DaVinci Decor - Monterey Changing Table

Document Sample
DaVinci Decor - Monterey Changing Table Powered By Docstoc
					Monterey Changer (M1302)- Assembly and Operation Manual
Congratulations on purchasing a Million Dollar Baby Product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our cribs are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship. DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

C. Top back rail

D. Top front rail

E. Shelf rails (4)

G. Safety strap A. Left panel B. Right panel H. Metal cross brace

Tools Needed (not included)

F. Shelf boards (3)

J. Changing pad

Phillips screwdriver

HARDWARE

K. 2” Allen head bolt (12)

L. Lock washer (12)

M. Barrel nut (12)

N. Allen wrench

O. Metal dowel (12)

V. 5/8” Round Head Screw (4)

revised 01-2007

STEP 1.
Insert a metal dowel (O) into each end of the top front (D) and back (C) rails and also the four shelf rails (E). Use the Allen head bolts (K) and washers (L) to attach the rails to the left panel (A).

A C E M K O

K O K O

M

STEP 2.
Be sure that the grooves in the rails face to the inside of the changer.

D K O O K K O M M E

STEP 3.
Turn the changer on its side and slide the shelf panels (F) into the grooves in the rails. Be sure the finished side faces the top of the changer

F

F

F

K&L STEP 4.
Place a barrel nut (M) into each rail end. Place the right panel (B) in position on the changer assembly and attach it with Allen head bolts and washers.

B

STEP 5.
Attach the metal cross brace (H) to the underside of the top shelf using two Phillips head screws (V).

STEP 6.
Attach the safety strap (G) to the front and rear top rails inside the changer using two Phillips head screws (V).

H

J V G

V

H

V


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:47
posted:9/25/2009
language:English
pages:3