Elizabeth II Toddler Bed (M0810) - Assembly and Operation Manual
Congratulations on purchasing Million Dollar Baby product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This product is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THE PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
Please read the Caution and Warning Statements insert before using your product.
revised 02-2009 Page 1
A. 3” Machine Screw X 8 B. 2-1/2” Machine Screw X 12
Tools Needed (not included)
C. 1-3/4” Machine Screw X 4
D. Barrel Nut X 24
F. 3/4” Wood Screw X 6
E.. Guard Rail Fastener X 2
I O M L
G. Headboard H. Left Side Panel I. Right Side Panel J. Front Left Leg K. Front Right Leg L. Center support Rail M. Support Rail X 6 N. Front Rail O. Guard Rail X 2
ane ide P
G. Headboard D
D D D
J. Front Left Leg
D L. Center support Rail M. Support Rail K. Front Right Leg
eP t Sid anel
Following the above illustration and assemble the toddler bed.
O. Guard Rail
Installing the guard rail Use two machine screws A and two barrel nuts D, install the guard rail as shown. You have the option of installing the guard rail on either the left or right side. The illustration to the left shows the installation for the left side of the toddler bed.
CAUTION: THE MATTRESS INTENDED FOR USE ON THE BED IS TO HAVE MINIMUM DIMENSIONS OF : 51 5/8 X 27 1/4 X 4 INCHES THICK.
The minimum age shall not be less than 15 months and the maximum weight shall not be greater than 50 lbs to use toddler bed conversion. Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation. Do not place the bed near windows where cords from blinds or drapes may strangle a child. DO NOT suspend strings over a toddler bed for any reason. If guard rails are used as the mattress containment means, the guard rails provided must be used to avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
Failure to follow these warnings and the assembly instructions could result in serious injury or death.
Care and Cleaning:
Check regularly to see that all fasteners are tight. Regularly inspect toddler bed for damaged hardware, loose joints, missing parts, or sharp edges. DO NOT use the bed if any parts are missing or broken. Ask your dealer or contact manufacturer for replacement parts and instructional literature if needed. This product is for residential use only. Any institutional use is strictly prohibited.
• Do not scratch or chip the ﬁnish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag. rinse and dry thoroughly. If you ever reﬁnish this furniture, be sure to use only a non-toxic ﬁnish speciﬁed for children’s products. If you choose to reﬁnish this furniture, the warranty will be voided.
Cherry___ Oak___ Maple___ White___ Natural___ Unfinished___ Other___
• Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore it is best to place your furniture away from heating or air-conditioning vents. • Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. • As with all your fine furniture, blot up spills immediately.
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models. This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the ﬁnish, design, and hardware of the crib. The speciﬁc legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some stated do not allow limitation on how long an implied warranty lasts.
Registering your product is even easier than before. You can register your product on our website at www.milliondollarbaby.com
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.MILLIONDOLLARBABY.COM OR YOU CAN CONTACT US BY MAIL : MILLION DOLLAR BABY 855 WASHINGTON BLVD. MONTEBELLO, CA 90640
Elizabeth II Toddler Bed (M0810) - Full Size Bed Conversion
* Please contact a retailer to order your full size adult wooden bed rails for your full size bed conversion.
Detach the section as shown This will be your footboard for the full size conversion. Remove all other parts from the headboard.
Install the second guard rail as shown Depending on where you initially installed the first guard rail, the second one will be installed opposite to it. The illustration shows the second installed to the right. Once installed, you will have your footboard for the full size bed.
O. Guard Rail
With our rail kit (sold separately), assemble the headboard and footboard as shown. Hardware is included in the rail and comes with 8 machine bolts and 8 hex nuts.