Docstoc

STEPS IN DUPLICATING A MODEL

Document Sample
STEPS IN DUPLICATING A MODEL Powered By Docstoc
					          STEPS IN
         DUPLICATING
           A MODEL
Construct Models HLTDT301B - Wk 4
                                    1
Duplicating
Stage1-Ver1-Sem1-09
     PURPOSE FOR DUPLICATING

    • TO MAKE AN
      EXACT COPY
      OF A MODEL

    • TO MAKE A
      WORKING
      MODEL


Construct Models HLTDT301B - Wk 4
                                    2
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 1
     • SOAK THE MODEL
       TO REMOVE ANY
       TRAPPED AIR

     • SOAKING THE
       MODEL STOPS THE
       DUPLICATING
       MATERIAL
       STICKING TO THE
       MODEL

Construct Models HLTDT301B - Wk 4
                                             3
Duplicating
Stage1-Ver1-Sem1-09
                  DUPLICATING FLASK


     • SIGN OUT A
       DUPLICATING
       FLASK FROM
       THE STORE




Construct Models HLTDT301B - Wk 4
                                      4
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 2

   • POSITION THE
     MODEL SO
     THAT IT IS IN
     THE CENTRE
     OF THE FLASK




Construct Models HLTDT301B - Wk 4
                                             5
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 3

     • RE POSITION
       THE TOP OF
       THE FLASK
       MAKING SURE
       THAT IT HAS
       CLEARANCE
       FROM THE
       MODEL

Construct Models HLTDT301B - Wk 4
                                             6
Duplicating
Stage1-Ver1-Sem1-09
             DUPLICATING MACHINE


     • DO NOT
       PRESS ANY
       BUTTONS ON
       THE MACHINE




Construct Models HLTDT301B - Wk 4
                                    7
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 4

    • SLOWLY PULL
      THE HANDLE
      ON THE
      DUPLICATING
      MACHINE UNTIL
      A SLOW EVEN
      FLOW IS
      PRODUCED


Construct Models HLTDT301B - Wk 4
                                             8
Duplicating
Stage1-Ver1-Sem1-09
     • ALWAYS WATCH
       YOUR WORK
       WHILE IT IS BEING
       FILLED WITH THE
       DUPLICATING
       MATERIAL



Construct Models HLTDT301B - Wk 4
                                    9
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 5

     • ALLOW 40
       MINUTES
       FOR THE
       MATERIAL
       TO SET
       (BENCH
       COOL)


Construct Models HLTDT301B - Wk 4
                                             10
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 6

     • CUT ANY EXCESS
       MATERIAL FLAT TO
       THE LEVEL OF THE
       FLASK SO THAT
       THE MOULD IS NOT
       DISTORTED ONCE
       TURNED OVER



Construct Models HLTDT301B - Wk 4
                                             11
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 7

    • ONCE MATERIAL
      HAS SET

    • REMOVE THE BASE
      AND PICK OUT
      PLASTICINE


Construct Models HLTDT301B - Wk 4
Duplicating                                  12
Stage1-Ver1-Sem1-09
                                    STEP 8
     • REMOVE THE
       MODEL
       CAREFULLY SO
       NOT TO
       DAMAGE THE
       DUPLICATING
       MATERIAL

     • INSPECT FOR
       ANY VOIDS OR
       BUBBLES
Construct Models HLTDT301B - Wk 4
                                             13
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 9
• MIX THE
  CORRECT
  STONE AND
  POUR AS
  PER USUAL
  (STARTING
  AT ONE END
  AND
  VIBRATING
  TO THE
  OTHER)
Construct Models HLTDT301B - Wk 4
                                             14
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 10
 • ALLOW
   THE
   STONE TO
   SET THEN
   REMOVE
   FROM
   THE
   FLASK



Construct Models HLTDT301B - Wk 4
                                              15
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 11

    • PEEL THE MATERIAL
      AWAY FROM THE
      DUPLICATE MODEL

    • DO NOT USE AN
      INSRTUMENT AS YOU
      MIGHT DAMAGE THE
      MODEL

Construct Models HLTDT301B - Wk 4
                                              16
Duplicating
Stage1-Ver1-Sem1-09
• WASH THE
  MATERIAL AND
  PLACE IT BACK
  IN THE BOX
  SUPPLIED

• HYDROCOLLOID
  IS REUSEABLE


Construct Models HLTDT301B - Wk 4
                                    17
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 12


   • USING THE MODEL
     TRIMMER
     PROCEED TO TRIM
     THE MODEL




Construct Models HLTDT301B - Wk 4
                                              18
Duplicating
Stage1-Ver1-Sem1-09
                                    STEP 13
     • WASH AND
       LABEL THE
       MODEL

     • YOU HAVE
       NOW
       DUPLICATED
       A MODEL


Construct Models HLTDT301B - Wk 4
                                              19
Duplicating
Stage1-Ver1-Sem1-09

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:5
posted:4/23/2012
language:
pages:19