Docstoc

commands

Document Sample
commands Powered By Docstoc
					(config)#router ospf process-id
   - Enters OSPF configuration mode
(config-router)#router-id ip-address
   - Configures router id
(config-router)#network network-address wildcard-mask area area-id
   - Configures the network to broadcast
(config-router)#auto-cost reference-bandwidth bandwidth-Mbps
   - Sets a new reference bandwidth in Mbps
(config-router)#default-information originate
   - Redistributes the default route information
#show ip protocols
   - Shows the router id
#show ip ospf
   - Shows the router id
   - Shows the delay between SPF algorithm calculation
#show   ip ospf interface
   -    Shows the router id
   -    Verify hello and dead interval
   -    Verify routing cost
   -    Shows DR and BDR
   -    View interface priority
#show ip ospf neighbours
   - Shows OSPF neighbour relationships
#clear ip ospf process
   - OSPF reconfigures the router id
#show interface interface
   - Shows the bandwidth of an interface
(config-if)#bandwidth bandwidth-Kbps
   - Configures the bandwidth of an interface in Kbps
(config-if)#ip ospf cost cost
   - Configures the cost of an interface
(config-if)#ip ospf priority {0-255}
   - Configures the priority of an interface for DR/BDR election
(config-if)#ip ospf hello-interval seconds
   - Configures the interval for hello packets in seconds
(config-if)#ip ospf dead-interval seconds
   - Configures the dead interval in seconds

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:3/30/2012
language:
pages:1