Toddler Bed

					Instructions For Use

                                                                                                                                         Toddler Bed
                                                                                                                      IMPORTANT - READ CAREFULLY
Please read all warnings and instructions before first use.                                                         AND KEEP FOR FUTURE REFERENCE.
For ages 18 months to 4 years.
                                                                                                                                                                                               G                                         I
Approx Dimensions: 146cm x 75cm                                                                                                                                                           F
For use with mattress size: 140cm x 70cm                                                                                                                                    K
Mattress NOT included.

This product has been tested and complies to BS 8509:2008.                                                                                                        E

• Always use the correct size mattress for this product.                                                                                                                                                                                         L
• Do not use water or inflatable mattresses on this product.
• Only use this product on a level surface, free from obstruction.
• Do not place this child’s bed near heat sources, windows and other furniture.                                                                                                                                                          A
• Children are likely to play, bounce, jump and climb on beds. Therefore the child’s bed should not be placed too                                                                                                                    B
close to other furniture or windows, and should be placed either tight to any wall or have a gap of 300mm between
the wall and side of the bed. Children should be discouraged from jumping on the bed.
• Do not place near windows where cords from blinds or drapes may strangle a child. Child may fall out of the                                  J
• Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend
strings over toddler bed or attach strings to toys.                                                                                                                                            FOR USE WITH MATTRESS SIZE: 140CM X 70CM
• Do not use this child’s bed if any part is broken, torn or missing.                                                                                                                      D
• Discontinue use if weakening or breakage found.                                                                                                          F                                   APPROXIMATE ASSEMBLY TIME REQUIRED: 45 MINUTES

• Check all assembly fixings regularly, tighten if necessary. This should be checked periodically.
• Do not use for infants. This bed is not suitable as a crib.
• Failure to comply with these precautions may result in injury.
                                                                                                                    A          LONG LEG (x2)           B          SIDE BARS - BACK (x2)        C          SIDE BARS - FRONT (x2)             D            SHORT LEG (x2)

• Contact our Customer Care number in the event of a failure.

Care and Maintenance
Before assembly and each use inspect bed for damaged hardware, loose joints, missing parts or sharp edges.
                                                                                                                    E        CROSS BARS (x18)          F              END BARS (x2)            G          SUPPORT END BAR (x1)               I           HEADBOARD (x1)
DO NOT USE if any part is missing, damaged or broken.
DO NOT substitute parts. Use only additional or replacements parts supplied by Character World Limited.

To clean bed frame and bed rails use only household soap or detergent and warm water.

Model Number:                                                                                                       J         FOOTBOARD (x1)           K         LEFT-HAND BED RAIL (x1)       L        RIGHT-HAND BED RAIL (x1)             M       CENTRE SUPPORT LEGS (x2)

Colour and specification of product may vary.
Made in China.
Retain packaging and instructions for future reference.

CUSTOMER CARE 0845 004 9217                                                                                         N   SHORT BOLT (x36) + (2 SPARE)   P       MEDIUM BOLT (x8) + (1 SPARE)    Q        LONG BOLT (x8) + (2 SPARE)           R       LOCK NUT (x4) + (2 SPARE)

                                                                                                                                  15mm                                   30mm                                   45mm

                                                                                                                    S           HEX KEY (x2)

              Character World Limited - Character House - 1 Oak Green - Stanley Green Business Park
                                 Cheadle Hulme - Cheadle - Cheshire - SK8 6QL.
                     Tel: 0845 004 9217 - Fax: 0845 004 9218 -

       1                                                                                                                                        4                                     I

                                                                                                                                                                                                                     Insert the headboard ‘I’ into the open ends of the
                                                                                                                                                                                                                     long legs ‘A’. Place long bolt ‘Q’ into the highest
    Assemble sidebars ‘C’, end bar ‘F’ and                                                                                                                                                                           hole on each long leg.
    crossbars ‘E’ as shown in diagram.                                                                                                                                                                               Repeat for the other side of the headboard.
    Insert short bolts ‘N’ and secure the crossbars ‘E’                                                                                                                                                              Tighten long bolt ‘Q’ with the hex key ‘S’.
    to the sidebars ‘C’ using the hex key ‘S’.                                                                                                                                                                       When inserting bolts only tighten 3/4 of the way.
    When inserting bolts only tighten 3/4 of the way.                C                                                        C                         Q
                                                                                                                                                                                                                     DO NOT over tighten.
    DO NOT over tighten.

    Once assembled turn the frame section over so
    the screws are on the bottom.                                                                                                       S               A


                                                                                                                                                     Insert the footboard ‘J’ into the open ends of the
                                                                                                                                                     short legs ‘D’. Place long bolt ‘Q’ into the lowest
                                                                                                                                                     hole on each short leg. Repeat for the other side of the
                                                                                                                                                     footboard. Tighten long bolt ‘Q’ with the

                                                                                    2                                                                hex key ‘S’.
                                                                                                                                                     When inserting bolts only tighten 3/4 of the way.
                                                                                                                                                     DO NOT over tighten.

                                                                                    Repeat step 1 to assemble sidebars ‘B’,
   B                                                           B                    end bar ‘F’ and crossbars ‘E’ as shown in diagram.
                                                                                    When inserting bolts only tighten 3/4 of the way.
                                                                                    DO NOT over tighten.                                                                                                                                 D

                                                                         S          Once assembled turn the frame section over so
                                                                                    the screws are on the bottom.
                                                                          N                                                                                                               B
                                 E                                                                                                                 6                                                      Joint the side tube ‘B’ and ‘C’ with centre support leg ‘M’
                                                                                                                                                                                                          using a lock nut ‘R’ and long bolt ‘Q’ for each side.

 3                                                                                                                                                                   C

Insert medium bolts ‘P’ into bottom hole/locknut of long legs ‘A’                                         A
securing the long legs to the frame. Please note the locknuts are pre-fitted.
Attach long legs ‘A’ to sidebar section ‘B’ with end bar ‘G’ using long bolt ‘Q’.
Insert long bolts through the middle holes on each long leg ‘A’
and into the end bar ‘G’.                                                                 F                      G
Repeat the above method to attach short legs ‘D’                              E
to sidebar section ‘C’. Inserting medium bolts ‘P’ through the top                                                                              Push the bed rail clips ‘K/L’ onto long leg ‘A’.
two holes/locknuts of short legs ‘D’.                                                                                                           Bed rails must be attached to the long legs so                                                                              A
                                                                                                                                                that the bed rail clips are on the inside. Please note
When inserting bolts only tighten 3/4 of the way.                                                                                               the bed rails are designed to be a tight fit for security.
DO NOT over tighten.                                                                                                                                                                                                                                                    L
                                                                                                                                                Push the rail ‘K/L’ onto centre support leg, insert lock
Finally Joint together
sidebar sections ‘B’ and ‘C’.                                                                                         B                         nut through the top hole in centre support leg as
                                                                                                                                                shown in diagram. Insert medium bolt ‘P’ into hole                                                   P
                                                                                                                                                and tighten using hex key ‘S’.
                                    D                                                                                                       Q   DO NOT over tighten.
                                                                                                                                                Toddler bed is intended for use with mattress size
                                                    F                                 C                                                         140cm x 70cm.

                                                                                                                                                                                              Check all parts and fixings are in place and secure.
                                                                                                                                                                                              Using the hex key ‘S’ tighten all the screws.


Shared By: