & Nonrenewable Resources: Renewable Resources, Nonrenewable Resources, Destruction
 Technological University. B.E Sem II 8 Air Pollution : Composition of air , Structure of atmosphere, Ambient Air Quality Standards, Classifi

mbing, Machine shop and Electroplating.
s. L.P.G. & CNG.


ulcanization of rubber. Application of Rubber.

lk fibers. Spinning processes – Melt and Wet spinning.




scopic, Chromatographic PH measurement, Conductinity, Turbidity etc. • The topics No. 12, 13 and 14 are to be taught during practical ho




– Biomedical compatibly of Ti-Al-Nb alloys for implant application.


r force systems.




& compressive, shear and complementary shear, thermal and hoop,. Applications to composite material stepped & tapered bars.
een bending moment, shear force and rate of loading, point of contraflexure.
 ecursive functions and implementation of these concepts in ‘C’. III Pointers and structures: Concepts of pointers and simple programs usi
e, nesting of member functions, private member functions, Arrays with in a class, Memory allocation of objects, static data members, stat




of Matrix (iii) By Row Echelon form (iv) In terms of Determinant (v) By row space and column space


 tion to Quadratic forms

entional symbols Compass surveying: Types and uses of compass, Bearings, Whole Circle Bearings, and Reduced Bearings, Computation of

drawing. Introduction to building byelaws.




rule, Coefficients Of Self And Mutual Inductances , Coefficient Of Coupling, Series/Parallel Combinations Of Inductances, Rise And Decay O
ce , A.C. Series And Parallel Circuits , Power And Power Factor , Methods Of Circuit Solution (Analytically & Vectorially), Resonance In Serie




t law and Second Law of Thermodynamics.
Food Chains: Grazing, Detritus, & Food webs Ecological Pyramids Major Ecosystems: Forest Ecosystem, Grassland Ecosystem, Desert Ecosy
enewable Resources, Destruction versus Conservation Water Resources: Water Resources-Indian Scenario, Water Sources- Surface & Grou
 ent Air Quality Standards, Classification of air pollutants, Sources of common air pollutants like SPM, SO2, NOX – Natural & Anthropogeni
re to be taught during practical hours as a part of tutorial.




al stepped & tapered bars.
pointers and simple programs using pointers. Introduction to simple structure and its implementations.
objects, static data members, static member functions, arrays of objects, objects as function arguments, friend function, returning of obje




Reduced Bearings, Computation of angles; Meridians; declinations and dip of needle; Local attraction; Chain and compass surveying field w




 Of Inductances, Rise And Decay Of Current In Inductive Circuits , Force Experienced By Current Carrying Conductor Placed In Magnetic Fie
 & Vectorially), Resonance In Series And Parallel Circuits.
Grassland Ecosystem, Desert Ecosystem, Aquatic Ecosystem, Estuarine Ecosystem
 io, Water Sources- Surface & Ground Water Sources, Uses & overuses of water resources, problems due to Overexploitation of Water Re
O2, NOX – Natural & Anthropogenic Sources, Effects of common air pollutants Land & Noise Pollution : Introduction- Lithosphere, Land Us
 friend function, returning of objects, const member function.




hain and compass surveying field work. Elevation measurements: Levelling, object and uses, terms used in levelling, levelling instruments,




 Conductor Placed In Magnetic Field.
e to Overexploitation of Water Resources Forest Resources : Forest Resources - Indian Scenario , Importance of forests- Ecologically & Eco
ntroduction- Lithosphere, Land Uses, Causes of land Degradation, Sources of Noise Pollution, Effects of noise pollution Current Environme
in levelling, levelling instruments, methods of levelling, recording and methods of reducing, errors in levelling, contours; characteristics an
ance of forests- Ecologically & Economically, Uses of forest products, Forest Types, Deforestations-Causes and effects, Forest Degradation
oise pollution Current Environmental Global Issues : Global Warming & Green Houses Effects, Acid Rain , Depletion of Ozone Layer
elling, contours; characteristics and applications. Areas and volumes; use of a Planimeter. Modern Tools of Surveying and Mapping: Introd
es and effects, Forest Degradation in India Energy Resources : Energy Resources - Indian Scenario , Conventional Energy Sources & its prob
 , Depletion of Ozone Layer
s of Surveying and Mapping: Introduction to Theodolite, Electronic Distance Measurement Instruments, Total Station, Global Positioning S
entional Energy Sources & its problems, non-conventional energy sources-Advantages & its limitations , Problems due to Overexploitation
Total Station, Global Positioning System, Remote Sensing and Geographic Information System.
Problems due to Overexploitation of Energy Resources
CompanyName          Semester SubjectName
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Mathematics-I
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Chemistry
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 Physics
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 MECHANICS OF SOLIDS
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Engineering Graphics
Engineering-Degree           1 Computer Programming and Utilization
Engineering-Degree           1 Computer Programming and Utilization
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           1 Communication Skills
Engineering-Degree           2 MATHEMATICS II
Engineering-Degree           2 MATHEMATICS II
Engineering-Degree           2 MATHEMATICS II
Engineering-Degree           2 MATHEMATICS II
Engineering-Degree           2 Elements Of Civil Engineering
Engineering-Degree           2 Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements Of Civil Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements of Electrical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Elements Of Mechanical Engineering
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Basics of Environmental Studies
Engineering-Degree   2   Workshop
Engineering-Degree   2   Workshop
Engineering-Degree   2   Workshop
SubjectCode Sequence BookTitle
      110008        1 Calculus - Single and Multivariable
      110008        2 Calculus
      110008        3 Calculus, Volumes 1 and 2
      110008        4 Calculus and Analytic Geometry
      110001        1 Engineering Chemistry
      110001        2 Engineering Chemistry
      110001        3 Engineering Chemistry
      110001        4 Engineering Chemistry
      110001        5 Engineering Chemistry
      110001        6 Environmental Science
      110001        7 Environmental Studies and Disaster Management
      110001        8 Engineering Chemistry
      110011        1 Engineering Physics
      110011        2 Engg. Physics
      110011        3 A Text book of Engg. Physics
      110011        4 Engg. Physics
      110010        1 Engineering Mechanics (Statics)
      110010        2 Applied Mechanics
      110010        3 Mechanics of Structure Vol. I
      110010        4 Mechanics of Materials
      110013        1 A Text Book of Engineering Graphics
      110013        2 A Text Book of Machine Drawing
      110013        3 Elementary Engineering Drawing
      110013        4 Geometrical and Machine Drawing
      110013        5 Engineering Graphics – I and II
      110013        6 Engineering Drawing & Graphics using Auto CAD 2000
      110013        7 A text book of Engineering Drawing
      110013        8 A text book of Engineering Drawing
      110013        9 Engineering Drawing with an Introduction to AutoCAD
      110013       10 Computer Aided Engineering Drawing
      110003        1 Programming in ANSI C
      110003        2 Object oriented programming with C++
      110002        1 Technical Communication Principles and Practice
      110002        2 Personality Development
      110002        3 Basic Communication Skills for Technology
      110002        4 Communication Skills for Technical Students
      110002        5 Textbook of English for Engineers and Technologists
      110002        6 Communication Skills for Engineers
      110002        7 English for Technical Communication
      110002        8 Basics of Management and Communication Skills
      110002        9 Business Communication Strategies
      110002       10 Body Language
      110002       11 A Communicative Grammar of English
      110009        1 Elementary linear algebra with applications
      110009        2 Linear Algebra and its applications
      110009        3 Advanced Engineering mathematics
      110009        4 Linear Algebra – A Geometric approach
      110004        1 Surveying Vol .I & II
      110004        2 Surveying Vol. I and II
110004   3   Civil Engg. Drawing
110004   4   Building Construction
110004   5   Engineering Material
110004   6   Building Materials
110004   7   Civil Engineering Material
110004   8   Highway Engineering
110004   9   Irrigation Engineering and Hydraulic Structures
110005   1   Electrical Technology Vol.1
110005   2   Basic Electrical Engineering
110005   3   Electrical Estimating & costing
110006   1   Elements of Mechanical Engineering
110006   2   Introduction to Engineering Materials
110006   3   Thermal Science and Engineering
110006   4   Fundamental of Mechanical Engineering
110006   5   Thermal Engineering
110007   1   Environmental Studies
110007   2   Environmental Pollution: Causes, Effects & Control
110007   3   Environmental Science
110007   4   Environmental Science
110007   5   Environmental Engineering & Management
110007   6   Environmental Management
110007   7   Environment & Ecology
110007   8   Introduction To Environmental Engineering and Science
110012   1   Elements of Workshop Technology
110012   2   Workshop Technology Vol. I & II
110012   3   Workshop Technology
AuthorName
Hughes-Hallett et al.
James Stewart
T. M. Apostol
G. B. Thomas and R. L. Finney

Dr. O.P. Agrawal
N. Krishnamurthy, P. Vallinaygam and D. Madhavan
R. Gopalan, D. Venkappaya and Sulochana Nagarjan
C. Parameswara Murthy, C.V. Agrawal and Andra Naidu
Y. Anjaneyulu
S.G. Shah, S.G. Shah and Gopal N.Shah
B. Sivsankar
K. Rajagopal
G. Vijayakumari
M.N. Aavadhalula, P .G. Kshirsagar
Abhijit Nayak
Beer and Johnston
S. B. Junnarkar & H. J. Shah
S. B. Junnarkar & H. J. Shah
Beer and Johnston
P.J.Shah
P.J.Shah
N.D.Bhatt
N.D.Bhatt
Arunoday Kumar
T. Jeyapoovan
R.K.Dhawan
P.S.Gill
D.A.Jolhe
S. Trymbaka Murthy
Balagurusamy E
Balagurusamy E
Meenakshi Raman, Sangeeta Sharma (OUP)
Harold Wallace and Ann Masters
Andrea J. Rutherford
T.M. Farhathullah
Humanities & Social Sciences Division, Anna University, Chennai
Sunita Mishra, C, Murali Krishna
K.R. Lakshminarayanan
Dr. P.C. Shejwalkar
Matthukutty M. Monippally
Allan Pease
Geoffrey Leech, Jan Swartvik
H. Anton
G. Strang
E. Kreyszig
S. Kumaresan
Dr. B. C. Punamia
S. K. Duggal
S. C. Rangwala
Dr. B. C. Punamia
Dr. S.C. Rangwala
Dr. S. .K. Duggal
Jakson and Dhir
Khanna S. K. and Justo C. E.G.
Santoshkumar Garg
B.L.Theraja
V.N.Mittal
Surjitsingh
K.P.Roy and Prof.S.K . Hajra Chaudhary
B.K. Agrawal
Dr. D.S. Kumar
G.S. Sawhney
R.K. Rajput
R. Rajagopalan
K.C Agrawal
Richard T Wright & Bernard J Nebel
Daniel B Botkin & Edward A Keller
Suresh K Dameja
Dr. Swapan C Deb
Dr Gourkrishna Dasmohapatra
Master Gilbert M.
Choudhary, Hajara
Raghuvanshi B.S.
Chapman W.A. J and Arnold E.
Publisher                                                  BookType Edition     ISBN No
John-Wiley and Sons (2003)                                          3rd Edition
Thomson (2003)                                                      5th Edition
Wiley Eastern 1980                                                  2nd Edition

Jain and Jain Publisher Dhanpat Rai Publishing Co
Khanna Publishers Delhi
Publisher – Prentice – Hall of India Pvt. Ltd. New Delhi

B.S. Publication, Hyderabad – A.P.
B.S. Publishers, Hyderabad – A.P.

The M.C. Grawhill Companies, New Delhi
Prentice-Hall of India Pvt. Ltd., New Delhi
Vikas Publishing House Pvt. Ltd.
S. Chand
S.K. Kataria & Sons., Delhi




S.Chand & Company Ltd., New Delhi                          T
S.Chand & Company Ltd., New Delhi                          T
Charotar Publishing House, Anand                           T
Charotar Publishing House, Anand                           T
Tech – Max Publication, Pune
Vikas Publishing House Pvt. Ltd., New Delhi
S.Chand & Company Ltd., New Delhi
S.K.Kataria & sons, Delhi
Tata McGraw-Hill Publishing Co. Ltd., New Delhi
I.K.International Publishing House Pvt. Ltd., New Delhi
Tata McGraw-Hill Publishing Company limited                T         4th edition
Tata McGraw-Hill Publishing Company limited                T         3rd edition
Oxford University Press
Cengage Publishers
Pearson Education
Orient Longman
Orient Longman
Pearson Education
Scitech Publications, Chennai.
Everest Publishing House
Tata – McGraw – Hill
Sheldon Press, London
ELBS – with Longman
Wiley-India.(2008)                                                   9th Edition
Thomson.(2006)                                                       4th Edition
Wiley-India.(1999)                                                   8th Edition
Prentice Hall India (2006)
Laxmi Publication Delhi
Tata Macgraw hill Publication New Delhi
Charotar Pub. House Anand
Laxmi Pub. Delhi
Charotar Pub. House
New Age International Pub.House Delhi
ELBS Publishing London
Nemchand and Brothers
Khanna Publishers Delhi


Dhanpat Rai & Co.
Media Promoters and Publishers Pvt.Ltd.Bombat
Tata Mcgraw Hill Publication New Delhi
S.K. Kataria & sons Publication New Delhi
Prentice Hall of India Publication New Delhi
S.Chand Publication New Delhi
Oxford University Press




Media Promotors & Publishers, 1997
Dhanpat Rai & Sons 1998
Viva                                            low priced Student edition, 1998

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:435
posted:5/15/2012
language:Latin
pages:44
fanzhongqing fanzhongqing http://
About