"Maxit LWA Insufill"
MAXIT LWA Insufill offers bags of potential MAXIT LWA enables you to: Save hours Eliminate the cost of machinery hire Eliminate the need for secondary polystyrene insulation in ground floor construction Meet the new Building Regulations Simply carry in to restricted access sites. It is ideal for: • Extensions • Conversions • Conservatories • Garages • Refurbishments • Driveways MAXIT LWA Insufill MAXIT LWA is infill, insulation, lightweight and cuts foundation time by hours. It is available in easily portable 50 litre sacks weighing just 15kg, making insulated foundations which comply with the new Part L of the Building Regulations a simple, one man process. For what is really clever about MAXIT LWA in bags is that it is stored in the bag, collected and transported in the bag, laid in the site in the bag and covered in concrete – still in the bag. There’s no mess, no need for heavy machinery, no heavy lifting and no waste. Step 1 Lay loose fill to level up the floor Step 2 Lay the bags of MAXIT LWA side by side to cover the floor area Step 3 Fill in any spaces with more loose fill Step 4 Lay a 1200 gauge damp-proof membrane to complete the oversite Step 5 Lay the concrete. U-values (W/m²K) Nominal Depth (mm) Quantity (No.of bags) 0.45 150 3 bags per m² 0.25 250 5 bags per m² Meet the Building Regulations for Thermal Insulation The table is for guidance only. Where U-value is critical, please refer to MAXIT ’s Technical department on 01928 515656. U-values have been calculated in accordance with BS EN ISO 13370:1998 'Thermal Performance of Buildings. Heat Transfer via the ground. Calculation methods'or can be calculated using CIBSE Guide:Part A3:1999 'Thermal Properties of Building Structures'. Eliminate Health & Safety Problems MAXIT LWA bags weigh a nominal 15kg, well within the H&SE recommendations for a single-man lift. MAXIT LWA is chemically neutral and does not contain any environmentally harmful constituents. MAXIT LWA is safe to handle and does not need any special protective clothing or special requirements for disposal. A Albion Works, Ropery Road, Gainsborough, Lincolnshire DN21 2QB Tel : 01427 610160 Fax : 01427 811838 e-mail : firstname.lastname@example.org