Docstoc

MDD 10 193

Document Sample
MDD 10 193 Powered By Docstoc
					                                                   SPAA MDD Change Proposal Form




 MDD Change Number:                          MDD 10/193                                                                  Date       Saturday, March 03, 2012               Form Version: 2.4
 (assigned incrementally by SPAA Change Control Administrator in format MDD/YY/NNN)
                                                                                      Key:
                                                                                      Yellow Fields = Mandatory fields must be populated
 Click here to refer to the Form Guidance Notes when                                  Blue Fields = Conditional depending on answers provided. Refer to guidance notes for info

 completing this form                                                                 Grey Fields = optional Fields
                                                                                      Black Fields = Not Required dependent on answers provided in section 2 and 3




Section 1) ORIGINATOR DETAILS

                    Name                   Andrea Hillyer                                          Company Name                            First Utility

            Email Address          andrea.hillyer@first-utility.com                      Company Registration No.                           5070887

        Telephone Number                   01926 328 785                                               Fax Number




 Market Participant Role: DOMESTIC SUPPLIER / I&C SUPPLIER / SHIPPER / TRANSPORTER / MAM*                                          *delete as appropriate

 Are you currently a party to the SPAA?                  Yes     *                    *(use drop down to indicate)


 N.B If you are NOT a party to the SPAA this MDD Change Request must be sponsored by a SPAA Party. Please confirm which Party is sponsoring the CP.

              Party Name:                    first:utility                                          Contact Name:                          Sunny Vara




Section 2) NATURE OF MDD CHANGE REQUEST
 Using the drop downs please state what the MDD Change Request is for. Leave the field blank if you don’t intend to update the section:


                  Add/Delete a Meter Model               Add                          (if populated complete Section 3 & 3.1)
             Add/Delete a Converter Model                                             (if populated complete Section 3 & 3.2)
  Add/Delete/Amend a Market Participant:                                              (if add/delete complete Section 4.1/if amend complete Section 4.2)

 Any changes to MDD Data Attributes other than those relating to Meter Model or Market Participant should be raised via SPAA Change Proposals in
 accordance with clause 9 of the SPAA)

Section 3) METER MODEL DETAILS

 The MDD Change Process can be used to add new meters to, or delete old meters from, the current version of the RGMA Market Domain Data. In the event
 the MDD Change Request is to change existing meter details which are incorrect, the incorrect meter details should be removed and the correct meter
 details should be added. All of MDD Attributes listed below should be included in the relevant format (see RGMA Processes and Data and Market Domain
 Data documents on the SPAA website). If the MDD Change Request covers a number of meters please complete an additional sheet for each meter.


 Do you wish to Add/Delete multiple Meter/Converter Models with this MDD change
                                                                                                                          No     *(use drop down to indicate)


 If you answered Yes to the above question please indicate the number of Models
 included within this proposal


 N.B If you choose    Yes     please complete the Multiple Meter Proposal Form by clicking HERE instead of completing section 3 on this form



                     3.1 Add/ Delete Meter Model                                                                       3.2 Add/Delete Converter Model

 This box will be populated from the                                                  This box will be populated from the answer
                                                         Add                                                                                          #N/A
 answer you gave in section 2                                                         you gave in section 2

               Meter Specific Requirements              Model Information                                 Meter Specific Requirements                      Model Information

                             Product ID (A0109)                                                                           Product ID (A0109)

                            Model Code (A0083)               E6VLG310P                                                   Model Code (A0083)

                    Manufacturer Code (A0060)                  LPG
                   Measuring Capacity (A0112)                    6
                   Multiplication Factor (A0120)                 1                                               Model description (A0084)

             Number of Dials or Digits (A0121)                   5
                            Pulse Value (A0194)                  0
                      Units of Measure (A0123)                 SCMH                              Corrected Multiplication Factor (A0120)

                            Meter Type (A0025)                  U                            Corrected Number of Dials or Digits (A0121)

               Meter Mechanism Code (A0085)                     PP                             Uncorrected Multiplication Factor (A0120)

                Payment Method Code (A0163)                     PP                      Uncorrected Number of Dials or Digits (A0121)

                                       End Date                                                                      Correcting Basis (A0036)

                                                                                                               Manufacturer Code (A0060)



                                                                      1 of 17
SPAA MDD Change Proposal Form




            2 of 17
                                                    SPAA MDD Change Proposal Form




Section 4) MARKET PARTICIPANT DETAILS

                 4.1 Add/ Delete Market Participant

 This box will be populated from the
                                                       #N/A
 answer you gave in section 2

         Market Participant Requirements                                         The MDD Change Process can be used to add new market participants to, or
                                                                                 delete old market participants from, the current version of the RGMA Market
      Market Participant Abbreviated Name (A0064)
                                                                                 Domain Data. In the event the MDD Change Request is to change existing market
                                                                                 participant details which are incorrect, the incorrect details should be deleted and
                                                                                 the correct details should be added. All MDD Attributes listed below should be
                 Market Participant Name (A0065)
                                                                                 included in the relevant format (see RGMA Processes and Data and Market
                                                                                 Domain Data documents on the SPAA website). If the MDD Change Request
                              Role Code (A0126)
                                                                                 covers a number of market participants, or a market participant in more than one
                                                                                 role, please complete an additional sheet for each participant/role.

                       Party Group Name (A0066)



                                End Date (A0067)

             3rd Party Service Code Type (A0069)




                    4.2 Amend Market Participant

 This box will be populated from the
                                                       #N/A
 answer you gave in section 2

         Market Participant Requirements                 Amend From                             Market Participant Requirements                   Amend To

      Market Participant Abbreviated Name (A0064)             UUL                           Market Participant Abbreviated Name (A0064)             UUL

                                                                                                                                           Calvin Asset Management
                 Market Participant Name (A0065)      United Utilities Plc                              Market Participant Name (A0065)
                                                                                                                                                      Ltd

                              Role Code (A0126)               MAM                                                      Role Code (A0126)         MAM & MAP


                       Party Group Name (A0066)                                                                 Party Group Name (A0066)



             3rd Party Service Code Type (A0069)                                                    3rd Party Service Code Type (A0069)               3




Section 5) ANY SUPPORTING COMMENTS




Section 6) FOR SPAA CHANGE CONTROL ADMINISTRATOR USE ONLY

           Date Released                      1-Oct-10


       Approved/Rejected                                                     *   *(use drop down to indicate)

         Reasons (if any)




                  Signed



             Please log the CP on the SPAA website at www.spaa.co.uk or return the completed form to spaachanges@electralink.co.uk




                                                                    3 of 17
SPAA MDD Change Proposal Form




            4 of 17
SPAA MDD Change Proposal Form




            5 of 17
                                  SPAA MDD Change Proposal Form




Section 3) MULTIPLE METER MODEL DETAILS



 The MDD Change Process can be used to add new meters to, or delete old meters from, the current              Key:
 version of the RGMA Market Domain Data. In the event the MDD Change Request is to change existing
 meter details which are incorrect, the incorrect meter details should be removed and the correct meter       Yellow Fields = Mandatory fields must be populated
 details should be added. All of MDD Attributes listed below should be included in the relevant format (see   Blue Fields = Conditional depending on answers provided. Refer to guidanc
 RGMA Processes and Data and Market Domain Data documents on the SPAA website). If the MDD                    Grey Fields = Optional Fields
 Change Request covers a number of meters please complete an additional sheet for each meter.


 3.1 If You wish to add or delete multiple Meter Models please complete the below table. Add additional lines where required


                                                 Measuring     Multiplication  Number of                        Units of                          Meter
   Product ID    Model Code     Manufacturer                                                    Pulse Value                     Meter Type
                                                 Capacity         Factor      Dials or Digits                   Measure                         Mechanism
     (A0109)      (A0083)       Code (A0060)                                                      (A0194)                        (A0025)
                                                  (A0112)        (A0120)         (A0121)                        (A0123)                        Code (A0085)




                                                         6 of 17
                                 SPAA MDD Change Proposal Form




Section 3) MULTIPLE METER MODEL DETAILS


 3.1 If You wish to add or delete multiple Converter Models please complete the below table. Add additional lines where required          Click Here to return to Main for

                                                Corrected      Corrected      Uncorrected Uncorrected
                                   Model
  Product ID     Model Code                    Multiplication  Number of      Multiplication  Number of       Correcting   Manufacturer
                                 description
   (A0109)        (A0083)                         Factor      Dials or Digits    Factor      Dials or Digits Basis (A0036) Code (A0060)
                                  (A0084)
                                                 (A0120)         (A0121)        (A0120)         (A0121)




                                                        7 of 17
                                                                                                 SPAA MDD Change Proposal Form




           Yellow Fields = Mandatory fields must be populated
           Blue Fields = Conditional depending on answers provided. Refer to guidance notes for info
           Grey Fields = Optional Fields




tional lines where required


                                                               Payment
                                                              Method Code           End Date
                                                                (A0163)




                                                                                                             8 of 17
                                    SPAA MDD Change Proposal Form




Click Here to return to Main form




                                                9 of 17
                              SPAA MDD Change Proposal Guide Notes for Sections 3 and 4

           Click to return to main proposal form

           Parties must use the MDD Proposal Form and Guidance Notes in conjunction with the guidelines set in
           Schedule 18



           Values for all of the meter specific MDD attributes below must be provided when raising an MDD Change
           Request to add/remove or amend a meter. Similarly values for all the market participant MDD attributes must
           be provided when raising a MDD Change Request to add, remove or change the role of a market participant.
           Section 3

           3.1 This section must be completed for the Addition/Deletion of Meter Models ONLY
           N.B - Indicate whether you wish to Add/Delete multiple Meter/Converter models. If you choose the option of
           Yes then click the hyperlink or Tab to the Multiple Meter Proposal Form. Also indicate the number of multiple
           models your proposal is seeking to delete or add. Otherwise continue with the current sheet.

           Yellow fields = Mandatory fields.
           Blue fields = Conditional Fields i.e. End Date should only be populated if the proposal is to remove the model
           from the live product table.
           Grey fields = Optional fields
           All fields should be completed accordingly for the submission to be accepted by the Secretariat
           Each field should be formatted as per the following
           Meter Specific     Attribute
                                          Format    Length Decimals                                       Description
           Requirements       Reference

             Product ID        A0109       Char      10       0       MDD defined value to identify a set of assets with common attributes.
            Model Code         A0083       Char      10       0       Code which uniquely identifies the model. Example: METUG
                                                                      The unique code of the manufacturer of the meter or other instrument
                                                                      configuration.

                                                                      Examples:-
            Manufacturer
                               A0060       Char       3       0       AM – ALDER & MACKAY
               Code
                                                                      BGW – BEGWACO.

                                                                      Format based on Transco’s legacy systems.


                                                                      The maximum volume of gas (Q Max) that can be put through an asset per
                                                                      hour, based on the manufacturers maximum value. This information is not on
                                                                      the asset itself, but is published (the manufactures maximum value). The
             Measuring
                               A0112      Number     10       4       service size will be one of the factors which determine the capacity of the
              Capacity
                                                                      asset required.

                                                                      Example: 6.
                                                                      The multiplication factor to apply to the resultant index advance indicated by
            Multiplication                                            the current reading. Format to allow for 1000.000
                               A0120      Number      6       3
               Factor
                                                                      Examples: 0.1, 1, 10, 100, 1000.

                                                                      Number of significant dials or digits on the asset which are considered during
                                                                      the asset reading. Used to validate asset readings and to determine the
                                                                      number of complete units consumed. For a converter this is the number of
             Number of
                               A0121      Integer     2       0       dials for the converted or unconverted register as indicated in the field above.
            Dials or Digits
                                                                      Where they are both the same, only the unconverted dials will be entered.

                                                                      Example: 5

             Pulse Value       A0194      Number      7       2       The number, or fraction of a Unit a pulse represents.
                                                                      Units in which the volume is expressed. At the time of writing legacy flows
              Units of
                               A0123       Char       5       0       contain a ‘Metric/Imperial’ indicator. This can be deduced from this field if it is
              Measure
                                                                      cu M (M) or cu ft (I).
                                                                      Code to define the type of meter. Defines the type of meter e.g. rotary,
                                                                      synthetic
             Meter Type        A0025       Char       5       0
                                                                      Examples: R, S
                                                                      The coded value describing the payment mechanism of the Meter.

                                                                      Examples: ETM (Electronic Token Meter). It also includes the Payment
                                                                      Method of CR (Credit) to align it with the legacy Transco Mechanism code
              Meter                                                   used for meters.
            Mechanism          A0085       Char       5       0
              Code                                                    Type of meter if Credit, otherwise distinct methods of payment supported by
                                                                      prepayment metering devices.
                                                                      Examples: Credit (CC), Prepayment (PP), Mechanical Token Meter (MTM),
                                                                      Electronic Token Meter (ET).


                                                                      The coded value describing the payment method of the product.

                                                                      Examples: PP (Prepayment), CR (Credit).
             Payment
                               A0163       Char       5       0
            Method Code                                               It is only applicable for Measuring Assets. This value is used with the status,
                                                                      for the relevant Measuring Assets to determine if billing of the Meter Point is
                                                                      credit or prepayment e.g. credit meter with a prepayment module which is
                                                                      active would be prepayment.




10 of 17
                                           This date represents the date the meter was decommissioned
           End Date   N/A   Date   6   0
                                           Format should be dd/mm/yy




11 of 17
           3.2 This section must be completed if the change is seeking to add a Converter Model

           Click to Return to Top of Page

           Meter Specific     Attribute
                                          Format    Length Decimals                                      Description
           Requirements       Reference
             Product ID        A0109       Char      10       0       MDD defined value to identify a set of assets with common attributes.
                                                                      Code which uniquely identifies the model.
             Model Code        A0083       Char      10       0
                                                                      Examples: METUG etc.
               Model
                               A0084       Char      100      0       Description of the Model
             description
                                                                      The multiplication factor to apply to the resultant index advance indicated by
                                                                      the current reading.
             Corrected
            Multiplication     A0120      Number      6       3
                                                                      Examples: 0.1, 1, 10, 100, 1000.
               Factor
                                                                      Format to allow for 1000.000

                                                                      Number of significant dials or digits on the asset which are considered during
                                                                      the asset reading. Used to validate asset readings and to determine the
             Corrected                                                number of complete units consumed. For a converter this is the number of
             Number of         A0121      Integer     2       0       dials for the converted or unconverted register as indicated in the field above.
            Dials or Digits                                           Where they are both the same, only the unconverted dials will be entered.

                                                                      Example: 5

                                                                      The multiplication factor to apply to the resultant index advance indicated by
                                                                      the current reading.
            Uncorrected
            Multiplication     A0120      Number      6       3
                                                                      Examples: 0.1, 1, 10, 100, 1000.
               Factor
                                                                      Format to allow for 1000.000

                                                                      Number of significant dials or digits on the asset which are considered during
                                                                      the asset reading. Used to validate asset readings and to determine the
            Uncorrected                                               number of complete units consumed. For a converter this is the number of
             Number of         A0121      Integer     2       0       dials for the converted or unconverted register as indicated in the field above.
            Dials or Digits                                           Where they are both the same, only the unconverted dials will be entered.

                                                                      Example; 5



                                                                      This is the conversion basis the converter is set up to convert against. The
                                                                      code indicates if the converter compensates for e.g. ’T’ Temperature.

                                                                      Amongst the wide range of converters produced one, some or all of the
                                                                      values identified within the C&D regs may be applied – pressure, temperature,
           Correcting Basis    A0036       Char       5       0       compressibility and/or density. The cost of the models will very according to
                                                                      this functionality. The majority of converters fitted at the current time convert
                                                                      for pressure, temperature and compressibility only. Compressibility and
                                                                      density conversion only applies above 2 bar metering pressure. Density
                                                                      conversion functionality tends to come with flow computers only and some of
                                                                      these models even take gas composition into account.


                                                                      The unique code of the manufacturer of the meter or other instrument
                                                                      configuration.

                                                                      Examples:-
            Manufacturer
                               A0060       Char       3       0       AM – ALDER & MACKAY
               Code
                                                                      BGW – BEGWACO.

                                                                      Format based on Transco’s legacy systems.




12 of 17
           Section 4
           Click to Return to Top of Page

           4.1 This section must be completed for the Addition/Delete of Market Participants ONLY
           4.2 This section must be completed if proposal seeks to amend an existing Market Participant value

           Yellow fields = Mandatory fields.
           Blue fields = Conditional Fields i.e. End Date should only be populated if the proposal is to remove the model
           from the live product table.
           Grey fields = Optional fields
           All fields should be completed accordingly for the submission to be accepted by the Secretariat
           Each field should be formatted as per the following
           Meter Specific   Attribute
                                        Format   Length Decimals                                      Description
           Requirements     Reference
              Market                                               A code identifying a Market Participant in a 3 character format to be used in
            Participant                                            the MDD market participant table
                             A0064       Char      3       0
            Abbreviated
               name                                                Example: TRA
                                                                   Text to describe the Market participant referenced in the Market Participant
              Market
                                                                   Code
             Participant     A0065       Char     50       0
               Name
                                                                   Example. National Grid


                                                                   Unique code which identifies the role the market participant is acting in.

                                                                   The Gas Act Owner of a Meter is identified by the link between the Role and
                                                                   Asset. The different Gas Act owners (Consumer, Supplier or Transporter)
                                                                   therefore each have a role in their own right (see 3. ‘External Documents’
                                                                   Section 2 ‘MDD Codes and Descriptions’).
             Role Code       A0126       Char      5       0
                                                                   The MAM must know the Gas Act Owner of any asset they are removing to
                                                                   notify their MAM of where they can pick up their asset.

                                                                   The MAM may need to know who the gas act owner is to identify whether they
                                                                   should be installing a Consumers, Suppliers or Transporters meter.

                                                                   Examples: SUPP, SHIP, TRAN, MAM, MAP


                                                                   Text to describe the Party or overall Parent Group Name of the Market
                                                                   participant. Only required if multiple licenses held within the MDD market
            Party Group                                            participant list or if Party Name is different to Participant name
                             A0066       Char     50       0
               Name
                                                                   Example: AEL has a market participant name of Gas Plus Supply Limited the
                                                                   Party Group Name is Npower Group
                                                                   This date represents the date the party ceased
              End Date       A0067       Date      6       0
                                                                   Format should be dd/mm/yy


                                                                   If the party raising the proposal is a MAM or MAP this filed must be
                                                                   completed. The code determines what type of default service is being offered
                                                                   by each MAM in order to facilitate correct appointment

                                                                   1. Offers MAM and MAP service
                                                                   2. Offers MAM and MAP service plus MAM only service
             3rd Party
                                                                   3. Offers MAM and MAP service plus MAM only service plus MAP only service
            Service Type     A0069      Number     1       0
                                                                   4. Offers MAM and MAP service plus MAP only service
                Code
                                                                   5. Offers MAM only service (does not provide the asset)
                                                                   6. Offers MAM only service plus MAP only service
                                                                   7. Offers MAP only service

                                                                   Parties are at liberty to offer services over and above these default codes




13 of 17
14 of 17
15 of 17
16 of 17
17 of 17

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:3/3/2012
language:English
pages:17