ROSK Engineering Vacuum Tube Amplifier Design CDs

Document Sample
ROSK Engineering Vacuum Tube Amplifier Design CDs Powered By Docstoc
					ROSK Engineering Vacuum Tube Amplifier Design CDs




  That’s right! The Mad Scientist himself PAUL ROSK has released some of his FAMOUS
                                  designs (it’s about time!)




These CDs contain all the Drawings, Schematics, Spice Models, Bill Of
   Materials, Instructions, Vendor Lists, EVERYTHING you need to
 duplicate ROSK’s famous ALL TUBE GUITAR AMPLIFIER CIRCUITS
                   with “off the shelf” components!

PLUS a 100% working SPICE / CAD PACKAGE! SCHEMATIC CAPTURE
 - SPICE MODELING - DRAWING PRINTOUT – BILL OF MATERIALS!
 Plus the entire USER MANUAL FREE! Watch the design "WORK" on
                  the screen BEFORE YOU BUILD IT!

    Check The Web-Site Here: http://home.earthlink.net/~roskeng
                           Design CDs Currently Available:

                      Guitar/Bass Pre Amp - $39.99 + S&H
                                   Order Number: RGBP-01

     Use it for Guitar, Bass, 6-String, 7-String, you name it! Ever “HAMMER ON” a 3rd Fret
Harmonic, now you can! Run this PreAmp into ANY power amp and you’ll knock the 1st 6 rows
of the audience into the BACK WALL! Sustain, how about .. “The Note Doesn’t End Until YOU
Mute The String!”. An endless well of classic and modern guitar/bass tones. From the classic
  50’s and 60’s “Fender Era” to Over Driven Marshalls, Riveras, Soldanos, any tone you can
                      imagine, just “Dial-It-Up” and you’re ready to ROCK!
The ULTIMATE Tube PreAmp! More Tones Than A Room Full Of Vintage Amplifiers! 100 Times
 More Gain Than Any Marshall “High Gain” Chunk Of Junk! Here Are The PreAmp Response
                                      Waveforms, Top This!

                                    INPUT vs. OUTPUT Signal




                                     Frequency Response




                                        Tone Variations
                    All Tube Compressor - $39.99 + S&H

                                 Order Number: RATC-01

 No Solid State “FAKE” Compression Here! This Is ALL TUBE From Input To Output! Based
  On A Classic Compressor Design With ROSK’s New “Attack-Decay” System, This Is THE
ULTIMATE Compressor for Guitar, Bass, Vocals, ANYTHING! With It’s “VARIABLE” Response
                        Section, This Compressor Can DO IT ALL!

                        Just Take A Look At These Waveforms!
                                INPUT vs. OUTPUT Signal




                                  Frequency Response




                                     Attack / Decay
                    Power Tube Gain Driver - $39.99 + S&H
                                   Order Number: RPTGD-01

 The “SECRET” To Great Tone And Sustain! How To OverDrive The Power Tubes To Obtain
 That True “VACUUM TUBE TONE” Without All The “NOISE” From An OverDriven PreAmp!
  And Here’s The “TONE NIRVANA” You Can SWITCH IT IN AND OUT! No More “CHEAP”
        Sounding Distortion, Only REAL TONE-TO-THE-BONE Crunch And Scream!

            Note: This Design CD Requires A Signed Non-Disclosure Agreement

                   Guitar Amplifier Circuits - $39.99 + S&H
                                   Order Number: RGAC-01


  A Collection Of Various PreAmps, Tone Stacks, Tremolo Circuits, And Switching Circuits.
                       A Real “TOOLBOX” Of Vacuum Tube HEAVEN!

                       NEW – JUST RELEASED !!!
                         Power Amplifier - $49.99 + S&H
                                    Order Number: RPA-01

    Ok, Ok, You’ve Been Bugging Us For Decades About This, So Here You Go! The World
  Famous ROSK VACUUM TUBE POWER AMPLIFIER With That Sought After TRUE POWER
TUBE MASTER VOLUME! This The Heart Of True TONE-TO-THE-BONE !!!!! Drive Those Power
  Tubes ALL THE WAY, FLAT OUT And Keep The Volume WAY ……… DOWN While NEVER
LOOSING ONE OUNCE OF TONE!!! Can’t Be Done You Say? Well, It’s Been Done Since 1973,
 And ROSK Was The First One To Discover How Simple It Really Was! Power Soaks? Power
  Scalers? Power Attenuators? A JOKE! All They Do Is Destroy Your Power Tubes, Heat Up
Your Amplifier, Drain The Power Supply, And THEY DON’T WORK! How Do You Get That Tone
 Of A Vacuum Tube Amplifier Turned ALL THE WAY UP Without The Ear Shattering Volume?
                            Rosk Knows, And Now You Can Too!

                                    Tone vs. Master Volume




            Note: This Design CD Requires A Signed Non-Disclosure Agreement
                         All Design CDs- $189.99 + S&H
                                  Order Number: RADCD-01

   Don’t Know Where To Start? Want The Entire Collection In One Shot? Well, Here’s Your
                               Chance To “CASH IN” ….

 Get The Entire CD Collection PLUS a BONUS CD! That’s Right, The Entire Collection Plus A
Bonus CD With A Ton Of Various Vacuum Tube Design Programs, A Personal VACUUM TUBE
DATABASE Program (Has EVERY FREAKIN’ TUBE IN THE WORLD!) With Design Parameters,
   Spec Sheets, Web-Links, And MORE! Power Supply Designers, Tone Stack Designers,
        Anything And EVERYTHING You Need To Become A Vacuum Tube Genius!

                                 Price List And Ordering:

 We Accept (And Prefer) PayPal Payments, US Postal Money Orders, Personal Checks (May
                             Take Up To 10 Days To Clear).


Guitar/Bass Pre Amp - Order Number: RGBP-01                  $39.99 + $5.00 S&H
All Tube Compressor - Order Number: RATC-01                  $39.99 + $5.00 S&H
Power Tube Gain Driver - Order Number: RPTGD-01              $39.99 + $5.00 S&H
Guitar Amplifier Circuits - Order Number: RGAC-01            $39.99 + $5.00 S&H
Power Amplifier - Order Number: RPA-01                       $49.99 + $5.00 S&H
All Design CDs - Order Number: RADCD-01                      $189.99 + $7.00 S&H

Each CD contains a 100% working Schematic Capture, Spice Modeling, Drawing
And Waveform Printout, Bill Of Material Generator - Design Package COMPLETE
                    Plus the entire USER MANUAL FREE!

Plus You Get A LIFETIME Of Technical Support From The Mad Scientist Himself!

To Contact Us:

EMAIL: ROSKENG@HOTMAIL.COM OR ROSKENG@EARTHLINK.NET

Web-Site: http://home.earthlink.net/~roskeng

PayPal Payments To: ROSKENG@HOTMAIL.COM


                             ROCK ON !!              Paul Rosk