Docstoc

Equipment Inventory_2012-01-06

Document Sample
Equipment Inventory_2012-01-06 Powered By Docstoc
					                                       Please contact our equipment provider SPX at 1-888-458-



                    Service Group
      Equipment
       Category                        4040 for all current pricing, equipment part number, and
                                                               availability.
No.




                                        See Notes at end of this spreadsheet for column description

                                                                      Description
1        R          07              AdBlue Kit: Suction pump, Trunk cover, Potentiometer
                                    Test Kit
                                    Suction pump
                                    Rear loadspace cover
2        R          07              Fuel gauge wrench
3        R          32              Alignment Inclinometer -
4        R          32              Data Transfer Station
5        R          32              M Class Adapter Front
6        R          32              M Class Adapter Rear
7        R          54              Hybrid Safety Kit: Gloves, Cones, Tape, Glasses, and Case
8        R          33              Toe Press Bar, Wheel Alignment
9        R        42/43(2) Brake Fluid Changer/Power Bleeder
10       R          27              Transmission Fill Station - Quantity 2 for new stores
                    27              Fill Station, 7-Gtronic Transmission - Filter element replacement
                    27              Fill Station, 7-Gtronic Transmission - Adapter
11       R          91              Occupant Classification Seat Weights p/n 211 589 00 32 00
12       R          82              Battery Tester Kit EXP 717 Battery Tester
13       R          82              Headlamp Adjusting Equipment (optical, non-contact)
14       R          42              ATE magnetic test card // wheel sensors and other magnetic segment tester
15       R          01              Borescope, Flexible Fiberscope (cold light source); cylinder evaluation
16       R         18(1)            Engine Oil Extractor/Suction Unit, Air Powered        (aboveground, mobile)
17       R         18(1)            SPRINTER Engine Oil Extractor/ Suction Tube Article no.: 40 401 130
18       R         13/20            Antifreeze Tester
19       R         15/54            Hot Air Gun (for Cable Harness Repair Kit)
20       R                          Lift Table; Power Train R & I (as of SLR, then 164, then 221)
21       R          67              Windshield Removal Kit / Roll Out 2004
22       R         15/54            Battery charger/battery tender ( PSC-550 55 A)
23       R         15/54            Battery charger/battery tender (Range: up to 20 A) Intellamatic III


24       R          07              Diesel Mixture Tester
25       R          40              TPMS; Tester for Tire Monitor Sensors MB 2000E
26      R           83              Nitrogen Pressure Testing Equipment
                                    Digital Multimeter (mA, A, V, Ohm) (recommended Fluke 289 with package cd
27       R         15/54            ROM / download cable Fluke -part number 289/FVF)
28       R          83              Refrigerant Recovery/Recycling/Recharging Station - R134a
29       R         40(1)            Tire Changer (for Alloy Wheels)
30       R         40(1)            Tire Changer (for Low Profile Tire/Wheels)
31       R         40(1)            Wheel Balancing Machine w/Road Force Capability
32       R         40(2)            Wheel Alignment MKS Console Package (w/ Sensors, Elec. Turnplates, etc.)
33       R         00(1)            Alignment Lift - 4-Post Type (for wheel alignment, MKS compliant + SLR)
34       R         00(1)            Alignment Lift - Scissors Type (for wheel alignment, MKS compliant + SLR)
35       R         00(1)            Two-Post Asymmetric (aboveground) Lift; 7,000lb capacity (+ SLR)
36       R         00(1)            Two-Post Asymmetric (aboveground) Lift; 10,000lb capacity
37       R         58(9)            Tool Organization/Storage for Required Tools (A- / B-)
38   R     01     Engine Assembly Stand (2000 lb. capacity)
39   R     01     Engine Hoist (2000 lb. capacity)
40   O            ETAS MTS 4100 NVH Analyzer
41   O     00     SLS elevating ramps for use with 2 Post lift - 2 sets need per vehicle
42   O     01     Stethoscope
43   O     01     Cylinder Leak Down Tester
44   O    58(2)   Hydraulic Press (manual), 25-ton
45   O   42/43(2) Brake Fluid Tester                                    (Special Equipment Order)
46   O    13/20   Coolant Drain Pan
47   O    15/54   Jumper Cable(25mm2 wire cross-section)
48   O    15/54   Battery Service Tools; terminal brush, puller, refill bottle, etc
49   O    15/54   Scopemeter / Labscope (digital)
50   O    15/54   Soldering station Soldering Iron
51   O    40(1)   Dial gauge for vertical and lateral runout
52   O    40(1)   Tire Inflator/Gauge (integrated into the hose)
53   O    40(1)   Tire Pressure Gauge
54   O    40(1)   Tire Inflator (with reservoir)                                  (Special Order)
55   O    40(1)   Tire Service Equipment (paste, brush, valve tool, valve pull-thru lever)
56   O    40(1)   Tire Inflator (for Tubeless tires)
57   O    40(1)   Impact Wrench (for Lug Bolts); 100 Nm MAX            (note: final torque by hand)
58   O    58(0)   Hand Drill (cord or cordless), with drill bit assortment
59   O    58(0)   Power Screw Driver (Rechargeable), with bit assortment
60   O    58(0)   Angled Hand Drill
61   O    58(0)   Drill Press
62   O    58(0)   Bench Grinder/Wire Wheel with Stand
63   O    58(0)   Angle Grinder/Cut-off Wheel (180 mm Dia Wheel)
64   O    58(0)   Straight/Die Grinder with Attachments
65   O    58(1)   Air Ratchet Wrench 1/4" drive
66   O    58(1)   Air Ratchet Wrench 3/8" drive
67   O    58(1)   Impact wrench (general), 1/2” 350 Nm
68   O    58(3)   Measuring tools, misc. (calipers, micrometers, straightedge, etc.)
69   O    58(3)   Drill bits, HSS 1-13 mm
70   O    58(3)   Tap & Die Set (metric: M5-M22)
71   O    58(3)   Torque Wrench Tester                                 (Special Order Equipment)
72   O    58(4)   Vise: 4", 5", or 6" jaw (medium duty 5")
73   O    00(3)   Mechanical Lifting Equipment (block and tackle)
74   O    00(3)   Chains, Straps, Sling etc.
75   O    00(3)   Vehicle Dolly, Maneuvering Aide
76   O   58(11)   Compressed-air hose, connectors, hose reels, nozzles, etc. (per bay)
77   O   58(11)   Compressed-air couplings, mating parts, net distributors, etc. (per bay)
78   O    58(0)   Electric Sheet Metal Nibbler
79   O    58(1)   Pneumatic Cut-off Saw
80   O    58(1)   Pneumatic Hammer Chisel
81   O    58(1)   Pneumatic Drill; straight and angled
82   O    58(1)   Pneumatic Grinders; spot, straight and angled
83   O    58(3)   Body Repair Tools; Hammers, Dollies etc.
84   O    58(3)   Body File
85   O    58(3)   Pliers; Punching, Beading, Gripping, etc.
86   O    58(3)   Sheet Metal Cutter
87   O    58(3)   Round Wire Brush Assortment
88   O    58(3)   Carbide Spherical Cutter
89   O    58(3)   Sheet Metal Chisel Set
90    O   58(3)    Edging and Crimping Tools
91    O   58(3)    Contour (Needle) Template
92    O   60-65    Soldering Iron (tinning) and Wooden Working Tool Set
93    O   60-65    Electric Hot-Air Blower (Plastic Repair); 6000 C capability
94    O   60-65    Sand-Blasting Device (for local spot application)
95    O   60-65    Dent Removal Systems (for paintless dent repairs)
96    O   60-65    Gas Welding Set; Oxygen/Acetylene (excludes tanks)
97    O   60-65    Welding Safety Curtain
98    O   67-80    Footwell Floor Covers (paper or fabric)
99    O   67-80    Cartridge Gun; Single, Cordless Electric
100   O   67-80    Window and Glass Repair
101   O   58(0)    Electric Sander, Orbital (with connection for dust extraction)
102   O   58(0)    Electric Sander, Rotary
103   O   58(0)    Polishing Machine, Electric
104   O   58(0)    Electric Sander, Oscillating (one hand operation)
105   O   58(0)    Corner and Edge Sander (Strightline-Triangular)
106   O   58(1)    Pneumatic Sander, Mini (Finger-type) (with connection for dust extraction)
107   O   58(1)    Pneumatic Sander, Oscillating; Dry (with connection for dust extraction)
108   O   58(1)    Pneumatic Sander, Spot (with connection for dust extraction)
109   O   58(1)    Pneumatic Sander, Orbital/Eccentric (with connection for dust extraction)
110   O   58(4)    Sandpaper (assortment)
111   O   58(4)    Brush (assortment)
112   O   58(4)    Spatula (assortment)
113   O   58(4)    Masking tape
114   O   58(4)    Masking paper, cut width 600/900/1500 mm
115   O   58(4)    Masking Paper Dispenser
116   O   58(4)    Sanding Blocks
117   O   58(4)    Sanding Files
118   O   58(4)    Cloths and Sponges; Final Wipe
119   O   58(4)    Other materials (DIN cup, disposable strainer, cups)
120   O   58(4)    Protective materials (painter’s overalls-SATAR, gloves, etc)
121   O   58(4)    Magnifying Lens (x 30 magnification)
122   O   58(4)    Stopwatch (to check paint viscosity)
123   O   58(4)    Gauge Sticks (for paint mixing ratios)
124   O   58(4)    Paint Finishing System (defect repairs in paint topcoat)
125   O   58(4)    Safety Goggles
126   O   58(4)    Tire Covers (50 per case)
127   O   58(4)    Mobile Tool/Utility Cart (specifically for paintshop)
128   O   58(4)    Tarpaulin Cover (to cover stored vehicles)
129   O   99(1)    Vehicle numbering system (vehicle identification on roof)
130   O   00(12)   Parts Washer
131   O   00(12)   Parts Cleaning Machine (with oil separator)
132   O   00(12)   Industrial Vacuum Cleaner (wet and dry)
133   O   00(13)   Floor Cleaning Equipment
134   O   18(1)    Oil Drainage Pans (for oil or water)
135   O   18(1)    Oil Filter Collection Bin
136   O   18(2)    Oiler (manual)
137   O   18(2)    Oil Measures; 2 quart capacity
138   O   18(2)    Drum Funnel (Barrel Drip Tray)
139   O   18(3)    Grease Gun, Hand Lever (manual)
140   O   00(21)   Vacuum Exhaust & Welding Fumes Extractors                     (must be quoted)
141   O   00(22)   Waste Containers (solid waste material), each
142   O   00(22)    Waste Containers (for liquid waste e.g. antifreeze, brake fluid etc.), each
143   O   00(22)    Waste Containers/Containment (inflammable/hazardous material), each
144   O             Protective Cover Set (SLR)
145   O             Exhaust Adapters (SLR)
146   O     01      Borescope, Rigid Optical (cold light source)
147   O     01      Borescope, Flexible Fiberscope (cold light source); non-cylinder evaluation
148   O     01      Floor Crane; Mobile
149   O     05      Valve Seat Cutter (manual or powered)
150   O     05      Valve Refacer
151   O    25-35    Telescopic High Lift Transmission Jack; (1000 lb. capacity)
152   O   42/43(2) Leak Tester, Ultrasonic
153   O   42/43(2) Brake Disc Lathe (with dust containment unit)
154   O    07(0)    Chassis Dynamometer (Performance)
155   O   07(3/4)   Fuel Quantity Comparison Measuring Bench            (Special Order Equipment)
156   O    07(6)    Exhaust Gas/Emission Tester (4-gas & 5-gas)           CO, HC, CO2, O2, NOx
157   O    07(6)    State Specific Emission Tester
158   O    13/20    Radiator Repair Equipment (to R & I plastic waterbox/tank)
159   O     47      Defueler/Refueler Tanker - Diesel
160   O     47      Defueler/Refueler Tanker - Gasoline
161   O    15/54    Alternator, Regulator, Battery, Starter Tester(s)
162   O    15/54    Portable Starting Aide (Jump/Booster starter)
163   O    15/54    DC Current Clamp
164   O    15/54    Signal (Frequency) Generator /Counter               (no longer available new)
165   O    15/54    Diagnostic Equipment and Literature Cabinet (mobile)           (Special Order)
166   O     82      Headlamp Adjusting Equipment (mechanical)
167   O     83      Refrigerant Recovery/Recycling/Recharging Station - R12
168   O    40(1)    Wheel Balancing Machine (w/road force application feature)
169   O    40(1)    Rapid-Clamping Device for Wheel Balancer (Quick Nut)
170   O    40(1)    Finish balancer
171   O    58(4)    Work Bench; Stationary - Tech Style (with 1" wooden top surface)
172   O    58(4)    Tear-Down Table; Portable, stainless steel top
173   O    58(4)    Work Table, Portable (with 1" wooden top surface)
174   O    58(4)    Work Centers (for computer terminal, printer, binders etc.)
175   O    58(9)    Tool board, MB Standard (2 x 1000 x 1050mm; MB grey)
176   O    58(9)    Tool Board Wall Mounting Bracket Set
177   O    58(9)    Wall Mounting Frame (for 2 boards); for load & non-load bearing walls
178   O    58(9)    Square Tower Cabinet Configuration (w/ 8 tool boards)
179   O    58(9)    Mobile A-Frame (for 2 tool boards)
180   O    58(9)    Tool Silhouette; Set for MB Special Tools (A-/B-)
181   O    00(1)    Four-Post Service Lift
182   O    00(1)    Scissors Service Lift
183   O    00(1)    Mid-Rise Portable Lift
184   O    00(2)    Vehicle Support Stand
185   O    00(3)    Folding Floor Crane, 2,200 lb. capacity
186   O   58(11)    Piston-type Compressor, Stationary (5 hp, 30 gal.)
187   O   58(11)    Screw-type Compressor, Stationary (3 hp)
188   O   58(11)    Refrigerated Air Dryer (20 cfm)
189   O   58(11)    Compressed-Air Filter Units (20 cfm)
190   O    58(1)    Pneumatic High-Speed Body Saw
191   O    58(1)    Pneumatic Spot Weld Drill
192   O    58(1)    Pneumatic Corrosion/Undercoating Remover
193   O    60-65    Straightening Bench Storage Rack
194   O   60-65    Utility/Storage Cart; 150x120x80cm, (for Bench Access., Fixtures, etc.)
195   O   60-65    Floor Frame Anchoring System (used with Dedicated Fixtures & Bench)
196   O   60-65    Straightening Post, Power Pad (used with item above)
197   O   60-65    Hydraulic Working Equipment Set (pullers, accessories)
198   O   60-65    Dent Removal Systems (stud-welding systems e.g. Airpuller, Dent-Fix)
199   O   60-65    Electrode cutter
200   O   60-65    MIG Welder; Steel (MillerR)
201   O   60-65    TIG (AC) Welder; Aluminum/Steel (MillerR)
202   O   60-65    Welding and Soldering Work Table/Bench; Steel Top
203   O   67-80    Fender Covers (1 pair)
204   O   67-80    Fascia Cover
205   O   67-80    Cutter Kit; Glass and Molding Removal (Pneumatic)
206   O   67-80    Manual Riveting Tools (e.g. blind pop rivets, C124 window lifter)
207   O   67-80    Power Riveting Tool, Cordless (e.g. for 4.8 and 6.4mm Dia. structural rivets)
208   O   67-80    Assembly Stand (for vehicle doors, e.g. W140)
209   O   58(1)    Dust Extractor, Suction, Mobile (explosion-proof)
210   O   58(4)    Paint Diagnostic Kit                                (Special Order Equipment)
211   O   58(4)    Compressed-Air Cleaning Nozzle (SATA)
212   O   58(4)    Paint Mixing Machines (per paint company: Akzo/BASF/Standox/Spies)
213   O   58(4)    Filter Mask Systems; SATAR (ventilated full-mask)
214   O   58(4)    Filter Mask Systems; SATAR (half-face mask)
215   O   98(1)    Vehicle Preparation Bay (prep station)
216   O   98(2)    Paint Preparation or Mixing Rooms
217   O   98(2)    Compressed-Air Cleaner and Pressure Gauge (SATA R:0/344)
218   O   98(2)    Conventional Paint Spray Gun (with gravity feed)
219   O   98(2)    HVLP Paint Spray Gun (with suction feed)
220   O   98(2)    Conventional Paint Spray Gun (with suction feed)
221   O   98(2)    HVLP Primer and Filler Gun
222   O   98(2)    Conventional Primer and Filler Gun
223   O   98(2)    Spray Blending Gun
224   O   98(2)    Cleaning Needles (for spray nozzles)
225   O   98(2)    Paint Spray Gun Holder
226   O   98(2)    Storage Unit (for paint spray guns)
227   O   98(2)    Water Separator (on paint spray gun)
228   O   98(2)    Flexible Joint (on paint spray gun)
229   O   98(2)    Air Pressure Fine Regulator (on paint spray gun)
230   O   98(2)    Compressed-Air Supply Hose (with connection fittings)
231   O   98(2)    Paint Gun Cleaning Units
232   O   98(2)    Painting Stands (for body components)
233   O   98(2)    Painting Stands (for bumpers)
234   O   98(2)    Paint Cure Lamps, Infrared (hand held)
235   O   98(2)    Paint Cure Lamps, Infrared (stand mounted)
236   O   98(2)    Paint Cure Lamps, Infrared (track mounted)
237   O   98(2)    Paint coat thickness indicator
238   O   98(2)    Drying Gun; HydromateR (for water-based paints)
239   O   99(2)    Microfiche Reader (table type)
240   O   99(2)    Workshop Computer Workcenters
241   O   00(11)   Car Wash, Soft Cloth, Roll-over (floor track)
242   O   00(11)   Car Wash, Soft Cloth, Drive Thru
243   O   00(11)   Car Wash, Soft Cloth, Conveyer
244   O   00(11)   Car Wash, Touchless
245   O   00(11)   Reclaim Systems (for Car Wash Waste Water Systems)
246     O      00(11)   Dryer, Touchless
247     O      00(12)   Pressure Washing, Hot Water (high-pressure)
248     O      00(12)   Industrial Vacuum/Dust Extractor (also for hazardous dusts)
249     O      00(12)   Vehicle Deodorizing Machine (activated oxygen generator)
250     O      18(1)    Engine Oil Drains, Mobile
251     O      18(1)    Used Oil Collection Tank, Single or Double Wall (120 - 2000 gallon); (~value)
252     O      18(1)    Oil Filter Crusher
253     O      18(2)    Fresh Oil Tank, Above-Ground (120 - 2000 gallon); (~ value)
254     O      18(2)    Oil Dispensing Pump
255     O      18(2)    Metering Control Handles
256     O      18(2)    Hose Reel, Open (~value)
257     O      18(2)    Dispensing Guns, Metered
258     O      18(2)    Pipes and Hard Plumbing for Oil Dispensing (Balcrank R); (~ cost per foot)
259     O      18(2)    Automatic Oil Dispensing Systems (Balcrank R); 2 x 6 unit
260     O      18(2)    Barrel Oil Dispenser, Manual
261     O      18(3)    Lubrication Grease Dispenser, High Pressure Pneumatic (for 120 lb. drum)
262     O      18(3)    Lubrication Systems, High Pressu.: via Balcrank R (per oil, ATF, gear oil, etc)
263     O      00(21)   Exhaust Systems, Overhead Reel with 1 hp Fan (5" dia.)
264     O      00(21)   Exhaust Removal , Overhead Reel (5" dia.)
265     O      00(21)   Exhaust Systems, Overhead Telescoping (4" dia.)
266     O      00(21)   Exhaust Removal Systems, Underfloor                         (must be quoted)
267     O      00(21)   Exhaust Systems, Overhead Door
268     O      00(21)   Exhaust/Tailpipe Adapters (universal)
269     O      00(21)   Exhaust/Tailpipe Adapters (220/215)
              42/43(1) Plate Brake Tester or Test Lane                           (Not Recommended)




      NOTES -
      This list defines Workshop Equipment which is required by the authorized M-B Dealer to perform service, maintenance, d
      Approved equipment is offered via the MBUSA Standard Service Equipment Program (e-SEEP) now on Star Tekinfo or v

      M-B Special Tools are not shown; refer to the MB Special Tool Program.

      The following are explanations for the designations shown in the columns:
      Equipment Category:
             R = This is Required equipment. Basic Equipment available via SSEP.
             O = This is Optional equipment. This is Recommended equipment.
      Service Group:
             - Identifies the specific service (or design) group of the vehicle for which the equipment applies.
             (this is similar to the service group designations as it applies to MB Special Tools).
      Description:
             - The common or prevalent terminology used for the equipment.
             - Other pertinent information provided is self-explanatory.


      Recommended Supply Sources:
      - Equipment that is referenced to the MBUSA SSEP catalog, is available by calling toll-free: 1-888-458-4040.
      or via the online catalog located on Star TekInfo --> MB Equipment tab
  Please refer to Gotis on Star TekInfo /
   Daimler Equipment / Launch SSEP
  Catalog for specific requirements and
           model information.
           Last update January 06, 2012                                      New Dealers

                     Comments                              Vendor P/N          SPX will
SPX complete kit                                                             Drop ship item
Leitenberger                                                 669-061202-1    Drop ship item
Leitenberger                                            521-GA30090-4898     Drop ship item
AGA                                                         270-D-M-10-02    Drop ship item
Facom                                                              J-50081   Drop ship item
Rommess Rogg                                              900 589 01 21 00   Drop ship item
Rommess Rogg                                              900 589 02 21 00   Drop ship item
Rommess Rogg                                              900 589 03 21 00   Drop ship item
Rommess Rogg                                              900 589 04 21 00   Drop ship item
SPX J-50160 Hybrid Safety Kit                                      J-50160   Drop ship item
Old MB p/n 900 589 01 27 00                               900 589 01 27 00   Drop ship item
Stierius; (via Power Probe)                                    ST-BBE-4.0    Drop ship item
Samson                                                        651-1322MB     Drop ship item
Replacement item                                          900 589 00 71 01    Spare item
Replacement item                                          900 589 00 91 00    Spare item
Contact SPX/Miller at 800 801 5420(Miller p/n 9077)       211 589 00 32 00   Drop ship item
Midtronics                                                165-EXP 717 KIT    Drop ship item
Bosch                                                         414-EFLE61     Drop ship item
SPX - DES p/n 521- 760130                                      521-760130    Drop ship item
IT Concepts (with recording capability)               271-XPA AUTO SET       Drop ship item   old p/n 271-24AKCV
Flaco                                                        270-40403150    Drop ship item
Flaco "Sprinter 1000mm length"                               270-40401130    Drop ship item
Robinair                                                     319-E2RB108     Drop ship item
Steinel                                                      428-HL1910E     Drop ship item
Rotary (Blitz)                                                  39-MG1BL     Drop ship item
Reliable Automotive Equipment Inc.                        900 589 04 67 00   Drop ship item
Midtronics                                               165-PSC-550SKIT     Drop ship item
Associated                                                       110-9425    Drop ship item


Leitenberger 669-DMP01 MBUSA                           669-DMP01 MBUSA Drop ship item
Bartec USA                                                 691-R-DEG-002 Drop ship item
SPX - DES p/n J-50234                                             J-50234 Drop ship item

Fluke                                                 part number 289/FVF
Robinair
see SSEP Online Catalog (www.startekinfo.com)
see SSEP Online Catalog (www.startekinfo.com)
see SSEP Online Catalog (www.startekinfo.com)
Hofmann, Hunter, John Bean
Hunter, Rotary
Hunter, Nussbaum
Rotary, Challenger, Nussbaum
Rotary, Challenger, Nussbaum
Kuss, Remstar
Werner Weitner - recommended
Werner Weitner - recommended
ETAS
Contact SPX/Miller at 800 801 5420


OTC brand 319-5609 OTC
Werner Weitner - recommended
Datex (AGA)
Nederman




Robinair
zed M-B Dealer to perform service, maintenance, diagnosis and repair.
pment Program (e-SEEP) now on Star Tekinfo or via www.startekinfo.com.




or which the equipment applies.
MB Special Tools).




le by calling toll-free: 1-888-458-4040.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:70
posted:4/8/2012
language:English
pages:13