Assembly instructions for Vert-rak
1 Mount upright frames to bumper. Position frames offset or centered on spare tire. Do
not tighten bolts until entire frame is assembled.
2 Bolt top rail to uprights.
3 Bolt bottom rail to uprights. Bolt to rear upright if tire is in center, front upright if tire
4 Mount tire hoops to top rail as shown in picture. When placing bikes on the rack you
can rotate the handle bars 180 deg to offset handle bars for recommended tire hoop
mounting position. Alternate method is to mount every other tire hoop reversed to the
rear to minimize handle bar contact.