Docstoc

clear-multicast-bandwidth-admission

Document Sample
clear-multicast-bandwidth-admission Powered By Docstoc
					clear multicast bandwidth-admission

                 Syntax    clear multicast bandwidth-admission
                           <group group-address>
                           <inet | inet6>
                           <instance instance-name>
                           <interface interface-name>
                           <source source-address>


   Release Information     Command introduced in JUNOS Release 8.3.
                           Command introduced in JUNOS Release 9.0 for EX Series switches.
                           inet6 and instance options introduced in JUNOS Release 10.0 for EX Series switches.

            Description    Reapply IP multicast bandwidth admissions.

                Options    none—Reapply multicast bandwidth admissions for all IPv4 forwarding entries in
                               the master routing instance.

                           group group-address—(Optional) Reapply multicast bandwidth admissions for the
                               specified group.

                           inet—(Optional) Reapply multicast bandwidth admission settings for IPv4 flows.

                           inet6—(Optional) Reapply multicast bandwidth admission settings for IPv6 flows.

                           instance instance-name—(Optional) Reapply multicast bandwidth admission settings
                               for the specified instance. If you do not specify an instance, the command applies
                               to the master routing instance.

                           interface interface-name—(Optional) Examines the corresponding outbound interface
                               in the relevant entries and acts as follows:
                               ■   If the interface is congested, and it was admitted previously, it is removed.
                               ■   If the interface was rejected previously, the clear multicast
                                   bandwidth-admission command enables the interface to be admitted as long
                                   as enough bandwidth exists on the interface.
                               ■   If you do not specify an interface, issuing the clear multicast
                                   bandwidth-admission command readmits any previously rejected interface
                                   for the relevant entries as long as enough bandwidth exists on the interface.

                               To manually reject previously admitted outbound interfaces, you must specify
                               the interface.

                           source source-address—(Optional) Use with the group option to reapply multicast
                               bandwidth admission settings for the specified (source, group) entry.

Required Privilege Level   clear




                                                                          clear multicast bandwidth-admission   ■   1
          Related Topics     ■    show multicast interface


    List of Sample Output    clear multicast bandwidth-admission on page 2

            Output Fields    When you enter this command, you are provided feedback on the status of your
                             request.

         clear multicast     user@host> clear multicast bandwidth-admission
    bandwidth-admission



Published: 2010-04-28




2     ■   clear multicast bandwidth-admission

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:3/30/2012
language:
pages:2