iso update february2012 by 0r4lC3

VIEWS: 327 PAGES: 38

									International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.




CD registered

Period from 01 January to 31 January 2012

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.



TC 8                      Ships and marine technology

ISO/CD 28005-1            Security management systems for the supply chain — Electr onic port clearance (EPC) — Part 1: Message structures

ISO/CD PAS 28005-         Security management systems for the supply chain — Electr onic port clearance (EPC) — Part 1: Message structures
1

ISO/CD 16707              Ships and marine technology — Marine evacuation systems — Determination of capacity of Marine Evacuation
                          Systems (MES)

ISO/CD 14885              Ships and marine technology - Large Yachts - Auxiliary diesel engines - Safety requirements

TC 10                     Technical product documentation

ISO/CD 10628-1            Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams

TC 17                     Steel

ISO/CD 7778               Through-thickness characteristics for steel products

ISO/CD 3573               Hot-rolled carbon steel sheet of commercial and drawing qualities

ISO/CD 3574               Cold-reduced carbon steel sheet of commercial and drawing qualities

ISO/CD 5002               Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

ISO/CD 5951               Hot-rolled steel sheet of higher yield strength with improved formability

ISO/CD 6316               Hot-rolled steel strip of structural quality

ISO/CD 10384              Hot-rolled carbon steel sheet as defined by chemical composition

TC 20                     Aircraft and space vehicles

ISO/CD 14186              Air cargo - Fire containment covers - Performance and testing requirements
TC 22             Road vehicles

ISO/CD 16552      Heavy commercial vehicles and buses — Stopping distance in straight-line braking with ABS — Open loop and closed
                  loop test methods

TC 30             Measurement of fluid flow in closed conduits

ISO/CD 10790      Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass
                  flow, density and volume flow measurements)

TC 34             Food products

ISO/CD 2451       Cocoa beans — Specification

ISO/CD 22002-2    Prerequisite programmes on food safety — Part 2: Catering

TC 46             Information and documentation

ISO/CD 2789       Information and documentation — International library statistics

TC 59             Buildings and civil engineering works

ISO/CD 6707-1     Building and civil engineering — Vocabulary — Part 1: General terms

TC 85             Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 11665-10   Measurement of radioactivity in the environment — Air: radon-222 — Part 10: Determination of diffusion coefficient in
                  waterproof materials using activity concentration measurement

TC 92             Fire safety

ISO/CD 3814       Tests for measuring "reaction-to-fire" of building materials — Their development and application

ISO/CD 16405      Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry

ISO/CD 834-10     Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the
                  contribution of applied fire protection materials to structural elements

ISO/CD 3008-2     Fire-resistance tests — Part 2: Lift landing door assemblies

ISO/DTR 15657     Fire resistance tests — Guidelines for computational structural fire design

ISO/DTS 13447     Fire Safety Engineering - Guidance for use of zone fire models

ISO/CD 16730-2    Fire safety engineering — Assessment, verification and validation of calculation methods — Part 2: Example of a Fire
                  zone model

TC 96             Cranes

ISO/DTS 15696     Cranes — List of equivalent terms

TC 112            Vacuum technology

ISO/CD 2861-1     Vacuum technology — Quick-release couplings — Dimensions — Part 1: Clamped type

TC 121            Anaesthetic and respiratory equipment

ISO/CD 5359       Low-pressure hose assemblies for use with medical gases

TC 138            Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 11297-1    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1:
                  General

ISO/CD 11297-3    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3:
                  Lining with close-fit pipes

TC 149            Cycles
ISO/CD 6742-1        Cycles — Lighting and retro-reflective devices — -- Part 1: Lighting and signalling devices

ISO/CD 6742-2        Cycles — Lighting and retro-reflective devices — -- Part 2: Retro-reflective devices

TC 150               Implants for surgery

ISO/CD 14243-4       Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral joint — Loading and
                     displacement parameters for wear-testing machines and corresponding environmental conditions for test

TC 163               Thermal performance and energy use in the built environment

ISO/CD 6781-3        Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3:
                     Qualifications of Equipment Operators, Data Analysts and Report Writers

TC 165               Timber structures

ISO/CD 10983         Timber structures — Solid timber finger-jointing — Production requirements

TC 181               Safety of toys

ISO 8124-1:2009/CD   Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 6: Cords
Amd 6

ISO/CD 8124-2        Safety of toys — Part 2: Flammability

ISO 8124-4:2010/CD   Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use —
Amd 2                Amendment 2: Paddling pools

ISO/CD 8124-6        Safety of toys — Part 6: Toys and children's products — Determination of phthalate plasticizers in polyvinyl chloride
                     plastics

TC 190               Soil quality

ISO/CD 11074         Soil quality — Vocabulary

ISO/CD 14388-1       Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 1: Introduction and definitions, symbols and
                     acronyms, sampling and sample preparation

ISO/CD 14388-2       Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 2: Chromium reducible sulfur (CRS)
                     methodology

ISO/CD 14388-3       Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 3: Suspension peroxide oxidation combined
                     acidity and sulfur (SPOCAS) methodology

TC 197               Hydrogen technologies

ISO/CD 15399         Gaseous hydrogen - Cylinders and tubes for stationary storage

TC 204               Intelligent transport systems

ISO/CD 15638-7       Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight
                     Vehicles (TARV) — Part 7: Other applications

ISO/CD TS 15638-7    Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight
                     Vehicles (TARV) — Part 7: Other applications

TC 211               Geographic information/Geomatics

ISO/CD 19147         Geographic information — Location based services — Transfer Nodes

TC 215               Health informatics

ISO/DTS 14441        Health Informatics: Security and privacy requirements for compliance testing of EHR systems

TC 238               Solid biofuels

ISO/CD 17225-1       Solid biofuels — Fuel specifications and classes — Part 1: General requirements

ISO/CD 17225-2       Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets
ISO/CD 17225-3           Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes

ISO/CD 17225-4           Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips

ISO/CD 17225-5           Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood

ISO/CD 17225-6           Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets

ISO/CD 17225-7           Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes

TC 247                   Fraud countermeasures and controls

ISO/CD 16125             Fraud Countermeasures and Controls- Security management system- Requirements

CASCO                    Committee on conformity assessment

ISO/IEC DTS 17021-       Conformity assessment — Requirements for third party certification auditing of environmental management systems —
2                        Part 2: Competence requirements

JTC 1                    Information technology

ISO/IEC PDTR             Telecommunications and Information Exchange Between Systems — Future Networks: Problem Statement and
29181-3                  Requirements — Part 3: Switching and Routing

ISO/IEC CD 15940         Information Technology — Software Engineering Environment Services

ISO/IEC CD 19770-5       Information technology — Software asset management — Part 5: Overview and vocabulary

ISO/IEC CD 33063         Information technology — Process assessment — Process assessment model for software testing

ISO/IEC CD 11694-4       Identification cards — Optical memory cards — Linear recording method — Part 4: Logical data structures

ISO/IEC CD 11694-5       Identification cards — Optical memory cards — Linear recording method — Part 5: Data format for information
                         interchange for applications using ISO/IEC 11694-4, Annex B

ISO/IEC CD 11694-6       Identification cards — Optical memory cards — Linear recording method — Part 6: Use of biometrics on an optical
                         memory card

ISO/IEC CD 29145-1       Interconnection of Information Technology Equipement — WiBEEM Standard for Wireless Home Network Services —
                         Part 1:

ISO/IEC CD 29145-2       Information technology - WiBEEM Standard for Wireless Home Network Services — Part 2:

ISO/IEC CD 29145-3       Information technology - WiBEEM Standard for Wireless Home Network Services — Part 3:

ISO/IEC CD 27033-4       Information technology — Security techniques — Network security — Part 4: Securing communications between
                         networks using security gateways

ISO/IEC CD 29142-1       Cartridge Characterization Standard — Part 1: General : terms, symbols and notations

ISO/IEC CD 29142-2       Cartridge Characterization Standard — Part 2: Labeling

ISO/IEC 21000-           Information technology — Multimedia framework (MPEG-21) — Part 3: Digital Item Identification — Amendment 2:
3:2003/PDAM 2            Digital item semantic relationships




DIS circulated

Period from 01 January to 31 January 2012

These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only


                                                                                                                                 Vote terminates

TC 4                          Rolling bearings

ISO                      * Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions           2012-06-12
1206:2001/DAmd 1           and tolerances — Amendment 1: Tolerance limits for shaft raceway and housing bore diameters

TC 6                          Paper, board and pulps

ISO/DIS 5636-3           * Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method                 2012-06-06
                              (Revision of ISO 5636-3:1992)

ISO/DIS 5636-4           * Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method                2012-06-06
                              (Revision of ISO 5636-4:2005)

ISO/DIS 5636-5           * Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method                   2012-06-06
                              (Revision of ISO 5636-5:2003)

TC 8                          Ships and marine technology

ISO/DIS 19292.2          * Ships and marine technology — Lifesaving and fire protection — Point-type resettable flame                2012-03-12
                           detectors for ships

ISO/DIS 13643-1               Ships and marine technology - Manoeuvring of ships — Part 1: General concepts, quantities and          2012-06-26
                              test conditions

ISO/DIS 13643-2               Ships and marine technology - Manoeuvring of ships — Part 2: Turning and yaw checking                  2012-06-26

ISO/DIS 13643-3               Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering                2012-06-26

ISO/DIS 13643-4               Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing        2012-06-26

ISO/DIS 16425                 Ships and marine technology — Installation guideline for ship communication network of improving       2012-07-02
                              communication for shipboard equipment and systems

ISO/DIS 16145-4          * Ships and marine technology — Protective coatings and inspection method — Part 4: Automated               2012-06-12
                           measuring method for the total amount of water-soluble salts

TC 17                         Steel

ISO/DIS 14404-1               Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1:       2012-06-25
                              Steel plant with blast furnace

ISO/DIS 14404-2               Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2:       2012-06-25
                              Steel plant with electric arc furnace (EAF)

TC 20                         Aircraft and space vehicles

ISO/DIS 16049-1          * Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods                      2012-06-07
                              (Revision of ISO 16049-1:2001)

TC 22                         Road vehicles

ISO/DIS 18669-1          * Internal combustion engines — Piston pins — Part 1: General specifications                                2012-06-07
                              (Revision of ISO 18669-1:2004)

ISO/IEC DIS 15118-1      * Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-            2012-06-20
                           case definition

ISO/DIS 17458-1          * Road vehicles — FlexRay communications system — Part 1: General information and use case                  2012-06-13
                           definition

ISO/DIS 17458-2          * Road vehicles — FlexRay communications system — Part 2: Data link layer specification                     2012-06-13
ISO/DIS 17458-3     * Road vehicles — FlexRay communications system — Part 3: Data link layer conformance test            2012-06-13
                      specification

ISO/DIS 17458-4     * Road vehicles — FlexRay communications system — Part 4: Electrical physical layer specification     2012-06-13

ISO/DIS 17458-5     * Road vehicles — FlexRay communications system — Part 5: Electrical physical layer conformance       2012-06-13
                      test specification

ISO/DIS 2698        * Diesel engines — Clamp-mounted fuel injectors, types 7 and 28                                       2012-06-25
                      (Revision of ISO 2698:1993)

ISO/DIS 12619-1     * Road vehicles - Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel              2012-06-07
                      system components — Part 1: General requirements and definitions

ISO/DIS 12619-2     * Road vehicles — Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel              2012-06-07
                      system components — Part 2: Performance and general test methods

ISO/DIS 12619-3     * Road vehicles — Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel              2012-06-07
                      system components — Part 3: Pressure regulator

TC 23                 Tractors and machinery for agriculture and forestry

ISO/DIS 5395-1.2    * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1:           2012-03-06
                      Terminology and common tests
                      (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992)

ISO/DIS 5395-2.2    * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2:           2012-03-06
                      Pedestrian-controlled lawnmowers
                      (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992)

ISO/DIS 5395-3.2    * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3:           2012-03-06
                      Ride-on lawnmowers
                      (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992)

TC 28                 Petroleum products and lubricants

ISO/DIS 8310        * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General                  2012-06-26
                      requirements for automatic tank thermometers on board marine carriers and floating storage
                      (Revision of ISO 8310:1991)

TC 34                 Food products

ISO/DIS 21572.2     * Foodstuffs — Molecular biomarker analysis — Protein-based methods                                   2012-03-27
                      (Revision of ISO 21572:2004, ISO 21572:2004/Cor 1:2005)

TC 42                 Photography

ISO/DIS 15781         Photography — Digital cameras — Measuring shooting time lag, shutter release time lag, shooting     2012-07-02
                      rate, and start-up time

TC 44                 Welding and allied processes

ISO                 * Welding for aerospace applications — Qualification test for welders and welding operators —         2012-04-05
24394:2008/DAmd 1     Fusion welding of metallic components — Amendment 1

TC 45                 Rubber and rubber products

ISO/DIS 13507.2       Rubber compounds, raw rubbers and compounding materials — Short terms for properties reported       2012-03-26
                      in certificates of analysis

ISO/DIS 3384-2.2    * Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2:   2012-03-13
                      Testing with temperature cycling

ISO/DIS 12492.2     * Rubber, raw — Determination of water content by the Karl Fischer method                             2012-03-13

ISO/DIS 13145.2       Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear            2012-03-25
                      rheometer
ISO/DIS 17278       * Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)                2012-06-13

ISO/DIS 14285         Rubber and plastics gloves for food services — Limits for extractable substances                            2012-07-01

TC 54                 Essential oils

ISO/DIS 4716        * Essential oil of vetiver [Vetiveria zizanioides (L.) Nash]                                                  2012-06-18
                      (Revision of ISO 4716:2002)

ISO/DIS 4719        * Essential oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type                          2012-06-14
                      (Revision of ISO 4719:1999)

TC 58                 Gas cylinders

ISO/DIS 11119-3.2   * Gas cylinders of composite construction — Specification and test methods — Part 3: Fully wrapped            2012-03-14
                      fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or
                      non-metallic liners
                      (Revision of ISO 11119-3:2002)

ISO/DIS 11515.2     * Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L            2012-03-14
                      — Design, construction and testing

TC 61                 Plastics

ISO/DIS 75-1        * Plastics — Determination of temperature of deflection under load — Part 1: General test method              2012-06-13
                      (Revision of ISO 75-1:2004)

ISO 180:2000/DAmd   * Plastics — Determination of Izod impact strength — Amendment 2: Precision data                              2012-06-13
2

ISO/DIS 306         * Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)                     2012-06-13
                      (Revision of ISO 306:2004)

ISO/DIS 10123       * Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar                     2012-06-11
                      specimens
                      (Revision of ISO 10123:1990)

ISO/DIS 10364       * Structural adhesives — Determination of the pot life (working life) of multi-component adhesives            2012-06-11
                      (Revision of ISO 10364:2007)

ISO/DIS 17178         Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum                            2012-06-25
                      requirements

TC 67                 Materials, equipment and offshore structures for petroleum, petrochemical and
                      natural gas industries

ISO/DIS 13628-6       Petroleum and natural gas industries — Design and operation of subsea production systems —                  2012-06-13
                      Part 6: Subsea production control systems
                      (Revision of ISO 13628-6:2006)

TC 69                 Applications of statistical methods

ISO/DIS 11843-6.2     Capability of detection — Part 6: Methodology for the determination of the critical value and the           2012-04-25
                      minimum detectable value in Poisson distributed measurements by normal approximations

TC 70                 Internal combustion engines

ISO/DIS 4548-5      * Full-flow lubricating oil filters for internal combustion engines — Part 5: Method of test for cold start   2012-06-12
                      simulation and hydraulic pulse durability
                      (Revision of ISO 4548-5:1990)

TC 79                 Light metals and their alloys

ISO/DIS 28340         Combined coatings on aluminium — General specifications for combined coatings of                            2012-06-21
                      electrophoretic organic coatings and anodic oxidation coatings on aluminium
TC 83                  Sports and recreational equipment

ISO/DIS 5902         * Alpine skis — Determination of elastic properties                                                      2012-06-18
                       (Revision of ISO 5902:1980)

ISO/DIS 6265         * Alpine skis — Determination of deformation load and breaking load                                      2012-06-14
                       (Revision of ISO 6265:1992)

ISO/DIS 6266         * Alpine skis — Determination of fatigue indexes — Cyclic loading test                                   2012-06-14
                       (Revision of ISO 6266:1980)

ISO/DIS 9462         * Alpine ski-bindings — Requirements and test methods                                                    2012-06-07
                       (Revision of ISO 9462:2006, ISO 9462:2006/Amd 1:2009)

TC 85                  Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 18589-7      * Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-         2012-06-21
                       emitting radionuclides

ISO/DIS 19238        * Radiation protection — Performance criteria for service laboratories performing biological dosimetry   2012-06-07
                       by cytogenetics
                       (Revision of ISO 19238:2004)

ISO/DIS 28057        * Dosimetry with solid thermoluminescence detectors for photon and electron radiations in                2012-06-11
                       radiotherapy

TC 86                  Refrigeration and air-conditioning

ISO/DIS 16358-1      * Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal   2012-06-14
                       performance factors — Part 1: Cooling seasonal performance factor

ISO/DIS 16358-2      * Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal   2012-06-14
                       performance factors — Part 2: Heating seasonal performance factor

ISO/DIS 16358-3      * Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal   2012-06-14
                       performance factors — Part 3: Annual performance factor

TC 87                  Cork

ISO/DIS 16419          Cork — Visual anomalies of cork stoppers for still wines                                               2012-06-28

TC 89                  Wood-based panels

ISO                  * Laminated veneer lumber (LVL) — Specifications — Amendment 1                                           2012-06-06
18776:2008/DAmd 1

TC 96                  Cranes

ISO/DIS 4305         * Mobile cranes — Determination of stability                                                             2012-06-07
                       (Revision of ISO 4305:1991)

ISO/DIS 9927-1.2     * Cranes — Inspections — Part 1: General                                                                 2012-03-07

TC 106                 Dentistry

ISO                  * Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1          2012-06-20
7405:2008/DAmd 1

TC 114                 Horology

ISO 6426-            * Horological vocabulary — Part 2: Technical and commercial definitions — Amendment 1                    2012-06-07
2:2002/DAmd 1

TC 121                 Anaesthetic and respiratory equipment

IEC/DIS 60601-1-12     Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential          2012-06-16
                       performance - Collateral Standard: Requirements for medical electrical equipment and medical
                       electrical systems used in the emergency medical services environment
IEC 80601-2-           Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential     2012-06-30
30:2009/DAmd 1         performance of automated non-invasive sphygmomanometers — Amendment 1

ISO/DIS 80601-2-67   * Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential     2012-06-27
                       performance of oxygen-conserving equipment
                       (Revision of ISO 18779:2005)

TC 127                 Earth-moving machinery

ISO/DIS 3164           Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for        2012-06-13
                       deflection-limiting volume
                       (Revision of ISO 3164:1995)

TC 136                 Furniture

ISO/DIS 4211-2       * Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat                2012-06-26
                       (Revision of ISO 4211-2:1993)

ISO/DIS 4211-3       * Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat                2012-06-20
                       (Revision of ISO 4211-3:1993)

TC 146                 Air quality

ISO/DIS 12219-4      * Interior air of road vehicles — Part 4: Screening method for the determination of the emissions of   2012-07-01
                       volatile organic compounds from vehicle interior parts and materials — Small chamber method

TC 156                 Corrosion of metals and alloys

ISO/DIS 16539          Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic       2012-06-28
                       ocean water salt-deposition process --"Dry" and "wet" conditions at constant absolute humidity

TC 172                 Optics and photonics

ISO/DIS 11553-3.2    * Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise                  2012-03-13
                       measurement methods for laser processing machines and hand-held processing devices and
                       associated auxiliary equipment (accuracy grade 2)

TC 184                 Automation systems and integration

ISO/DIS 9787         * Robots and robotic devices — Coordinate systems and motion nomenclatures                             2012-06-20
                       (Revision of ISO 9787:1999)

ISO/DIS 20140-1      * Automation systems and integration — Environmental and energy efficiency evaluation method for       2012-06-18
                       manufacturing systems — Part 1: Overview and general principles

TC 201                 Surface chemical analysis

ISO/DIS 16413          Evaluation of thickness, density and interface width of thin films by X-ray reflectometry —          2012-06-24
                       Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

TC 204                 Intelligent transport systems

ISO/DIS 24531        * Intelligent transport systems — System architecture, taxonomy and terminology — Using XML in         2012-06-25
                       ITS standards, data registries and data dictionaries
                       (Revision of ISO 24531:2007)

ISO/DIS 26683-1      * Intelligent Transport Systems — Freight land conveyance content identification and communication     2012-06-26
                       architecture — Part 1: Application profile
                       (Revision of ISO/PRF TS 26683-1)

ISO/DIS 26683-2      * Intelligent transport systems — Freight land conveyance content identification and communication     2012-06-26
                       (FLC-CIC) — Part 2: Application interface profiles
                       (Revision of ISO/PRF TS 26683-2)

TC 205                 Building environment design

ISO/DIS 13675        * Heating and cooling systems in buildings - Method and design for calculation of the system energy    2012-06-24
                        performance - Combustion systems (boilers)

TC 206                  Fine ceramics

ISO/DIS 14629         * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of   2012-06-11
                        ceramic powders

TC 207                  Environmental management

ISO/DIS 14031         * Environmental management — Environmental performance evaluation — Guidelines                       2012-06-13
                        (Revision of ISO 14031:1999)

ISO/DIS 14067         * Carbon footprint of products — Requirements and guidelines for quantification and communication    2012-06-07

TC 216                  Footwear

ISO/DIS 16187         * Footwear — Test methods for uppers, lining and insocks - Antibacterial activity                    2012-06-20

TC 226                  Materials for the production of primary aluminium

ISO/DIS 12926         * Aluminium fluoride for industrial use — Determination of trace elements — Wavelength dispersive    2012-06-14
                        X-ray fluorescence spectrometric method using pressed powder tablets

TMB                     Technical Management Board

ISO/IEC DGuide 98-    * Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment      2012-05-26
4.2

IULTCS                  International Union of Leather Technologists and Chemists Societies

ISO/DIS 11646         * Leather — Measurement of area                                                                      2012-06-13
                        (Revision of ISO 11646:1993)

ISO/DIS 17130         * Leather - Physical and mechanical tests - Determination of dimensional change                      2012-06-13

ISO/DIS 17489         * Leather — Chemical tests — Determination of tan content in tanning agents                          2012-06-13

ISO/DIS 17502         * Leather — Determination of surface reflectance                                                     2012-06-13

JTC 1                   Information technology

ISO/IEC DIS 17982       Information technology — Telecommunications and information exchange between systems —             2012-06-11
                        Close Capacitive Coupling Communication Physical Layer (CCCC PHY)

ISO/IEC DIS 17998       Information technology — SOA Governance Framework                                                  2012-06-06

ISO/IEC DIS 18051       Information technology — Telecommunications and information exchange between systems —             2012-06-11
                        Services for Computer Supported Telecommunications Applications (CSTA) Phase III
                        (Revision of ISO/IEC 18051:2010)

ISO/IEC DIS 18052       Information technology — Telecommunications and information exchange between systems —             2012-06-11
                        ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
                        (Revision of ISO/IEC 18052:2011)

ISO/IEC DIS 18056       Information technology — Telecommunications and information exchange between systems —             2012-06-11
                        XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase
                        III
                        (Revision of ISO/IEC 18056:2010)

ISO/IEC DIS 25437       Information technology — Telecommunications and information exchange between systems — WS-         2012-06-11
                        Session — Web services for application session services
                        (Revision of ISO/IEC 25437:2009)

ISO/IEC DIS 15026-4     Systems and software engineering — Systems and software assurance — Part 4: Assurance in the       2012-06-06
                        life cycle

ISO/IEC DIS 26551       Software and systems engineering — Tools and methods for product line requirements engineering     2012-06-28
ISO/IEC DIS 26555             Software and systems engineering — Tools and methods for product line technical management            2012-06-28

ISO/IEC DIS 14165-            Information technology — Fibre Channel — Part 243: Backbone 3 (FC-BB-3)                               2012-06-28
243

ISO/IEC DIS 14776-            Information technology — Small Computer System Interface (SCSI) — Part 333: SCSI Stream               2012-07-01
333                           Commands - 3 (SSC-3)

ISO/IEC                       Information technology — Generic cabling systems for data centres — Amendment 1                       2012-07-01
24764:2010/DAmd 1

ISO/IEC DIS 19790             Information technology — Security techniques — Security requirements for cryptographic modules        2012-06-11

                              (Revision of ISO/IEC 19790:2006, ISO/IEC 19790:2006/Cor 1:2008)

ISO/IEC 14496-                Information technology — Coding of audio-visual objects — Part 12: ISO base media file format —       2012-06-06
12:2008/DAmd 4                Amendment 4: Various enhancements including support for large metadata

ISO/IEC 15444-                Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format          2012-06-06
12:2008/DAmd 4                — Amendment 4: Various enhancements including support for large metadata

ISO/IEC DIS 15938-            Information technology — Multimedia content description interface — Part 12: Query format             2012-06-06
12
                              (Revision of ISO/IEC 15938-12:2008, ISO/IEC 15938-12:2008/Cor 1:2009, ISO/IEC 15938-
                              12:2008/Cor 2:2010, ISO/IEC 15938-12:2008/Amd 1:2011, ISO/IEC 15938-12:2008/Amd 2:2011)

ISO/IEC DIS 23000-6           Information technology — Multimedia application format (MPEG-A) — Part 6: Professional archival       2012-06-18
                              application format
                              (Revision of ISO/IEC 23000-6:2009, ISO/IEC 23000-6:2009/Amd 1:2010, ISO/IEC 23000-
                              6:2009/Cor 1:2010, ISO/IEC 23000-6:2009/PDAM 2)

ISO/IEC 23001-                Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base            2012-06-18
7:2012/DAmd 1                 media file format files — Amendment 1: AES-CBC-128 and key rotation




FDIS circulated

Period from 01 January to 31 January 2012

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only



                                                                                                                                Vote terminates

TC 8                          Ships and marine technology

ISO/FDIS 14859        *       Ships and marine technology - Sound reception systems                                                 2012-03-13

TC 22                         Road vehicles

ISO/FDIS 13400-2      *       Road vehicles - Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport            2012-03-28
                              protocol and network layer services

ISO/FDIS 15500-2      *       Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance             2012-03-14
                              and general test methods
                              (Revision of ISO 15500-2:2001)

ISO/FDIS 15500-3      *       Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve             2012-03-14
                              (Revision of ISO 15500-3:2001)
ISO/FDIS 15500-4   *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve         2012-03-14
                       (Revision of ISO 15500-4:2001)

ISO/FDIS 15500-5   *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual               2012-03-14
                       cylinder valve
                       (Revision of ISO 15500-5:2001)

ISO/FDIS 15500-6   *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic            2012-03-14
                       valve
                       (Revision of ISO 15500-6:2001)

ISO/FDIS 15500-9   *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure             2012-03-14
                       regulator
                       (Revision of ISO 15500-9:2001)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure            2012-03-14
13                     relief device (PRD)
                       (Revision of ISO 15500-13:2001)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow         2012-03-14
14                     valve
                       (Revision of ISO 15500-14:2002)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel          2012-03-14
16                     line in stainless steel
                       (Revision of ISO 15500-16:2001)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel       2012-03-14
17                     line
                       (Revision of ISO 15500-17:2001)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter              2012-03-14
18
                       (Revision of ISO 15500-18:2001)

ISO/FDIS 15500-    *   Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings            2012-03-14
19
                       (Revision of ISO 15500-19:2001)

ISO/FDIS 15501-1   *   Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements            2012-03-11
                       (Revision of ISO 15501-1:2001)

TC 38                  Textiles

ISO/FDIS 6330      *   Textiles — Domestic washing and drying procedures for textile testing                              2012-03-20
                       (Revision of ISO 6330:2000, ISO 6330:2000/Amd 1:2008)

TC 39                  Machine tools

ISO/FDIS 26303     *   Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine   2012-03-26
                       tools

TC 43                  Acoustics

ISO                *   Acoustics — Measurements of sound pressure level emitted by stationary road vehicles —             2012-03-28
5130:2007/FDAmd        Amendment 1
1

TC 44                  Welding and allied processes

ISO/FDIS 16834     *   Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of    2012-03-13
                       high strength steels — Classification
                       (Revision of ISO 16834:2006)

ISO/FDIS 21952     *   Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of      2012-03-13
                       creep-resisting steels — Classification
                       (Revision of ISO 21952:2007)

ISO/FDIS 24598     *   Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux             2012-03-13
                       combinations for submerged arc welding of creep-resisting steels — Classification
                       (Revision of ISO 24598:2007)

ISO/FDIS 17653     *   Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance   2012-03-20
                       spot welds
                       (Revision of ISO 17653:2003)

TC 67                  Materials, equipment and offshore structures for petroleum, petrochemical and
                       natural gas industries

ISO/FDIS 12211     *   Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers                   2012-03-27

ISO/FDIS 12212     *   Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers                   2012-03-27

TC 76                  Transfusion, infusion and injection, and blood processing equipment for medical
                       and pharmaceutical use

ISO/FDIS 11040-6   *   Prefilled syringes — Part 6: Plastic barrels for injectables                                         2012-03-21

TC 83                  Sports and recreational equipment

ISO                *   Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system — Amendment 1       2012-03-07
11088:2006/FDAm
d1

TC 84                  Devices for administration of medicinal products and intravascular catheters

ISO/FDIS 11608-1   *   Needle-based injection systems for medical use — Requirements and test methods — Part 1:             2012-03-13
                       Needle-based injection systems
                       (Revision of ISO 11608-1:2000)

ISO/FDIS 11608-2   *   Needle-based injection systems for medical use — Requirements and test methods — Part 2:             2012-03-13
                       Needles
                       (Revision of ISO 11608-2:2000)

TC 94                  Personal safety -- Protective clothing and equipment

ISO/FDIS 17491-1   *   Protective clothing — Test methods for clothing providing protection against chemicals — Part 1:     2012-03-07
                       Determination of resistance to outward leakage of gases (internal pressure test)

ISO/FDIS 17491-2   *   Protective clothing — Test methods for clothing providing protection against chemicals — Part 2:     2012-03-21
                       Determination of resistance to inward leakage of aerosols and gases (inward leakage test)

TC 106                 Dentistry

ISO/FDIS 21672-1   *   Dentistry — Periodontal probes — Part 1: General requirements                                        2012-03-13

TC 108                 Mechanical vibration, shock and condition monitoring

ISO/FDIS 2954      *   Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for      2012-03-14
                       measuring vibration severity
                       (Revision of ISO 2954:1975, ISO/NP 2954)

ISO/FDIS 13379-1   *   Condition monitoring and diagnostics of machines — Data interpretation and diagnostics               2012-03-21
                       techniques — Part 1: General guidelines
                       (Revision of ISO 13379:2003)

TC 112                 Vacuum technology

ISO/FDIS 21360-1   *   Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1:                 2012-03-25
                       General description
                       (Revision of ISO 21360:2007)

ISO/FDIS 21360-2   *   Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2:              2012-03-25
                       Positive displacement vacuum pumps
                       (Revision of ISO 1607-1:1993, ISO 1607-2:1989)

TC 131                 Fluid power systems

ISO/FDIS 1219-1    *   Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1:             2012-03-13
                       Graphical symbols for conventional use and data-processing applications
                       (Revision of ISO 1219-1:2006)

TC 135                 Non-destructive testing

ISO/FDIS 16810     *   Non-destructive testing — Ultrasonic testing — General principles                                 2012-03-10

ISO/FDIS 16811     *   Non-destructive testing — Ultrasonic testing — Sensitivity and range setting                      2012-03-10

ISO/FDIS 16831     *   Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic    2012-03-10
                       thickness measuring equipment

TC 147                 Water quality

ISO/FDIS 9308-2    *   Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 2: Most probable     2012-04-01
                       number method
                       (Revision of ISO 9308-2:1990)

TC 172                 Optics and photonics

ISO/FDIS 19980     *   Ophthalmic instruments — Corneal topographers                                                     2012-03-20
                       (Revision of ISO 19980:2005)

TC 194                 Biological evaluation of medical devices

ISO/FDIS 13022     *   Medical products containing viable human cells — Application of risk management and               2012-03-13
                       requirements for processing practices

TC 201                 Surface chemical analysis

ISO/FDIS 16129     *   Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the       2012-03-28
                       day-to-day performance of an X-ray photoelectron spectrometer

TC 217                 Cosmetics

ISO/FDIS 11930     *   Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product       2012-03-13

JTC 1                  Information technology

ISO/IEC FDIS       *   Information technology — Software asset management — Part 1: Processes and tiered                 2012-03-25
19770-1                assessment of conformance
                       (Revision of ISO/IEC 19770-1:2006)

ISO/IEC FDIS       *   Identification cards — Optical memory cards — Part 1: General characteristics                     2012-03-21
11693-1
                       (Revision of ISO/IEC 11693:2005)

ISO/IEC FDIS       *   Information technology — Security techniques — Information security management for inter-sector   2012-03-07
27010                  and inter-organizational communications

ISO/IEC FDIS       *   Information technology — Security techniques — Lightweight cryptography — Part 1: General         2012-03-17
29192-1

ISO/IEC 15444-     *   Information technology — JPEG 2000 image coding system: Wireless — Part 11: — Amendment           2012-03-25
11:2007/FDAmd 1        1: IP based wireless networks

ISO/IEC 21000-     *   Information technology — Multimedia framework (MPEG-21) — Part 4: Intellectual Property           2012-03-13
4:2006/FDAmd 2.2              Management and Protection Components — Amendment 2: Protection of presentation element

ISO/IEC FDIS          *       Information technology — User interfaces — Accessibility of personal computer hardware                     2012-03-17
29136




Standards published

New International Standards published between 01 January and 31 January 2012

* Available in English only

** French version of standard previously published in English only



                                                                                                                                         Price group

TC 4                          Rolling bearings

ISO 355:2007/Amd              Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations —                         XZ
1:2012                        Amendment 1

TC 6                          Paper, board and pulps

ISO 5628:2012                 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and            E
                              four-point methods

TC 20                         Aircraft and space vehicles

ISO 10502:2012        *       Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa —                 K
                              Technical specifications and requirements

TC 22                         Road vehicles

ISO 15006:2011                Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-             H
                              vehicle auditory presentation

TC 23                         Tractors and machinery for agriculture and forestry

ISO 11783-9:2012              Tractors and machinery for agriculture and forestry — Serial control and communications data network —              J
                              Part 9: Tractor ECU

TC 31                         Tyres, rims and valves

ISO 4251-                     Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre                    XZ
1:2005/Amd 1:2012             designation and dimensions, and approved rim contours — Amendment 1

TC 34                         Food products

ISO 11746:2012                Rice — Determination of biometric characteristics of kernels                                                        D

ISO/TS                        Fermented milks — Determination of titratable acidity — Potentiometric method                                       D
11869:2012

TC 37                         Terminology and other language and content resources
ISO 24617-1:2012    *   Language resource management — Semantic annotation framework (SemAF) — Part 1: Time and events               XC
                        (SemAF-Time, ISO-TimeML)

TC 42                   Photography

ISO 12231:2012      *   Photography — Electronic still picture imaging — Vocabulary                                                    Q

TC 43                   Acoustics

ISO 28961:2012      *   Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range     F
                        from 18 years to 25 years under free-field listening conditions

ISO 3382-3:2012         Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices                                H

ISO 10140-          *   Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application             XZ
1:2010/Amd 1:2012       rules for specific products — Amendment 1: Guidelines for the determination of the sound reduction index
                        of joints filled with fillers and or seals

TC 45                   Rubber and rubber products

ISO 14932:2012          Rubber compounding ingredients — Organic vulcanizing agents — Determination of organic peroxide                Q
                        content

TC 58                   Gas cylinders

ISO 11363-          *   Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1:                free
1:2010/Cor 2:2012       Specifications — Technical Corrigendum 2

TC 67                   Materials, equipment and offshore structures for petroleum, petrochemical and natural
                        gas industries

ISO 21457:2010          Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil        R
                        and gas production systems

ISO 13501:2011          Petroleum and natural gas industries — Drilling fluids — Processing equipment evaluation                       U

ISO 13705:2006          Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service             XC

TC 68                   Financial services

ISO 11568-2:2012    *   Financial services — Key management (retail) — Part 2: Symmetric ciphers, their key management and             N
                        life cycle

TC 76                   Transfusion, infusion and injection, and blood processing equipment for medical and
                        pharmaceutical use

ISO 11040-3:2012    *   Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges                                     C

ISO 11040-5:2012    *   Prefilled syringes — Part 5: Plunger stoppers for injectables                                                  C

TC 86                   Refrigeration and air-conditioning

ISO 23953-              Refrigerated display cabinets — Part 1: Vocabulary — Amendment 1                                              XZ
1:2005/Amd 1:2012

ISO 23953-              Refrigerated display cabinets — Part 2: Classification, requirements and test conditions — Amendment 1         T
2:2005/Amd 1:2012

TC 92                   Fire safety

ISO 834-            *   Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment          XZ
1:1999/Amd 1:2012       1

TC 94                   Personal safety -- Protective clothing and equipment

ISO 20347:2012          Personal protective equipment — Occupational footwear                                                          N

TC 106                  Dentistry

ISO 20126:2012          Dentistry — Manual toothbrushes — General requirements and test methods                                        F
TC 107                 Metallic and other inorganic coatings

ISO/TR             *   Metallic and other inorganic coatings — Evaluation of properties of dark-stain phenomenon of chromated       E
15922:2011             coiled or sheet product

TC 108                 Mechanical vibration, shock and condition monitoring

ISO 18312-1:2012   *   Mechanical vibration and shock — Measurement of vibration power flow from machines into connected            G
                       support structures — Part 1: Direct method

ISO 18312-2:2012   *   Mechanical vibration and shock — Measurement of vibration power flow from machines into connected            K
                       support structures — Part 2: Indirect method

TC 114                 Horology

ISO 10552:2012         Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions                                   E

TC 120                 Leather

ISO 14930:2012     *   Leather — Leather for dress gloves — Specification                                                           B

ISO 16131:2012     *   Leather — Upholstery leather characteristics — Selection of leather for furniture                            C

TC 121                 Anaesthetic and respiratory equipment

ISO 5360:2012          Anaesthetic vaporizers — Agent-specific filling systems                                                      L

TC 123                 Plain bearings

ISO 14287:2012     *   Plain bearings — Pad materials for tilting pad bearings                                                      C

TC 127                 Earth-moving machinery

ISO 15817:2012         Earth-moving machinery — Safety requirements for remote operator control systems                             E

TC 131                 Fluid power systems

ISO 16431:2012         Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled              D
                       systems

TC 138                 Plastics pipes, fittings and valves for the transport of fluids

ISO                *   Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of      XZ
8483:2003/Amd          bolted flange joints — Amendment 1
1:2012

ISO                *   Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal    XZ
15306:2003/Amd         pressure — Amendment 1
1:2012

TC 145                 Graphical symbols

ISO 7000:2012      *   Graphical symbols for use on equipment — Registered symbols                                                free

TC 146                 Air quality

ISO 13138:2012     *   Air quality — Sampling conventions for airborne particle deposition in the human respiratory system          J

ISO 15202-2:2012       Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively         T
                       coupled plasma atomic emission spectrometry — Part 2: Sample preparation

ISO 28902-1:2012       Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lidar       P

TC 147                 Water quality

ISO 29201:2012     *   Water quality — The variability of test results and the uncertainty of measurement of microbiological        V
                       enumeration methods

TC 150                 Implants for surgery

ISO 14242-1:2012       Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters      E
                        for wear-testing machines and corresponding environmental conditions for test

TC 156                  Corrosion of metals and alloys

ISO 9223:2012           Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and                  H
                        estimation

ISO 9224:2012           Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity                 G
                        categories

ISO 9225:2012           Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental                        L
                        parameters affecting corrosivity of atmospheres

ISO 9226:2012           Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of                 C
                        standard specimens for the evaluation of corrosivity

ISO 12696:2012          Cathodic protection of steel in concrete                                                                         S

ISO 17474:2012          Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion             G
                        testing

TC 165                  Timber structures

ISO 22389-2:2012    *   Timber structures - Bending applications of I-beams — Part 2: Component performance and                          D
                        manufacturing requirements

TC 171                  Document management applications

ISO 12651-1:2012    *   Electronic document management — Vocabulary — Part 1: Electronic document imaging                                 J

ISO 14641-1:2012    *   Electronic archiving — Part 1: Specifications concerning the design and the operation of an information          R
                        system for electronic information preservation

TC 172                  Optics and photonics

ISO 11979-              Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations — Amendment 1                         XZ
7:2006/Amd 1:2012

TC 190                  Soil quality

ISO 12914:2012          Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for the determination of         D
                        elements

ISO 11269-2:2012        Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of contaminated soil   K
                        on the emergence and early growth of higher plants

ISO/TS 29843-       *   Soil quality — Determination of soil microbial diversity — Part 2: Method by phospholipid fatty acid             D
2:2011                  analysis (PLFA) using the simple PLFA extraction method

TC 201                  Surface chemical analysis

ISO 11039:2012      *   Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate                                K

TC 204                  Intelligent transport systems

ISO 10711:2012      *   Intelligent Transport Systems — Interface Protocol and Message Set Definition between Traffic Signal             M
                        Controllers and Detectors

TC 205                  Building environment design

ISO 16817:2012          Building environment design — Indoor environment — Design process for visual environment                          L

TC 207                  Environmental management

ISO 14051:2011          Environmental management — Material flow cost accounting — General framework                                     R

TC 210                  Quality management and corresponding general aspects for medical devices

ISO/IEC Guide       *   Guide to the development and inclusion of safety aspects in International Standards for medical devices           L
63:2012
TC 211                  Geographic information/Geomatics

ISO 19142:2010          Geographic information — Web Feature Service                                                               XC

TC 218                  Timber

ISO 3129:2012       *   Wood — Sampling methods and general requirements for physical and mechanical testing of small clear          E
                        wood specimens

TC 219                  Floor coverings

ISO 10580:2010          Resilient, textile and laminate floor coverings — Test method for volatile organic compound (VOC)            K
                        emissions

ISO 10582:2010          Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification               D

ISO 10595:2010          Resilient floor coverings — Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles —          D
                        Specification

ISO 10874:2009          Resilient, textile and laminate floor coverings — Classification                                             B

ISO 24343-1:2007        Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1:     C
                        Residual indentation

ISO 26986:2010          Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification         D

TC 229                  Nanotechnologies

ISO/TR                  Nanotechnologies — Characterization of multiwall carbon nanotube (MWCNT) samples                             C
10929:2012

IULTCS                  International Union of Leather Technologists and Chemists Societies

ISO 2419:2012           Leather — Physical and mechanical tests — Sample preparation and conditioning                                B

ISO 14088:2012          Leather — Chemical tests — Quantitative analysis of tanning agents by filter method                          E

JTC 1                   Information technology

ISO/IEC 15504-      *   Information technology — Process assessment — Part 5: An exemplar software life cycle process              XC
5:2012                  assessment model

ISO/IEC             *   Identification cards — Physical characteristics — Amendment 2: Opacity                                      XZ
7810:2003/Amd
2:2012

ISO/IEC 13211-      *   Information technology — Programming languages — Prolog — Part 1: General core — Technical                 free
1:1995/Cor 2:2012       Corrigendum 2

ISO/IEC 29192-      *   Information technology — Security techniques — Lightweight cryptography — Part 2: Block ciphers              S
2:2012

ISO/IEC 23001-      *   Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base media             F
7:2012                  file format files

ISO/IEC 23007-      *   Information technology — Rich media user interfaces — Part 1: Widgets — Amendment 1: Widget                 XZ
1:2010/Amd 1:2012       extensions

ISO/IEC 18047-      *   Information technology — Radio frequency identification device conformance test methods — Part 2: Test       N
2:2012                  methods for air interface communications below 135 kHz

ISO/IEC             *   Information technology — Mobile item identification and management — Mobile AIDC application                 J
29179:2012              programming interface
ISO/IEC 19795-        *   Information technology — Biometric performance testing and reporting — Part 6: Testing methodologies   P
6:2012                    for operational evaluation




Standards confirmed

The following International Standards are confimred for a five year period:



TC 2                              Fasteners

ISO 8738:1986                     (reconfirmed)

ISO 8749:1986                     (reconfirmed)

TC 6                              Paper, board and pulps

ISO 11093-1:1994                  (reconfirmed)

ISO 11093-2:1994                  (reconfirmed)

ISO 11093-3:1994                  (reconfirmed)

ISO 3038:1975                     (reconfirmed)

TC 8                              Ships and marine technology

ISO 1069:1973                     (reconfirmed)

ISO 8468:2007

ISO 9875:2000                     (reconfirmed)

ISO 11606:2000                    (reconfirmed)

ISO 22554:2007

ISO 22555:2007

ISO 25861:2007

TC 10                             Technical product documentation

ISO 8048:1984                     (reconfirmed)

TC 17                             Steel

ISO 4995:2008

ISO 6932:2008

TC 20                             Aircraft and space vehicles
ISO 413:1974        (reconfirmed)

ISO 1021:1980       (reconfirmed)

ISO 4153:1981       (reconfirmed)

ISO 3282:1976       (reconfirmed)

TC 22               Road vehicles

ISO/TS 16951:2004   (reconfirmed)

ISO 7575:1993       (reconfirmed)

TC 23               Tractors and machinery for agriculture and forestry

ISO 5675:2008

ISO 21628:2008

ISO 7915:1991       (reconfirmed)

TC 24               Particle characterization including sieving

ISO 4782:1987       (reconfirmed)

ISO 4783-1:1989     (reconfirmed)

ISO 4783-2:1989     (reconfirmed)

ISO 7805-1:1984     (reconfirmed)

ISO 7805-2:1987     (reconfirmed)

ISO 7806:1983       (reconfirmed)

ISO 10630:1994      (reconfirmed)

ISO 14315:1997      (reconfirmed)

TC 34               Food products

ISO 3634:1979       (reconfirmed)

ISO 5520:1981       (reconfirmed)

ISO 6560:1983       (reconfirmed)

ISO 605:1991        (reconfirmed)

ISO 2164:1975       (reconfirmed)

ISO 6322-1:1996     (reconfirmed)

ISO 6820:1985       (reconfirmed)

ISO 7304-2:2008

ISO 488:2008

ISO 707:2008

ISO 2446:2008

ISO 9231:2008

ISO 20541:2008

ISO 6865:2000       (reconfirmed)

ISO 934:1980        (reconfirmed)

ISO 935:1988        (reconfirmed)

ISO 5555:2001       (reconfirmed)
ISO 6884:2008

ISO 8294:1994        (reconfirmed)

ISO 15301:2001       (reconfirmed)

ISO 15303:2001       (reconfirmed)

TC 38                Textiles

ISO 9073-5:2008

TC 44                Welding and allied processes

ISO 6520-2:2001      (reconfirmed)

TC 58                Gas cylinders

ISO 32:1977          (reconfirmed)

ISO 13769:2007

TC 69                Applications of statistical methods

ISO 5725-1:1994      (reconfirmed)

ISO 5725-6:1994      (reconfirmed)

TC 79                Light metals and their alloys

ISO 22960:2008

ISO 22961:2008

ISO 22962:2008

ISO 22963:2008

TC 92                Fire safety

ISO/TR 5925-2:2006

TC 94                Personal safety -- Protective clothing and equipment

ISO 17491-3:2008

ISO 17491-4:2008

TC 100               Chains and chain sprockets for power transmission and conveyors

ISO 6973:1986        (reconfirmed)

ISO 9633:2001        (reconfirmed)

TC 106               Dentistry

ISO 15854:2005

ISO 20795-1:2008

TC 111               Round steel link chains, chain slings, components and accessories

ISO 3077:2001        (reconfirmed)

TC 118               Compressors and pneumatic tools, machines and equipment

ISO 10440-1:2007

ISO 5393:1994        (reconfirmed)

TC 119               Powder metallurgy
ISO 3923-1:2008

ISO 4490:2008

TC 121              Anaesthetic and respiratory equipment

ISO 5364:2008

TC 131              Fluid power systems

ISO 6022:2006

ISO 3968:2001       (reconfirmed)

ISO 11500:2008

ISO 4412-1:1991     (reconfirmed)

ISO 4412-2:1991     (reconfirmed)

ISO 4412-3:1991     (reconfirmed)

ISO 15086-1:2001    (reconfirmed)

TC 146              Air quality

ISO 13752:1998      (reconfirmed)

TC 147              Water quality

ISO 10705-1:1995    (reconfirmed)

ISO 10705-4:2001    (reconfirmed)

TC 155              Nickel and nickel alloys

ISO 7520:1985       (reconfirmed)

ISO 7525:1985       (reconfirmed)

ISO 7530-1:1990     (reconfirmed)

ISO 8343:1985       (reconfirmed)

TC 159              Ergonomics

ISO 10075-2:1996    (reconfirmed)

ISO 7250-1:2008

ISO 1503:2008

ISO 9241-171:2008

TC 171              Document management applications

ISO 8514-1:2000     (reconfirmed)

ISO 8514-2:2000     (reconfirmed)

ISO 11698-1:2000    (reconfirmed)

ISO 11698-2:2000    (reconfirmed)

ISO 11928-1:2000    (reconfirmed)

ISO 11928-2:2000    (reconfirmed)

ISO 12653-1:2000    (reconfirmed)

ISO 12653-2:2000    (reconfirmed)

TC 185              Safety devices for protection against excessive pressure
ISO 4126-9:2008

JTC 1                             Information technology

ISO/IEC 1539-2:2000               (reconfirmed)

ISO/IEC 13211-2:2000              (reconfirmed)

ISO/IEC 14515-1:2000              (reconfirmed)

ISO/IEC ISP 15287-2:2000          (reconfirmed)

ISO/IEC 23270:2006

ISO/IEC 13250-2:2006




Standards withdrawn

Period from 01 January to 31 January 2012



TC 34                               Food products

ISO 11869:1997                      (replaced by ISO/TS 11869:2012)

TC 131                              Fluid power systems

ISO/TS 16431:2002                   (replaced by ISO 16431:2012)

CASCO                               Committee on conformity assessment

ISO/IEC 17021:2006                  (replaced by )

JTC 1                               Information technology

ISO/IEC 6592:2000                   (replaced by ISO/IEC 26514:2008)

ISO/IEC 18019:2004                  (replaced by ISO/IEC 26514:2008)

ISO/IEC TR 18047-2:2006             (replaced by ISO/IEC 18047-2:2012)




Meeting calendar

(update at 01 January 2012)

Meetings called for the month of December are not in this edition.
* Information definite but meeting not yet formally convened

** Provisional



January-February 2012

30-4    Paris (France)          TC 236         Project Committee: Project Management

February 2012

1       Bangkok                 TC 123/SC 2    Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
        (Thailand)                             conditions

1       Bangkok                 TC 123/SC 3    Plain bearings/Dimensions, tolerances and construction details
        (Thailand)

1-9     Charlotte (USA)         TC 213         Dimensional and geometrical product specifications and verification

2       Bangkok                 TC 123/SC 5    Plain bearings/Quality analysis and assurance
        (Thailand)

2       Bangkok                 TC 123/SC 6    Plain bearings/Terms and common items
        (Thailand)

2       Paris (France)          TC 258         Project, programme and portfolio management

3       Bangkok                 TC 123         Plain bearings
        (Thailand)

3       Bangkok                 TC 123/SC 7    Plain bearings/Special types of plain bearings
        (Thailand)

6       Pretoria (South         TC 251         Project committee: Asset management
        Africa)

8       St. Petersburg,    *    TC 115         Pumps
        Florida (USA)

8-10    London (United          TC 8/SC 8      Ships and marine technology/Ship design
        Kingdom)

10      Berlin (Germany)        TC 22/SC 21    Road vehicles/Electrically propelled road vehicles

13-14   Orlando (USA)           TC 184/SC 2    Automation systems and integration/Robots and robotic devices

13-14   Orlando (USA)           TC 219         Floor coverings

13-17   Dublin (Ireland)        TC 262         Project committee: Risk management

15-16   Orlando (USA)      **   TC 184         Automation systems and integration

15-16   Geneva                  TMB            Technical Management Board
        (Switzerland)

20-24   Guangzhou               JTC 1/SC 6     Information technology/Telecommunications and information exchange between systems
        (China)

20-24   Johannesburg            TC 241         Project Committee: Road-Traffic Safety Management System
        (South Africa)

20-25   Kyoto (Japan)           JTC 1/SC 35    Information technology/User interfaces

21      Paris (France)          TC 23/SC 2     Tractors and machinery for agriculture and forestry/Common tests

21-23   Nara (Japan)            TC 172/SC 9    Optics and photonics/Electro-optical systems

22-23   Courbevoie,             TC 23/SC 14    Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other
        Paris (France)                         displays, operator manuals

24      Kuala Lumpur            TC 22/SC 22    Road vehicles/Motorcycles
        (Malaysia)
February-March 2012

28-2    Berlin (Germany)        TC 107        Metallic and other inorganic coatings

March 2012

7-8     Geneva                  TC 110        Industrial trucks
        (Switzerland)

12-14   Frankfurt               TC 39/SC 4    Machine tools/Woodworking machines
        (Germany)

13-16   Milan (Italy)           TC 172/SC 7   Optics and photonics/Ophthalmic optics and instruments

14      Kyoto (Japan)           TC 31/SC 3    Tyres, rims and valves/Passenger car tyres and rims

14      Kyoto (Japan)           TC 31/SC 10   Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

15      Kyoto (Japan)           TC 31         Tyres, rims and valves

19-21   Paris (France)          TC 96/SC 10   Cranes/Design principles and requirements

20-21   London (United          TC 22/SC 1    Road vehicles/Ignition equipment
        Kingdom)

20-23   Buenos Aires            JTC 2         Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
        (Argentina)

26-28   Charlotte (USA)         TC 23/SC 17   Tractors and machinery for agriculture and forestry/Manually portable forest machinery

29      Frankfurt               TC 23/SC 19   Tractors and machinery for agriculture and forestry/Agricultural electronics
        (Germany)

29      Kuala Lumpur            TC 104/SC 4   Freight containers/Identification and communication
        (Malaysia)

29-30   Charlotte (USA)         TC 23/SC 13   Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment

April 2012

16      Durban (South           TC 135/SC 9   Non-destructive testing/Acoustic emission testing
        Africa)

16-17   Graz (Austria)          TC 24/SC 4    Particle characterization including sieving/Particle characterization

16-20   La Plaine St-      *    TC 198        Sterilization of health care products
        Denis (France)

16-20   Melbourne          **   TC 204        Intelligent transport systems
        (Australia)

16-20   Chicago (USA)           TC 248        Project committee: Sustainability criteria for bioenergy

17      Senlis (France)    **   TC 117        Fans

17      Durban (South           TC 135/SC 3   Non-destructive testing/Ultrasonic testing
        Africa)

17      Durban (South           TC 135/SC 5   Non-destructive testing/Radiation methods
        Africa)

18      Milan (Italy)           TC 44/SC 9    Welding and allied processes/Health and safety

18      Durban (South      *    TC 135/SC 2   Non-destructive testing/Surface methods
        Africa)

18      Durban (South      *    TC 135/SC 6   Non-destructive testing/Leak detection methods
        Africa)

18      Durban (South           TC 135/SC 8   Non-destructive testing/Infrared thermography for non-destructive testing
        Africa)
18      Glasgow,                TC 161        Control and protective devices for gas and/or oil burners and appliances
        Scotland (United
        Kingdom)

19      Durban (South           TC 135/SC 7   Non-destructive testing/Personnel qualification
        Africa)

19-20   Toulouse                TC 34/SC 12   Food products/Sensory analysis
        (France)

20      Deerfield (USA)         TC 84         Devices for administration of medicinal products and intravascular catheters

20      Durban (South      *    TC 135        Non-destructive testing
        Africa)

23-26   Prague (Czech           TC 83/SC 5    Sports and recreational equipment/Ice hockey equipment and facilities
        Republic)

23-26   Cape Town          **   TC 102        Iron ore and direct reduced iron
        (South Africa)

23-27   Oslo (Norway)      **   TC 59/SC 14   Buildings and civil engineering works/Design life

23-27   Winterthur              TC 108/SC 2   Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
        (Switzerland)                         vibration and shock as applied to machines, vehicles and structures

25      Yokohama           *    TC 4/SC 4     Rolling bearings/Tolerances, tolerance definitions and symbols (including GPS)
        (Japan)

26-27   Nairobi (Kenya)         TC 34         Food products

26-27   Moscow                  TC 67/SC 2    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Russian                              industries/Pipeline transportation systems
        Federation)

26-27   Vienna (Austria)        TC 159        Ergonomics

27      Yokohama                TC 4/SC 12    Rolling bearings/Ball bearings
        (Japan)

27      Volos (Greece)     **   TC 92/SC 4    Fire safety/Fire safety engineering

May 2012

1-4     Jeju (Korea,       *    TC 28         Petroleum products and lubricants
        Republic of)

2       Jeju (Korea,       *    TC 28/SC 5    Petroleum products and lubricants/Measurement of refrigerated hydrocarbon and non-petroleum
        Republic of)                          based liquefied gaseous fuels

3       Dublin (Ireland)   **   TC 242        Energy Management

6-9     Vancouver          *    TC 215        Health informatics
        (Canada)

7       Ittigen                 TC 113/SC 1   Hydrometry/Velocity area methods
        (Switzerland)

7-10    Berlin (Germany)        TC 22/SC 13   Road vehicles/Ergonomics applicable to road vehicles

7-11    Berlin (Germany)   **   TC 46         Information and documentation

7-11    Berlin (Germany)        TC 46/SC 4    Information and documentation/Technical interoperability

7-11    Berlin (Germany)   *    TC 46/SC 11   Information and documentation/Archives/records management

7-11    Ittigen                 TC 113        Hydrometry
        (Switzerland)

8       Ittigen                 TC 113/SC 5   Hydrometry/Instruments, equipment and data management
        (Switzerland)
8-10    Sydney                  TC 145/SC 1   Graphical symbols/Public information symbols
        (Australia)

9       Berlin (Germany)   **   TC 44/SC 9    Welding and allied processes/Health and safety

9       Sydney                  TC 145/SC 2   Graphical symbols/Safety identification, signs, shapes, symbols and colours
        (Australia)

9-10    Haifa (Israel)          TC 184/SC 5   Automation systems and integration/Interoperability, integration, and architectures for enterprise
                                              systems and automation applications

10      Berlin (Germany)        TC 24/SC 8    Particle characterization including sieving/Test sieves, sieving and industrial screens

10      Chicago (USA)      *    TC 68         Financial services

10      Chicago (USA)      **   TC 68         Financial services

10      Ittigen                 TC 113/SC 6   Hydrometry/Sediment transport
        (Switzerland)

10      Ittigen                 TC 113/SC 8   Hydrometry/Ground water
        (Switzerland)

10      Sydney                  TC 145        Graphical symbols
        (Australia)

10      Stockholm               TC 238        Solid biofuels
        (Sweden)

11      Berlin (Germany)        TC 24         Particle characterization including sieving

14-15   Stockholm          *    JTC 1/SC 27   Information technology/IT Security techniques
        (Sweden)

14-15   Rio de Janeiro     **   TC 67/SC 4    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Brazil)                              industries/Drilling and production equipment

14-17   Nadi (Fiji)        *    COPOLCO       Committee on consumer policy

14-18   Campos do               TC 20/SC 14   Aircraft and space vehicles/Space systems and operations
        Jordão (Brazil)

14-18   Hangzhou           *    TC 39/SC 2    Machine tools/Test conditions for metal cutting machine tools
        (China)

15-16   Luzern                  TC 23/SC 3    Tractors and machinery for agriculture and forestry/Safety and comfort
        (Switzerland)

15-16   Paris (France)          TC 259        Project committee: Outsourcing

15-17   Buenos Aires            TC 67/SC 5    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Argentina)                           industries/Casing, tubing and drill pipe

16      Milan (Italy)      *    TC 136        Furniture

17      Orlando (USA)           TC 10/SC 6    Technical product documentation/Mechanical engineering documentation

18      Orlando (USA)           TC 10         Technical product documentation

20-25   Jeju (Korea,       *    JTC 1/SC 7    Information technology/Software and systems engineering
        Republic of)

21-24   Daejon (Korea,     *    TC 249        Traditional chinese medicine
        Republic of)

21-25   Berlin (Germany)   **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

21-25   Mississauga        *    TC 171        Document management applications
        (Canada)

22      Delft              **   TC 195        Building construction machinery and equipment
        (Netherlands)
22      Delft              *    TC 195/SC 1   Building construction machinery and equipment/Machinery and equipment for concrete work
        (Netherlands)

23      Tokyo (Japan)           TC 173/SC 7   Assistive products for persons with disability/Accessible design

23-24   Düsseldorf         *    TC 44/SC 10   Welding and allied processes/Unification of requirements in the field of metal welding
        (Germany)

24      Seoul (Korea,           TC 122/SC 4   Packaging/Packaging and Environment
        Republic of)

24      Tokyo (Japan)      **   TC 173        Assistive products for persons with disability

24-25   Paris (France)     *    TC 17/SC 3    Steel/Steels for structural purposes

25      Seoul (Korea,      **   TC 44/SC 12   Welding and allied processes/Soldering materials
        Republic of)

25      Delft              *    TC 195        Building construction machinery and equipment
        (Netherlands)

25      Seoul (Korea,      **   TC 228        Tourism and related services
        Republic of)

May-June 2012

28-1    Helsinki           **   TC 35         Paints and varnishes
        (Finland)

28-1    Helsinki           **   TC 35/SC 9    Paints and varnishes/General test methods for paints and varnishes
        (Finland)

28-1    Helsinki           **   TC 35/SC 12   Paints and varnishes/Preparation of steel substrates before application of paints and related
        (Finland)                             products

28-1    Helsinki           **   TC 35/SC 14   Paints and varnishes/Protective paint systems for steel structures
        (Finland)

31-1    Paris (France)     *    TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

31-1    London (United          TC 67/SC 6    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        Kingdom)                              industries/Processing equipment and systems

June 2012

4       Paris (France)     *    TC 85/SC 2    Nuclear energy, nuclear technologies, and radiological protection/Radiological protection

4-5     Berlin (Germany)   **   TC 44/SC 3    Welding and allied processes/Welding consumables

4-7     Paris (France)     *    TC 85/SC 5    Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle

4-7     Paris (France)     *    TC 85/SC 6    Nuclear energy, nuclear technologies, and radiological protection/Reactor technology

7       Berlin (Germany)        TC 44/SC 7    Welding and allied processes/Representation and terms

8       Paris (France)          TC 85         Nuclear energy, nuclear technologies, and radiological protection

9       Berlin (Germany)   *    TC 96         Cranes

10-15   Stockholm          *    TC 184/SC 4   Automation systems and integration/Industrial data
        (Sweden)

11-13   Woods Hole              TC 43/SC 3    Acoustics/Underwater acoustics
        (USA)

11-13   Dresden            *    TC 126        Tobacco and tobacco products
        (Germany)

11-15   Kyoto (Japan)           TC 121        Anaesthetic and respiratory equipment

11-15   Kyoto (Japan)      **   TC 121/SC 1   Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines

11-15   Stresa (Italy)     **   TC 229        Nanotechnologies
11-15   Prague (Czech      **   TC 251        Project committee: Asset management
        Republic)

11-16   La Plaine St-      *    TC 147        Water quality
        Denis (France)

12-13   (France)           **   TC 17/SC 17   Steel/Steel wire rod and wire products

13      Paris (France)     *    TC 147/SC 3   Water quality/Radiological methods

13-14   Geneva             *    TMB           Technical Management Board
        (Switzerland)

14      Westminster,       **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        Colorado (USA)                        industries/Drilling and completion fluids, and well cements

14      Brugge             **   TC 86/SC 6    Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
        (Belgium)

14-15   (Europe)           **   TC 91         Surface active agents

16-22   Tokyo (Japan)      **   TC 69         Applications of statistical methods

17-24   Kruger Park        *    TC 110/SC 4   Industrial trucks/Rough-terrain trucks
        (South Africa)

18-20   Yangzhou                TC 100        Chains and chain sprockets for power transmission and conveyors
        (China)

19-22   Vienna (Austria)   *    REMCO         Committee on reference materials

20-21   Paris (France)     *    TC 17/SC 11   Steel/Steel castings

20-21   Milan (Italy)      **   TC 29/SC 10   Small tools/Assembly tools for screws and nuts, pliers and nippers

22      Porto (Portugal)   *    TC 87         Cork

24-29   Madrid (Spain)     *    TC 37         Terminology and other language and content resources

24-30   Bangkok            *    TC 207        Environmental management
        (Thailand)

25-29   Brussels           *    TC 34/SC 9    Food products/Microbiology
        (Belgium)

25-29   Madrid (Spain)     *    TC 37/SC 2    Terminology and other language and content resources/Terminographical and lexicographical
                                              working methods

25-29   St Paul,           *    TC 94/SC 6    Personal safety -- Protective clothing and equipment/Eye and face protection
        Minnesota (USA)

25-29   Buffalo (USA)           TC 108        Mechanical vibration, shock and condition monitoring

25-29   Buffalo (USA)      *    TC 108/SC 3   Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
                                              measuring instruments

26-27   Düsseldorf         *    TC 17/SC 9    Steel/Tinplate and blackplate
        (Germany)

26-27   Berlin (Germany)        TC 153/SC 2   Valves/Valve actuator attachment

28      Buffalo (USA)      *    TC 108/SC 6   Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems

29      Paris (France)     *    TC 44/SC 6    Welding and allied processes/Resistance welding and allied mechanical joining

29      Oranjewoud         *    TC 188        Small craft
        (Netherlands)

        (Unknown)          **   TC 171/SC 1   Document management applications/Quality

        (Unknown)          **   TC 171/SC 2   Document management applications/Application issues

        (Unknown)          **   TC 171/SC 3   Document management applications/General issues
        (Canada)           **   TC 171/SC 3   Document management applications/General issues

2nd Quarter 2012

        (France)           **   TC 211        Geographic information/Geomatics

July 2012

16      Denver (USA)       *    TC 44/SC 10   Welding and allied processes/Unification of requirements in the field of metal welding

18      Denver (USA)       **   TC 44/SC 11   Welding and allied processes/Qualification requirements for welding and allied processes
                                              personnel

18-19   Berlin (Germany)   *    TC 261        Additive manufacturing

19-20   Denver (USA)       **   TC 44         Welding and allied processes

20      Lancaster (USA)    **   TC 43/SC 2    Acoustics/Building acoustics

21      Stockholm          **   JTC 1/SC 29   Information technology/Coding of audio, picture, multimedia and hypermedia information
        (Sweden)

August 2012

22-24   Berlin (Germany)   *    TC 212        Clinical laboratory testing and in vitro diagnostic test systems

27-31   Montreal           **   JTC 1/SC 35   Information technology/User interfaces
        (Canada)

September 2012

3-7     La Rochelle        **   TC 163        Thermal performance and energy use in the built environment
        (France)

3-7     La Rochelle        **   TC 205        Building environment design
        (France)

7       Zurich             **   TC 142        Cleaning equipment for air and other gases
        (Switzerland)

8-16    Busan (Korea,      *    JTC 1/SC 36   Information technology/Information technology for learning, education and training
        Republic of)

10      Milan (Italy)      *    TC 21/SC 2    Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

10-11   Geneva             *    JTC 1/SC 22   Information technology/Programming languages, their environments and system software
        (Switzerland)                         interfaces

10-12   Shandong           *    TC 206        Fine ceramics
        (China)

10-14   Nancy (France)          TC 108/SC 4   Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
                                              and shock

10-14   La Plaine St-      *    TC 153/SC 1   Valves/Design, manufacture, marking and testing
        Denis (France)

14      Beijing (China)    *    TC 23/SC 6    Tractors and machinery for agriculture and forestry/Equipment for crop protection

17-21   Stockholm          **   TC 165        Timber structures
        (Sweden)

18-20   Berlin (Germany)   *    TC 122        Packaging

19-20   Rio de Janeiro     *    TC 67         Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Brazil)                              industries

19-21   San Diego (USA) **      GA            General Assembly

22      San Diego (USA) **      COUNCIL       Council

23-26   Rio de Janeiro     **   TC 164/SC 3   Mechanical testing of metals/Hardness testing
        (Brazil)
24-25   Ottawa (Canada)    *    TAG 8         Building

24-25   Rio de Janeiro     **   TC 164/SC 4   Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
        (Brazil)

24-26   Sydney             *    TC 54         Essential oils
        (Australia)

24-28   Stockholm          **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)
        (Sweden)

24-28   Vienna (Austria)   **   TC 215        Health informatics

25-26   Rio de Janeiro     **   TC 164/SC 2   Mechanical testing of metals/Ductility testing
        (Brazil)

25-27   Rio de Janeiro     **   TC 164/SC 5   Mechanical testing of metals/Fatigue testing
        (Brazil)

27      Rio de Janeiro     **   TC 164/SC 1   Mechanical testing of metals/Uniaxial testing
        (Brazil)

28      Rio de Janeiro     **   TC 164        Mechanical testing of metals
        (Brazil)

        Milan (Italy)      **   TC 21/SC 3    Equipment for fire protection and fire fighting/Fire detection and alarm systems

        Milan (Italy)      **   TC 21/SC 6    Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
                                              using foam and powder

        Milan (Italy)      **   TC 21/SC 8    Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

        (Korea, Republic   **   TC 133        Sizing systems and designations for clothes
        of)

        Cadiz (Spain)      **   TC 213        Dimensional and geometrical product specifications and verification

        Rotorua (New       **   TC 218        Timber
        Zealand)

        (Switzerland)      **   TC 226        Materials for the production of primary aluminium

September-October 2012

30-6    Paris (France)     *    TC 106        Dentistry

3rd Quarter 2012

        Frankfurt          **   TC 184/SC 1   Automation systems and integration/Physical device control
        (Germany)

        Berlin (Germany)   **   TC 254        Safety of amusement rides and amusement devices

October 2012

1-2     Ottawa (Canada)    *    TC 34/SC 11   Food products/Animal and vegetable fats and oils

3       Ottawa (Canada)    *    TC 34/SC 2    Food products/Oleaginous seeds and fruits and oilseed meals

5       Berlin (Germany)   *    TC 79/SC 2    Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

6       Chicago (USA)      *    TC 130        Graphic technology

8-12    (USA)              **   TC 154        Processes, data elements and documents in commerce, industry and administration

9-10    Montreal           *    TC 199        Safety of machinery
        (Canada)

10-11   Berlin (Germany)   *    TC 167        Steel and aluminium structures

10-12   Munich             *    TC 172/SC 6   Optics and photonics/Geodetic and surveying instruments
        (Germany)
11-12   Bogota             *    CASCO         Committee on conformity assessment
        (Colombia)

11-12   Tokyo (Japan)      *    TC 119        Powder metallurgy

14-18   Tokyo (Japan)      **   TC 10/SC 8    Technical product documentation/Construction documentation

14-19   Tokyo (Japan)      **   TC 59         Buildings and civil engineering works

14-19   Praia do Forte          TC 127        Earth-moving machinery
        (Brazil)

15      Sydney             **   TC 2/SC 7     Fasteners/Reference standards
        (Australia)

15-19   Montreal           *    TC 6          Paper, board and pulps
        (Canada)

15-19   Riccione (Italy)   *    TC 45         Rubber and rubber products

15-19   Riccione (Italy)   *    TC 45/SC 1    Rubber and rubber products/Hoses (rubber and plastics)

15-19   Riccione (Italy)   **   TC 45/SC 4    Rubber and rubber products/Products (other than hoses)

15-19   Amsterdam          *    TC 146        Air quality
        (Netherlands)

16      Sydney             **   TC 2/SC 11    Fasteners/Fasteners with metric external thread
        (Australia)

17      Sydney             **   TC 2/SC 14    Fasteners/Surface coatings
        (Australia)

17      (Korea, Republic   **   TC 17/SC 7    Steel/Methods of testing (other than mechanical tests and chemical analysis)
        of)

17      Berlin (Germany)   *    TC 22/SC 9    Road vehicles/Vehicle dynamics and road-holding ability

17-19   Guilin (China)     *    TC 202        Microbeam analysis

18      Sydney             **   TC 2/SC 12    Fasteners/Fasteners with metric internal thread
        (Australia)

18      Riccione (Italy)   *    TC 45/SC 2    Rubber and rubber products/Testing and analysis

18      Berlin (Germany)   **   TC 83         Sports and recreational equipment

18-19   (Korea, Republic   **   TC 17         Steel
        of)

19      Sydney             **   TC 2          Fasteners
        (Australia)

19      Riccione (Italy)   *    TC 45/SC 3    Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

21-26   Sapporo (Japan)    *    TC 92         Fire safety

21-26   Sapporo (Japan)    *    TC 92/SC 1    Fire safety/Fire initiation and growth

21-26   Sapporo (Japan)    **   TC 92/SC 2    Fire safety/Fire containment

21-26   Sapporo (Japan)    **   TC 92/SC 3    Fire safety/Fire threat to people and environment

22-26   (Japan)            **   TC 181        Safety of toys

22-27   Jeju (Korea,            TC 94/SC 15   Personal safety -- Protective clothing and equipment/Respiratory protective devices
        Republic of)

23      Sydney             **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
        (Australia)                           and drainage (including land drainage)

24      Sydney             **   TC 138/SC 2   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
        (Australia)                           supplies

24      Sydney             **   TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
        (Australia)                           of gaseous fuels

25      Sydney             **   TC 138/SC 3   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
        (Australia)                           applications

25      Sydney             **   TC 138/SC 5   Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
        (Australia)                           valves of plastic materials and their accessories -- Test methods and basic specifications

25      Sydney             **   TC 138/SC 6   Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
        (Australia)                           all applications

25      Sydney             **   TC 138/SC 7   Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
        (Australia)                           plastics materials

25-26   Tampa, Florida     **   TC 112        Vacuum technology
        (USA)

25-27   Florida (USA)      **   TC 201        Surface chemical analysis

26      Sydney             **   TC 138        Plastics pipes, fittings and valves for the transport of fluids
        (Australia)

        Messina (Italy)    **   TC 8          Ships and marine technology

        (USA)              **   TC 36         Cinematography

        (France)           **   TC 70/SC 7    Internal combustion engines/Tests for lubricating oil filters

        Yokohama           **   TC 119/SC 3   Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding
        (Japan)                               hardmetals)

October-November 2012

29-1    Saitama (Japan)         TC 34/SC 17   Food products/Management systems for food safety

31-7    Orlando (USA)      *    TC 23/SC 18   Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

November 2012

5       Berlin (Germany)   *    TC 79/SC 2    Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

5-8     Warsaw (Poland)    *    TC 98         Bases for design of structures

5-10    Jeju (Korea,       **   JTC 1         Information technology
        Republic of)

6-8     Tokyo (Japan)      *    TC 17/SC 1    Steel/Methods of determination of chemical composition

12      (Japan)            **   TC 244        Industrial furnaces and associated processing equipment

15-16   Xian (China)       **   TC 227        Springs

26-27   London (United     *    TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes
        Kingdom)

26-30   Florianopolis      *    TC 43         Acoustics
        (Brazil)

26-30   Florianopolis      *    TC 43/SC 1    Acoustics/Noise
        (Brazil)

27-29   Washington, D.C    *    TC 20         Aircraft and space vehicles
        (USA)

        (Korea, Republic   **   TC 23/SC 7    Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
        of)

        Wiesbaden          **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Germany)                             industries/Drilling and completion fluids, and well cements

        (USA)              **   TC 118/SC 6   Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
                                              systems
        Kyoto (Japan)     **   TC 159/SC 4   Ergonomics/Ergonomics of human-system interaction

        (Mexico)          **   TC 229        Nanotechnologies

4th Quarter 2012

        (Saudi Arabia)    **   TC 211        Geographic information/Geomatics

Month unknown 2012

        (Europe)          **   JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                             representation

        Chicago (USA)     **   TC 68/SC 4    Financial services/Securities and related financial instruments

        (Europe)          **   TC 146/SC 6   Air quality/Indoor air

        (Finland)         **   TC 190        Soil quality

January 2013

        (Unknown)         **   TC 34/SC 16   Food products/Horizontal methods for molecular biomarker analysis

February 2013

4-8     (Unknown)         **   TC 58/SC 4    Gas cylinders/Operational requirements for gas cylinders

February-March 2013

25-1    (South America)   **   JTC 1/SC 35   Information technology/User interfaces

April 2013

10-11   Helsinki          **   TC 117        Fans
        (Finland)

        Paris (France)    **   TC 29/SC 5    Small tools/Grinding wheels and abrasives

        (USA)             **   TC 178        Lifts, escalators and moving walks

May 2013

13-16   Chicago (USA)     **   TC 195        Building construction machinery and equipment

13-17   (Italy)           **   TC 29         Small tools

13-17   (Italy)           **   TC 29/SC 8    Small tools/Tools for pressing and moulding

13-17   Guangzhou         *    TC 68         Financial services
        (China)

13-17   Guangzhou         *    TC 68/SC 2    Financial services/Financial Services, security
        (China)

27-31   Shanghai          **   TC 4          Rolling bearings
        (China)

        Ottawa (Canada)   **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

        (China)           **   TC 10         Technical product documentation

        Paris (France)    **   TC 46/SC 11   Information and documentation/Archives/records management

        (Unknown)         **   TC 158        Analysis of gases

June 2013

        Washington, D.C   **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (USA)                                industries/Drilling and completion fluids, and well cements

2nd Quarter 2013
        (Canada)            **   TC 34/SC 4    Food products/Cereals and pulses

August 2013

26-30   (South America)     **   JTC 1/SC 35   Information technology/User interfaces

September 2013

        (Korea, Republic    **   TC 17/SC 16   Steel/Steels for the reinforcement and prestressing of concrete
        of)

        (Unknown)           **   TC 21         Equipment for fire protection and fire fighting

        Victoria            **   TC 33         Refractories
        (Canada)

        (Korea, Republic    **   TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
        of)                                    conditions

        (Korea, Republic    **   TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
        of)

        (Korea, Republic    **   TC 123/SC 5   Plain bearings/Quality analysis and assurance
        of)

        (Korea, Republic    **   TC 123/SC 6   Plain bearings/Terms and common items
        of)

        (Korea, Republic    **   TC 123/SC 7   Plain bearings/Special types of plain bearings
        of)

        Tokyo (Japan)       **   TC 142        Cleaning equipment for air and other gases

October 2013

7       Istanbul (Turkey)   **   TC 38/SC 1    Textiles/Tests for coloured textiles and colorants

7-11    Istanbul (Turkey)   **   TC 38         Textiles

8       Istanbul (Turkey)   **   TC 38/SC 2    Textiles/Cleansing, finishing and water resistance tests

9       Istanbul (Turkey)   **   TC 38/SC 23   Textiles/Fibres and yarns

10      Istanbul (Turkey)   **   TC 38/SC 24   Textiles/Conditioning atmospheres and physical tests for textile fabrics

11      Garching            **   TC 60         Gears
        (Germany)

11      Garching            **   TC 60/SC 1    Gears/Nomenclature and wormgearing
        (Germany)

11      Garching            **   TC 60/SC 2    Gears/Gear capacity calculation
        (Germany)

        (France)            **   TC 111/SC 1   Round steel link chains, chain slings, components and accessories/Chains and chain slings

        Mexico (Mexico)     **   TC 113        Hydrometry

        (Japan)             **   TC 206        Fine ceramics

November 2013

10      Okinawa (Japan)     **   TC 201        Surface chemical analysis

        (France)            **   JTC 1         Information technology

4th Quarter 2013

        (Korea, Republic    **   TC 106        Dentistry
        of)

Month unknown 2013
     (Australia)         **   REMCO         Committee on reference materials

     (South Africa)      **   TC 27         Solid mineral fuels

     (South Africa)      **   TC 37         Terminology and other language and content resources

     (Unknown)           **   TC 38/SC 1    Textiles/Tests for coloured textiles and colorants

     (South Africa)      **   TC 44         Welding and allied processes

     (Korea, Republic    **   TC 107        Metallic and other inorganic coatings
     of)

     Porto de            **   TC 135/SC 9   Non-destructive testing/Acoustic emission testing
     Galinhas (Brazil)

     (Norway)            **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
                                            and drainage (including land drainage)

     (Brazil)            **   TC 155        Nickel and nickel alloys

     (Sweden)            **   TC 163        Thermal performance and energy use in the built environment

     Amsterdam           **   TC 164/SC 5   Mechanical testing of metals/Fatigue testing
     (Netherlands)

     (Unknown)           **   TC 173/SC 2   Assistive products for persons with disability/Classification and terminology

     (South Africa)      **   TC 202        Microbeam analysis

     (Sweden)            **   TC 205        Building environment design

     (Portugal)          **   TC 228        Tourism and related services

     (South Africa)      **   TC 242        Energy Management

May 2014

     Washington, D.C     **   TC 46/SC 11   Information and documentation/Archives/records management
     (USA)

September 2014

     (South Africa)      **   TC 178        Lifts, escalators and moving walks

Month unknown 2014

     (USA)               **   REMCO         Committee on reference materials

     (Brazil)            **   TC 28         Petroleum products and lubricants

     Beijing (China)     **   TC 36         Cinematography

     (Germany)           **   TC 37         Terminology and other language and content resources

     (Japan)             **   TC 44         Welding and allied processes

     (USA)               **   TC 142        Cleaning equipment for air and other gases

Month unknown 2015

     (South Africa)      **   REMCO         Committee on reference materials

     (Finland)           **   TC 44         Welding and allied processes

     London (United      **   TC 142        Cleaning equipment for air and other gases
     Kingdom)

     (China)             **   TC 155        Nickel and nickel alloys
Month unknown 2016

     (Australia)     **   TC 44   Welding and allied processes

								
To top