Docstoc

Mikrotik Hotsot And Radius Setu

Document Sample
Mikrotik Hotsot And Radius Setu Powered By Docstoc
					Hotspot Setup

After logging into the router via WinBox, click on IP and then Hotspot to get to the Hotspot Setup dialog
box. From there go through the basic hotspot configuration. This involves setting up the IP addresses and
interfaces used by the router. Consult the MikroTik RouterOS documentation for details about this part of
the configuration.

When you're done, you should see something like the image to the right. From the Hotspot window:


    Click on the Profiles button
    Double click on hsprof1
    Check/enable the Use RADIUS checkbox
    Check/enable the Accounting checkbox
    Uncheck/disable the Interim Update checkbox
    Click on the Login tab
    Check/enable the HTTP PAP checkbox
    Click on General tab
    Check/enable the Hotspot Address checkbox and enter the LAN IP of the gateway
    Check/enable the DNS Name checkbox and enter the full host name of the gateway
    From the HTML Directory pulldown select "hotspot"
    Click on the OK button along the right side of the window

User Profile Configuration

If you're following along, clicking OK should have taken you back to the Hotspot Server Profiles window.
From there close that window and you'll be back at the Hotspot window. If you're not there, get there.
From the Hotspot window:

     Click on the Users tab
     Click on the Profiles button
     Remove any profiles other than default by selecting them and clicking on the - (minus sign) at the top
of the window
     Double click on the default profile
     Disable/uncheck the Session Timeout checkbox
     Make sure there is nothing selected in the Idle Timeout pulldown
     Make sure there is nothing selected in the Keepalive Timeout pulldown
     Click on the OK button along the right side of the window

Walled Garden Configuration

f you're following along, clicking OK should have taken you back to the Hotspot User Profiles window.
From there close that window and you'll be back at the Hotspot window. If you're not there, get there.
From the Hotspot window:

    Click on the Walled Garden tab
    Click on the + (plus sign) button
    In the Action radio buttons, select Allow
    In the Server pulldown, select "hotspot1"
    In the Dst. Host blank enter "*.wirelessorbit.com"
    In the "Dst. Port" blank enter "443"
    In a similar fashion, add the hostnames of any payment gateways you're using
    Click on the OK button along the right side of the window

RADIUS Configuration
If you're following along, clicking OK should have taken you back to the Hotspot window. From there,
select RADIUS from the left hand side of the screen. From the Radius window:

   Click on the + (plus sign) button
   Check/enable the Hotspot checkbox
   Uncheck/disable all the other service type checkboxes
   In the Address blank enter "69.36.234.20"
   In the Secret blank enter the secret key you defined in the RADIUS profile for this gateway (in the
Wireless Orbit Control Center). If you're not sure what that is, just check the gateway details in the
Gateways page of the Control Center.
   In the Authentication Port blank enter "1812"
   In the Accounting Port blank enter "1813"
   Click OK

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:4
posted:5/11/2012
language:
pages:2