DaVinci Decor - Anastasia Crib by DaVinciDecor

VIEWS: 156 PAGES: 8

									Anastasia Crib (M4801)- Assembly and Operation Manual
Congratulations on purchasing a Million Dollar Baby Product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our cribs are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship. DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

E. Rail (2)

F. Spring Frame

I. Glide Support (2) A. Left Headboard B. Right Headboard L. Drawer Back

O. Base (4)

M. Left Drawer Side

Tools Needed (not included)

C. Stationary Side

N. Drawer Center
Phillips screwdriver

P. Right Drawer Side

D. Drop Side

R. Drawer Front

G. Right headboard glide H. Left headboard glide

J. Right drawer glide
revised 03-2008

K. Left drawer glide

S. Drawer Bottom (2)

HARDWARE
T. 1 3/8” Allen head bolt (8) U. Wing nut (8) V. 5/8” flat head wood screw (12) W. 1 1/2” flat head wood screw (6) X. Cam lock bolt (3)

Y. 1 3/4” Allen head bolt (4)

Z. 2 1/4” Allen head bolt (4)

AA. Barrel nut (4)

BB. Allen wrench

CC. Cam lock (3)

DD. wood dowel (8)

EE. plastic plug (4)

Q. 1 3/4” flat head wood screw for bases (4)

W-1. 1 1/4” flat head wood screw (6)

Headboard Preassembly
Attach bases (O) to the bottom of left and right headboard (A and B) using wood dowels (DD), 1 3/4” flat head wood screws (Q) and plastic plugs (EE) as the illustration shown.

DD O

Q EE

DD O

Q EE

Left and right headboard (A and B)

Use 1 1/2” flat head wood screws (W) to attach the glide supports (I) to the left and right headboard (A and B). W W W Do not overtighten the screws.

I

STEP 1.
Attach the right headboard guide (G) to the right headboard (B) using three Phillips head screws (V). Make sure that the guide wheel is facing the drop side of the headboard (B). Do not overtighten the screws.

B

G V

STEP 2.
Attach the left headboard guide (H) to the left headboard (A) using three Phillips head screws (V).

A

Make sure that the guide wheel is facing the drop side of the headboard (A). Do not overtighten the screws.

H V

STEP 3.
It is recommended that two people perform the assembly. Insert 4 barrel nuts (AA) into the holes near each ends of the two wood rails (E).

AA

Attach the rails to the headboards with four Allen head bolts (Z). Use the Allen wrench to partially tighten the bolts. Do not fully tighten the bolts yet. This will help the attachment of the drop side (D) later.

Z

U STEP 4.
Align the hole of each support arm on the spring frame (F) with the holes in the side rails (E), attach the arms to the rails with Allen head bolts (T) and wing nuts (U). Set the height of the spring frame (F) by aligning the holes in the opposite end of the arm with the holes in the spring frame. Start with the highest position and adjust as to lower positions as your child grows. Use four Allen head bolts (T) and wing nuts (U) to secure the arms to the frame. Make sure that the spring frame is level.

T

U

T

STEP 5. Y
Align the holes in the stationary side (C) with the holes in the corner posts of each headboard. Attach the stationary side (C) using four Allen head bolts (Y) with the Allen wrench (BB). Do not tighten the bolts completely yet.

C

Y

STEP 6.
Turn the crib on its side. Be sure to lay it on a soft surface to prevent scratching of the finish. Align the upper knobs of the drop side (D) with the holes along the recessed tracks in each headboard. Slightly rotate the side and slide it upwards. Fit the lower pins of the stationary side (D) into the plastic guides. Continue to slide the drop side until it stops.

D

Now tighten all of the bolts from steps 3 and 5 with the Allen wrench. Do not overtighten the bolts.

J

K

STEP 7.
Attach the right drawer glide (J) to the right drawer side (P) using three 5/8” flat head wood screws (V) on the side.

V

V

Attach the left drawer glide (K) to the left drawer side (M) using three 5/8” flat head wood screws (V) on the side.

STEP 8. P M
With your Phillips screwdriver screw three cam lock bolts (X) into the threaded inserts in the drawer front. Insert cam locks (CC) into the holes in the drawer sides (M) & (P) and the drawer center (N). Assemble the drawer front as shown in insert A. Lock the cam locks by turning them clockwise with a Phillips screwdriver until they are snug as shown in insert B. Slide the drawer bottoms (S) into the grooves in the sides and front.

R CC

CC S

M

CC S P
Make sure that the guide wheels are to the back of the drawer.

N X

CC

L

STEP 9.
Place the drawer back (L) in position on the drawer assembly.

W-1 STEP 10. W-1 L
Use the six 1 1/4” flat head wood screws (W-1) to attach the drawer back (L). Do not overtighten.

W-1

STEP 11.
Stand the crib upright on its legs. Align the drawer glides with the headboard glides. Tip the drawer up slightly and slide it into the tracks.

STEP 12.
Before placing your mattress in the crib, you can make your own mattress protector by cutting the cardboard packing insert to 27”x 51”. Place it on the spring frame under the mattress to extend the life of the mattress.

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.

Please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase , the date of purchase and the wood finish in the box to the lower right.

WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL INSIDE THE PLASTIC HOLDER ATTACHED TO THE MATTRESS SUPPORT FOR FUTURE REFERENCE.

“CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES BY 51 5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES.”
MODEL/ITEM NUMBER SERIAL NUMBER DATE OF MANUFACTURE

Model Number: Serial Number: Store Where Purchased: Date of Purchase:

XXXX XXXXXXXX XX/XXXX

THIS PRODUCT CONFORMS TO THE APPLICABLE REGULATIONS OF THE CONSUMER PRODUCTS SAFETY COMMISSION.

855 WASHINGTON BLVD. MONTEBELLO, CA 90640

Wood Finish:

Crib warning label 3” X 5.5”

SAMPLE LABEL

Please read the Caution and Warning Statements insert before using your crib.

WARNING:

ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models. This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the finish, design, and hardware of the crib. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some stated do not allow limitation on how long an implied warranty lasts.

Failure to follow these warnings and the assembly instructions could result in serious injury or death.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THE MANUAL FOR FUTURE USE.
•	Infants can suffocate on soft bedding. Never add a pillow, comforter or padding. •	To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician. •	Strings can cause strangulation! Do not place items with a string around a child’s	neck,	such	as	hood	strings	or	pacifier	cords.	Do	not	suspend	strings	over	 a crib or attach strings to toys. •	To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners. •	DO NOT place a crib near a window where cords from blinds or drapes may strangle a child. •	When a child is able to pull to a standing position, set the mattress to the lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out. •	For cribs with drop sides, after raising side, make sure latches are secure. •	For cribs with drop sides, DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position whenever child is in crib. •	When a child is able to climb out, reaches the height of 35 inches (90cm), the child should be placed in a youth or regular bed, and the crib shall no longer be used. •	Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. Contact Million Dollar Baby for replacement parts and instructional literature if needed. DO NOT substitute parts. •	DO NOT use a water mattress with this crib. •	For cribs equipped with teething rails, replace teething rail if damaged, cracked or loose. •	If	refinishing,	use	a	non-toxic	finish	specified	for	children’s	products. •	Never	use	plastic	shipping	bags	or	other	plastic	films	as	mattress	covers	because they can cause suffocation. •	Infants can suffocate in gaps between crib sides when used with a mattress that is too small. •	Check fasteners periodically for tightness. Do not overtighten. This may cause distortion or breakage. •	Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute for a parent’s supervision. •	When	re-assembling	the	crib	for	your	second	child,	please	keep	in	mind	that	the	 screw	holes	will	need	to	be	filled	in	order	for	the	screws	to	grip	the	wood,	Talk	to	 your local hardware store or lumber yard about how to do this properly.

WARNING:

Registering your product is even easier than before. You can register your product on our website at www.milliondollarbaby.com Care and Cleaning: Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag. rinse and dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products. If you choose to refinish this furniture, the warranty will be voided. IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.MILLIONDOLLARBABY.COM OR YOU CAN CONTACT US BY MAIL: MILLION DOLLAR BABY 855 WASHINGTON BLVD. MONTEBELLO, CA 90640


								
To top