Reference Tape and reel information

Document Sample
Reference Tape and reel information Powered By Docstoc
					                                                                                         SSSMini3-F2-B
                                         Tape and reel
    Reference                                                                          Total pages        page
                                          information                                      2                  1
1. Taping quantity

       The standard quantity shall be 10000 pcs / reel.


2. Taping form and dimensions                                                                           Unit:mm
                                        P0
                              D0   P2                     A0                                             t1




                                                                                       W
                                                                              E
                                                                              F




                                                                                                           φ0.5
                  3



                                                                    B0

                                                                         B1
              1       2




                                                                                  W1
      *A terminal number is shown

                                   P1                          A1                                             K2
                                             2.       1.                                                      K
                                                                                                              K1
                                                                                                              t2

  1. Carrier tape
  2. Cover tape
                          Item               Symbol Dimensions                Remarks
                                               A0    0.40±0.05
                     Length                               +0.05
                                            A1      1.30
                                                          -0.04
                                            B0       1.15±0.05
  Dented square      Width
                                            B1       1.40±0.05
  hole for product
                                                          +0.05
  insertion          Depth                   K      0.60
                                                          -0.04
                                                          +0.05
                     Lead position depth    K2      0.65
                                                          -0.04
                     Pitch                  P1       2.00±0.05 Accumulated error ±0.2max/10 pitches
                     Diameter               D0       1.55±0.05
  Sprocket hole      Pitch                  P0       4.00±0.06 Accumulated error ±0.2max/10 pitches
                     Position                E       1.75±0.06
  Center-to-center   Longitudinal           P2       2.00±0.05
  distance           Traverse                F       3.50±0.05
  Cover tape         Width                  W1        5.4±0.1
                     Width                  W         8.0±0.2
  Carrier tape
                     Thickness              t1        0.2±0.1
  Hole outer depth                          K1       0.70±0.10
  Total thickness                           t2       0.80±0.20
  Note : 1) Radius at each corner shall be 0.25R or less.

 2009.4.21        2010.3.26
Established       Revised
                                                                                                Panasonic Corporation
                                                                                      SSSMini3-F2-B
                                         Tape and reel
    Reference                                                                     Total pages            page
                                          information                                      2               2
3. Reel and dimensions                                                                                 Unit:mm

                                                          C3 Labeling position




                                          EIAJ C3


               Surface                    R




                                                                                          C

                                                                                               N
                                                                                                   A
                                                      E
                                              D




                                              Label
                                        EIAJ-RRM-


                                                                                 W1       W1
                                                                                      W

                                                                    Labeling position




                   Back




                      Item                    Symbol Dimensions                           Remarks
              Diameter                           A      180+0.0/-3.0
  Flange      Thickness                         W1            1.2
              Distance between flanges           W         9.0±0.3
              Outer diameter                     N      60.0+1.0/-0.0
              Spindle hole diameter              C        13.0±0.2
  Hub                   Width                    E         2.0±0.5
              Keyway Depth                       D        21.0±0.8
                        Radius at corner         R            1.0
                               To be printed on one side of flange.
  Indication of the name, etc
                               Name, Quantity, Serial No, etc. to be shown




 2009.4.21    2010.3.26
Established   Revised
                                                                                               Panasonic Corporation

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:3
posted:3/21/2012
language:
pages:2