VIEWS: 3 PAGES: 1 POSTED ON: 3/25/2012
8 Issue N°11 • November 2007 Vision & Imaging Machine Vision Sensor Thermal Imager largely maintenance-free for industrial maintenance The SRV is a vision sensor for in- The easy-to-use Fluke dustrial image processing, which Ti35 is fully radiomet- is able to complete image process- ric and features a 180° ing tasks without any further articulating lens for peripheral equipment. It per- viewing and captur- forms assembly and feature ing images in areas checks, recognizes damages on with poor accessibili- edges, detects the position of ty. The thermal imag- fastenings and labels, sorts and er offers high ther- removes defective components. mal sensitivity to 0.1°C In pick & place applications, it using a 160x120pixel detector for viewing even the makes sure that parts in all kinds smallest temperature differences across a wide -20 to of rotary positions are safely gripped. The compact 350°C range. A large 12.5cm high-contrast colour LCD housing of the sensor accommodates LEDs and an eval- provides clear pictures, irrespective of lighting conditions. uation unit with all the necessary software and inter- This makes it suitable for the capture of high quality im- faces. It offers a high resolution of 720x480 pixels (W ages in a broad range of industrial applications, includ- VGA) and a frame rate of 60fps. There is a choice of three ing predictive maintenance, process monitoring, re- operating distances (150, 300 or 450mm), each with dif- pair checks and quality control. The device sports the ferent frame sizes (76x48, 117x72 or 129x81mm). Inte- SmartFocus feature, for single finger capture of the best grated industrial I/O interfaces (3 in, 3 out), one analogue quality images and accurate temperature measure- output and a USB 2.0 connection to the graphical user ments. The Fluke Ti35 comes as a complete kit which in- interface are available. The position results can be cludes a compact flash card for storing over 1,000 im- transmitted via a serial interface. ages, a hard carry case and PC software. SCHUNK FLUKE Tel. +49-7133-1030 • Fax +49-7133-103299 Tel. +31-40-2675212 • Fax +31-40-2675210 For SLI: enter 20690 at www.tim-info.com/ien For SLI: enter 20031 at www.tim-info.com/ien For SLI: enter 16813 at www.tim-info.com/ien Industrial Flat Panel Monitors Ethernet Camera for hazardous location for mobile applications The M-Series of indus- The O2M100 Ethernet cam- trial flat panel moni- era meets the requirements of tors is offered in three mobile control systems caused sizes, 15" (M1500), by extreme environmental in- 17" (M1700), and 19" fluences. It has fully sealed (M1900). Their com- die-cast zinc housing with the pact profile results in protection rating IP67. The a panel mounted two integrated M12 connec- depth of less than tors provide important connec- 70mm, making them suitable for installation in harsh tions for supply and commu- environments for factory automation and demanding nication. When mounting, the unit with the dimensions commercial applications. The monitors support XGA for- 80x42x53.5mm (HxWxD) can be fixed directly to the mo- mat. They all provide Analogue Video (VGA) connections bile machine via an adapter system. With tempera- and allow either connection via USB or RS-232 for the ture-controlled window heating, the camera objective optional 5-wire analogue resistive touchscreen. The can be defrosted in case of extreme conditions. The dig- M1700 and M1900 additionally have Digital Video In- ital capturing and transmission of the image data en- puts (DVI). All versions are standard with 100-240 VAC able scaling and free positioning of the camera image. input power supplies and have IP65 NEMA 4/4x/12 pan- The image data are on the one hand stored in a UDP/IP el mountable front panels. Stainless Steel front panels protocol and on the other hand stored as 8-bit Windows and 24V DC input power are available options for all three. bitmap. The device is fitted with an Ethernet inter- The entire series is UL/cUL listed, complies with European face for communication. In contrast to analogue cam- CE and RoHS requirements, and are UL approved for Class era systems, the camera image can be shown on any num- I and II, Division 2 hazardous locations. ber of displays via a simple Ethernet hub or switch. NEMATRON IFM ELECTRONIC Tel. +44-2392-268080 • Fax +44-2392-268081 Tel. +49-201-2422411 • Fax +49-201-2422401 For SLI: enter 20514 at www.tim-info.com/ien For SLI: enter 20534 at www.tim-info.com/ien Shadowgraph Camera with in-built velocity trap Modern image sensors have allowed the design of cameras that will capture up to 11-million pixel images with the ability to shutter faster than 1µs. In- tegrating this camera with an ultra-fast high intensity spark source has resulted in a Shadowgraph cam- era capable of image quality previously achievable only with film cameras, yet offering instantaneous access to data. Control software provides simple adjust- ment of imaging parameters and extensive measurement tools to accurately analyse results. Camera stations can be arranged in the classic configuration looking directly at a reflective screen or as orthogonal pairs to provide valuable 3D data such as the pitch and yaw of supersonic airflows. A comprehensive triggering func- tionality has been implemented in the SIS camera system enabling it to be interfaced with almost any trig- gering device. Applications include aeronautical engineering and testing of glass. SPECIALISED IMAGING Tel. +44-1442-827728 • Fax +44-1442-822847 For SLI: enter 20538 at www.tim-info.com/ien For SLI: enter 16259 at www.tim-info.com/ien For SLI: enter 15499 at www.tim-info.com/ien
"Machine Vision Sensor Thermal Imager Industrial Flat Panel"