Twinkle Crib (M2301) - Assembly and Operation Manual
Congratulations on purchasing a Million Dollar Baby Product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our cribs are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship. DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
A. Stationary (longer) Side
B. Drop Side
E. Crossbars x 2
C. Left Headboard
D. Right Headboard
K. Mattress Support
F. Front G. Front left leg right leg
H. Rear I. Rear left leg right leg
L. 2 1/4” Bolts x 12 M. 1 1/2” Bolts x 4 N. 3/4” Bolts x 4
S. Barrel Nuts x 8
O. Rail Stops x 2
P. Top Rail Brackets x 2
ZZ. Allen Wrench U. Top Rail Shoes x 2 X. 5/8” Screws x 12 Tools Needed (not included) V. Right Bottom Rail Shoe Y. 3/4” Screws x 8
Q. Left Bottom Rail Bracket
R. Right Bottom Rail Bracket
T. Post Brackets x 4
W. Left Bottom Rail Shoe
Z. 1” Screws x 12
STEP 1.) Attach post brackets and rail brackets to legs.
Z Z Z X X X Z Z Z Z X X Y Z Z Z
Front right leg
Front left leg
Rear right leg
Do not overtighten.
Rear left leg
STEP 2.) Assemble legs and crossbars to headboards.
M L S
M S L
I L L
Do not overtighten.
STEP 3.) Attach rail shoes to drop side.
U Y Y
Z Y Do not overtighten. Y Z
Do not overtighten.
STEP 4.) Assemble stationary (longer) side
Do not overtighten.
STEP 5.) Attach mattress support to the post brackets.
Make sure the mattress support is installed FLAT SIDE UP. Make sure the mattress support is level when installing. As your child grows, it is important to lower the mattress support.
N Do not overtighten.
To lower the drop side: lift the drop side up and push in the bottom edge to unlock. Then gently push the drop side down and it will release.
STEP 6.) Install drop side.
Recheck all screws and bolts to be sure they are fastened securely . Do not overtighten. Before using your crib, please read all cautionary statements on the insert sheet. Before placing your mattress in the crib, you can make your own mattress protector by cutting the cardboard packing insert to 27”x 51”. Place it on the spring frame under the mattress to extend the life of the mattress.
Warning: Always install the stationary side with teething rail side facing up.
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES.
Please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase , the date of purchase and the wood ﬁnish in the box to the lower right. WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL INSIDE THE PLASTIC HOLDER ATTACHED TO THE MATTRESS SUPPORT FOR FUTURE REFERENCE.
Please read the Caution and Warning Statements insert before using your product.
ONE YEAR LIMITED WARRANTY:
Failure to follow these warnings and the assembly instructions could result in serious injury or death.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THE MANUAL FOR FUTURE USE.
• Infants can suffocate on soft bedding. Never add a pillow, comforter or padding. • To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician. • Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or paciﬁer cords. Do not suspend strings over a crib or attach strings to toys. • To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners. • DO NOT place a crib near a window where cords from blinds or drapes may strangle a child. • When a child is able to pull to a standing position, set the mattress to the lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out. • For cribs with drop sides, after raising side, make sure latches are secure. • For cribs with drop sides, DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position whenever child is in crib. • When a child is able to climb out, reaches the height of 35 inches (90cm), the child should be placed in a youth or regular bed, and the crib shall no longer be used. • Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. Contact Million Dollar Baby for replacement parts and instructional literature if needed. DO NOT substitute parts. • DO NOT use a water mattress with this crib. • For cribs equipped with teething rails, replace teething rail if damaged, cracked or loose. • If reﬁnishing, use a non-toxic ﬁnish speciﬁed for children’s products. • Never use plastic shipping bags or other plastic ﬁlms as mattress covers because they can cause suffocation. • Infants can suffocate in gaps between crib sides when used with a mattress that is too small. • Check fasteners periodically for tightness. Do not overtighten. This may cause distortion or breakage. • Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute for a parent’s supervision. • When re-assembling the crib for your second child, please keep in mind that the screw holes will need to be ﬁlled in order for the screws to grip the wood, Talk to your local hardware store or lumber yard about how to do this properly.
We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models. This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the ﬁnish, design, and hardware of the crib. The speciﬁc legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some stated do not allow limitation on how long an implied warranty lasts.
Registering your product is even easier than before. You can register your product on our website at www.milliondollarbaby.com Please DO NOT remove any wood screws in the normal disassembly of the crib. Care and Cleaning:
• Do not scratch or chip the ﬁnish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag. rinse and dry thoroughly. If you ever reﬁnish this furniture, be sure to use only a non-toxic ﬁnish speciﬁed for children’s products. If you choose to reﬁnish this furniture, the warranty will be voided.
• Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore it is best to place your furniture away from heating or air-conditioning vents. • Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. • As with all your fine furniture, blot up spills immediately. IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.MILLIONDOLLARBABY.COM OR YOU CAN CONTACT US BY MAIL : MILLION DOLLAR BABY 855 WASHINGTON BLVD. MONTEBELLO, CA 90640