Choosing The Right Surface Cleaner
Let’s face the plain truth. Cleaning an industrial set up could pose a huge challenge.
There are normally dirt and grease spills all over the floors, on the machinery and
also on the walls. To be able to clean better, you must have a powerful, safe and
highly user friendly surface cleaner. So, how do you go about choosing the correct
cleaner for your industrial surfaces? Some factors that should be taken into account
are listed below:
Consider the Type of Cleaning
Different industrial set-ups have different types of surfaces and due to this
uniqueness, it is imperative to choose an industrial cleaner that suits it. The amount
of daily or periodic cleaning to be done determines your choice of an industrial
cleaner. There exist different types of surface cleaners, all of them built to suit
If your surface is full of earth mud or road dirt, cold pressure would make the best of
surface cleaners. This is the case in scenarios where oils and grease are not available.
When there is a grime dirt(I mean dirt that clings to a surface),cold pressure cleaners
doesn’t normally offer the best choice. You can give your pavements, connecting
roads and factory surface a thorough cleaning with the use of this kind of a cleaner.
Where the floor is covered with gime, gum, oil or grease, hot pressure washers can
help do the cleaning. Instead, steam cleaners do a superb work
The Volume of Cleaning to be done
If the volume of cleaning to be done is huge, a machine that supplies higher pressure
would be highly desirable. Surface washers that offer both higher pressure and
volume would make the best option.
The pressure is normally rated in PSI which is Pressure per Square Inch. Many
pressure washers have ranges of between 750-5000 PSI.Excessive pressure may lead
to blowing of dirt all over the area and it is just important to choose a pressure range
that offers you whatever you want.
The volume, which is rated in gallons per minute (GPM) also makes an important
consideration to be made when using both hot and cold pressure washers.
Mobility or Portability
Industrial surfaces normally cover expansive areas and there is need to ensure that
the surface cleaners which you choose are portable. There is no limitation in
choosing the best brands. You will just get whatever you want. Avoid stationary units
when the need to move around is huge.
The Fuel Type
What type of fuel would you like your surface cleaners to burn? Well, you can
choose among brands and models that use diesel oil, gas or electric power. Your
decision should be guided by your environmental conditions, the overall heating
costs that you will incur among other considerations.
Choosing the best cleaner for industrial surfaces need not be a mammoth task. If you
know what to look at, you will absolutely find it easy to choose the best. The fuel
type, the need for mobility and the volume of cleaning to be done are the major
determinants of an industrial cleaner.
Steamaster is a service company that’s passionate about offering their customers
the best. The company supplies different sizes of surface cleaners. The company's
core success lies in exceptional customer service delivery, high levels of innovation
and teamwork. Steamaster serves businesses and government agencies among
others. Consult Steamaster for your comprehensive cleaning requirements.